Changeset b3d1e6a in rtems-libbsd for libbsd.txt


Ignore:
Timestamp:
Mar 21, 2018, 8:23:17 AM (15 months ago)
Author:
Christian Mauderer <christian.mauderer@…>
Branches:
7ece7548c1b05cf6bb10e6708b83b2401d45c250, 29cc431e0bcfe059d65ac3019f53eeafa5064ae8
Children:
d300a34
Parents:
b2a210c
git-author:
Christian Mauderer <christian.mauderer@…> (03/21/18 08:23:17)
git-committer:
Christian Mauderer <christian.mauderer@…> (03/22/18 06:09:08)
Message:

config.inc: Remove unused values.

File:
1 edited

Legend:

Unmodified
Added
Removed
  • libbsd.txt

    rb2a210c rb3d1e6a  
    4343. Clone the Git repository +git clone git://git.rtems.org/rtems-libbsd.git+.
    4444. Change into the RTEMS BSD library root directory.
    45 . Edit the `config.inc` configuration file and adjust it to your environment.
     45. If you want to run tests with a custom IP configuration instead of the default
     46  one you can use an adjusted `config.inc` configuration file.
    4647. Run +waf configure ...+.
    4748. Run +waf+.
     
    120121to the README.waf file.
    121122
    122 ===== Example Configuration =====
    123 
    124 In the BSD library source directory edit the file `config.inc`.  Continuing on
    125 the above, the `config.inc` used to match the above is:
    126 
    127 -------------------------------------------------------------------------------
    128 # Mandatory: Select your BSP and installation prefix
    129 TARGET = arm-rtems4.12
    130 BSP = xilinx_zynq_a9_qemu
    131 PREFIX = $(HOME)/sandbox/install
    132 
    133 # Optional: Separate installation base directory
    134 INSTALL_BASE = $(PREFIX)/$(TARGET)/$(BSP)
    135 
    136 # Optional: Network test configuration
    137 TEST_RUNNER = $(BSP)
     123===== Example Configuration for Network Tests =====
     124
     125If you need some other IP configuration for the network tests that use a fixed
     126IP config you can copy `config.inc` to a location outside to the source tree and
     127adapt it. Then use the option `--net-test-config=NET_CONFIG` to pass the file to
     128waf's configure command.
     129
     130-------------------------------------------------------------------------------
    138131NET_CFG_SELF_IP = 10.0.0.2
    139132NET_CFG_NETMASK = 255.255.0.0
    140133NET_CFG_PEER_IP = 10.0.0.1
    141134NET_CFG_GATEWAY_IP = 10.0.0.1
    142 NET_TAP_INTERFACE = tap0
    143135-------------------------------------------------------------------------------
    144136
Note: See TracChangeset for help on using the changeset viewer.