Index: c/src/lib/libbsp/m68k/mvme147s/startup/bspstart.c
===================================================================
--- c/src/lib/libbsp/m68k/mvme147s/startup/bspstart.c	(revision afe99c27dbac7e76118108b5f33a5b0fc930580e)
+++ c/src/lib/libbsp/m68k/mvme147s/startup/bspstart.c	(revision afe99c27dbac7e76118108b5f33a5b0fc930580e)
@@ -0,0 +1,305 @@
+/*  bsp_start()
+ *
+ *  This routine starts the application.  It includes application,
+ *  board, and monitor specific initialization and configuration.
+ *  The generic CPU dependent initialization has been performed
+ *  before this routine is invoked.
+ *
+ *  INPUT:  NONE
+ *
+ *  OUTPUT: NONE
+ *
+ *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
+ *  On-Line Applications Research Corporation (OAR).
+ *  All rights assigned to U.S. Government, 1994.
+ *
+ *  This material may be reproduced by or for the U.S. Government pursuant
+ *  to the copyright license under the clause at DFARS 252.227-7013.  This
+ *  notice must appear in all copies of this file and its derivatives.
+ *
+ *  MVME147 port for TNI - Telecom Bretagne
+ *  by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr)
+ *  May 1996
+ *
+ *  $Id$
+ */
+
+#include <bsp.h>
+#include <rtems/libio.h>
+
+#include <libcsupport.h>
+
+#include <string.h>
+#include <fcntl.h>
+
+#ifdef STACK_CHECKER_ON
+#include <stackchk.h>
+#endif
+
+/*
+ *  The original table from the application and our copy of it with
+ *  some changes.
+ */
+
+extern rtems_configuration_table  Configuration;
+rtems_configuration_table         BSP_Configuration;
+
+rtems_cpu_table Cpu_table;
+
+char *rtems_progname;
+
+/*      Initialize whatever libc we are using
+ *      called from postdriver hook
+ */
+
+void bsp_libc_init()
+{
+    extern int end;
+    rtems_unsigned32        heap_start;
+
+    heap_start = (rtems_unsigned32) &end;
+    if (heap_start & (CPU_ALIGNMENT-1))
+        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
+
+    RTEMS_Malloc_Initialize((void *) heap_start, 64 * 1024, 0);
+
+    /*
+     *  Init the RTEMS libio facility to provide UNIX-like system
+     *  calls for use by newlib (ie: provide __open, __close, etc)
+     *  Uses malloc() to get area for the iops, so must be after malloc init
+     */
+
+    rtems_libio_init();
+
+    /*
+     * Set up for the libc handling.
+     */
+
+    if (BSP_Configuration.ticks_per_timeslice > 0)
+        libc_init(1);                /* reentrant if possible */
+    else
+        libc_init(0);                /* non-reentrant */
+}
+
+/*
+ *  Function:   bsp_pretasking_hook
+ *  Created:    95/03/10
+ *
+ *  Description:
+ *      BSP pretasking hook.  Called just before drivers are initialized.
+ *      Used to setup libc and install any BSP extensions.
+ *
+ *  NOTES:
+ *      Must not use libc (to do io) from here, since drivers are
+ *      not yet initialized.
+ *
+ */
+ 
+void
+bsp_pretasking_hook(void)
+{
+    bsp_libc_init();
+ 
+#ifdef STACK_CHECKER_ON
+    /*
+     *  Initialize the stack bounds checker
+     *  We can either turn it on here or from the app.
