Index: c/src/lib/libbsp/powerpc/ChangeLog
===================================================================
--- c/src/lib/libbsp/powerpc/ChangeLog	(revision d2df5ee0f2d3a64c5b03919165c94c7769fff6a9)
+++ c/src/lib/libbsp/powerpc/ChangeLog	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -1,2 +1,8 @@
+2004-10-20	Eric Norum <norume@aps.anl.gov>
+
+	* acinclude.m4:        Add mvme5500 BSP
+	* configure.ac
+	* mvme5500/.......
+
 2004-09-24	Ralf Corsepius <ralf_corsepius@rtems.org>
 
Index: c/src/lib/libbsp/powerpc/acinclude.m4
===================================================================
--- c/src/lib/libbsp/powerpc/acinclude.m4	(revision d2df5ee0f2d3a64c5b03919165c94c7769fff6a9)
+++ c/src/lib/libbsp/powerpc/acinclude.m4	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -17,4 +17,6 @@
   mpc8260ads )
     AC_CONFIG_SUBDIRS([mpc8260ads]);;
+  mvme5500 )
+    AC_CONFIG_SUBDIRS([mvme5500]);;
   ppcn_60x )
     AC_CONFIG_SUBDIRS([ppcn_60x]);;
Index: c/src/lib/libbsp/powerpc/configure.ac
===================================================================
--- c/src/lib/libbsp/powerpc/configure.ac	(revision d2df5ee0f2d3a64c5b03919165c94c7769fff6a9)
+++ c/src/lib/libbsp/powerpc/configure.ac	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -18,5 +18,6 @@
 RTEMS_CHECK_BSPDIR([$RTEMS_BSP_FAMILY])
 
-AM_CONDITIONAL(need_shared, test "$RTEMS_BSP_FAMILY" = "motorola_powerpc")
+AM_CONDITIONAL(need_shared, test "$RTEMS_BSP_FAMILY" = "motorola_powerpc" \
+                         || test "$RTEMS_BSP_FAMILY" = "mvme5500")
 
 # Explicitly list all Makefiles here
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/GT64260TWSI.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/GT64260TWSI.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/GT64260TWSI.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,210 @@
+/* GT64260TWSI.c : Two-Wire Serial Interface (TWSI) support for the GT64260
+ *
+ * Copyright (c) 2004, Brookhaven National Laboratory and
+ *                 Shuchen Kate Feng <feng1@bnl.gov>
+ * All rights reserved.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution.
+ *
+ * See section 24:TWSI interface of "the GT-64260B System Controller
+ * for powerPc Processors Data Sheet".
+ *
+ * For full TWSI protocol description look in Philips Semiconductor
+ * TWSI spec.
+ *
+ * We need it to read out I2C devices used for the MVME5500 
+ * (eg. the memory SPD and VPD). 
+ *
+ */
+#include <libcpu/spr.h>  /*registers.h included here for rtems_bsp_delay()*/
+#include <libcpu/io.h>
+#include <rtems/bspIo.h>	    /* printk */
+
+#include "bsp/gtreg.h"
+#include "bsp/GT64260TWSI.h"
+
+#define MAX_LOOP 100
+
+#define TWSI_DEBUG 0
+
+int TWSI_initFlg = 0;	/* TWSI Initialization Flag */
+
+void GT64260TWSIinit()
+{
+
+  if ( !TWSI_initFlg) {
+#if TWSI_DEBUG
+     printk("GT64260TWSIinit(");
+#endif
+     outl( 0, TWSI_SFT_RST); /* soft reset */
+     rtems_bsp_delay(1000);
+
+     /* See 24.2.5 : Assume bus speed is 133MHZ
+      * Try to be close to the default frequency : 62.5KHZ
+      * value 0x2c: 69.27 KHz TWSI bus clock 
+      */  
+     outl(0x2c, TWSI_BAUDE_RATE);
+     rtems_bsp_delay(1000);
+
+     /* Set Acknowledge and enable TWSI in the Control register */
+     outl(0x44, TWSI_CTRL);
+     rtems_bsp_delay(4000);
+     TWSI_initFlg = 1;
+#if TWSI_DEBUG
+     printk(")\n");
+#endif
+  }     
+}
+
+/* return the interrupt flag */
+int GT64260TWSIintFlag() 
+{
+  unsigned int loop;
+
+  for (loop = 0; loop < MAX_LOOP; loop++ ) {
+    /* Return 1 if the interrupt flag is set */
+      if (inl(TWSI_CTRL) & TWSI_INTFLG) return(1);
+      rtems_bsp_delay(1000);
+  }
+  return(0);
+}
+
+int GT64260TWSIstop() 
+{
+
+#if TWSI_DEBUG
+  printk("GT64260TWSIstop(");
+#endif
+
+  outl((inl(TWSI_CTRL) | TWSI_STOP), TWSI_CTRL);
+  rtems_bsp_delay(1000);
+
+  /* Check if interrupt flag bit is set*/
+  if (GT64260TWSIintFlag()) {
+     outl((inl( TWSI_CTRL) & ~TWSI_INTFLG), TWSI_CTRL);
+     rtems_bsp_delay(1000);
+#if TWSI_DEBUG
+     printk(")\n");
+#endif
+     return(0);
+  }
+#if TWSI_DEBUG
+     printk("NoIntFlag\n");
+#endif
+  return(-1);
+}
+
+int GT64260TWSIstart()
+{
+  unsigned int loop;	
+  unsigned int status;	
+
+#if TWSI_DEBUG
+  printk("GT64260TWSIstart(");
+#endif
+  /* Initialize the TWSI interface */
+  GT64260TWSIinit();
+
+  /* set the start bit */
+  outl((TWSI_START | TWSI_TWSIEN), TWSI_CTRL);
+  rtems_bsp_delay(1000);
+
+  if (GT64260TWSIintFlag()) {
+     /* Check for completion of START sequence */
+     for (loop = 0; loop<MAX_LOOP; loop++ ) {
+         /* if (start condition transmitted) || 
+          *    (repeated start condition transmitted )
+          */
+         if (((status= inl( TWSI_STATUS)) == 8) || (status == 0x10)) {
+#if TWSI_DEBUG
+             printk(")");
+#endif
+             return(0);
+         }
+         rtems_bsp_delay(1000);
+     }
+  }
+  /* if loop ends or intFlag ==0 */
+  GT64260TWSIstop();
+  return(-1);
+}
+
+int GT64260TWSIread(unsigned char * pData,int lastByte) 
+{
+  unsigned int loop;		
+
+#if TWSI_DEBUG
+  printk("GT64260TWSIread(");
+#endif
+  /* Clear INTFLG and set ACK and ENABLE bits */
+  outl((TWSI_ACK | TWSI_TWSIEN), TWSI_CTRL);
+  rtems_bsp_delay(1000);
+
+  if (GT64260TWSIintFlag()) {
+     for (loop = 0; loop< MAX_LOOP; loop++) {
+       /* if Master received read data, acknowledge transmitted */
+       if ( (inl( TWSI_STATUS) == 0x50)) {
+	   *pData = (unsigned char) inl( TWSI_DATA); 
+   	   rtems_bsp_delay(1500);
+
+           /* Clear INTFLAG and set Enable bit only */
+	   if (lastByte) outl(TWSI_TWSIEN, TWSI_CTRL);
+	   rtems_bsp_delay(1500);
+#if TWSI_DEBUG
+  printk(")\n");
+#endif
+	   return(0);
+	}
+	rtems_bsp_delay(1000);
+     } /* end for */
+  }
+  /* if loop ends or intFlag ==0 */
+  GT64260TWSIstop();
+  return(-1);
+}
+
+/* do a TWSI write cycle on the TWSI bus*/
+int GT64260TWSIwrite(unsigned char Data) 
+{
+  unsigned int loop;		
+  unsigned int status;	
+
+#if TWSI_DEBUG
+  printk("GT64260TWSIwrite(");
+#endif
+  /* Write data into the TWSI data register */
+  outl(((unsigned int) Data), TWSI_DATA); 
+  rtems_bsp_delay(1000);
+
+  /* Clear INTFLG in the control register to drive data onto TWSI bus */
+  outl(0, TWSI_CTRL);
+  rtems_bsp_delay(1000);
+
+  if (GT64260TWSIintFlag() ) {
+     for (loop = 0; loop< MAX_LOOP; loop++) {
+	 rtems_bsp_delay(1000);
+	 /* if address + write bit transmitted, acknowledge not received */
+	 if ( (status = inl( TWSI_STATUS)) == 0x20) {
+            /* No device responding, generate STOP and return -1 */
+	   printk("no device responding\n");
+	    GT64260TWSIstop();
+	    return(-1);
+	 }
+         /* if (address + write bit transmitted, acknowledge received)
+	  *    (Master transmmitted data byte, acknowledge received) 
+          *    (address + read bit transmitted, acknowledge received)
+          */
+	 if ((status == 0x18)||(status == 0x28)||(status == 0x40)) {
+#if TWSI_DEBUG
+	      printk(")\n");
+#endif
+	      return(0);
+         }
+	 rtems_bsp_delay(1000);
+     } /* end for */
+  }
+  printk("No correct status, timeout\n");
+  GT64260TWSIstop();
+  return(-1);
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/GT64260TWSI.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/GT64260TWSI.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/GT64260TWSI.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,9 @@
+/* GT64260TWSI.h -  header for the GT64260 Two-Wire Serial Interface */
+
+/* TWSI Control Register Bits */
+#define TWSI_ACK	   4
+#define TWSI_INTFLG	   8
+#define TWSI_STOP       0x10
+#define TWSI_START      0x20
+#define TWSI_TWSIEN     0x40
+#define TWSI_INTEN      0x80
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/MVME5500I2C.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/MVME5500I2C.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/MVME5500I2C.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,100 @@
+/* MVME5500I2C.c
+ *
+ * Copyright (c) 2003, 2004 Brookhaven National Laboratory
+ * Author:    S. Kate Feng <feng1@bnl.gov>
+ * All rights reserved.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution.
+ *
+ * To read inoformation of the EEPROM via the I2C
+ *
+ */
+
+#include <rtems/bspIo.h>	    /* printk */
+#include "bsp/GT64260TWSI.h"
+
+/* #define I2C_DEBUG*/
+typedef unsigned int u32;
+typedef unsigned char unchar;
+
+unchar I2cAddrPack(unchar busAddr,u32 offset)
+{
+  return(busAddr | ((offset & 0x700) >> 7));
+}
+unchar I2cDevByteAddr(u32 devA2A1A0, unchar byteNum)
+{
+  return(( devA2A1A0 >>(byteNum*8)) & 0xff);
+}
+/****************************************************************************
+* I2Cread_eeprom - read EEPROM VPD from the I2C
+*/
+int I2Cread_eeprom(unchar I2cBusAddr,u32 devA2A1A0,u32 AddrBytes,unchar *pBuff,u32 numBytes)
+{
+  int status=0, lastByte=0;
+
+  switch (AddrBytes) {
+    case 1:
+      if ((status=GT64260TWSIstart()) != -1) {
+	if ((status=GT64260TWSIwrite(I2cAddrPack(I2cBusAddr,devA2A1A0)))!= -1){
+	  if ((status=GT64260TWSIwrite(devA2A1A0))!=-1){
+	    if ((status=GT64260TWSIstart())!=-1)
+	        status=GT64260TWSIwrite(I2cAddrPack((I2cBusAddr|0x01),devA2A1A0));
+	  }
+        }
+      }
+      break;
+    case 2:
+      if ((status=GT64260TWSIstart())!=-1) {
+	if ((status=GT64260TWSIwrite(I2cBusAddr))!= -1) {
+	  if ((status=GT64260TWSIwrite(I2cDevByteAddr(devA2A1A0,1)))!=-1) {
+	    if ((status=GT64260TWSIwrite(I2cDevByteAddr(devA2A1A0,0)))!= -1){
+	      if ((status=GT64260TWSIstart()) != -1) {
+		status = GT64260TWSIwrite((I2cBusAddr | 0x01));
+              }
+            }
+          }
+        }
+      }
+      break;
+    case 3:
+      if ((status = GT64260TWSIstart())!= -1) {
+	if ((status = GT64260TWSIwrite(I2cBusAddr))!= -1) {
+	  if ((status=GT64260TWSIwrite(I2cDevByteAddr(devA2A1A0,2)))!= -1){
+	    if ((status=GT64260TWSIwrite(I2cDevByteAddr(devA2A1A0,1)))!= -1){
+	      if ((status=GT64260TWSIwrite(I2cDevByteAddr(devA2A1A0,0)))!= -1){
+  	        if ((status=GT64260TWSIstart())!= -1) {
+		  status = GT64260TWSIwrite(I2cBusAddr | 0x01);
+                }
+              }
+            }
+          }
+        }
+      }
+      break;
+    default: 
+      status=-1;
+      break;  
+  }
+  if (status !=-1) {
+#ifdef I2C_DEBUG
+     printk("\n");
+#endif
+     /* read data from device */
+     for ( ; numBytes > 0; numBytes-- ) {      
+       if ( numBytes == 1) lastByte=1;
+       if (GT64260TWSIread(pBuff,lastByte) == -1) return (-1);
+#ifdef I2C_DEBUG
+       printk("%2x ", *pBuff);
+       if ( (numBytes % 20)==0 ) printk("\n");
+#endif
+       pBuff++;	
+     }
+#ifdef I2C_DEBUG
+     printk("\n");
+#endif
+     if (GT64260TWSIstop() == -1) return (-1);
+  }
+  return (status);
+}
+
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,52 @@
+##
+## $Id: Makefile.am, S. Kate Feng /12/03
+##
+
+VPATH = @srcdir@:
+
+INCLUDES = -I @srcdir@/../GT64260
+
+C_FILES = GT64260TWSI.c MVME5500I2C.c
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = bspMvme5500.h gtreg.h GT64260TWSI.h VPD.h
+
+H_FILES = bspMvme5500.h gtreg.h GT64260TWSI.h VPD.h
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = GT64260TWSI.c MVME5500I2C.c
+
+OBJS = $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $<
+
+$(PROJECT_INCLUDE)/bsp/bspMvme5500.h: bspMvme5500.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/gtreg.h: gtreg.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/GT64260TWSI.h: GT64260TWSI.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/VPD.h: VPD.h
+	$(INSTALL_DATA) $< $@
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/bspMvme5500.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/gtreg.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/GT64260TWSI.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/VPD.h
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,601 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+INCLUDES = -I @srcdir@/../GT64260
+
+C_FILES = GT64260TWSI.c MVME5500I2C.c
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = bspMvme5500.h gtreg.h GT64260TWSI.h VPD.h
+
+H_FILES = bspMvme5500.h gtreg.h GT64260TWSI.h VPD.h
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = GT64260TWSI.c MVME5500I2C.c
+
+OBJS = $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/bspMvme5500.h $(PROJECT_INCLUDE)/bsp/gtreg.h $(PROJECT_INCLUDE)/bsp/GT64260TWSI.h $(PROJECT_INCLUDE)/bsp/VPD.h
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = GT64260
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_bsp_HEADERS)
+
+DIST_COMMON = $(include_bsp_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  GT64260/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+include_bspHEADERS_INSTALL = $(INSTALL_HEADER)
+install-include_bspHEADERS: $(include_bsp_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f"; \
+	  $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+uninstall-include_bspHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(include_bspdir)/$$f"; \
+	  rm -f $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-include_bspHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-include_bspHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic clean-local ctags distclean distclean-generic \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-include_bspHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-include_bspHEADERS uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $<
+
+$(PROJECT_INCLUDE)/bsp/bspMvme5500.h: bspMvme5500.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/gtreg.h: gtreg.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/GT64260TWSI.h: GT64260TWSI.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/VPD.h: VPD.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/VPD.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/VPD.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/VPD.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,11 @@
+/* The mapping of the Configuration VPD
+ *
+ * (C) 2004, NSLS, Brookhaven National Laboratory,
+ *           S. Kate Feng, <feng1@bnl.gov>
+ *
+ */
+
+extern unsigned char ConfVPD_buff[200];
+
+#define VPD_ENET0_OFFSET  0x3c
+#define VPD_ENET1_OFFSET  0x45
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/bspMvme5500.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/bspMvme5500.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/bspMvme5500.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,15 @@
+/* GT64260 register base mapping on the MVME5500
+ *
+ * (C) Shuchen K. Feng <feng1@bnl.gov>,NSLS, 
+ * Brookhaven National Laboratory, 2003
+ *
+ */
+#define _256M           0x10000000
+#define _512M           0x20000000
+
+#define GT64260_REG_BASE	0xf1000000  /* Base of GT64260 Reg Space */
+#define GT64260_REG_SPACE_SIZE	0x10000     /* 64Kb Internal Reg Space */
+
+#define GT64260_DEV1_BASE       0xf1100000  /* Device bank1(chip select 1) base
+                                             */
+#define GT64260_DEV1_SIZE 	0x00100000 /* Device bank size */
Index: c/src/lib/libbsp/powerpc/mvme5500/GT64260/gtreg.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/GT64260/gtreg.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/GT64260/gtreg.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,811 @@
+/*	$NetBSD: gtreg.h,v 1.1 2003/03/05 22:08:22 matt Exp $	*/
+
+/*
+ * Copyright (c) 2002 Allegro Networks, Inc., Wasabi Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software developed for the NetBSD Project by
+ *      Allegro Networks, Inc., and Wasabi Systems, Inc.
+ * 4. The name of Allegro Networks, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ * 5. The name of Wasabi Systems, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ALLEGRO NETWORKS, INC. AND
+ * WASABI SYSTEMS, INC. ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL EITHER ALLEGRO NETWORKS, INC. OR WASABI SYSTEMS, INC.
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _DISCOVERY_DEV_GTREG_H_
+#define _DISCOVERY_DEV_GTREG_H_
+
+#define GT__BIT(bit)			(1U << (bit))
+#define GT__MASK(bit)			(GT__BIT(bit) - 1)
+#define	GT__EXT(data, bit, len)		(((data) >> (bit)) & GT__MASK(len))
+#define	GT__CLR(data, bit, len)		((data) &= ~(GT__MASK(len) << (bit)))
+#define	GT__INS(new, bit)		((new) << (bit))
+
+
+/* 
+ * Table 30: CPU Address Decode Register Map
+ */
+#define GT_SCS0_Low_Decode		0x0008 
+#define GT_SCS0_High_Decode		0x0010 
+#define GT_SCS1_Low_Decode		0x0208 
+#define GT_SCS1_High_Decode		0x0210 
+#define GT_SCS2_Low_Decode		0x0018 
+#define GT_SCS2_High_Decode		0x0020 
+#define GT_SCS3_Low_Decode		0x0218 
+#define GT_SCS3_High_Decode		0x0220 
+#define GT_CS0_Low_Decode		0x0028 
+#define GT_CS0_High_Decode		0x0030 
+#define GT_CS1_Low_Decode		0x0228 
+#define GT_CS1_High_Decode		0x0230 
+#define GT_CS2_Low_Decode		0x0248 
+#define GT_CS2_High_Decode		0x0250 
+#define GT_CS3_Low_Decode		0x0038 
+#define GT_CS3_High_Decode		0x0040 
+#define GT_BootCS_Low_Decode		0x0238 
+#define GT_BootCS_High_Decode		0x0240 
+#define GT_PCI0_IO_Low_Decode		0x0048 
+#define GT_PCI0_IO_High_Decode		0x0050 
+#define GT_PCI0_Mem0_Low_Decode		0x0058 
+#define GT_PCI0_Mem0_High_Decode	0x0060 
+#define GT_PCI0_Mem1_Low_Decode		0x0080 
+#define GT_PCI0_Mem1_High_Decode	0x0088 
+#define GT_PCI0_Mem2_Low_Decode		0x0258 
+#define GT_PCI0_Mem2_High_Decode	0x0260 
+#define GT_PCI0_Mem3_Low_Decode		0x0280 
+#define GT_PCI0_Mem3_High_Decode	0x0288 
+#define GT_PCI1_IO_Low_Decode		0x0090 
+#define GT_PCI1_IO_High_Decode		0x0098 
+#define GT_PCI1_Mem0_Low_Decode		0x00a0 
+#define GT_PCI1_Mem0_High_Decode	0x00a8 
+#define GT_PCI1_Mem1_Low_Decode		0x00b0 
+#define GT_PCI1_Mem1_High_Decode	0x00b8 
+#define GT_PCI1_Mem2_Low_Decode		0x02a0 
+#define GT_PCI1_Mem2_High_Decode	0x02a8 
+#define GT_PCI1_Mem3_Low_Decode		0x02b0 
+#define GT_PCI1_Mem3_High_Decode	0x02b8 
+#define GT_Internal_Decode		0x0068 
+#define GT_CPU0_Low_Decode		0x0290 
+#define GT_CPU0_High_Decode		0x0298 
+#define GT_CPU1_Low_Decode		0x02c0 
+#define GT_CPU1_High_Decode		0x02c8 
+#define GT_PCI0_IO_Remap		0x00f0 
+#define GT_PCI0_Mem0_Remap_Low		0x00f8 
+#define GT_PCI0_Mem0_Remap_High		0x0320 
+#define GT_PCI0_Mem1_Remap_Low		0x0100 
+#define GT_PCI0_Mem1_Remap_High		0x0328 
+#define GT_PCI0_Mem2_Remap_Low		0x02f8 
+#define GT_PCI0_Mem2_Remap_High		0x0330 
+#define GT_PCI0_Mem3_Remap_Low		0x0300 
+#define GT_PCI0_Mem3_Remap_High		0x0338 
+#define GT_PCI1_IO_Remap		0x0108 
+#define GT_PCI1_Mem0_Remap_Low		0x0110 
+#define GT_PCI1_Mem0_Remap_High		0x0340 
+#define GT_PCI1_Mem1_Remap_Low		0x0118 
+#define GT_PCI1_Mem1_Remap_High		0x0348 
+#define GT_PCI1_Mem2_Remap_Low		0x0310 
+#define GT_PCI1_Mem2_Remap_High		0x0350 
+#define GT_PCI1_Mem3_Remap_Low		0x0318 
+#define GT_PCI1_Mem3_Remap_High		0x0358 
+
+
+/*
+ * Table 31: CPU Control Register Map
+ */
+#define GT_CPU_Cfg			0x0000 
+#define GT_CPU_Mode			0x0120 
+#define GT_CPU_Master_Ctl		0x0160 
+#define GT_CPU_If_Xbar_Ctl_Low		0x0150 
+#define GT_CPU_If_Xbar_Ctl_High		0x0158 
+#define GT_CPU_If_Xbar_Timeout		0x0168 
+#define GT_CPU_Rd_Rsp_Xbar_Ctl_Low	0x0170 
+#define GT_CPU_Rd_Rsp_Xbar_Ctl_High	0x0178 
+
+/*
+ * Table 32: CPU Sync Barrier Register Map
+ */
+#define	GT_PCI_Sync_Barrier(bus)	(0x00c0 | ((bus) << 3))
+#define GT_PCI0_Sync_Barrier		0x00c0 
+#define GT_PCI1_Sync_Barrier		0x00c8 
+
+/*
+ * Table 33: CPU Access Protection Register Map
+ */
+#define GT_Protect_Low_0		0x0180 
+#define GT_Protect_High_0		0x0188 
+#define GT_Protect_Low_1		0x0190 
+#define GT_Protect_High_1		0x0198 
+#define GT_Protect_Low_2		0x01a0 
+#define GT_Protect_High_2		0x01a8 
+#define GT_Protect_Low_3		0x01b0 
+#define GT_Protect_High_3		0x01b8 
+#define GT_Protect_Low_4		0x01c0 
+#define GT_Protect_High_4		0x01c8 
+#define GT_Protect_Low_5		0x01d0 
+#define GT_Protect_High_5		0x01d8 
+#define GT_Protect_Low_6		0x01e0 
+#define GT_Protect_High_6		0x01e8 
+#define GT_Protect_Low_7		0x01f0 
+#define GT_Protect_High_7		0x01f8 
+
+/*
+ * Table 34: Snoop Control Register Map
+ */
+#define GT_Snoop_Base_0			0x0380 
+#define GT_Snoop_Top_0			0x0388 
+#define GT_Snoop_Base_1			0x0390 
+#define GT_Snoop_Top_1			0x0398 
+#define GT_Snoop_Base_2			0x03a0 
+#define GT_Snoop_Top_2			0x03a8 
+#define GT_Snoop_Base_3			0x03b0 
+#define GT_Snoop_Top_3			0x03b8 
+
+/*
+ * Table 35: CPU Error Report Register Map
+ */
+#define GT_CPU_Error_Address_Low	0x0070 
+#define GT_CPU_Error_Address_High	0x0078 
+#define GT_CPU_Error_Data_Low		0x0128 
+#define GT_CPU_Error_Data_High		0x0130 
+#define GT_CPU_Error_Parity		0x0138 
+#define GT_CPU_Error_Cause		0x0140 
+#define GT_CPU_Error_Mask		0x0148 
+
+#define	GT_DecodeAddr_SET(g, r, v)					\
+	do { 								\
+		gt_read((g), GT_Internal_Decode);			\
+		gt_write((g), (r), ((v) & 0xfff00000) >> 20);		\
+		while ((gt_read((g), (r)) & 0xfff) != ((v) >> 20));	\
+	} while (0)
+
+#define	GT_LowAddr_GET(v)		 (GT__EXT((v), 0, 12) << 20)
+#define	GT_HighAddr_GET(v)		((GT__EXT((v), 0, 12) << 20) | 0xfffff)
+
+#define GT_MPP_Control0			0xf000
+#define GT_MPP_Control1			0xf004
+#define GT_MPP_Control2			0xf008
+#define GT_MPP_Control3			0xf00c
+
+/* <skf> added */
+#define GT_MPP_SerialPortMultiplex      0xf010
+
+#define	GT_GPP_IO_Control		0xf100
+#define	GT_GPP_Level_Control		0xf110
+#define GT_GPP_Value			0xf104
+#define	GT_GPP_Interrupt_Cause		0xf108
+#define GT_GPP_Interrupt_Mask		0xf10c
+/*
+ * Table 36: SCS[0]* Low Decode Address, Offset: 0x008
+ * Table 38: SCS[1]* Low Decode Address, Offset: 0x208
+ * Table 40: SCS[2]* Low Decode Address, Offset: 0x018
+ * Table 42: SCS[3]* Low Decode Address, Offset: 0x218
+ * Table 44: CS[0]*  Low Decode Address, Offset: 0x028
+ * Table 46: CS[1]*  Low Decode Address, Offset: 0x228
+ * Table 48: CS[2]*  Low Decode Address, Offset: 0x248
+ * Table 50: CS[3]*  Low Decode Address, Offset: 0x038
+ * Table 52: BootCS* Low Decode Address, Offset: 0x238
+ * Table 75: CPU 0   Low Decode Address, Offset: 0x290
+ * Table 77: CPU 1   Low Decode Address, Offset: 0x2c0
+ *
+ * 11:00 LowAddr		SCS[0] Base Address
+ * 31:12 Reserved		Must be 0.
+ */
+
+/*
+ * Table 37: SCS[0]* High Decode Address, Offset: 0x010
+ * Table 39: SCS[1]* High Decode Address, Offset: 0x210
+ * Table 41: SCS[2]* High Decode Address, Offset: 0x020
+ * Table 43: SCS[3]* High Decode Address, Offset: 0x220
+ * Table 45: CS[0]*  High Decode Address, Offset: 0x030
+ * Table 47: CS[1]*  High Decode Address, Offset: 0x230
+ * Table 49: CS[2]*  High Decode Address, Offset: 0x250
+ * Table 51: CS[3]*  High Decode Address, Offset: 0x040
+ * Table 53: BootCS* High Decode Address, Offset: 0x240
+ * Table 76: CPU 0   High Decode Address, Offset: 0x298
+ * Table 78: CPU 1   High Decode Address, Offset: 0x2c8
+ *
+ * 11:00 HighAddr		SCS[0] Top Address
+ * 31:12 Reserved
+ */
+
+/*
+ * Table 54: PCI_0 I/O Low Decode Address,      Offset: 0x048
+ * Table 56: PCI_0 Memory 0 Low Decode Address, Offset: 0x058
+ * Table 58: PCI_0 Memory 1 Low Decode Address, Offset: 0x080
+ * Table 60: PCI_0 Memory 2 Low Decode Address, Offset: 0x258
+ * Table 62: PCI_0 Memory 3 Low Decode Address, Offset: 0x280
+ * Table 64: PCI_1 I/O Low Decode Address,      Offset: 0x090
+ * Table 66: PCI_1 Memory 0 Low Decode Address, Offset: 0x0a0
+ * Table 68: PCI_1 Memory 1 Low Decode Address, Offset: 0x0b0
+ * Table 70: PCI_1 Memory 2 Low Decode Address, Offset: 0x2a0
+ * Table 72: PCI_1 Memory 3 Low Decode Address, Offset: 0x2b0
+ *
+ * 11:00 LowAddr		PCI IO/Memory Space Base Address
+ * 23:12 Reserved
+ * 26:24 PCISwap		PCI Master Data Swap Control (0: Byte Swap;
+ *				1: No swapping; 2: Both byte and word swap;
+ *				3: Word swap; 4..7: Reserved)
+ * 27:27 PCIReq64		PCI master REQ64* policy (Relevant only when
+ *				configured to 64-bit PCI bus and not I/O)
+ *				0: Assert s REQ64* only when transaction
+ *				   is longer than 64-bits.
+ *				1: Always assert REQ64*.
+ * 31:28 Reserved
+ */
+#define	GT_PCISwap_GET(v)		GT__EXT((v), 24, 3)
+#define	GT_PCISwap_ByteSwap		0
+#define	GT_PCISwap_NoSwap		1
+#define	GT_PCISwap_ByteWordSwap		2
+#define	GT_PCISwap_WordSwap		3
+#define	GT_PCI_LowDecode_PCIReq64	GT__BIT(27)
+
+/*
+ * Table 55: PCI_0 I/O High Decode Address,      Offset: 0x050
+ * Table 57: PCI_0 Memory 0 High Decode Address, Offset: 0x060
+ * Table 59: PCI_0 Memory 1 High Decode Address, Offset: 0x088
+ * Table 61: PCI_0 Memory 2 High Decode Address, Offset: 0x260
+ * Table 63: PCI_0 Memory 3 High Decode Address, Offset: 0x288
+ * Table 65: PCI_1 I/O High Decode Address,      Offset: 0x098
+ * Table 67: PCI_1 Memory 0 High Decode Address, Offset: 0x0a8
+ * Table 69: PCI_1 Memory 1 High Decode Address, Offset: 0x0b8
+ * Table 71: PCI_1 Memory 2 High Decode Address, Offset: 0x2a8
+ * Table 73: PCI_1 Memory 3 High Decode Address, Offset: 0x2b8
+ *
+ * 11:00 HighAddr		PCI_0 I/O Space Top Address
+ * 31:12 Reserved
+ */
+
+/*
+ * Table 74: Internal Space Decode, Offset: 0x068
+ * 15:00 IntDecode		GT64260 Internal Space Base Address
+ * 23:16 Reserved
+ * 26:24 PCISwap		Same as PCI_0 Memory 0 Low Decode Address.
+ *				NOTE: Reserved for Galileo Technology usage.
+ *				Relevant only for PCI master configuration
+ *				transactions on the PCI bus.
+ * 31:27 Reserved
+ */
+
+/*
+ * Table 79: PCI_0 I/O Address Remap,          Offset: 0x0f0
+ * Table 80: PCI_0 Memory 0 Address Remap Low, Offset: 0x0f8
+ * Table 82: PCI_0 Memory 1 Address Remap Low, Offset: 0x100
+ * Table 84: PCI_0 Memory 2 Address Remap Low, Offset: 0x2f8
+ * Table 86: PCI_0 Memory 3 Address Remap Low, Offset: 0x300
+ * Table 88: PCI_1 I/O Address Remap,          Offset: 0x108
+ * Table 89: PCI_1 Memory 0 Address Remap Low, Offset: 0x110
+ * Table 91: PCI_1 Memory 1 Address Remap Low, Offset: 0x118
+ * Table 93: PCI_1 Memory 2 Address Remap Low, Offset: 0x310
+ * Table 95: PCI_1 Memory 3 Address Remap Low, Offset: 0x318
+ *
+ * 11:00 Remap			PCI IO/Memory Space Address Remap (31:20)
+ * 31:12 Reserved
+ */
+
+/*
+ * Table 81: PCI_0 Memory 0 Address Remap High, Offset: 0x320
+ * Table 83: PCI_0 Memory 1 Address Remap High, Offset: 0x328
+ * Table 85: PCI_0 Memory 2 Address Remap High, Offset: 0x330
+ * Table 87: PCI_0 Memory 3 Address Remap High, Offset: 0x338
+ * Table 90: PCI_1 Memory 0 Address Remap High, Offset: 0x340
+ * Table 92: PCI_1 Memory 1 Address Remap High, Offset: 0x348
+ * Table 94: PCI_1 Memory 2 Address Remap High, Offset: 0x350
+ * Table 96: PCI_1 Memory 3 Address Remap High, Offset: 0x358
+ *
+ * 31:00 Remap			PCI Memory Address Remap (high 32 bits)
+ */
+
+/*
+ * Table 97: CPU Configuration, Offset: 0x000
+ * 07:00 NoMatchCnt		CPU Address Miss Counter
+ * 08:08 NoMatchCntEn		CPU Address Miss Counter Enable
+ *				NOTE: Relevant only if multi-GT is enabled.
+ *				(0: Disabled; 1: Enabled)
+ * 09:09 NoMatchCntExt		CPU address miss counter MSB
+ * 10:10 Reserved
+ * 11:11 AACKDelay		Address Acknowledge Delay
+ *				0: AACK* is asserted one cycle after TS*.
+ *				1: AACK* is asserted two cycles after TS*.
+ * 12:12 Endianess		Must be 0
+ *				NOTE: The GT64260 does not support the PowerPC
+ *				      Little Endian convention
+ * 13:13 Pipeline		Pipeline Enable
+ *				0: Disabled. The GT64260 will not respond with
+ *				   AACK* to a new CPU transaction, before the
+ *				   previous transaction data phase completes.
+ *				1: Enabled.
+ * 14:14 Reserved
+ * 15:15 TADelay		Transfer Acknowledge Delay
+ *				0: TA* is asserted one cycle after AACK*
+ *				1: TA* is asserted two cycles after AACK*
+ * 16:16 RdOOO			Read Out of Order Completion
+ *				0: Not Supported, Data is always returned in
+ *				   order (DTI[0-2] is always driven
+ *				1: Supported
+ * 17:17 StopRetry		Relevant only if PCI Retry is enabled
+ *				0: Keep Retry all PCI transactions targeted
+ *				   to the GT64260.
+ *				1: Stop Retry of PCI transactions.
+ * 18:18 MultiGTDec		Multi-GT Address Decode
+ *				0: Normal address decoding
+ *				1: Multi-GT address decoding
+ * 19:19 DPValid		CPU DP[0-7] Connection.  CPU write parity ...
+ *				0: is not checked. (Not connected)
+ *				1: is checked (Connected)
+ * 21:20 Reserved
+ * 22:22 PErrProp		Parity Error Propagation
+ *				0: GT64260 always drives good parity on
+ *				   DP[0-7] during CPU reads.
+ *				1: GT64260 drives bad parity on DP[0-7] in case
+ *				   the read response from the target interface
+ *				   comes with erroneous data indication
+ *				   (e.g. ECC error from SDRAM interface).
+ * 25:23 Reserved
+ * 26:26 APValid		CPU AP[0-3] Connection.  CPU address parity ...
+ *				0: is not checked. (Not connected)
+ *				1: is checked (Connected)
+ * 27:27 RemapWrDis		Address Remap Registers Write Control
+ *				0: Write to Low Address decode register.
+ *				   Results in writing of the corresponding
+ *				   Remap register.
+ *				1: Write to Low Address decode register.  No
+ *				   affect on the corresponding Remap register.
+ * 28:28 ConfSBDis		Configuration Read Sync Barrier Disable
+ *				0: enabled; 1: disabled
+ * 29:29 IOSBDis		I/O Read Sync Barrier Disable
+ *				0: enabled; 1: disabled
+ * 30:30 ClkSync		Clocks Synchronization
+ *				0: The CPU interface is running with SysClk,
+ *				   which is asynchronous to TClk.
+ *				1: The CPU interface is running with TClk.
+ * 31:31 Reserved
+ */
+#define	GT_CPUCfg_NoMatchCnt_GET(v)	GT__EXT((v), 0, 8)
+#define	GT_CPUCfg_NoMatchCntEn		GT__BIT( 9)
+#define	GT_CPUCfg_NoMatchCntExt		GT__BIT(10)
+#define	GT_CPUCfg_AACKDelay		GT__BIT(11)
+#define	GT_CPUCfg_Endianess		GT__BIT(12)
+#define	GT_CPUCfg_Pipeline		GT__BIT(13)
+#define	GT_CPUCfg_TADelay		GT__BIT(15)
+#define	GT_CPUCfg_RdOOO			GT__BIT(16)
+#define	GT_CPUCfg_StopRetry		GT__BIT(17)
+#define	GT_CPUCfg_MultiGTDec		GT__BIT(18)
+#define	GT_CPUCfg_DPValid		GT__BIT(19)
+#define	GT_CPUCfg_PErrProp		GT__BIT(22)
+#define	GT_CPUCfg_APValid		GT__BIT(26)
+#define	GT_CPUCfg_RemapWrDis		GT__BIT(27)
+#define	GT_CPUCfg_ConfSBDis		GT__BIT(28)
+#define	GT_CPUCfg_IOSBDis		GT__BIT(29)
+#define	GT_CPUCfg_ClkSync		GT__BIT(30)
+
+/*
+ * Table 98: CPU Mode, Offset: 0x120, Read only
+ * 01:00 MultiGTID		Multi-GT ID
+ *				Represents the ID to which the GT64260 responds
+ *				to during a multi-GT address decoding period.
+ * 02:02 MultiGT		(0: Single; 1: Multiple) GT configuration
+ * 03:03 RetryEn		(0: Don't; 1: Do) Retry PCI transactions
+ * 07:04 CPUType
+ *				0x0-0x3: Reserved
+ *				0x4:     64-bit PowerPC CPU, 60x bus
+ *				0x5:     64-bit PowerPC CPU, MPX bus
+ *				0x6-0xf: Reserved
+ * 31:08 Reserved
+ */
+#define	GT_CPUMode_MultiGTID_GET(v)	GT__EXT(v, 0, 2)
+#define GT_CPUMode_MultiGT		GT__BIT(2)
+#define GT_CPUMode_RetryEn		GT__BIT(3)
+#define	GT_CPUMode_CPUType_GET(v)	GT__EXT(v, 4, 4)
+
+/*
+ * Table 99: CPU Master Control, Offset: 0x160
+ * 07:00 Reserved
+ * 08:08 IntArb			CPU Bus Internal Arbiter Enable
+ *				NOTE: Only relevant to 60x bus mode. When
+ *				      running MPX bus, the GT64260 internal
+ *				      arbiter must be used.
+ *				0: Disabled.  External arbiter is required.
+ *				1: Enabled.  Use the GT64260 CPU bus arbiter.
+ * 09:09 IntBusCtl		CPU Interface Unit Internal Bus Control
+ *				NOTE: This bit must be set to 1. It is reserved
+ *				      for Galileo Technology usage.
+ *				0: Enable internal bus sharing between master
+ *				   and slave interfaces.
+ *				1: Disable internal bus sharing between master
+ *				   and slave interfaces.
+ * 10:10 MWrTrig		Master Write Transaction Trigger
+ *				0: With first valid write data
+ *				1: With last valid write data
+ * 11:11 MRdTrig		Master Read Response Trigger
+ *				0: With first valid read data
+ *				1: With last valid read data
+ * 12:12 CleanBlock		Clean Block Snoop Transaction Support
+ *				0: CPU does not support clean block (603e,750)
+ *				1: CPU supports clean block (604e,G4)
+ * 13:13 FlushBlock		Flush Block Snoop Transaction Support
+ *				0: CPU does not support flush block (603e,750)
+ *				1: CPU supports flush block (604e,G4)
+ * 31:14 Reserved
+ */
+#define GT_CPUMstrCtl_IntArb			GT__BIT(8)
+#define GT_CPUMstrCtl_IntBusCtl			GT__BIT(9)
+#define GT_CPUMstrCtl_MWrTrig			GT__BIT(10)
+#define GT_CPUMstrCtl_MRdTrig			GT__BIT(11)
+#define GT_CPUMstrCtl_CleanBlock		GT__BIT(12)
+#define GT_CPUMstrCtl_FlushBlock		GT__BIT(13)
+
+#define	GT_ArbSlice_SDRAM	0x0	/* SDRAM interface snoop request */
+#define GT_ArbSlice_DEVICE	0x1	/* Device request */
+#define GT_ArbSlice_NULL	0x2	/* NULL request */
+#define GT_ArbSlice_PCI0	0x3	/* PCI_0 access */
+#define GT_ArbSlice_PCI1	0x4	/* PCI_1 access */
+#define GT_ArbSlice_COMM	0x5	/* Comm unit access */
+#define GT_ArbSlice_IDMA0123	0x6	/* IDMA channels 0/1/2/3 access */
+#define GT_ArbSlice_IDMA4567	0x7	/* IDMA channels 4/5/6/7 access */
+					/* 0x8-0xf: Reserved */
+
+/* Pass in the slice number (from 0..16) as 'n'
+ */
+#define	GT_XbarCtl_GET_ArbSlice(v, n)		GT__EXT((v), (((n) & 7)*4, 4)
+
+/*
+ * Table 100: CPU Interface Crossbar Control Low, Offset: 0x150
+ * 03:00 Arb0			Slice  0 of CPU Master pizza Arbiter
+ * 07:04 Arb1			Slice  1 of CPU Master pizza Arbiter
+ * 11:08 Arb2			Slice  2 of CPU Master pizza Arbiter
+ * 15:12 Arb3			Slice  3 of CPU Master pizza Arbiter
+ * 19:16 Arb4			Slice  4 of CPU Master pizza Arbiter
+ * 23:20 Arb5			Slice  5 of CPU Master pizza Arbiter
+ * 27:24 Arb6			Slice  6 of CPU Master pizza Arbiter
+ * 31:28 Arb7			Slice  7 of CPU Master pizza Arbiter
+ */
+
+/*
+ * Table 101: CPU Interface Crossbar Control High, Offset: 0x158
+ * 03:00 Arb8			Slice  8 of CPU Master pizza Arbiter
+ * 07:04 Arb9			Slice  9 of CPU Master pizza Arbiter
+ * 11:08 Arb10			Slice 10 of CPU Master pizza Arbiter
+ * 15:12 Arb11			Slice 11 of CPU Master pizza Arbiter
+ * 19:16 Arb12			Slice 12 of CPU Master pizza Arbiter
+ * 23:20 Arb13			Slice 13 of CPU Master pizza Arbiter
+ * 27:24 Arb14			Slice 14 of CPU Master pizza Arbiter
+ * 31:28 Arb15			Slice 15 of CPU Master pizza Arbiter
+ */
+
+/*
+ * Table 102: CPU Interface Crossbar Timeout, Offset: 0x168
+ * NOTE: Reserved for Galileo Technology usage.
+ * 07:00 Timeout		Crossbar Arbiter Timeout Preset Value
+ * 15:08 Reserved
+ * 16:16 TimeoutEn		Crossbar Arbiter Timer Enable
+ *				(0: Enable; 1: Disable)
+ * 31:17 Reserved
+ */
+
+/*
+ * Table 103: CPU Read Response Crossbar Control Low, Offset: 0x170
+ * 03:00 Arb0			Slice  0 of CPU Slave pizza Arbiter
+ * 07:04 Arb1			Slice  1 of CPU Slave pizza Arbiter
+ * 11:08 Arb2			Slice  2 of CPU Slave pizza Arbiter
+ * 15:12 Arb3			Slice  3 of CPU Slave pizza Arbiter
+ * 19:16 Arb4			Slice  4 of CPU Slave pizza Arbiter
+ * 23:20 Arb5			Slice  5 of CPU Slave pizza Arbiter
+ * 27:24 Arb6			Slice  6 of CPU Slave pizza Arbiter
+ * 31:28 Arb7			Slice  7 of CPU Slave pizza Arbiter
+ */
+/*
+ * Table 104: CPU Read Response Crossbar Control High, Offset: 0x178
+ * 03:00 Arb8			Slice  8 of CPU Slave pizza Arbiter
+ * 07:04 Arb9			Slice  9 of CPU Slave pizza Arbiter
+ * 11:08 Arb10			Slice 10 of CPU Slave pizza Arbiter
+ * 15:12 Arb11			Slice 11 of CPU Slave pizza Arbiter
+ * 19:16 Arb12			Slice 12 of CPU Slave pizza Arbiter
+ * 23:20 Arb13			Slice 13 of CPU Slave pizza Arbiter
+ * 27:24 Arb14			Slice 14 of CPU Slave pizza Arbiter
+ * 31:28 Arb15			Slice 15 of CPU Slave pizza Arbiter
+ */ 
+
+/*
+ * Table 105: PCI_0 Sync Barrier Virtual Register, Offset: 0x0c0
+ * Table 106: PCI_1 Sync Barrier Virtual Register, Offset: 0x0c8
+ *   NOTE: The read data is random and should be ignored.
+ * 31:00 SyncBarrier		A CPU read from this register creates a
+ *				synchronization barrier cycle.
+ */
+
+/*
+ * Table 107: CPU Protect Address 0 Low, Offset: 0x180
+ * Table 109: CPU Protect Address 1 Low, Offset: 0x190
+ * Table 111: CPU Protect Address 2 Low, Offset: 0x1a0
+ * Table 113: CPU Protect Address 3 Low, Offset: 0x1b0
+ * Table 115: CPU Protect Address 4 Low, Offset: 0x1c0
+ * Table 117: CPU Protect Address 5 Low, Offset: 0x1d0
+ * Table 119: CPU Protect Address 6 Low, Offset: 0x1e0
+ * Table 121: CPU Protect Address 7 Low, Offset: 0x1f0
+ *
+ * 11:00 LowAddr		CPU Protect Region Base Address
+ *				Corresponds to address bits[31:20].
+ * 15:12 Reserved.		Must be 0
+ * 16:16 AccProtect		CPU Access Protect
+ *				Access is (0: allowed; 1: forbidden)
+ * 17:17 WrProtect		CPU Write Protect
+ *				Writes are (0: allowed; 1: forbidden)
+ * 18:18 CacheProtect		CPU caching protect. 	Caching (block read)
+ *				is (0: allowed; 1: forbidden)
+ * 31:19 Reserved
+ */
+#define GT_CPU_AccProtect			GT__BIT(16)
+#define GT_CPU_WrProtect			GT__BIT(17)
+#define GT_CPU_CacheProtect			GT__BIT(18)
+
+/* 
+ * Table 108: CPU Protect Address 0 High, Offset: 0x188
+ * Table 110: CPU Protect Address 1 High, Offset: 0x198
+ * Table 112: CPU Protect Address 2 High, Offset: 0x1a8
+ * Table 114: CPU Protect Address 3 High, Offset: 0x1b8
+ * Table 116: CPU Protect Address 4 High, Offset: 0x1c8
+ * Table 118: CPU Protect Address 5 High, Offset: 0x1d8
+ * Table 120: CPU Protect Address 6 High, Offset: 0x1e8
+ * Table 122: CPU Protect Address 7 High, Offset: 0x1f8
+ *
+ * 11:00 HighAddr		CPU Protect Region Top Address
+ *				Corresponds to address bits[31:20]
+ * 31:12 Reserved
+ */
+
+/*
+ * Table 123: Snoop Base Address 0, Offset: 0x380
+ * Table 125: Snoop Base Address 1, Offset: 0x390
+ * Table 127: Snoop Base Address 2, Offset: 0x3a0
+ * Table 129: Snoop Base Address 3, Offset: 0x3b0
+ *
+ * 11:00 LowAddr		Snoop Region Base Address [31:20]
+ * 15:12 Reserved		Must be 0.
+ * 17:16 Snoop			Snoop Type
+ *				0x0: No Snoop
+ *				0x1: Snoop to WT region
+ *				0x2: Snoop to WB region
+ *				0x3: Reserved
+ * 31:18 Reserved
+ */
+#define GT_Snoop_GET(v)				GT__EXT((v), 16, 2)
+#define GT_Snoop_INS(v)				GT__INS((v), 16)
+#define	GT_Snoop_None				0
+#define	GT_Snoop_WT				1
+#define	GT_Snoop_WB				2
+
+
+/*
+ * Table 124: Snoop Top Address 0, Offset: 0x388
+ * Table 126: Snoop Top Address 1, Offset: 0x398
+ * Table 128: Snoop Top Address 2, Offset: 0x3a8
+ * Table 130: Snoop Top Address 3, Offset: 0x3b8
+ * 11:00 HighAddr		Snoop Region Top Address [31:20]
+ * 31:12 Reserved
+ */
+
+
+/*
+ * Table 131: CPU Error Address Low, Offset: 0x070, Read Only.
+ *   In case of multiple errors, only the first one is latched.  New error
+ *   report latching is enabled only after the CPU Error Address Low register
+ *   is being read.
+ * 31:00 ErrAddr		Latched address bits [31:0] of a CPU
+ *				transaction in case of:
+ *				o illegal address (failed address decoding)
+ *				o access protection violation
+ *				o bad data parity
+ *				o bad address parity
+ *				Upon address latch, no new address are
+ *				registered (due to additional error condition),
+ *				until the register is being read.
+ */
+
+/*
+ * Table 132: CPU Error Address High, Offset: 0x078, Read Only.
+ *   Once data is latched, no new data can be registered (due to additional
+ *   error condition), until CPU Error Low Address is being read (which
+ *   implies, it should be the last being read by the interrupt handler).
+ * 03:00 Reserved
+ * 07:04 ErrPar			Latched address parity bits in case
+ *				of bad CPU address parity detection.
+ * 31:08 Reserved
+ */
+#define	GT_CPUErrorAddrHigh_ErrPar_GET(v)	GT__EXT((v), 4, 4)
+
+/*
+ * Table 133: CPU Error Data Low, Offset: 0x128, Read only.
+ * 31:00 PErrData		Latched data bits [31:0] in case of bad data
+ *				parity sampled on write transactions or on
+ *				master read transactions.
+ */
+
+/*
+ * Table 134: CPU Error Data High, Offset: 0x130, Read only.
+ * 31:00 PErrData		Latched data bits [63:32] in case of bad data
+ *				parity sampled on write transactions or on
+ *				master read transactions.
+ */
+
+/*
+ * Table 135: CPU Error Parity, Offset: 0x138, Read only.
+ * 07:00 PErrPar		Latched data parity bus in case of bad data
+ *				parity sampled on write transactions or on
+ *				master read transactions.
+ * 31:10 Reserved
+ */
+#define	GT_CPUErrorParity_PErrPar_GET(v)	GT__EXT((v), 0, 8)
+
+/*
+ * Table 136: CPU Error Cause, Offset: 0x140
+ *   Bits[7:0] are clear only. A cause bit is set upon an error condition
+ *   occurrence. Write a 0 value to clear the bit.  Writing a 1 value has
+ *   no affect.
+ * 00:00 AddrOut		CPU Address Out of Range
+ * 01:01 AddrPErr		Bad Address Parity Detected
+ * 02:02 TTErr			Transfer Type Violation.
+ *				The CPU attempts to burst (read or write) to an
+ *				internal register.
+ * 03:03 AccErr			Access to a Protected Region
+ * 04:04 WrErr			Write to a Write Protected Region
+ * 05:05 CacheErr		Read from a Caching protected region
+ * 06:06 WrDataPErr		Bad Write Data Parity Detected
+ * 07:07 RdDataPErr		Bad Read Data Parity Detected
+ * 26:08 Reserved
+ * 31:27 Sel			Specifies the error event currently being
+ *				reported in Error Address, Error Data, and
+ *				Error Parity registers.
+ *				0x0: AddrOut
+ *				0x1: AddrPErr
+ *				0x2: TTErr
+ *				0x3: AccErr
+ *				0x4: WrErr
+ *				0x5: CacheErr
+ *				0x6: WrDataPErr
+ *				0x7: RdDataPErr
+ *				0x8-0x1f: Reserved
+ */
+#define GT_CPUError_AddrOut		GT__BIT(GT_CPUError_Sel_AddrOut)
+#define GT_CPUError_AddrPErr		GT__BIT(GT_CPUError_Sel_AddrPErr)
+#define GT_CPUError_TTErr		GT__BIT(GT_CPUError_Sel_TTErr)
+#define GT_CPUError_AccErr		GT__BIT(GT_CPUError_Sel_AccErr)
+#define GT_CPUError_WrErr		GT__BIT(GT_CPUError_Sel_WrPErr)
+#define GT_CPUError_CacheErr		GT__BIT(GT_CPUError_Sel_CachePErr)
+#define GT_CPUError_WrDataPErr		GT__BIT(GT_CPUError_Sel_WrDataPErr)
+#define GT_CPUError_RdDataPErr		GT__BIT(GT_CPUError_Sel_RdDataPErr)
+
+#define GT_CPUError_Sel_AddrOut		0
+#define GT_CPUError_Sel_AddrPErr	1
+#define GT_CPUError_Sel_TTErr		2
+#define GT_CPUError_Sel_AccErr		3
+#define GT_CPUError_Sel_WrErr		4
+#define GT_CPUError_Sel_CacheErr	5
+#define GT_CPUError_Sel_WrDataPErr	6
+#define GT_CPUError_Sel_RdDataPErr	7
+
+#define	GT_CPUError_Sel_GET(v)		GT__EXT((v), 27, 5)
+
+/*
+ * Table 137: CPU Error Mask, Offset: 0x148
+ * 00:00 AddrOut		If set to 1, enables AddrOut interrupt.
+ * 01:01 AddrPErr		If set to 1, enables AddrPErr interrupt.
+ * 02:02 TTErr			If set to 1, enables TTErr interrupt.
+ * 03:03 AccErr			If set to 1, enables AccErr interrupt.
+ * 04:04 WrErr			If set to 1, enables WrErr interrupt.
+ * 05:05 CacheErr		If set to 1, enables CacheErr interrupt.
+ * 06:06 WrDataPErr		If set to 1, enables WrDataPErr interrupt.
+ * 07:07 RdDataPErr		If set to 1, enables RdDataPErr interrupt.
+ * 31:08 Reserved
+ */
+
+/* Comm Unit Arbiter Control */
+#define GT_CommUnitArb_Ctrl     0xf300    /*<skf>*/
+/*
+ * Comm Unit Interrupt registers
+ */
+#define GT_CommUnitIntr_Cause	0xf310
+#define GT_CommUnitIntr_Mask	0xf314
+#define GT_CommUnitIntr_ErrAddr	0xf318
+
+#define GT_CommUnitIntr_E0	0x00000007
+#define GT_CommUnitIntr_E1	0x00000070
+#define GT_CommUnitIntr_E2	0x00000700
+#define GT_CommUnitIntr_S0	0x00070000
+#define GT_CommUnitIntr_S1	0x00700000
+#define GT_CommUnitIntr_Sel	0x70000000
+
+/*
+ * SDRAM Error Report (ECC) Registers
+ */
+#define GT_ECC_Data_Lo		0x484	/* latched Error Data (low) */
+#define GT_ECC_Data_Hi		0x480	/* latched Error Data (high) */
+#define GT_ECC_Addr		0x490	/* latched Error Address */
+#define GT_ECC_Rec		0x488	/* latched ECC code from SDRAM */
+#define GT_ECC_Calc		0x48c	/* latched ECC code from SDRAM */
+#define GT_ECC_Ctl		0x494	/* ECC Control */
+#define GT_ECC_Count		0x498	/* ECC 1-bit error count */
+
+/*
+ * Watchdog Registers
+ */
+#define GT_WDOG_Config		0xb410
+#define GT_WDOG_Value		0xb414
+#define GT_WDOG_Value_NMI	GT__MASK(24)
+#define GT_WDOG_Config_Preset	GT__MASK(24)
+#define GT_WDOG_Config_Ctl1a	GT__BIT(24)
+#define GT_WDOG_Config_Ctl1b	GT__BIT(25)
+#define GT_WDOG_Config_Ctl2a	GT__BIT(26)
+#define GT_WDOG_Config_Ctl2b	GT__BIT(27)
+#define GT_WDOG_Config_Enb	GT__BIT(31)
+
+#define GT_WDOG_NMI_DFLT	(GT__MASK(24) & GT_WDOG_Value_NMI)
+#define GT_WDOG_Preset_DFLT	(GT__MASK(22) & GT_WDOG_Config_Preset)
+
+/*
+ * Device Bus Interrupts
+ */
+#define GT_DEVBUS_ICAUSE	0x4d0	/* Device Interrupt Cause */
+#define GT_DEVBUS_IMASK		0x4d4	/* Device Interrupt Mask */
+#define GT_DEVBUS_ERR_ADDR	0x4d8	/* Device Error Address */
+
+/*
+ * bit defines for GT_DEVBUS_ICAUSE, GT_DEVBUS_IMASK
+ */
+#define GT_DEVBUS_DBurstErr	GT__BIT(0)
+#define GT_DEVBUS_DRdyErr	GT__BIT(1)
+#define GT_DEVBUS_Sel		GT__BIT(27)
+#define GT_DEVBUS_RES	~(GT_DEVBUS_DBurstErr|GT_DEVBUS_DRdyErr|GT_DEVBUS_Sel)
+
+/* TWSI Interface - TWSI Interface Registers <skf> */
+#define TWSI_SLV_ADDR		0xc000
+#define TWSI_EXT_SLV_ADDR	0xc010
+#define TWSI_DATA		0xc004
+#define TWSI_CTRL		0xc008
+#define TWSI_STATUS		0xc00c
+#define TWSI_BAUDE_RATE		0xc00c
+#define TWSI_SFT_RST		0xc01c
+
+/* Interrupt Controller - Interrupt Controller Registers */
+/* Section 25.2 : Table 734 <skf> */
+
+#define GT_MAIN_INT_CAUSE_LO	0xc18 /* read Only */
+#define GT_MAIN_INT_CAUSE_HI   0xc68 /* read Only */
+#define GT_CPU_INT_MASK_LO 	0xc1c
+#define GT_CPU_INT_MASK_HI	0xc6c
+#define GT_CPU_SEL_CAUSE	0xc70 /* read Only */
+#define GT_PCI0_INT_MASK_LO	0xc24
+#define GT_PCI0_INT_MASK_HI	0xc64
+#define GT_PCI0_SEL_CAUSE	0xc74 /* read Only */
+#define GT_PCI1_INT_MASK_LO	0xca4
+#define GT_PCI1_INT_MASK_HI	0xce4
+#define GT_PCI1_SEL_CAUSE	0xcf4 /* read Only */
+#define GT_CPU_INT0_MASK	0xe60
+#define GT_CPU_INT1_MASK	0xe64
+#define GT_CPU_INT2_MASK	0xe68
+#define GT_CPU_INT3_MASK	0xe6c
+
+#endif /* !_DISCOVERY_DEV_GTREG_H */
Index: c/src/lib/libbsp/powerpc/mvme5500/LICENSE
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/LICENSE	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/LICENSE	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,112 @@
+
+     EPICS Open License Terms
+
+       The following is derived from the EPICS Open software license
+       agreement which applies to many of the unbundled EPICS extensions
+       and support modules.
