Changeset b125b46 in rtems


Ignore:
Timestamp:
Jun 7, 2011, 1:38:54 PM (8 years ago)
Author:
Sebastian Huber <sebastian.huber@…>
Branches:
4.11, master
Children:
88dcb84
Parents:
e5da4340
Message:

2011-06-07 Sebastian Huber <sebastian.huber@…>

  • configure.ac, startup/bspstart.c: Use standard cache BSP options.
Location:
c/src/lib/libbsp/powerpc
Files:
6 edited

Legend:

Unmodified
Added
Removed
  • c/src/lib/libbsp/powerpc/gen5200/ChangeLog

    re5da4340 rb125b46  
     12011-06-07      Sebastian Huber <sebastian.huber@embedded-brains.de>
     2
     3        * configure.ac, startup/bspstart.c: Use standard cache BSP options.
     4
    152011-02-11      Ralf Corsépius <ralf.corsepius@rtems.org>
    26
  • c/src/lib/libbsp/powerpc/gen5200/configure.ac

    re5da4340 rb125b46  
    1616RTEMS_PROG_CCAS
    1717
    18 RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[*],[1])
    19 RTEMS_BSPOPTS_HELP([DATA_CACHE_ENABLE],
    20 [If defined, the data cache will be enabled after address translation
    21  is turned on.])
     18RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1])
     19RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED
    2220
    23 RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[1])
    24 RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
    25 [If defined, the instruction cache will be enabled after address translation
    26  is turned on.])
     21RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1])
     22RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED
    2723
    2824RTEMS_BSPOPTS_SET([BENCHMARK_IRQ_PROCESSING],[*],[0])
  • c/src/lib/libbsp/powerpc/gen5200/startup/bspstart.c

    re5da4340 rb125b46  
    150150   * Enable instruction and data caches. Do not force writethrough mode.
    151151   */
    152   #if INSTRUCTION_CACHE_ENABLE
     152  #if BSP_INSTRUCTION_CACHE_ENABLED
    153153    rtems_cache_enable_instruction();
    154154  #endif
    155   #if DATA_CACHE_ENABLE
     155  #if BSP_DATA_CACHE_ENABLED
    156156    rtems_cache_enable_data();
    157157  #endif
  • c/src/lib/libbsp/powerpc/gen83xx/ChangeLog

    re5da4340 rb125b46  
     12011-06-07      Sebastian Huber <sebastian.huber@embedded-brains.de>
     2
     3        * configure.ac, startup/bspstart.c: Use standard cache BSP options.
     4
    152011-02-11      Ralf Corsépius <ralf.corsepius@rtems.org>
    26
  • c/src/lib/libbsp/powerpc/gen83xx/configure.ac

    re5da4340 rb125b46  
    1616RTEMS_PROG_CCAS
    1717
    18 RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[*],[1])
    19 RTEMS_BSPOPTS_HELP([DATA_CACHE_ENABLE],
    20 [If defined, the data cache will be enabled after address translation
    21  is turned on.])
     18RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1])
     19RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED
    2220
    23 RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[1])
    24 RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
    25 [If defined, the instruction cache will be enabled after address translation
    26  is turned on.])
     21RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1])
     22RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED
    2723
    2824RTEMS_BSPOPTS_SET([MPC8313ERDB],[mpc8313erdb],[1])
     
    5955RTEMS_BSPOPTS_HELP([HAS_UBOOT],[If defined, enables U-Boot support.])
    6056
    61 RTEMS_BSPOPTS_SET([PPC_USE_DATA_CACHE],[*],[1])
    62 RTEMS_BSPOPTS_HELP([PPC_USE_DATA_CACHE], [If defined, then the PowerPC specific
    63  code in RTEMS will use data cache instructions to optimize the context switch code.])
    64 
    6557RTEMS_BSPOPTS_SET([GEN83XX_ENABLE_INTERRUPT_NESTING],[*],[1])
    6658RTEMS_BSPOPTS_HELP([GEN83XX_ENABLE_INTERRUPT_NESTING],[enable interrupt nesting])
  • c/src/lib/libbsp/powerpc/gen83xx/startup/bspstart.c

    re5da4340 rb125b46  
    9797   */
    9898
    99 #if INSTRUCTION_CACHE_ENABLE
     99#if BSP_INSTRUCTION_CACHE_ENABLED
    100100  rtems_cache_enable_instruction();
    101101#endif
    102102
    103 #if DATA_CACHE_ENABLE
     103#if BSP_DATA_CACHE_ENABLED
    104104  rtems_cache_enable_data();
    105105#endif
Note: See TracChangeset for help on using the changeset viewer.