Changeset b7852c2 in rtems
- Timestamp:
- 11/18/99 13:58:02 (24 years ago)
- Branches:
- 4.10, 4.11, 4.8, 4.9, 5, master
- Children:
- dd9c6e0d
- Parents:
- 40fe60a3
- Files:
-
- 34 edited
Legend:
- Unmodified
- Added
- Removed
-
c/src/tests/tmtests/configure.in
r40fe60a3 rb7852c2 38 38 AC_SUBST(CC_LDFLAGS_PROFILE_V) 39 39 40 OPERATION_COUNT=${OPERATION_COUNT-100} 41 AC_SUBST(OPERATION_COUNT) 42 40 43 # Try to explicitly list a Makefile here 41 44 AC_OUTPUT( -
c/src/tests/tmtests/include/timesys.h
r40fe60a3 rb7852c2 22 22 * services. By default, the blocking time of 100 tasks will 23 23 * be measured. Small targets often do not have enough memory 24 * to create 100 tasks. By setting the BSP_MAXIMUM_OPERATION_COUNT 25 * to a lower number (typically 10), all of the time tests can be 26 * run. 24 * to create 100 tasks. By overriding the default OPERATION_COUNT 25 * with a lower number (typically 10 or less), all of the time tests 26 * can usually be run. This is stil not very fine-grained but 27 * is enough to significantly reduce memory consumption. 27 28 */ 28 29 29 #ifndef BSP_MAXIMUM_OPERATION_COUNT30 #ifndef OPERATION_COUNT 30 31 #define OPERATION_COUNT 100 31 #else32 #define OPERATION_COUNT BSP_MAXIMUM_OPERATION_COUNT33 32 #endif 34 33 … … 42 41 */ 43 42 44 #ifndef BSP_ITERATION_COUNT43 #ifndef IT_COUNT 45 44 #define IT_COUNT 100 46 #else47 #define IT_COUNT BSP_ITERATION_COUNT48 45 #endif 49 46 -
c/src/tests/tmtests/tm01/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm02/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm03/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm04/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm05/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm06/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm07/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm08/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm09/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm10/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm11/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm12/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm13/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm14/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm15/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm16/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm17/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm18/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm19/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm20/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm21/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm22/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm23/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm24/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm25/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm26/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm27/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 50 51 # since we essentially are building an interrupt handler, must use CFLAGS_OS_V -
c/src/tests/tmtests/tm28/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tm29/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tmck/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
c/src/tests/tmtests/tmoverhd/Makefile.in
r40fe60a3 rb7852c2 45 45 # 46 46 47 OPERATION_COUNT = @OPERATION_COUNT@ 47 48 DEFINES += 48 CPPFLAGS += -I$(srcdir)/../include 49 CPPFLAGS += -I$(srcdir)/../include -DOPERATION_COUNT=$(OPERATION_COUNT) 49 50 CFLAGS += 50 51 -
testsuites/tmtests/include/timesys.h
r40fe60a3 rb7852c2 22 22 * services. By default, the blocking time of 100 tasks will 23 23 * be measured. Small targets often do not have enough memory 24 * to create 100 tasks. By setting the BSP_MAXIMUM_OPERATION_COUNT 25 * to a lower number (typically 10), all of the time tests can be 26 * run. 24 * to create 100 tasks. By overriding the default OPERATION_COUNT 25 * with a lower number (typically 10 or less), all of the time tests 26 * can usually be run. This is stil not very fine-grained but 27 * is enough to significantly reduce memory consumption. 27 28 */ 28 29 29 #ifndef BSP_MAXIMUM_OPERATION_COUNT30 #ifndef OPERATION_COUNT 30 31 #define OPERATION_COUNT 100 31 #else32 #define OPERATION_COUNT BSP_MAXIMUM_OPERATION_COUNT33 32 #endif 34 33 … … 42 41 */ 43 42 44 #ifndef BSP_ITERATION_COUNT43 #ifndef IT_COUNT 45 44 #define IT_COUNT 100 46 #else47 #define IT_COUNT BSP_ITERATION_COUNT48 45 #endif 49 46
Note: See TracChangeset
for help on using the changeset viewer.