+
+       --------------------------------------------------------------
+
+       Copyright © 2004, Brookhaven National Laboratory and
+			 Shuchen K. Feng <feng1@bnl.gov>
+
+       The "RTEMS-MVME5500 Board Support Package" is distributed
+       subject to the following license conditions:
+
+         SOFTWARE LICENSE AGREEMENT
+         Software: RTEMS-MVME5500 Board Support Package (BSP)
+
+          1. The "Software", below, refers to the aforementioned Board Support
+             package (in either source code, or binary form and accompanying
+             documentation)
+
+             Each licensee is addressed as "you" or "Licensee."
+
+          1a.Part of the software was derived from the "RTEMS-PowerPC
+             BSPs", "NetBSD Project by Allegro Networks, Inc., and
+             Wasabi Systems, In.". The original Copyrights pertaining to
+             these items are contained in the individual source files, 
+             and they are covered by their own License.
+          2. The copyright holders shown above and their third-party
+             licensors hereby grant Licensee a royalty-free nonexclusive
+             license, subject to the limitations stated herein and U.S.
+             Government license rights.
+          3. You may modify and make a copy or copies of the Software for use
+             within your organization, if you meet the following conditions:
+                a. Copies in source code must include the copyright notice
+                   and this Software License Agreement.
+                b. Copies in binary form must include the copyright notice
+                   and this Software License Agreement in the documentation
+                   and/or other materials provided with the copy.
+
+          4. You may modify a copy or copies of the Software or any portion
+             of it, thus forming a work based on the Software, and distribute
+             copies of such work outside your organization, if you meet all
+             of the following conditions:
+                a. Copies in source code must include the copyright notice
+                   and this Software License Agreement;
+                b. Copies in binary form must include the copyright notice
+                   and this Software License Agreement in the documentation
+                   and/or other materials provided with the copy;
+                c. Modified copies and works based on the Software must carry
+                   prominent notices stating that you changed specified
+                   portions of the Software.
+
+          5. Portions of the Software resulted from work developed under a
+             U.S. Government contract and are subject to the following
+             license:  the Government is granted for itself and others acting
+             on its behalf a paid-up, nonexclusive, irrevocable worldwide
+             license in this computer software to reproduce, prepare
+             derivative works, and perform publicly and display publicly.
+          6. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT
+             WARRANTY OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY
+             LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT OF
+             ENERGY, AND THEIR EMPLOYEES: (1) DISCLAIM ANY WARRANTIES,
+             EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
+             WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
+             TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME ANY LEGAL LIABILITY
+             OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS, OR USEFULNESS
+             OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE SOFTWARE
+             WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT
+             THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS
+             ERROR-FREE OR THAT ANY ERRORS WILL BE CORRECTED.
+          7. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS,
+             THEIR THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED
+             STATES DEPARTMENT OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR
+             ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE
+             DAMAGES OF ANY KIND OR NATURE, INCLUDING BUT NOT LIMITED TO LOSS
+             OF PROFITS OR LOSS OF DATA, FOR ANY REASON WHATSOEVER, WHETHER
+             SUCH LIABILITY IS ASSERTED ON THE BASIS OF CONTRACT, TORT
+             (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR OTHERWISE, EVEN
+             IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE POSSIBILITY OF
+             SUCH LOSS OR DAMAGES.
+
+	Brookhaven National Laboratory Notice
+	*************************************
+
+	Acknowledgment of sponsorship
+	- - - - - - - - - - - - - - - -
+	This software was produced by the National Synchrotron Light Source,
+        Brookhaven National Laboratory, under Contract DE-AC02-98CH10886 with
+        the Department of Energy.
+
+	Government disclaimer of liability
+	- - - - - - - - - - - - - - - - -
+	Neither the United States nor the United States Department of Energy,
+	nor any of their employees, makes any warranty, express or implied,
+	or assumes any legal liability or responsibility for the accuracy,
+	completeness, or usefulness of any data, apparatus, product, or process
+	disclosed, or represents that its use would not infringe privately
+	owned rights.
+
+        Brookhaven disclaimer of liability
+        - - - - - - - - - - - - - - - - -
+        Brookhaven National Laboratory makes no representations or warranties,
+        express or implied, nor assumes any liability for the use of this software.
+
+	Maintenance of notice
+	- - - - - - - - - - -
+	In the interest of clarity regarding the origin and status of this
+	software, Brookhaven National Laboratory requests that any recipient of 
+        it maintain this notice affixed to any distribution by the recipient that
+        contains a copy or derivative of this software.
Index: c/src/lib/libbsp/powerpc/mvme5500/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,17 @@
+##
+## Makefile.am,v 1.8.4.1 2003/02/20 21:55:34 joel Exp
+##
+
+ACLOCAL_AMFLAGS = -I ../../../../../../aclocal
+
+# wrapup is the one that actually builds and installs the library
+#  from the individual .rel files built in other directories
+SUBDIRS = include clock console pci irq tod vectors start \
+    startup GT64260 network @exceptions@ vme wrapup
+
+include $(top_srcdir)/../../bsp.am
+
+EXTRA_DIST = README bsp_specs ChangeLog.1
+
+include $(top_srcdir)/../../../../../../automake/subdirs.am
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/README
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/README	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/README	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,105 @@
+#
+#  $Id: README,v 1.1  Shuchen Kate Feng, NSLS, BNL (10/10/04)
+#
+
+BSP NAME:           mvme5500
+BOARD:              MVME5500 by Motorola
+BUS:                PCI
+CPU FAMILY:         ppc
+CPU:                MPC7455 @ 1GHZ
+COPROCESSORS:       N/A
+MODE:               32/64 bit mode (support 32 bit for now)
+DEBUG MONITOR:      MOTLoad
+SYSTEM CONTROLLER:  GT64260B
+
+OTHER README FILES: README.booting,README.rtems-4.6.0-patch,README.VME,
+		    README.irq
+
+PERIPHERALS
+===========
+TIMERS:             Eight, 32 bit programmable
+SERIAL PORTS:       2 NS 16550 on GT64260B
+REAL-TIME CLOCK:    MK48T37V
+32K NVSRAM:         MK48T37V
+WATCHDOG TIMER:     use the one in GT-64260B
+DMA:                8 channel DMA controller (GT-64260B)
+VIDEO:              none
+NETWORKING:         Port 1: Intel 82544EI Gigabit Ethernet Controller
+		    10/100/1000Mb/s routed to front panel RJ-45
+	            Port 2: 10/100 Mb ethernet unit integrated on the
+                    Marvell's GT64260 system controller 
+
+DRIVER INFORMATION
+==================
+CLOCK DRIVER:       PPC internal
+IOSUPP DRIVER:      N/A
+SHMSUPP:            N/A
+TIMER DRIVER:       PPC internal
+TTY DRIVER:         PPC internal
+
+STDIO
+=====
+PORT:               Console port 0
+ELECTRICAL:         na
+BAUD:               na
+BITS PER CHARACTER: na
+PARITY:             na
+STOP BITS:          na
+
+
+Jumpers
+=======
+
+1) The BSP is tested with the 60x bus mode instead of the MPX bus mode.
+   ( No jumper or a jumper across pins 1-2 on J19 selects the 60x bus mode)
+
+2) On the mvme5500 board, Ethernet 1 is the Gigabit Ethernet port and is
+   front panel only. Ethernet 2 is 10/100 BaseT Ethernet. For front-panel
+   Ethernet2, install jumpers across pins 1-2 on all J6, J7, J100 and
+   J101 headers.
+
+3) Enable SROM initialization at startup. (No jumper or a jumper across
+   pins 1-2 on J17)
+
+In fact, (if I did not miss anything) the mvme5500 board should function
+properly if one keeps all the jumpers at factory configuration.
+One can leave out the jumper on J30 to disable EEPROM programming.
+
+Notes
+=====
+
+BSP BAT usage
+----------------------
+DBAT0 and IBAT0
+0x00000000
+0x0fffffff  1st 256M, for MEMORY access (caching enabled)
+
+DBAT1 and IBAT1
+0x00000000
+0x0fffffff  2nd 256M, for MEMORY access (caching enabled)
+
+UPDATE: (2004/5).
+The BSP now uses page tables for mapping the entire 512MB
+of RAM. DBAT0 and DBAT1 is hence free for use by the 
+application. A simple 1:1 (virt<->phys) mapping is employed.
+The BSP write-protects the text and read-only data
+areas of the application.  Special acknowledgement to Till
+Straumann <strauman@slac.stanford.edu> for providing inputs in
+porting the memory protection software he wrote (BSP_pgtbl_xxx())
+to MVME5500.
+
+
+The default VME configuration uses DBAT0 to map
+more PCI memory space for use by the universe VME
+bridge:
+
+DBAT0
+0x90000000	PCI memory space <-> VME
+0x9fffffff
+
+Port  VME-Addr   Size       PCI-Adrs   Mode:
+0:    0x20000000 0x0F000000 0x90000000 A32, Dat, Sup
+1:    0x00000000 0x00FF0000 0x9F000000 A24, Dat, Sup
+2:    0x00000000 0x00010000 0x9FFF0000 A16, Dat, Sup
+
+
Index: c/src/lib/libbsp/powerpc/mvme5500/README.VME
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/README.VME	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/README.VME	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,19 @@
+README.VME: written by S. Kate Feng <feng1@bnl.gov> , 7/22/04
+
+
+Some VME modules(e.g. Oms58 motor controller) might require a PCI sync
+command following the out_xx() function (e.g. out_be16()) if mvme5500 is
+used as the SBC.  The mechanism is a hardware hook to help software
+synchronize between the CPU and PCI activities. The PCI sync is
+implemented in pci/pci_interface.c. For more example of the usage,one
+can refrence the drvOMS58.cc file that is posted in synAppRTEMS of 
+http://www.nsls.bnl.gov/organization/UserScience/Detectors/Software/Default.htm.
+
+
+In spite of the PCI sync overhead for the Oms58 motor controller, I do
+not see the runtime performance of RTEMS-mvme5500 being compromised as
+compared with that of RTEMS-mvme2307.  For example, it takes the same
+time to run motor_init() of synAppRTEMS for 48 motor initializations
+running either RTEMS-mvme2307 or RTEMS-mvme5500.
+
+  
Index: c/src/lib/libbsp/powerpc/mvme5500/README.booting
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/README.booting	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/README.booting	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,62 @@
+README.booting: written by S. Kate Feng <feng1@bnl.gov>, 2004/10/11
+
+The bootloader is adapted from Till Straumann's Generic Mini-loader,
+which he wrote originally for the SVGM powerpc board. Part of the
+BSP was derived from the "RTEMS-PowerPC BSPs" and the NetBSD projects.
+As of today, the BSP is built and tested on the RTEMS-4.6.0
+release with small patches I added (see README.rtems-4.6.0-patch
+and rtems-4.6.0-patch/ directory).
+
+
+Booting requirement :
+-------------------------
+
+1) One needs to setup BOOTP/DHCP and TFTP servers and /etc/bootptab
+   properly to boot the system.  (Note : EPICS needs a NTP server).
+ 
+2) Please copy the prebuilt RTEMS binary (e.g. misc/rtems5500-cexp.bin)
+   and perhaps others (e.g. misc/st.sys) to the /tftpboot/epics/hostname/bin/
+   directory or the TFTPBOOT one you specified in the 'tftpGet'
+   command of the boot script (as shown in the following example).
+
+3) Example of the boot script setup carried out on the MOTLoad 
+   command line : 
+
+MVME5500> gevEdit mot-script-boot
+(Blank line terminates input.)
+tftpGet -a4000000 -cxx.xx.xx.xx -sxx.xx.xx.xx -m255.255.254.0 -d/dev/enet0 -fepics/hostname/bin/rtems5500-cexp.bin
+netShut
+go -a4000000
+
+
+Update Global Environment Area of NVRAM (Y/N) ? Y
+MVME5500>
+
+Note : (cxx.xx.xx.xx is the client IP address and 
+        sxx.xx.xx.xx is the server IP address)
+
+4) Other reference web sites:
+http://lansce.lanl.gov/EPICS/presentations/KateFeng%20RTEMS-mvme55001.ppt
+
+5) When generating code (especially C++) for this system, one should
+   use at least gcc-3.2 (preferrably a copy downloaded from the RTEMS
+   site [snapshot area] )
+
+6) To reboot the RTEMS-MVME5500 (board reset), one can invoke the
+   rtemsReboot() command at Cexp> prompt.
+ 
+7) Please reference http://www.slac.stanford.edu/~strauman/rtems
+for the source code and installation guidance of cexp, GeSys and
+other useful utilities such as telnet, nfs, and so on. 
+
+8) To get started with RTEMS/EPICS and to build development
+tools and BSP, I would recommend one to reference
+http://www.aps.anl.gov/epics/base/RTEMS/tutorial/
+in additional to the RTEMS document.
+
+
+TODO lists:
+1) 1 GHZ ethernet ( work in progress, to be released soon)
+2) To measure the interrupt latency and context switching.
+3) To implement the watchdog timer.
+
Index: c/src/lib/libbsp/powerpc/mvme5500/README.irq
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/README.irq	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/README.irq	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,52 @@
+README.irq : Shuchen Kate Feng  <feng1@bnl.gov>, 10/10/04
+
+
+The BSPirqPrioTable[] listed in irq_init.c is where the
+software developers can change the levels of priority
+for main interrupts based on the need of their
+applications.
+
+
+Presently, a dynamic IRQ table (e.g. mainIrqTbl[64]), which is
+arranged dynamically based on the priority levels of enabled
+main interrupts, is used in C_dispatch_irq_handler() to
+incorporate the handling of the software priority levels. 
+
+
+The valid entries listed in mainIrqTbl[64] by the BSP are:
+
+1. Main interrupt 59   (GPP31_24 : no enabled IRQ yet, 
+                        to enable 'watchdog timer' if needed)
+2. Main interrupt 57   (GPP15_8  : VME interrupt enabled,
+                        to enable 'PMC1' if needed)
+3. Main interrupt 58   (GPP23_16 : no enabled IRQ yet,
+                        to enable '1 GHZ ethernet' or 'PMC2'
+                        if needed)
+4. Main interrupt 32   (10/100 MHZ ethernet)
+5. Main interrupt 56   (GPP7_0 : presently only COM1/COM2 enabled)
+
+
+The main IRQs can be added to the mainIrqTbl[] dynamically
+via the BSP_enable_main_irq(), or removed from the mainIrqTbl[]
+dynamically via the BSP_disable_main_irq().
+
+
+Regarding other GPP interrupts not listed in the GPP7_0IrqTbl[8],
+GPP15_8IrqTbl[8], GPP23_16IrqTbl[8], or GPP31_24IrqTbl[8], they
+could be enabled by being added to the correspondent of
+the four aforementioned tables listed in the irq_init.c.
+
+
+Caveat: Presently, the eight GPP IRQs for each BSP_MAIN_GPPx_y_IRQ group
+are set at the same main priority in the BSPirqPrioTable[], while the 
+sub-priority levels for the eight GPP in each group  are sorted 
+statically by developers in the GPPx_yIrqTbl[8] from the highest
+priority to the lowest one.
+
+
+Note :
+1. GPP7-0   (Main interrupt high cause, bit 24)
+2. GPP15-8  (Main interrupt high cause, bit 25)
+3. GPP23-16 (Main interrupt high cause, bit 26)
+4. GPP31-24 (Main interrupt high cause, bit 27)
+
Index: c/src/lib/libbsp/powerpc/mvme5500/bsp_specs
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/bsp_specs	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/bsp_specs	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,25 @@
+%rename cpp old_cpp
+%rename lib old_lib
+%rename endfile old_endfile
+%rename startfile old_startfile
+%rename link old_link
+
+*cpp:
+%(old_cpp) %{qrtems: -D__embedded__ -DUSE_ENHANCED_INTR_API} -Asystem(embedded)
+
+*lib:
+%{!qrtems: %(old_lib)} %{!nostdlib: %{qrtems: --start-group \
+%{!qrtems_debug: -lrtemsbsp -lrtemscpu} %{qrtems_debug: -lrtemsbsp_g -lrtemscpu_g} \
+-lc -lgcc --end-group  \
+%{!qnolinkcmds: -T linkcmds%s}}}
+
+*startfile:
+%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems:  ecrti%O%s rtems_crti%O%s crtbegin.o%s  \
+%{!qrtems_debug: mvme5500start.o%s} \
+%{qrtems_debug: mvme5500start_g.o%s}}}
+
+*link:
+%{!qrtems: %(old_link)} %{qrtems: -Qy -dp -Bstatic -e __rtems_entry_point -u __vectors}
+
+*endfile:
+%{!qrtems: %(old_endfile)} %{qrtems: crtend.o%s ecrtn.o%s}
Index: c/src/lib/libbsp/powerpc/mvme5500/clock/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/clock/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/clock/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,24 @@
+##
+## Makefile.am,v 1.6 2002/12/17 15:10:31 ralf Exp
+##
+
+
+VPATH = @srcdir@:@srcdir@/../../shared/clock
+
+C_FILES = p_clock.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/clock/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/clock/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/clock/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,503 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../../shared/clock
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+C_FILES = p_clock.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = clock
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = $(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  clock/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile all-local
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+	clean-local distclean distclean-generic distdir dvi dvi-am info \
+	info-am install install-am install-data install-data-am \
+	install-exec install-exec-am install-info install-info-am \
+	install-man install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+	uninstall-am uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/configure
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/configure	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/configure	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,5586 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.57 for rtems-c-src-lib-libbsp-powerpc-mvme5500 4.6.2.
+#
+# Report bugs to <rtems-bugs@OARcorp.com>.
+#
+# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete.  It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='rtems-c-src-lib-libbsp-powerpc-mvme5500'
+PACKAGE_TARNAME='rtems-c-src-lib-libbsp-powerpc-mvme5500'
+PACKAGE_VERSION='4.6.2'
+PACKAGE_STRING='rtems-c-src-lib-libbsp-powerpc-mvme5500 4.6.2'
+PACKAGE_BUGREPORT='rtems-bugs@OARcorp.com'
+
+ac_unique_file="bsp_specs"
+ac_default_prefix=/opt/rtems-4.6
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAKE ENDIF RTEMS_TOPdir PROJECT_TOPdir PROJECT_ROOT build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os RTEMS_CPU INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPU_CFLAGS CFLAGS_OPTIMIZE_V CFLAGS_DEBUG_V CFLAGS_PROFILE_V RTEMS_BSP_FAMILY RTEMS_CPU_MODEL RTEMS_BSP RTEMS_BSP_SPECS GCC_SPECS PROJECT_INCLUDE PROJECT_RELEASE RTEMS_ROOT BARE_CPU_MODEL BARE_CPU_CFLAGS MULTILIB_TRUE MULTILIB_FALSE bsplibdir RTEMS_HOST PACKHEX HAS_MP RTEMS_CFLAGS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP RTEMS_USE_GCC_TRUE RTEMS_USE_GCC_FALSE RTEMS_CPPFLAGS AR AS LD NM RANLIB OBJCOPY SIZE RTEMS_HAS_NETWORKING HAS_NETWORKING HAS_NETWORKING_TRUE HAS_NETWORKING_FALSE CCAS CCASFLAGS exceptions LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_option in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    eval "enable_$ac_feature=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_$ac_feature='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_$ac_package='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/-/_/g'`
+    eval "with_$ac_package=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+    eval "$ac_envvar='$ac_optarg'"
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+              localstatedir libdir includedir oldincludedir infodir mandir
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$0" : 'X\(//\)[^/]' \| \
+         X"$0" : 'X\(//\)$' \| \
+         X"$0" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+   { (exit 1); exit 1; }; }
+  else
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+  fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+   { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CPU_CFLAGS_set=${CPU_CFLAGS+set}
+ac_env_CPU_CFLAGS_value=$CPU_CFLAGS
+ac_cv_env_CPU_CFLAGS_set=${CPU_CFLAGS+set}
+ac_cv_env_CPU_CFLAGS_value=$CPU_CFLAGS
+ac_env_CFLAGS_OPTIMIZE_V_set=${CFLAGS_OPTIMIZE_V+set}
+ac_env_CFLAGS_OPTIMIZE_V_value=$CFLAGS_OPTIMIZE_V
+ac_cv_env_CFLAGS_OPTIMIZE_V_set=${CFLAGS_OPTIMIZE_V+set}
+ac_cv_env_CFLAGS_OPTIMIZE_V_value=$CFLAGS_OPTIMIZE_V
+ac_env_CFLAGS_DEBUG_V_set=${CFLAGS_DEBUG_V+set}
+ac_env_CFLAGS_DEBUG_V_value=$CFLAGS_DEBUG_V
+ac_cv_env_CFLAGS_DEBUG_V_set=${CFLAGS_DEBUG_V+set}
+ac_cv_env_CFLAGS_DEBUG_V_value=$CFLAGS_DEBUG_V
+ac_env_CFLAGS_PROFILE_V_set=${CFLAGS_PROFILE_V+set}
+ac_env_CFLAGS_PROFILE_V_value=$CFLAGS_PROFILE_V
+ac_cv_env_CFLAGS_PROFILE_V_set=${CFLAGS_PROFILE_V+set}
+ac_cv_env_CFLAGS_PROFILE_V_value=$CFLAGS_PROFILE_V
+ac_env_RTEMS_BSP_FAMILY_set=${RTEMS_BSP_FAMILY+set}
+ac_env_RTEMS_BSP_FAMILY_value=$RTEMS_BSP_FAMILY
+ac_cv_env_RTEMS_BSP_FAMILY_set=${RTEMS_BSP_FAMILY+set}
+ac_cv_env_RTEMS_BSP_FAMILY_value=$RTEMS_BSP_FAMILY
+ac_env_RTEMS_CPU_MODEL_set=${RTEMS_CPU_MODEL+set}
+ac_env_RTEMS_CPU_MODEL_value=$RTEMS_CPU_MODEL
+ac_cv_env_RTEMS_CPU_MODEL_set=${RTEMS_CPU_MODEL+set}
+ac_cv_env_RTEMS_CPU_MODEL_value=$RTEMS_CPU_MODEL
+ac_env_RTEMS_BSP_set=${RTEMS_BSP+set}
+ac_env_RTEMS_BSP_value=$RTEMS_BSP
+ac_cv_env_RTEMS_BSP_set=${RTEMS_BSP+set}
+ac_cv_env_RTEMS_BSP_value=$RTEMS_BSP
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures rtems-c-src-lib-libbsp-powerpc-mvme5500 4.6.2 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+  cat <<_ACEOF
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --infodir=DIR          info documentation [PREFIX/info]
+  --mandir=DIR           man documentation [PREFIX/man]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of rtems-c-src-lib-libbsp-powerpc-mvme5500 4.6.2:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer
+  --enable-bare-cpu-cflags
+                          specify a particular cpu cflag (bare bsp specific)
+  --enable-bare-cpu-model specify a particular cpu model (bare bsp specific)
+  --enable-multilib       build many library versions (default=no)
+  --enable-multiprocessing
+                          enable multiprocessing interface
+  --disable-dependency-tracking Speeds up one-time builds
+  --enable-dependency-tracking  Do not reject slow dependency extractors
+  --enable-networking     enable TCP/IP stack
+
+Some influential environment variables:
+  CPU_CFLAGS  CFLAGS specifying CPU-dependent features
+  CFLAGS_OPTIMIZE_V
+              CFLAGS for building the OPTIMIZE variant
+  CFLAGS_DEBUG_V
+              CFLAGS for building the DEBUG variant
+  CFLAGS_PROFILE_V
+              CFLAGS for building the PROFILE variant
+  RTEMS_BSP_FAMILY
+              RTEMS's BSP directory
+  RTEMS_CPU_MODEL
+              RTEMS's cpu model
+  RTEMS_BSP   RTEMS_BSP to build
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+              headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  PPC_USE_DATA_CACHE
+              If defined, then the PowerPC specific code in RTEMS will use
+              data cache instructions to optimize the context switch code.
+              This code can conflict with debuggers or emulators. It is known
+              to break the Corelis PowerPC emulator with at least some
+              combinations of PowerPC 603e revisions and emulator versions.
+              The BSP actually contains the call that enables this.
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <rtems-bugs@OARcorp.com>.
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  ac_popdir=`pwd`
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d $ac_dir || continue
+    ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+    cd $ac_dir
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_srcdir/configure.gnu; then
+      echo
+      $SHELL $ac_srcdir/configure.gnu  --help=recursive
+    elif test -f $ac_srcdir/configure; then
+      echo
+      $SHELL $ac_srcdir/configure  --help=recursive
+    elif test -f $ac_srcdir/configure.ac ||
+           test -f $ac_srcdir/configure.in; then
+      echo
+      $ac_configure --help
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi
+    cd $ac_popdir
+  done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+  cat <<\_ACEOF
+rtems-c-src-lib-libbsp-powerpc-mvme5500 configure 4.6.2
+generated by GNU Autoconf 2.57
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by rtems-c-src-lib-libbsp-powerpc-mvme5500 $as_me 4.6.2, which was
+generated by GNU Autoconf 2.57.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+        ac_must_keep_next=false # Got value, back to normal.
+      else
+        case $ac_arg in
+          *=* | --config-cache | -C | -disable-* | --disable-* \
+          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+          | -with-* | --with-* | -without-* | --without-* | --x)
+            case "$ac_configure_args0 " in
+              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+            esac
+            ;;
+          -* ) ac_must_keep_next=true ;;
+        esac
+      fi
+      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+      # Get rid of the leading space.
+      ac_sep=" "
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+{
+  (set) 2>&1 |
+    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      sed -n \
+        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+      ;;
+    *)
+      sed -n \
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+}
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=$`echo $ac_var`
+      echo "$ac_var='"'"'$ac_val'"'"'"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=$`echo $ac_var`
+        echo "$ac_var='"'"'$ac_val'"'"'"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      sed "/^$/d" confdefs.h | sort
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      echo "$as_me: caught signal $ac_signal"
+    echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core core.* *.core &&
+  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+     ' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
+    esac
+  fi
+else
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+  eval ac_new_val="\$ac_env_${ac_var}_value"
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+        ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_aux_dir=
+for ac_dir in ../../../../../.. $srcdir/../../../../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f $ac_dir/shtool; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../../../.. $srcdir/../../../../../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ../../../../../.. $srcdir/../../../../../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+for ac_prog in gmake make
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_MAKE+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$MAKE"; then
+  ac_cv_prog_MAKE="$MAKE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_MAKE="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+MAKE=$ac_cv_prog_MAKE
+if test -n "$MAKE"; then
+  echo "$as_me:$LINENO: result: $MAKE" >&5
+echo "${ECHO_T}$MAKE" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$MAKE" && break
+done
+
+
+
+
+ENDIF=endif
+
+
+RTEMS_TOPdir="../../../../../..";
+
+
+test -n "$with_target_subdir" || with_target_subdir="."
+
+if test "$with_target_subdir" = "." ; then
+# Native
+PROJECT_TOPdir=${RTEMS_TOPdir}/'$(top_builddir)'
+else
+# Cross
+dots=`echo $with_target_subdir|\
+sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
+PROJECT_TOPdir=${dots}${RTEMS_TOPdir}/'$(top_builddir)'
+fi
+
+
+PROJECT_ROOT="${RTEMS_TOPdir}/\$(top_builddir)"
+
+
+echo "$as_me:$LINENO: checking for RTEMS Version" >&5
+echo $ECHO_N "checking for RTEMS Version... $ECHO_C" >&6
+if test -r "${srcdir}/${RTEMS_TOPdir}/aclocal/version.m4"; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: Unable to find ${RTEMS_TOPdir}/aclocal/version.m4" >&5
+echo "$as_me: error: Unable to find ${RTEMS_TOPdir}/aclocal/version.m4" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+echo "$as_me:$LINENO: result: 4.6.2" >&5
+echo "${ECHO_T}4.6.2" >&6
+
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+
+echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
+if test "${ac_cv_target+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+  ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
+target=$ac_cv_target
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+echo "$as_me:$LINENO: checking rtems target cpu" >&5
+echo $ECHO_N "checking rtems target cpu... $ECHO_C" >&6
+case "${target}" in
+  # hpux unix port should go here
+  i[34567]86-*linux*)		# unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  i[34567]86-*freebsd*) 	# unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  i[34567]86-pc-cygwin*) 	# Cygwin is just enough unix like :)
+	RTEMS_CPU=unix
+	;;
+  no_cpu-*rtems*)
+        RTEMS_CPU=no_cpu
+	;;
+  sparc-sun-solaris*)           # unix "simulator" port
+	RTEMS_CPU=unix
+	;;
+  tic4x-*rtems*)          	# gcc changed the name
+	RTEMS_CPU=c4x
+	;;
+  *)
+	RTEMS_CPU=`echo $target | sed 's%^\([^-]*\)-\(.*\)$%\1%'`
+	;;
+esac
+
+echo "$as_me:$LINENO: result: $RTEMS_CPU" >&5
+echo "${ECHO_T}$RTEMS_CPU" >&6
+
+am__api_version="1.7"
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+          if test $ac_prog = install &&
+            grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+            # AIX install.  It has an incompatible calling convention.
+            :
+          elif test $ac_prog = install &&
+            grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+            # program-specific install script used by HP pwplus--don't use.
+            :
+          else
+            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+            break 3
+          fi
+        fi
+      done
+    done
+    ;;
+esac
+done
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL=$ac_install_sh
+  fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+all:
+	@echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+  SET_MAKE=
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+ # test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=rtems-c-src-lib-libbsp-powerpc-mvme5500
+ VERSION=4.6.2
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+
+
+
+
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+  enableval="$enable_multilib"
+  case "${enableval}" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
+echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+ esac
+else
+  multilib=no
+fi;
+
+
+if test x"${multilib}" = x"yes"; then
+  MULTILIB_TRUE=
+  MULTILIB_FALSE='#'
+else
+  MULTILIB_TRUE='#'
+  MULTILIB_FALSE=
+fi
+
+
+
+
+
+# Is this a supported CPU?
+echo "$as_me:$LINENO: checking if cpu $RTEMS_CPU is supported" >&5
+echo $ECHO_N "checking if cpu $RTEMS_CPU is supported... $ECHO_C" >&6
+# FIXME: Temporary hack
+if test -d "$srcdir/$RTEMS_TOPdir/cpukit/score/cpu/$RTEMS_CPU"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  { { echo "$as_me:$LINENO: error: no" >&5
+echo "$as_me: error: no" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+
+# Check whether --enable-multiprocessing or --disable-multiprocessing was given.
+if test "${enable_multiprocessing+set}" = set; then
+  enableval="$enable_multiprocessing"
+  case "${enable_multiprocessing}" in
+  yes) ;;
+  no) ;;
+  *)  { { echo "$as_me:$LINENO: error: bad value ${enableval} for enable-multiprocessing option" >&5
+echo "$as_me: error: bad value ${enableval} for enable-multiprocessing option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+else
+  enable_multiprocessing=no
+fi;
+
+# account for "aliased" bsps which share source code
+  case $RTEMS_BSP in
+    simcpu32)     RTEMS_BSP_FAMILY=sim68000         ;; # BSVC CPU32 variant
+    c3xsim)       RTEMS_BSP_FAMILY=c4xsim           ;; # TI C3x Simulator in gdb
+    mcp750)       RTEMS_BSP_FAMILY=motorola_powerpc ;; # Motorola PPC board variant
+    mvme2307)     RTEMS_BSP_FAMILY=motorola_powerpc ;; # Motorola PPC board variant
+    mtx603e)      RTEMS_BSP_FAMILY=motorola_powerpc ;; # Motorola PPC board variant
+    mvme162lx)    RTEMS_BSP_FAMILY=mvme162          ;; # m68k - mvme162 board variant
+    gen68360_040) RTEMS_BSP_FAMILY=gen68360         ;; # m68k - 68360 in companion mode
+    p4600)        RTEMS_BSP_FAMILY=p4000            ;; # mips64orion - p4000 board w/IDT 4600
+    p4650)        RTEMS_BSP_FAMILY=p4000            ;; # mips64orion - p4000 board w/IDT 4650
+    mbx8*)        RTEMS_BSP_FAMILY=mbx8xx           ;; # MBX821/MBX860 board
+    pc386dx)      RTEMS_BSP_FAMILY=pc386            ;; # i386 - PC w/o FPU
+    pc486)        RTEMS_BSP_FAMILY=pc386            ;; # i386 - PC with i486DX
+    pc586)        RTEMS_BSP_FAMILY=pc386            ;; # i386 - PC with Pentium
+    pc686)        RTEMS_BSP_FAMILY=pc386            ;; # i386 - PC with PentiumPro
+    pck6)         RTEMS_BSP_FAMILY=pc386            ;; # i386 - PC with K6
+    bare*)        RTEMS_BSP_FAMILY=bare             ;; # EXP: bare-aliases
+    erc32nfp)     RTEMS_BSP_FAMILY=erc32            ;; # erc32 without fpu
+    leon1)     	  RTEMS_BSP_FAMILY=leon             ;; # leon without fpu
+    leon2)     	  RTEMS_BSP_FAMILY=leon             ;; # leon with fpu
+    simsh7032)    RTEMS_BSP_FAMILY=shsim            ;; # SH7032 simulator
+    simsh7045)    RTEMS_BSP_FAMILY=shsim            ;; # SH7045 simulator
+    *)            RTEMS_BSP_FAMILY=$RTEMS_BSP;;
+  esac
+
+
+
+
+  echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi;
+  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+
+  MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking for RTEMS_BSP" >&5
+echo $ECHO_N "checking for RTEMS_BSP... $ECHO_C" >&6
+if test "${rtems_cv_RTEMS_BSP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+    test -n "${RTEMS_BSP}" && rtems_cv_RTEMS_BSP="$RTEMS_BSP";
+
+fi
+if test -z "$rtems_cv_RTEMS_BSP"; then
+  { { echo "$as_me:$LINENO: error: Missing RTEMS_BSP" >&5
+echo "$as_me: error: Missing RTEMS_BSP" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+RTEMS_BSP="$rtems_cv_RTEMS_BSP"
+echo "$as_me:$LINENO: result: ${RTEMS_BSP}" >&5
+echo "${ECHO_T}${RTEMS_BSP}" >&6
+
+
+RTEMS_BSP_SPECS="-specs bsp_specs -qrtems"
+
+
+GCC_SPECS="-B\$(PROJECT_ROOT)/lib/ -B\$(PROJECT_ROOT)/$RTEMS_BSP/lib/"
+
+
+PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include"
+
+
+PROJECT_RELEASE="\$(PROJECT_ROOT)/$RTEMS_BSP"
+
+
+RTEMS_ROOT="\$(PROJECT_ROOT)/c/$RTEMS_BSP"
+
+
+
+# Check whether --enable-bare-cpu-cflags or --disable-bare-cpu-cflags was given.
+if test "${enable_bare_cpu_cflags+set}" = set; then
+  enableval="$enable_bare_cpu_cflags"
+  case "${enableval}" in
+  no) BARE_CPU_CFLAGS="" ;;
+  *)    BARE_CPU_CFLAGS="${enableval}" ;;
+esac
+else
+  BARE_CPU_CFLAGS=""
+fi;
+
+# Check whether --enable-bare-cpu-model or --disable-bare-cpu-model was given.
+if test "${enable_bare_cpu_model+set}" = set; then
+  enableval="$enable_bare_cpu_model"
+  case "${enableval}" in
+  no)   BARE_CPU_MODEL="" ;;
+  *)    BARE_CPU_MODEL="${enableval}" ;;
+esac
+else
+  BARE_CPU_MODEL=""
+fi;
+
+
+
+
+
+
+if false; then
+  MULTILIB_TRUE=
+  MULTILIB_FALSE='#'
+else
+  MULTILIB_TRUE='#'
+  MULTILIB_FALSE=
+fi
+
+
+includedir="\${exec_prefix}/${RTEMS_BSP}/lib/include"
+libdir="\${exec_prefix}/${RTEMS_BSP}/lib"
+
+bsplibdir="\${exec_prefix}/${RTEMS_BSP}/lib"
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking for make/custom/$RTEMS_BSP.cfg" >&5
+echo $ECHO_N "checking for make/custom/$RTEMS_BSP.cfg... $ECHO_C" >&6
+if test -r "$srcdir/$RTEMS_TOPdir/make/custom/$RTEMS_BSP.cfg"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  { { echo "$as_me:$LINENO: error: no" >&5
+echo "$as_me: error: no" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+
+
+
+RTEMS_HOST=$host_os
+case "${target}" in
+  # hpux unix port should go here
+  i[34567]86-*linux*)          # unix "simulator" port
+        RTEMS_HOST=Linux
+	;;
+  i[34567]86-*freebsd*)         # unix "simulator" port
+        RTEMS_HOST=FreeBSD
+	;;
+  i[34567]86-pc-cygwin*) 	# Cygwin is just enough unix like :)
+        RTEMS_HOST=Cygwin
+	;;
+  sparc-sun-solaris*)           # unix "simulator" port
+        RTEMS_HOST=Solaris
+	;;
+  *)
+	;;
+esac
+
+
+            ac_config_headers="$ac_config_headers include/bspopts.tmp:include/bspopts.h.in"
+
+
+
+PACKHEX="\$(PROJECT_TOPdir)/tools/build/packhex"
+
+
+
+
+echo "$as_me:$LINENO: checking if wanting multiprocessing" >&5
+echo $ECHO_N "checking if wanting multiprocessing... $ECHO_C" >&6
+if test "${rtems_cv_want_multiprocessing+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+    if test x"$multilib" = x"no"; then
+  # no cpukit
+       rtems_cv_want_multiprocessing="$enable_multiprocessing"
+
+else
+
+#HACK: Should check for RTEMS_MULTIPROCESSING in cpuopts.h, instead
+       rtems_cv_want_multiprocessing="$enable_multiprocessing"
+
+fi
+
+
+fi
+echo "$as_me:$LINENO: result: $rtems_cv_want_multiprocessing" >&5
+echo "${ECHO_T}$rtems_cv_want_multiprocessing" >&6
+
+if test "$rtems_cv_want_multiprocessing" = "yes"; then
+
+  echo "$as_me:$LINENO: checking whether BSP supports multiprocessing" >&5
+echo $ECHO_N "checking whether BSP supports multiprocessing... $ECHO_C" >&6
+if test "${rtems_cv_HAS_MP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+    if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/libbsp/${RTEMS_CPU}/${RTEMS_BSP_FAMILY}/shmsupp"; then
+        rtems_cv_HAS_MP="yes" ;
+    else
+        rtems_cv_HAS_MP="no";
+    fi
+
+fi
+echo "$as_me:$LINENO: result: $rtems_cv_HAS_MP" >&5
+echo "${ECHO_T}$rtems_cv_HAS_MP" >&6
+if test $rtems_cv_HAS_MP = "no"; then
+{ { echo "$as_me:$LINENO: error: multiprocessing requested but not supported" >&5
+echo "$as_me: error: multiprocessing requested but not supported" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  rtems_cv_HAS_MP="no";
+fi
+
+
+HAS_MP=$rtems_cv_HAS_MP
+
+
+
+
+rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+  DEPDIR=.deps
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+
+
+          ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+	@echo done
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+
+
+
+
+if test -n "${CFLAGS}"; then
+  RTEMS_CFLAGS=${CFLAGS}
+else
+  RTEMS_CFLAGS="\$(CPU_CFLAGS) \$(RTEMS_CFLAGS_\$(VARIANT_V)_V) \$(CFLAGS_\$(VARIANT_V)_V) -g"
+fi
+
+
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${rtems_tool_prefix}gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+test -z "$CC" && \
+  { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
+echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_CC" && break
+done
+
+  CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+     "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output" >&5
+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+  (eval $ac_link_default) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Find the output, starting from the most likely.  This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+        ;;
+    conftest.$ac_ext )
+        # This is the source file.
+        ;;
+    [ab].out )
+        # We found the default executable, but exeext='' is most
+        # certainly right.
+        break;;
+    *.* )
+        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+        # FIXME: I believe we export ac_cv_exeext for Libtool,
+        # but it would be cool to find out if it's true.  Does anybody
+        # maintain Libtool? --akim.
+        export ac_cv_exeext
+        break;;
+    * )
+        break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+   { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+  if { ac_try='./$ac_file'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+  fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+          export ac_cv_exeext
+          break;;
+    * ) break;;
+  esac
+done
+else
+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX 10.20 and later	-Ae
+# HP-UX older versions	-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+  x|xno)
+    echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+  *)
+    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+    CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C.  Since we use `exit',
+# in C++ we need to declare it.  In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+  choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  for ac_declaration in \
+   ''\
+   '#include <stdlib.h>' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
+fi
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC"   am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    echo '#include "conftest.h"' > conftest.c
+    echo 'int i;' > conftest.h
+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=conftest.c object=conftest.o \
+       depfile=conftest.Po tmpdepfile=conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o conftest.o conftest.c >/dev/null 2>&1 &&
+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      am_cv_CC_dependencies_compiler_type=$depmode
+      break
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+                     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+                     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+if test x"$GCC" = x"yes"; then
+  RTEMS_USE_GCC_TRUE=
+  RTEMS_USE_GCC_FALSE='#'
+else
+  RTEMS_USE_GCC_TRUE='#'
+  RTEMS_USE_GCC_FALSE=
+fi
+
+
+
+echo "$as_me:$LINENO: checking whether $CC accepts -isystem" >&5
+echo $ECHO_N "checking whether $CC accepts -isystem... $ECHO_C" >&6
+if test "${rtems_cv_gcc_isystem+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+rtems_cv_gcc_isystem=no
+if test x"$GCC" = x"yes"; then
+cat << EOF > conftest.h
+int conftest123();
+EOF
+cat << EOF > conftest.c
+#include <conftest.h>
+int conftest123() {}
+EOF
+  if test -z "`${CC} -isystem./ -c conftest.c 2>&1`";then
+    rtems_cv_gcc_isystem=yes
+  fi
+fi
+rm -f conftest*
+
+fi
+echo "$as_me:$LINENO: result: $rtems_cv_gcc_isystem" >&5
+echo "${ECHO_T}$rtems_cv_gcc_isystem" >&6
+
+
+echo "$as_me:$LINENO: checking whether $CC accepts --pipe" >&5
+echo $ECHO_N "checking whether $CC accepts --pipe... $ECHO_C" >&6
+if test "${rtems_cv_gcc_pipe+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+rtems_cv_gcc_pipe=no
+if test x"$GCC" = x"yes"; then
+    echo 'void f(){}' >conftest.c
+    if test -z "`${CC} --pipe -c conftest.c 2>&1`";then
+      rtems_cv_gcc_pipe=yes
+    fi
+    rm -f conftest*
+fi
+
+fi
+echo "$as_me:$LINENO: result: $rtems_cv_gcc_pipe" >&5
+echo "${ECHO_T}$rtems_cv_gcc_pipe" >&6
+
+test "$rtems_cv_gcc_pipe" = "yes" && CC="$CC --pipe"
+
+
+echo "$as_me:$LINENO: checking whether $CC accepts -specs" >&5
+echo $ECHO_N "checking whether $CC accepts -specs... $ECHO_C" >&6
+if test "${rtems_cv_gcc_specs+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+rtems_cv_gcc_specs=no
+if test x"$GCC" = x"yes"; then
+  touch confspec
+  echo 'void f(){}' >conftest.c
+  if test -z "`${CC} -specs confspec -c conftest.c 2>&1`";then
+    rtems_cv_gcc_specs=yes
+  fi
+fi
+rm -f confspec conftest*
+
+fi
+echo "$as_me:$LINENO: result: $rtems_cv_gcc_specs" >&5
+echo "${ECHO_T}$rtems_cv_gcc_specs" >&6
+
+if test "$GCC" = yes; then
+RTEMS_CFLAGS="$RTEMS_CFLAGS -Wall"
+RTEMS_CFLAGS="$RTEMS_CFLAGS -ansi -fasm"
+fi
+
+if test x"$rtems_cv_gcc_isystem" = x"yes"; then
+
+  RTEMS_CPPFLAGS="-isystem \$(PROJECT_INCLUDE)"
+else
+
+  RTEMS_CPPFLAGS="-I\$(PROJECT_INCLUDE)"
+
+fi
+
+
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}ar", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="${rtems_tool_prefix}ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="no"
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}as", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}as; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AS="${rtems_tool_prefix}as"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="no"
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}ld", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}ld; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$LD"; then
+  ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LD="${rtems_tool_prefix}ld"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_LD" && ac_cv_prog_LD="no"
+fi
+fi
+LD=$ac_cv_prog_LD
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}nm", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}nm; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$NM"; then
+  ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_NM="${rtems_tool_prefix}nm"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_NM" && ac_cv_prog_NM="no"
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+  echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${rtems_tool_prefix}ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}objcopy", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}objcopy; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJCOPY+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$OBJCOPY"; then
+  ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OBJCOPY="${rtems_tool_prefix}objcopy"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_OBJCOPY" && ac_cv_prog_OBJCOPY="no"
+fi
+fi
+OBJCOPY=$ac_cv_prog_OBJCOPY
+if test -n "$OBJCOPY"; then
+  echo "$as_me:$LINENO: result: $OBJCOPY" >&5
+echo "${ECHO_T}$OBJCOPY" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}size", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}size; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_SIZE+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$SIZE"; then
+  ac_cv_prog_SIZE="$SIZE" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_SIZE="${rtems_tool_prefix}size"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_SIZE" && ac_cv_prog_SIZE="no"
+fi
+fi
+SIZE=$ac_cv_prog_SIZE
+if test -n "$SIZE"; then
+  echo "$as_me:$LINENO: result: $SIZE" >&5
+echo "${ECHO_T}$SIZE" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+  if test "x$build_alias" != "x$host_alias"; then
+  rtems_tool_prefix=${ac_tool_prefix}
+fi
+
+  # Extract the first word of "${rtems_tool_prefix}strip", so it can be a program name with args.
+set dummy ${rtems_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${rtems_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+
+
+
+
+# Check whether --enable-networking or --disable-networking was given.
+if test "${enable_networking+set}" = set; then
+  enableval="$enable_networking"
+  case "${enableval}" in
+  yes) RTEMS_HAS_NETWORKING=yes ;;
+  no) RTEMS_HAS_NETWORKING=no ;;
+  *)  { { echo "$as_me:$LINENO: error: bad value ${enableval} for enable-networking option" >&5
+echo "$as_me: error: bad value ${enableval} for enable-networking option" >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+else
+  RTEMS_HAS_NETWORKING=yes
+fi;
+
+
+echo "$as_me:$LINENO: checking whether BSP supports networking" >&5
+echo $ECHO_N "checking whether BSP supports networking... $ECHO_C" >&6
+if test "${rtems_cv_HAS_NETWORKING+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      case "$RTEMS_CPU" in
+    unix*)
+      rtems_cv_HAS_NETWORKING="no"
+      ;;
+    *)
+      if test "${RTEMS_HAS_NETWORKING}" = "yes"; then
+        rtems_cv_HAS_NETWORKING="yes";
+      else
+        rtems_cv_HAS_NETWORKING="disabled";
+      fi
+      ;;
+    esac
+fi
+echo "$as_me:$LINENO: result: $rtems_cv_HAS_NETWORKING" >&5
+echo "${ECHO_T}$rtems_cv_HAS_NETWORKING" >&6
+if test "$rtems_cv_HAS_NETWORKING" = "yes"; then
+  HAS_NETWORKING="yes";
+else
+  HAS_NETWORKING="no";
+fi
+
+
+
+if test "$HAS_NETWORKING" = "yes"; then
+  HAS_NETWORKING_TRUE=
+  HAS_NETWORKING_FALSE='#'
+else
+  HAS_NETWORKING_TRUE='#'
+  HAS_NETWORKING_FALSE=
+fi
+
+
+AS=$CC
+# By default we simply use the C compiler to build assembly code.
+
+: ${CCAS='$(CC)'}
+# Set ASFLAGS if not already set.
+: ${CCASFLAGS='$(CFLAGS)'}
+
+
+
+
+
+
+
+
+
+case ${RTEMS_BSP} in
+* )
+  PPC_USE_DATA_CACHE=${PPC_USE_DATA_CACHE-1} ;;
+esac
+if test -n "${PPC_USE_DATA_CACHE}"; then
+cat >>confdefs.h <<_ACEOF
+#define PPC_USE_DATA_CACHE $PPC_USE_DATA_CACHE
+_ACEOF
+fi
+
+
+
+# Explicitly list all Makefiles here
+                                                                                                                                  ac_config_files="$ac_config_files Makefile clock/Makefile console/Makefile include/Makefile pci/Makefile GT64260/Makefile network/Makefile irq/Makefile start/Makefile startup/Makefile vectors/Makefile vme/Makefile wrapup/Makefile"
+
+
+
+exceptions="new_exception_processing"
+
+
+
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+  (set) 2>&1 |
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+        "s/'/'\\\\''/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;;
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n \
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} |
+  sed '
+     t clear
+     : clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+  if test -w $cache_file; then
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+    cat confcache >$cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ 	]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ 	]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_i=`echo "$ac_i" |
+         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+  # 2. Add them.
+  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${MULTILIB_TRUE}" && test -z "${MULTILIB_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"MULTILIB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MULTILIB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${MULTILIB_TRUE}" && test -z "${MULTILIB_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"MULTILIB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MULTILIB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${RTEMS_USE_GCC_TRUE}" && test -z "${RTEMS_USE_GCC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"RTEMS_USE_GCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"RTEMS_USE_GCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${HAS_NETWORKING_TRUE}" && test -z "${HAS_NETWORKING_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"HAS_NETWORKING\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAS_NETWORKING\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by rtems-c-src-lib-libbsp-powerpc-mvme5500 $as_me 4.6.2, which was
+generated by GNU Autoconf 2.57.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+  --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+rtems-c-src-lib-libbsp-powerpc-mvme5500 config.status 4.6.2
+configured by $0, generated by GNU Autoconf 2.57,
+  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "clock/Makefile" ) CONFIG_FILES="$CONFIG_FILES clock/Makefile" ;;
+  "console/Makefile" ) CONFIG_FILES="$CONFIG_FILES console/Makefile" ;;
+  "include/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
+  "pci/Makefile" ) CONFIG_FILES="$CONFIG_FILES pci/Makefile" ;;
+  "GT64260/Makefile" ) CONFIG_FILES="$CONFIG_FILES GT64260/Makefile" ;;
+  "network/Makefile" ) CONFIG_FILES="$CONFIG_FILES network/Makefile" ;;
+  "irq/Makefile" ) CONFIG_FILES="$CONFIG_FILES irq/Makefile" ;;
+  "start/Makefile" ) CONFIG_FILES="$CONFIG_FILES start/Makefile" ;;
+  "startup/Makefile" ) CONFIG_FILES="$CONFIG_FILES startup/Makefile" ;;
+  "vectors/Makefile" ) CONFIG_FILES="$CONFIG_FILES vectors/Makefile" ;;
+  "vme/Makefile" ) CONFIG_FILES="$CONFIG_FILES vme/Makefile" ;;
+  "wrapup/Makefile" ) CONFIG_FILES="$CONFIG_FILES wrapup/Makefile" ;;
+  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+  "include/bspopts.tmp" ) CONFIG_HEADERS="$CONFIG_HEADERS include/bspopts.tmp:include/bspopts.h.in" ;;
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@MAKE@,$MAKE,;t t
+s,@ENDIF@,$ENDIF,;t t
+s,@RTEMS_TOPdir@,$RTEMS_TOPdir,;t t
+s,@PROJECT_TOPdir@,$PROJECT_TOPdir,;t t
+s,@PROJECT_ROOT@,$PROJECT_ROOT,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@RTEMS_CPU@,$RTEMS_CPU,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
+s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
+s,@MAINT@,$MAINT,;t t
+s,@CPU_CFLAGS@,$CPU_CFLAGS,;t t
+s,@CFLAGS_OPTIMIZE_V@,$CFLAGS_OPTIMIZE_V,;t t
+s,@CFLAGS_DEBUG_V@,$CFLAGS_DEBUG_V,;t t
+s,@CFLAGS_PROFILE_V@,$CFLAGS_PROFILE_V,;t t
+s,@RTEMS_BSP_FAMILY@,$RTEMS_BSP_FAMILY,;t t
+s,@RTEMS_CPU_MODEL@,$RTEMS_CPU_MODEL,;t t
+s,@RTEMS_BSP@,$RTEMS_BSP,;t t
+s,@RTEMS_BSP_SPECS@,$RTEMS_BSP_SPECS,;t t
+s,@GCC_SPECS@,$GCC_SPECS,;t t
+s,@PROJECT_INCLUDE@,$PROJECT_INCLUDE,;t t
+s,@PROJECT_RELEASE@,$PROJECT_RELEASE,;t t
+s,@RTEMS_ROOT@,$RTEMS_ROOT,;t t
+s,@BARE_CPU_MODEL@,$BARE_CPU_MODEL,;t t
+s,@BARE_CPU_CFLAGS@,$BARE_CPU_CFLAGS,;t t
+s,@MULTILIB_TRUE@,$MULTILIB_TRUE,;t t
+s,@MULTILIB_FALSE@,$MULTILIB_FALSE,;t t
+s,@bsplibdir@,$bsplibdir,;t t
+s,@RTEMS_HOST@,$RTEMS_HOST,;t t
+s,@PACKHEX@,$PACKHEX,;t t
+s,@HAS_MP@,$HAS_MP,;t t
+s,@RTEMS_CFLAGS@,$RTEMS_CFLAGS,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@CPP@,$CPP,;t t
+s,@RTEMS_USE_GCC_TRUE@,$RTEMS_USE_GCC_TRUE,;t t
+s,@RTEMS_USE_GCC_FALSE@,$RTEMS_USE_GCC_FALSE,;t t
+s,@RTEMS_CPPFLAGS@,$RTEMS_CPPFLAGS,;t t
+s,@AR@,$AR,;t t
+s,@AS@,$AS,;t t
+s,@LD@,$LD,;t t
+s,@NM@,$NM,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@OBJCOPY@,$OBJCOPY,;t t
+s,@SIZE@,$SIZE,;t t
+s,@RTEMS_HAS_NETWORKING@,$RTEMS_HAS_NETWORKING,;t t
+s,@HAS_NETWORKING@,$HAS_NETWORKING,;t t
+s,@HAS_NETWORKING_TRUE@,$HAS_NETWORKING_TRUE,;t t
+s,@HAS_NETWORKING_FALSE@,$HAS_NETWORKING_FALSE,;t t
+s,@CCAS@,$CCAS,;t t
+s,@CCASFLAGS@,$CCASFLAGS,;t t
+s,@exceptions@,$exceptions,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+  cat >>$CONFIG_STATUS <<\_ACEOF
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+  	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+  	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
+  fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+        cat >$tmp/stdin
+        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$ac_file" : 'X\(//\)[^/]' \| \
+         X"$ac_file" : 'X\(//\)$' \| \
+         X"$ac_file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  esac
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+                                     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+         # Absolute (can't be DOS-style, as IFS=:)
+         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         echo $f;;
+      *) # Relative
+         if test -f "$f"; then
+           # Build tree
+           echo $f
+         elif test -f "$srcdir/$f"; then
+           # Source tree
+           echo $srcdir/$f
+         else
+           # /dev/null tree
+           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='[ 	].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+        cat >$tmp/stdin
+        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+         # Absolute (can't be DOS-style, as IFS=:)
+         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         echo $f;;
+      *) # Relative
+         if test -f "$f"; then
+           # Build tree
+           echo $f
+         elif test -f "$srcdir/$f"; then
+           # Source tree
+           echo $srcdir/$f
+         else
+           # /dev/null tree
+           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+  # Remove the trailing spaces.
+  sed 's/[ 	]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h.  The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status.  Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*\)\(([^)]*)\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless.  Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo '  if grep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo '  :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+  # Write a limited-size here document to $tmp/defines.sed.
+  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#define' lines.
+  echo '/^[ 	]*#[ 	]*define/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/defines.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+  rm -f conftest.defines
+  mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo '  fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+  # Write a limited-size here document to $tmp/undefs.sed.
+  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#undef'
+  echo '/^[ 	]*#[ 	]*undef/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+  rm -f conftest.undefs
+  mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    echo "/* Generated by configure.  */" >$tmp/config.h
+  else
+    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
+  fi
+  cat $tmp/in >>$tmp/config.h
+  rm -f $tmp/in
+  if test x"$ac_file" != x-; then
+    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$ac_file" : 'X\(//\)[^/]' \| \
+         X"$ac_file" : 'X\(//\)$' \| \
+         X"$ac_file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+      { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+      rm -f $ac_file
+      mv $tmp/config.h $ac_file
+    fi
+  else
+    cat $tmp/config.h
+    rm -f $tmp/config.h
+  fi
+_am_stamp_count=`expr ${_am_stamp_count-0} + 1`
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X$ac_file : 'X\(//\)[^/]' \| \
+         X$ac_file : 'X\(//\)$' \| \
+         X$ac_file : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`/stamp-h$_am_stamp_count
+  # Run the commands associated with the file.