+     */
+ 
+    Stack_check_Initialize();
+#endif
+ 
+#ifdef RTEMS_DEBUG
+    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
+#endif
+}
+ 
+
+/*
+ * After drivers are setup, register some "filenames"
+ * and open stdin, stdout, stderr files
+ *
+ * Newlib will automatically associate the files with these
+ * (it hardcodes the numbers)
+ */
+ 
+void
+bsp_postdriver_hook(void)
+{
+  int stdin_fd, stdout_fd, stderr_fd;
+  int error_code;
+ 
+  error_code = 'S' << 24 | 'T' << 16;
+ 
+  if ((stdin_fd = __open("/dev/console", O_RDONLY, 0)) == -1)
+    rtems_fatal_error_occurred( error_code | 'D' << 8 | '0' );
+ 
+  if ((stdout_fd = __open("/dev/console", O_WRONLY, 0)) == -1)
+    rtems_fatal_error_occurred( error_code | 'D' << 8 | '1' );
+ 
+  if ((stderr_fd = __open("/dev/console", O_WRONLY, 0)) == -1)
+    rtems_fatal_error_occurred( error_code | 'D' << 8 | '2' );
+ 
+  if ((stdin_fd != 0) || (stdout_fd != 1) || (stderr_fd != 2))
+    rtems_fatal_error_occurred( error_code | 'I' << 8 | 'O' );
+}
+
+
+int main(
+  int argc,
+  char **argv,
+  char **environp
+)
+{
+  m68k_isr_entry *monitors_vector_table;
+  int             index;
+  rtems_unsigned8 node_number;
+
+  if ((argc > 0) && argv && argv[0])
+    rtems_progname = argv[0];
+  else
+    rtems_progname = "RTEMS";
+
+  monitors_vector_table = (m68k_isr_entry *)0;   /* 147Bug Vectors are at 0 */
+  m68k_set_vbr( monitors_vector_table );
+
+  for ( index=2 ; index<=255 ; index++ )
+    M68Kvec[ index ] = monitors_vector_table[ 32 ];
+
+  M68Kvec[  2 ] = monitors_vector_table[  2 ];   /* bus error vector */
+  M68Kvec[  4 ] = monitors_vector_table[  4 ];   /* breakpoints vector */
+  M68Kvec[  9 ] = monitors_vector_table[  9 ];   /* trace vector */
+  M68Kvec[ 47 ] = monitors_vector_table[ 47 ];   /* system call vector */
+
+  m68k_set_vbr( &M68Kvec );
+
+  pcc->int_base_vector = PCC_BASE_VECTOR & 0xF0; 
+  /* Set the PCC int vectors base */
+  
+  /* VME shared memory configuration */
+  /* Only the first node shares its top 128k DRAM */
+
+  vme_lcsr->utility_interrupt_vector = VME_BASE_VECTOR & 0xF8;
+  /* Set VMEchip base interrupt vector */
+  vme_lcsr->utility_interrupt_mask |= 0x02;
+  /* Enable SIGLP interruption (see shm support) */
+  pcc->general_purpose_control &= 0x10;
+  /* Enable VME master interruptions */
+  
+  if (vme_lcsr->system_controller & 0x01) {
+    /* the board is system controller */
+    vme_lcsr->system_controller = 0x08; 
+    /* Make VME access round-robin */
+  }
+
+  
+  node_number = 
+    (rtems_unsigned8) 
+    (Configuration.User_multiprocessing_table->node - 1) & 0xF;
+  /* Get and store node ID, first node_number = 0 */
+  vme_gcsr->board_identification = node_number;
+
+  vme_lcsr->gcsr_base_address = node_number;
+  /* Setup the base address of this board's gcsr */
+  vme_lcsr->timer_configuration = 0x6a;
+  /* Enable VME time outs, maximum periods */
+
+  if (node_number == 0) {
+    pcc->slave_base_address = 0x01;
+    /* Set local DRAM base address on the VME bus to the DRAM size */
+
+    vme_lcsr->vme_bus_requester = 0x80;
+    while (! (vme_lcsr->vme_bus_requester & 0x40));
+    /* Get VMEbus mastership */
+    vme_lcsr->slave_address_modifier = 0xfb;
+    /* Share everything */
+    vme_lcsr->slave_configuration = 0x80;
+    /* Share local DRAM */
+    vme_lcsr->vme_bus_requester = 0x0;
+    /* release bus */
+  } else {
+    pcc->slave_base_address = 0;
+    /* Set local DRAM base address on the VME bus to 0 */
+
+    vme_lcsr->vme_bus_requester = 0x80;
+    while (! (vme_lcsr->vme_bus_requester & 0x40));
+    /* Get VMEbus mastership */
+    vme_lcsr->slave_address_modifier = 0x08;
+    /* Share only the short adress range */
+    vme_lcsr->slave_configuration = 0;
+    /* Don't share local DRAM */
+    vme_lcsr->vme_bus_requester = 0x0;
+    /* release bus */
+  }
+
+  vme_lcsr->master_address_modifier = 0;
+  /* Automatically set the address modifier */
+  vme_lcsr->master_configuration = 1;
+  /* Disable D32 transfers : they don't work on my VMEbus rack */
+
+  m68k_enable_caching();
+
+  /*
+   *  we only use a hook to get the C library initialized.