+  case $ac_file in
+    include/bspopts.tmp )
+echo "/* BSP dependent options file */"         >$tmp/config.h
+echo "/* automatically generated -- DO NOT EDIT!! */" >>$tmp/config.h
+echo                                                  >>$tmp/config.h
+echo "#ifndef __BSP_OPTIONS_h"                        >>$tmp/config.h
+echo "#define __BSP_OPTIONS_h"                        >>$tmp/config.h
+echo                                                  >>$tmp/config.h
+sed -e '/.*PACKAGE.*/d' include/bspopts.tmp >> $tmp/config.h
+echo                                                  >>$tmp/config.h
+echo "#endif"                                         >>$tmp/config.h
+  if cmp -s include/bspopts.h $tmp/config.h 2>/dev/null; then
+
+    { echo "$as_me:$LINENO: include/bspopts.h is unchanged" >&5
+echo "$as_me: include/bspopts.h is unchanged" >&6;}
+    rm -f $tmp/config.h
+else
+
+    { echo "$as_me:$LINENO: creating include/bspopts.h" >&5
+echo "$as_me: creating include/bspopts.h" >&6;}
+    rm -f include/bspopts.h
+    mv $tmp/config.h include/bspopts.h
+
+fi
+
+ ;;
+  esac
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$ac_dest" : 'X\(//\)[^/]' \| \
+         X"$ac_dest" : 'X\(//\)$' \| \
+         X"$ac_dest" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+
+  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+  case $ac_dest in
+    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$mf" : 'X\(//\)[^/]' \| \
+         X"$mf" : 'X\(//\)$' \| \
+         X"$mf" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  else
+    continue
+  fi
+  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
+  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n -e '/^U = / s///p' < "$mf"`
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n -e '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$file" : 'X\(//\)[^/]' \| \
+         X"$file" : 'X\(//\)$' \| \
+         X"$file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    { if $as_mkdir_p; then
+    mkdir -p $dirpart/$fdir
+  else
+    as_dir=$dirpart/$fdir
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+ ;;
+  esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+ exceptions_subdirs="new_exception_processing"
+ updir=/../support
+
+if test "$no_recursion" != yes; then
+
+
+
+ac_sub_configure_args_prune()
+{
+  # Remove --cache-file and --srcdir arguments so they do not pile up.
+  ac_sub_configure_args=
+  ac_prev=
+  for ac_arg
+  do
+    if test -n "$ac_prev"; then
+      ac_prev=
+      continue
+    fi
+    case $ac_arg in
+    -cache-file | --cache-file | --cache-fil | --cache-fi \
+    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+	  ac_prev=cache_file ;;
+    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
+    | --c=*)
+      ;;
+    --config-cache | -C)
+      ;;
+    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+	  ac_prev=srcdir ;;
+    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+      ;;
+
+    *) ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
+    esac
+  done
+  export ac_sub_configure_args
+}
+
+eval ac_sub_configure_args_prune $ac_configure_args
+
+
+  for ac_subdir in : $exceptions_subdirs; do test "x$ac_subdir" = x: && continue
+
+    # Do not complain, so a configure script can configure whichever
+    # parts of a large source tree are present.
+    test -d $srcdir${updir}/$ac_subdir || continue
+
+    { echo "$as_me:$LINENO: configuring in $ac_subdir" >&5
+echo "$as_me: configuring in $ac_subdir" >&6;}
+    case $srcdir in
+    .) ;;
+    *) { if $as_mkdir_p; then
+    mkdir -p "./$ac_subdir"
+  else
+    as_dir="./$ac_subdir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"./$ac_subdir\"" >&5
+echo "$as_me: error: cannot create directory \"./$ac_subdir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+       if test -d ./$ac_subdir; then :;
+       else
+         { { echo "$as_me:$LINENO: error: cannot create \`pwd\`/$ac_subdir" >&5
+echo "$as_me: error: cannot create \`pwd\`/$ac_subdir" >&2;}
+   { (exit 1); exit 1; }; }
+       fi
+       ;;
+    esac
+
+    ac_popdir=`pwd`
+    cd $ac_subdir
+
+    # A "../" for each directory in /$ac_subdir.
+    ac_dots=`echo $ac_subdir |
+             sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`
+
+    case $srcdir in
+    .) # No --srcdir option.  We are building in place.
+      ac_sub_srcdir=$srcdir${updir} ;;
+    [\\/]* | ?:[\\/]* ) # Absolute path.
+      ac_sub_srcdir=$srcdir${updir}/$ac_subdir ;;
+    *) # Relative path.
+      ac_sub_srcdir=$ac_dots$srcdir${updir}/$ac_subdir ;;
+    esac
+
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_sub_srcdir/configure.gnu; then
+      ac_sub_configure="$SHELL '$ac_sub_srcdir/configure.gnu'"
+    elif test -f $ac_sub_srcdir/configure; then
+      ac_sub_configure="$SHELL '$ac_sub_srcdir/configure'"
+    elif test -f $ac_sub_srcdir/configure.in; then
+      ac_sub_configure=$ac_configure
+    else
+      { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_subdir" >&5
+echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2;}
+      ac_sub_configure=
+    fi
+
+    # The recursion is here.
+    if test -n "$ac_sub_configure"; then
+      # Make the cache file name correct relative to the subdirectory.
+      case $cache_file in
+      [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
+      *) # Relative path.
+        ac_sub_cache_file=$ac_dots$cache_file ;;
+      esac
+
+      { echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir" >&5
+echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir" >&6;}
+      # The eval makes quoting arguments work.
+      eval $ac_sub_configure $ac_sub_configure_args \
+           --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir ||
+        { { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_subdir" >&5
+echo "$as_me: error: $ac_sub_configure failed for $ac_subdir" >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+
+    cd "$ac_popdir"
+  done
+fi
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+
Index: c/src/lib/libbsp/powerpc/mvme5500/configure.ac
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/configure.ac	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/configure.ac	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,51 @@
+## Process this file with autoconf to produce a configure script.
+## 
+## configure.ac,v 1.9.2.2 2003/03/06 10:42:42 ralf Exp
+
+AC_PREREQ(2.57)
+AC_INIT([rtems-c-src-lib-libbsp-powerpc-mvme5500],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
+AC_CONFIG_SRCDIR([bsp_specs])
+RTEMS_TOP(../../../../../..)
+
+RTEMS_CANONICAL_TARGET_CPU
+AM_INIT_AUTOMAKE([no-define foreign 1.7.2])
+RTEMS_BSP_CONFIGURE
+
+RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
+RTEMS_CANONICALIZE_TOOLS
+
+RTEMS_CHECK_NETWORKING
+AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
+
+AS=$CC
+AM_PROG_AS
+
+RTEMS_BSPOPTS_SET([PPC_USE_DATA_CACHE],[*],[1])
+RTEMS_BSPOPTS_HELP([PPC_USE_DATA_CACHE],
+[If defined, then the PowerPC specific code in RTEMS will use
+ data cache instructions to optimize the context switch code.
+ This code can conflict with debuggers or emulators.  It is known
+ to break the Corelis PowerPC emulator with at least some combinations
+ of PowerPC 603e revisions and emulator versions.
+ The BSP actually contains the call that enables this.])
+
+
+# Explicitly list all Makefiles here
+AC_CONFIG_FILES([Makefile
+clock/Makefile
+console/Makefile
+include/Makefile
+pci/Makefile
+GT64260/Makefile
+network/Makefile
+irq/Makefile
+tod/Makefile
+start/Makefile
+startup/Makefile
+vectors/Makefile
+vme/Makefile
+wrapup/Makefile])
+
+RTEMS_PPC_EXCEPTIONS([new])
+
+AC_OUTPUT
Index: c/src/lib/libbsp/powerpc/mvme5500/console/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/console/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/console/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,33 @@
+##
+## $Id$
+##
+
+VPATH = @srcdir@:@srcdir@/../../shared/console
+
+C_FILES = uart.c console.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+H_FILES = ../../shared/console/uart.h
+
+OBJS = $(C_O_FILES)
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = ../../shared/console/uart.h
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/uart.h:../../shared/console/uart.h
+	$(INSTALL_DATA) $< $@
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/uart.h
+
+AM_CPPFLAGS += -DSTATIC_LOG_ALLOC
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/console/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/console/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/console/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,582 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../../shared/console
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+C_FILES = uart.c console.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+H_FILES = ../../shared/console/uart.h
+
+OBJS = $(C_O_FILES)
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = ../../shared/console/uart.h
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS) -DSTATIC_LOG_ALLOC
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/uart.h
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = console
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_bsp_HEADERS)
+
+DIST_COMMON = $(include_bsp_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  console/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+include_bspHEADERS_INSTALL = $(INSTALL_HEADER)
+install-include_bspHEADERS: $(include_bsp_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f"; \
+	  $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+uninstall-include_bspHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(include_bspdir)/$$f"; \
+	  rm -f $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake $(distdir)/../../shared/console
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-include_bspHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-include_bspHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic clean-local ctags distclean distclean-generic \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-include_bspHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-include_bspHEADERS uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/uart.h:../../shared/console/uart.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/include/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/include/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/include/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,26 @@
+##
+## Kate Feng
+##
+
+VPATH = @srcdir@:@srcdir@/../../shared/console
+
+include_HEADERS = bspopts.h
+include_HEADERS += bsp.h 
+
+H_FILES = bsp.h 
+
+include_bspdir = $(includedir)/bsp 
+
+$(PROJECT_INCLUDE):
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/%.h: %.h
+	$(INSTALL_DATA) $< $@
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
+
+all-local: $(PREINSTALL_FILES) $(ARCH) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/include/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/include/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/include/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,437 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../../shared/console
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+CC = @CC@
+CCAS = @CCAS@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+include_HEADERS = bspopts.h bsp.h 
+
+H_FILES = bsp.h 
+
+include_bspdir = $(includedir)/bsp 
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h $(PROJECT_INCLUDE)/bspopts.h
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = include
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_HEADERS)
+
+DIST_COMMON = $(include_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in bspopts.h.in
+all: bspopts.tmp
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  include/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+bspopts.tmp: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/bspopts.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status include/bspopts.tmp
+
+$(srcdir)/bspopts.h.in: @MAINTAINER_MODE_TRUE@ $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	touch $(srcdir)/bspopts.h.in
+
+distclean-hdr:
+	-rm -f bspopts.tmp stamp-h1
+uninstall-info-am:
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \
+	  $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
+	  rm -f $(DESTDIR)$(includedir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES) bspopts.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) bspopts.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) bspopts.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) bspopts.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) bspopts.tmp all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-includeHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic ctags distclean distclean-generic distclean-hdr \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-includeHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-includeHEADERS uninstall-info-am
+
+
+$(PROJECT_INCLUDE):
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/%.h: %.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(PREINSTALL_FILES) $(ARCH) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/include/bsp.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/include/bsp.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/include/bsp.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,109 @@
+/*
+ *  bsp.h  -- contain BSP API definition.
+ *
+ *  Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
+ *
+ *  The license and distribution terms for this file may be
+ *  found in found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  S. Kate Feng 12/03 : Modified it to support the MVME5500 board.
+ *
+ */
+
+#ifndef LIBBSP_POWERPC_MVME5500_BSP_H
+#define LIBBSP_POWERPC_MVME5500_BSP_H
+
+#include <bspopts.h>
+
+#include <rtems.h>
+#include <console.h>
+#include <clockdrv.h>
+#include <libcpu/io.h>
+#include <bsp/vectors.h>
+
+#include <bsp/bspMvme5500.h>
+
+/* fundamental addresses for this BSP (PREPxxx are from libcpu/io.h) */
+#define _IO_BASE GT64260_REG_BASE
+
+/* PCI0 Domain I/O space */
+#define PCI0_IO_BASE            0xf0000000
+#define PCI1_IO_BASE            0xf0800000
+
+/* PCI 0 memory space as seen from the CPU */
+#define PCI0_MEM_BASE		0x80000000
+#define PCI_MEM_BASE            0  /* glue for vmeUniverse */
+
+/* address of our ram on the PCI bus */
+#define	PCI_DRAM_OFFSET	        0
+
+/* PCI 1 memory space as seen from the CPU */
+#define PCI1_MEM_BASE		0xe0000000
+#define PCI1_MEM_SIZE           0x10000000
+
+/* The glues to Till's vmeUniverse, although the name does not
+ * actually reflect the relevant architect of the MVME5500.
+ * Till TODO ? :  BSP_PCI_DO_EOI instead ? 
+ * BSP_EXT_IRQ0 instead of BSP_PCI_IRQ0 ?
+ *
+ */
+#define BSP_PIC_DO_EOI  inl(0xc34)  /* PCI IACK */
+#define BSP_PCI_IRQ0 BSP_GPP_IRQ_LOWEST_OFFSET
+
+/*
+ *  confdefs.h overrides for this BSP:
+ *   - termios serial ports (defaults to 1)
+ *   - Interrupt stack space is not minimum if defined.
+ */
+
+#define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2
+#define CONFIGURE_INTERRUPT_STACK_MEMORY  (16 * 1024)
+
+/* uart.c uses out_8 instead of outb  */
+#define BSP_UART_IOBASE_COM1	GT64260_DEV1_BASE + 0x20000
+#define BSP_UART_IOBASE_COM2	GT64260_DEV1_BASE + 0x21000
+
+#define BSP_CONSOLE_PORT		BSP_UART_COM1  /* console */
+#define BSP_UART_BAUD_BASE		115200
+
+/*
+ * Vital Board data Start using DATA RESIDUAL
+ */
+/*
+ * Total memory using RESIDUAL DATA
+ */
+extern unsigned int BSP_mem_size;
+/*
+ * PCI Bus Frequency
+ */
+extern unsigned int BSP_bus_frequency;
+/*
+ * processor clock frequency
+ */
+extern unsigned int BSP_processor_frequency;
+/*
+ * Time base divisior (how many tick for 1 second).
+ */
+extern unsigned int BSP_time_base_divisor;
+
+#define BSP_Convert_decrementer( _value ) \
+  ((unsigned long long) ((((unsigned long long)BSP_time_base_divisor) * 1000000ULL) /((unsigned long long) BSP_bus_frequency)) * ((unsigned long long) (_value)))
+
+extern rtems_configuration_table  BSP_Configuration;
+extern void BSP_panic(char *s);
+extern void rtemsReboot(void);
+/* extern int printk(const char *, ...) __attribute__((format(printf, 1, 2))); */
+extern int BSP_disconnect_clock_handler (void);
+extern int BSP_connect_clock_handler (void);
+
+extern unsigned long _BSP_clear_hostbridge_errors();
+
+#define RTEMS_BSP_NETWORK_DRIVER_NAME	"gt1"
+#define RTEMS_BSP_NETWORK_DRIVER_ATTACH	rtems_GT64260eth_driver_attach
+
+extern int
+RTEMS_BSP_NETWORK_DRIVER_ATTACH(/* struct rtems_bsdnet_ifconfig * */);
+
+
+#endif 
Index: c/src/lib/libbsp/powerpc/mvme5500/include/bspopts.h.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/include/bspopts.h.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/include/bspopts.h.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,23 @@
+/* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* If defined, then the PowerPC specific code in RTEMS will use data cache
+   instructions to optimize the context switch code. This code can conflict
+   with debuggers or emulators. It is known to break the Corelis PowerPC
+   emulator with at least some combinations of PowerPC 603e revisions and
+   emulator versions. The BSP actually contains the call that enables this. */
+#undef PPC_USE_DATA_CACHE
Index: c/src/lib/libbsp/powerpc/mvme5500/irq/GT64260Int.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/irq/GT64260Int.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/irq/GT64260Int.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,245 @@
+/* GT64260Int.c - GT64260 Interrupt controller support functions 
+ *
+ * Copyright 2003, 2004, Brookhaven National Laboratory and
+ *                 Shuchen Kate Feng <feng1@bnl.gov>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution.
+ *
+ */
+#include <libcpu/io.h>
+#include <rtems/bspIo.h> /* for printk */
+
+#include "bsp/gtreg.h"
+#include "bsp/irq.h"
+
+extern rtems_irq_prio BSPirqPrioTable[BSP_MAIN_IRQ_NUMBER];
+
+rtems_GTirq_masks GT_GPPirq_cache=0; 
+rtems_GTirq_masks GT_MAINirqLO_cache=0, GT_MAINirqHI_cache=0;
+
+void BSP_GT64260INT_init()
+{
+
+    /* Page 401, Table 598:
+     * Comm Unit Arbiter Control register :
+     * bit 10:GPP interrupts as level sensitive(1) or edge sensitive(0).
+     * We set the GPP interrupts to be edge sensitive.
+     * MOTload default is set as level sensitive(1).
+     */
+    outl((inl(GT_CommUnitArb_Ctrl)& (~(1<<10))), GT_CommUnitArb_Ctrl);
+
+    /* Initialize the interrupt related GT64260 registers */
+    outl( 0, GT_CPU_INT_MASK_LO);
+    outl( 0, GT_CPU_INT_MASK_HI);
+
+    outl( 0, GT_PCI0_INT_MASK_LO);
+    outl( 0, GT_PCI0_INT_MASK_HI);
+
+
+    outl( 0, GT_PCI1_INT_MASK_LO);
+    outl( 0, GT_PCI1_INT_MASK_HI);
+ 
+    outl( 0, GT_CPU_INT0_MASK);
+    outl( 0, GT_CPU_INT1_MASK);
+    outl( 0, GT_CPU_INT2_MASK);
+    outl( 0, GT_CPU_INT3_MASK);
+    outl(0, GT_GPP_Interrupt_Mask);
+    outl( 0, GT_GPP_Value);
+    outl( 0, GT_GPP_Interrupt_Cause);
+#if 0
+    printk("watchdog timer 0x%x\n",inl(0xb410));
+#endif
+}
+
+static void UpdateMainIrqTbl(int irqNum)
+{
+  int i=0, j, shifted=0, found=0;
+
+#ifdef SHOW_MORE_INIT_SETTINGS
+  unsigned long val2, val1;
+
+  val2 = (MainIrqInTbl>>32) & 0xffffffff;
+  val1 = MainIrqInTbl&0xffffffff;
+  printk("irqNum %d, MainIrqInTbl 0x%x%x\n", irqNum, val2, val1); 
+  printMainIrqTbl();
+#endif
+
+  /* If entry not in table*/
+  if ( !((unsigned long long)(1LLU << irqNum) & MainIrqInTbl)) { 
+      while ( mainIrqTbl[i]!=-1) {
+        if (BSPirqPrioTable[irqNum]>BSPirqPrioTable[mainIrqTbl[i]]) {
+          /* all other lower priority entries shifted right */
+          for (j=MainIrqTblPtr;j>i; j--) 
+              mainIrqTbl[j]=mainIrqTbl[j-1];
+          mainIrqTbl[i]=irqNum;
+          shifted=1;
+          break;
+       }
+       i++;
+     }
+     if (!shifted) mainIrqTbl[MainIrqTblPtr]=irqNum;
+     MainIrqInTbl |= (unsigned long long)(1LLU << irqNum);
+     MainIrqTblPtr++;
+  }
+}
+
+static void CleanMainIrqTbl(int irqNum)
+{
+  int i, j;
+
+  if (((1LLU << irqNum) & MainIrqInTbl)) { /* If entry in table*/
+     for (i=0; i<64; i++) {
+       if (mainIrqTbl[i]==irqNum) {/*remove it from the entry */
+          /* all other lower priority entries shifted left */
+          for (j=i;j<MainIrqTblPtr; j++) 
+              mainIrqTbl[j]=mainIrqTbl[j+1];
+          MainIrqInTbl &= ~(1LLU << irqNum);
+          MainIrqTblPtr--;
+          break;
+       }
+     }
+  }
+}
+
+/***************************************************************************
+*
+* BSP_enable_main_irq enables the corresponding bit in the low or high
+* "main cause cpu int mask register".  
+*
+*/
+void BSP_enable_main_irq(const rtems_irq_symbolic_name irqNum) 
+{
+  unsigned bitNum, mask;
+  unsigned int level;
+
+  bitNum = ((int)irqNum) - BSP_MICL_IRQ_LOWEST_OFFSET;
+
+  _CPU_ISR_Disable(level); 
+
+#if DynamicIrqTbl 
+  UpdateMainIrqTbl((int) irqNum);
+#endif       
+  if (bitNum <32) {
+     GT_MAINirqLO_cache |= (1 << bitNum);
+     outl(GT_MAINirqLO_cache, GT_CPU_INT_MASK_LO);
+  }
+  else {
+     bitNum-=32;
+     GT_MAINirqHI_cache |= (1 << bitNum);
+     outl(GT_MAINirqHI_cache, GT_CPU_INT_MASK_HI);
+  }
+  _CPU_ISR_Enable (level);
+}
+
+/***************************************************************************
+*
+* BSP_disable_main_irq disables the corresponding bit in the low or high
+* main cause cpu int mask register. 
+*
+*/
+void BSP_disable_main_irq(const rtems_irq_symbolic_name irqNum) 
+{
+  unsigned bitNum;
+  unsigned int mask, level;
+
+  bitNum = ((int)irqNum) - BSP_MICL_IRQ_LOWEST_OFFSET;
+
+  _CPU_ISR_Disable(level);
+
+#if DynamicIrqTbl 
+  CleanMainIrqTbl((int) irqNum);
+#endif
+  if (bitNum <32) {
+     GT_MAINirqLO_cache &= ~(1 << bitNum);
+     outl(GT_MAINirqLO_cache, GT_CPU_INT_MASK_LO);
+  }
+  else	{
+     bitNum-=32;
+     GT_MAINirqHI_cache &= ~(1 << bitNum);
+     outl(GT_MAINirqHI_cache, GT_CPU_INT_MASK_HI);
+  }
+  _CPU_ISR_Enable (level);
+}
+
+/******************************************************************************
+*
+* BSP_enable_gpp_irq enables the corresponding bit in the GPP interrupt
+* mask register.  The interrupt level is numerically equivalent to the
+* corresponding interrupt vector.
+*
+*/
+void BSP_enable_gpp_irq(const rtems_irq_symbolic_name irqNum) 
+{
+  unsigned bitNum;
+  unsigned int mask, level;
+  int group, bit;
+
+  bitNum = ((int)irqNum) - BSP_GPP_IRQ_LOWEST_OFFSET;
+
+  _CPU_ISR_Disable(level);
+
+#if DynamicIrqTbl 
+  group = bitNum/8;
+  if ( !GPPinMainIrqTbl[group])  /* avoid duplicated entry */
+     UpdateMainIrqTbl(BSP_MAIN_GPP7_0_IRQ+group);
+  bit = bitNum%8;
+  GPPinMainIrqTbl[group] |= (1<<bit);
+#endif
+ 
+  mask = 1 << bitNum;
+  GT_GPPirq_cache |= mask;
+  outl(GT_GPPirq_cache, GT_GPP_Interrupt_Mask);
+#ifdef SHOW_MORE_INIT_SETTINGS
+  printk("enable irqNum %d, bitnum %d \n", irqNum, bitNum);
+  printk("GPP mask %d \n", inl(GT_GPP_Interrupt_Mask)); 
+#endif
+
+  _CPU_ISR_Enable (level);
+}
+
+/******************************************************************************
+*
+* BSP_disable_gpp_irq disables the corresponding bit in the General Purpose
+* Port Interrupt.  The interrupt level is numerically equivalent to the
+* corresponding interrupt vector.
+*
+*/
+void BSP_disable_gpp_irq(const rtems_irq_symbolic_name irqNum) 
+{
+  unsigned bitNum;
+  unsigned int mask, level;
+  int group, bit;
+
+  bitNum = ((int)irqNum) - BSP_GPP_IRQ_LOWEST_OFFSET;
+
+  _CPU_ISR_Disable(level);
+#if DynamicIrqTbl 
+  group = bitNum/8;
+  bit = bitNum%8;
+  GPPinMainIrqTbl[group] &= ~(1<<bit);
+  if ( !GPPinMainIrqTbl[group])/* If it's really the last one */
+     CleanMainIrqTbl(BSP_MAIN_GPP7_0_IRQ+group);
+#endif
+#ifdef SHOW_MORE_INIT_SETTINGS
+  printk("disable irqNum %d, bitnum %d \n", irqNum, bitNum);
+#endif
+  mask = ~ (1 << bitNum);
+  GT_GPPirq_cache &= mask;
+  outl(GT_GPPirq_cache, GT_GPP_Interrupt_Mask);
+  _CPU_ISR_Enable (level);
+}
+
+/* Only print ten entries for now */
+void BSP_printMainIrqTbl()
+{
+  int i;
+
+  printk("mainIrqTbl[10]={");
+  for (i=0; i<10; i++)
+    printk("%d,", mainIrqTbl[i]);
+  printk("}\n");
+  printk("GPPinMainIrqTbl 0x%x 0x%x 0x%x 0x%x\n",
+	 GPPinMainIrqTbl[0], GPPinMainIrqTbl[1],
+	 GPPinMainIrqTbl[2], GPPinMainIrqTbl[3]);
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/irq/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/irq/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/irq/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,43 @@
+##
+## $Id: Makefile.am  S. Kate Feng, 12/03
+##
+
+VPATH = @srcdir@:@srcdir@/../../shared/irq
+INCLUDES = -I @srcdir@/../irq
+
+C_FILES = irq_init.c GT64260Int.c irq.c
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS =  irq.h
+
+H_FILES = irq.h
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+S_FILES = irq_asm.S
+S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = irq_init.c GT64260Int.c irq.c
+
+OBJS = $(S_O_FILES) $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $<
+
+$(PROJECT_INCLUDE)/bsp/irq.h: irq.h
+	$(INSTALL_DATA) $< $@
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq.h
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/irq/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/irq/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/irq/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,594 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../../shared/irq
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+INCLUDES = -I @srcdir@/../irq
+
+C_FILES = irq_init.c GT64260Int.c irq.c
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = irq.h
+
+H_FILES = irq.h
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+S_FILES = irq_asm.S
+S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = irq_init.c GT64260Int.c irq.c
+
+OBJS = $(S_O_FILES) $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/irq.h
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = irq
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_bsp_HEADERS)
+
+DIST_COMMON = $(include_bsp_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  irq/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+include_bspHEADERS_INSTALL = $(INSTALL_HEADER)
+install-include_bspHEADERS: $(include_bsp_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f"; \
+	  $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+uninstall-include_bspHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(include_bspdir)/$$f"; \
+	  rm -f $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-include_bspHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-include_bspHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic clean-local ctags distclean distclean-generic \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-include_bspHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-include_bspHEADERS uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $<
+
+$(PROJECT_INCLUDE)/bsp/irq.h: irq.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/irq/irq.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/irq/irq.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/irq/irq.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,544 @@
+/*  irq.c
+ *
+ *  This file contains the implementation of the function described in irq.h
+ *
+ *  Copyright (C) 1998, 1999 valette@crf.canon.fr
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  Special acknowledgement to Till Straumann <strauman@slac.stanford.edu>
+ *  for providing inputs to the IRQ handling and optimization.
+ *
+ *  Modified and added support for the MVME5500 board
+ *  Copyright 2003, 2004, Shuchen Kate Feng <feng1@bnl.gov>,
+ *                  NSLS,Brookhaven National Laboratory
+ *
+ */
+  
+#include <rtems/system.h>
+#include <bsp.h>
+#include <bsp/irq.h>
+#include <rtems/score/thread.h>
+#include <rtems/score/apiext.h>
+#include <libcpu/raw_exception.h>
+#include <libcpu/io.h>
+#include <bsp/vectors.h>
+
+#include <rtems/bspIo.h> /* for printk */
+#include "bsp/gtreg.h"
+
+#define HI_INT_CAUSE 0x40000000
+
+/*#define DEBUG*/
+
+int gpp_int_error =0;
+
+/*
+ * pointer to the mask representing the additionnal irq vectors
+ * that must be disabled when a particular entry is activated.
+ * They will be dynamically computed from teh prioruty table given
+ * in BSP_rtems_irq_mngt_set();
+ * CAUTION : this table is accessed directly by interrupt routine
+ * 	     prologue.
+ */
+static unsigned int irq_prio_maskLO_tbl[BSP_MAIN_IRQ_NUMBER];
+static unsigned int irq_prio_maskHI_tbl[BSP_MAIN_IRQ_NUMBER];
+
+/*
+ * default handler connected on each irq after bsp initialization
+ */
+static rtems_irq_connect_data	default_rtems_entry;
+
+/*
+ * location used to store initial tables used for interrupt
+ * management.
+ */
+static rtems_irq_global_settings* 	internal_config;
+static rtems_irq_connect_data*		rtems_hdl_tbl;
+
+static unsigned int irqCAUSE[20], irqLOW[20], irqHIGH[20];
+static int irqIndex=0;
+
+/*
+ * Check if IRQ is a MAIN CPU internal IRQ 
+ */
+static inline int is_main_irq(const rtems_irq_symbolic_name irqLine)
+{
+  return (((int) irqLine <= BSP_MICH_IRQ_MAX_OFFSET) &
+	  ((int) irqLine >= BSP_MICL_IRQ_LOWEST_OFFSET)
+	 );
+}
+
+/*
+ * Check if IRQ is a GPP IRQ
+ */
+static inline int is_gpp_irq(const rtems_irq_symbolic_name irqLine)
+{
+  return (((int) irqLine <= BSP_GPP_IRQ_MAX_OFFSET) &
+	  ((int) irqLine >= BSP_GPP_IRQ_LOWEST_OFFSET)
+	 );
+}
+
+/*
+ * Check if IRQ is a Porcessor IRQ
+ */
+static inline int is_processor_irq(const rtems_irq_symbolic_name irqLine)
+{
+  return (((int) irqLine <= BSP_PROCESSOR_IRQ_MAX_OFFSET) &
+	  ((int) irqLine >= BSP_PROCESSOR_IRQ_LOWEST_OFFSET)
+	 );
+}
+
+#define GT_GPP_Int1_Cause GT_GPP_Interrupt_Cause+1
+#define GT_GPP_Int2_Cause GT_GPP_Interrupt_Cause+2
+#define GT_GPP_Int3_Cause GT_GPP_Interrupt_Cause+3
+
+void GT_GPP_IntHandler0()
+{
+
+  unsigned  gppCause, irqNum, bitNum;
+  int i, found=0;
+
+  gppCause = inb(GT_GPP_Interrupt_Cause) & GT_GPPirq_cache;
+
+  for (i=0; GPP7_0IrqTbl[i]!=-1;i++){
+    bitNum =GPP7_0IrqTbl[i];
+    if (gppCause & (1<<bitNum)) {
+        /* Clear the GPP interrupt cause bit */
+      outb( ~(1<<bitNum), GT_GPP_Interrupt_Cause);/* Till Straumann */
+        found = 1; 
+        irqNum = bitNum+BSP_GPP_IRQ_LOWEST_OFFSET;
+        /* call the necessary interrupt handlers */
+        if (rtems_hdl_tbl[irqNum].hdl != default_rtems_entry.hdl)
+	   rtems_hdl_tbl[irqNum].hdl();
+        else
+	   gpp_int_error= bitNum; /*GPP interrupt bitNum not connected */
+    }
+  }
+  if ( !found) gpp_int_error = 33; /* spurious GPP interrupt  */
+}
+
+void GT_GPP_IntHandler1()
+{
+  unsigned  gppCause, irqNum, bitNum;
+  int i, found=0;
+
+  gppCause = inb(GT_GPP_Int1_Cause) & (GT_GPPirq_cache>>8);
+
+  for (i=0; GPP15_8IrqTbl[i]!=-1;i++){
+    bitNum =GPP15_8IrqTbl[i];
+    if (gppCause & (1<<bitNum)) {
+        /* Clear the GPP interrupt cause bit */
+        outb( ~(1<<bitNum), GT_GPP_Int1_Cause); /* Till Straumann */
+        found = 1; 
+        irqNum = bitNum+BSP_GPP8_IRQ_OFFSET;
+        /* call the necessary interrupt handlers */
+        if (rtems_hdl_tbl[irqNum].hdl != default_rtems_entry.hdl)
+	   rtems_hdl_tbl[irqNum].hdl();
+        else
+	   gpp_int_error= bitNum+8; /*GPP interrupt bitNum not connected */
+    }
+  }
+  if ( !found) gpp_int_error = 33; /* spurious GPP interrupt  */
+}
+void GT_GPP_IntHandler2()
+{
+  unsigned  gppCause, irqNum, bitNum;
+  int i, found=0;
+
+  gppCause = inb(GT_GPP_Int2_Cause) & (GT_GPPirq_cache>>16);
+
+  for (i=0; GPP23_16IrqTbl[i]!=-1;i++){
+    bitNum =GPP23_16IrqTbl[i];
+    if (gppCause & (1<<bitNum)) {
+        /* Clear the GPP interrupt cause bit */
+        outb( ~(1<<bitNum), GT_GPP_Int2_Cause);
+        found = 1; 
+        irqNum = bitNum+BSP_GPP16_IRQ_OFFSET;
+        /* call the necessary interrupt handlers */
+        if (rtems_hdl_tbl[irqNum].hdl != default_rtems_entry.hdl)
+	    rtems_hdl_tbl[irqNum].hdl();
+        else
+	   gpp_int_error= bitNum+16; /*GPP interrupt bitNum not connected */
+    }
+  }
+  if ( !found) gpp_int_error = 33; /* spurious GPP interrupt  */
+}
+
+void GT_GPP_IntHandler3()
+{
+  unsigned  gppCause, irqNum, bitNum;
+  int i, found=0;
+
+  gppCause = inb(GT_GPP_Int3_Cause) & (GT_GPPirq_cache>>24);
+
+  for (i=0; GPP31_24IrqTbl[i]!=-1;i++){
+    bitNum=GPP31_24IrqTbl[i];
+    if (gppCause & (1<<bitNum)) {
+        /* Clear the GPP interrupt cause bit */
+        outb(~(1<<bitNum), GT_GPP_Int3_Cause);
+        found = 1; 
+        irqNum = bitNum+BSP_GPP24_IRQ_OFFSET;
+        /* call the necessary interrupt handlers */
+        if (rtems_hdl_tbl[irqNum].hdl != default_rtems_entry.hdl)
+	    rtems_hdl_tbl[irqNum].hdl();
+        else
+	   gpp_int_error= bitNum+24; /*GPP interrupt bitNum not connected */
+    }
+  }
+  if ( !found) gpp_int_error = 33; /* spurious GPP interrupt  */
+}
+
+/*
+ * ------------------------ RTEMS Irq helper functions ----------------
+ */
+ 
+/*
+ * Caution : this function assumes the variable "internal_config"
+ * is already set and that the tables it contains are still valid
+ * and accessible.
+ */
+static void compute_GT64260int_masks_from_prio ()
+{
+  int i,j;
+  unsigned long long irq_prio_mask=0;
+
+  /*
+   * Always mask at least current interrupt to prevent re-entrance
+   */
+  for (i=0; i <BSP_MAIN_IRQ_NUMBER; i++) {
+    irq_prio_mask = (unsigned long long) (1LLU << i);
+    for (j = 0; j <BSP_MAIN_IRQ_NUMBER; j++) {
+      /*
+       * Mask interrupts at GT64260int level that have a lower priority
+       * or <Till Straumann> a equal priority. 
+       */
+      if (internal_config->irqPrioTbl [i] >= internal_config->irqPrioTbl [j]) {
+	 irq_prio_mask |= (unsigned long long)(1LLU << j);
+      }
+    }
+
+    irq_prio_maskLO_tbl[i] = irq_prio_mask & 0xffffffff;
+    irq_prio_maskHI_tbl[i] = (irq_prio_mask>>32) & 0xffffffff;
+#ifdef DEBUG
+    printk("irq_mask_prio_tbl[%d]:0x%8x%8x\n",i,irq_prio_maskHI_tbl[i],
+	   irq_prio_maskLO_tbl[i]);
+#endif  
+  }
+}
+
+/*
+ * This function check that the value given for the irq line
+ * is valid.
+ */
+
+static int isValidInterrupt(int irq)
+{
+  if ( (irq < BSP_LOWEST_OFFSET) || (irq > BSP_MAX_OFFSET))
+    return 0;
+  return 1;
+}
+
+/*
+ * ------------------------ RTEMS Single Irq Handler Mngt Routines ----------------
+ */
+
+int BSP_install_rtems_irq_handler  (const rtems_irq_connect_data* irq)
+{
+    unsigned int level;
+  
+    if (!isValidInterrupt(irq->name)) {
+      printk("Invalid interrupt vector %d\n",irq->name);
+      return 0;
+    }
+    /*
+     * Check if default handler is actually connected. If not issue an error.
+     * You must first get the current handler via i386_get_current_idt_entry
+     * and then disconnect it using i386_delete_idt_entry.
+     * RATIONALE : to always have the same transition by forcing the user
+     * to get the previous handler before accepting to disconnect.
+     */
+    _CPU_ISR_Disable(level);
+    if (rtems_hdl_tbl[irq->name].hdl != default_rtems_entry.hdl) {
+      _CPU_ISR_Enable(level);
+      printk("IRQ vector %d already connected\n",irq->name);
+      return 0;
+    }
+
+    /*
+     * store the data provided by user
+     */
+    rtems_hdl_tbl[irq->name] = *irq;
+    rtems_hdl_tbl[irq->name].next_handler = (void *)-1;
+
+    if (is_main_irq(irq->name)) {
+      /*
+       * Enable (internal ) Main Interrupt Cause Low and High
+       */
+#ifdef DEBUG_IRQ
+      printk("main irq %d\n",irq->name);
+#endif
+      BSP_enable_main_irq(irq->name);
+    }
+    
+    if (is_gpp_irq(irq->name)) {
+      /*
+       * Enable (external) GPP[x] interrupt 
+       */
+      BSP_enable_gpp_irq((int) irq->name);
+    }
+
+    if (is_processor_irq(irq->name)) {
+      /*
+       * Enable exception at processor level
+       */
+    }
+    /*
+     * Enable interrupt on device
+     
+    irq->on(irq);*/
+    
+    _CPU_ISR_Enable(level);
+
+    return 1;
+}
+
+
+int BSP_get_current_rtems_irq_handler	(rtems_irq_connect_data* irq)
+{
+     if (!isValidInterrupt(irq->name)) {
+      return 0;
+     }
+     *irq = rtems_hdl_tbl[irq->name];
+     return 1;
+}
+
+int BSP_remove_rtems_irq_handler  (const rtems_irq_connect_data* irq)
+{
+    unsigned int level;
+  
+    if (!isValidInterrupt(irq->name)) {
+      return 0;
+    }
+    /*
+     * Check if default handler is actually connected. If not issue an error.
+     * You must first get the current handler via i386_get_current_idt_entry
+     * and then disconnect it using i386_delete_idt_entry.
+     * RATIONALE : to always have the same transition by forcing the user
+     * to get the previous handler before accepting to disconnect.
+     */
+    if (rtems_hdl_tbl[irq->name].hdl != irq->hdl) {
+      return 0;
+    }
+    _CPU_ISR_Disable(level);
+
+    if (is_main_irq(irq->name)) {
+      /*
+       * disable CPU main interrupt
+       */
+      BSP_disable_main_irq(irq->name);
+    }
+    if (is_gpp_irq(irq->name)) {
+      /*
+       * disable external interrupt
+       */
+      BSP_disable_gpp_irq(irq->name);
+    }
+    if (is_processor_irq(irq->name)) {
+      /*
+       * disable exception at processor level
+       */
+    }    
+
+    /*
+     * Disable interrupt on device
+     */
+    irq->off(irq);
+
+    /*
+     * restore the default irq value
+     */
+    rtems_hdl_tbl[irq->name] = default_rtems_entry;
+
+    _CPU_ISR_Enable(level);
+
+    return 1;
+}
+
+/*
+ * ------------------------ RTEMS Global Irq Handler Mngt Routines ----------------
+ */
+
+int BSP_rtems_irq_mngt_set(rtems_irq_global_settings* config)
+{
+    int i;
+    unsigned int level;
+   /*
+    * Store various code accelerators
+    */
+    internal_config 		= config;
+    default_rtems_entry 	= config->defaultEntry;
+    rtems_hdl_tbl 		= config->irqHdlTbl;
+
+    _CPU_ISR_Disable(level);
+    compute_GT64260int_masks_from_prio();
+
+    /*
+     * set up internal tables used by rtems interrupt prologue
+     */
+    /*
+     * start with MAIN CPU IRQ
+     */
+    for (i=BSP_MICL_IRQ_LOWEST_OFFSET; i < BSP_GPP_IRQ_LOWEST_OFFSET ; i++) {
+      if (rtems_hdl_tbl[i].hdl != default_rtems_entry.hdl) {
+	BSP_enable_main_irq(i);
+	rtems_hdl_tbl[i].on(&rtems_hdl_tbl[i]);
+      }
+      else {
+	rtems_hdl_tbl[i].off(&rtems_hdl_tbl[i]);
+	BSP_disable_main_irq(i);
+      }
+    }
+    /*
+     * continue with  external IRQ
+     */
+    for (i=BSP_GPP_IRQ_LOWEST_OFFSET; i<BSP_PROCESSOR_IRQ_LOWEST_OFFSET; i++) {
+      if (rtems_hdl_tbl[i].hdl != default_rtems_entry.hdl) {
+	BSP_enable_gpp_irq(i);
+	rtems_hdl_tbl[i].on(&rtems_hdl_tbl[i]);
+      }
+      else {
+	rtems_hdl_tbl[i].off(&rtems_hdl_tbl[i]);
+	BSP_disable_gpp_irq(i);
+      }
+    }
+
+    /*
+     * finish with Processor exceptions handled like IRQ
+     */
+    for (i=BSP_PROCESSOR_IRQ_LOWEST_OFFSET; i < BSP_PROCESSOR_IRQ_MAX_OFFSET+1; i++) {
+      if (rtems_hdl_tbl[i].hdl != default_rtems_entry.hdl) {
+	rtems_hdl_tbl[i].on(&rtems_hdl_tbl[i]);
+      }
+      else {
+	rtems_hdl_tbl[i].off(&rtems_hdl_tbl[i]);
+      }
+    }
+    _CPU_ISR_Enable(level);
+    return 1;
+}
+
+int BSP_rtems_irq_mngt_get(rtems_irq_global_settings** config)
+{
+    *config = internal_config;
+    return 0;
+}    
+
+int _BSP_vme_bridge_irq = -1;
+
+/*
+ * High level IRQ handler called from shared_raw_irq_code_entry
+ */
+void C_dispatch_irq_handler (CPU_Interrupt_frame *frame, unsigned int excNum)
+{
+  register unsigned msr;
+  register unsigned new_msr;
+  register unsigned mainCause[2], selectCause;
+  register unsigned oldMask[2]={0,0};
+  unsigned i, regNum, irq, bitNum, startIrqNum=0;
+
+  if (excNum == ASM_DEC_VECTOR) {
+    _CPU_MSR_GET(msr);
+    new_msr = msr | MSR_EE;
+    _CPU_MSR_SET(new_msr);
+    
+    rtems_hdl_tbl[BSP_DECREMENTER].hdl();
+
+    _CPU_MSR_SET(msr);
+    return;
+    
+  }
+  selectCause = inl( GT_CPU_SEL_CAUSE); 
+  if (selectCause & HI_INT_CAUSE ) {
+    mainCause[1]= selectCause & inl(GT_CPU_INT_MASK_HI);
+    startIrqNum=32;
+  }
+  else {
+    mainCause[0] =inl(GT_MAIN_INT_CAUSE_LO)&inl(GT_CPU_INT_MASK_LO);
+    mainCause[1] =inl(GT_MAIN_INT_CAUSE_HI)&inl(GT_CPU_INT_MASK_HI);
+  }
+
+#if 0
+  /* very bad practice to put printk here, use only if for debug */
+  printk("main 0 %x, main 1 %x \n", mainCause[0],mainCause[1]);
+#endif
+  oldMask[0]= GT_MAINirqLO_cache;
+  oldMask[1]= GT_MAINirqHI_cache;
+
+  for (i=0;mainIrqTbl[i]!=-1;i++) {
+    irq=mainIrqTbl[i];
+    if ( irq < startIrqNum ) continue;
+    regNum = irq/32;
+    bitNum = irq % 32;
+    if ( mainCause[regNum] & (1<<bitNum)) {
+      GT_MAINirqLO_cache=oldMask[0]&(~irq_prio_maskLO_tbl[irq]);
+      outl(GT_MAINirqLO_cache, GT_CPU_INT_MASK_LO);
+      __asm __volatile("sync");
+      GT_MAINirqHI_cache=oldMask[1]&(~irq_prio_maskHI_tbl[irq]);
+      outl(GT_MAINirqHI_cache, GT_CPU_INT_MASK_HI);
+      __asm __volatile("sync");
+
+      /* <skf> It seems that reading back is necessary to ensure the 
+       * interrupt mask updated. Otherwise, spurious interrupt will
+       * happen.  However, I do not want to use "while loop" to risk 
+       * the CPU stuck.  I wound rather keep track of the interrupt
+       * mask if not updated.
+       */
+      if (((irqLOW[irqIndex]= inl(GT_CPU_INT_MASK_LO))!=GT_MAINirqLO_cache)||
+          ((irqHIGH[irqIndex]= inl(GT_CPU_INT_MASK_HI))!=GT_MAINirqHI_cache)){
+         irqIndex++;
+         irqIndex %=20;
+         irqCAUSE[irqIndex] = irq;
+      }
+      _CPU_MSR_GET(msr);
+      new_msr = msr | MSR_EE;
+      _CPU_MSR_SET(new_msr);
+      rtems_hdl_tbl[irq].hdl();
+      _CPU_MSR_SET(msr);
+      break;
+    }
+  }
+  GT_MAINirqLO_cache=oldMask[0];
+  outl(GT_MAINirqLO_cache, GT_CPU_INT_MASK_LO);
+  GT_MAINirqHI_cache=oldMask[1];
+  outl(GT_MAINirqHI_cache, GT_CPU_INT_MASK_HI);
+}
+
+void _ThreadProcessSignalsFromIrq (BSP_Exception_frame* ctx)
+{
+  /*
+   * Process pending signals that have not already been
+   * processed by _Thread_Displatch. This happens quite
+   * unfrequently : the ISR must have posted an action
+   * to the current running thread.
+   */
+  if ( _Thread_Do_post_task_switch_extension ||
+       _Thread_Executing->do_post_task_switch_extension ) {
+    _Thread_Executing->do_post_task_switch_extension = FALSE;
+    _API_extensions_Run_postswitch();
+  }
+  /*
+   * I plan to process other thread related events here.
+   * This will include DEBUG session requested from keyboard...
+   */
+}
+
+void BSP_printIRQMask()
+{
+  int i;
+
+  for (i=0; i< 20; i++)
+    printk("IRQ%d : 0x%x %x \n", irqCAUSE[i], irqHIGH[i],irqLOW[i]);
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/irq/irq.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/irq/irq.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/irq/irq.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,331 @@
+/* irq.h
+ *
+ *  This include file describe the data structure and the functions implemented
+ *  by rtems to write interrupt handlers.
+ *
+ *  CopyRight (C) 1999 valette@crf.canon.fr
+ *
+ *  This code is heavilly inspired by the public specification of STREAM V2
+ *  that can be found at :
+ *
+ *      <http://www.chorus.com/Documentation/index.html> by following
+ *  the STREAM API Specification Document link.
+ *
+ *  The license and distribution terms for this file may be
+ *  found in found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ * Copyright 2004, Brookhaven National Laboratory and
+ *                 Shuchen Kate Feng <feng1@bnl.gov> 
+ *
+ *    - modified shared/irq/irq.h for Mvme5500 (no ISA devices/PIC)
+ *    - Discovery GT64260 interrupt controller instead of 8259.
+ *    - Added support for software IRQ priority levels. 
+ */
+
+#ifndef LIBBSP_POWERPC_MVME5500_IRQ_IRQ_H
+#define LIBBSP_POWERPC_MVME5500_IRQ_IRQ_H
+
+
+#define BSP_ASM_IRQ_VECTOR_BASE 0x0
+
+#ifndef ASM
+
+#define DynamicIrqTbl 1
+
+/*
+ * Symbolic IRQ names and related definitions.
+ */
+
+/* leave the ISA symbols in there, so we can reuse shared/irq.c
+ * Also, we start numbering PCI irqs at 16 because the OPENPIC
+ * driver relies on this when mapping irq number <-> vectors
+ * (OPENPIC_VEC_SOURCE in openpic.h)
+ */
+
+typedef enum {
+  /* See section 25.2 , Table 734 of GT64260 controller 
+   * Main Interrupt Cause Low register
+   */
+  BSP_MICL_IRQ_NUMBER           = 32,
+  BSP_MICL_IRQ_LOWEST_OFFSET    =  0,
+  BSP_MICL_IRQ_MAX_OFFSET       =  BSP_MICL_IRQ_LOWEST_OFFSET + BSP_MICL_IRQ_NUMBER -1,
+  /* 
+   * Main Interrupt Cause High register
+   */
+  BSP_MICH_IRQ_NUMBER           = 32,
+  BSP_MICH_IRQ_LOWEST_OFFSET    = BSP_MICL_IRQ_MAX_OFFSET+1,
+  BSP_MICH_IRQ_MAX_OFFSET       = BSP_MICH_IRQ_LOWEST_OFFSET + BSP_MICH_IRQ_NUMBER -1,
+  /* External GPP Interrupt assignements
+   */
+  BSP_GPP_IRQ_NUMBER		=  32,
+  BSP_GPP_IRQ_LOWEST_OFFSET	=  BSP_MICH_IRQ_MAX_OFFSET+1, 
+  BSP_GPP_IRQ_MAX_OFFSET	=  BSP_GPP_IRQ_LOWEST_OFFSET + BSP_GPP_IRQ_NUMBER - 1,
+
+  /*
+   * PowerPc exceptions handled as interrupt where a rtems managed interrupt
+   * handler might be connected
+   */
+  BSP_PROCESSOR_IRQ_NUMBER	=   1,
+  BSP_PROCESSOR_IRQ_LOWEST_OFFSET = BSP_GPP_IRQ_MAX_OFFSET + 1,
+  BSP_PROCESSOR_IRQ_MAX_OFFSET	=   BSP_PROCESSOR_IRQ_LOWEST_OFFSET + BSP_PROCESSOR_IRQ_NUMBER - 1,
+
+  /* allow a couple of vectors for VME and counter/timer irq sources etc.
+   * This is probably not needed any more. 
+   */
+  BSP_MISC_IRQ_NUMBER		=   30,
+  BSP_MISC_IRQ_LOWEST_OFFSET	=   BSP_PROCESSOR_IRQ_MAX_OFFSET + 1,
+  BSP_MISC_IRQ_MAX_OFFSET	=   BSP_MISC_IRQ_LOWEST_OFFSET + BSP_MISC_IRQ_NUMBER - 1,
+
+#if 0
+  /*
+   * ISA IRQ handler related definitions
+   */
+  /* MVME5500 ISA local resources exist only if an IPMC 712/761 module
+   * is mounted.
+   */
+  BSP_ISA_IRQ_NUMBER    	= 0, 
+  BSP_ISA_IRQ_LOWEST_OFFSET	= BSP_MISC_IRQ_MAX_OFFSET+1,
+  BSP_ISA_IRQ_MAX_OFFSET	= BSP_ISA_IRQ_LOWEST_OFFSET + BSP_ISA_IRQ_NUMBER - 1,
+
+#endif
+
+  /*
+   * Summary
+   */
+  BSP_IRQ_NUMBER		= BSP_MISC_IRQ_MAX_OFFSET + 1,
+  BSP_MAIN_IRQ_NUMBER           = 64,
+  BSP_LOWEST_OFFSET		= BSP_MICL_IRQ_LOWEST_OFFSET,
+  BSP_MAX_OFFSET		= BSP_MISC_IRQ_MAX_OFFSET,
+
+  /* Main CPU interrupt cause (Low) */
+  BSP_MAIN_TIMER0_1_IRQ         = BSP_MICL_IRQ_LOWEST_OFFSET+8,
+  BSP_MAIN_PCI0_7_0             = BSP_MICL_IRQ_LOWEST_OFFSET+12,
+  BSP_MAIN_PCI0_15_8            = BSP_MICL_IRQ_LOWEST_OFFSET+13,
+  BSP_MAIN_PCI0_23_16           = BSP_MICL_IRQ_LOWEST_OFFSET+14,
+  BSP_MAIN_PCI0_31_24           = BSP_MICL_IRQ_LOWEST_OFFSET+15,
+  BSP_MAIN_PCI1_7_0             = BSP_MICL_IRQ_LOWEST_OFFSET+16,
+  BSP_MAIN_PCI1_15_8            = BSP_MICL_IRQ_LOWEST_OFFSET+18,
+  BSP_MAIN_PCI1_23_16           = BSP_MICL_IRQ_LOWEST_OFFSET+19,
+  BSP_MAIN_PCI1_31_24           = BSP_MICL_IRQ_LOWEST_OFFSET+20,
+
+
+  /* Main CPU interrupt cause (High) */
+  BSP_MAIN_ETH0_IRQ             = BSP_MICH_IRQ_LOWEST_OFFSET,
+  BSP_MAIN_ETH1_IRQ             = BSP_MICH_IRQ_LOWEST_OFFSET+1,
+  BSP_MAIN_ETH2_IRQ             = BSP_MICH_IRQ_LOWEST_OFFSET+2,
+  BSP_MAIN_GPP7_0_IRQ           = BSP_MICH_IRQ_LOWEST_OFFSET+24,
+  BSP_MAIN_GPP15_8_IRQ          = BSP_MICH_IRQ_LOWEST_OFFSET+25,
+  BSP_MAIN_GPP23_16_IRQ         = BSP_MICH_IRQ_LOWEST_OFFSET+26,
+  BSP_MAIN_GPP31_24_IRQ         = BSP_MICH_IRQ_LOWEST_OFFSET+27,
+
+  /* on the MVME5500, these are the GT64260B external GPP0 interrupt */
+  BSP_ISA_UART_COM2_IRQ		= BSP_GPP_IRQ_LOWEST_OFFSET,
+  BSP_ISA_UART_COM1_IRQ		= BSP_GPP_IRQ_LOWEST_OFFSET,
+  BSP_GPP8_IRQ_OFFSET           = BSP_GPP_IRQ_LOWEST_OFFSET+8,
+  BSP_GPP16_IRQ_OFFSET          = BSP_GPP_IRQ_LOWEST_OFFSET+16,
+  BSP_GPP24_IRQ_OFFSET          = BSP_GPP_IRQ_LOWEST_OFFSET+24,
+  BSP_GPP_VME_VLINT0            = BSP_GPP_IRQ_LOWEST_OFFSET+12,
+  BSP_GPP_VME_VLINT1            = BSP_GPP_IRQ_LOWEST_OFFSET+13,
+  BSP_GPP_VME_VLINT2            = BSP_GPP_IRQ_LOWEST_OFFSET+14,
+  BSP_GPP_VME_VLINT3            = BSP_GPP_IRQ_LOWEST_OFFSET+15,
+  BSP_GPP_PMC2_INTA             = BSP_GPP_IRQ_LOWEST_OFFSET+16,
+  BSP_GPP_82544_IRQ             = BSP_GPP_IRQ_LOWEST_OFFSET+20,
+  BSP_GPP_WDT_NMI_IRQ           = BSP_GPP_IRQ_LOWEST_OFFSET+24,
+  BSP_GPP_WDT_EXP_IRQ           = BSP_GPP_IRQ_LOWEST_OFFSET+25,
+
+ /*
+   * Some Processor execption handled as rtems IRQ symbolic name definition
+   */
+  BSP_DECREMENTER		=	BSP_PROCESSOR_IRQ_LOWEST_OFFSET
+}rtems_irq_symbolic_name;
+
+/*
+ * Type definition for RTEMS managed interrupts
+ */
+typedef unsigned char  rtems_irq_prio;
+
+typedef unsigned int rtems_GTirq_masks;
+
+extern rtems_GTirq_masks GT_GPPirq_cache;
+extern rtems_GTirq_masks GT_MAINirqLO_cache, GT_MAINirqHI_cache;
+
+struct 	__rtems_irq_connect_data__;	/* forward declaratiuon */
+
+typedef void (*rtems_irq_hdl)		(void);
+typedef void (*rtems_irq_ack)		(void);
+typedef void (*rtems_irq_enable)	(const struct __rtems_irq_connect_data__*);
+typedef void (*rtems_irq_disable)	(const struct __rtems_irq_connect_data__*);
+typedef int  (*rtems_irq_is_enabled)	(const struct __rtems_irq_connect_data__*);
+
+typedef struct __rtems_irq_connect_data__ {
+      /*
+       * IRQ line
+       */
+      rtems_irq_symbolic_name 	name;
+      /*
+       * handler. See comment on handler properties below in function prototype.
+       */
+      rtems_irq_hdl	   	hdl;
+      /*
+       * function for enabling interrupts at device level (ONLY!).
+       * The BSP code will automatically enable it at i8259s level and openpic level.
+       * RATIONALE : anyway such code has to exist in current driver code.
+       * It is usually called immediately AFTER connecting the interrupt handler.
+       * RTEMS may well need such a function when restoring normal interrupt
+       * processing after a debug session.
+       * 
+       */
+      rtems_irq_enable		on;	
+      /*
+       * function for disabling interrupts at device level (ONLY!).
+       * The code will disable it at i8259s level. RATIONALE : anyway
+       * such code has to exist for clean shutdown. It is usually called
+       * BEFORE disconnecting the interrupt. RTEMS may well need such
+       * a function when disabling normal interrupt processing for
+       * a debug session. May well be a NOP function.
+       */
+      rtems_irq_disable		off;
+      /*
+       * function enabling to know what interrupt may currently occur
+       * if someone manipulates the i8259s interrupt mask without care...
+       */
+      rtems_irq_is_enabled	isOn;
+      /*
+       *  Set to -1 for vectors forced to have only 1 handler
+       */
+      void *next_handler;
+
+}rtems_irq_connect_data;
+
+typedef struct {
+  /*
+   * size of all the table fields (*Tbl) described below.
+   */
+  unsigned int	 		irqNb;
+  /*
+   * Default handler used when disconnecting interrupts.
+   */
+  rtems_irq_connect_data	defaultEntry;
+  /*
+   * Table containing initials/current value.
+   */
+  rtems_irq_connect_data*	irqHdlTbl;
+  /*
+   * actual value of BSP_ISA_IRQ_VECTOR_BASE...
+   */
+  rtems_irq_symbolic_name	irqBase;
+  /*
+   * software priorities associated with interrupts.
+   * if irqPrio  [i]  >  intrPrio  [j]  it  means  that  
+   * interrupt handler hdl connected for interrupt name i
+   * will  not be interrupted by the handler connected for interrupt j
+   * The interrupt source  will be physically masked at i8259 level.
+   */
+    rtems_irq_prio*		irqPrioTbl;
+}rtems_irq_global_settings;
+
+/*
+ * ------------------------ RTEMS Single Irq Handler Mngt Routines ----------------
+ */
+/*
+ * function to connect a particular irq handler. This hanlder will NOT be called
+ * directly as the result of the corresponding interrupt. Instead, a RTEMS
+ * irq prologue will be called that will :
+ *
+ *	1) save the C scratch registers,
+ *	2) switch to a interrupt stack if the interrupt is not nested,
+ *	3) store the current i8259s' interrupt masks
+ *	4) modify them to disable the current interrupt at 8259 level (and may
+ *	be others depending on software priorities)
+ *	5) aknowledge the i8259s',
+ *	6) demask the processor,
+ *	7) call the application handler
+ *
+ * As a result the hdl function provided
+ *
+ *	a) can perfectly be written is C,
+ * 	b) may also well directly call the part of the RTEMS API that can be used
+ *	from interrupt level,
+ *	c) It only responsible for handling the jobs that need to be done at
+ *	the device level including (aknowledging/re-enabling the interrupt at device,
+ *	level, getting the data,...)
+ *
+ *	When returning from the function, the following will be performed by
+ *	the RTEMS irq epilogue :
+ *
+ *	1) masks the interrupts again,
+ *	2) restore the original i8259s' interrupt masks
+ *	3) switch back on the orinal stack if needed,
+ *	4) perform rescheduling when necessary,
+ *	5) restore the C scratch registers...
+ *	6) restore initial execution flow
+ * 
+ */
+int BSP_install_rtems_irq_handler   	(const rtems_irq_connect_data*);
+int BSP_install_rtems_shared_irq_handler  (const rtems_irq_connect_data*);
+
+#define BSP_SHARED_HANDLER_SUPPORT      1
+
+/*
+ * function to get the current RTEMS irq handler for ptr->name. It enables to
+ * define hanlder chain...
+ */
+int BSP_get_current_rtems_irq_handler	(rtems_irq_connect_data* ptr);
+/*
+ * function to get disconnect the RTEMS irq handler for ptr->name.
+ * This function checks that the value given is the current one for safety reason.
+ * The user can use the previous function to get it.
+ */
+int BSP_remove_rtems_irq_handler    	(const rtems_irq_connect_data*);
+
+/*
+ * ------------------------ RTEMS Global Irq Handler Mngt Routines ----------------
+ */
+/*
+ * (Re) Initialize the RTEMS interrupt management.
+ *
+ * The result of calling this function will be the same as if each individual
+ * handler (config->irqHdlTbl[i].hdl)  different from "config->defaultEntry.hdl"
+ * has been individualy connected via
+ *	BSP_install_rtems_irq_handler(&config->irqHdlTbl[i])
+ * And each handler currently equal to config->defaultEntry.hdl
+ * has been previously disconnected via
+ * 	 BSP_remove_rtems_irq_handler (&config->irqHdlTbl[i])
+ *
+ * This is to say that all information given will be used and not just
+ * only the space.
+ *
+ * CAUTION : the various table address contained in config will be used
+ *	     directly by the interrupt mangement code in order to save
+ *	     data size so they must stay valid after the call => they should
+ *	     not be modified or declared on a stack.
+ */
+
+int BSP_rtems_irq_mngt_set(rtems_irq_global_settings* config);
+/*
+ * (Re) get info on current RTEMS interrupt management.
+ */
+int BSP_rtems_irq_mngt_get(rtems_irq_global_settings**);
+
+void BSP_enable_main_irq(unsigned irqNum);
+void BSP_disable_main_irq(unsigned irqNum);
+void BSP_enable_gpp_irq(unsigned irqNum);
+void BSP_disable_gpp_irq(unsigned irqNum); 
+ 
+extern void BSP_rtems_irq_mng_init(unsigned cpuId);
+extern int gpp_int_error;
+#if  DynamicIrqTbl
+extern int MainIrqTblPtr;
+extern unsigned long long MainIrqInTbl;
+extern unsigned char GPPinMainIrqTbl[4];
+#endif
+extern unsigned int mainIrqTbl[64];
+extern unsigned int GPP7_0IrqTbl[8];
+extern unsigned int GPP15_8IrqTbl[8];
+extern unsigned int GPP23_16IrqTbl[8];
+extern unsigned int GPP31_24IrqTbl[8];
+
+#endif
+
+#endif
Index: c/src/lib/libbsp/powerpc/mvme5500/irq/irq_init.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/irq/irq_init.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/irq/irq_init.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,242 @@
+/* irq_init.c
+ *
+ * This file contains the implementation of rtems initialization
+ * related to interrupt handling.
+ *
+ * CopyRight (C) 1999 valette@crf.canon.fr
+ *
+ * Special acknowledgement to Till Straumann <strauman@slac.stanford.edu>
+ * for providing inputs to the IRQ optimization.
+ * 
+ * Modified and added support for the MVME5500.
+ * Copyright 2003, 2004, Brookhaven National Laboratory and
+ *                 Shuchen Kate Feng <feng1@bnl.gov>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.OARcorp.com/rtems/license.html.
+ * 
+ */
+#include <libcpu/io.h>
+#include <libcpu/spr.h>
+#include <bsp/irq.h>
+#include <bsp.h>
+#include <libcpu/raw_exception.h>  /* ASM_EXT_VECTOR, ASM_DEC_VECTOR ... */
+
+extern unsigned int external_exception_vector_prolog_code_size[];
+extern void external_exception_vector_prolog_code();
+extern unsigned int decrementer_exception_vector_prolog_code_size[];
+extern void decrementer_exception_vector_prolog_code();
+extern void GT_GPP_IntHandler0(), GT_GPP_IntHandler1();
+extern void GT_GPP_IntHandler2(), GT_GPP_IntHandler3();
+extern void BSP_GT64260INT_init();
+
+/*
+ * default on/off function
+ */
+static void nop_func(){}
+/*
+ * default isOn function
+ */
+static int not_connected() {return 0;}
+/*
+ * default possible isOn function
+ */
+static int connected() {return 1;}
+
+static rtems_irq_connect_data     	rtemsIrq[BSP_IRQ_NUMBER];
+static rtems_irq_global_settings     	initial_config;
+static rtems_irq_connect_data     	defaultIrq = {
+  /* vectorIdex,	 hdl		, on		, off		, isOn */
+  0, 			 nop_func	, nop_func	, nop_func	, not_connected
+};
+
+rtems_irq_prio BSPirqPrioTable[BSP_MAIN_IRQ_NUMBER]={
+  /*
+   * This table is where the developers can change the levels of priority
+   * based on the need of their applications.
+   *
+   * actual priorities for CPU MAIN interrupts 0-63:
+   *	0   means that only current interrupt is masked (lowest priority)
+   *	255 means all other interrupts are masked
+   */
+  /* CPU Main cause low interrupt */
+  /* 0-15 */
+  0, 0, 0, 0, 0, 0, 0, 0, 4/*Timer*/, 0, 0, 0, 0, 0, 0, 0,
+   /* 16-31 */
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  /* CPU Main cause high interrupt */
+  /* 32-47 */
+  1/*10/100MHZ*/, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  /* 48-63 */
+  0, 0, 0, 0, 0, 0, 0, 0, 0/*serial*/, 3/*VME*/, 2/*1GHZ*/, 5/*WD*/, 0, 0, 0, 0
+};
+
+/* The mainIrqTbl[64] lists the enabled CPU main interrupt
+ * numbers [0-63] starting from the highest priority one
+ * to the lowest priority one.
+ *
+ * The highest priority interrupt is located at mainIrqTbl[0], and 
+ * the lowest priority interrupt is located at 
+ * mainIrqTbl[MainIrqTblPtr-1].
+ */
+
+#if DynamicIrqTbl
+/* The mainIrqTbl[64] is updated dynamically based on the priority
+ * levels set at BSPirqPrioTable[64], as the BSP_enable_main_irq() and
+ * BSP_disable_main_irq() commands are invoked.
+ *
+ * Caveat: The eight GPP IRQs for each BSP_MAIN_GPPx_y_IRQ group are set
+ * at the same main priority in the BSPirqPrioTable, while the 
+ * sub-priority levels for the eight GPP in each group  are sorted 
+ * statically by developers in the GPPx_yIrqTbl[8] from the highest
+ * priority to the lowest one.
+ */
+int MainIrqTblPtr=0;
+unsigned long long MainIrqInTbl=0;
+unsigned char GPPinMainIrqTbl[4]={0,0,0,0};
+/* BitNums for Main Interrupt Lo/High Cause, -1 means invalid bit */ 
+unsigned int mainIrqTbl[BSP_MAIN_IRQ_NUMBER]={  
+                               -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1};
+#else
+/* Pre-sorted for IRQ optimization, and prioritization 
+ * The interrupts sorted are :
+
+ 1. Watchdog timer      (GPP #25)
+ 2. Timers 0-1          (Main interrupt low cause, bit 8)
+ 3. VME interrupt       (GPP #12)
+ 4. 1 GHZ ethernet      (GPP #20)
+ 5. 10/100 MHZ ethernet (Main interrupt high cause, bit 0)
+ 6. COM1/COM2           (GPP #0)
+
+*/ 
+/* BitNums for Main Interrupt Lo/High Cause, -1 means invalid bit */ 
+unsigned int mainIrqTbl[64]={ BSP_MAIN_GPP31_24_IRQ, /* 59:watchdog timer */
+			       BSP_MAIN_TIMER0_1_IRQ, /* 8:Timers 0-1 */
+			       BSP_MAIN_GPP15_8_IRQ,  /* 57:VME interrupt */
+			       BSP_MAIN_GPP23_16_IRQ, /* 58: 1 GHZ ethernet */
+			       BSP_MAIN_ETH0_IRQ,  /* 32:10/100 MHZ ethernet */
+			       BSP_MAIN_GPP7_0_IRQ, /* 56:COM1/COM2 */
+			       -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+			       -1, -1, -1, -1};
+#endif
+
+unsigned int GPP7_0IrqTbl[8]={0, /* COM1/COM2 */
+                               -1, -1, -1, -1, -1, -1, -1};
+unsigned int GPP15_8IrqTbl[8]={4, /* VME (12-8=4) */
+				-1, -1, -1, -1, -1, -1, -1};
+unsigned int GPP23_16IrqTbl[8]={4, /* 82544 1GHZ ethernet (20-16=4)*/
+				-1, -1, -1, -1, -1, -1, -1};
+unsigned int GPP31_24IrqTbl[8]={1, /* watchdog timer (25-24=1) */
+				-1, -1, -1, -1, -1, -1, -1};
+
+static int
+doit(unsigned intNum, rtems_irq_hdl handler, int (*p)(const rtems_irq_connect_data*))
+{
+	rtems_irq_connect_data d={0};
+	d.name = intNum;
+	d.isOn = connected;
+	d.hdl  = handler;
+	return p(&d);
+}
+
+int BSP_GT64260_install_isr(unsigned intNum,rtems_irq_hdl handler)
+{
+  return doit(intNum, handler, BSP_install_rtems_irq_handler);
+}
+
+/*
+ * This code assumes the exceptions management setup has already
+ * been done. We just need to replace the exceptions that will
+ * be handled like interrupt. On MPC7455 and many PPC processors
+ * this means the decrementer exception and the external exception.
+ */
+void BSP_rtems_irq_mng_init(unsigned cpuId)
+{
+  rtems_raw_except_connect_data vectorDesc;
+  int i;
+
+  /*
+   * First initialize the Interrupt management hardware
+   */
+#ifdef TRACE_IRQ_INIT  
+  printk("Initializing the interrupt controller of the GT64260\n");
+#endif       
+  BSP_GT64260INT_init();
+
+#ifdef TRACE_IRQ_INIT  
+  printk("Going to re-initialize the rtemsIrq table %d\n",BSP_IRQ_NUMBER);
+#endif       
+  /*
+   * Initialize Rtems management interrupt table
+   */
+  /*
+   * re-init the rtemsIrq table
+   */
+  for (i = 0; i < BSP_IRQ_NUMBER; i++) {
+      rtemsIrq[i]      = defaultIrq;
+      rtemsIrq[i].name = i;
+  }
+
+  /*
+   * Init initial Interrupt management config
+   */
+  initial_config.irqNb 	= BSP_IRQ_NUMBER;
+  initial_config.defaultEntry   = defaultIrq;
+  initial_config.irqHdlTbl	= rtemsIrq;
+  initial_config.irqBase	= BSP_ASM_IRQ_VECTOR_BASE;
+  initial_config.irqPrioTbl	= BSPirqPrioTable;
+
+#ifdef TRACE_IRQ_INIT  
+  printk("Going to setup irq mngt configuration\n");
+#endif       
+
+  if (!BSP_rtems_irq_mngt_set(&initial_config)) {
+      /*
+       * put something here that will show the failure...
+       */
+      BSP_panic("Unable to initialize RTEMS interrupt Management!!! System locked\n");
+  }
+
+  /* Connect the GPP int handler to each of the associated main cause bits */
+  BSP_GT64260_install_isr(BSP_MAIN_GPP7_0_IRQ, GT_GPP_IntHandler0); /* COM1 & COM2, .... */
+  BSP_GT64260_install_isr(BSP_MAIN_GPP15_8_IRQ, GT_GPP_IntHandler1);
+  BSP_GT64260_install_isr(BSP_MAIN_GPP23_16_IRQ, GT_GPP_IntHandler2);
+  BSP_GT64260_install_isr(BSP_MAIN_GPP31_24_IRQ, GT_GPP_IntHandler3);
+ 
+  /*
+   * We must connect the raw irq handler for the two
+   * expected interrupt sources : decrementer and external interrupts.
+   */
+  vectorDesc.exceptIndex 	= ASM_DEC_VECTOR;
+  vectorDesc.hdl.vector	= ASM_DEC_VECTOR;
+  vectorDesc.hdl.raw_hdl	= decrementer_exception_vector_prolog_code;
+  vectorDesc.hdl.raw_hdl_size	= (unsigned) decrementer_exception_vector_prolog_code_size;
+  vectorDesc.on		= nop_func;
+  vectorDesc.off		= nop_func;
+  vectorDesc.isOn		= connected;
+  if (!mpc60x_set_exception (&vectorDesc)) {
+      BSP_panic("Unable to initialize RTEMS decrementer raw exception\n");
+  }
+  vectorDesc.exceptIndex	= ASM_EXT_VECTOR;
+  vectorDesc.hdl.vector	= ASM_EXT_VECTOR;
+  vectorDesc.hdl.raw_hdl	= external_exception_vector_prolog_code;
+  vectorDesc.hdl.raw_hdl_size	= (unsigned) external_exception_vector_prolog_code_size;
+  if (!mpc60x_set_exception (&vectorDesc)) {
+      BSP_panic("Unable to initialize RTEMS external raw exception\n");
+    }
+#ifdef TRACE_IRQ_INIT  
+  printk("RTEMS IRQ management is now operationnal\n");
+#endif
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/network/GT64260eth.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/network/GT64260eth.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/network/GT64260eth.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,1649 @@
+/* GT64260eth.c : GT64260 10/100 Mb ethernet MAC driver
+ *
+ * Copyright (c) 2002 Allegro Networks, Inc., Wasabi Systems, Inc.
+ *
+ * Copyright (c) 2003,2004 RTEMS/Mvme5500 port by S. Kate Feng <feng1@bnl.gov>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software developed for the NetBSD Project by
+ *      Allegro Networks, Inc., and Wasabi Systems, Inc.
+ * 4. The name of Allegro Networks, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ * 5. The name of Wasabi Systems, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * S. Kate Feng, other notes in addition to porting to RTEMS :
+ * 
+ * 1) Mvme5500 uses Eth0 (controller 0) of the GT64260 to implement
+ *    the 10/100 BaseT Ethernet with PCI Master Data Byte Swap\
+ *    control.
+ * 2) It implements hardware snoop instead of software snoop
+ *    to ensure SDRAM cache coherency.
+ * 3) The origianl ISR is optimized to minimize interrupt latencies,
+ *    and to reduce system overhead. The driver's work is done by one single
+ *    task who blocks on an event while it is idle.  This implemetation
+ *    is heavily inspired by the modification of SVGM network driver for
+ *    RTEMS port written by Till Straumann, whihc is licensed under the
+ *    EPICS open source. Ditto the GT64260eth_sendpacket().
+ *
+ */
+#define BYTE_ORDER BIG_ENDIAN
+
+#ifndef KERNEL
+#define KERNEL
+#endif
+
+#define INET
+
+#include <rtems.h>
+#include <rtems/bspIo.h>	    /* printk */
+#include <stdio.h>		    /* printf for statistics */
+#include <string.h>
+
+#include <libcpu/io.h>		    /* inp & friends */
+#include <libcpu/spr.h>             /* registers.h is included here */
+#include <bsp.h>
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/mbuf.h>
+
+#include <rtems/rtems_bsdnet.h>
+#include <rtems/rtems_bsdnet_internal.h>
+#include <rtems/error.h>           
+#include <errno.h>
+
+#include <rtems/rtems/types.h>
+
+#include <sys/queue.h>
+
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <sys/sockio.h>             /* SIOCADDMULTI, SIOC...     */
+#include <net/if.h>
+#include <net/if_dl.h>
+#include <netinet/in.h>
+#include <netinet/if_ether.h>
+
+#ifdef INET
+#include <netinet/in_var.h>
+#endif
+
+#include <bsp/irq.h>
+#include <bsp/GT64260ethreg.h>
+#include <bsp/GT64260eth.h>
+#include <bsp/VPD.h>
+
+#define GT_ETH_TASK_NAME  "Geth"
+#define PKT_BUF_SZ 1536
+#define SOFTC_ALIGN  31   
+#define HASH_ALIGN   15   
+
+#define TXQ_HiLmt_OFF 2
+
+/* <skf> 
+ * 1. printk debug is for diagnosis only, which may cause
+ * unexpected result, especially if txq is under heavy load
+ * because CPU is fast with a decent cache.
+ */
+#define GTeth_debug 0
+#define GTeth_rx_debug 0
+
+#if 0
+#define GE_FORGOT
+#define GE_NORX
+#define GT_DEBUG 
+#endif
+
+/* RTEMS event to kill the daemon */
+#define KILL_EVENT		RTEMS_EVENT_1
+/* RTEMS event to (re)start the transmitter */
+#define START_TRANSMIT_EVENT    RTEMS_EVENT_2
+/* RTEMS events used by the ISR */
+#define RX_EVENT		RTEMS_EVENT_3
+#define TX_EVENT		RTEMS_EVENT_4
+#define ERR_EVENT		RTEMS_EVENT_5
+
+#define ALL_EVENTS (KILL_EVENT|START_TRANSMIT_EVENT|RX_EVENT|TX_EVENT|ERR_EVENT)
+
+enum GTeth_whack_op {
+	GE_WHACK_START,		GE_WHACK_RESTART,
+	GE_WHACK_CHANGE,	GE_WHACK_STOP
+};
+
+enum GTeth_hash_op {
+	GE_HASH_ADD,		GE_HASH_REMOVE,
+};
+
+#define	ET_MINLEN 64		/* minimum message length */
+
+static int GTeth_ifioctl(struct ifnet *ifp,unsigned cmd, caddr_t data);
+static void GTeth_ifstart (struct ifnet *);
+static void GTeth_ifchange(struct GTeth_softc *sc);
+static void GTeth_init_rx_ring(struct GTeth_softc *sc);
+static void GT64260eth_daemon(void *arg);
+static int GT64260eth_sendpacket(struct GTeth_softc *sc,struct mbuf *m,enum GTeth_txprio);
+static unsigned GTeth_txq_done(struct GTeth_softc *sc, enum GTeth_txprio txprio);
+static void GTeth_tx_cleanup(struct GTeth_softc *sc, enum GTeth_txprio, int);
+static void GTeth_tx_start(struct GTeth_softc *sc, enum GTeth_txprio);
+static void GTeth_tx_stop(struct GTeth_softc *sc, enum GTeth_whack_op op);
+static void GTeth_rx_cleanup(struct GTeth_softc *sc, enum GTeth_rxprio);
+static int GT64260eth_rx(struct GTeth_softc *sc, enum GTeth_rxprio);
+static void GTeth_rx_setup(struct GTeth_softc *sc);
+static void GTeth_rxprio_setup(struct GTeth_softc *sc, enum GTeth_rxprio);
+static void GTeth_rx_stop(struct GTeth_softc *dc, enum GTeth_whack_op op);
+static void GT64260eth_isr();
+static int GTeth_hash_compute(struct GTeth_softc *sc,unsigned char eaddr[ETHER_ADDR_LEN]);
+static int GTeth_hash_entry_op(struct GTeth_softc *sc, enum GTeth_hash_op op,
+	enum GTeth_rxprio prio,unsigned char eaddr[ETHER_ADDR_LEN]);
+
+static int GTeth_hash_fill(struct GTeth_softc *sc);
+static void GTeth_hash_init(struct GTeth_softc *sc);
+
+static struct GTeth_softc *root_GT64260eth_dev = NULL;
+static int GTeth_MissedFrame_err=0;  
+
+/*
+ * Convert Ethernet address to printable (loggable) representation.
+ */
+static const char digits[] = "0123456789abcdef";
+char * ether_sprintf(unsigned char *ap)
+{
+  int i;
+  static char etherbuf[18];
+  char *cp = etherbuf;
+
+  for (i = 0; i < 6; i++) {
+      *cp++ = digits[*ap >> 4];
+      *cp++ = digits[*ap++ & 0xf];
+      *cp++ = ':';
+  }
+  *--cp = 0;
+  return (etherbuf);
+}
+
+/* We can hard code the address here if config->hardware_address failed */
+static int GTethGet_macaddr(int macno, char *hwaddr)
+{
+  hwaddr[0] = 0x00;
+  hwaddr[1] = 0x01;
+  hwaddr[2] = 0xaf;
+  hwaddr[3] = 0x0b;
+  hwaddr[4] = 0x75;
+  hwaddr[5] = 0x36;
+
+  return 0;
+}
+
+static void GT64260eth_irq_on(const rtems_irq_connect_data *irq)
+{
+  struct GTeth_softc *sc;
+
+  for (sc= root_GT64260eth_dev; sc; sc= sc-> next_module) {
+    printk("GT64260eth_irq_on\n");
+    outl(0x30883444,ETH0_EIMR); /* MOTLoad default interrupt mask */
+    return;
+  }
+}
+
+static void GT64260eth_irq_off(const rtems_irq_connect_data *irq)
+{
+  struct GTeth_softc *sc;
+
+  for (sc= root_GT64260eth_dev; sc; sc= sc-> next_module)
+      outl(0, ETH0_EIMR);
+}
+
+static int GT64260eth_irq_is_on(const rtems_irq_connect_data *irq)
+{
+  return(inl(ETH0_EICR) & ETH_IR_EtherIntSum);
+}
+
+static void GT64260eth_isr()
+{
+  struct GTeth_softc *sc = root_GT64260eth_dev;
+  rtems_event_set  events=0;
+  uint32_t cause;
+
+
+  cause = inl(ETH0_EICR);
+  outl( ~cause,ETH0_EICR);  /* clear the ICR */
+
+  if (cause & (ETH_IR_RxBuffer_3|ETH_IR_RxError_3)) {
+     sc->stats.rxInterrupts++;
+     events |= RX_EVENT;
+  }
+  /* If there is an error, we want to continue to next descriptor */
+  if (cause & (ETH_IR_TxBufferHigh|ETH_IR_TxEndHigh|ETH_IR_TxErrorHigh)) {
+       sc->stats.txInterrupts++;
+       events |= TX_EVENT;
+       if ((sc->txq_nactive) && ((inl(ETH0_ESDCMR)&ETH_ESDCMR_TXDH)==0))
+          outl(ETH_ESDCMR_TXDH | ETH_ESDCMR_ERD,ETH0_ESDCMR);
+  } 
+  if ( (!cause) || (cause & 0x803d00)) {
+       sc->intr_errsts[sc->intr_err_ptr2++]=cause;
+       sc->intr_err_ptr2 %=INTR_ERR_SIZE;   /* Till Straumann */
+       events |= ERR_EVENT;
+  }
+
+  rtems_event_send(sc->daemonTid, events);
+}
+
+static rtems_irq_connect_data GT64260ethIrqData={
+	BSP_MAIN_ETH0_IRQ,
+	(rtems_irq_hdl) GT64260eth_isr,
+	(rtems_irq_enable) GT64260eth_irq_on,
+	(rtems_irq_disable) GT64260eth_irq_off,
+	(rtems_irq_is_enabled) GT64260eth_irq_is_on, 
+};
+
+static void GT64260eth_init_hw(struct GTeth_softc *sc)
+{
+
+#ifdef GT_DEBUG
+  printk("GT64260eth_init_hw(");
+#endif
+  /* Kate Feng : Turn the hardware snoop on as MOTLoad did not have
+   * it on by default.
+   */
+  outl(RxBSnoopEn|TxBSnoopEn|RxDSnoopEn|TxDSnoopEn, GT_CUU_Eth0_AddrCtrlLow);
+  outl(HashSnoopEn, GT_CUU_Eth0_AddrCtrlHigh);
+
+  sc->rxq_intrbits=0;
+  sc->sc_flags=0;
+  
+#ifndef GE_NORX
+  GTeth_rx_setup(sc);
+#endif
+
+#ifndef GE_NOTX
+  GTeth_tx_start(sc, GE_TXPRIO_HI);
+#endif
+
+  sc->sc_pcr |= ETH_EPCR_HS_512;
+  outl(sc->sc_pcr, ETH0_EPCR);
+  outl(sc->sc_pcxr, ETH0_EPCXR); /* port config. extended reg. */
+  outl(0, ETH0_EICR); /* interrupt cause register */
+  outl(sc->sc_intrmask, ETH0_EIMR);
+#ifndef GE_NOHASH
+  /* Port Hash Table Pointer Reg*/
+  outl(((unsigned) sc->sc_hashtable),ETH0_EHTPR);
+#endif
+#ifndef GE_NORX
+  outl(ETH_ESDCMR_ERD,ETH0_ESDCMR); /* enable Rx DMA in SDMA Command Register */
+  sc->sc_flags |= GE_RXACTIVE;
+#endif
+#ifdef GT_DEBUG
+  printk("SDCMR 0x%x ", inl(ETH0_ESDCMR));
+#endif
+
+  /* connect the interrupt handler which should
+   * take care of enabling interrupts
+   */
+  if (!BSP_install_rtems_irq_handler(&GT64260ethIrqData))
+     rtems_panic("GT64260eth: unable to install ISR");
+   
+  /* The ethernet port is ready to transmit/receive */
+  outl(sc->sc_pcr | ETH_EPCR_EN, ETH0_EPCR);
+
+#ifdef GT_DEBUG
+  printk(")\n");
+#endif
+}
+
+static void GT64260eth_stop_hw(struct GTeth_softc *sc)
+{
+
+  printk("GT64260eth_stop_hw(");
+
+  /* remove our interrupt handler which will also
+  * disable interrupts at the MPIC and the device
+  * itself
+  */
+  if (!BSP_remove_rtems_irq_handler(&GT64260ethIrqData))
+     rtems_panic("Yellowfin: unable to remove IRQ handler!");
+
+  outl(sc->sc_pcr, ETH0_EPCR);
+  outl(0, ETH0_EIMR);
+
+  sc->arpcom.ac_if.if_flags &= ~IFF_RUNNING;
+#ifndef GE_NOTX
+  GTeth_tx_stop(sc, GE_WHACK_STOP);
+#endif
+#ifndef GE_NORX
+  GTeth_rx_stop(sc, GE_WHACK_STOP);
+#endif
+  sc->sc_hashtable = NULL;
+  if (GTeth_debug>0) printk(")");
+}
+
+static void GT64260eth_stop(struct GTeth_softc *sc)
+{
+  if (GTeth_debug>0) printk("GT64260eth_stop(");
+
+  /* The hardware is shutdown in the daemon */
+  /* kill the daemon. We also must release the networking
+   * semaphore or there'll be a deadlock...
+   */
+  rtems_event_send(sc->daemonTid, KILL_EVENT);
+  rtems_bsdnet_semaphore_release();
+
+  sc->daemonTid=0;
+  /* now wait for it to die */
+  rtems_semaphore_obtain(sc->daemonSync,RTEMS_WAIT,RTEMS_NO_TIMEOUT);
+
+  /* reacquire the bsdnet semaphore */
+  rtems_bsdnet_semaphore_obtain();
+  if (GTeth_debug>0) printk(")");
+}
+
+static void GT64260eth_ifinit(void *arg)
+{
+  struct GTeth_softc *sc = (struct GTeth_softc*)arg;
+  int i;
+
+#ifdef GT_DEBUG
+  printk("GT64260eth_ifinit(): daemon ID: 0x%08x)\n", sc->daemonTid);
+#endif
+  if (sc->daemonTid) {
+#ifdef GT_DEBUG
+     printk("GT64260eth: daemon already up, doing nothing\n");
+#endif
+     return;
+  }
+
+#ifndef GE_NOHASH
+  /* Mvme5500, the user must initialize the hash table before enabling the 
+   * Ethernet controller 
+   */
+  GTeth_hash_init(sc);
+  GTeth_hash_fill(sc);
+#endif
+
+  sc->intr_err_ptr1=0;
+  sc->intr_err_ptr2=0;
+  for (i=0; i< INTR_ERR_SIZE; i++) sc->intr_errsts[i]=0;
+
+  /* initialize the hardware (we are holding the network semaphore at this point) */
+  (void)GT64260eth_init_hw(sc);
+
+  /* launch network daemon */
+
+  /* NOTE:
+   * in ss-20011025 (and later) any task created by 'bsdnet_newproc' is
+   * wrapped by code which acquires the network semaphore...
+   */
+   sc->daemonTid = rtems_bsdnet_newproc(GT_ETH_TASK_NAME,4096,GT64260eth_daemon,arg);
+
+  /* Tell the world that we're running */
+  sc->arpcom.ac_if.if_flags |= IFF_RUNNING;
+
+}
+
+/* attach parameter tells us whether to attach or to detach the driver */
+/* Attach this instance, and then all the sub-devices */
+int rtems_GT64260eth_driver_attach(struct rtems_bsdnet_ifconfig *config, int attach)
+{
+  struct GTeth_softc *sc;
+  struct ifnet *ifp;
+  unsigned sdcr, data;
+  unsigned char hwaddr[6];
+  int i, unit, phyaddr;
+  void	   *softc_mem;
+  char     *name;
+
+  unit = rtems_bsdnet_parse_driver_name(config, &name);
+  if (unit < 0) return 0;
+ 
+  printk("\nEthernet driver name %s unit %d \n",name, unit);
+  printk("Copyright (c) 2002 Allegro Networks, Inc., Wasabi Systems, Inc.\n");
+  printk("(c) 2004, Brookhaven National Lab. <feng1@bnl.gov> (RTEMS/mvme5500 port)\n");
+
+  /* Make certain elements e.g. descriptor lists are aligned. */
+  softc_mem = rtems_bsdnet_malloc(sizeof(*sc) + SOFTC_ALIGN, M_FREE, M_NOWAIT);
+
+  /* Check for the very unlikely case of no memory. */
+  if (softc_mem == NULL)
+     rtems_panic("GT64260eth: OUT OF MEMORY");
+
+  sc = (void *)(((long)softc_mem + SOFTC_ALIGN) & ~SOFTC_ALIGN);
+  memset(sc, 0, sizeof(*sc));
+
+  if (GTeth_debug>0) printk("txq_desc[0] addr:%x, rxq_desc[0] addr:%x, sizeof sc %d\n",&sc->txq_desc[0], &sc->rxq_desc[0], sizeof(*sc));
+
+  sc->sc_macno = unit-1;
+
+  data = inl(ETH_EPAR);
+  phyaddr = ETH_EPAR_PhyAD_GET(data, sc->sc_macno);
+
+  /* try to read HW address from the device if not overridden
+   * by config
+   */
+  if (config->hardware_address) {
+     memcpy(hwaddr, config->hardware_address, ETHER_ADDR_LEN);
+  } else {
+    printk("Read EEPROM ");
+     for (i = 0; i < 6; i++)
+       hwaddr[i] = ConfVPD_buff[VPD_ENET0_OFFSET+i];
+  }
+
+#ifdef GT_DEBUG
+  printk("using MAC addr from device:");
+  for (i = 0; i < ETHER_ADDR_LEN; i++) printk("%x:", hwaddr[i]);
+  printk("\n");
+#endif
+
+  memcpy(sc->arpcom.ac_enaddr, hwaddr, ETHER_ADDR_LEN);
+
+  ifp = &sc->arpcom.ac_if;
+
+  sc->sc_pcr = inl(ETH0_EPCR);
+  sc->sc_pcxr = inl(ETH0_EPCXR);
+  sc->sc_intrmask = inl(ETH0_EIMR) | ETH_IR_MIIPhySTC;
+
+  printk("address %s\n", ether_sprintf(hwaddr));
+
+#ifdef GT_DEBUG
+  printk(", pcr %x, pcxr %x ", sc->sc_pcr, sc->sc_pcxr);
+#endif
+
+
+  sc->sc_pcxr |= ETH_EPCXR_PRIOrx_Override;
+  sc->sc_pcxr |= (3<<6); /* highest priority only */
+  sc->sc_pcxr &= ~ETH_EPCXR_RMIIEn;  /* MII mode */
+
+  /* Max. Frame Length (packet) allowed for reception is 1536 bytes,
+   * instead of 2048 (MOTLoad default) or 64K.
+   */
+  sc->sc_pcxr &= ~(3 << 14);
+  sc->sc_pcxr |= (ETH_EPCXR_MFL_1536 << 14);
+  sc->sc_max_frame_length = PKT_BUF_SZ;
+
+
+  if (sc->sc_pcr & ETH_EPCR_EN) {
+      int tries = 1000;
+      /* Abort transmitter and receiver and wait for them to quiese*/
+      outl(ETH_ESDCMR_AR|ETH_ESDCMR_AT,ETH0_ESDCMR);
+      do {
+	rtems_bsp_delay(100);
+      } while (tries-- > 0 && (inl(ETH0_ESDCMR) & (ETH_ESDCMR_AR|ETH_ESDCMR_AT)));
+  }
+#ifdef GT_DEBUG
+  printk(", phy %d (mii)\n", phyaddr);
+  printk("ETH0_ESDCMR %x ", inl(ETH0_ESDCMR));
+#endif
+
+  sc->sc_pcr &= ~(ETH_EPCR_EN | ETH_EPCR_RBM | ETH_EPCR_PM | ETH_EPCR_PBF);
+
+#ifdef GT_DEBUG
+	printk("Now sc_pcr %x,sc_pcxr %x", sc->sc_pcr, sc->sc_pcxr);
+#endif
+
+  /*
+   * Now turn off the GT.  If it didn't quiese, too ***ing bad.
+   */
+  outl(sc->sc_pcr, ETH0_EPCR);
+  outl(sc->sc_intrmask, ETH0_EIMR);
+  sdcr = inl(ETH0_ESDCR);
+  /* Burst size is limited to 4 64bit words */
+  ETH_ESDCR_BSZ_SET(sdcr, ETH_ESDCR_BSZ_4);
+  sdcr |= ETH_ESDCR_RIFB;/*limit interrupt on frame boundaries, instead of buffer*/
+#if 0
+  sdcr &= ~(ETH_ESDCR_BLMT|ETH_ESDCR_BLMR); /* MOTLoad defualt Big-endian */
+#endif
+  outl(sdcr, ETH0_ESDCR);
+
+#ifdef GT_DEBUG
+  printk("sdcr %x \n", sdcr);
+#endif
+
+  if (phyaddr== -1) rtems_panic("MII auto negotiation ?");
+
+  ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+
+  ifp->if_softc = sc;
+
+  /* set this interface's name and unit */
+  ifp->if_unit = unit;
+  ifp->if_name = name;
+
+  ifp->if_mtu = config->mtu ? config->mtu : ETHERMTU;
+
+  ifp->if_init = GT64260eth_ifinit;
+  ifp->if_ioctl = GTeth_ifioctl;
+  ifp->if_start = GTeth_ifstart;
+  ifp->if_output = ether_output;
+
+  /*  ifp->if_watchdog = GTeth_ifwatchdog;*/
+
+  if (ifp->if_snd.ifq_maxlen == 0)
+    ifp->if_snd.ifq_maxlen = ifqmaxlen; 
+
+  /* create the synchronization semaphore */
+  if (RTEMS_SUCCESSFUL != rtems_semaphore_create(
+     rtems_build_name('G','e','t','h'),0,0,0,&sc->daemonSync))
+     rtems_panic("GT64260eth: semaphore creation failed");
+
+  sc->next_module = root_GT64260eth_dev;
+  root_GT64260eth_dev = sc;
+
+  /* Actually attach the interface */
+  if_attach(ifp);
+  ether_ifattach(ifp);
+
+#ifdef GT_DEBUG
+  printk("GT64260eth: Ethernet driver has been attached (handle 0x%08x,ifp 0x%08x)\n",sc, ifp);
+#endif
+
+  return(1);
+}
+
+static void GT64260eth_stats(struct GTeth_softc *sc)
+{
+  struct ifnet *ifp = &sc->arpcom.ac_if;
+
+  printf("       Rx Interrupts:%-8lu\n", sc->stats.rxInterrupts);
+  printf("     Receive Packets:%-8lu\n", ifp->if_ipackets);
+  printf("     Receive  errors:%-8lu\n", ifp->if_ierrors);
+  printf(" Missed Frame errors:%-8lu\n", GTeth_MissedFrame_err);
+  printf("      Framing Errors:%-8lu\n", sc->stats.frame_errors);
+  printf("          Crc Errors:%-8lu\n", sc->stats.crc_errors);
+  printf("    Oversized Frames:%-8lu\n", sc->stats.length_errors);
+  printf("         Active Rxqs:%-8lu\n", sc->rxq_active); 
+  printf("       Tx Interrupts:%-8lu\n", sc->stats.txInterrupts);
+  printf("Multi-Buffer Packets:%-8lu\n", sc->stats.txMultiBuffPacket);
+  printf("   Transmitt Packets:%-8lu\n", ifp->if_opackets);
+  printf("   Transmitt  errors:%-8lu\n", ifp->if_oerrors);
+  printf("    Tx/Rx collisions:%-8lu\n", ifp->if_collisions);
+  printf("         Active Txqs:%-8lu\n", sc->txq_nactive); 
+}
+
+GT64260eth_err()
+{
+  printf(" Missed Frame errors:%-8lu\n", GTeth_MissedFrame_err);
+}
+
+static int GTeth_ifioctl(struct ifnet *ifp,unsigned cmd, caddr_t data)
+{
+  struct GTeth_softc *sc = ifp->if_softc;
+  struct ifreq *ifr = (struct ifreq *) data;
+
+  int error = 0;
+
+#ifdef GT_DEBUG
+  printk("GTeth_ifioctl(");
+#endif
+
+  switch (cmd) {
+    default:
+      if (GTeth_debug >0) {
+         printk("etherioctl(");
+         if (cmd== SIOCSIFADDR) printk("SIOCSIFADDR ");
+      }
+      return ether_ioctl(ifp, cmd, data);
+
+    case SIOCSIFFLAGS:
+       switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
+            case IFF_RUNNING:	/* not up, so we stop */
+	         GT64260eth_stop(sc);
+	         break;
+            case IFF_UP:  /* not running, so we start */
+	         GT64260eth_ifinit(sc);
+	         break;
+	    case IFF_UP|IFF_RUNNING:/* active->active, update */
+	         GT64260eth_stop(sc);
+                 GT64260eth_ifinit(sc);
+	         break;
+            default:			/* idle->idle: do nothing */
+	         break;
+       }
+       break;
+    case SIO_RTEMS_SHOW_STATS:
+       GT64260eth_stats (sc);
+       break;
+    case SIOCADDMULTI:
+    case SIOCDELMULTI:
+       error = (cmd == SIOCADDMULTI)
+		  ? ether_addmulti(ifr, &sc->arpcom)
+		  : ether_delmulti(ifr, &sc->arpcom);
+       if (error == ENETRESET) {
+	   if (ifp->if_flags & IFF_RUNNING)
+	      GTeth_ifchange(sc);
+	      error = 0;
+       }
+       break;
+    case SIOCSIFMTU:
+       if (ifr->ifr_mtu > ETHERMTU || ifr->ifr_mtu < ETHERMIN) {
+	  error = EINVAL;
+	  break;
+       }
+       ifp->if_mtu = ifr->ifr_mtu;
+       break;
+  }
+
+#ifdef GT_DEBUG
+  printk("exit ioctl\n");
+#endif	
+  return error;
+}
+
+static void GTeth_ifstart(struct ifnet *ifp)
+{
+  struct GTeth_softc *sc = ifp->if_softc;
+
+#ifdef GT_DEBUG
+  printk("GTeth_ifstart(");
+#endif
+
+  if ((ifp->if_flags & IFF_RUNNING) == 0) {
+#ifdef GT_DEBUG
+     printk("IFF_RUNNING==0\n");
+#endif		
+     return;
+  }
+
+  ifp->if_flags |= IFF_OACTIVE;
+  rtems_event_send (sc->daemonTid, START_TRANSMIT_EVENT);
+#ifdef GT_DEBUG
+  printk(")\n");
+#endif
+}
+
+/* Initialize the Rx rings */
+static void GTeth_init_rx_ring(struct GTeth_softc *sc)
+{
+  int i;
+  volatile struct GTeth_desc *rxd;
+  unsigned nxtaddr;
+
+  sc->rxq_fi=0;
+  sc->rxq_head_desc = &sc->rxq_desc[0];
+  rxd = sc->rxq_head_desc;
+
+  sc->rxq_desc_busaddr = sc->rxq_head_desc;
+#ifdef GT_DEBUG
+  printk("rxq_desc_busaddr %x ,&sc->rxq_desc[0] %x\n",
+        sc->rxq_desc_busaddr, sc->rxq_head_desc);
+#endif
+
+  nxtaddr = sc->rxq_desc_busaddr + sizeof(*rxd);
+  sc->rx_buf_sz = (sc->arpcom.ac_if.if_mtu <= 1500 ? PKT_BUF_SZ : sc->arpcom.ac_if.if_mtu + 32);
+  sc->rxq_active = RX_RING_SIZE;
+
+  for (i = 0; i < RX_RING_SIZE; i++, rxd++, nxtaddr += sizeof(*rxd)) {
+    struct mbuf *m;
+ 
+    rxd->ed_lencnt= sc->rx_buf_sz <<16;
+    rxd->ed_cmdsts = RX_CMD_F|RX_CMD_L|RX_CMD_O|RX_CMD_EI;
+
+    MGETHDR(m, M_WAIT, MT_DATA);
+    MCLGET(m, M_WAIT);
+    m->m_pkthdr.rcvif =  &sc->arpcom.ac_if;
+    sc->rxq_mbuf[i] = m;
+
+    /* convert mbuf pointer to data pointer of correct type */	
+    rxd->ed_bufptr = mtod(m, void *);
+
+    /*
+     * update the nxtptr to point to the next txd.
+     */
+    if (i == RX_RING_SIZE - 1)
+	nxtaddr = sc->rxq_desc_busaddr;
+    rxd->ed_nxtptr = nxtaddr;
+
+#ifdef GT_DEBUG
+  printk("ed_lencnt %x, rx_buf_sz %x ",rxd->ed_lencnt, sc->rx_buf_sz);
+  printk("ed_cmdsts %x \n",rxd->ed_cmdsts);
+  printk("mbuf @ 0x%x, next desc. @ 0x%x\n",rxd->ed_bufptr,rxd->ed_nxtptr);
+#endif
+  }
+}
+
+static void GTeth_rxprio_setup(struct GTeth_softc *sc, enum GTeth_rxprio rxprio)
+{
+
+  if (GTeth_debug>0) printk("GTeth_rxprio_setup(\n");
+  GTeth_init_rx_ring(sc);
+
+  sc->rxq_intrbits = ETH_IR_RxBuffer | ETH_IR_RxError;
+
+  switch (rxprio) {
+    case GE_RXPRIO_HI:
+      sc->rxq_intrbits |= ETH_IR_RxBuffer_3|ETH_IR_RxError_3;
+	 break;
+    case GE_RXPRIO_MEDHI:
+	 sc->rxq_intrbits |= ETH_IR_RxBuffer_2|ETH_IR_RxError_2;
+	 break;
+    case GE_RXPRIO_MEDLO:
+	 sc->rxq_intrbits |= ETH_IR_RxBuffer_1|ETH_IR_RxError_1;
+	 break;
+    case GE_RXPRIO_LO:
+	 sc->rxq_intrbits |= ETH_IR_RxBuffer_0|ETH_IR_RxError_0;
+	 break;
+  }
+  if (GTeth_debug>0) printk(")");
+}
+
+static int GT64260eth_rx(struct GTeth_softc *sc, enum GTeth_rxprio rxprio)
+{
+  struct ifnet *ifp = &sc->arpcom.ac_if;
+  struct mbuf *m;
+  int nloops=0;
+  unsigned int intr_status = sc->intr_errsts[sc->intr_err_ptr1];
+
+  if (GTeth_rx_debug>0) printk("GT64260eth_rx(");
+  if (GTeth_rx_debug>5) printk("(%d)", rxprio);
+
+  while (sc->rxq_active > 0) {
+    volatile struct GTeth_desc *rxd = &sc->rxq_desc[sc->rxq_fi];
+    struct ether_header *eh;
+    unsigned int cmdsts;
+    unsigned int byteCount;
+
+    cmdsts = rxd->ed_cmdsts;
+
+    /*
+     * Sometimes the GE "forgets" to reset the ownership bit.
+     * But if the length has been rewritten, the packet is ours
+     * so pretend the O bit is set.
+     *
+     */
+    byteCount = rxd->ed_lencnt & 0xffff;
+
+    if (cmdsts & RX_CMD_O) {
+      if (byteCount == 0) 
+         return(0);
+
+     /* <Kate Feng> Setting command/status to be zero seems to eliminate
+      * the spurious interrupt associated with the GE_FORGOT issue.
+      */
+      rxd->ed_cmdsts=0; 
+
+#ifdef GE_FORGOT
+      /* 
+       * For dignosis purpose only. Not a good practice to turn it on
+       */
+      printk("Rxq %d %d %d\n", sc->rxq_fi, byteCount,nloops);
+#endif
+    }
+
+    /* GT gave the ownership back to the CPU or the length has 
+     * been rewritten , which means there
+     * is new packet in the descriptor/buffer
+     */
+
+    if (GTeth_rx_debug>0) printk("desc%d: cmdsts=%x, len=%d\n",
+	   sc->rxq_fi,cmdsts,byteCount);
+    nloops++;
+    /*
+     * If this is not a single buffer packet with no errors
+     * or for some reason it's bigger than our frame size,
+     * ignore it and go to the next packet.
+     */
+    if ((cmdsts & (RX_CMD_F|RX_CMD_L|RX_STS_ES)) !=
+			    (RX_CMD_F|RX_CMD_L) ||
+		    byteCount > sc->sc_max_frame_length) {
+	if (GTeth_rx_debug>0) printk("Rx Error");
+	--sc->rxq_active;
+	ifp->if_ipackets++;
+	ifp->if_ierrors++;
+        if (cmdsts & RX_STS_OR) sc->stats.or_errors++;
+        if (cmdsts & RX_STS_CE) sc->stats.crc_errors++;
+	if (cmdsts & RX_STS_MFL) sc->stats.length_errors++;
+	if (cmdsts & RX_STS_SF) sc->stats.frame_errors++;
+	/*	if (cmdsts & RX_STS_M) GTeth_MissedFrame_err++;*/
+        if ((cmdsts & RX_STS_LC) || (cmdsts & RX_STS_COL))
+	   ifp->if_collisions++;
+	goto give_it_back;
+     }
+
+     m = sc->rxq_mbuf[sc->rxq_fi];
+     sc->rxq_mbuf[sc->rxq_fi] = NULL;
+     m->m_len = m->m_pkthdr.len = byteCount - sizeof(struct ether_header);
+     eh = mtod (m, struct ether_header *);
+     m->m_data += sizeof(struct ether_header);
+     ether_input (ifp, eh, m);
+     if (GTeth_rx_debug>20) {
+       if ( m->m_flags & M_BCAST ) printk("desc%d broadcast\n",sc->rxq_fi);
+       if ( m->m_flags & M_MCAST ) printk("multicast ");
+     }
+
+     ifp->if_ipackets++;
+     ifp->if_ibytes+=byteCount;
+     --sc->rxq_active;
+
+     give_it_back:
+     MGETHDR (m, M_WAIT, MT_DATA);
+     MCLGET (m, M_WAIT);
+     m->m_pkthdr.rcvif = ifp;
+     sc->rxq_mbuf[sc->rxq_fi]= m;
+     /* convert mbuf pointer to data pointer of correct type */	
+     rxd->ed_bufptr = mtod(m, void*); 
+     rxd->ed_lencnt = (unsigned long) sc->rx_buf_sz <<16;
+     rxd->ed_cmdsts = RX_CMD_F|RX_CMD_L|RX_CMD_O|RX_CMD_EI;
+
+     if (++sc->rxq_fi == RX_RING_SIZE) sc->rxq_fi = 0;
+
+     sc->rxq_active++;
+  } /* while (sc->rxq_active > 0) */
+  if (GTeth_rx_debug>0) printk(")");
+  return nloops;
+}
+
+static void GTeth_rx_setup(struct GTeth_softc *sc)
+{
+
+  if (GTeth_rx_debug>0) printk("GTeth_rx_setup(");
+
+  GTeth_rxprio_setup(sc, GE_RXPRIO_HI);
+
+  if ((sc->sc_flags & GE_RXACTIVE) == 0) {
+     /* First Rx Descriptor Pointer 3 */
+     outl( sc->rxq_desc_busaddr, ETH0_EFRDP3);
+     /* Current Rx Descriptor Pointer 3 */
+     outl( sc->rxq_desc_busaddr,ETH0_ECRDP3);
+#ifdef GT_DEBUG
+     printk("ETH0_EFRDP3 0x%x, ETH0_ECRDP3 0x%x \n", inl(ETH0_EFRDP3),
+	    inl(ETH0_ECRDP3)); 
+#endif
+  }
+  sc->sc_intrmask |= sc->rxq_intrbits;
+
+  if (GTeth_rx_debug>0) printk(")\n");
+}
+
+static void GTeth_rx_cleanup(struct GTeth_softc *sc, enum GTeth_rxprio rxprio)
+{
+  int i;
+
+  if (GTeth_rx_debug>0) printk( "GTeth_rx_cleanup(");
+  if (sc->rxq_curpkt)
+     m_freem(sc->rxq_curpkt);
+
+  for (i=0; i< RX_RING_SIZE; i++) {
+    if (sc->rxq_mbuf[i]) {
+      m_freem(sc->rxq_mbuf[i]);
+      sc->rxq_mbuf[i]=0;
+    }
+  }
+  if (GTeth_rx_debug>0) printk(")");
+}
+
+static void GTeth_rx_stop(struct GTeth_softc *sc, enum GTeth_whack_op op)
+{
+  if (GTeth_rx_debug>0) printk( "GTeth_rx_stop(");
+  sc->sc_flags &= ~GE_RXACTIVE;
+  sc->sc_idlemask &= ~(ETH_IR_RxBits|ETH_IR_RxBuffer_3|ETH_IR_RxError_3);
+  sc->sc_intrmask &= ~(ETH_IR_RxBits|ETH_IR_RxBuffer_3|ETH_IR_RxError_3);
+  outl(sc->sc_intrmask, ETH0_EIMR);
+  outl(ETH_ESDCMR_AR, ETH0_ESDCMR); /* abort receive */
+  do {
+     rtems_bsp_delay(10);
+  } while (inl(ETH0_ESDCMR) & ETH_ESDCMR_AR);
+  GTeth_rx_cleanup(sc, GE_RXPRIO_HI);
+  if (GTeth_rx_debug>0) printk(")");
+}
+
+static void GTeth_txq_free(struct GTeth_softc *sc, unsigned cmdsts)
+{
+  struct ifnet *ifp = &sc->arpcom.ac_if;
+  volatile struct GTeth_desc *txd = &sc->txq_desc[sc->txq_fi];
+
+  /* ownership is sent back to CPU */
+  if (GTeth_debug>0) printk("txq%d,active %d\n", sc->txq_fi, sc->txq_nactive);
+
+  txd->ed_cmdsts &= ~TX_CMD_O; /* <skf> in case GT forgot */
+
+  /* statistics */
+  ifp->if_opackets++;
+  ifp->if_obytes += sc->txq_mbuf[sc->txq_fi]->m_len;
+  if (cmdsts & TX_STS_ES) {
+       ifp->if_oerrors++;
+       if ((cmdsts & TX_STS_LC) || (cmdsts & TX_STS_COL))
+	   ifp->if_collisions++;
+  }
+  /* Free the original mbuf chain */
+  m_freem(sc->txq_mbuf[sc->txq_fi]);
+  sc->txq_mbuf[sc->txq_fi] = 0;
+  ifp->if_timer = 5;
+
+  sc->txq_free++;
+  if (++sc->txq_fi == TX_RING_SIZE) sc->txq_fi = 0;
+  --sc->txq_nactive;
+}
+
+static int txq_high_limit(struct GTeth_softc *sc)
+{
+  /*
+   * Have we [over]consumed our limit of descriptors?
+   * Do we have enough free descriptors?
+   */
+  if ( TX_RING_SIZE == sc->txq_nactive + TXQ_HiLmt_OFF) {
+     volatile struct GTeth_desc *txd2 = &sc->txq_desc[sc->txq_fi];
+     unsigned cmdsts;
+
+     cmdsts = txd2->ed_cmdsts;
+     if (cmdsts & TX_CMD_O) {  /* Ownership (1=GT 0=CPU) */
+	 int nextin;
+
+	 /*
+	  * Sometime the Discovery forgets to update the
+	  * last descriptor.  See if CPU owned the descriptor
+	  * after it (since we know we've turned that to
+	  * the discovery and if CPU owned it, the Discovery
+	  * gave it back).  If CPU does, we know the Discovery
+	  * gave back this one but forgot to mark it back to CPU.
+	  */
+	 nextin = (sc->txq_fi + 1) % TX_RING_SIZE;
+	 if (sc->txq_desc[nextin].ed_cmdsts & TX_CMD_O) {
+#if 0
+	    printk("Overconsuming Tx descriptors!\n");
+#endif
+	    return 1;
+         }
+         printk("Txq %d forgot\n", sc->txq_fi);
+     }
+    /* Txq ring is almost full, let's free the current buffer here */
+#if 0
+    printk("Txq ring near full, free desc%d\n",sc->txq_fi);
+#endif
+    GTeth_txq_free(sc, cmdsts);
+  } /* end if ( TX_RING_SIZE == sc->txq_nactive + TXQ_HiLmt_OFF) */
+  return 0;
+}
+
+static int GT64260eth_sendpacket(struct GTeth_softc *sc,struct mbuf *m, enum GTeth_txprio txprio)
+{
+  struct ifnet *ifp=&sc->arpcom.ac_if;
+  volatile struct GTeth_desc *txd = &sc->txq_desc[sc->txq_lo];
+  unsigned intrmask = sc->sc_intrmask;
+  unsigned index= sc->txq_lo;
+
+  if (GTeth_debug>0) printk("sendpacket(");
+
+  /* 
+   * The end-of-list descriptor we put on last time is the starting point
+   * for this packet.  The GT is supposed to terminate list processing on
+   * a NULL nxtptr but that currently is broken so a CPU-owned descriptor
+   * must terminate the list.
+   */
+  intrmask = sc->sc_intrmask;
+
+  if ( !(m->m_next)) /* single buffer packet */
+    sc->txq_mbuf[index]= m;
+  else /* multiple mbufs in this packet */
+  { 
+    struct mbuf *mtp, *mdest;
+    volatile unsigned char *pt;
+    int len, y;
+
+#ifdef GT_DEBUG
+    printk("multi mbufs ");
+#endif    
+    MGETHDR(mdest, M_WAIT, MT_DATA);
+    MCLGET(mdest, M_WAIT);
+    pt = (volatile unsigned char *)mdest->m_data;
+    for (mtp=m,len=0;mtp;mtp=mtp->m_next) {
+      if ( (y=(len+mtp->m_len)) > sizeof(union mcluster)) {
+	/* GT64260 allows us to chain the remaining to the nex
+         * free descriptors. 
+         */
+        printk("packet size %x > mcluster %x\n", y,sizeof(union mcluster)); 
+	rtems_panic("GT64260eth : packet too large ");
+      }
+      memcpy((void *)pt,(char *)mtp->m_data, mtp->m_len);
+      pt += mtp->m_len;
+#if 0
+      printk("%d ",mtp->m_len);
+#endif
+      len += mtp->m_len;
+    }
+#if 0
+    printk("\n");
+#endif
+    mdest->m_len=len;
+    /* free old mbuf chain */
+    m_freem(m);
+    sc->txq_mbuf[index] = m = mdest;
+    sc->stats.txMultiBuffPacket++;
+  }
+  if (m->m_len < ET_MINLEN) m->m_len = ET_MINLEN;
+
+  txd->ed_bufptr = mtod(m, void*); 
+  txd->ed_lencnt = m->m_len << 16;
+  txd->ed_cmdsts = TX_CMD_L|TX_CMD_GC|TX_CMD_P|TX_CMD_O|TX_CMD_F|TX_CMD_EI; 
+
+#ifdef GT_DEBUG 
+  printk("len = %d, cmdsts 0x%x ", m->m_len,txd->ed_cmdsts);
+#endif
+
+  /*
+   * Tell the SDMA engine to "Fetch!"
+   * Start Tx high and Tx low.
+   */
+  outl(ETH_ESDCMR_TXDH,ETH0_ESDCMR);
+  sc->txq_nactive++;
+  if ( ++sc->txq_lo == TX_RING_SIZE) sc->txq_lo = 0;
+  sc->txq_free--;
+
+  /*
+   * Since we have put an item into the packet queue, we now want
+   * an interrupt when the transmit queue finishes processing the
+   * list.  But only update the mask if needs changing.
+   */
+  intrmask |= sc->txq_intrbits & ( ETH_IR_TxEndHigh|ETH_IR_TxBufferHigh);
+  if (sc->sc_intrmask != intrmask) {
+      sc->sc_intrmask = intrmask;
+      outl(sc->sc_intrmask, ETH0_EIMR);
+  }
+
+#if 0
+  printk("EICR= %x, EIMR= %x ", inl(ETH0_EICR), inl(ETH0_EIMR));
+  printk("%s:transmit frame #%d queued in slot %d.\n",
+	      sc->arpcom.ac_if.if_name, sc->txq_lo, index);
+  printk("pcr %x, pcxr %x DMA dcr %x cmr %x\n", inl(ETH0_EPCR), inl(ETH0_EPCXR), inl(ETH0_ESDCR), inl(ETH0_ESDCMR));
+#endif
+
+  if (GTeth_debug>0) printk(")");
+  return 1;
+}
+
+static unsigned GTeth_txq_done(struct GTeth_softc *sc, enum GTeth_txprio txprio)
+{
+  if (GTeth_debug>0) printk("Txdone(" );
+
+  while (sc->txq_nactive > 0) {
+    /* next to be returned to the CPU */
+    volatile struct GTeth_desc *txd = &sc->txq_desc[sc->txq_fi];
+    unsigned cmdsts;
+
+    /* if GT64260 still owns it ....... */
+    if ((cmdsts = txd->ed_cmdsts) & TX_CMD_O) {
+       int nextin;
+
+       /* Someone quoted :
+	* "Sometimes the Discovery forgets to update the
+	* ownership bit in the descriptor."