+   */
+
+  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
+
+  Cpu_table.predriver_hook = NULL;
+
+  Cpu_table.postdriver_hook = bsp_postdriver_hook;
+
+  Cpu_table.idle_task = NULL;  /* do not override system IDLE task */
+
+  Cpu_table.do_zero_of_workspace = TRUE;
+
+  Cpu_table.interrupt_vector_table = (m68k_isr_entry *) &M68Kvec;
+
+  Cpu_table.interrupt_stack_size = 4096;
+
+  Cpu_table.extra_mpci_receive_server_stack = 0;
+
+  /*
+   *  Copy the table
+   */
+
+  BSP_Configuration = Configuration;
+
+  BSP_Configuration.work_space_start = (void *)
+     (RAM_END - BSP_Configuration.work_space_size);
+
+  /*
+   * Add 1 region for the RTEMS Malloc
+   */
+
+  BSP_Configuration.RTEMS_api_configuration->maximum_regions++;
+
+  /*
+   * Add 1 extension for newlib libc
+   */
+
+#ifdef RTEMS_NEWLIB
+    BSP_Configuration.maximum_extensions++;
+#endif
+
+  /*
+   * Add another extension if using the stack checker
+   */
+
+#ifdef STACK_CHECKER_ON
+    BSP_Configuration.maximum_extensions++;
+#endif
+
+  /*
+   * Tell libio how many fd's we want and allow it to tweak config
+   */
+
+  rtems_libio_config(&BSP_Configuration, BSP_LIBIO_MAX_FDS);
+
+  rtems_initialize_executive( &BSP_Configuration, &Cpu_table );
+  /* does not return */
+
+  bsp_cleanup();
+
+  return 0;
+}
Index: c/src/lib/libbsp/m68k/mvme147s/startup/linkcmds
===================================================================
--- c/src/lib/libbsp/m68k/mvme147s/startup/linkcmds	(revision afe99c27dbac7e76118108b5f33a5b0fc930580e)
+++ c/src/lib/libbsp/m68k/mvme147s/startup/linkcmds	(revision afe99c27dbac7e76118108b5f33a5b0fc930580e)
@@ -0,0 +1,52 @@
+/*
+ *  This file contains directives for the GNU linker which are specific
+ *  to the Motorola MVME147 boards.
+ *
+ *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
+ *  On-Line Applications Research Corporation (OAR).
+ *  All rights assigned to U.S. Government, 1994.
+ *
+ *  This material may be reproduced by or for the U.S. Government pursuant
+ *  to the copyright license under the clause at DFARS 252.227-7013.  This
+ *  notice must appear in all copies of this file and its derivatives.
+ *
+ *  MVME147 port for TNI - Telecom Bretagne
+ *  by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr)
+ *  May 1996
+ *
+ *  $Id$
+ */
+
+MEMORY
+	{
+	ram : org = 0x7000, l = 0x3d8fff
+	}
+
+SECTIONS
+{
+        .text 0x7000 :
+	{
+	    text_start = . ;
+	    _text_start = . ;
+            *(.text)
+	    etext = ALIGN( 0x10 ) ;
+	    _etext = .;
+        }
+        .data ADDR( .text ) + SIZEOF( .text ):
+	{
+	    data_start = . ;
+            _data_start = .;
+            *(.data)
+	    edata = ALIGN( 0x10 ) ;
+            _edata = .;
+        }
+        .bss ADDR( .data ) + SIZEOF( .data ):
+        {
+	    bss_start = . ;
+	    _bss_start = . ;
+	    *(.bss)
+	    *(COMMON)
+	    end = . ;
+	    _end = . ;
+	}
+}