+        * <skf> More correctly, the last descriptor of each
+        * transmitted frame is returned to CPU ownership and
+        * status is updated only after the actual transmission
+        * of the packet is completed.  Also, if there is an error
+        * during transmission, we want to continue the
+        * transmission of the next descriptor, in additions to
+        * reporting the error.
+        */
+       /* The last descriptor */
+       if (sc->txq_nactive == 1) return(0);
+
+       /*
+	* Sometimes the Discovery forgets to update the
+	* ownership bit in the descriptor.  See if CPU owned
+	* the descriptor after it (since we know we've turned
+	* that to the Discovery and if CPU owned it now then the
+	* Discovery gave it back).  If we do, we know the
+        * Discovery gave back this one but forgot to mark it
+	* back to CPU.
+	*/
+       nextin = (sc->txq_fi + 1) % TX_RING_SIZE;
+
+       if (sc->txq_desc[nextin].ed_cmdsts & TX_CMD_O) return(0); 
+       printk("Txq%d forgot\n",sc->txq_fi);
+    } /* end checking GT64260eth owner */
+    GTeth_txq_free(sc, cmdsts);   
+  }  /* end while */
+  if (GTeth_debug>0) printk(")\n");
+  return(1);
+}
+
+static void GTeth_tx_start(struct GTeth_softc *sc, enum GTeth_txprio txprio)
+{
+  int i;
+  volatile struct GTeth_desc *txd;
+  unsigned nxtaddr;
+
+#ifdef GT_DEBUG
+  printk("GTeth_tx_start(");
+#endif
+  sc->sc_intrmask &= ~(ETH_IR_TxEndHigh|ETH_IR_TxBufferHigh|
+			     ETH_IR_TxEndLow |ETH_IR_TxBufferLow);
+
+  txd = &sc->txq_desc[0];
+  sc->txq_desc_busaddr = &sc->txq_desc[0];
+#ifdef GT_DEBUG
+  printk("txq_desc_busaddr %x, &sc->txq_desc[0] %x \n",
+         sc->txq_desc_busaddr,&sc->txq_desc[0]);
+#endif
+
+  nxtaddr = sc->txq_desc_busaddr + sizeof(*txd);
+
+  sc->txq_pendq.ifq_maxlen = 10;
+  sc->txq_pendq.ifq_head= NULL;
+  sc->txq_pendq.ifq_tail= NULL;
+  sc->txq_nactive = 0;
+  sc->txq_fi = 0;
+  sc->txq_lo = 0;
+  sc->txq_inptr = PKT_BUF_SZ;
+  sc->txq_outptr = 0;
+  sc->txq_free = TX_RING_SIZE;
+
+  for (i = 0; i < TX_RING_SIZE;
+       i++, txd++,  nxtaddr += sizeof(*txd)) {
+      sc->txq_mbuf[i]=0;
+      txd->ed_bufptr = 0;
+
+      /*
+       * update the nxtptr to point to the next txd.
+       */
+      txd->ed_cmdsts = 0;
+      if ( i== TX_RING_SIZE-1) nxtaddr = sc->txq_desc_busaddr;
+      txd->ed_nxtptr =  nxtaddr;
+#ifdef GT_DEBUG
+      printk("next desc. @ 0x%x\n",txd->ed_nxtptr);
+#endif
+  }
+
+  switch (txprio) {
+    case GE_TXPRIO_HI:
+      sc->txq_intrbits = ETH_IR_TxEndHigh|ETH_IR_TxBufferHigh;
+	 sc->txq_esdcmrbits = ETH_ESDCMR_TXDH; /* Start Tx high */
+	 sc->txq_epsrbits = ETH_EPSR_TxHigh;
+         /* offset to current tx desc ptr reg */
+	 sc->txq_ectdp = ETH0_ECTDP1;
+         /* Current Tx Desc Pointer 1 */
+	 outl(sc->txq_desc_busaddr,ETH0_ECTDP1);
+#ifdef GT_DEBUG
+	 printk("ETH0_ECTDP1 %x",inl(ETH0_ECTDP1));
+#endif
+	 break;
+
+    case GE_TXPRIO_LO:
+	 sc->txq_intrbits = ETH_IR_TxEndLow|ETH_IR_TxBufferLow;
+	 sc->txq_esdcmrbits = ETH_ESDCMR_TXDL; /* Start TX low */
+	 sc->txq_epsrbits = ETH_EPSR_TxLow;
+	 sc->txq_ectdp = ETH0_ECTDP0;
+         /* Current Tx Desc Pointer 0 */
+	 outl(sc->txq_desc_busaddr,ETH0_ECTDP0);
+#ifdef GT_DEBUG
+	 printk("ETH0_ECTDP1 %x",inl(ETH0_ECTDP0));
+#endif
+	 break;
+
+    default:
+         printk("Invalid Txq prio\n");
+	 break;
+  }
+ 
+#ifdef GT_DEBUG
+  printk(")\n");
+#endif
+}
+
+static void GTeth_tx_cleanup(struct GTeth_softc *sc,enum GTeth_txprio txprio,int flush)
+{
+  int i;
+
+  if (GTeth_debug>0) printk( "GTeth_tx_cleanup(");
+
+  if (!flush) {
+     if (GTeth_debug>0) printk("--");
+     return;
+  }
+  for (i=0; i< TX_RING_SIZE; i++) {
+    if (sc->txq_mbuf[i]) {
+      m_freem(sc->txq_mbuf[i]);
+      sc->txq_mbuf[i]=0;
+    }
+  }
+  if (GTeth_debug>0) printk(")");
+}
+
+static void GTeth_tx_stop(struct GTeth_softc *sc, enum GTeth_whack_op op)
+{
+  if (GTeth_debug>0) printk("GTeth_tx_stop( ");
+
+  /* SDMA command register : stop Tx high and low */
+  outl(ETH_ESDCMR_STDH|ETH_ESDCMR_STDL, ETH0_ESDCMR);
+
+  GTeth_txq_done(sc, GE_TXPRIO_HI);
+  sc->sc_intrmask &= ~(ETH_IR_TxEndHigh|ETH_IR_TxBufferHigh|
+			     ETH_IR_TxEndLow |ETH_IR_TxBufferLow);
+  GTeth_tx_cleanup(sc, GE_TXPRIO_HI, op == GE_WHACK_STOP);
+
+  sc->arpcom.ac_if.if_timer = 0;
+  if (GTeth_debug>0) printk(")");
+}
+
+
+/* TOCHECK : Should it be about rx or tx ? */
+static void GTeth_ifchange(struct GTeth_softc *sc)
+{
+  if (GTeth_debug>0) printk("GTeth_ifchange(");
+  if (GTeth_debug>5) printk("(pcr=%#x,imr=%#x)",inl(ETH0_EPCR),inl(ETH0_EIMR));
+  printk("SIOCADDMULTI (SIOCDELMULTI): is it about rx or tx ?\n");
+  outl(sc->sc_pcr | ETH_EPCR_EN, ETH0_EPCR);
+  outl(sc->sc_intrmask, ETH0_EIMR);
+  GTeth_ifstart(&sc->arpcom.ac_if);
+  /* Current Tx Desc Pointer 0 and 1 */
+  if (GTeth_debug>5) printk("(ectdp0=%#x, ectdp1=%#x)",
+	    inl(ETH0_ECTDP0), inl(ETH0_ECTDP1));
+  if (GTeth_debug>0) printk(")");
+}
+
+static int GTeth_hash_compute(struct GTeth_softc *sc,unsigned char eaddr[ETHER_ADDR_LEN])
+{
+  unsigned w0, add0, add1;
+  unsigned result;
+
+  if (GTeth_debug>0) printk("GTeth_hash_compute(");
+  add0 = ((unsigned) eaddr[5] <<  0) |
+	 ((unsigned) eaddr[4] <<  8) |
+	 ((unsigned) eaddr[3] << 16);
+
+  add0 = ((add0 & 0x00f0f0f0) >> 4) | ((add0 & 0x000f0f0f) << 4);
+  add0 = ((add0 & 0x00cccccc) >> 2) | ((add0 & 0x00333333) << 2);
+  add0 = ((add0 & 0x00aaaaaa) >> 1) | ((add0 & 0x00555555) << 1);
+
+  add1 = ((unsigned) eaddr[2] <<  0) |
+	 ((unsigned) eaddr[1] <<  8) |
+	 ((unsigned) eaddr[0] << 16);
+
+  add1 = ((add1 & 0x00f0f0f0) >> 4) | ((add1 & 0x000f0f0f) << 4);
+  add1 = ((add1 & 0x00cccccc) >> 2) | ((add1 & 0x00333333) << 2);
+  add1 = ((add1 & 0x00aaaaaa) >> 1) | ((add1 & 0x00555555) << 1);
+
+  if (GTeth_debug>0) printk("eaddr= %s add1:%x add0:%x\n", ether_sprintf(eaddr), add1, add0);
+    
+  /*
+   * hashResult is the 15 bits Hash entry address.
+   * ethernetADD is a 48 bit number, which is derived from the Ethernet
+   * MAC address, by nibble swapping in every byte (i.e MAC address
+   * of 0x123456789abc translates to ethernetADD of 0x21436587a9cb).
+   */
+  if ((sc->sc_pcr & ETH_EPCR_HM) == 0) {
+     /*
+      * hashResult[14:0] = hashFunc0(ethernetADD[47:0])
+      *
+      * hashFunc0 calculates the hashResult in the following manner:
+      * hashResult[ 8:0] = ethernetADD[14:8,1,0]
+      *	XOR ethernetADD[23:15] XOR ethernetADD[32:24]
+      */
+     result = (add0 & 3) | ((add0 >> 6) & ~3);
+     result ^= (add0 >> 15) ^ (add1 >>  0);
+     result &= 0x1ff;
+     /*
+      *   hashResult[14:9] = ethernetADD[7:2]
+      */
+     result |= (add0 & ~3) << 7;	/* excess bits will be masked */
+     if (GTeth_debug>0) printk("hash result %x  ", result & 0x7fff);
+  } else {
+#define	TRIBITFLIP	073516240	/* yes its in octal */
+     /*
+      * hashResult[14:0] = hashFunc1(ethernetADD[47:0])
+      *
+      * hashFunc1 calculates the hashResult in the following manner:
+      * hashResult[08:00] = ethernetADD[06:14]
+      *	XOR ethernetADD[15:23] XOR ethernetADD[24:32]
+      */
+     w0 = ((add0 >> 6) ^ (add0 >> 15) ^ (add1)) & 0x1ff;
+     /*
+      * Now bitswap those 9 bits
+      */
+     result = 0;
+     result |= ((TRIBITFLIP >> (((w0 >> 0) & 7) * 3)) & 7) << 6;
+     result |= ((TRIBITFLIP >> (((w0 >> 3) & 7) * 3)) & 7) << 3;
+     result |= ((TRIBITFLIP >> (((w0 >> 6) & 7) * 3)) & 7) << 0;
+
+     /*
+      *   hashResult[14:09] = ethernetADD[00:05]
+      */
+     result |= ((TRIBITFLIP >> (((add0 >> 0) & 7) * 3)) & 7) << 12;
+     result |= ((TRIBITFLIP >> (((add0 >> 3) & 7) * 3)) & 7) << 9;
+     if (GTeth_debug>5) printk("1(%#x)", result);
+  }
+  if (GTeth_debug>0) printk(")");
+  /* 1/2K address filtering (MOTLoad default )? ->16KB memory required 
+   * or 8k address filtering ? -> 256KB memory required 
+   */
+  return result & ((sc->sc_pcr & ETH_EPCR_HS_512) ? 0x7ff : 0x7fff);
+}
+
+static int GTeth_hash_entry_op(struct GTeth_softc *sc, enum GTeth_hash_op op,
+	enum GTeth_rxprio prio,unsigned char eaddr[ETHER_ADDR_LEN])
+{
+  unsigned long long he;
+  unsigned long long *maybe_he_p = NULL;
+  int limit;
+  int hash;
+  int maybe_hash = 0;
+
+  if (GTeth_debug>0) printk("GTeth_hash_entry_op(prio %d ", prio);
+
+  hash = GTeth_hash_compute(sc, eaddr);
+
+  if (sc->sc_hashtable == NULL) {
+	rtems_panic("hashtable == NULL!");
+  }
+  if (GTeth_debug>0) printk("Hash computed %x eaddr %s\n", hash,ether_sprintf(eaddr));
+
+
+  /*
+   * Assume we are going to insert so create the hash entry we
+   * are going to insert.  We also use it to match entries we
+   * will be removing.  The datasheet is wrong for this.
+   */
+  he = (((unsigned long long) eaddr[5]) << 43) |
+       (((unsigned long long) eaddr[4]) << 35) |
+       (((unsigned long long) eaddr[3]) << 27) |
+       (((unsigned long long) eaddr[2]) << 19) |
+       (((unsigned long long) eaddr[1]) << 11) |
+       (((unsigned long long) eaddr[0]) <<  3) |
+       ((unsigned long long) HSH_PRIO_INS(prio) | HSH_V | HSH_R);
+  /*   he = 0x1b1acd87d08005;*/
+  /*
+   * The GT will search upto 12 entries for a hit, so we must mimic that.
+   */
+  hash &= (sc->sc_hashmask / sizeof(he));
+
+  if (GTeth_debug>0) {
+    unsigned val1, val2;
+
+    val1= he & 0xffffffff;
+    val2= (he >>32) & 0xffffffff;
+    printk("Hash addr value %x%x, entry %x\n",val2,val1, hash); 
+  }
+
+  for (limit = HSH_LIMIT; limit > 0 ; --limit) {
+      /*
+       * Does the GT wrap at the end, stop at the, or overrun the
+       * end?  Assume it wraps for now.  Stash a copy of the 
+       * current hash entry.
+       */
+      unsigned long long *he_p = &sc->sc_hashtable[hash];
+      unsigned long long thishe = *he_p;
+
+      /*
+       * If the hash entry isn't valid, that break the chain.  And
+       * this entry a good candidate for reuse.
+       */
+      if ((thishe & HSH_V) == 0) {
+	 maybe_he_p = he_p;
+	 break;
+      }
+
+      /*
+       * If the hash entry has the same address we are looking for
+       * then ...  if we are removing and the skip bit is set, its
+       * already been removed.  if are adding and the skip bit is
+       * clear, then its already added.  In either return EBUSY
+       * indicating the op has already been done.  Otherwise flip
+       * the skip bit and return 0.
+       */
+      if (((he ^ thishe) & HSH_ADDR_MASK) == 0) {
+	 if (((op == GE_HASH_REMOVE) && (thishe & HSH_S)) ||
+	    ((op == GE_HASH_ADD) && (thishe & HSH_S) == 0))
+	    return EBUSY;
+	  *he_p = thishe ^ HSH_S;
+
+	  if (GTeth_debug>0) {
+             unsigned val1, val2;
+
+             val1= *he_p & 0xffffffff;
+             val2= (*he_p >>32) & 0xffffffff;
+             printk("flip skip bit result %x%x entry %x ",val2,val1, hash);
+          }
+	  return 0;
+       }
+
+       /*
+	* If we haven't found a slot for the entry and this entry
+        * is currently being skipped, return this entry.
+	*/
+       if (maybe_he_p == NULL && (thishe & HSH_S)) {
+	  maybe_he_p = he_p;
+	  maybe_hash = hash;
+       }		
+       hash = (hash + 1) & (sc->sc_hashmask / sizeof(he));
+  }
+
+  /*
+   * If we got here, then there was no entry to remove.
+   */
+  if (op == GE_HASH_REMOVE) {
+     printk("GT64260eth : No entry to remove\n");
+     return ENOENT;
+  }
+
+  /*
+   * If we couldn't find a slot, return an error.
+   */
+  if (maybe_he_p == NULL) {
+     rtems_panic("GT64260eth : No slot found");
+     return ENOSPC;
+  }
+
+  /* Update the entry.*/
+  *maybe_he_p = he;
+  if (GTeth_debug>0) {
+    unsigned val1, val2;
+#if 0
+    unsigned long *pt= sc->sc_hashtable;
+    int i, loop;
+
+  for (loop= 0; loop< 256; loop++) {
+    printk("%d)", loop);
+    for (i=0; i< 16; i++, pt++) printk("%x ",*pt);
+    printk("\n");
+  }
+#endif
+    val1= he & 0xffffffff;
+    val2= (he >>32) & 0xffffffff;
+    printk("Update Hash result %x%x, table addr %x entry %x )\n",val2, val1, maybe_he_p, hash);
+  }
+  return 0;
+}
+
+static int GTeth_hash_fill(struct GTeth_softc *sc)
+{
+  struct ether_multistep step;
+  struct ether_multi *enm;
+  int error;
+
+  if (GTeth_debug>0) printk( "GTeth_hash_fill(");
+  error = GTeth_hash_entry_op(sc,GE_HASH_ADD,GE_RXPRIO_HI,sc->arpcom.ac_enaddr);
+
+  if (error) {
+     if (GTeth_debug>0) printk("!");
+     return error;
+  }
+
+  sc->sc_flags &= ~GE_ALLMULTI;
+  if ((sc->arpcom.ac_if.if_flags & IFF_PROMISC) == 0)
+     sc->sc_pcr &= ~ETH_EPCR_PM;
+  /* see lib/include/netinet/if_ether.h */
+  ETHER_FIRST_MULTI(step, &sc->arpcom, enm);
+  while (enm != NULL) {
+    if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
+      /* Frames are received regardless of their destinatin address */
+       sc->sc_flags |= GE_ALLMULTI;
+       sc->sc_pcr |= ETH_EPCR_PM;
+    } else {
+      /* Frames are only received if the destinatin address is found
+       * in the hash table
+       */
+       error = GTeth_hash_entry_op(sc, GE_HASH_ADD,
+	     GE_RXPRIO_MEDLO, enm->enm_addrlo);
+       if (error == ENOSPC) break;
+    }
+    ETHER_NEXT_MULTI(step, enm);
+  }
+  if (GTeth_debug>0) printk(")\n");
+  return error;
+}
+
+static void GTeth_hash_init(struct GTeth_softc *sc)
+{
+  void *hash_mem;
+
+  if (GTeth_debug>0) printk("GTeth_hash_init(");
+  /* MOTLoad defualt : 512 bytes of address filtering, which
+   * requires 16KB of memory 
+   */
+#if 1
+  hash_mem = rtems_bsdnet_malloc(HASH_DRAM_SIZE + HASH_ALIGN, M_FREE, M_NOWAIT);
+  sc->sc_hashtable  =(void *)(((long)hash_mem+ HASH_ALIGN) & ~HASH_ALIGN);
+#else
+  /* only for test */
+  hash_mem = 0x68F000;
+  sc->sc_hashtable  =(unsigned long long *)hash_mem;
+#endif
+  sc->sc_hashmask = HASH_DRAM_SIZE - 1;
+
+  memset((void *)sc->sc_hashtable, 0,HASH_DRAM_SIZE);
+  if (GTeth_debug>0)
+    printk("hashtable addr:%x, mask %x)\n", sc->sc_hashtable,sc->sc_hashmask);
+}
+
+static void GT64260eth_error(struct GTeth_softc *sc)
+{
+  struct ifnet	        *ifp = &sc->arpcom.ac_if;
+  unsigned int		intr_status= sc->intr_errsts[sc->intr_err_ptr1];
+
+  /* read and reset the status; because this is written
+   * by the ISR, we must disable interrupts here
+   */
+  if (intr_status) {
+    printk("%s%d: ICR = 0x%x ", 
+	   ifp->if_name, ifp->if_unit, intr_status);
+#if 1
+    if (intr_status & INTR_RX_ERROR) {
+       printk("Rxq error, if_ierrors %d\n",
+	      ifp->if_ierrors);
+    }
+#endif
+    /* Rx error is handled in GT64260eth_rx() */
+    if (intr_status & INTR_TX_ERROR) {
+       ifp->if_oerrors++;
+       printk("Txq error,  if_oerrors %d\n",ifp->if_oerrors);
+    }
+  }
+  else 
+    printk("%s%d: Ghost interrupt ?\n",ifp->if_name,
+	   ifp->if_unit);
+  sc->intr_errsts[sc->intr_err_ptr1++]=0;  
+  sc->intr_err_ptr1 %= INTR_ERR_SIZE;   /* Till Straumann */
+}
+
+
+/* The daemon does all of the work; RX, TX and cleaning up buffers/descriptors */
+static void GT64260eth_daemon(void *arg)
+{
+  struct GTeth_softc *sc = (struct GTeth_softc*)arg;
+  rtems_event_set	events;
+  struct mbuf	*m=0;
+  struct ifnet	*ifp=&sc->arpcom.ac_if;
+
+#if 0	
+  /* see comments in GT64260eth_init(); in newer versions of
+   * rtems, we hold the network semaphore at this point
+   */
+  rtems_semaphore_release(sc->daemonSync);
+#endif
+
+  /* NOTE: our creator possibly holds the bsdnet_semaphore.
+   *       since that has PRIORITY_INVERSION enabled, our
+   *       subsequent call to bsdnet_event_receive() will
+   *       _not_ release it. It's still in posession of our
+   *       owner.
+   *       This is different from how killing this task
+   *       is handled.
+   */
+
+  for (;;) {
+     /* sleep until there's work to be done */
+     /* Note: bsdnet_event_receive() acquires
+      *       the global bsdnet semaphore for
+      *       mutual exclusion.
+      */
+     rtems_bsdnet_event_receive(ALL_EVENTS,
+				RTEMS_WAIT | RTEMS_EVENT_ANY,
+				RTEMS_NO_TIMEOUT,
+				&events);
+ 
+     if (KILL_EVENT & events) break;
+
+#ifndef GE_NORX
+     if (events & RX_EVENT) GT64260eth_rx(sc,GE_RXPRIO_HI);
+#endif
+
+     /* clean up and try sending packets */
+     do { 
+#if 1
+	if (gpp_int_error!=0) {
+           printk("GPP interrupt error %d\n", gpp_int_error);
+           gpp_int_error=0;
+	}
+#endif
+	 if (sc->txq_nactive) GTeth_txq_done(sc, GE_TXPRIO_HI);
+
+         while (sc->txq_free>0) {
+           if (sc->txq_free>TXQ_HiLmt_OFF) {
+	      m=0;
+	      IF_DEQUEUE(&ifp->if_snd,m);
+              if (m==0) break;
+              GT64260eth_sendpacket(sc, m, GE_TXPRIO_HI); 
+           }
+           else {
+	     if (txq_high_limit(sc)) 
+                 break;
+           }
+         }
+         /* we leave this loop
+	  *  - either because there's no free buffer
+          *    (m=0 initializer && !sc->txq_free)
+	  *  - or there's nothing to send (IF_DEQUEUE
+	  *    returned 0
+	  */
+       } while (m);
+
+       ifp->if_flags &= ~IFF_OACTIVE;
+
+       /* Log errors and other uncommon events. */
+       if (events & ERR_EVENT) GT64260eth_error(sc); 
+  } /* end for(;;) { rtems_bsdnet_event_receive() .....*/
+
+  ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
+
+  /* shut down the hardware */
+  GT64260eth_stop_hw(sc);
+  /* flush the output queue */
+  for (;;) {
+      IF_DEQUEUE(&ifp->if_snd,m);
+      if (!m) break;
+      m_freem(m);
+  }
+  /* as of 'rtems_bsdnet_event_receive()' we own the
+   * networking semaphore
+   */
+  rtems_bsdnet_semaphore_release();
+  rtems_semaphore_release(sc->daemonSync);
+
+  /* Note that I dont use sc->daemonTid here - 
+   * theoretically, that variable could already
+   * hold a newly created TID
+   */
+  rtems_task_delete(RTEMS_SELF);
+}
+
Index: c/src/lib/libbsp/powerpc/mvme5500/network/GT64260eth.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/network/GT64260eth.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/network/GT64260eth.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,135 @@
+/* GT64260eth.h 
+ *
+ * Copyright (c) 2002 Allegro Networks, Inc., Wasabi Systems, Inc.
+ * All rights reserved.
+ * 
+ * RTEMS/Mvme5500 port 2004  by S. Kate Feng, <feng1@bnl.gov>,
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software developed for the NetBSD Project by
+ *      Allegro Networks, Inc., and Wasabi Systems, Inc.
+ * 4. The name of Allegro Networks, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ * 5. The name of Wasabi Systems, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ALLEGRO NETWORKS, INC. AND
+ * WASABI SYSTEMS, INC. ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL EITHER ALLEGRO NETWORKS, INC. OR WASABI SYSTEMS, INC.
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* Keep the ring sizes a power of two for efficiency.
+   Making the Tx ring too long decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE	32
+#define GT_NEXTTX(x)    ((x + 1) % TX_RING_SIZE )
+#define TX_QUARTER_FULL	TX_RING_SIZE/2
+#define TX_HALF_FULL	TX_RING_SIZE/2
+#define RX_RING_SIZE	16
+#define HASH_TABLE_SIZE 16
+#define HASH_DRAM_SIZE  HASH_TABLE_SIZE*1024  /* size of DRAM for hash table */
+#define INTR_ERR_SIZE   16
+		
+enum GTeth_txprio {
+	GE_TXPRIO_HI=1,
+	GE_TXPRIO_LO=0,
+	GE_TXPRIO_NONE=2
+};
+enum GTeth_rxprio {
+	GE_RXPRIO_HI=3,
+	GE_RXPRIO_MEDHI=2,
+	GE_RXPRIO_MEDLO=1,
+	GE_RXPRIO_LO=0
+};
+
+struct GTeth_softc {
+  struct GTeth_desc txq_desc[TX_RING_SIZE]; /* transmit descriptor memory */
+  struct GTeth_desc rxq_desc[RX_RING_SIZE]; /* receive descriptor memory */
+  struct mbuf* txq_mbuf[TX_RING_SIZE];	/* transmit buffer memory */
+  struct mbuf* rxq_mbuf[RX_RING_SIZE];	/* receive buffer memory */
+  struct GTeth_softc *next_module;
+  volatile unsigned int intr_errsts[INTR_ERR_SIZE]; /* capture the right intr_status */
+  unsigned int intr_err_ptr1;   /* ptr used in GTeth_error() */
+  unsigned int intr_err_ptr2;   /* ptr used in ISR */
+  struct ifqueue txq_pendq;	/* these are ready to go to the GT */
+  unsigned int txq_pending;
+  unsigned int txq_lo;		/* next to be given to GT */
+  unsigned int txq_fi; 		/* next to be returned to CPU */
+  unsigned int txq_ei_gapcount;	/* counter until next EI */
+  unsigned int txq_nactive;	/* number of active descriptors */
+  unsigned int txq_nintr;       /* number of txq desc. send TX_EVENT */
+  unsigned int txq_outptr;	/* where to put next transmit packet */
+  unsigned int txq_inptr;       /* start of 1st queued tx packet */
+  unsigned int txq_free;	/* free Tx queue slots. */  
+  unsigned txq_intrbits;	/* bits to write to EIMR */
+  unsigned txq_esdcmrbits;	/* bits to write to ESDCMR */
+  unsigned txq_epsrbits;	/* bits to test with EPSR */
+
+  caddr_t txq_ectdp;		/* offset to cur. tx desc ptr reg */
+  unsigned long txq_desc_busaddr;	/* bus addr of tx descriptors */
+  caddr_t txq_buf_busaddr;	/* bus addr of tx buffers */
+
+  struct mbuf *rxq_curpkt;	/* mbuf for current packet */
+  struct GTeth_desc *rxq_head_desc;  /* rxq head descriptor */
+  unsigned int rxq_fi; 		/* next to be returned to CPU */
+  unsigned int rxq_active;	/* # of descriptors given to GT */
+  unsigned rxq_intrbits;		/* bits to write to EIMR */
+  unsigned long rxq_desc_busaddr;	/* bus addr of rx descriptors */
+
+  struct arpcom arpcom;	        /* rtems if structure, contains ifnet */
+  int sc_macno;			/* which mac? 0, 1, or 2 */
+
+  unsigned int sc_tickflags;
+  #define	GE_TICK_TX_IFSTART	0x0001
+  #define	GE_TICK_RX_RESTART	0x0002
+  unsigned int sc_flags;
+  #define	GE_ALLMULTI	0x0001
+  #define	GE_PHYSTSCHG	0x0002
+  #define	GE_RXACTIVE	0x0004
+  unsigned sc_pcr;		/* current EPCR value */
+  unsigned sc_pcxr;		/* current EPCXR value */
+  unsigned sc_intrmask;		/* current EIMR value */
+  unsigned sc_idlemask;		/* suspended EIMR bits */
+  unsigned sc_max_frame_length;	/* maximum frame length */
+  unsigned rx_buf_sz; 
+
+  /* Hash table related members */
+  unsigned long long *sc_hashtable;
+  unsigned int sc_hashmask;	/* 0x1ff or 0x1fff */
+
+  rtems_id	daemonTid;
+  rtems_id	daemonSync; /* synchronization with the daemon */
+  /* statistics */
+  struct {
+    volatile unsigned long       rxInterrupts;
+
+    volatile unsigned long       txInterrupts;
+    unsigned long	txMultiBuffPacket;
+    unsigned long 	length_errors;
+    unsigned long	frame_errors;
+    unsigned long	crc_errors;
+    unsigned long       or_errors; /* overrun error */
+  } stats;
+};
Index: c/src/lib/libbsp/powerpc/mvme5500/network/GT64260ethreg.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/network/GT64260ethreg.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/network/GT64260ethreg.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,879 @@
+/*	$NetBSD: GT64260ethreg.h,v 1.2 2003/03/17 16:41:16 matt Exp $	*/
+
+/*
+ * Copyright (c) 2002 Allegro Networks, Inc., Wasabi Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software developed for the NetBSD Project by
+ *      Allegro Networks, Inc., and Wasabi Systems, Inc.
+ * 4. The name of Allegro Networks, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ * 5. The name of Wasabi Systems, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ALLEGRO NETWORKS, INC. AND
+ * WASABI SYSTEMS, INC. ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL EITHER ALLEGRO NETWORKS, INC. OR WASABI SYSTEMS, INC.
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _DEV_GTETHREG_H_
+#define	_DEV_GTETHREG_H_
+
+#define ETH__BIT(bit)			(1U << (bit))
+#define ETH__LLBIT(bit)			(1ULL << (bit))
+#define ETH__MASK(bit)			(ETH__BIT(bit) - 1)
+#define ETH__LLMASK(bit)		(ETH__LLBIT(bit) - 1)
+#define ETH__GEN(n, off)		(0x2400+((n) << 10)+(ETH__ ## off))
+#define	ETH__EXT(data, bit, len)	(((data) >> (bit)) & ETH__MASK(len))
+#define	ETH__LLEXT(data, bit, len)	(((data) >> (bit)) & ETH__LLMASK(len))
+#define	ETH__CLR(data, bit, len)	((data) &= ~(ETH__MASK(len) << (bit)))
+#define	ETH__INS(new, bit)		((new) << (bit))
+#define	ETH__LLINS(new, bit)		((unsigned long long)(new) << (bit))
+
+/*
+ * Descriptors used for both receive & transmit data.  Note that the descriptor
+ * must start on a 4LW boundary.  Since the GT accesses the descriptor as
+ * two 64-bit quantities, we must present them 32bit quantities in the right
+ * order based on endianess.
+ */
+
+struct GTeth_desc {
+#if defined(BYTE_ORDER) && BYTE_ORDER == BIG_ENDIAN /* for mvme5500 */
+	unsigned ed_lencnt;	/* Buffer size is hi 16 bits; Byte count (rx) is lo 16 */
+	unsigned ed_cmdsts;	/* command (hi16)/status (lo16) bits */
+	unsigned ed_nxtptr;	/* next descriptor (must be 4LW aligned) */
+	unsigned ed_bufptr;	/* pointer to packet buffer */
+#endif
+#if defined(BYTE_ORDER) && BYTE_ORDER == LITTLE_ENDIAN
+	unsigned ed_cmdsts;	/* command (hi16)/status (lo16) bits */
+	unsigned ed_lencnt;	/* length is hi 16 bits; count (rx) is lo 16 */
+	unsigned ed_bufptr;	/* pointer to packet buffer */
+	unsigned ed_nxtptr;	/* next descriptor (must be 4LW aligned) */
+#endif
+};
+
+/* Ethernet 0 address control (Low), Offset: 0xf200 */
+#define RxBSnoopEn      ETH__BIT(6)     /* Rx buffer snoop enable,1=enable*/
+#define TxBSnoopEn      ETH__BIT(14)    /* Tx buffer snoop enable */
+#define RxDSnoopEn      ETH__BIT(22)    /* Rx descriptor snoop enable */
+#define TxDSnoopEn      ETH__BIT(30)    /* Tx descriptor snoop enable */
+
+/* Ethernet 0 address control (High), Offset: 0xf204 */
+#define HashSnoopEn     ETH__BIT(6)     /* Hash Table snoop enable */
+
+/* <skf> */
+#define GT_CUU_Eth0_AddrCtrlLow  0xf200
+#define GT_CUU_Eth0_AddrCtrlHigh 0xf204
+
+/* Table 578: Ethernet TX Descriptor - Command/Status word
+ * All bits except F, EI, AM, O are only valid if TX_CMD_L is also set,
+ * otherwise should be 0 (tx).
+ */
+
+#define	TX_STS_LC	ETH__BIT(5)	/* Late Collision */
+#define	TX_STS_UR	ETH__BIT(6)	/* Underrun error */
+#define	TX_STS_RL	ETH__BIT(8)	/* Retransmit Limit (excession coll) */
+#define	TX_STS_COL	ETH__BIT(9)	/* Collision Occurred */
+#define	TX_STS_RC(v)	ETH__GETBITS(v, 10, 4)	/* Retransmit Count */
+#define	TX_STS_ES	ETH__BIT(15)	/* Error Summary (LC|UR|RL) */
+#define	TX_CMD_L	ETH__BIT(16)	/* Last - End Of Packet */
+#define	TX_CMD_F	ETH__BIT(17)	/* First - Start Of Packet */
+#define	TX_CMD_P	ETH__BIT(18)	/* Pad Packet */
+#define	TX_CMD_GC	ETH__BIT(22)	/* Generate CRC */
+#define	TX_CMD_EI	ETH__BIT(23)	/* Enable Interrupt */
+#define	TX_CMD_AM	ETH__BIT(30)	/* Auto Mode */
+#define	TX_CMD_O	ETH__BIT(31)	/* Ownership (1=GT 0=CPU) */
+
+#define	TX_CMD_FIRST	(TX_CMD_F|TX_CMD_O)
+#define	TX_CMD_LAST	(TX_CMD_L|TX_CMD_GC|TX_CMD_P|TX_CMD_O)
+
+/* Table 608: Ethernet RX Descriptor - Command/Status Word
+ * All bits except F, EI, AM, O are only valid if RX_CMD_L is also set,
+ * otherwise should be ignored (rx).
+ */
+#define	RX_STS_CE	ETH__BIT(0)	/* CRC Error */
+#define	RX_STS_COL	ETH__BIT(1)	/* Collision sensed during reception */
+#define	RX_STS_LC	ETH__BIT(5)	/* Late Collision (Reserved) */
+#define	RX_STS_OR	ETH__BIT(6)	/* Overrun Error */
+#define	RX_STS_MFL	ETH__BIT(7)	/* Max Frame Len Error */
+#define	RX_STS_SF	ETH__BIT(8)	/* Short Frame Error (< 64 bytes) */
+#define	RX_STS_FT	ETH__BIT(11)	/* Frame Type (1 = 802.3) */
+#define	RX_STS_M	ETH__BIT(12)	/* Missed Frame */
+#define	RX_STS_HE	ETH__BIT(13)	/* Hash Expired (manual match) */
+#define	RX_STS_IGMP	ETH__BIT(14)	/* IGMP Packet */
+#define	RX_STS_ES	ETH__BIT(15)	/* Error Summary (CE|COL|LC|OR|MFL|SF) */
+#define	RX_CMD_L	ETH__BIT(16)	/* Last - End Of Packet */
+#define	RX_CMD_F	ETH__BIT(17)	/* First - Start Of Packet */
+#define	RX_CMD_EI	ETH__BIT(23)	/* Enable Interrupt */
+#define	RX_CMD_AM	ETH__BIT(30)	/* Auto Mode */
+#define	RX_CMD_O	ETH__BIT(31)	/* Ownership (1=GT 0=CPU) */
+
+/* Table 586: Hash Table Entry Fields
+ */
+#define HSH_V		ETH__LLBIT(0)	/* Entry is valid */
+#define HSH_S		ETH__LLBIT(1)	/* Skip this entry */
+#define HSH_RD		ETH__LLBIT(2)	/* Receive(1) / Discard (0) */
+#define HSH_R		ETH__LLBIT(2)	/* Receive(1) */
+#define	HSH_PRIO_GET(v)	ETH__LLEXT(v, 51, 2)
+#define	HSH_PRIO_INS(v)	ETH__LLINS(v, 51)
+#define	HSH_ADDR_MASK	0x7fffff8LLU
+#define	HSH_LIMIT	12
+
+
+#define	ETH_EPAR	0x2000		/* PHY Address Register */
+#define	ETH_ESMIR	0x2010		/* SMI Register */
+
+#define	ETH_BASE_ETH0	0x2400		/* Ethernet0 Register Base */
+#define	ETH_BASE_ETH1	0x2800		/* Ethernet1 Register Base */
+#define	ETH_BASE_ETH2	0x2c00		/* Ethernet2 Register Base */
+#define	ETH_SIZE	0x0400		/* Register Space */
+
+#define	ETH__EBASE	0x0000		/* Base of Registers */
+#define	ETH__EPCR	0x0000		/* Port Config. Register */
+#define	ETH__EPCXR	0x0008		/* Port Config. Extend Reg */
+#define	ETH__EPCMR	0x0010		/* Port Command Register */
+#define	ETH__EPSR	0x0018		/* Port Status Register */
+#define	ETH__ESPR	0x0020		/* Port Serial Parameters Reg */
+#define	ETH__EHTPR	0x0028		/* Port Hash Table Pointer Reg*/
+#define	ETH__EFCSAL	0x0030		/* Flow Control Src Addr Low */
+#define	ETH__EFCSAH	0x0038		/* Flow Control Src Addr High */
+#define	ETH__ESDCR	0x0040		/* SDMA Configuration Reg */
+#define	ETH__ESDCMR	0x0048		/* SDMA Command Register */
+#define	ETH__EICR	0x0050		/* Interrupt Cause Register */
+#define	ETH__EIMR	0x0058		/* Interrupt Mask Register */
+#define	ETH__EFRDP0	0x0080		/* First Rx Desc Pointer 0 */
+#define	ETH__EFRDP1	0x0084		/* First Rx Desc Pointer 1 */
+#define	ETH__EFRDP2	0x0088		/* First Rx Desc Pointer 2 */
+#define	ETH__EFRDP3	0x008c		/* First Rx Desc Pointer 3 */
+#define	ETH__ECRDP0	0x00a0		/* Current Rx Desc Pointer 0 */
+#define	ETH__ECRDP1	0x00a4		/* Current Rx Desc Pointer 1 */
+#define	ETH__ECRDP2	0x00a8		/* Current Rx Desc Pointer 2 */
+#define	ETH__ECRDP3	0x00ac		/* Current Rx Desc Pointer 3 */
+#define	ETH__ECTDP0	0x00e0		/* Current Tx Desc Pointer 0 */
+#define	ETH__ECTDP1	0x00e4		/* Current Tx Desc Pointer 1 */
+#define	ETH__EDSCP2P0L	0x0060		/* IP Differentiated Services
+					   CodePoint to Priority0 low */
+#define	ETH__EDSCP2P0H	0x0064		/* IP Differentiated Services
+					   CodePoint to Priority0 high*/
+#define	ETH__EDSCP2P1L	0x0068		/* IP Differentiated Services
+					   CodePoint to Priority1 low */
+#define	ETH__EDSCP2P1H	0x006c		/* IP Differentiated Services
+					   CodePoint to Priority1 high*/
+#define	ETH__EVPT2P	0x0068		/* VLAN Prio. Tag to Priority */
+#define	ETH__EMIBCTRS	0x0100		/* MIB Counters */
+
+/* SKF : we are only concerned with the Ethernet0 for the mvme5500 board */
+#define	ETH0_EBASE	0x2400		/* Base of Registers */
+#define	ETH0_EPCR	0x2400		/* Port Config. Register */
+#define	ETH0_EPCXR	0x2408		/* Port Config. Extend Reg */
+#define	ETH0_EPCMR	0x2410		/* Port Command Register */
+#define	ETH0_EPSR	0x2418		/* Port Status Register */
+#define	ETH0_ESPR	0x2420		/* Port Serial Parameters Reg */
+#define	ETH0_EHTPR	0x2428		/* Port Hash Table Pointer Reg*/
+#define	ETH0_EFCSAL	0x2430		/* Flow Control Src Addr Low */
+#define	ETH0_EFCSAH	0x2438		/* Flow Control Src Addr High */
+#define	ETH0_ESDCR	0x2440		/* SDMA Configuration Reg */
+#define	ETH0_ESDCMR	0x2448		/* SDMA Command Register */
+#define	ETH0_EICR	0x2450		/* Interrupt Cause Register */
+#define	ETH0_EIMR	0x2458		/* Interrupt Mask Register */
+#define	ETH0_EFRDP0	0x2480		/* First Rx Desc Pointer 0 */
+#define	ETH0_EFRDP1	0x2484		/* First Rx Desc Pointer 1 */
+#define	ETH0_EFRDP2	0x2488		/* First Rx Desc Pointer 2 */
+#define	ETH0_EFRDP3	0x248c		/* First Rx Desc Pointer 3 */
+#define	ETH0_ECRDP0	0x24a0		/* Current Rx Desc Pointer 0 */
+#define	ETH0_ECRDP1	0x24a4		/* Current Rx Desc Pointer 1 */
+#define	ETH0_ECRDP2	0x24a8		/* Current Rx Desc Pointer 2 */
+#define	ETH0_ECRDP3	0x24ac		/* Current Rx Desc Pointer 3 */
+#define	ETH0_ECTDP0	0x24e0		/* Current Tx Desc Pointer 0 */
+#define	ETH0_ECTDP1	0x24e4		/* Current Tx Desc Pointer 1 */
+#define	ETH0_EDSCP2P0L	0x2460		/* IP Differentiated Services
+					   CodePoint to Priority0 low */
+#define	ETH0_EDSCP2P0H	0x2464		/* IP Differentiated Services
+					   CodePoint to Priority0 high*/
+#define	ETH0_EDSCP2P1L	0x2468		/* IP Differentiated Services
+					   CodePoint to Priority1 low */
+#define	ETH0_EDSCP2P1H	0x246c		/* IP Differentiated Services
+					   CodePoint to Priority1 high*/
+#define	ETH0_EVPT2P	0x2468		/* VLAN Prio. Tag to Priority */
+#define	ETH0_EMIBCTRS	0x2500		/* MIB Counters */
+
+#define	ETH_BASE(n)	ETH__GEN(n, EBASE)
+#define	ETH_EPCR(n)	ETH__GEN(n, EPCR)	/* Port Config. Register */
+#define	ETH_EPCXR(n)	ETH__GEN(n, EPCXR)	/* Port Config. Extend Reg */
+#define	ETH_EPCMR(n)	ETH__GEN(n, EPCMR)	/* Port Command Register */
+#define	ETH_EPSR(n)	ETH__GEN(n, EPSR)	/* Port Status Register */
+#define	ETH_ESPR(n)	ETH__GEN(n, ESPR)	/* Port Serial Parameters Reg */
+#define	ETH_EHTPR(n)	ETH__GEN(n, EHPTR)	/* Port Hash Table Pointer Reg*/
+#define	ETH_EFCSAL(n)	ETH__GEN(n, EFCSAL)	/* Flow Control Src Addr Low */
+#define	ETH_EFCSAH(n)	ETH__GEN(n, EFCSAH)	/* Flow Control Src Addr High */
+#define	ETH_ESDCR(n)	ETH__GEN(n, ESDCR)	/* SDMA Configuration Reg */
+#define	ETH_ESDCMR(n)	ETH__GEN(n, ESDCMR)	/* SDMA Command Register */
+#define	ETH_EICR(n)	ETH__GEN(n, EICR)	/* Interrupt Cause Register */
+#define	ETH_EIMR(n)	ETH__GEN(n, EIMR)	/* Interrupt Mask Register */
+#define	ETH_EFRDP0(n)	ETH__GEN(n, EFRDP0)	/* First Rx Desc Pointer 0 */
+#define	ETH_EFRDP1(n)	ETH__GEN(n, EFRDP1)	/* First Rx Desc Pointer 1 */
+#define	ETH_EFRDP2(n)	ETH__GEN(n, EFRDP2)	/* First Rx Desc Pointer 2 */
+#define	ETH_EFRDP3(n)	ETH__GEN(n, EFRDP3)	/* First Rx Desc Pointer 3 */
+#define	ETH_ECRDP0(n)	ETH__GEN(n, ECRDP0)	/* Current Rx Desc Pointer 0 */
+#define	ETH_ECRDP1(n)	ETH__GEN(n, ECRDP1)	/* Current Rx Desc Pointer 1 */
+#define	ETH_ECRDP2(n)	ETH__GEN(n, ECRDP2)	/* Current Rx Desc Pointer 2 */
+#define	ETH_ECRDP3(n)	ETH__GEN(n, ECRDP3)	/* Current Rx Desc Pointer 3 */
+#define	ETH_ECTDP0(n)	ETH__GEN(n, ECTDP0)	/* Current Tx Desc Pointer 0 */
+#define	ETH_ECTDP1(n)	ETH__GEN(n, ECTDP1)	/* Current Tx Desc Pointer 1 */
+#define	ETH_EDSCP2P0L(n) ETH__GEN(n, EDSCP2P0L)	/* IP Differentiated Services
+						   CodePoint to Priority0 low */
+#define	ETH_EDSCP2P0H(n) ETH__GEN(n, EDSCP2P0H)	/* IP Differentiated Services
+						   CodePoint to Priority0 high*/
+#define	ETH_EDSCP2P1L(n) ETH__GEN(n, EDSCP2P1L)	/* IP Differentiated Services
+						   CodePoint to Priority1 low */
+#define	ETH_EDSCP2P1H(n) ETH__GEN(n, EDSCP1P1H)	/* IP Differentiated Services
+						   CodePoint to Priority1 high*/
+#define	ETH_EVPT2P(n)	ETH__GEN(n, EVPT2P)	/* VLAN Prio. Tag to Priority */
+#define	ETH_EMIBCTRS(n) ETH__GEN(n, EMIBCTRS)	/* MIB Counters */
+
+#define	ETH_EPAR_PhyAD_GET(v, n)	(((v) >> ((n) * 5)) & 0x1f)
+
+#define ETH_ESMIR_READ(phy, reg)	(ETH__INS(phy, 16)|\
+					 ETH__INS(reg, 21)|\
+					 ETH_ESMIR_ReadOpcode)
+#define ETH_ESMIR_WRITE(phy, reg, val)	(ETH__INS(phy, 16)|\
+					 ETH__INS(reg, 21)|\
+					 ETH__INS(val,  0)|\
+					 ETH_ESMIR_WriteOpcode)
+#define ETH_ESMIR_Value_GET(v)		ETH__EXT(v, 0, 16)
+#define	ETH_ESMIR_WriteOpcode		0
+#define	ETH_ESMIR_ReadOpcode		ETH__BIT(26)
+#define	ETH_ESMIR_ReadValid		ETH__BIT(27)
+#define	ETH_ESMIR_Busy			ETH__BIT(28)
+
+/* 
+ * Table 597: Port Configuration Register (PCR)
+ * 00:00 PM			Promiscuous mode
+ *				0: Normal mode (Frames are only received if the
+ *				   destination address is found in the hash
+ *				   table)
+ *				1: Promiscuous mode (Frames are received
+ *				   regardless of their destination address.
+ *				   Errored frames are discarded unless the Port
+ *				   Configuration register's PBF bit is set)
+ * 01:01 RBM			Reject Broadcast Mode
+ *				0: Receive broadcast address
+ *				1: Reject frames with broadcast address
+ *				Overridden by the promiscuous mode.
+ * 02:02 PBF			Pass Bad Frames
+ *				(0: Normal mode, 1: Pass bad Frames)
+ *				The Ethernet receiver passes to the CPU errored
+ *				frames (like fragments and collided packets)
+ *				that are normally rejected.
+ *				NOTE: Frames are only passed if they
+ *				      successfully pass address filtering.
+ * 06:03 Reserved
+ * 07:07 EN			Enable (0: Disabled, 1: Enable)
+ *				When enabled, the ethernet port is ready to
+ *				transmit/receive.
+ * 09:08 LPBK			Loop Back Mode
+ *				00: Normal mode
+ *				01: Internal loop back mode (TX data is looped
+ *				    back to the RX lines. No transition is seen
+ *				    on the interface pins)
+ *				10: External loop back mode (TX data is looped
+ *				    back to the RX lines and also transmitted
+ *				    out to the MII interface pins)
+ *				11: Reserved
+ * 10:10 FC			Force Collision
+ *				0: Normal mode.
+ *				1: Force Collision on any TX frame.
+ *				   For RXM test (in Loopback mode).
+ * 11:11 Reserved.
+ * 12:12 HS			Hash Size
+ *				0: 8K address filtering
+ *				   (256KB of memory space required).
+ *				1: 512 address filtering
+ *				   ( 16KB of memory space required).
+ * 13:13 HM			Hash Mode (0: Hash Func. 0; 1: Hash Func. 1)
+ * 14:14 HDM			Hash Default Mode
+ *				0: Discard addresses not found in address table
+ *				1: Pass addresses not found in address table
+ * 15:15 HD			Duplex Mode (0: Half Duplex, 1: Full Duplex)
+ *				NOTE: Valid only when auto-negotiation for
+ *				      duplex mode is disabled.
+ * 30:16 Reserved
+ * 31:31 ACCS			Accelerate Slot Time
+ *				(0: Normal mode, 1: Reserved)
+ */
+#define	ETH_EPCR_PM		ETH__BIT(0)
+#define	ETH_EPCR_RBM		ETH__BIT(1)
+#define	ETH_EPCR_PBF		ETH__BIT(2)
+#define	ETH_EPCR_EN		ETH__BIT(7)
+#define	ETH_EPCR_LPBK_GET(v)	ETH__BIT(v, 8, 2)
+#define	ETH_EPCR_LPBK_Normal	0
+#define	ETH_EPCR_LPBK_Internal	1
+#define	ETH_EPCR_LPBK_External	2
+#define	ETH_EPCR_FC		ETH__BIT(10)
+
+#define	ETH_EPCR_HS		ETH__BIT(12)
+#define	ETH_EPCR_HS_8K		0
+#define	ETH_EPCR_HS_512		ETH_EPCR_HS
+
+#define	ETH_EPCR_HM		ETH__BIT(13)
+#define	ETH_EPCR_HM_0		0
+#define	ETH_EPCR_HM_1		ETH_EPCR_HM
+
+#define	ETH_EPCR_HDM		ETH__BIT(14)
+#define	ETH_EPCR_HDM_Discard	0
+#define	ETH_EPCR_HDM_Pass	ETH_EPCR_HDM
+
+#define	ETH_EPCR_HD_Half	0
+#define	ETH_EPCR_HD_Full	ETH_EPCR_HD_Full
+
+#define	ETH_EPCR_ACCS		ETH__BIT(31)
+
+
+
+/* 
+ * Table 598: Port Configuration Extend Register (PCXR)
+ * 00:00 IGMP			IGMP Packets Capture Enable
+ *				0: IGMP packets are treated as normal Multicast
+ *				   packets.
+ *				1: IGMP packets on IPv4/Ipv6 over Ethernet/802.3
+ *				   are trapped and sent to high priority RX
+ *				   queue.
+ * 01:01 SPAN			Spanning Tree Packets Capture Enable
+ *				0: BPDU (Bridge Protocol Data Unit) packets are
+ *				   treated as normal Multicast packets.
+ *				1: BPDU packets are trapped and sent to high
+ *				   priority RX queue.
+ * 02:02 PAR			Partition Enable (0: Normal, 1: Partition)
+ *				When more than 61 collisions occur while
+ *				transmitting, the port enters Partition mode.
+ *				It waits for the first good packet from the
+ *				wire and then goes back to Normal mode.  Under
+ *				Partition mode it continues transmitting, but
+ *				it does not receive.
+ * 05:03 PRIOtx			Priority weight in the round-robin between high
+ *				and low priority TX queues.
+ *				000: 1 pkt from HIGH, 1 pkt from LOW.
+ *				001: 2 pkt from HIGH, 1 pkt from LOW.
+ *				010: 4 pkt from HIGH, 1 pkt from LOW.
+ *				011: 6 pkt from HIGH, 1 pkt from LOW.
+ *				100: 8 pkt from HIGH, 1 pkt from LOW.
+ *				101: 10 pkt from HIGH, 1 pkt from LOW.
+ *				110: 12 pkt from HIGH, 1 pkt from LOW.
+ *				111: All pkt from HIGH, 0 pkt from LOW. LOW is
+ *				     served only if HIGH is empty.
+ *				NOTE: If the HIGH queue is emptied before
+ *				      finishing the count, the count is reset
+ *				      until the next first HIGH comes in.
+ * 07:06 PRIOrx			Default Priority for Packets Received on this
+ *				Port (00: Lowest priority, 11: Highest priority)
+ * 08:08 PRIOrx_Override	Override Priority for Packets Received on this
+ *				Port (0: Do not override, 1: Override with
+ *				<PRIOrx> field)
+ * 09:09 DPLXen			Enable Auto-negotiation for Duplex Mode
+ *				(0: Enable, 1: Disable)
+ * 11:10 FCTLen			Enable Auto-negotiation for 802.3x Flow-control
+ *				0: Enable; When enabled, 1 is written (through
+ *				   SMI access) to the PHY's register 4 bit 10
+ *				   to advertise flow-control capability.
+ *				1: Disable; Only enables flow control after the
+ *				   PHY address is set by the CPU. When changing
+ *				   the PHY address the flow control
+ *				   auto-negotiation must be disabled.
+ * 11:11 FLP			Force Link Pass
+ *				(0: Force Link Pass, 1: Do NOT Force Link pass)
+ * 12:12 FCTL			802.3x Flow-Control Mode (0: Enable, 1: Disable)
+ *				NOTE: Only valid when auto negotiation for flow
+ *				      control is disabled.
+ * 13:13 Reserved
+ * 15:14 MFL			Max Frame Length
+ *				Maximum packet allowed for reception (including
+ *				CRC):   00: 1518 bytes,   01: 1536 bytes,
+ *					10: 2048 bytes,   11:  64K bytes
+ * 16:16 MIBclrMode		MIB Counters Clear Mode (0: Clear, 1: No effect)
+ * 17:17 MIBctrMode		Reserved. (MBZ)
+ * 18:18 Speed			Port Speed (0: 10Mbit/Sec, 1: 100Mbit/Sec)
+ *				NOTE: Only valid if SpeedEn bit is set.
+ * 19:19 SpeedEn		Enable Auto-negotiation for Speed
+ *				(0: Enable, 1: Disable)
+ * 20:20 RMIIen			RMII enable
+ *				0: Port functions as MII port
+ *				1: Port functions as RMII port
+ * 21:21 DSCPen			DSCP enable
+ *				0: IP DSCP field decoding is disabled.
+ *				1: IP DSCP field decoding is enabled.
+ * 31:22 Reserved
+ */
+#define	ETH_EPCXR_IGMP			ETH__BIT(0)
+#define	ETH_EPCXR_SPAN			ETH__BIT(1)
+#define	ETH_EPCXR_PAR			ETH__BIT(2)
+#define	ETH_EPCXR_PRIOtx_GET(v)		ETH__EXT(v, 3, 3)
+#define	ETH_EPCXR_PRIOrx_GET(v)		ETH__EXT(v, 3, 3)
+#define	ETH_EPCXR_PRIOrx_Override	ETH__BIT(8)
+#define	ETH_EPCXR_DLPXen		ETH__BIT(9)
+#define	ETH_EPCXR_FCTLen		ETH__BIT(10)
+#define	ETH_EPCXR_FLP			ETH__BIT(11)
+#define	ETH_EPCXR_FCTL			ETH__BIT(12)
+#define	ETH_EPCXR_MFL_GET(v)		ETH__EXT(v, 14, 2)
+#define	ETH_EPCXR_MFL_1518		0
+#define	ETH_EPCXR_MFL_1536		1
+#define	ETH_EPCXR_MFL_2048		2
+#define	ETH_EPCXR_MFL_64K		3
+#define	ETH_EPCXR_MIBclrMode		ETH__BIT(16)
+#define	ETH_EPCXR_MIBctrMode		ETH__BIT(17)
+#define	ETH_EPCXR_Speed			ETH__BIT(18)
+#define	ETH_EPCXR_SpeedEn		ETH__BIT(19)
+#define	ETH_EPCXR_RMIIEn		ETH__BIT(20)
+#define	ETH_EPCXR_DSCPEn		ETH__BIT(21)
+
+
+
+/* 
+ * Table 599: Port Command Register (PCMR)
+ * 14:00 Reserved
+ * 15:15 FJ			Force Jam / Flow Control
+ *				When in half-duplex mode, the CPU uses this bit
+ *				to force collisions on the Ethernet segment.
+ *				When the CPU recognizes that it is going to run
+ *				out of receive buffers, it can force the
+ *				transmitter to send jam frames, forcing
+ *				collisions on the wire.  To allow transmission
+ *				on the Ethernet segment, the CPU must clear the
+ *				FJ bit when more resources are available.  When
+ *				in full-duplex and flow-control is enabled, this
+ *				bit causes the port's transmitter to send
+ *				flow-control PAUSE packets. The CPU must reset
+ *				this bit when more resources are available.
+ * 31:16 Reserved
+ */
+
+#define	ETH_EPCMR_FJ		ETH__BIT(15)
+
+
+/* 
+ * Table 600: Port Status Register (PSR) -- Read Only
+ * 00:00 Speed			Indicates Port Speed (0: 10Mbs, 1: 100Mbs)
+ * 01:01 Duplex			Indicates Port Duplex Mode (0: Half, 1: Full)
+ * 02:02 Fctl			Indicates Flow-control Mode
+ *				(0: enabled, 1: disabled)
+ * 03:03 Link			Indicates Link Status (0: down, 1: up)
+ * 04:04 Pause			Indicates that the port is in flow-control
+ *				disabled state.  This bit is set when an IEEE
+ *				802.3x flow-control PAUSE (XOFF) packet is
+ *				received (assuming that flow-control is
+ *				enabled and the port is in full-duplex mode).
+ *				Reset when XON is received, or when the XOFF
+ *				timer has expired.
+ * 05:05 TxLow			Tx Low Priority Status
+ *				Indicates the status of the low priority
+ *				transmit queue: (0: Stopped, 1: Running)
+ * 06:06 TxHigh			Tx High Priority Status
+ *				Indicates the status of the high priority
+ *				transmit queue: (0: Stopped, 1: Running)
+ * 07:07 TXinProg		TX in Progress
+ *				Indicates that the port's transmitter is in an
+ *				active transmission state.
+ * 31:08 Reserved
+ */
+#define	ETH_EPSR_Speed		ETH__BIT(0)
+#define	ETH_EPSR_Duplex		ETH__BIT(1)
+#define	ETH_EPSR_Fctl		ETH__BIT(2)
+#define	ETH_EPSR_Link		ETH__BIT(3)
+#define	ETH_EPSR_Pause		ETH__BIT(4)
+#define	ETH_EPSR_TxLow		ETH__BIT(5)
+#define	ETH_EPSR_TxHigh		ETH__BIT(6)
+#define	ETH_EPSR_TXinProg	ETH__BIT(7)
+
+
+/* 
+ * Table 601: Serial Parameters Register (SPR)
+ * 01:00 JAM_LENGTH		Two bits to determine the JAM Length
+ *				(in Backpressure) as follows:
+ *					00 = 12K bit-times
+ *					01 = 24K bit-times
+ *					10 = 32K bit-times
+ *					11 = 48K bit-times
+ * 06:02 JAM_IPG		Five bits to determine the JAM IPG.
+ *				The step is four bit-times. The value may vary
+ *				between 4 bit time to 124.
+ * 11:07 IPG_JAM_TO_DATA	Five bits to determine the IPG JAM to DATA.
+ *				The step is four bit-times. The value may vary
+ *				between 4 bit time to 124.
+ * 16:12 IPG_DATA		Inter-Packet Gap (IPG)
+ *				The step is four bit-times. The value may vary
+ *				between 12 bit time to 124.
+ *				NOTE: These bits may be changed only when the
+ *				      Ethernet ports is disabled.
+ * 21:17 Data_Blind		Data Blinder
+ *				The number of nibbles from the beginning of the
+ *				IPG, in which the IPG counter is restarted when
+ *				detecting a carrier activity.  Following this
+ *				value, the port enters the Data Blinder zone and
+ *				does not reset the IPG counter. This ensures
+ *				fair access to the medium.
+ *				The default is 10 hex (64 bit times - 2/3 of the
+ *				default IPG).  The step is 4 bit-times. Valid
+ *				range is 3 to 1F hex nibbles.
+ *				NOTE: These bits may be only changed when the
+ *				      Ethernet port is disabled.
+ * 22:22 Limit4			The number of consecutive packet collisions that
+ *				occur before the collision counter is reset.
+ *				  0: The port resets its collision counter after
+ *				     16 consecutive retransmit trials and
+ *				     restarts the Backoff algorithm.
+ *				  1: The port resets its collision counter and
+ *				     restarts the Backoff algorithm after 4
+ *				     consecutive transmit trials.
+ * 31:23 Reserved
+ */
+#define	ETH_ESPR_JAM_LENGTH_GET(v)	ETH__EXT(v, 0, 2)
+#define	ETH_ESPR_JAM_IPG_GET(v)		ETH__EXT(v, 2, 5)
+#define	ETH_ESPR_IPG_JAM_TO_DATA_GET(v)	ETH__EXT(v, 7, 5)
+#define	ETH_ESPR_IPG_DATA_GET(v)	ETH__EXT(v, 12, 5)
+#define	ETH_ESPR_Data_Bilnd_GET(v)	ETH__EXT(v, 17, 5)
+#define	ETH_ESPR_Limit4(v)		ETH__BIT(22)
+
+/* 
+ * Table 602: Hash Table Pointer Register (HTPR)
+ * 31:00 HTP			32-bit pointer to the address table.
+ *				Bits [2:0] must be set to zero.
+ */
+
+/* 
+ * Table 603: Flow Control Source Address Low (FCSAL)
+ * 15:0 SA[15:0]		Source Address
+ *				The least significant bits of the source
+ *				address for the port.  This address is used for
+ *				Flow Control.
+ * 31:16 Reserved
+ */
+
+/* 
+ * Table 604: Flow Control Source Address High (FCSAH)
+ * 31:0 SA[47:16]		Source Address
+ *				The most significant bits of the source address
+ *				for the port.  This address is used for Flow
+ *				Control.
+ */
+
+
+/* 
+ * Table 605: SDMA Configuration Register (SDCR)
+ * 01:00 Reserved
+ * 05:02 RC			Retransmit Count
+ *				Sets the maximum number of retransmits per
+ *				packet.  After executing retransmit for RC
+ *				times, the TX SDMA closes the descriptor with a
+ *				Retransmit Limit error indication and processes
+ *				the next packet.  When RC is set to 0, the
+ *				number of retransmits is unlimited. In this
+ *				case, the retransmit process is only terminated
+ *				if CPU issues an Abort command.
+ * 06:06 BLMR			Big/Little Endian Receive Mode
+ *				The DMA supports Big or Little Endian
+ *				configurations on a per channel basis. The BLMR
+ *				bit only affects data transfer to memory.
+ *					0: Big Endian
+ *					1: Little Endian
+ * 07:07 BLMT			Big/Little Endian Transmit Mode
+ *				The DMA supports Big or Little Endian
+ *				configurations on a per channel basis. The BLMT
+ *				bit only affects data transfer from memory.
+ *					0: Big Endian
+ *					1: Little Endian
+ * 08:08 POVR			PCI Override
+ *				When set, causes the SDMA to direct all its
+ *				accesses in PCI_0 direction and overrides
+ *				normal address decoding process.
+ * 09:09 RIFB			Receive Interrupt on Frame Boundaries
+ *				When set, the SDMA Rx generates interrupts only
+ *				on frame boundaries (i.e. after writing the
+ *				frame status to the descriptor).
+ * 11:10 Reserved
+ * 13:12 BSZ			Burst Size
+ *				Sets the maximum burst size for SDMA
+ *				transactions:
+ *					00: Burst is limited to 1 64bit words.
+ *					01: Burst is limited to 2 64bit words.
+ *					10: Burst is limited to 4 64bit words.
+ *					11: Burst is limited to 8 64bit words.
+ * 31:14 Reserved
+ */
+#define	ETH_ESDCR_RC_GET(v)		ETH__EXT(v, 2, 4)
+#define	ETH_ESDCR_BLMR			ETH__BIT(6)
+#define	ETH_ESDCR_BLMT			ETH__BIT(7)
+#define	ETH_ESDCR_POVR			ETH__BIT(8)
+#define	ETH_ESDCR_RIFB			ETH__BIT(9)
+#define	ETH_ESDCR_BSZ_GET(v)		ETH__EXT(v, 12, 2)
+#define	ETH_ESDCR_BSZ_SET(v, n)		(ETH__CLR(v, 12, 2),\
+					 (v) |= ETH__INS(n, 12))
+#define	ETH_ESDCR_BSZ_1			0
+#define	ETH_ESDCR_BSZ_2			1
+#define	ETH_ESDCR_BSZ_4			2
+#define	ETH_ESDCR_BSZ_8			3
+
+#define	ETH_ESDCR_BSZ_Strings		{ "1 64-bit word", "2 64-bit words", \
+					  "4 64-bit words", "8 64-bit words" }
+
+/* 
+ * Table 606: SDMA Command Register (SDCMR)
+ * 06:00 Reserved
+ * 07:07 ERD			Enable RX DMA.
+ *				Set to 1 by the CPU to cause the SDMA to start
+ *				a receive process.  Cleared when the CPU issues
+ *				an Abort Receive command.
+ * 14:08 Reserved
+ * 15:15 AR			Abort Receive
+ *				Set to 1 by the CPU to abort a receive SDMA
+ *				operation.  When the AR bit is set, the SDMA
+ *				aborts its current operation and moves to IDLE.
+ *				No descriptor is closed.  The AR bit is cleared
+ *				upon entering IDLE.  After setting the AR bit,
+ *				the CPU must poll the bit to verify that the
+ *				abort sequence is completed.
+ * 16:16 STDH			Stop TX High
+ *				Set to 1 by the CPU to stop the transmission
+ *				process from the high priority queue at the end
+ *				of the current frame. An interrupt is generated
+ *				when the stop command has been executed.
+ *				  Writing 1 to STDH resets TXDH bit.
+ *				  Writing 0 to this bit has no effect.
+ * 17:17 STDL			Stop TX Low
+ *				Set to 1 by the CPU to stop the transmission
+ *				process from the low priority queue at the end
+ *				of the current frame. An interrupt is generated
+ *				when the stop command has been executed.
+ *				  Writing 1 to STDL resets TXDL bit.
+ *				  Writing 0 to this bit has no effect.
+ * 22:18 Reserved
+ * 23:23 TXDH			Start Tx High
+ *				Set to 1 by the CPU to cause the SDMA to fetch
+ *				the first descriptor and start a transmit
+ *				process from the high priority Tx queue.
+ *				  Writing 1 to TXDH resets STDH bit.
+ *				  Writing 0 to this bit has no effect.
+ * 24:24 TXDL			Start Tx Low
+ *				Set to 1 by the CPU to cause the SDMA to fetch
+ *				the first descriptor and start a transmit
+ *				process from the low priority Tx queue.
+ *				  Writing 1 to TXDL resets STDL bit.
+ *				  Writing 0 to this bit has no effect.
+ * 30:25 Reserved
+ * 31:31 AT			Abort Transmit
+ *				Set to 1 by the CPU to abort a transmit DMA
+ *				operation.  When the AT bit is set, the SDMA
+ *				aborts its current operation and moves to IDLE.
+ *				No descriptor is closed.  Cleared upon entering
+ *				IDLE.  After setting AT bit, the CPU must poll
+ *				it in order to verify that the abort sequence
+ *				is completed.
+ */
+#define	ETH_ESDCMR_ERD			ETH__BIT(7)
+#define	ETH_ESDCMR_AR			ETH__BIT(15)
+#define	ETH_ESDCMR_STDH			ETH__BIT(16)
+#define	ETH_ESDCMR_STDL			ETH__BIT(17)
+#define	ETH_ESDCMR_TXDH			ETH__BIT(23)
+#define	ETH_ESDCMR_TXDL			ETH__BIT(24)
+#define	ETH_ESDCMR_AT			ETH__BIT(31)
+
+/* 
+ * Table 607: Interrupt Cause Register (ICR)
+ * 00:00 RxBuffer		Rx Buffer Return
+ *				Indicates an Rx buffer returned to CPU ownership
+ *				or that the port finished reception of a Rx
+ *				frame in either priority queues.
+ *				NOTE: In order to get a Rx Buffer return per
+ *				      priority queue, use bit 19:16. This bit is
+ *				      set upon closing any Rx descriptor which
+ *				      has its EI bit set. To limit the
+ *				      interrupts to frame (rather than buffer)
+ *				      boundaries, the user must set SDMA
+ *				      Configuration register's RIFB bit. When
+ *				      the RIFB bit is set, an interrupt
+ *				      generates only upon closing the first
+ *				      descriptor of a received packet, if this
+ *				      descriptor has it EI bit set.
+ * 01:01 Reserved
+ * 02:02 TxBufferHigh		Tx Buffer for High priority Queue
+ *				Indicates a Tx buffer returned to CPU ownership
+ *				or that the port finished transmission of a Tx
+ *				frame.
+ *				NOTE: This bit is set upon closing any Tx
+ *				      descriptor which has its EI bit set. To
+ *				      limit the interrupts to frame (rather than
+ *				      buffer) boundaries, the user must set EI
+ *				      only in the last descriptor.
+ * 03:03 TxBufferLow		Tx Buffer for Low Priority Queue
+ *				Indicates a Tx buffer returned to CPU ownership
+ *				or that the port finished transmission of a Tx
+ *				frame.
+ *				NOTE: This bit is set upon closing any Tx
+ *				      descriptor which has its EI bit set. To
+ *				      limit the interrupts to frame (rather than
+ *				      buffer) boundaries, the user must set EI
+ *				      only in the last descriptor.
+ * 05:04 Reserved
+ * 06:06 TxEndHigh		Tx End for High Priority Queue
+ *				Indicates that the Tx DMA stopped processing the
+ *				high priority queue after stop command, or that
+ *				it reached the end of the high priority
+ *				descriptor chain.
+ * 07:07 TxEndLow		Tx End for Low Priority Queue
+ *				Indicates that the Tx DMA stopped processing the
+ *				low priority queue after stop command, or that
+ *				it reached the end of the low priority
+ *				descriptor chain.
+ * 08:08 RxError		Rx Resource Error
+ *				Indicates a Rx resource error event in one of
+ *				the priority queues.
+ *				NOTE: To get a Rx Resource Error Indication per
+ *				      priority queue, use bit 23:20.
+ * 09:09 Reserved
+ * 10:10 TxErrorHigh		Tx Resource Error for High Priority Queue
+ *				Indicates a Tx resource error event during
+ *				packet transmission from the high priority queue
+ * 11:11 TxErrorLow		Tx Resource Error for Low Priority Queue
+ *				Indicates a Tx resource error event during
+ *				packet transmission from the low priority queue
+ * 12:12 RxOVR			Rx Overrun
+ *				Indicates an overrun event that occurred during
+ *				reception of a packet.
+ * 13:13 TxUdr			Tx Underrun
+ *				Indicates an underrun event that occurred during
+ *				transmission of packet from either queue.
+ * 15:14 Reserved
+ * 16:16 RxBuffer-Queue[0]	Rx Buffer Return in Priority Queue[0]
+ *				Indicates a Rx buffer returned to CPU ownership
+ *				or that the port completed reception of a Rx
+ *				frame in a receive priority queue[0]
+ * 17:17 RxBuffer-Queue[1]	Rx Buffer Return in Priority Queue[1]
+ *				Indicates a Rx buffer returned to CPU ownership
+ *				or that the port completed reception of a Rx
+ *				frame in a receive priority queue[1].
+ * 18:18 RxBuffer-Queue[2]	Rx Buffer Return in Priority Queue[2]
+ *				Indicates a Rx buffer returned to CPU ownership
+ *				or that the port completed reception of a Rx
+ *				frame in a receive priority queue[2].
+ * 19:19 RxBuffer-Queue[3]	Rx Buffer Return in Priority Queue[3]
+ *				Indicates a Rx buffer returned to CPU ownership
+ *				or that the port completed reception of a Rx
+ *				frame in a receive priority queue[3].
+ * 20:20 RxError-Queue[0]	Rx Resource Error in Priority Queue[0]
+ *				Indicates a Rx resource error event in receive
+ *				priority queue[0].
+ * 21:21 RxError-Queue[1]	Rx Resource Error in Priority Queue[1]
+ *				Indicates a Rx resource error event in receive
+ *				priority queue[1].
+ * 22:22 RxError-Queue[2]	Rx Resource Error in Priority Queue[2]
+ *				Indicates a Rx resource error event in receive
+ *				priority queue[2].
+ * 23:23 RxError-Queue[3]	Rx Resource Error in Priority Queue[3]
+ *				Indicates a Rx resource error event in receive
+ *				priority queue[3].
+ * 27:24 Reserved
+ * 28:29 MIIPhySTC		MII PHY Status Change
+ *				Indicates a status change reported by the PHY
+ *				connected to this port.  Set when the MII
+ *				management interface block identifies a change
+ *				in PHY's register 1.
+ * 29:29 SMIdone		SMI Command Done
+ *				Indicates that the SMI completed a MII
+ *				management command (either read or write) that
+ *				was initiated by the CPU writing to the SMI
+ *				register.
+ * 30:30 Reserved
+ * 31:31 EtherIntSum		Ethernet Interrupt Summary
+ *				This bit is a logical OR of the (unmasked) bits
+ *				[30:04] in the Interrupt Cause register.
+ */
+
+#define	ETH_IR_RxBuffer		ETH__BIT(0)
+#define	ETH_IR_TxBufferHigh	ETH__BIT(2)
+#define	ETH_IR_TxBufferLow	ETH__BIT(3)
+#define	ETH_IR_TxEndHigh	ETH__BIT(6)
+#define	ETH_IR_TxEndLow		ETH__BIT(7)
+#define	ETH_IR_RxError		ETH__BIT(8)
+#define	ETH_IR_TxErrorHigh	ETH__BIT(10)
+#define	ETH_IR_TxErrorLow	ETH__BIT(11)
+#define	ETH_IR_RxOVR		ETH__BIT(12)
+#define	ETH_IR_TxUdr		ETH__BIT(13)
+#define	ETH_IR_RxBuffer_0	ETH__BIT(16)
+#define	ETH_IR_RxBuffer_1	ETH__BIT(17)
+#define	ETH_IR_RxBuffer_2	ETH__BIT(18)
+#define	ETH_IR_RxBuffer_3	ETH__BIT(19)
+#define	ETH_IR_RxBuffer_GET(v)	ETH__EXT(v, 16, 4)
+#define	ETH_IR_RxError_0	ETH__BIT(20)
+#define	ETH_IR_RxError_1	ETH__BIT(21)
+#define	ETH_IR_RxError_2	ETH__BIT(22)
+#define	ETH_IR_RxError_3	ETH__BIT(23)
+#define	ETH_IR_RxError_GET(v)	ETH__EXT(v, 20, 4)
+#define	ETH_IR_RxBits		(ETH_IR_RxBuffer_0|\
+				 ETH_IR_RxBuffer_1|\
+				 ETH_IR_RxBuffer_2|\
+				 ETH_IR_RxBuffer_3|\
+				 ETH_IR_RxError_0|\
+				 ETH_IR_RxError_1|\
+				 ETH_IR_RxError_2|\
+				 ETH_IR_RxError_3)
+#define	ETH_IR_MIIPhySTC	 ETH__BIT(28)
+#define	ETH_IR_SMIdone		 ETH__BIT(29)
+#define	ETH_IR_EtherIntSum	 (1<<31)
+#define	ETH_IR_Summary		 (1<<31)
+#define ETH_IR_ErrorSum          0x803d00
+#define INTR_RX_ERROR            0x801100
+#define INTR_TX_ERROR            0x002c00
+
+/* 
+ * Table 608: Interrupt Mask Register (IMR)
+ * 31:00 Various		Mask bits for the Interrupt Cause register.
+ */
+
+/* 
+ * Table 609: IP Differentiated Services CodePoint to Priority0 low (DSCP2P0L),
+ * 31:00 Priority0_low		The LSB priority bits for DSCP[31:0] entries.
+ */
+
+/* 
+ * Table 610: IP Differentiated Services CodePoint to Priority0 high (DSCP2P0H)
+ * 31:00 Priority0_high		The LSB priority bits for DSCP[63:32] entries.
+ */
+
+/* 
+ * Table 611: IP Differentiated Services CodePoint to Priority1 low (DSCP2P1L)
+ * 31:00 Priority1_low		The MSB priority bits for DSCP[31:0] entries.
+ */
+
+/* 
+ * Table 612: IP Differentiated Services CodePoint to Priority1 high (DSCP2P1H)
+ * 31:00 Priority1_high		The MSB priority bit for DSCP[63:32] entries.
+ */
+
+/* 
+ * Table 613: VLAN Priority Tag to Priority (VPT2P)
+ * 07:00 Priority0		The LSB priority bits for VLAN Priority[7:0]
+ *				entries.
+ * 15:08 Priority1		The MSB priority bits for VLAN Priority[7:0]
+ *				entries.
+ * 31:16 Reserved
+ */
+#endif /* _DEV_GTETHREG_H_ */
Index: c/src/lib/libbsp/powerpc/mvme5500/network/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/network/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/network/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,43 @@
+##
+## $Id$
+##
+
+VPATH = @srcdir@:
+
+INCLUDES = -I @srcdir@/../GT64260
+
+C_FILES = GT64260eth.c 
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = GT64260eth.h GT64260ethreg.h
+
+H_FILES = GT64260eth.h GT64260ethreg.h
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = GT64260eth.c 
+
+OBJS = $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $<
+
+$(PROJECT_INCLUDE)/bsp/GT64260eth.h: GT64260eth.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/GT64260ethreg.h: GT64260ethreg.h
+	$(INSTALL_DATA) $< $@
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/GT64260eth.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/GT64260ethreg.h
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/network/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/network/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/network/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,594 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+INCLUDES = -I @srcdir@/../GT64260
+
+C_FILES = GT64260eth.c 
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = GT64260eth.h GT64260ethreg.h
+
+H_FILES = GT64260eth.h GT64260ethreg.h
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = GT64260eth.c 
+
+OBJS = $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/GT64260eth.h $(PROJECT_INCLUDE)/bsp/GT64260ethreg.h
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = network
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_bsp_HEADERS)
+
+DIST_COMMON = $(include_bsp_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  network/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+include_bspHEADERS_INSTALL = $(INSTALL_HEADER)
+install-include_bspHEADERS: $(include_bsp_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f"; \
+	  $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+uninstall-include_bspHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(include_bspdir)/$$f"; \
+	  rm -f $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-include_bspHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-include_bspHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic clean-local ctags distclean distclean-generic \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-include_bspHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-include_bspHEADERS uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $<
+
+$(PROJECT_INCLUDE)/bsp/GT64260eth.h: GT64260eth.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/GT64260ethreg.h: GT64260ethreg.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,35 @@
+##
+## Makefile.am,v 1.6 2002/05/14 17:10:16 joel Exp
+##
+
+VPATH = @srcdir@:
+
+INCLUDES = -I @srcdir@/../pci
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS =  gtpcireg.h pci.h
+H_FILES = gtpcireg.h pci.h
+
+C_FILES = pci.c pci_interface.c detect_host_bridge.c pcifinddevice.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+EXTRA_DIST = pci.c pci_interface.c detect_host_bridge.c pcifinddevice.c
+
+OBJS = $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/gtpcireg.h: gtpcireg.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/pci.h: pci.h
+	$(INSTALL_DATA) $< $@
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/pci.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/gtpcireg.h
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,586 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+INCLUDES = -I @srcdir@/../pci
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = gtpcireg.h pci.h
+H_FILES = gtpcireg.h pci.h
+
+C_FILES = pci.c pci_interface.c detect_host_bridge.c pcifinddevice.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+EXTRA_DIST = pci.c pci_interface.c detect_host_bridge.c pcifinddevice.c
+
+OBJS = $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/pci.h $(PROJECT_INCLUDE)/bsp/gtpcireg.h
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = pci
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_bsp_HEADERS)
+
+DIST_COMMON = $(include_bsp_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  pci/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+include_bspHEADERS_INSTALL = $(INSTALL_HEADER)
+install-include_bspHEADERS: $(include_bsp_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f"; \
+	  $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+uninstall-include_bspHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(include_bspdir)/$$f"; \
+	  rm -f $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-include_bspHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-include_bspHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic clean-local ctags distclean distclean-generic \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-include_bspHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-include_bspHEADERS uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/gtpcireg.h: gtpcireg.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/pci.h: pci.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/detect_host_bridge.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/detect_host_bridge.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/detect_host_bridge.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,72 @@
+/*
+ * detect_host_bridge.c
+ *
+ * This code is inspired by detect_grackle_bridge.c of SVGM BSP
+ * written by Till Straumann
+ * Copyright (C) 2001, 2003 Till Straumann <strauman@slac.stanford.edu>
+ * 
+ * Copyright (C) 2004 S. Kate Feng, <feng1@bnl.gov>
+ * wrote it to support the MVME5500 board.
+ * 
+ */
+#include <libcpu/io.h>
+#include <rtems/bspIo.h>	    /* printk */
+
+#include <bsp/pci.h>
+#include <bsp/gtreg.h>
+#include <bsp/gtpcireg.h> 
+
+#include <stdio.h>
+#include <string.h>
+
+#define PCI_DEBUG 0
+
+#define PCI_INVALID_VENDORDEVICEID	0xffffffff
+#define PCI_MULTI_FUNCTION		0x80
+#define HOSTBRIDGET_ERROR               0xf0000000
+
+unsigned long _BSP_clear_hostbridge_errors(int enableMCP, int quiet)
+{
+  unsigned int pcidata, pcidata1;
+  int PciNumber;
+  
+  /* On the mvme5500 board, the GT64260B system controller had the MCP
+   * signal pulled up high.  Thus, the MCP signal is not used as it is
+   * on other boards such as mvme2307.
+   */
+  if (enableMCP) return(-1);
+  for (PciNumber=0; PciNumber<1; PciNumber++) {
+     PCIx_read_config_dword(PciNumber, 0,
+			0,
+			0,
+		PCI0_COMMAND+(PciNumber * 0x80),
+                        &pcidata); 
+
+    if (!quiet)
+    printk("Before _BSP_clear_hostbridge_errors(): 0x%x, cause 0x%x\n", 
+	   pcidata, inl(0x1d58));
+
+    outl(0,0x1d58);
+
+    /* Clear the error on the host bridge */
+    pcidata1= pcidata;
+    pcidata1 |= PCI_STATUS_CLRERR_MASK;
+    pcidata1 |= 0x140; 
+    PCIx_write_config_dword(PciNumber, 0,
+ 			       0,
+			       0,
+			  PCI0_COMMAND+(PciNumber * 0x80),
+                          pcidata1);
+
+    PCIx_read_config_dword(PciNumber, 0,
+			       0,
+			       0,
+			  PCI0_COMMAND+(PciNumber * 0x80),
+                          &pcidata1); 
+
+    if (!quiet) printk("After _BSP_clear_hostbridge_errors(): sts 0x%x\n", 
+                        pcidata1);
+    if (pcidata1 & HOSTBRIDGET_ERROR) printk("BSP_clear_hostbridge_errors(): unable to clear pending hostbridge errors\n");
+  }
+  return(pcidata &  HOSTBRIDGET_ERROR);
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/gtpcireg.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/gtpcireg.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/gtpcireg.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,91 @@
+/*	$NetBSD: gtpcireg.h,v 1.2 2003/03/24 17:03:18 matt Exp $	*/
+
+/*
+ * Copyright (c) 2002 Allegro Networks, Inc., Wasabi Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software developed for the NetBSD Project by
+ *      Allegro Networks, Inc., and Wasabi Systems, Inc.
+ * 4. The name of Allegro Networks, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ * 5. The name of Wasabi Systems, Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ALLEGRO NETWORKS, INC. AND
+ * WASABI SYSTEMS, INC. ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL EITHER ALLEGRO NETWORKS, INC. OR WASABI SYSTEMS, INC.
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#define	PCI_ARBCTL_EN	(1<<31)
+
+#define PCI_BARE_IntMemEn     0x200
+
+#define PCI_ACCCTLBASEL_PrefetchEn     0x0001000
+#define PCI_ACCCTLBASEL_RdPrefetch     0x0010000
+#define PCI_ACCCTLBASEL_RdLinePrefetch 0x0020000
+#define PCI_ACCCTLBASEL_RdMulPrefetch  0x0040000
+#define PCI_ACCCTLBASEL_WBurst_8_QW    0x0100000
+#define PCI_ACCCTLBASEL_PCISwap_NoSwap 0x1000000
+
+#define PCI0_P2P_CONFIG                         0x1d14
+#define PCI_SNOOP_BASE0_LOW                     0x1f00                    
+#define PCI_SNOOP_BASE0_HIGH                    0x1f04   
+#define PCI_SNOOP_TOP0                          0x1f08
+
+#define PCI0_SCS0_BAR_SIZE                      0x0c08
+#define PCI0_SCS1_BAR_SIZE                      0x0d08
+#define PCI0_SCS2_BAR_SIZE                      0x0c0c
+#define PCI0_SCS3_BAR_SIZE                      0x0d0c
+
+#define PCI0_BASE_ADDR_REG_ENABLE               0x0c3c
+#define PCI0_ARBITER_CNTL                       0x1d00
+#define PCI0_ACCESS_CNTL_BASE0_LOW              0x1e00
+#define PCI0_ACCESS_CNTL_BASE0_HIGH             0x1e04
+#define PCI0_ACCESS_CNTL_BASE0_TOP              0x1e08
+
+#define PCI0_ACCESS_CNTL_BASE1_LOW              0x1e10
+#define PCI0_ACCESS_CNTL_BASE1_HIGH             0x1e14
+#define PCI0_ACCESS_CNTL_BASE1_TOP              0x1e18
+
+#define PCI1_BASE_ADDR_REG_ENABLE               0x0cbc
+#define PCI1_ARBITER_CNTL                       0x1d80
+#define PCI1_ACCESS_CNTL_BASE0_LOW              0x1e80
+#define PCI1_ACCESS_CNTL_BASE0_HIGH             0x1e84
+#define PCI1_ACCESS_CNTL_BASE0_TOP              0x1e88
+
+#define PCI1_ACCESS_CNTL_BASE1_LOW              0x1e90
+#define PCI1_ACCESS_CNTL_BASE1_HIGH             0x1e94
+#define PCI1_ACCESS_CNTL_BASE1_TOP              0x1e98
+
+#define PCI_SNOOP_BASE1_LOW                     0x1f10                    
+#define PCI_SNOOP_BASE1_HIGH                    0x1f14   
+#define PCI_SNOOP_TOP1                          0x1f18
+
+#define PCI0_CMD_CNTL                           0xc00
+#define PCI0_CONFIG_ADDR			0xcf8
+#define PCI0_CONFIG_DATA			0xcfc
+
+#define PCI1_P2P_CONFIG                         0x1d94
+#define PCI1_CMD_CNTL                           0xc80
+#define PCI1_CONFIG_ADDR			0xc78
+#define PCI1_CONFIG_DATA			0xc7c
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/pci.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/pci.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/pci.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,378 @@
+/*
+ * pci.c :  this file contains basic PCI Io functions.
+ *
+ *  CopyRight (C) 1999 valette@crf.canon.fr
+ *
+ *  This code is heavilly inspired by the public specification of STREAM V2
+ *  that can be found at :
+ *
+ *      <http://www.chorus.com/Documentation/index.html> by following
+ *  the STREAM API Specification Document link.
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  pci.c,v 1.2 2002/05/14 17:10:16 joel Exp
+ *
+ *  Copyright 2004, Brookhaven National Laboratory and
+ *                  Shuchen K. Feng, <feng1@bnl.gov>, 2004
+ *   - modified and added support for MVME5500 board
+ *   - added 2nd PCI support for the mvme5500/GT64260 PCI bridge
+ *
+ */
+#define PCI_MAIN
+
+#include <libcpu/io.h>
+#include <rtems/bspIo.h>	    /* printk */
+
+#include <bsp/pci.h>
+#include <bsp/gtreg.h>
+#include <bsp/gtpcireg.h> 
+
+#include <stdio.h>
+#include <string.h>
+
+#define PCI_DEBUG 0
+#define PCI_PRINT 1
+
+#define PCI_INVALID_VENDORDEVICEID	0xffffffff
+#define PCI_MULTI_FUNCTION		0x80
+#define HOSTBRIDGET_ERROR               0xf0000000
+
+typedef unsigned char unchar;
+
+#define	MAX_NUM_PCI_DEVICES	20
+
+static int		  numPCIDevs=0;
+extern void PCI_interface(), pciAccessInit();
+
+/* Pack RegNum,FuncNum,DevNum,BusNum,and ConfigEnable for
+ * PCI Configuration Address Register
+ */
+#define pciConfigPack(bus,dev,func,offset)\
+(((func&7)<<8)|((dev&0x1f )<<11)|(( bus&0xff)<<16)|(offset&0xfc))|0x80000000
+
+/*
+ * Bit encode for PCI_CONFIG_HEADER_TYPE register
+ */
+unchar ucMaxPCIBus=0;
+
+/* Please note that PCI0 and PCI1 does not correlate with the busNum 0 and 1.
+ */
+int PCIx_read_config_byte(int npci, unchar bus, unchar dev,
+unchar func, unchar offset, unchar *val)
+{
+  *val = 0xff;
+  if (offset & ~0xff) return PCIBIOS_BAD_REGISTER_NUMBER;
+  outl(pciConfigPack(bus,dev,func,offset),BSP_pci_config[npci].pci_config_addr);
+  *val = inb(BSP_pci_config[npci].pci_config_data + (offset&3));
+  return PCIBIOS_SUCCESSFUL;
+}
+
+int PCIx_read_config_word(int npci, unchar bus, unchar dev,
+unchar func, unchar offset, unsigned short *val)
+{
+  *val = 0xffff; 
+  if ((offset&1)|| (offset & ~0xff)) return PCIBIOS_BAD_REGISTER_NUMBER;
+  outl(pciConfigPack(bus,dev,func,offset),BSP_pci_config[npci].pci_config_addr);
+  *val = inw(BSP_pci_config[npci].pci_config_data + (offset&2));
+  return PCIBIOS_SUCCESSFUL;
+}
+
+int PCIx_read_config_dword(int npci, unchar bus, unchar dev,
+unchar func, unchar offset, unsigned int *val) 
+{
+  *val = 0xffffffff; 
+  if ((offset&3)|| (offset & ~0xff)) return PCIBIOS_BAD_REGISTER_NUMBER;
+#if 0
+  printk("addr %x, data %x, pack %x \n", BSP_pci_config[npci].pci_config_addr,
+    BSP_pci_config[npci].pci_config_data,pciConfigPack(bus,dev,func,offset)); 
+#endif
+  outl(pciConfigPack(bus,dev,func,offset),BSP_pci_config[npci].pci_config_addr);
+  *val = inl(BSP_pci_config[npci].pci_config_data);
+  return PCIBIOS_SUCCESSFUL;
+}
+
+int PCIx_write_config_byte(int npci, unchar bus, unchar dev,
+unchar func, unchar offset, unchar val) 
+{
+  if (offset & ~0xff) return PCIBIOS_BAD_REGISTER_NUMBER;
+
+  outl(pciConfigPack(bus,dev,func,offset),BSP_pci_config[npci].pci_config_addr);
+  outb(val, BSP_pci_config[npci].pci_config_data + (offset&3));
+  return PCIBIOS_SUCCESSFUL;
+}
+
+int PCIx_write_config_word(int npci, unchar bus, unchar dev,
+unchar func, unchar offset, unsigned short val) 
+{
+  if ((offset&1)|| (offset & ~0xff)) return PCIBIOS_BAD_REGISTER_NUMBER;
+  outl(pciConfigPack(bus,dev,func,offset),BSP_pci_config[npci].pci_config_addr);
+  outw(val, BSP_pci_config[npci].pci_config_data + (offset&3));
+  return PCIBIOS_SUCCESSFUL;
+}
+
+int PCIx_write_config_dword(int npci,unchar bus,unchar dev,
+unchar func, unchar offset, unsigned int val) 
+{
+  if ((offset&3)|| (offset & ~0xff)) return PCIBIOS_BAD_REGISTER_NUMBER;
+#if 0
+  printk("addr %x, data %x, pack %x \n", BSP_pci_config[npci].pci_config_addr,
+    BSP_pci_config[npci].pci_config_data,pciConfigPack(bus,dev,func,offset));
+#endif
+  outl(pciConfigPack(bus,dev,func,offset),BSP_pci_config[npci].pci_config_addr);
+  outl(val,BSP_pci_config[npci].pci_config_data);
+  return PCIBIOS_SUCCESSFUL;
+}
+
+/* backwards compatible with other PPC board for the vmeUniverse.c */
+int pci_read_config_byte(unchar bus, unchar dev,unchar func,unchar offset,
+unchar *val)
+{
+  return(PCIx_read_config_byte(0, bus, dev, func, offset, val));
+}
+
+int pci_read_config_word(unchar bus, unchar dev,
+unchar func, unchar offset, unsigned short *val)
+{
+  return(PCIx_read_config_word(0, bus, dev, func, offset, val));
+}
+
+int pci_read_config_dword(unchar bus, unchar dev,
+unchar func, unchar offset, unsigned int *val) 
+{
+  return(PCIx_read_config_dword(0, bus, dev, func, offset, val));
+}
+
+int pci_write_config_byte(unchar bus, unchar dev,
+unchar func, unchar offset, unchar val) 
+{
+  return(PCIx_write_config_byte(0, bus, dev, func, offset, val));
+}
+
+int pci_write_config_word(unchar bus, unchar dev,
+unchar func, unchar offset, unsigned short val) 
+{
+  return(PCIx_write_config_word(0, bus, dev, func, offset, val));
+}
+
+int pci_write_config_dword(unchar bus,unchar dev,
+unchar func, unchar offset, unsigned int val) 
+{
+  return(PCIx_write_config_dword(0, bus, dev, func, offset, val));
+}
+
+
+pci_config BSP_pci_config[2] = {
+  {PCI0_CONFIG_ADDR,PCI0_CONFIG_DATA/*,&pci_functions*/},
+       {PCI1_CONFIG_ADDR,PCI1_CONFIG_DATA/*,&pci_functions*/}
+};
+
+/*
+ * This routine determines the maximum bus number in the system
+ */
+void InitializePCI()
+{
+  int PciNumber;
+  unchar ucBusNumber, ucSlotNumber, ucFnNumber, ucNumFuncs;
+  unchar ucMaxSubordinate;
+  unsigned long ulHeader;
+  unsigned int data, datal, datah, pcidata, ulClass, ulDeviceID;
+  unsigned short sdata;
+
+  PCI_interface();
+  
+  /*
+   * Scan PCI0 and PCI1 bus0
+   */
+  for (PciNumber=0; PciNumber < 2; PciNumber++) {
+    pciAccessInit(PciNumber);
+    for (ucBusNumber=0; ucBusNumber< 2; ucBusNumber++) {
+    for (ucSlotNumber=0;ucSlotNumber<PCI_MAX_DEVICES;ucSlotNumber++) {
+      ucFnNumber = 0;
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+				ucSlotNumber,
+				0,
+				PCI0_VENDOR_ID,
+				&ulDeviceID);
+
+      if( ulDeviceID==PCI_INVALID_VENDORDEVICEID) {
+        /* This slot is empty */
+        continue;
+      }
+
+      if (++numPCIDevs > MAX_NUM_PCI_DEVICES) {
+	 BSP_panic("Too many PCI devices found; increase MAX_NUM_PCI_DEVICES in pcicache.c\n");
+      }
+
+      switch(ulDeviceID) { 
+        case (PCI_VENDOR_ID_MARVELL+(PCI_DEVICE_ID_MARVELL_GT6426xAB<<16)):
+#if PCI_PRINT
+	  printk("Marvell GT6426xA/B hostbridge detected at PCI%d bus%d slot%d\n",
+                 PciNumber,ucBusNumber,ucSlotNumber);
+#endif
+          ucMaxPCIBus ++;
+	  break;
+        case (PCI_VENDOR_ID_PLX2+(PCI_DEVICE_ID_PLX2_PCI6154_HB2<<16)):
+#if PCI_PRINT
+          printk("PLX PCI6154 PCI-PCI bridge detected at PCI%d bus%d slot%d\n",
+                 PciNumber,ucBusNumber,ucSlotNumber);
+#endif
+          ucMaxPCIBus ++;
+          break;
+        case PCI_VENDOR_ID_TUNDRA:
+#if PCI_PRINT
+          printk("TUNDRA PCI-VME bridge detected at PCI%d bus%d slot%d\n",
+                 PciNumber,ucBusNumber,ucSlotNumber);
+#endif
+          ucMaxPCIBus ++;
+          break;
+      case (PCI_VENDOR_ID_INTEL+(PCI_DEVICE_INTEL_82544EI_COPPER<<16)):
+#if PCI_PRINT
+          printk("INTEL 82544EI COPPER network controller detected at PCI%d bus%d slot%d\n",
+                 PciNumber,ucBusNumber,ucSlotNumber);
+#endif
+          ucMaxPCIBus ++;
+          break;
+        default : 
+#if PCI_PRINT
+          printk("PCI%d Bus%d Slot%d DeviceID 0x%x \n",
+             PciNumber,ucBusNumber,ucSlotNumber, ulDeviceID);
+#endif
+          break;
+      }
+#if PCI_DEBUG
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+			  ucSlotNumber,
+			  0,
+			  PCI0_BASE_ADDRESS_0,
+                          &data);
+      printk("PCI%d_BASE_ADDRESS_0 0x%x \n",PciNumber, data);  
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+			  ucSlotNumber,
+			  0,
+			  PCI0_BASE_ADDRESS_1,
+                          &data);
+      printk("PCI%d_BASE_ADDRESS_1 0x%x \n",PciNumber, data);
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+ 			  ucSlotNumber,
+			  0,
+			  PCI0_BASE_ADDRESS_2,
+                          &data);
+      printk("PCI%d_BASE_ADDRESS_2 0x%x \n",PciNumber, data);
+
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+ 			  ucSlotNumber,
+			  0,
+			  PCI0_BASE_ADDRESS_3,
+                          &data);
+      printk("PCI%d_BASE_ADDRESS_3 0x%x \n",PciNumber, data);  
+
+     PCIx_read_config_word(PciNumber, ucBusNumber,
+ 			  ucSlotNumber,
+			  0,
+			  PCI0_INTERRUPT_LINE,
+                          &sdata);
+      printk("PCI%d_INTERRUPT_LINE 0x%x \n",PciNumber, sdata);  
+
+      /* We always enable internal memory. */
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+ 			  ucSlotNumber,
+			  0,
+			  PCI0_MEM_BASE_ADDR,
+			  &pcidata);
+      printk("PCI%d_MEM_BASE_ADDR 0x%x \n", PciNumber,pcidata);
+
+      /* We always enable internal IO. */
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+ 			  ucSlotNumber,
+			  0,
+			  PCI0_IO_BASE_ADDR,
+			  &pcidata);
+      printk("PCI%d_IO_BASE_ADDR 0x%x \n", PciNumber,pcidata);
+#endif
+
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+			  ucSlotNumber,
+			  0,
+			  PCI0_CACHE_LINE_SIZE,
+			  &ulHeader);
+      if ((ulHeader>>16)&PCI_MULTI_FUNCTION)
+         ucNumFuncs=PCI_MAX_FUNCTIONS;
+      else
+         ucNumFuncs=1;
+
+#if PCI_DEBUG
+      printk("PCI%d Slot 0x%x HEADER/LAT/CACHE 0x%x \n",
+             PciNumber,ucSlotNumber, ulHeader);    
+
+      for (ucFnNumber=1;ucFnNumber<ucNumFuncs;ucFnNumber++) {
+          PCIx_read_config_dword(PciNumber, ucBusNumber,
+				  ucSlotNumber,
+				  ucFnNumber,
+				  PCI0_VENDOR_ID,
+				  &ulDeviceID);
+          if (ulDeviceID==PCI_INVALID_VENDORDEVICEID) {
+	     /* This slot/function is empty */
+	     continue;
+          }
+          if (++numPCIDevs > MAX_NUM_PCI_DEVICES) {
+	     BSP_panic("Too many PCI devices found; increase MAX_NUM_PCI_DEVICES in pcicache.c\n");
+          }
+
+         /* This slot/function has a device fitted.*/
+         PCIx_read_config_dword(PciNumber, ucBusNumber,
+				  ucSlotNumber,
+				  ucFnNumber,
+				  PCI0_CLASS_REVISION,
+				  &ulClass);     
+         printk("PCI%d Slot 0x%x Func %d classID 0x%x \n",PciNumber,ucSlotNumber,
+             ucFnNumber, ulClass);
+
+         ulClass >>= 16;
+         if (ulClass == PCI_CLASS_GT6426xAB)
+	    printk("GT64260-PCI%d bridge found \n", PciNumber);
+      }
+#endif
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+			       ucSlotNumber,
+			       0,
+			  PCI0_COMMAND,
+                          &pcidata); 
+#if PCI_DEBUG
+      printk("MOTLoad command staus 0x%x, ", pcidata);
+#endif
+      /* Clear the error on the host bridge */
+      if ( (ucBusNumber==0) && (ucSlotNumber==0))
+	pcidata |= PCI_STATUS_CLRERR_MASK;
+      /* Enable bus,I/O and memory master access. */
+      pcidata |= (PCI_COMMAND_MASTER|PCI_COMMAND_IO|PCI_COMMAND_MEMORY);
+      PCIx_write_config_dword(PciNumber, ucBusNumber,
+ 			       ucSlotNumber,
+			       0,
+			  PCI0_COMMAND,
+                          pcidata);
+
+      PCIx_read_config_dword(PciNumber, ucBusNumber,
+			       ucSlotNumber,
+			       0,
+			  PCI0_COMMAND,
+                          &pcidata); 
+#if PCI_DEBUG      
+      printk("Now command/staus 0x%x\n", pcidata);
+#endif
+ 
+    }
+    }
+  } /* PCI number */
+}
+
+/*
+ * Return the number of PCI buses in the system
+ */
+unsigned char BusCountPCI()
+{
+  return(ucMaxPCIBus);
+}
+
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/pci.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/pci.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/pci.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,1200 @@
+/*
+ *
+ *	PCI defines and function prototypes
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997, 1998 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ *
+ *      pci.h,v 1.2 2002/05/14 17:10:16 joel Exp
+ *
+ *      S. Kate Feng : Added vendor/device support for
+ *      Marvell and PLX. 3/5/2004
+ * 
+ */
+
+#ifndef RTEMS_PCI_H
+#define RTEMS_PCI_H
+
+/*
+ * Under PCI0, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI0_VENDOR_ID		0x00	/* 16 bits */
+#define PCI0_DEVICE_ID		0x02	/* 16 bits */
+#define PCI0_COMMAND		0x04	/* 16 bits */
+#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
+#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
+#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */
+#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */
+#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */
+#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
+#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
+#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */
+#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
+#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
+#define  PCI_COMMAND_SB_DIS     0x2000  /* PCI configuration read will stop
+                                         * acting as sync barrier transaction
+                                         */ 
+#define PCI0_STATUS		0x06	/* 16 bits */
+#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
+#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features */
+
+#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
+#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
+#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
+#define  PCI_STATUS_DEVSEL_FAST	0x000	
+#define  PCI_STATUS_DEVSEL_MEDIUM 0x200
+#define  PCI_STATUS_DEVSEL_SLOW 0x400
+#define  PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
+#define  PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
+#define  PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
+#define  PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
+#define  PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+#define  PCI_STATUS_CLRERR_MASK 0xf9000000 /* <SKF> */
+ 
+#define PCI0_CLASS_REVISION	0x08	/* High 24 bits are class, low 8
+					   revision */
+#define PCI0_REVISION_ID        0x08    /* Revision ID */
+#define PCI0_CLASS_PROG         0x09    /* Reg. Level Programming Interface */
+#define PCI0_CLASS_DEVICE       0x0a    /* Device class */
+
+#define PCI0_CACHE_LINE_SIZE	0x0c	/* 8 bits */
+#define PCI0_LATENCY_TIMER	0x0d	/* 8 bits */
+#define PCI0_HEADER_TYPE	0x0e	/* 8 bits */
+#define  PCI_HEADER_TYPE_NORMAL	0
+#define  PCI_HEADER_TYPE_BRIDGE 1
+#define  PCI_HEADER_TYPE_CARDBUS 2
+
+#define PCI0_BIST		0x0f	/* 8 bits */
+#define PCI_BIST_CODE_MASK	0x0f	/* Return result */
+#define PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
+#define PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of 
+ * 0xffffffff to the register, and reading it back.  Only 
+ * 1 bits are decoded.
+ */
+#define PCI0_BASE_ADDRESS_0	0x10	/* 32 bits */
+#define PCI0_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */
+#define PCI0_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */
+#define PCI0_BASE_ADDRESS_3	0x1c	/* 32 bits */
+#define PCI0_MEM_BASE_ADDR	0x20	/* 32 bits */
+#define PCI0_IO_BASE_ADDR	0x24	/* 32 bits */
+#define  PCI_BASE_ADDRESS_SPACE	0x01	/* 0 = memory, 1 = I/O */
+#define  PCI_BASE_ADDRESS_SPACE_IO 0x01
+#define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
+#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
+#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
+#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
+#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
+#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI0_CARDBUS_CIS		0x28
+#define PCI0_SUBSYSTEM_VENDOR_ID	0x2c
+#define PCI0_SUBSYSTEM_ID	        0x2e  
+#define PCI0_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
+#define  PCI_ROM_ADDRESS_ENABLE	0x01
+#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
+
+#define PCI0_CAPABILITY_LIST_POINTER    0x34
+
+/* 0x38-0x3b are reserved */
+#define PCI0_INTERRUPT_LINE	0x3c	/* 8 bits */
+#define PCI0_INTERRUPT_PIN	0x3d	/* 8 bits */
+#define PCI0_MIN_GNT		0x3e	/* 8 bits */
+#define PCI0_MAX_LAT		0x3f	/* 8 bits */
+
+/*
+ * Under PCI1, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */ 
+#define PCI1_VENDOR_ID		0x80	/* 16 bits */
+#define PCI1_DEVICE_ID		0x82	/* 16 bits */
+#define PCI1_COMMAND		0x84	/* 16 bits */
+#define PCI1_STATUS		0x86	/* 16 bits */
+#define PCI1_CLASS_REVISION	0x88	/* High 24 bits are class, low 8
+					   revision */
+#define PCI1_REVISION_ID        0x88    /* Revision ID */
+#define PCI1_CLASS_PROG         0x89    /* Reg. Level Programming Interface */
+#define PCI1_CLASS_DEVICE       0x8a    /* Device class */
+
+#define PCI1_CACHE_LINE_SIZE	0x8c	/* 8 bits */
+#define PCI1_LATENCY_TIMER	0x8d	/* 8 bits */
+#define PCI1_HEADER_TYPE	0x8e	/* 8 bits */
+#define PCI1_BIST		0x8f	/* 8 bits */
+
+#define PCI1_BASE_ADDRESS_0	0x90	/* 32 bits */
+#define PCI1_BASE_ADDRESS_1	0x94	/* 32 bits [htype 0,1 only] */
+#define PCI1_BASE_ADDRESS_2	0x98	/* 32 bits [htype 0 only] */
+#define PCI1_BASE_ADDRESS_3	0x9c	/* 32 bits */
+#define PCI1_MEM_BASE_ADDR	0xa0	/* 32 bits */
+#define PCI1_IO_BASE_ADDR	0xa4	/* 32 bits */
+
+/* Header type 0 (normal devices) */
+#define PCI1_CARDBUS_CIS		0xa8
+#define PCI1_SUBSYSTEM_VENDOR_ID	0xac
+#define PCI1_SUBSYSTEM_ID	        0xae  
+#define PCI1_ROM_ADDRESS		0xb0	/* Bits 31..11 are address, 10..1 reserved */
+#define PCI1_CAPABILITY_LIST_POINTER    0xb4
+
+/* 0xb8-0xbb are reserved */
+#define PCI1_INTERRUPT_LINE	0xbc	/* 8 bits */
+#define PCI1_INTERRUPT_PIN	0xbd	/* 8 bits */
+#define PCI1_MIN_GNT		0xbe	/* 8 bits */
+#define PCI1_MAX_LAT		0xbf	/* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
+#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
+#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
+#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
+#define PCI_IO_LIMIT		0x1d
+#define  PCI_IO_RANGE_TYPE_MASK	0x0f	/* I/O bridging type */
+#define  PCI_IO_RANGE_TYPE_16	0x00
+#define  PCI_IO_RANGE_TYPE_32	0x01
+#define  PCI_IO_RANGE_MASK	~0x0f
+#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
+#define PCI_MEMORY_LIMIT	0x22
+#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0f
+#define  PCI_MEMORY_RANGE_MASK	~0x0f
+#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT	0x26
+#define  PCI_PREF_RANGE_TYPE_MASK 0x0f
+#define  PCI_PREF_RANGE_TYPE_32	0x00
+#define  PCI_PREF_RANGE_TYPE_64	0x01
+#define  PCI_PREF_RANGE_MASK	~0x0f
+#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32	0x2c
+#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16	0x32
+/* 0x34-0x3b is reserved */
+#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL	0x3e
+#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
+#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
+#define  PCI_BRIDGE_CTL_NO_ISA	0x04	/* Disable bridging of ISA ports */
+#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
+#define  PCI_BRIDGE_CTL_MASTER_ABORT 0x20  /* Report master aborts */
+#define  PCI_BRIDGE_CTL_BUS_RESET 0x40	/* Secondary bus reset */
+#define  PCI_BRIDGE_CTL_FAST_BACK 0x80	/* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+/* 0x14-0x15 reserved */
+#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */
+#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */
+#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0	0x1c
+#define PCI_CB_MEMORY_LIMIT_0	0x20
+#define PCI_CB_MEMORY_BASE_1	0x24
+#define PCI_CB_MEMORY_LIMIT_1	0x28
+#define PCI_CB_IO_BASE_0	0x2c
+#define PCI_CB_IO_BASE_0_HI	0x2e
+#define PCI_CB_IO_LIMIT_0	0x30
+#define PCI_CB_IO_LIMIT_0_HI	0x32
+#define PCI_CB_IO_BASE_1	0x34
+#define PCI_CB_IO_BASE_1_HI	0x36
+#define PCI_CB_IO_LIMIT_1	0x38
+#define PCI_CB_IO_LIMIT_1_HI	0x3a
+#define  PCI_CB_IO_RANGE_MASK	~0x03
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL	0x3e
+#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
+#define  PCI_CB_BRIDGE_CTL_SERR		0x02
+#define  PCI_CB_BRIDGE_CTL_ISA		0x04
+#define  PCI_CB_BRIDGE_CTL_VGA		0x08
+#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
+#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
+#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
+#define PCI_CB_SUBSYSTEM_ID	0x42
+#define PCI_CB_LEGACY_MODE_BASE	0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Device classes and subclasses */
+#define PCI_CLASS_GT6426xAB             0x0580    /* <SKF> */
+             
+#define PCI_CLASS_NOT_DEFINED		0x0000
+#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
+
+#define PCI_BASE_CLASS_STORAGE		0x01
+#define PCI_CLASS_STORAGE_SCSI		0x0100
+#define PCI_CLASS_STORAGE_IDE		0x0101
+#define PCI_CLASS_STORAGE_FLOPPY	0x0102
+#define PCI_CLASS_STORAGE_IPI		0x0103
+#define PCI_CLASS_STORAGE_RAID		0x0104
+#define PCI_CLASS_STORAGE_OTHER		0x0180
+
+#define PCI_BASE_CLASS_NETWORK		0x02
+#define PCI_CLASS_NETWORK_ETHERNET	0x0200
+#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
+#define PCI_CLASS_NETWORK_FDDI		0x0202
+#define PCI_CLASS_NETWORK_ATM		0x0203
+#define PCI_CLASS_NETWORK_OTHER		0x0280
+
+#define PCI_BASE_CLASS_DISPLAY		0x03
+#define PCI_CLASS_DISPLAY_VGA		0x0300
+#define PCI_CLASS_DISPLAY_XGA		0x0301
+#define PCI_CLASS_DISPLAY_OTHER		0x0380
+
+#define PCI_BASE_CLASS_MULTIMEDIA	0x04
+#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
+#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
+#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
+
+#define PCI_BASE_CLASS_MEMORY		0x05
+#define  PCI_CLASS_MEMORY_RAM		0x0500
+#define  PCI_CLASS_MEMORY_FLASH		0x0501
+#define  PCI_CLASS_MEMORY_OTHER		0x0580
+
+#define PCI_BASE_CLASS_BRIDGE		0x06
+#define  PCI_CLASS_BRIDGE_HOST		0x0600
+#define  PCI_CLASS_BRIDGE_ISA		0x0601
+#define  PCI_CLASS_BRIDGE_EISA		0x0602
+#define  PCI_CLASS_BRIDGE_MC		0x0603
+#define  PCI_CLASS_BRIDGE_PCI		0x0604
+#define  PCI_CLASS_BRIDGE_PCMCIA	0x0605
+#define  PCI_CLASS_BRIDGE_NUBUS		0x0606
+#define  PCI_CLASS_BRIDGE_CARDBUS	0x0607
+#define  PCI_CLASS_BRIDGE_OTHER		0x0680
+
+#define PCI_BASE_CLASS_COMMUNICATION	0x07
+#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
+#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
+
+#define PCI_BASE_CLASS_SYSTEM		0x08
+#define PCI_CLASS_SYSTEM_PIC		0x0800
+#define PCI_CLASS_SYSTEM_DMA		0x0801
+#define PCI_CLASS_SYSTEM_TIMER		0x0802
+#define PCI_CLASS_SYSTEM_RTC		0x0803
+#define PCI_CLASS_SYSTEM_OTHER		0x0880
+
+#define PCI_BASE_CLASS_INPUT		0x09
+#define PCI_CLASS_INPUT_KEYBOARD	0x0900
+#define PCI_CLASS_INPUT_PEN		0x0901
+#define PCI_CLASS_INPUT_MOUSE		0x0902
+#define PCI_CLASS_INPUT_OTHER		0x0980
+
+#define PCI_BASE_CLASS_DOCKING		0x0a
+#define PCI_CLASS_DOCKING_GENERIC	0x0a00
+#define PCI_CLASS_DOCKING_OTHER		0x0a01
+
+#define PCI_BASE_CLASS_PROCESSOR	0x0b
+#define PCI_CLASS_PROCESSOR_386		0x0b00
+#define PCI_CLASS_PROCESSOR_486		0x0b01
+#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
+#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
+#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
+#define PCI_CLASS_PROCESSOR_CO		0x0b40
+
+#define PCI_BASE_CLASS_SERIAL		0x0c
+#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
+#define PCI_CLASS_SERIAL_ACCESS		0x0c01
+#define PCI_CLASS_SERIAL_SSA		0x0c02
+#define PCI_CLASS_SERIAL_USB		0x0c03
+#define PCI_CLASS_SERIAL_FIBER		0x0c04
+
+#define PCI_CLASS_OTHERS		0xff
+
+/*
+ * Vendor and card ID's: sort these numerically according to vendor
+ * (and according to card ID within vendor). Send all updates to
+ * <linux-pcisupport@cck.uni-kl.de>.
+ */
+#define PCI_VENDOR_ID_MARVELL           0x11ab   /* <SKF> */
+#define PCI_DEVICE_ID_MARVELL_GT6426xAB 0x6430   /* <SKF> */
+
+/* Note : The PLX Technology Inc. had the old VENDOR_ID.
+ * See PCI_VENDOR_ID_PLX,  PCI_VENDOR_ID_PLX_9050, ..etc.
+ */
+#define PCI_VENDOR_ID_PLX2              0x3388   /* <SKF> */
+#define PCI_DEVICE_ID_PLX2_PCI6154_HB2  0x26     /* <SKF> */
+
+#define PCI_VENDOR_ID_COMPAQ		0x0e11
+#define PCI_DEVICE_ID_COMPAQ_1280	0x3033
+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX	0x4000
+#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
+#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
+#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
+#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
+#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
+#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
+
+#define PCI_VENDOR_ID_NCR		0x1000
+#define PCI_DEVICE_ID_NCR_53C810	0x0001
+#define PCI_DEVICE_ID_NCR_53C820	0x0002
+#define PCI_DEVICE_ID_NCR_53C825	0x0003
+#define PCI_DEVICE_ID_NCR_53C815	0x0004
+#define PCI_DEVICE_ID_NCR_53C860	0x0006
+#define PCI_DEVICE_ID_NCR_53C896	0x000b
+#define PCI_DEVICE_ID_NCR_53C895	0x000c
+#define PCI_DEVICE_ID_NCR_53C885	0x000d
+#define PCI_DEVICE_ID_NCR_53C875	0x000f
+#define PCI_DEVICE_ID_NCR_53C875J	0x008f
+
+#define PCI_VENDOR_ID_ATI		0x1002
+#define PCI_DEVICE_ID_ATI_68800		0x4158
+#define PCI_DEVICE_ID_ATI_215CT222	0x4354
+#define PCI_DEVICE_ID_ATI_210888CX	0x4358
+#define PCI_DEVICE_ID_ATI_215GB		0x4742
+#define PCI_DEVICE_ID_ATI_215GD		0x4744
+#define PCI_DEVICE_ID_ATI_215GI		0x4749
+#define PCI_DEVICE_ID_ATI_215GP		0x4750
+#define PCI_DEVICE_ID_ATI_215GQ		0x4751
+#define PCI_DEVICE_ID_ATI_215GT		0x4754
+#define PCI_DEVICE_ID_ATI_215GTB	0x4755
+#define PCI_DEVICE_ID_ATI_210888GX	0x4758
+#define PCI_DEVICE_ID_ATI_215LG		0x4c47
+#define PCI_DEVICE_ID_ATI_264LT		0x4c54
+#define PCI_DEVICE_ID_ATI_264VT		0x5654
+
+#define PCI_VENDOR_ID_VLSI		0x1004
+#define PCI_DEVICE_ID_VLSI_82C592	0x0005
+#define PCI_DEVICE_ID_VLSI_82C593	0x0006
+#define PCI_DEVICE_ID_VLSI_82C594	0x0007
+#define PCI_DEVICE_ID_VLSI_82C597	0x0009
+#define PCI_DEVICE_ID_VLSI_82C541	0x000c
+#define PCI_DEVICE_ID_VLSI_82C543	0x000d
+#define PCI_DEVICE_ID_VLSI_82C532	0x0101
+#define PCI_DEVICE_ID_VLSI_82C534	0x0102
+#define PCI_DEVICE_ID_VLSI_82C535	0x0104
+#define PCI_DEVICE_ID_VLSI_82C147	0x0105
+#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
+
+#define PCI_VENDOR_ID_ADL		0x1005
+#define PCI_DEVICE_ID_ADL_2301		0x2301
+
+#define PCI_VENDOR_ID_NS		0x100b
+#define PCI_DEVICE_ID_NS_87415		0x0002
+#define PCI_DEVICE_ID_NS_87410		0xd001
+
+#define PCI_VENDOR_ID_TSENG		0x100c
+#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
+#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
+#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
+#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
+#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
+
+#define PCI_VENDOR_ID_WEITEK		0x100e
+#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
+#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
+
+#define PCI_VENDOR_ID_DEC		0x1011
+#define PCI_DEVICE_ID_DEC_BRD		0x0001
+#define PCI_DEVICE_ID_DEC_TULIP		0x0002
+#define PCI_DEVICE_ID_DEC_TGA		0x0004
+#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
+#define PCI_DEVICE_ID_DEC_TGA2		0x000D
+#define PCI_DEVICE_ID_DEC_FDDI		0x000F
+#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
+#define PCI_DEVICE_ID_DEC_21142		0x0019
+#define PCI_DEVICE_ID_DEC_21052		0x0021
+#define PCI_DEVICE_ID_DEC_21150		0x0022
+#define PCI_DEVICE_ID_DEC_21152		0x0024
+
+#define PCI_VENDOR_ID_CIRRUS		0x1013
+#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
+#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
+#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
+#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
+#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
+#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
+#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
+#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
+#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
+#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
+#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
+#define PCI_DEVICE_ID_CIRRUS_7542	0x1200
+#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
+#define PCI_DEVICE_ID_CIRRUS_7541	0x1204
+
+#define PCI_VENDOR_ID_IBM		0x1014
+#define PCI_DEVICE_ID_IBM_FIRE_CORAL	0x000a
+#define PCI_DEVICE_ID_IBM_TR		0x0018
+#define PCI_DEVICE_ID_IBM_82G2675	0x001d
+#define PCI_DEVICE_ID_IBM_MCA		0x0020
+#define PCI_DEVICE_ID_IBM_82351		0x0022
+#define PCI_DEVICE_ID_IBM_SERVERAID	0x002e
+#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
+#define PCI_DEVICE_ID_IBM_MPIC		0x0046
+#define PCI_DEVICE_ID_IBM_3780IDSP	0x007d
+#define PCI_DEVICE_ID_IBM_MPIC_2	0xffff
+
+#define PCI_VENDOR_ID_WD		0x101c
+#define PCI_DEVICE_ID_WD_7197		0x3296
+
+#define PCI_VENDOR_ID_AMD		0x1022
+#define PCI_DEVICE_ID_AMD_LANCE		0x2000
+#define PCI_DEVICE_ID_AMD_SCSI		0x2020
+
+#define PCI_VENDOR_ID_TRIDENT		0x1023
+#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
+#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
+#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
+#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
+#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
+
+#define PCI_VENDOR_ID_AI		0x1025
+#define PCI_DEVICE_ID_AI_M1435		0x1435
+
+#define PCI_VENDOR_ID_MATROX		0x102B
+#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
+#define PCI_DEVICE_ID_MATROX_MIL	0x0519
+#define PCI_DEVICE_ID_MATROX_MYS	0x051A
+#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
+#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
+
+#define PCI_VENDOR_ID_CT		0x102c
+#define PCI_DEVICE_ID_CT_65545		0x00d8
+#define PCI_DEVICE_ID_CT_65548		0x00dc
+#define PCI_DEVICE_ID_CT_65550		0x00e0
+#define PCI_DEVICE_ID_CT_65554		0x00e4
+#define PCI_DEVICE_ID_CT_65555		0x00e5
+
+#define PCI_VENDOR_ID_MIRO		0x1031
+#define PCI_DEVICE_ID_MIRO_36050	0x5601
+
+#define PCI_VENDOR_ID_NEC		0x1033
+#define PCI_DEVICE_ID_NEC_PCX2		0x0046
+
+#define PCI_VENDOR_ID_FD		0x1036
+#define PCI_DEVICE_ID_FD_36C70		0x0000
+
+#define PCI_VENDOR_ID_SI		0x1039
+#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
+#define PCI_DEVICE_ID_SI_6202		0x0002
+#define PCI_DEVICE_ID_SI_503		0x0008
+#define PCI_DEVICE_ID_SI_ACPI		0x0009
+#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
+#define PCI_DEVICE_ID_SI_6205		0x0205
+#define PCI_DEVICE_ID_SI_501		0x0406
+#define PCI_DEVICE_ID_SI_496		0x0496
+#define PCI_DEVICE_ID_SI_601		0x0601
+#define PCI_DEVICE_ID_SI_5107		0x5107
+#define PCI_DEVICE_ID_SI_5511		0x5511
+#define PCI_DEVICE_ID_SI_5513		0x5513
+#define PCI_DEVICE_ID_SI_5571		0x5571
+#define PCI_DEVICE_ID_SI_5591		0x5591
+#define PCI_DEVICE_ID_SI_5597		0x5597
+#define PCI_DEVICE_ID_SI_7001		0x7001
+
+#define PCI_VENDOR_ID_HP		0x103c
+#define PCI_DEVICE_ID_HP_J2585A		0x1030
+#define PCI_DEVICE_ID_HP_J2585B		0x1031
+
+#define PCI_VENDOR_ID_PCTECH		0x1042
+#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
+#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_0	0x3000
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_1	0x3010
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
+
+#define PCI_VENDOR_ID_DPT               0x1044   
+#define PCI_DEVICE_ID_DPT               0xa400  
+
+#define PCI_VENDOR_ID_OPTI		0x1045
+#define PCI_DEVICE_ID_OPTI_92C178	0xc178
+#define PCI_DEVICE_ID_OPTI_82C557	0xc557
+#define PCI_DEVICE_ID_OPTI_82C558	0xc558
+#define PCI_DEVICE_ID_OPTI_82C621	0xc621
+#define PCI_DEVICE_ID_OPTI_82C700	0xc700
+#define PCI_DEVICE_ID_OPTI_82C701	0xc701
+#define PCI_DEVICE_ID_OPTI_82C814	0xc814
+#define PCI_DEVICE_ID_OPTI_82C822	0xc822
+#define PCI_DEVICE_ID_OPTI_82C825	0xd568
+
+#define PCI_VENDOR_ID_SGS		0x104a
+#define PCI_DEVICE_ID_SGS_2000		0x0008
+#define PCI_DEVICE_ID_SGS_1764		0x0009
+
+#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
+
+#define PCI_VENDOR_ID_TI		0x104c
+#define PCI_DEVICE_ID_TI_TVP4010	0x3d04
+#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
+#define PCI_DEVICE_ID_TI_PCI1130	0xac12
+#define PCI_DEVICE_ID_TI_PCI1031	0xac13
+#define PCI_DEVICE_ID_TI_PCI1131	0xac15
+#define PCI_DEVICE_ID_TI_PCI1250	0xac16
+#define PCI_DEVICE_ID_TI_PCI1220	0xac17
+
+#define PCI_VENDOR_ID_OAK		0x104e
+#define PCI_DEVICE_ID_OAK_OTI107	0x0107
+
+/* Winbond have two vendor IDs! See 0x10ad as well */
+#define PCI_VENDOR_ID_WINBOND2		0x1050
+#define PCI_DEVICE_ID_WINBOND2_89C940	0x0940
+
+#define PCI_VENDOR_ID_MOTOROLA		0x1057
+#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
+#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
+#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
+
+#define PCI_VENDOR_ID_PROMISE		0x105a
+#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
+#define PCI_DEVICE_ID_PROMISE_5300	0x5300
+
+#define PCI_VENDOR_ID_N9		0x105d
+#define PCI_DEVICE_ID_N9_I128		0x2309
+#define PCI_DEVICE_ID_N9_I128_2		0x2339
+#define PCI_DEVICE_ID_N9_I128_T2R	0x493d
+
+#define PCI_VENDOR_ID_UMC		0x1060
+#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
+#define PCI_DEVICE_ID_UMC_UM8891A	0x0891
+#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
+#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
+#define PCI_DEVICE_ID_UMC_UM8881F	0x8881
+#define PCI_DEVICE_ID_UMC_UM8886F	0x8886
+#define PCI_DEVICE_ID_UMC_UM9017F	0x9017
+#define PCI_DEVICE_ID_UMC_UM8886N	0xe886
+#define PCI_DEVICE_ID_UMC_UM8891N	0xe891
+
+#define PCI_VENDOR_ID_X			0x1061
+#define PCI_DEVICE_ID_X_AGX016		0x0001
+
+#define PCI_VENDOR_ID_PICOP		0x1066
+#define PCI_DEVICE_ID_PICOP_PT86C52X	0x0001
+#define PCI_DEVICE_ID_PICOP_PT80C524	0x8002
+
+#define PCI_VENDOR_ID_APPLE		0x106b
+#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
+#define PCI_DEVICE_ID_APPLE_GC		0x0002
+#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
+
+#define PCI_VENDOR_ID_NEXGEN		0x1074
+#define PCI_DEVICE_ID_NEXGEN_82C501	0x4e78
+
+#define PCI_VENDOR_ID_QLOGIC		0x1077
+#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
+#define PCI_DEVICE_ID_QLOGIC_ISP1022	0x1022
+
+#define PCI_VENDOR_ID_CYRIX		0x1078
+#define PCI_DEVICE_ID_CYRIX_5510	0x0000
+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
+#define PCI_DEVICE_ID_CYRIX_5520	0x0002
+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
+#define PCI_DEVICE_ID_CYRIX_5530_SMI	0x0101
+#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
+
+#define PCI_VENDOR_ID_LEADTEK		0x107d
+#define PCI_DEVICE_ID_LEADTEK_805	0x0000
+
+#define PCI_VENDOR_ID_CONTAQ		0x1080
+#define PCI_DEVICE_ID_CONTAQ_82C599	0x0600
+#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
+
+#define PCI_VENDOR_ID_FOREX		0x1083
+
+#define PCI_VENDOR_ID_OLICOM		0x108d
+#define PCI_DEVICE_ID_OLICOM_OC3136	0x0001
+#define PCI_DEVICE_ID_OLICOM_OC2315	0x0011
+#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
+#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
+#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
+#define PCI_DEVICE_ID_OLICOM_OC6151	0x0021
+
+#define PCI_VENDOR_ID_SUN		0x108e
+#define PCI_DEVICE_ID_SUN_EBUS		0x1000
+#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
+#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
+#define PCI_DEVICE_ID_SUN_PBM		0x8000
+#define PCI_DEVICE_ID_SUN_SABRE		0xa000
+
+#define PCI_VENDOR_ID_CMD		0x1095
+#define PCI_DEVICE_ID_CMD_640		0x0640
+#define PCI_DEVICE_ID_CMD_643		0x0643
+#define PCI_DEVICE_ID_CMD_646		0x0646
+#define PCI_DEVICE_ID_CMD_647		0x0647
+#define PCI_DEVICE_ID_CMD_670		0x0670
+
+#define PCI_VENDOR_ID_VISION		0x1098
+#define PCI_DEVICE_ID_VISION_QD8500	0x0001
+#define PCI_DEVICE_ID_VISION_QD8580	0x0002
+
+#define PCI_VENDOR_ID_BROOKTREE		0x109e
+#define PCI_DEVICE_ID_BROOKTREE_848	0x0350
+#define PCI_DEVICE_ID_BROOKTREE_849A	0x0351
+#define PCI_DEVICE_ID_BROOKTREE_8474	0x8474
+
+#define PCI_VENDOR_ID_SIERRA		0x10a8
+#define PCI_DEVICE_ID_SIERRA_STB	0x0000
+
+#define PCI_VENDOR_ID_ACC		0x10aa
+#define PCI_DEVICE_ID_ACC_2056		0x0000
+
+#define PCI_VENDOR_ID_WINBOND		0x10ad
+#define PCI_DEVICE_ID_WINBOND_83769	0x0001
+#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
+#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
+
+#define PCI_VENDOR_ID_DATABOOK		0x10b3
+#define PCI_DEVICE_ID_DATABOOK_87144	0xb106
+
+#define PCI_VENDOR_ID_PLX		0x10b5
+#define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9060		0x9060
+#define PCI_DEVICE_ID_PLX_9060ES	0x906E
+#define PCI_DEVICE_ID_PLX_9060SD	0x906D
+#define PCI_DEVICE_ID_PLX_9080		0x9080
+
+#define PCI_VENDOR_ID_MADGE		0x10b6
+#define PCI_DEVICE_ID_MADGE_MK2		0x0002
+#define PCI_DEVICE_ID_MADGE_C155S	0x1001
+
+#define PCI_VENDOR_ID_3COM		0x10b7
+#define PCI_DEVICE_ID_3COM_3C339	0x3390
+#define PCI_DEVICE_ID_3COM_3C590	0x5900
+#define PCI_DEVICE_ID_3COM_3C595TX	0x5950
+#define PCI_DEVICE_ID_3COM_3C595T4	0x5951
+#define PCI_DEVICE_ID_3COM_3C595MII	0x5952
+#define PCI_DEVICE_ID_3COM_3C900TPO	0x9000
+#define PCI_DEVICE_ID_3COM_3C900COMBO	0x9001
+#define PCI_DEVICE_ID_3COM_3C905TX	0x9050
+#define PCI_DEVICE_ID_3COM_3C905T4	0x9051
+#define PCI_DEVICE_ID_3COM_3C905B_TX	0x9055
+
+#define PCI_VENDOR_ID_SMC		0x10b8
+#define PCI_DEVICE_ID_SMC_EPIC100	0x0005
+
+#define PCI_VENDOR_ID_AL		0x10b9
+#define PCI_DEVICE_ID_AL_M1445		0x1445
+#define PCI_DEVICE_ID_AL_M1449		0x1449
+#define PCI_DEVICE_ID_AL_M1451		0x1451
+#define PCI_DEVICE_ID_AL_M1461		0x1461
+#define PCI_DEVICE_ID_AL_M1489		0x1489
+#define PCI_DEVICE_ID_AL_M1511		0x1511
+#define PCI_DEVICE_ID_AL_M1513		0x1513
+#define PCI_DEVICE_ID_AL_M1521		0x1521
+#define PCI_DEVICE_ID_AL_M1523		0x1523
+#define PCI_DEVICE_ID_AL_M1531		0x1531
+#define PCI_DEVICE_ID_AL_M1533		0x1533
+#define PCI_DEVICE_ID_AL_M3307		0x3307
+#define PCI_DEVICE_ID_AL_M4803		0x5215
+#define PCI_DEVICE_ID_AL_M5219		0x5219
+#define PCI_DEVICE_ID_AL_M5229		0x5229
+#define PCI_DEVICE_ID_AL_M5237		0x5237
+#define PCI_DEVICE_ID_AL_M7101		0x7101
+
+#define PCI_VENDOR_ID_MITSUBISHI	0x10ba
+
+#define PCI_VENDOR_ID_SURECOM		0x10bd
+#define PCI_DEVICE_ID_SURECOM_NE34	0x0e34
+
+#define PCI_VENDOR_ID_NEOMAGIC          0x10c8
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
+
+#define PCI_VENDOR_ID_ASP		0x10cd
+#define PCI_DEVICE_ID_ASP_ABP940	0x1200
+#define PCI_DEVICE_ID_ASP_ABP940U	0x1300
+#define PCI_DEVICE_ID_ASP_ABP940UW	0x2300
+
+#define PCI_VENDOR_ID_MACRONIX		0x10d9
+#define PCI_DEVICE_ID_MACRONIX_MX98713	0x0512
+#define PCI_DEVICE_ID_MACRONIX_MX987x5	0x0531
+
+#define PCI_VENDOR_ID_CERN		0x10dc
+#define PCI_DEVICE_ID_CERN_SPSB_PMC	0x0001
+#define PCI_DEVICE_ID_CERN_SPSB_PCI	0x0002
+#define PCI_DEVICE_ID_CERN_HIPPI_DST	0x0021
+#define PCI_DEVICE_ID_CERN_HIPPI_SRC	0x0022
+
+#define PCI_VENDOR_ID_NVIDIA		0x10de
+
+#define PCI_VENDOR_ID_IMS		0x10e0
+#define PCI_DEVICE_ID_IMS_8849		0x8849
+
+#define PCI_VENDOR_ID_TEKRAM2		0x10e1
+#define PCI_DEVICE_ID_TEKRAM2_690c	0x690c
+
+#define PCI_VENDOR_ID_TUNDRA		0x10e3
+#define PCI_DEVICE_ID_TUNDRA_CA91C042	0x0000
+
+#define PCI_VENDOR_ID_AMCC		0x10e8
+#define PCI_DEVICE_ID_AMCC_MYRINET	0x8043
+#define PCI_DEVICE_ID_AMCC_PARASTATION	0x8062
+#define PCI_DEVICE_ID_AMCC_S5933	0x807d
+#define PCI_DEVICE_ID_AMCC_S5933_HEPC3	0x809c
+
+#define PCI_VENDOR_ID_INTERG		0x10ea
+#define PCI_DEVICE_ID_INTERG_1680	0x1680
+#define PCI_DEVICE_ID_INTERG_1682	0x1682
+
+#define PCI_VENDOR_ID_REALTEK		0x10ec
+#define PCI_DEVICE_ID_REALTEK_8029	0x8029
+#define PCI_DEVICE_ID_REALTEK_8129	0x8129
+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
+
+#define PCI_VENDOR_ID_TRUEVISION	0x10fa
+#define PCI_DEVICE_ID_TRUEVISION_T1000	0x000c
+
+#define PCI_VENDOR_ID_INIT		0x1101
+#define PCI_DEVICE_ID_INIT_320P		0x9100
+#define PCI_DEVICE_ID_INIT_360P		0x9500
+
+#define PCI_VENDOR_ID_TTI		0x1103
+#define PCI_DEVICE_ID_TTI_HPT343	0x0003
+
+#define PCI_VENDOR_ID_VIA		0x1106
+#define PCI_DEVICE_ID_VIA_82C505	0x0505
+#define PCI_DEVICE_ID_VIA_82C561	0x0561
+#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
+#define PCI_DEVICE_ID_VIA_82C576	0x0576
+#define PCI_DEVICE_ID_VIA_82C585	0x0585
+#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
+#define PCI_DEVICE_ID_VIA_82C595	0x0595
+#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
+#define PCI_DEVICE_ID_VIA_82C926	0x0926
+#define PCI_DEVICE_ID_VIA_82C416	0x1571
+#define PCI_DEVICE_ID_VIA_82C595_97	0x1595
+#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
+#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
+#define PCI_DEVICE_ID_VIA_86C100A	0x6100
+#define PCI_DEVICE_ID_VIA_82C597_1	0x8597
+
+#define PCI_VENDOR_ID_VORTEX		0x1119
+#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
+#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
+#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
+#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
+#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
+#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
+#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
+#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
+#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
+#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
+#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
+#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
+#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
+#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1	0x0110
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1	0x0111
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP1	0x0112
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP1	0x0113
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1	0x0114
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1	0x0115
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2	0x0120
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2	0x0121
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP2	0x0122
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP2	0x0123
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2	0x0124
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2	0x0125
+
+#define PCI_VENDOR_ID_EF		0x111a
+#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
+#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
+
+#define PCI_VENDOR_ID_FORE		0x1127
+#define PCI_DEVICE_ID_FORE_PCA200PC	0x0210
+#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
+
+#define PCI_VENDOR_ID_IMAGINGTECH	0x112f
+#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI	0x0000
+
+#define PCI_VENDOR_ID_PHILIPS		0x1131
+#define PCI_DEVICE_ID_PHILIPS_SAA7145	0x7145
+#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
+
+#define PCI_VENDOR_ID_CYCLONE		0x113c
+#define PCI_DEVICE_ID_CYCLONE_SDK	0x0001
+
+#define PCI_VENDOR_ID_ALLIANCE		0x1142
+#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO	0x3210
+#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO	0x6422
+#define PCI_DEVICE_ID_ALLIANCE_AT24	0x6424
+#define PCI_DEVICE_ID_ALLIANCE_AT3D	0x643d
+
+#define PCI_VENDOR_ID_SK		0x1148
+#define PCI_DEVICE_ID_SK_FP		0x4000
+#define PCI_DEVICE_ID_SK_TR		0x4200
+#define PCI_DEVICE_ID_SK_GE		0x4300
+
+#define PCI_VENDOR_ID_VMIC		0x114a
+#define PCI_DEVICE_ID_VMIC_VME		0x7587
+
+#define PCI_VENDOR_ID_DIGI		0x114f
+#define PCI_DEVICE_ID_DIGI_EPC		0x0002
+#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH	0x0003
+#define PCI_DEVICE_ID_DIGI_XEM		0x0004
+#define PCI_DEVICE_ID_DIGI_XR		0x0005
+#define PCI_DEVICE_ID_DIGI_CX		0x0006
+#define PCI_DEVICE_ID_DIGI_XRJ		0x0009
+#define PCI_DEVICE_ID_DIGI_EPCJ		0x000a
+#define PCI_DEVICE_ID_DIGI_XR_920	0x0027
+
+#define PCI_VENDOR_ID_MUTECH		0x1159
+#define PCI_DEVICE_ID_MUTECH_MV1000	0x0001
+
+#define PCI_VENDOR_ID_RENDITION		0x1163
+#define PCI_DEVICE_ID_RENDITION_VERITE	0x0001
+#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
+
+#define PCI_VENDOR_ID_TOSHIBA		0x1179
+#define PCI_DEVICE_ID_TOSHIBA_601	0x0601
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
+
+#define PCI_VENDOR_ID_RICOH		0x1180
+#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
+#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
+#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
+#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
+
+#define PCI_VENDOR_ID_ARTOP		0x1191
+#define PCI_DEVICE_ID_ARTOP_ATP8400	0x0004
+#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
+
+#define PCI_VENDOR_ID_ZEITNET		0x1193
+#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
+#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
+
+#define PCI_VENDOR_ID_OMEGA		0x119b
+#define PCI_DEVICE_ID_OMEGA_82C092G	0x1221
+
+#define PCI_VENDOR_ID_LITEON		0x11ad
+#define PCI_DEVICE_ID_LITEON_LNE100TX	0x0002
+
+#define PCI_VENDOR_ID_NP		0x11bc
+#define PCI_DEVICE_ID_NP_PCI_FDDI	0x0001
+
+#define PCI_VENDOR_ID_ATT		0x11c1
+#define PCI_DEVICE_ID_ATT_L56XMF	0x0440
+
+#define PCI_VENDOR_ID_SPECIALIX		0x11cb
+#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
+#define PCI_DEVICE_ID_SPECIALIX_XIO	0x4000
+#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
+
+#define PCI_VENDOR_ID_AURAVISION	0x11d1
+#define PCI_DEVICE_ID_AURAVISION_VXP524	0x01f7
+
+#define PCI_VENDOR_ID_IKON		0x11d5
+#define PCI_DEVICE_ID_IKON_10115	0x0115
+#define PCI_DEVICE_ID_IKON_10117	0x0117
+
+#define PCI_VENDOR_ID_ZORAN		0x11de
+#define PCI_DEVICE_ID_ZORAN_36057	0x6057
+#define PCI_DEVICE_ID_ZORAN_36120	0x6120
+
+#define PCI_VENDOR_ID_KINETIC		0x11f4
+#define PCI_DEVICE_ID_KINETIC_2915	0x2915
+
+#define PCI_VENDOR_ID_COMPEX		0x11f6
+#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
+#define PCI_DEVICE_ID_COMPEX_RL2000	0x1401
+
+#define PCI_VENDOR_ID_RP               0x11fe
+#define PCI_DEVICE_ID_RP32INTF         0x0001
+#define PCI_DEVICE_ID_RP8INTF          0x0002
+#define PCI_DEVICE_ID_RP16INTF         0x0003
+#define PCI_DEVICE_ID_RP4QUAD	       0x0004
+#define PCI_DEVICE_ID_RP8OCTA          0x0005
+#define PCI_DEVICE_ID_RP8J	       0x0006
+#define PCI_DEVICE_ID_RPP4	       0x000A
+#define PCI_DEVICE_ID_RPP8	       0x000B
+#define PCI_DEVICE_ID_RP8M	       0x000C
+
+#define PCI_VENDOR_ID_CYCLADES		0x120e
+#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
+#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
+#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
+#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
+
+#define PCI_VENDOR_ID_ESSENTIAL		0x120f
+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
+
+#define PCI_VENDOR_ID_O2		0x1217
+#define PCI_DEVICE_ID_O2_6729		0x6729
+#define PCI_DEVICE_ID_O2_6730		0x673a
+#define PCI_DEVICE_ID_O2_6832		0x6832
+#define PCI_DEVICE_ID_O2_6836		0x6836
+
+#define PCI_VENDOR_ID_3DFX		0x121a
+#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
+#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
+
+#define PCI_VENDOR_ID_SIGMADES		0x1236
+#define PCI_DEVICE_ID_SIGMADES_6425	0x6401
+
+#define PCI_VENDOR_ID_CCUBE		0x123f
+
+#define PCI_VENDOR_ID_DIPIX		0x1246
+
+#define PCI_VENDOR_ID_STALLION		0x124d
+#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
+#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
+#define PCI_DEVICE_ID_STALLION_EIOPCI	0x0003
+
+#define PCI_VENDOR_ID_OPTIBASE		0x1255
+#define PCI_DEVICE_ID_OPTIBASE_FORGE	0x1110
+#define PCI_DEVICE_ID_OPTIBASE_FUSION	0x1210
+#define PCI_DEVICE_ID_OPTIBASE_VPLEX	0x2110
+#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC	0x2120
+#define PCI_DEVICE_ID_OPTIBASE_VQUEST	0x2130
+
+#define PCI_VENDOR_ID_SATSAGEM		0x1267
+#define PCI_DEVICE_ID_SATSAGEM_PCR2101	0x5352
+#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
+
+#define PCI_VENDOR_ID_HUGHES		0x1273
+#define PCI_DEVICE_ID_HUGHES_DIRECPC	0x0002
+
+#define PCI_VENDOR_ID_ENSONIQ		0x1274
+#define PCI_DEVICE_ID_ENSONIQ_AUDIOPCI	0x5000
+
+#define PCI_VENDOR_ID_ALTEON		0x12ae
+#define PCI_DEVICE_ID_ALTEON_ACENIC	0x0001
+
+#define PCI_VENDOR_ID_PICTUREL		0x12c5
+#define PCI_DEVICE_ID_PICTUREL_PCIVST	0x0081
+
+#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
+
+#define PCI_VENDOR_ID_CBOARDS		0x1307
+#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
+
+#define PCI_VENDOR_ID_SYMPHONY		0x1c1c
+#define PCI_DEVICE_ID_SYMPHONY_101	0x0001
+
+#define PCI_VENDOR_ID_TEKRAM		0x1de1
+#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
+
+#define PCI_VENDOR_ID_3DLABS		0x3d3d
+#define PCI_DEVICE_ID_3DLABS_300SX	0x0001
+#define PCI_DEVICE_ID_3DLABS_500TX	0x0002
+#define PCI_DEVICE_ID_3DLABS_DELTA	0x0003
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA	0x0004
+#define PCI_DEVICE_ID_3DLABS_MX		0x0006
+
+#define PCI_VENDOR_ID_AVANCE		0x4005
+#define PCI_DEVICE_ID_AVANCE_ALG2064	0x2064
+#define PCI_DEVICE_ID_AVANCE_2302	0x2302
+
+#define PCI_VENDOR_ID_NETVIN		0x4a14
+#define PCI_DEVICE_ID_NETVIN_NV5000SC	0x5000
+
+#define PCI_VENDOR_ID_S3		0x5333
+#define PCI_DEVICE_ID_S3_PLATO_PXS	0x0551
+#define PCI_DEVICE_ID_S3_ViRGE		0x5631
+#define PCI_DEVICE_ID_S3_TRIO		0x8811
+#define PCI_DEVICE_ID_S3_AURORA64VP	0x8812
+#define PCI_DEVICE_ID_S3_TRIO64UVP	0x8814
+#define PCI_DEVICE_ID_S3_ViRGE_VX	0x883d
+#define PCI_DEVICE_ID_S3_868		0x8880
+#define PCI_DEVICE_ID_S3_928		0x88b0
+#define PCI_DEVICE_ID_S3_864_1		0x88c0
+#define PCI_DEVICE_ID_S3_864_2		0x88c1
+#define PCI_DEVICE_ID_S3_964_1		0x88d0
+#define PCI_DEVICE_ID_S3_964_2		0x88d1
+#define PCI_DEVICE_ID_S3_968		0x88f0
+#define PCI_DEVICE_ID_S3_TRIO64V2	0x8901
+#define PCI_DEVICE_ID_S3_PLATO_PXG	0x8902
+#define PCI_DEVICE_ID_S3_ViRGE_DXGX	0x8a01
+#define PCI_DEVICE_ID_S3_ViRGE_GX2	0x8a10
+#define PCI_DEVICE_ID_S3_ViRGE_MX	0x8c01
+#define PCI_DEVICE_ID_S3_ViRGE_MXP	0x8c02
+#define PCI_DEVICE_ID_S3_ViRGE_MXPMV	0x8c03
+#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
+
+#define PCI_VENDOR_ID_INTEL		0x8086
+#define PCI_DEVICE_INTEL_82544EI_COPPER	0x1008	/* <SKF> */
+#define PCI_DEVICE_ID_INTEL_82375	0x0482
+#define PCI_DEVICE_ID_INTEL_82424	0x0483
+#define PCI_DEVICE_ID_INTEL_82378	0x0484
+#define PCI_DEVICE_ID_INTEL_82430	0x0486
+#define PCI_DEVICE_ID_INTEL_82434	0x04a3
+#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
+#define PCI_DEVICE_ID_INTEL_82092AA_1	0x1222
+#define PCI_DEVICE_ID_INTEL_7116	0x1223
+#define PCI_DEVICE_ID_INTEL_82596	0x1226
+#define PCI_DEVICE_ID_INTEL_82865	0x1227
+#define PCI_DEVICE_ID_INTEL_82557	0x1229
+#define PCI_DEVICE_ID_INTEL_82437	0x122d
+#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
+#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
+#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
+#define PCI_DEVICE_ID_INTEL_82437MX	0x1235
+#define PCI_DEVICE_ID_INTEL_82441	0x1237
+#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
+#define PCI_DEVICE_ID_INTEL_82439	0x1250
+#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
+#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
+#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
+#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
+#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
+#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
+#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
+#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
+#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
+#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
+#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
+#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
+#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
+#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
+#define PCI_DEVICE_ID_INTEL_P6		0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
+
+#define PCI_VENDOR_ID_KTI		0x8e2e
+#define PCI_DEVICE_ID_KTI_ET32P2	0x3000
+
+#define PCI_VENDOR_ID_ADAPTEC		0x9004
+#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
+#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
+#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
+#define PCI_DEVICE_ID_ADAPTEC_5800	0x5800
+#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
+#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
+#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
+#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
+#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
+#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
+#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
+#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
+#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
+#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
+#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
+#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
+#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
+#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
+#define PCI_DEVICE_ID_ADAPTEC_1030	0x8b78
+
+#define PCI_VENDOR_ID_ADAPTEC2		0x9005
+#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
+#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
+#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
+#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
+
+#define PCI_VENDOR_ID_ATRONICS		0x907f
+#define PCI_DEVICE_ID_ATRONICS_2015	0x2015
+
+#define PCI_VENDOR_ID_HOLTEK		0x9412
+#define PCI_DEVICE_ID_HOLTEK_6565	0x6565
+
+#define PCI_VENDOR_ID_TIGERJET		0xe159
+#define PCI_DEVICE_ID_TIGERJET_300	0x0001
+
+#define PCI_VENDOR_ID_ARK		0xedd8
+#define PCI_DEVICE_ID_ARK_STING		0xa091
+#define PCI_DEVICE_ID_ARK_STINGARK	0xa099
+#define PCI_DEVICE_ID_ARK_2000MT	0xa0a1
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices.  The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ *	7:3 = slot
+ *	2:0 = function
+ */
+#define PCI_DEVFN(slot,func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn)		((devfn) & 0x07)
+
+/*
+ * Error values that may be returned by the PCI bios.
+ */
+#define PCIBIOS_SUCCESSFUL		0x00
+#define PCIBIOS_FUNC_NOT_SUPPORTED	0x81
+#define PCIBIOS_BAD_VENDOR_ID		0x83
+#define PCIBIOS_DEVICE_NOT_FOUND	0x86
+#define PCIBIOS_BAD_REGISTER_NUMBER	0x87
+#define PCIBIOS_SET_FAILED		0x88
+#define PCIBIOS_BUFFER_TOO_SMALL	0x89
+
+/* T. Straumann, 7/31/2001: increased to 32 - PMC slots are not
+ * scanned on mvme2306 otherwise
+ */
+#define PCI_MAX_DEVICES			32
+#define PCI_MAX_FUNCTIONS		8
+
+typedef struct  {
+        int (*read_config_byte)(unsigned char, unsigned char,  unsigned char,
+			       unsigned char, unsigned char *);
+	int (*read_config_word)(unsigned char, unsigned char,  unsigned char,
+			       unsigned char, unsigned short *);
+	int (*read_config_dword)(unsigned char, unsigned char,  unsigned char,
+			       unsigned char, unsigned int *);
+	int (*write_config_byte)(unsigned char, unsigned char,  unsigned char,
+			       unsigned char, unsigned char);
+	int (*write_config_word)(unsigned char, unsigned char,  unsigned char,
+			       unsigned char, unsigned short);
+	int (*write_config_dword)(unsigned char, unsigned char,  unsigned char,
+			       unsigned char, unsigned int);
+}pci_config_access_functions;
+
+typedef struct {
+  unsigned int	pci_config_addr;
+  unsigned int	pci_config_data;
+  /*  const pci_config_access_functions*	pci_functions;*/
+} pci_config;
+
+extern pci_config BSP_pci_config[2];
+
+#ifndef PCI_MAIN
+extern int PCIx_read_config_byte();
+extern int PCIx_read_config_word();
+extern int PCIx_read_config_dword();
+extern int PCIx_write_config_byte();
+extern int PCIx_write_config_word();
+extern int PCIx_write_config_dword();
+
+extern int pci_read_config_byte(unsigned char bus, unsigned char dev,unsigned char func,unsigned char offset,unsigned char *val);
+extern int pci_read_config_word(unsigned char bus, unsigned char dev,unsigned char func, unsigned char offset, unsigned short *val);
+extern int pci_read_config_dword(unsigned char bus, unsigned char dev,unsigned char func, unsigned char offset, unsigned int *val);
+extern int pci_write_config_byte();
+extern int pci_write_config_word();
+extern int pci_write_config_dword();
+
+/*
+ * Return the number of PCI busses in the system
+ */
+extern unsigned char BusCountPCI();
+extern void InitializePCI();
+#endif
+
+int BSP_PCIxFindDevice(unsigned short vendorid, unsigned short deviceid,
+		       int instance, int pciNum, int *pbus, int *pdev, int *pfun );
+int BSP_pciFindDevice(unsigned short vendorid, unsigned short deviceid,
+                int instance, int *pbus, int *pdev, int *pfun);
+
+#endif /* RTEMS_PCI_H */
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/pci_interface.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/pci_interface.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/pci_interface.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,171 @@
+/* pci_interface.c
+ *
+ * Copyright 2004, Brookhaven National Laboratory and
+ *                 Shuchen Kate Feng <feng1@bnl.gov>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution.
+ *
+ */
+#include <libcpu/io.h>
+#include <rtems/bspIo.h>	    /* printk */
+
+#include <bsp.h>
+#include <bsp/pci.h>
+#include <bsp/gtreg.h>
+#include <bsp/gtpcireg.h> 
+
+#define PCI_DEBUG     0
+
+/* Please reference the GT64260B datasheet, for the PCI interface, 
+ * Synchronization Barriers and PCI ordering.
+ *
+ * Some PCI devices require Synchronization Barriers or PCI ordering
+ * for synchronization.  For example, the VME-OMS58 motor controller we
+ * used at NSLS requires either enhanced CPU Synchronization Barrier
+ * or PCI-ordering (only one mechanism allowed. See section 11.1.2).
+ * To use the former mechanism(default), one needs to call 
+ * CPU0_PciEnhanceSync() or CPU1_PciEnhanceSync() to perform software
+ * synchronization between the CPU and PCI activities.
+ * 
+ * To use the PCI-ordering, one can call pciToCpuSync() to trigger
+ * the PCI-to-CPU sync barrier after the out_xx(). In this mode,
+ * PCI configuration reads suffer sync barrier latency. Please reference
+ * the datasheet to explore other options.
+ *
+ * Note : If PCI_ORDERING is needed for the PCI0, while disabling the
+ * deadlock  for the PCI0, one should keep the CommDLEn bit enabled
+ * for the deadlock mechanism so that the 10/100 MB ethernet will
+ * function correctly.
+ *
+ */
+#define PCI_ORDERING
+
+/*#define PCI_DEADLOCK*/
+
+/*  So far, I do not see the need to disable the address pipelining.
+#define DIS_ADDR_PIPELINE*/
+
+#ifdef PCI_ORDERING
+#define PCI_ACCCTLBASEL_VALUE          0x01009000
+#else
+#define PCI_ACCCTLBASEL_VALUE          0x01001000
+#endif
+
+#define ConfSBDis     0x10000000  /* 1: disable, 0: enable */
+#define IOSBDis       0x20000000  /* 1: disable, 0: enable */
+#define ConfIOSBDis   0x30000000
+#define CpuPipeline   0x00002000  /* optional, 1:enable, 0:disable */
+
+#define CPU0_SYNC_TRIGGER   0xD0  /* CPU0 Sync Barrier trigger */
+#define CPU0_SYNC_VIRTUAL   0xC0  /* CPU0 Sync Barrier Virtual */
+
+#define CPU1_SYNC_TRIGGER   0xD8  /* CPU1 Sync Barrier trigger */
+#define CPU1_SYNC_VIRTUAL   0xC8  /* CPU1 Sync Barrier Virtual */
+
+
+/* CPU to PCI ordering register */
+#define DLOCK_ORDER_REG    0x2D0  /* Deadlock and Ordering register */
+#define PCI0OrEn      0x00000001
+#define PCI1OrEn      0x00000020
+#define PCIOrEn       0x40000000
+#define PCIOrEnMASK   0x40000021
+
+#define CNT_SYNC_REG       0x2E0  /* Counters and Sync Barrier register */
+#define L0SyncBar     0x00001000
+#define L1SyncBar     0x00002000
+#define DSyncBar      0x00004000
+#define SyncBarMode   0x00008000
+#define SyncBarMASK   0x0000f000
+
+#define WRTBK_PRIO_BUFFER  0x2d8  /* writback priority and buffer depth */
+
+#define ADDR_PIPELINE 0x00020000
+
+void PCI_interface()
+{
+  unsigned int data;
+
+#if  (defined(PCI_ORDERING)||defined(DIS_ADDR_PIPELINE))
+  data = inl(0); /* needed : read to flush */
+  /* MOTLOad default disables Configuration and I/O Read Sync Barrier 
+   * which is needed for enhanced CPU sync. barrier  */
+#ifdef PCI_ORDERING
+  /* enable Configuration Read Sync Barrier and IO read Sync Barrier*/
+  data &= ~ConfIOSBDis;
+#endif
+#ifdef DIS_ADDR_PIPELINE
+  data &= ~ADDR_PIPELINE;
+
+#if PCI_DEBUG
+  printk("data %x\n", data);
+#endif
+#endif
+  outl(data, 0);
+  /* read polling of the register until the new data is being read */
+  while ( inl(0)!=data);
+#endif
+
+#ifdef PCI_DEADLOCK
+  outl(0x07fff600, CNT_SYNC_REG);
+#endif
+#ifdef PCI_ORDERING
+  outl(0xc0060002, DLOCK_ORDER_REG);
+  outl(0x07fff600, CNT_SYNC_REG);
+#else
+  outl(inl(PCI0_CMD_CNTL)|PCI_COMMAND_SB_DIS, PCI0_CMD_CNTL);
+#endif
+
+  /* asserts SERR upon various detection */
+  outl(0x3fffff, 0xc28);
+
+}
+
+/* Use MOTLoad default for Writeback Priority and Buffer Depth 
+ */
+void pciAccessInit(int PciNum)
+{
+  unsigned int data;
+
+  /* MOTLoad combines the two banks of SDRAM into
+   * one PCI access control because the top = 0x1ff
+   */
+  data = inl(GT_SCS0_Low_Decode) & 0xfff; 
+  data |= PCI_ACCCTLBASEL_VALUE;
+  data &= ~0x300000;
+  outl(data, PCI0_ACCESS_CNTL_BASE0_LOW+(PciNum * 0x80));
+#if PCI_DEBUG
+  printk("PCI%d_ACCESS_CNTL_BASE0_LOW 0x%x\n",PciNum,inl(PCI0_ACCESS_CNTL_BASE0_LOW+(PciNum * 0x80))); 
+#endif
+
+}
+
+/* Sync Barrier Trigger. A write to the CPU_SYNC_TRIGGER register triggers
+ * the sync barrier process.  The three bits, define which buffers should
+ * be flushed.
+ * Bit 0 = PCI0 slave write buffer.
+ * Bit 1 = PCI1 slave write buffer.
+ * Bit 2 = SDRAM snoop queue.
+ */
+void CPU0_PciEnhanceSync(unsigned int syncVal)
+{
+  outl(syncVal,CPU0_SYNC_TRIGGER);
+  while (inl(CPU0_SYNC_VIRTUAL));
+}
+
+void CPU1_PciEnhanceSync(unsigned int syncVal)
+{
+  outl(syncVal,CPU1_SYNC_TRIGGER);
+  while (inl(CPU1_SYNC_VIRTUAL));
+}
+
+/* Currently, if PCI_ordering is used for synchronization, configuration
+ * reads is programmed to be the PCI slave "synchronization barrier" 
+ * cycles. 
+ */
+void pciToCpuSync(int pci_num)
+{
+  unsigned char data;
+
+  PCIx_read_config_byte(pci_num, 0,0,0,4, &data);
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/pci/pcifinddevice.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/pci/pcifinddevice.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/pci/pcifinddevice.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,66 @@
+/* pcifinddevice.c
+ *
+ * Copyright 2001,  Till Straumann <strauman@slac.stanford.edu> 
+ *
+ * find a particular PCI device
+ * (we assume, the firmware configured the PCI bus[es] for us)
+ *
+ * 
+ * Kate Feng <feng1@bnl.gov>, modified it to support
+ * the mvme5500 board and provided glues to Till's vmeUniverse.c.
+ *
+ */
+
+#define PCI_INVALID_VENDORDEVICEID	0xffffffff
+#define PCI_MULTI_FUNCTION			0x80
+
+/*#define PCI_DEBUG*/
+
+#include <bsp/pci.h>
+#include <rtems/bspIo.h>
+
+int BSP_PCIxFindDevice(unsigned short vendorid, unsigned short deviceid,
+     int instance, int pciNum, int *pbus, int *pdev, int *pfun )
+{
+  unsigned int d;
+  unsigned short s;
+  unsigned char bus,dev,fun,hd;
+
+  for (bus=0; bus<2; bus++) {
+      for (dev=0; dev<PCI_MAX_DEVICES; dev++) {
+	  PCIx_read_config_byte(pciNum, bus, dev, 0, PCI0_HEADER_TYPE, &hd);
+	  hd = (hd & PCI_MULTI_FUNCTION ? PCI_MAX_FUNCTIONS : 1);
+     	  for (fun=0; fun<hd; fun++) {
+	      /* 
+	       * The last devfn id/slot is special; must skip it
+	       */
+	      if (PCI_MAX_DEVICES-1==dev && PCI_MAX_FUNCTIONS-1 == fun)
+		 break;
+	      (void)PCIx_read_config_dword(pciNum, bus,dev,fun,PCI0_VENDOR_ID,&d);
+     	      if (PCI_INVALID_VENDORDEVICEID == d)
+		 continue;
+#ifdef PCI_DEBUG
+	      printk("BSP_pciFindDevice: found 0x%08x at %d/%d/%d\n",d,bus,dev,fun);
+#endif
+	      (void)PCIx_read_config_word(pciNum, bus,dev,fun,PCI0_VENDOR_ID,&s);
+      	      if (vendorid != s)
+           	 continue;
+	      (void)PCIx_read_config_word(pciNum, bus,dev,fun,PCI0_DEVICE_ID,&s);
+	      if (deviceid == s) {
+		 if (instance--) continue;
+		 *pbus=bus; *pdev=dev; *pfun=fun;
+		 return 0;
+	      }
+	  }
+      }
+  }  /* end for bus */
+  return -1;
+}
+
+int BSP_pciFindDevice( unsigned short vendorid, unsigned short deviceid,
+                   int instance, int *pbus, int *pdev, int *pfun )
+{
+  return(BSP_PCIxFindDevice(vendorid,deviceid,instance,0,pbus,pdev,pfun));
+}
+
+/* eof */
Index: c/src/lib/libbsp/powerpc/mvme5500/start/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/start/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/start/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,46 @@
+##
+## $Id$
+##
+
+## use a prefix for sake of clarity.
+## mvme5500start contains both, the preloader and the
+## start file
+MVME5500_PREFIX = mvme5500
+
+VPATH = @srcdir@:@srcdir@/../../shared/start
+
+PGM = $(ARCH)/$(MVME5500_PREFIX)start.$(OBJEXT)
+
+S_FILES = preload.S start.S rtems_crti.S
+S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = preload.S
+
+OBJS = $(ARCH)/preload.$(OBJEXT) $(ARCH)/start.$(OBJEXT)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+bsplib_DATA =  $(PROJECT_RELEASE)/lib/$(MVME5500_PREFIX)start$(LIB_VARIANT).$(OBJEXT)
+bsplib_DATA += $(PROJECT_RELEASE)/lib/rtems_crti.$(OBJEXT)
+
+$(PROJECT_RELEASE)/lib/$(MVME5500_PREFIX)start$(LIB_VARIANT).$(OBJEXT): $(PGM)
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_RELEASE)/lib/rtems_crti.$(OBJEXT): $(ARCH)/rtems_crti.$(OBJEXT)
+	$(INSTALL_DATA) $< $@
+
+TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/$(MVME5500_PREFIX)start$(LIB_VARIANT).$(OBJEXT)
+TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/rtems_crti.$(OBJEXT)
+
+all-local: $(ARCH) $(S_O_FILES) $(PGM) $(TMPINSTALL_FILES)
+
+$(OBJS):$(ARCH)
+
+$(PGM):	$(OBJS)
+	$(LD) -r -o $@ $^
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/start/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/start/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/start/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,541 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../../shared/start
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+MVME5500_PREFIX = mvme5500
+
+PGM = $(ARCH)/$(MVME5500_PREFIX)start.$(OBJEXT)
+
+S_FILES = preload.S start.S rtems_crti.S
+S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.$(OBJEXT))
+
+EXTRA_DIST = preload.S
+
+OBJS = $(ARCH)/preload.$(OBJEXT) $(ARCH)/start.$(OBJEXT)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib $(PROJECT_RELEASE)/lib/$(MVME5500_PREFIX)start$(LIB_VARIANT).$(OBJEXT) $(PROJECT_RELEASE)/lib/rtems_crti.$(OBJEXT)
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+bsplib_DATA = $(PROJECT_RELEASE)/lib/$(MVME5500_PREFIX)start$(LIB_VARIANT).$(OBJEXT) $(PROJECT_RELEASE)/lib/rtems_crti.$(OBJEXT)
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = start
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(bsplib_DATA)
+
+DIST_COMMON = $(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  start/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+bsplibDATA_INSTALL = $(INSTALL_DATA)
+install-bsplibDATA: $(bsplib_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bsplibdir)
+	@list='$(bsplib_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(bsplibDATA_INSTALL) $$d$$p $(DESTDIR)$(bsplibdir)/$$f"; \
+	  $(bsplibDATA_INSTALL) $$d$$p $(DESTDIR)$(bsplibdir)/$$f; \
+	done
+
+uninstall-bsplibDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bsplib_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(bsplibdir)/$$f"; \
+	  rm -f $(DESTDIR)$(bsplibdir)/$$f; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(bsplibdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-bsplibDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-bsplibDATA uninstall-info-am
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+	clean-local distclean distclean-generic distdir dvi dvi-am info \
+	info-am install install-am install-bsplibDATA install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am uninstall uninstall-am uninstall-bsplibDATA \
+	uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+$(PROJECT_RELEASE)/lib/$(MVME5500_PREFIX)start$(LIB_VARIANT).$(OBJEXT): $(PGM)
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_RELEASE)/lib/rtems_crti.$(OBJEXT): $(ARCH)/rtems_crti.$(OBJEXT)
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(S_O_FILES) $(PGM) $(TMPINSTALL_FILES)
+
+$(OBJS):$(ARCH)
+
+$(PGM):	$(OBJS)
+	$(LD) -r -o $@ $^
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/start/preload.S
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/start/preload.S	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/start/preload.S	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,287 @@
+/*
+ * Mini-loader for the SVGM and MVME5500 BSP.
+ *
+ * $Id$
+ *
+ * Copyright (C) 2003, 2004
+ * Author: Till Straumann, 10/2001 <strauman@slac.stanford.edu>
+ *
+ * Some ideas are borrowed from the powerpc/shared/bootloader
+ * by
+ *  Copyright (C) 1998, 1999 Gabriel Paubert, paubert@iram.es
+ *  Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
+ *
+ *
+ * The SVGM firmware is unable to load the RTEMS image below
+ * 0x2000 (I believe their stack is growing below 0x1000) ?
+ * 
+ * The code provided by this file is responsible for the performing
+ * the following steps:
+ *
+ *  1) Save commandline parameters to an area that is 
+ *       a) not covered by the downloaded image
+ *       b) will not be overwritten by the moved image
+ *          nor the final BSS segment (rtems clears BSS
+ *          before saving the command line).
+ *  2) Initialize and setup the memory controller to prepare the
+ *     SDRAM before moving the image to it.
+ *  3) Move the entire image (including this very file) to
+ *     its final location starting at 0x0000.
+ *     It is important to note that _NO_STACK_ is available
+ *     during this step. Also, there is probably no return to
+ *     Monitor because relocating RTEMS will destroy vital Monitor
+ *     data (such as its stack).
+ *  3) Flush the cache to make sure the relocated image is actually
+ *     in memory.
+ *  4) setup RTEMS environment (initial register values), most 
+ *     notably an initial STACK. The initial stack may be small and
+ *     is used by RTEMS only at a very early stage.
+ *     A safe place for the stack seems to be the 00..0x7f area.
+ *     NOTE: we should respect the MAILBOX area 0x80..0xff!
+ *  5) switch the MMU off (because that's what RTEMS is expecting
+ *     it to be at startup).
+ *  6) fire up rtems...
+ *
+ *
+ *  Calling convention:
+ *     R1: Monitor SP
+ *     R3: command line string start
+ *     R4: command line string end + 1
+ *     R5: where Monitor put the image
+ *         if R5 is 0, the preloader will use its entry point
+ *         as the image starting address.
+ *         See NOTE below.
+ *     R6: end of the image (i.e. R6-R5 is the image length)
+ *         if R6 is 0, _edata will be used as the image length
+ *         See NOTE below.
+ *
+ *     NOTE: if the symbol DONT_USE_R5_ENTRY is defined,
+ *         R5/R6 are never used and the necessary parameters are
+ *         determined at runtime (R5) / linkage (R6) [_edata]
+ *
+ *  ASSUMPTIONS:
+ *    The code RELIES on the assumption that the image will be
+ *    moved DOWNWARDS in memory and that the this loader is
+ *    prepended to the image, i.e. it is safe to do
+ *        codemove(codemove,0,codemove_end - codemove);
+ *        (*0)(codemove_end, codemove_end-codemove, __rtems_end-codemove_end);
+ *    where codemove(from, to, nbytes) is defined as
+ *        codemove(from, to, nbytes) { while (nbytes--) *(to++)=*(from++); }
+ *    Implicit to these assumptions is the assumption that the destination
+ *    address is cache block aligned.
+ *    Furthermore, the byte count is assumed to be a multiple
+ *    of four
+ *
+ */
+#if 0
+/* TODO: I dont know where the appropriate CPU model is to be defined
+ *       when including this to get PPC_CACHE_ALIGNMENT I get an error...
+ */
+#include <rtems/score/ppc.h>
+#else
+#ifndef PPC_CACHE_ALIGNMENT
+#define PPC_CACHE_ALIGNMENT	32
+#endif
+#endif
+
+#include <rtems/score/cpu.h>
+#include <asm.h>
+
+/* Note that major modifications may be needed
+ * if DESTINATION_ADDR is not 0
+ */
+#define KERNELBASE		0x0
+#define INITIAL_STACK		0x78			/* 8-byte aligned */
+#define CACHE_LINE_SIZE		PPC_CACHE_ALIGNMENT 	/* autodetect doesn't work, see below */
+#define	ASSUME_RTEMS_INSTALLS_VECTORS				/* assume we need not load vectors */
+#define DONT_USE_R5_ENTRY							/* always dynamically determine the address we're running from */
+
+	/* put this into its own section which we want to
+	 * be loaded at the very beginning. We should probably
+	 * not use more than 255 bytes.
+	 */
+	PUBLIC_VAR(__rtems_start)
+	PUBLIC_VAR(__rtems_entry_point)
+	PUBLIC_VAR(__rtems_end)
+	.section .mvme5500_preloader_section,"awx",@progbits
+preload:
+	/* find out where we are */
+	bl	here
+here:
+	/* MOTLoad had MSR_EE turned on.  Disable it.*/
+	mfmsr   r0
+	xori    r0, r0, MSR_EE
+	mtmsr   r0               
+	mflr	r5
+	addi	r5,r5,-(here-preload)
+	lis		r27,_edata@h
+	ori		r27,r27,_edata@l
+
+	/* at this point the register contents are
+	 * R3:  command line start
+	 * R4:  R3 + command line length
+	 * R5:  address we are running from / loaded to 
+	 * R27: image end
+	 */
+
+	/* save command line start */
+	mr		r6, r3
+	/* save the command line parameters if they are to be overwritten */
+	sub.	r17, r4, r3		/* string length */
+	ble		leaveparms		/* <=0 -> no parameters */
+	/* copy has to be out of the way of the bss; therefore we must
+	 * put the string out of the way of both, the current end of
+	 * the image (without bss) AND the end of the loaded image
+	 * (including bss):
+	 * |......image.........|  downloaded image
+	 * |image_bss...........|  loaded image with bss appended
+	 *
+	 *             ^ safe place for string
+	 *
+	 * the alternative scenario looks like this:
+	 * |..image.............|  downloaded image
+	 * |image_bss...........|  loaded image with bss appended
+	 *           ^ safe place for string
+	 */
+	lis		r18, __rtems_end+0x10000@h	/* round up, save one instruction */
+	add		r16, r5, r27	/* image end + 1 */
+	cmpw	r16, r18
+	bge		ishighenough
+	mr		r16,r18			/* __rtems_end is higher than
+	                                         * the image end
+					         * (without bss)
+					         */
+ishighenough:
+	cmpw	r16, r3 	    /* destination start > current string start ? */
+	ble		leaveparms		/* string already after dst, leave it */
+	/* copy string from the last byte downwards */
+	add		r6, r16, r17	/* last byte of destination + 1 */
+	mtctr	r17
+1:
+	lbzu	r3, -1(r4)
+	stbu	r3,	-1(r6)
+	bdnz	1b
+leaveparms:
+	add		r7, r6, r17		/* destination + strlen */
+
+#ifndef CACHE_LINE_SIZE
+	/* Oh well, Monitor firmware has inhibited the cache, so this
+	 * nice routine doesn't work...
+	 */
+	/* figure out the cache line size */
+	li		r16, 0x80
+	cmpw	r5, r16			/* 'from' must be > 0x80 */
+	blt		panic
+	
+1:	/* store some arbitrary, nonzero stuff in 0..0x7c */
+	stwu	r16,-4(r16)
+	cmpwi	r16,0
+	bne		1b
+	dcbz	0,r16			/* zero out one cache line */
+	subi	r16,r16,4
+2:	lwzu	r0,4(r16)		/* search for a non-zero word */
+	cmpwi	r0,0
+	beq		2b
+	/* OK, r16 now hold the size of a cache line in bytes */
+#else
+	li		r16,CACHE_LINE_SIZE
+#endif
+	
+	lis		r3,preload@h
+	ori		r3,r3,preload@l
+	mr		r4,r5			/* from-addr */
+	li		r5,_preload_size/* this is never > 16k */
+	/* now move ourselves to the link address ('preload').
+	 * We set up the LR, so domove() 'returns' to the
+	 * relocated copy
+	 */
+	lis		r0,return_here@h
+	ori		r0,r0,return_here@l
+	mtlr	r0	
+	b		domove			/* move the preloader itself */
+return_here:
+	/* now we move the entire rest of the image */
+#ifdef ASSUME_RTEMS_INSTALLS_VECTORS
+	lis		r3,__rtems_start@h
+	ori		r3,r3,__rtems_start@l
+	lis		r0,preload@h	/* calculate/adjust from address */
+	ori		r0,r0,preload@l
+	sub		r0,r3,r0
+	add		r4,r4,r0
+	sub		r5,r27,r3
+#else
+	add		r3,r3,r5		/* add preloader size to destination */
+	add		r4,r4,r5		/* and source addresses	*/
+	sub		r5,r27,r5		/* length of the remaining rest */
+#endif
+	bl		domove
+	/* OK, now everything should be in place.
+     * we are ready to start...
+	 */
+	/* R6: start of command line */
+	/* R7: end of command line +1 */
+	
+	/* setup initial stack for rtems early boot */
+	lis		r1, INITIAL_STACK
+	/* disable the MMU and fire up rtems */
+	mfmsr	r0
+	ori 	r0,r0,MSR_IR|MSR_DR|MSR_IP
+	xori	r0,r0,MSR_IR|MSR_DR
+	mtsrr1	r0
+	lis		r0,__rtems_entry_point@h
+	ori		r0,r0,__rtems_entry_point@l
+	mtsrr0	r0
+	rfi
+
+    /* domove(to, from, nbytes):
+     *
+     * move a R5 bytes from R4 to R3 and flush
+     * the caches for the destination memory
+     * region. R16 provides the cache line size.
+     * DESTROYS: R0, R17, R18, CTR, CR
+     */
+domove:
+	addi	r0,r5,3			/* convert to word count */
+	srwi.	r0,r0,2
+	beq	3f					/* nothing to do */
+	cmpw	r3,r4			/* from == to ?  */
+	beq 3f
+	mtctr	r0
+	la		r18,-4(r4)
+	la		r17,-4(r3)
+1:	lwzu	r0,4(r18)
+	stwu	r0,4(r17)
+	bdnz	1b				/* move data */
+	/* now, we must flush the destination cache region */
+#ifndef CACHE_LINE_SIZE
+	cmpwi	r16,0
+	beq		3f				/* nothing to do */
+#endif
+#if defined(CACHE_LINE_SIZE) && CACHE_LINE_SIZE > 0
+	add	r17,r3,r5		/* target end pointer */
+	subi	r0,r16,1
+	add	r17,r17,r0
+	andc	r17,r17,r0		/* cache aligned target end pointer */
+	mr	r18,r3
+2:	cmpw	r18,r17
+	dcbst	0,r18			/* write out data cache line */
+	icbi	0,r18			/* invalidate corresponding i-cache line */
+	add	r18,r18,r16
+	blt	2b
+	sync		               /*  make sure data is written back */
+	isync		               /*  invalidate possibly preloaded instructions */
+#endif
+3:
+	blr
+
+#if !defined(CACHE_LINE_SIZE)
+panic:
+	li		r10,0x63
+	mfmsr	r0
+	ori		r0,r0,MSR_IP
+	mtmsr	r0
+	sc
+#endif
+
+/* DONT PUT ANY CODE BELOW HERE */
+_preload_size = . - preload
Index: c/src/lib/libbsp/powerpc/mvme5500/start/start.S
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/start/start.S	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/start/start.S	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,219 @@
+/*
+ *  start.S :	  RTEMS entry point
+ *
+ *  Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
+ *
+ *  S. Kate Feng <feng1@bnl.gov>, April 2004
+ *  Mapped the 2nd 256MB of RAM to support the MVME5500 boards.
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ * 
+ */
+
+#include <asm.h>
+#include <rtems/score/cpu.h>
+#include <libcpu/io.h>
+
+#define SYNC \
+	sync; \
+	isync
+
+#define KERNELBASE	0x0
+#define MEM256MB        0x10000000
+	
+#define MONITOR_ENTER			\
+	mfmsr	r10		;	\
+	ori	r10,r10,MSR_IP	;	\
+	mtmsr	r10		;	\
+	li	r10,0x63	;	\
+	sc
+
+		
+	.text
+	.globl	__rtems_entry_point
+	.type	__rtems_entry_point,@function
+__rtems_entry_point:
+#ifdef DEBUG_EARLY_START
+	MONITOR_ENTER
+#endif	
+		
+/* 
+ * PREP
+ * This is jumped to on prep systems right after the kernel is relocated
+ * to its proper place in memory by the boot loader.  The expected layout
+ * of the regs is:	
+ *   r3: ptr to residual data
+ *   r4: initrd_start or if no initrd then 0
+ *   r5: initrd_end - unused if r4 is 0
+ *   r6: Start of command line string
+ *   r7: End of command line string
+ *
+ *   The Prep boot loader insure that the MMU is currently off...
+ *
+ */
+	
+	mr	r31,r3			/* save parameters */
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+	/*
+	 * Make sure we have nothing in BATS and TLB
+	 */
+	bl	clear_bats
+	bl	flush_tlbs
+/*
+ * Use the first pair of BAT registers to map the 1st 256MB
+ * of RAM to KERNELBASE. 
+ */
+	lis	r11,KERNELBASE@h
+	ori	r11,r11,0x1ffe		/* set up BAT0 registers for 604+ */
+	li	r8,2			/* R/W access */
+	isync
+	mtspr	DBAT0L,r8		/* N.B. 6xx (not 601) have valid */
+	mtspr	DBAT0U,r11		/* bit in upper BAT register */
+	mtspr	IBAT0L,r8
+	mtspr	IBAT0U,r11
+	isync
+/*
+ * Use the 2nd pair of BAT registers to map the 2nd 256MB
+ * of RAM to 0x10000000. <SKF>
+ */
+	lis	r11,MEM256MB@h
+	ori	r11,r11,0x1ffe		/* set up BAT1 registers for 604+ */
+	lis	r8,MEM256MB@h
+	ori     r8,r8,2
+	isync
+	mtspr	DBAT1L,r8		/* N.B. 6xx (not 601) have valid */
+	mtspr	DBAT1U,r11		/* bit in upper BAT register */
+	mtspr	IBAT1L,r8
+	mtspr	IBAT1U,r11	
+	isync
+
+/*
+ * we now have the two 256M of ram mapped with the bats. We are still 
+ * running on the bootloader stack and cannot switch to an RTEMS allocated 
+ * init stack before copying the residual data that may have been set just
+ * after rtems_end address. This bug has been experienced on MVME2304. Thank
+ * to Till Straumann <strauman@SLAC.Stanford.EDU> for hunting it and
+ * suggesting the appropriate code.
+ */
+	
+enter_C_code:
+	bl	MMUon
+	bl  __eabi	/* setup EABI and SYSV environment */
+	bl	zero_bss
+	/*
+	 * restore prep boot params
+	 */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27 
+	bl	save_boot_params
+	/*
+	 * stack = &__rtems_end + 4096
+	 */
+	addis	r9,r0, __rtems_end+(4096-CPU_MINIMUM_STACK_FRAME_SIZE)@ha
+        addi	r9,r9, __rtems_end+(4096-CPU_MINIMUM_STACK_FRAME_SIZE)@l
+	mr	r1, r9
+	/*
+	 * We are know in a environment that is totally independent from bootloader setup.
+	 */
+        lis	r5,environ@ha
+        la	r5,environ@l(r5)	/* environp */
+	li	r4, 0			/* argv */
+	li	r3, 0			/* argc */
+	bl	boot_card
+	bl	_return_to_ppcbug
+	
+	.globl  MMUon
+	.type	MMUon,@function
+MMUon:	
+	mfmsr	r0
+#if (PPC_HAS_FPU == 0)
+	ori	r0,r0, MSR_IP | MSR_RI | MSR_IR | MSR_DR | MSR_EE | MSR_FE0 | MSR_FE1 | MSR_FP
+	xori	r0, r0, MSR_EE | MSR_IP | MSR_FP
+#else
+	ori	r0,r0, MSR_IP | MSR_RI | MSR_IR | MSR_DR | MSR_EE | MSR_FE0 | MSR_FE1 | MSR_FP
+	xori	r0, r0, MSR_EE | MSR_IP | MSR_FE0 | MSR_FE1
+#endif
+	mflr	r11
+	mtsrr0	r11
+	mtsrr1	r0
+	SYNC
+	rfi
+	
+	.globl  MMUoff
+	.type	MMUoff,@function
+MMUoff:	
+	mfmsr	r0
+	ori	r0,r0,MSR_IR| MSR_DR | MSR_IP
+	mflr	r11
+	xori	r0,r0,MSR_IR|MSR_DR
+	mtsrr0	r11
+	mtsrr1	r0
+	SYNC
+	rfi
+
+	.globl	_return_to_ppcbug
+	.type	_return_to_ppcbug,@function
+
+	
+_return_to_ppcbug:
+	mflr	r30
+	bl	MMUoff
+	MONITOR_ENTER
+	bl	MMUon
+	mtctr	r30
+	bctr	
+
+/* 
+ * An undocumented "feature" of 604e requires that the v bit
+ * be cleared before changing BAT values.
+ *
+ * Also, newer IBM firmware does not clear bat3 and 4 so
+ * this makes sure it's done.
+ *  -- Cort 
+ */
+clear_bats:
+	li	r20,0
+	mfspr	r9,PVR
+	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
+	cmpwi	r9, 1
+	SYNC
+	beq	1f
+	mtspr	DBAT0U,r20
+	mtspr	DBAT0L,r20	
+	mtspr	DBAT1U,r20
+	mtspr	DBAT1L,r20
+	mtspr	DBAT2U,r20
+	mtspr	DBAT2L,r20	
+	mtspr	DBAT3U,r20
+	mtspr	DBAT3L,r20
+1:	
+	mtspr	IBAT0U,r20
+	mtspr	IBAT0L,r20
+	mtspr	IBAT1U,r20
+	mtspr	IBAT1L,r20
+	mtspr	IBAT2U,r20
+	mtspr	IBAT2L,r20
+	mtspr	IBAT3U,r20
+	mtspr	IBAT3L,r20
+	SYNC	
+	blr
+
+flush_tlbs:
+	lis	r20, 0x1000
+1:	addic.	r20, r20, -0x1000
+	tlbie	r20
+	bgt	1b
+	sync
+	blr
+	
+
+	.comm	environ,4,4
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,37 @@
+##
+## $Id$
+##
+
+VPATH = @srcdir@:@srcdir@/../../shared/startup:@srcdir@/../../../shared
+
+INCLUDES = -I @srcdir@/../GT64260
+
+C_FILES = bootcard.c main.c bspstart.c bspclean.c bsppost.c bsplibc.c \
+	sbrk.c gnatinstallhandler.c builddate.c pgtbl_setup.c \
+	pgtbl_activate.c reboot.c
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+builddate.c::
+	echo 'char *BSP_build_date="'`date +%Y%m%d%Z%T`'";' > builddate.c
+
+OBJS = $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+bsplib_DATA = linkcmds
+
+$(PROJECT_RELEASE)/lib/linkcmds: linkcmds
+	$(INSTALL_DATA) $< $@
+
+TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds
+
+all-local: $(ARCH) $(OBJS) $(TMPINSTALL_FILES) 
+
+EXTRA_DIST = linkcmds bspstart.c bspclean.c bootpstuff.c reboot.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,538 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../../shared/startup:@srcdir@/../../../shared
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+INCLUDES = -I @srcdir@/../GT64260
+
+C_FILES = bootcard.c main.c bspstart.c bspclean.c bsppost.c bsplibc.c \
+	sbrk.c gnatinstallhandler.c builddate.c pgtbl_setup.c \
+	pgtbl_activate.c reboot.c
+
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib $(PROJECT_RELEASE)/lib/linkcmds
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+bsplib_DATA = linkcmds
+
+EXTRA_DIST = linkcmds bspstart.c bspclean.c bootpstuff.c reboot.c
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = startup
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(bsplib_DATA)
+
+DIST_COMMON = $(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  startup/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+bsplibDATA_INSTALL = $(INSTALL_DATA)
+install-bsplibDATA: $(bsplib_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bsplibdir)
+	@list='$(bsplib_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(bsplibDATA_INSTALL) $$d$$p $(DESTDIR)$(bsplibdir)/$$f"; \
+	  $(bsplibDATA_INSTALL) $$d$$p $(DESTDIR)$(bsplibdir)/$$f; \
+	done
+
+uninstall-bsplibDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bsplib_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(bsplibdir)/$$f"; \
+	  rm -f $(DESTDIR)$(bsplibdir)/$$f; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(bsplibdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-bsplibDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-bsplibDATA uninstall-info-am
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+	clean-local distclean distclean-generic distdir dvi dvi-am info \
+	info-am install install-am install-bsplibDATA install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am uninstall uninstall-am uninstall-bsplibDATA \
+	uninstall-info-am
+
+
+builddate.c::
+	echo 'char *BSP_build_date="'`date +%Y%m%d%Z%T`'";' > builddate.c
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+$(PROJECT_RELEASE)/lib/linkcmds: linkcmds
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(OBJS) $(TMPINSTALL_FILES) 
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/bootpstuff.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/bootpstuff.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/bootpstuff.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,71 @@
+
+#define FLAG_MAND	1
+#define FLAG_NOUSE	2	/* dont put into the commandline at all */
+#define FLAG_CLRBP  4	/* field needs to be cleared for bootp  */
+
+typedef struct ParmRec_ {
+	char	*name;
+	char	**pval;
+	int		flags;
+} ParmRec, *Parm;
+
+
+static char *boot_filename=0;
+static char *boot_srvname=0;
+static char *boot_use_bootp=0;
+static char	*boot_my_ip=0;
+static char	*boot_my_netmask=0;
+
+#define boot_cmdline BSP_commandline_string
+
+static ParmRec parmList[]={
+	{ "BP_FILE=",  &boot_filename,
+			FLAG_MAND,
+	},
+	{ "BP_PARM=",  &boot_cmdline,
+			0,
+	},
+	{ "BP_SRVR=",  &boot_srvname,
+			FLAG_MAND,
+	},
+	{ "BP_GTWY=",  &net_config.gateway,
+			FLAG_CLRBP, 
+	},
+	{ "BP_MYIP=",  &boot_my_ip,
+			FLAG_MAND | FLAG_CLRBP,
+	},
+	{ "BP_MYMK=",  &boot_my_netmask,
+			FLAG_MAND | FLAG_CLRBP,
+	},
+	{ "BP_MYNM=",  &net_config.hostname,
+			FLAG_CLRBP,
+	},
+	{ "BP_MYDN=",  &net_config.domainname,
+			FLAG_CLRBP,
+	},
+	{ "BP_LOGH=",  &net_config.log_host,
+			FLAG_CLRBP,
+	},
+	{ "BP_DNS1=",  &net_config.name_server[0],
+			FLAG_CLRBP,
+	},
+	{ "BP_DNS2=",  &net_config.name_server[1],
+			FLAG_CLRBP,
+	},
+	{ "BP_DNS3=",  &net_config.name_server[2],
+			FLAG_CLRBP,
+	},
+	{ "BP_NTP1=",  &net_config.ntp_server[0],
+			FLAG_CLRBP,
+	},
+	{ "BP_NTP2=",  &net_config.ntp_server[1],
+			FLAG_CLRBP,
+	},
+	{ "BP_NTP3=",  &net_config.ntp_server[2],
+			FLAG_CLRBP,
+	},
+	{ "BP_ENBL=",  &boot_use_bootp,
+			0,
+	},
+	{ 0, }
+};
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/bspclean.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/bspclean.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/bspclean.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,18 @@
+#include <bsp.h>
+#include <rtems/bspIo.h>
+#include <libcpu/stackTrace.h>
+
+#define AUTO_BOOT 0
+
+void bsp_cleanup(void)
+{
+#if AUTO_BOOT
+  void rtemsReboot();
+
+  rtemsReboot();
+#else
+  printk("\Printing a stack trace for your convenience :-)\n");
+  CPU_print_stack();
+  printk("RTEMS terminated; Boot manually or turn on AUTO_BOOT.\n");
+#endif
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/bspstart.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/bspstart.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/bspstart.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,625 @@
+/*
+ *  This routine starts the application.  It includes application,
+ *  board, and monitor specific initialization and configuration.
+ *  The generic CPU dependent initialization has been performed
+ *  before this routine is invoked.
+ *
+ *  COPYRIGHT (c) 1989-1998.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  Modified to support the MCP750.
+ *  Modifications Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
+ *
+ *  Modified to support the Synergy VGM & Motorola PowerPC boards.
+ *  Many thanks to Till Straumann for providing assistance to port the 
+ *  BSP_pgtbl_xxx().
+ *  (C) by Till Straumann, <strauman@slac.stanford.edu>, 2002, 2004
+ *
+ *  Modified to support the MVME5500 board
+ *  (C) by S. Kate Feng <feng1@bnl.gov>, 2003, 2004
+ *
+ */
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+
+#include <rtems/system.h>
+#include <rtems/libio.h>
+#include <rtems/libcsupport.h>
+/*#include <bsp/consoleIo.h>*/
+#include <libcpu/spr.h>   /* registers.h is included here */
+#include <bsp.h>
+#include <bsp/uart.h>
+#include <bsp/pci.h>
+#include <libcpu/bat.h>
+#include <libcpu/pte121.h>
+#include <libcpu/cpuIdent.h>
+#include <bsp/vectors.h>
+#include <bsp/bspException.h>
+
+/* for RTEMS_VERSION :-( I dont like the preassembled string */
+#include <rtems/sptables.h>
+
+#ifdef __RTEMS_APPLICATION__
+#undef __RTEMS_APPLICATION__
+#endif
+
+/*
+#define SHOW_MORE_INIT_SETTINGS
+#define SHOW_LCR1_REGISTER
+#define SHOW_LCR2_REGISTER
+#define SHOW_LCR3_REGISTER
+#define CONF_VPD
+*/
+
+/* there is no public Workspace_Free() variant :-( */
+#include <rtems/score/wkspace.h>
+
+rtems_unsigned32
+_bsp_sbrk_init(rtems_unsigned32 heap_start, rtems_unsigned32 *heap_size_p);
+
+/* provide access to the command line parameters */
+char *BSP_commandline_string = 0;
+
+BSP_output_char_function_type BSP_output_char = BSP_output_char_via_serial;
+
+extern char *BSP_build_date;
+extern void _return_to_ppcbug();
+extern unsigned long __rtems_end[];
+extern void L1_caches_enables();
+extern unsigned get_L1CR(), get_L2CR(), get_L3CR();
+extern unsigned set_L2CR(unsigned);
+extern void bsp_cleanup(void);
+extern Triv121PgTbl BSP_pgtbl_setup();
+extern void BSP_pgtbl_activate();
+extern int I2Cread_eeprom();
+extern void BSP_vme_config(void);
+
+SPR_RW(SPRG0)
+SPR_RW(SPRG1)
+
+typedef struct CmdLineRec_ {
+		unsigned long	size;
+		char		buf[0];
+} CmdLineRec, *CmdLine;
+
+
+#define	mtspr(reg, val)	\
+	__asm __volatile("mtspr %0,%1" : : "K"(reg), "r"(val))
+
+
+#define	mfspr(reg) \
+	( { unsigned val; \
+	  __asm __volatile("mfspr %0,%1" : "=r"(val) : "K"(reg)); \
+	  val; } )
+
+/*
+ * Copy Additional boot param passed by boot loader
+ */
+#define MAX_LOADER_ADD_PARM 80
+char loaderParam[MAX_LOADER_ADD_PARM];
+
+/*
+ * Total memory using RESIDUAL DATA
+ */
+unsigned int BSP_mem_size;
+/*
+ * PCI Bus Frequency
+ */
+unsigned int BSP_bus_frequency;
+/*
+ * processor clock frequency
+ */
+unsigned int BSP_processor_frequency;
+/*
+ * Time base divisior (how many tick for 1 second).
+ */
+unsigned int BSP_time_base_divisor;
+unsigned char ConfVPD_buff[200];
+
+/*
+ * system init stack and soft ir stack size
+ */
+#define INIT_STACK_SIZE 0x1000
+#define INTR_STACK_SIZE CONFIGURE_INTERRUPT_STACK_MEMORY
+
+/* calculate the heap start */
+static unsigned long
+heapStart(void)
+{
+unsigned long rval;
+    rval = ((rtems_unsigned32) __rtems_end) +INIT_STACK_SIZE + INTR_STACK_SIZE;
+    if (rval & (CPU_ALIGNMENT-1))
+        rval = (rval + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
+	return rval;
+}
+
+void BSP_panic(char *s)
+{
+  printk("%s PANIC %s\n",_RTEMS_version, s);
+  __asm__ __volatile ("sc"); 
+}
+
+void _BSP_Fatal_error(unsigned int v)
+{
+  printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
+  __asm__ __volatile ("sc"); 
+}
+ 
+/*
+ *  The original table from the application and our copy of it with
+ *  some changes.
+ */
+
+extern rtems_configuration_table Configuration;
+
+rtems_configuration_table  BSP_Configuration;
+
+rtems_cpu_table Cpu_table;
+
+char *rtems_progname;
+
+/*
+ *  Use the shared implementations of the following routines
+ */
+ 
+extern void bsp_postdriver_hook(void); /* see c/src/lib/libbsp/shared/bsppost.c */
+
+extern void bsp_libc_init( void *, unsigned32, int );
+
+/*
+ *  Function:   bsp_pretasking_hook
+ *  Created:    95/03/10
+ *
+ *  Description:
+ *      BSP pretasking hook.  Called just before drivers are initialized.
+ *      Used to setup libc and install any BSP extensions.
+ *
+ *  NOTES:
+ *      Must not use libc (to do io) from here, since drivers are
+ *      not yet initialized.
+ *
+ */
+
+void bsp_pretasking_hook(void)
+{
+    rtems_unsigned32        heap_start=heapStart();    
+    rtems_unsigned32        heap_size,heap_sbrk_spared;
+    char		    *buf;
+    extern rtems_unsigned32 _bsp_sbrk_init(rtems_unsigned32, rtems_unsigned32*);
+
+    heap_size = (BSP_mem_size - heap_start) - BSP_Configuration.work_space_size;
+
+    heap_sbrk_spared=_bsp_sbrk_init(heap_start, &heap_size);
+
+#ifdef SHOW_MORE_INIT_SETTINGS
+   	printk(" HEAP start %x  size %x (%x bytes spared for sbrk)\n", heap_start, heap_size, heap_sbrk_spared);
+#endif    
+
+    bsp_libc_init((void *) 0, heap_size, heap_sbrk_spared);
+
+#ifdef RTEMS_DEBUG
+    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
+#endif
+}
+
+void zero_bss()
+{
+  /* prevent these from being accessed in the short data areas */
+  extern unsigned long __bss_start[], __sbss_start[], __sbss_end[];
+  extern unsigned long __sbss2_start[], __sbss2_end[];
+  memset(__sbss_start, 0, ((unsigned) __sbss_end) - ((unsigned)__sbss_start));
+  memset(__sbss2_start, 0, ((unsigned) __sbss2_end) - ((unsigned)__sbss2_start));
+  memset(__bss_start, 0, ((unsigned) __rtems_end) - ((unsigned)__bss_start));
+}
+
+/* NOTE: we cannot simply malloc the commandline string;
+ * save_boot_params() is called during a very early stage when
+ * libc/malloc etc. are not yet initialized!
+ *
+ * Here's what we do:
+ *
+ * initial layout setup by the loader (preload.S):
+ *
+ * 0..RTEMS...__rtems_end | cmdline ....... TOP
+ *
+ * After the save_boot_params() routine returns, the stack area will be
+ * set up (start.S):
+ *
+ * 0..RTEMS..__rtems_end | INIT_STACK | IRQ_STACK | ..... TOP
+ *
+ * initialize_executive_early() [called from boot_card()]
+ * will initialize the workspace:
+ *
+ * 0..RTEMS..__rtems_end | INIT_STACK | IRQ_STACK | ...... | workspace | TOP
+ *
+ * and later calls our pretasking_hook() which ends up initializing
+ * libc which in turn initializes the heap
+ *
+ * 0..RTEMS..__rtems_end | INIT_STACK | IRQ_STACK | heap | workspace | TOP
+ *
+ * The idea here is to first move the commandline to the future 'heap' area
+ * from where it will be picked up by our pretasking_hook().
+ * pretasking_hook() then moves it either to INIT_STACK or the workspace
+ * area using proper allocation, initializes libc and finally moves
+ * the data to the environment / malloced areas...
+ */
+
+/* this routine is called early at shared/start/start.S 
+ * and must be safe with a not properly aligned stack
+ */
+void
+save_boot_params(void *r3, void *r4, void* r5, char *cmdline_start, char *cmdline_end)
+{
+int		i=cmdline_end-cmdline_start;
+CmdLine future_heap=(CmdLine)heapStart();
+
+ 	/* get the string out of the stack area into the future heap region;
+	 * assume there's enough memory...
+	 */
+	memmove(future_heap->buf,cmdline_start,i);
+	/* make sure there's an end of string marker */
+	future_heap->buf[i++]=0;
+	future_heap->size=i;
+}
+
+
+/* Configure and enable the L3CR */
+void config_enable_L3CR(unsigned l3cr)
+{
+	unsigned x;
+
+	/* By The Book (numbered steps from section 3.7.3.1 of MPC7450UM) */				
+	/*
+	 * 1: Set all L3CR bits for final config except L3E, L3I, L3PE, and
+	 *    L3CLKEN.  (also mask off reserved bits in case they were included
+	 *    in L3CR_CONFIG)
+	 */
+	l3cr &= ~(L3CR_L3E|L3CR_L3I|L3CR_LOCK_745x|L3CR_L3PE|L3CR_L3CLKEN|L3CR_RESERVED);
+	mtspr(L3CR, l3cr);
+
+	/* 2: Set L3CR[5] (otherwise reserved bit) to 1 */
+	l3cr |= 0x04000000;
+	mtspr(L3CR, l3cr);
+
+	/* 3: Set L3CLKEN to 1*/
+	l3cr |= L3CR_L3CLKEN;
+	mtspr(L3CR, l3cr);
+
+	/* 4/5: Perform a global cache invalidate (ref section 3.7.3.6) */
+	__asm __volatile("dssall;sync");
+	/* L3 cache is already disabled, no need to clear L3E */
+	mtspr(L3CR, l3cr|L3CR_L3I);
+
+	do {
+	       x = mfspr(L3CR);
+	} while (x & L3CR_L3I);
+	
+	/* 6: Clear L3CLKEN to 0 */
+	l3cr &= ~L3CR_L3CLKEN;
+	mtspr(L3CR, l3cr);
+
+	/* 7: Perform a 'sync' and wait at least 100 CPU cycles */
+	__asm __volatile("sync");
+	rtems_bsp_delay_in_bus_cycles(100);
+
+	/* 8: Set L3E and L3CLKEN */
+	l3cr |= (L3CR_L3E|L3CR_L3CLKEN);
+	mtspr(L3CR, l3cr);
+
+	/* 9: Perform a 'sync' and wait at least 100 CPU cycles */
+	__asm __volatile("sync");
+
+	rtems_bsp_delay_in_bus_cycles(100);
+}
+
+/*
+ *  bsp_start
+ *
+ *  This routine does the bulk of the system initialization.
+ */
+
+void bsp_start( void )
+{
+  int i;
+  unsigned char *stack;
+  unsigned long	 *r1sp;
+  unsigned l1cr, l2cr, l3cr;
+  register unsigned char* intrStack;
+  register unsigned int intrNestingLevel = 0;
+  unsigned char *work_space_start;
+  ppc_cpu_id_t myCpu;
+  ppc_cpu_revision_t myCpuRevision;
+  Triv121PgTbl	pt=0;
+  /*
+   * Get CPU identification dynamically. Note that the get_ppc_cpu_type() function
+   * store the result in global variables so that it can be used latter...
+   */
+  myCpu 	= get_ppc_cpu_type();
+  myCpuRevision = get_ppc_cpu_revision();
+
+  /*
+   * enables L1 Cache. Note that the L1_caches_enables() codes checks for
+   * relevant CPU type so that the reason why there is no use of myCpu...
+   *
+   * MOTLoad default is good. Otherwise, one would have to disable L2, L3
+   * first before settting L1.  Then L1->L2->L3.
+   * 
+   L1_caches_enables();*/
+  
+#ifdef SHOW_LCR1_REGISTER
+  l1cr = get_L1CR();
+  printk("Initial L1CR value = %x\n", l1cr); 
+#endif
+
+  /*
+   * the initial stack  has aready been set to this value in start.S
+   * so there is no need to set it in r1 again... It is just for info
+   * so that it can be printed without accessing R1.
+   */
+  stack = ((unsigned char*) __rtems_end) + INIT_STACK_SIZE - CPU_MINIMUM_STACK_FRAME_SIZE;
+
+ /* tag the bottom (T. Straumann 6/36/2001 <strauman@slac.stanford.edu>) */
+  *((unsigned32 *)stack) = 0;
+
+  /* fill stack with pattern for debugging */
+  __asm__ __volatile__("mr %0, %%r1":"=r"(r1sp));
+  while (--r1sp >= (unsigned long*)__rtems_end)
+	  *r1sp=0xeeeeeeee;
+
+  /*
+   * Initialize the interrupt related settings
+   * SPRG0 = interrupt nesting level count
+   * SPRG1 = software managed IRQ stack
+   *
+   * This could be done latter (e.g in IRQ_INIT) but it helps to understand
+   * some settings below...
+   */
+  intrStack = ((unsigned char*) __rtems_end) + INIT_STACK_SIZE + INTR_STACK_SIZE - CPU_MINIMUM_STACK_FRAME_SIZE;
+
+  /* make sure it's properly aligned */
+  (unsigned32)intrStack &= ~(CPU_STACK_ALIGNMENT-1);
+
+  /* tag the bottom (T. Straumann 6/36/2001 <strauman@slac.stanford.edu>) */
+  *((unsigned32 *)intrStack) = 0;
+
+  _write_SPRG1((unsigned int)intrStack);
+  _write_SPRG0(PPC_BSP_HAS_FIXED_PR288);
+
+  /*
+   * Initialize default raw exception hanlders. See vectors/vectors_init.c
+   */
+  initialize_exceptions();
+  /*
+   * Init MMU block address translation to enable hardware
+   * access
+   * More PCI1 memory mapping to be done after BSP_pgtbl_activate.
+   */
+  /*
+   * PCI 0 domain memory space, want to leave room for the VME window 
+   */
+  setdbat(2, PCI0_MEM_BASE, PCI0_MEM_BASE, 0x10000000, IO_PAGE);
+
+  /* map the PCI 0, 1 Domain I/O space, GT64260B registers
+   * and the reserved area so that the size is the power of 2.
+   */
+  setdbat(3,PCI0_IO_BASE, PCI0_IO_BASE, 0x2000000, IO_PAGE);
+
+  printk("-----------------------------------------\n");
+  printk("Welcome to %s on MVME5500-0163\n", _RTEMS_version );
+  printk("Build Date: %s\n",BSP_build_date);
+  printk("-----------------------------------------\n");
+
+#ifdef TEST_RETURN_TO_PPCBUG  
+  printk("Hit <Enter> to return to PPCBUG monitor\n");
+  printk("When Finished hit GO. It should print <Back from monitor>\n");
+  debug_getc();
+  _return_to_ppcbug();
+  printk("Back from monitor\n");
+  _return_to_ppcbug();
+#endif /* TEST_RETURN_TO_PPCBUG  */
+
+#ifdef TEST_RAW_EXCEPTION_CODE  
+  printk("Testing exception handling Part 1\n");
+  /*
+   * Cause a software exception
+   */
+  __asm__ __volatile ("sc");
+  /*
+   * Check we can still catch exceptions and returned coorectly.
+   */
+  printk("Testing exception handling Part 2\n");
+  __asm__ __volatile ("sc");
+#endif  
+
+  BSP_mem_size 				=  _512M;
+  /* TODO: calculate the BSP_bus_frequency using the REF_CLK bit of System Status  register */
+  /* rtems_bsp_delay_in_bus_cycles are defined in registers.h */
+  BSP_bus_frequency			= 133333333;
+  BSP_processor_frequency		= 1000000000;
+  BSP_time_base_divisor			= 4000;/* P94 : 7455 clocks the TB/DECR at 1/4 of the system bus clock frequency */
+
+
+  /* Maybe not setup yet becuase of the warning message */
+  /* Allocate and set up the page table mappings
+   * This is only available on >604 CPUs.
+   *
+   * NOTE: This setup routine may modify the available memory
+   *       size. It is essential to call it before
+   *       calculating the workspace etc.
+   */
+  pt = BSP_pgtbl_setup(&BSP_mem_size);
+  if (!pt)
+     printk("WARNING: unable to setup page tables.\n");
+
+  printk("Now BSP_mem_size = 0x%x\n",BSP_mem_size); 
+
+  /*
+   * Set up our hooks
+   * Make sure libc_init is done before drivers initialized so that
+   * they can use atexit()
+   */
+
+  Cpu_table.pretasking_hook 	 = bsp_pretasking_hook;    /* init libc, etc. */
+  Cpu_table.postdriver_hook 	 = bsp_postdriver_hook;
+  Cpu_table.do_zero_of_workspace = TRUE;
+  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
+  /* P94 : 7455 TB/DECR is clocked by the system bus clock frequency */
+  Cpu_table.clicks_per_usec 	 = BSP_bus_frequency/(BSP_time_base_divisor * 1000);
+  Cpu_table.exceptions_in_RAM 	 = TRUE;
+  _CPU_Table                     = Cpu_table;/* <skf> for rtems_bsp_delay() */
+
+  printk("BSP_Configuration.work_space_size = %x\n", BSP_Configuration.work_space_size); 
+  work_space_start = 
+    (unsigned char *)BSP_mem_size - BSP_Configuration.work_space_size;
+
+  if ( work_space_start <= ((unsigned char *)__rtems_end) + INIT_STACK_SIZE + INTR_STACK_SIZE) {
+    printk( "bspstart: Not enough RAM!!!\n" );
+    bsp_cleanup();
+  }
+
+  BSP_Configuration.work_space_start = work_space_start;
+
+  /*
+   * Initalize RTEMS IRQ system
+   */
+   BSP_rtems_irq_mng_init(0);
+
+  /*
+   * Enable L2 Cache. Note that the set_L2CR(L2CR) codes checks for
+   * relevant CPU type (mpc750)...
+   *
+   * It also takes care of flushing the cache under certain conditions:
+   *   current    going to (E==enable, I==invalidate)
+   *     E           E | I	-> __NOT_FLUSHED_, invalidated, stays E
+   *     E               I	-> flush & disable, invalidate
+   *     E           E		-> nothing, stays E
+   *     0           E | I	-> not flushed, invalidated, enabled
+   *     0             | I	-> not flushed, invalidated, stays off
+   *     0           E      -> not flushed, _NO_INVALIDATE, enabled
+   *
+   * The first and the last combinations are potentially dangerous!
+   *
+   * NOTE: we assume the essential cache parameters (speed, size etc.)
+   *       have been set correctly by the firmware!
+   *
+   */
+#ifdef SHOW_LCR2_REGISTER
+  l2cr = get_L2CR();
+  printk("Initial L2CR value = %x\n", l2cr);
+#endif  
+#if 0
+  /* Again, MOTload setup seems to be fine. Otherwise, one would
+   * have to disable the L3 cahce, then R2 ->R3
+   */
+  if ( -1 != (int)l2cr ) {
+	/* -1 would mean that this machine doesn't support L2 */
+
+	l2cr &= ~( L2CR_LOCK_745x); /* clear 'data only' and 'instruction only' */
+	l2cr |= L2CR_L3OH0;    /* L3 output hold 0 should be set */
+	if ( ! (l2cr & L2CR_L2E) ) {
+	    /* we are going to enable the L2 - hence we
+	     * MUST invalidate it first; however, if
+	     * it was enabled already, we MUST NOT
+	     * invalidate it!!
+	     */
+	     l2cr |= L2CR_L2E | L2CR_L2I;
+	     l2cr=set_L2CR(l2cr);
+        }
+	l2cr=set_L2CR(l2cr);
+  }
+#endif
+
+#ifdef SHOW_LCR3_REGISTER
+  /* L3CR needs DEC int. handler installed for bsp_delay()*/
+  l3cr = get_L3CR();
+  printk("Initial L3CR value = %x\n", l3cr);
+#endif  
+
+#if 0 
+  /* Again, use the MOTLoad default for L3CR again */
+  if ( -1 != (int)l3cr ) {
+ 	/* -1 would mean that this machine doesn't support L3 */
+        /* BSD : %2 , SDRAM late wirte
+	   l3cr |= L3SIZ_2M|L3CLK_20|L3RT_PIPELINE_LATE; */
+        /* MOTLOad :0xDF826000-> %5, 4 clocks sample point,3 p-clocks SP */
+        l3cr |= L3CR_L3PE| L3SIZ_2M|L3CLK_50|L3CKSP_4|L3PSP_3;
+
+	/* TOCHECK MOTload had L2 cache enabled, try to set nothing first */
+	if ( !(l3cr & L3CR_L3E)) {
+           l3cr |= L3CR_L3E | L3CR_L3I;
+	   config_enable_L3CR(l3cr);
+        }
+  }
+#endif
+
+  /* Activate the page table mappings only after
+   * initializing interrupts because the irq_mng_init()
+   * routine needs to modify the text
+   */           
+  if (pt) {
+#ifdef SHOW_MORE_INIT_SETTINGS
+    printk("Page table setup finished; will activate it NOW...\n");
+#endif
+    BSP_pgtbl_activate(pt);
+  }
+
+  /*
+   * PCI 1 domain memory space
+   */
+  setdbat(1, PCI1_MEM_BASE, PCI1_MEM_BASE, 0x10000000, IO_PAGE);
+ 
+
+#ifdef SHOW_MORE_INIT_SETTINGS
+  printk("Going to start PCI buses scanning and initialization\n");
+#endif  
+  InitializePCI();
+#ifdef SHOW_MORE_INIT_SETTINGS
+  printk("Number of PCI buses found is : %d\n", BusCountPCI());
+#endif
+
+  /* Install our own exception handler (needs PCI) */
+  globalExceptHdl = BSP_exceptionHandler;
+
+  /* clear hostbridge errors. MCP signal is not used on the MVME5500
+   * PCI config space scanning code will trip otherwise :-(
+   */
+  _BSP_clear_hostbridge_errors(0, 1 /*quiet*/);
+
+  /*
+   * Initialize VME bridge - needs working PCI
+   * and IRQ subsystems...
+   */
+#ifdef SHOW_MORE_INIT_SETTINGS
+  printk("Going to initialize VME bridge\n");
+#endif
+  /* VME initialization is in a separate file so apps which don't use
+   * VME or want a different configuration may link against a customized
+   * routine.
+   */
+  BSP_vme_config();
+
+  /* Read Configuration Vital Product Data (VPD) */
+  if ( I2Cread_eeprom(0xa8, 4,2, &ConfVPD_buff[0], 150))
+     printk("I2Cread_eeprom() error \n");
+  else {
+#ifdef CONF_VPD
+    printk("\n");
+    for (i=0; i<150; i++) {
+      printk("%2x ", ConfVPD_buff[i]);  
+      if ((i % 20)==0 ) printk("\n");
+    }
+    printk("\n");
+#endif
+  }
+
+#ifdef SHOW_MORE_INIT_SETTINGS
+  printk("MSR %x \n", _read_MSR());
+  printk("Exit from bspstart\n");
+#endif
+
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/linkcmds
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/linkcmds	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/linkcmds	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,302 @@
+OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc",
+              "elf32-powerpc")
+OUTPUT_ARCH(powerpc)
+ENTRY(_start)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+PROVIDE (__stack = 0);
+
+
+MEMORY {
+        BOTTOM  : ORIGIN = 0, LENGTH = 0x100
+	VECTORS	: ORIGIN = 0x100 ,  LENGTH = 0x3000-0x100
+	CODE : ORIGIN = 0x3000 , LENGTH = 0x400000 
+}
+SECTIONS
+{
+  /* discard the 'shared/vector.S' entry point section */
+  /DISCARD/ :
+  {
+ 	*(.entry_point_section)
+  }
+
+
+  .vectors :
+  {
+	/* should be the first thing... */
+	*(.mvme5500_preloader_section)
+
+   /*
+    * This section is used only if NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL
+    * is defined in vectors/vectors.S
+    *  *(.vectors)
+    * We actually RELY on dynamic vector installation since we need
+    * this space for the preloader...
+    */
+  } > VECTORS
+
+
+  /* START OF THE LOADED IMAGE (parts moved by the preloader) */
+  .image_start :
+  {
+	__rtems_start = ABSOLUTE(.);
+  } > CODE
+
+  /* Read-only sections, merged into text segment: */
+  .interp   : { *(.interp) }	> CODE
+  .hash           : { *(.hash)          }	> CODE
+  .dynsym         : { *(.dynsym)                }	> CODE
+  .dynstr         : { *(.dynstr)                }	> CODE
+  .gnu.version   : { *(.gnu.version)      }	> CODE
+  .gnu.version_d   : { *(.gnu.version_d)  }	> CODE
+  .gnu.version_r   : { *(.gnu.version_r)  }	> CODE
+  .rela.text     :
+    { *(.rela.text) *(.rela.gnu.linkonce.t*) }	> CODE
+  .rela.data     :
+    { *(.rela.data) *(.rela.gnu.linkonce.d*) }	> CODE
+  .rela.rodata   :
+    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }	> CODE
+  .rela.got       : { *(.rela.got)      }	> CODE
+  .rela.got1      : { *(.rela.got1)     }	> CODE
+  .rela.got2      : { *(.rela.got2)     }	> CODE
+  .rela.ctors     : { *(.rela.ctors)    }	> CODE
+  .rela.dtors     : { *(.rela.dtors)    }	> CODE
+  .rela.init      : { *(.rela.init)     }	> CODE
+  .rela.fini      : { *(.rela.fini)     }	> CODE
+  .rela.bss       : { *(.rela.bss)      }	> CODE
+  .rela.plt       : { *(.rela.plt)      }	> CODE
+  .rela.sdata     : { *(.rela.sdata)    }	> CODE
+  .rela.sbss      : { *(.rela.sbss)     }	> CODE
+  .rela.sdata2    : { *(.rela.sdata2)   }	> CODE
+  .rela.sbss2     : { *(.rela.sbss2)    }	> CODE
+
+  .init			  : { *(.init)			} >CODE
+
+  .text      :	
+  {
+    *(.text)	
+ 
+    /*
+     * Special FreeBSD sysctl sections.
+     */
+    . = ALIGN (16);
+    __start_set_sysctl_set = .;
+    *(set_sysctl_*);
+    __stop_set_sysctl_set = ABSOLUTE(.);
+    *(set_domain_*);
+    *(set_pseudo_*);
+ 
+   /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+  }  > CODE
+
+  .fini			  : { _fini = .; *(.fini)	} >CODE
+  .rodata         : { *(.rodata*) *(.gnu.linkonce.r*) }	> CODE
+  .rodata1        : { *(.rodata1) }	> CODE
+_SDA2_BASE_ = __SDATA2_START__ + 0x8000;
+  .sdata2         : { *(.sdata2) *(.gnu.linkonce.s2.*)  }	> CODE
+  .sbss2          : { 
+    				PROVIDE (__sbss2_start = .);
+					  *(.sbss2) *(.gnu.linkonce.sb2.*)
+    				PROVIDE (__sbss2_end = .);
+					}	> CODE
+  .eh_frame	      : { *.(eh_frame)		} >CODE
+  _etext = .;
+  PROVIDE (etext = .);
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  It would
+     be more correct to do this:
+       . = ALIGN(0x40000) + (ALIGN(8) & (0x40000 - 1));
+     The current expression does not correctly handle the case of a
+     text segment ending precisely at the end of a page; it causes the
+     data segment to skip a page.  The above expression does not have
+     this problem, but it will currently (2/95) cause BFD to allocate
+     a single segment, combining both text and data, for this case.
+     This will prevent the text segment from being shared among
+     multiple executions of the program; I think that is more
+     important than losing a page of the virtual address space (note
+     that no actual memory is lost; the page which is skipped can not
+     be referenced).  */
+ .data  ALIGN(0x1000)  :
+  {
+	PROVIDE(__DATA_START__ = ABSOLUTE(.) );
+    *(.data)
+    *(.gnu.linkonce.d*)	
+    CONSTRUCTORS
+  } > CODE
+  .data1   : { *(.data1) }	> CODE
+  PROVIDE (__EXCEPT_START__ = .);
+  .gcc_except_table   : { *(.gcc_except_table) } > CODE
+  PROVIDE (__EXCEPT_END__ = .);
+  .got1           : { *(.got1) }	> CODE
+  .dynamic        : { *(.dynamic) }	> CODE
+  /* Put .ctors and .dtors next to the .got2 section, so that the pointers
+     get relocated with -mrelocatable. Also put in the .fixup pointers.
+     The current compiler no longer needs this, but keep it around for 2.7.2  */
+                PROVIDE (_GOT2_START_ = .);
+  .got2           :  { *(.got2) }	> CODE
+/*
+                PROVIDE (__CTOR_LIST__ = .);
+  .ctors          : { *(.ctors) }	> CODE
+                PROVIDE (__CTOR_END__ = .);
+*/
+  .ctors :
+  {
+    KEEP(*crtbegin.o(.ctors))
+    KEEP(*(EXCLUDE_FILE(*crtend.o) .ctors))
+    KEEP(*(SORT(.ctors.*)))
+    KEEP(*(.ctors))
+  } > CODE
+  .dtors :
+  {
+    KEEP(*crtbegin.o(.dtors))
+    KEEP(*(EXCLUDE_FILE(*crtend.o) .dtors))
+    KEEP(*(SORT(.dtors.*)))
+    KEEP(*(.dtors))
+  } > CODE
+/*
+                PROVIDE (__DTOR_LIST__ = .);
+  .dtors          : { *(.dtors) }	> CODE
+                PROVIDE (__DTOR_END__ = .);
+*/
+                PROVIDE (_FIXUP_START_ = .);
+  .fixup          : { *(.fixup) }	> CODE
+                PROVIDE (_FIXUP_END_ = .);
+                PROVIDE (_GOT2_END_ = .);
+                PROVIDE (_GOT_START_ = .);
+  .got            : { *(.got) }	> CODE
+  .got.plt        : { *(.got.plt) }	> CODE
+                PROVIDE (_GOT_END_ = .);
+
+  .jcr            : { KEEP (*(.jcr)) } > CODE
+
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+_SDA_BASE_ = __SDATA_START__ + 0x8000;
+  .sdata          : { *(.sdata) *(.gnu.linkonce.s.*) }	> CODE
+  _edata  =  .;
+  PROVIDE (edata = .);
+/* END OF THE LOADED IMAGE (parts moved by the preloader) */
+/* BELOW THIS POINT, NO LOADABLE ITEMS MUST APPEAR */
+  .sbss      :
+  {
+    PROVIDE (__sbss_start = ABSOLUTE(.));
+    *(.sbss)
+    *(.scommon)
+    *(.dynsbss)
+    PROVIDE (__sbss_end = ABSOLUTE(.));
+  } > CODE
+  .plt   : { *(.plt) }	> CODE
+  .bss       :
+  {
+   PROVIDE (__bss_start = ABSOLUTE(.));
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  . = ALIGN(16);
+  } > CODE
+  /* proper alignment for SYSV stack
+   * (init stack is allocated just after __rtems_end
+   */
+  . = ALIGN(16);
+  _end = . ;
+  __rtems_end = . ;
+  PROVIDE (end = .);
+  /DISCARD/ : 
+  {
+    *(.comment)
+  }
+
+
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+  
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+  
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+  /* These must appear regardless of  .  */
+}
+
+/* "Conditional linking" is not supported, unfortunately.
+ * This BSP supports getting a network configuration
+ * from NVRAM settings. Hence, the startup code must
+ * access the 'rtems_bsdnet_config' structure.
+ * However, that symbol (and a couple of other networking
+ * related symbols) should only be referenced if the application
+ * actually does networking - otherwise a lot of
+ * code would pulled in from the libnetworking.a under
+ * all circumstances.
+ *
+ * bspstart.c uses these alias names and determines
+ * at runtime if they are void or valid (by comparing
+ * against the NULL address).
+ *
+ * Unfortunately, it is not possible to conditionally
+ * declare a symbol 'EXTERN' - hence we must rely on
+ * other code (probably cross-references within
+ * libnetworking itself) causing a reference to the
+ * 'real' symbols...
+ */
+
+__BSP_wrap_rtems_bsdnet_bootp_boot_file_name =
+	DEFINED(rtems_bsdnet_bootp_boot_file_name) ?
+		rtems_bsdnet_bootp_boot_file_name
+		: 0 ;
+__BSP_wrap_rtems_bsdnet_bootp_cmdline =
+	DEFINED(rtems_bsdnet_bootp_cmdline) ?
+		rtems_bsdnet_bootp_cmdline
+		: 0 ;
+__BSP_wrap_rtems_bsdnet_bootp_server_address =
+	DEFINED(rtems_bsdnet_bootp_server_address) ?
+		rtems_bsdnet_bootp_server_address
+		: 0 ;
+__BSP_wrap_rtems_bsdnet_config =
+	DEFINED(rtems_bsdnet_config) ?
+		rtems_bsdnet_config
+		: 0 ;
+__BSP_wrap_rtems_bsdnet_do_bootp =
+	DEFINED(rtems_bsdnet_do_bootp) ?
+		rtems_bsdnet_do_bootp
+		: 0 ;
+__BSP_wrap_inet_pton =
+	DEFINED(inet_pton) ?
+		inet_pton
+		: 0 ;
+__BSP_wrap_rtems_bsdnet_loopattach =
+	DEFINED(rtems_bsdnet_loopattach) ?
+		rtems_bsdnet_loopattach
+		: 0 ;
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/pgtbl_activate.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/pgtbl_activate.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/pgtbl_activate.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,37 @@
+/* pgtbl_activate.c,v 1.1.2.1 2003/02/20 21:45:49 joel Exp */
+
+#include <rtems.h>
+#include <libcpu/pte121.h>
+#include <libcpu/bat.h>
+
+/* Default activation of the page tables. This is a weak
+ * alias, so applications may easily override this
+ * default activation procedure.
+ */
+
+/* Author: Till Straumann, <strauman@slac.stanford.edu>, 4/2002 
+ * Kate Feng <feng1@bnl.gov> ported it to MVME5500, 4/2004
+ */
+
+void
+BSP_pgtbl_activate(Triv121PgTbl) __attribute__ (( weak, alias("__BSP_default_pgtbl_activate") ));
+
+void
+__BSP_default_pgtbl_activate(Triv121PgTbl pt)
+{
+	if (!pt) return;
+
+	/* switch the text/ro sements to RO only after
+	 * initializing the interrupts because the irq_mng
+	 * installs some code...
+	 *
+	 * activate the page table; it is still masked by the
+	 * DBAT0, however
+	 */
+	triv121PgTblActivate(pt);
+
+	/* finally, switch off DBAT0 & DBAT1 */
+	setdbat(0,0,0,0,0);
+	setdbat(1,0,0,0,0);  /* <skf> */
+	/* At this point, DBAT0 is available for other use... */
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/startup/reboot.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/startup/reboot.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/startup/reboot.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,16 @@
+#include <rtems.h>
+#include <bsp.h>
+#include <rtems/bspIo.h>
+#include <libcpu/io.h>
+#include <libcpu/stackTrace.h>
+
+void rtemsReboot()
+{
+
+  printk("\Printing a stack trace for your convenience :-)\n");
+  CPU_print_stack();
+
+  printk("RTEMS terminated; Rebooting ...\n");
+  /* Mvme5500 board reset  <skf> */
+  out_8((volatile unsigned char*) (GT64260_DEV1_BASE +2), 0x80);
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/tod/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/tod/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/tod/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,24 @@
+##
+## Makefile.am,v 1.6 2002/12/17 15:10:31 ralf Exp
+##
+
+
+VPATH = @srcdir@:@srcdir@/../../../shared
+
+C_FILES = todcfg.c tod.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/tod/todcfg.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/tod/todcfg.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/tod/todcfg.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,36 @@
+/*
+ * This file contains the RTC driver table for Motorola shared BSPs.
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license/LICENSE.
+ *
+ * $Id$
+ */
+
+#include <bsp.h>
+#include <libchip/rtc.h>
+#include <libchip/m48t08.h>
+
+/* The following table configures the RTC drivers used in this BSP */
+rtc_tbl RTC_Table[] = {
+    {
+        "/dev/rtc",                /* sDeviceName */
+        RTC_M48T08,                /* deviceType */
+        &m48t08_fns,               /* pDeviceFns */
+        rtc_probe,                 /* deviceProbe */
+        NULL,                      /* pDeviceParams */
+        0xF1117FF8,                /* ulCtrlPort1 */
+        0x00,                      /* ulDataPort */
+        m48t08_get_register,       /* getRegister */
+        m48t08_set_register        /* setRegister */
+    }
+};
+
+/* Some information used by the RTC driver */
+
+#define NUM_RTCS (sizeof(RTC_Table)/sizeof(rtc_tbl))
+
+unsigned long RTC_Count = NUM_RTCS;
+
+rtems_device_minor_number RTC_Minor;
Index: c/src/lib/libbsp/powerpc/mvme5500/vectors/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vectors/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vectors/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,47 @@
+##
+## $Id$
+##
+
+VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../shared/vectors
+
+C_FILES = vectors_init.c exceptionhandler.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+H_FILES = ../../shared/vectors/vectors.h bspException.h
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = ../../shared/vectors/vectors.h bspException.h
+
+S_FILES = vectors.S
+S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(S_O_FILES) $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+EXTRA_DIST = bspException.h exceptionhandler.c
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/vectors.h: ../../shared/vectors/vectors.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/bspException.h: bspException.h
+	$(INSTALL_DATA) $< $@
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/vectors.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bspException.h
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/vectors/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vectors/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vectors/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,597 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../console:@srcdir@/../../shared/vectors
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+C_FILES = vectors_init.c exceptionhandler.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+H_FILES = ../../shared/vectors/vectors.h bspException.h
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = ../../shared/vectors/vectors.h bspException.h
+
+S_FILES = vectors.S
+S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(S_O_FILES) $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+EXTRA_DIST = bspException.h exceptionhandler.c
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/vectors.h $(PROJECT_INCLUDE)/bsp/bspException.h
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = vectors
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_bsp_HEADERS)
+
+DIST_COMMON = $(include_bsp_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  vectors/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+include_bspHEADERS_INSTALL = $(INSTALL_HEADER)
+install-include_bspHEADERS: $(include_bsp_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f"; \
+	  $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+uninstall-include_bspHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(include_bspdir)/$$f"; \
+	  rm -f $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake $(distdir)/../../shared/vectors
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-include_bspHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-include_bspHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic clean-local ctags distclean distclean-generic \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-include_bspHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-include_bspHEADERS uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/vectors.h: ../../shared/vectors/vectors.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/bspException.h: bspException.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(ARCH) $(PREINSTALL_FILES) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/vectors/bspException.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vectors/bspException.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vectors/bspException.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,57 @@
+#ifndef BSP_EXCEPTION_HANDLER_H
+#define BSP_EXCEPTION_HANDLER_H
+/* $Id$ */
+
+/* A slightly improved exception 'default' exception handler for RTEMS / SVGM */
+
+/* Author: Till Straumann <strauman@slac.stanford.edu>, 2002/5 */
+
+#include <bsp/vectors.h>
+
+/* Two types of exception intercepting / catching is supported:
+ *
+ *  - lowlevel handling (runs at IRQ level, before restoring any
+ *    task context).
+ *  - highlevel handling.
+ *
+ *  A lowlevel user hook is invoked twice, before and after processing
+ *  (printing) the exception.
+ *  If the user hook returns a nonzero value, normal processing
+ *  is skipped (including the second call to the hook)
+ *
+ *  If the hook returns nonzero to the second call, no default
+ *  'panic' occurs.
+ *
+ *  Default 'panic':
+ *   - if a task context is available:
+ *     - if a highlevel handler is installed, pass control
+ *       to the highlevel handler when returning from the
+ *       exception (the highlevel handler should probably
+ *       do a longjmp()). Otherwise:
+ * 	   - try to suspend interrupted task.
+ *   - hang if no task context is available.
+ *
+ */
+
+typedef struct BSP_ExceptionExtensionRec_ *BSP_ExceptionExtension;
+
+typedef int (*BSP_ExceptionHookProc)(BSP_Exception_frame *frame, BSP_ExceptionExtension ext, int after);
+
+typedef struct BSP_ExceptionExtensionRec_ {
+	BSP_ExceptionHookProc	lowlevelHook;
+	int						quiet;			/* silence the exception handler */
+	void					(*highlevelHook)(BSP_ExceptionExtension);
+	/* user fields may be added after this */
+} BSP_ExceptionExtensionRec;
+
+#define SRR1_TEA_EXC	(1<<(31-13))
+#define SRR1_MCP_EXC	(1<<(31-12))
+
+void
+BSP_exceptionHandler(BSP_Exception_frame* excPtr);
+
+/* install an exception handler to the current task context */
+BSP_ExceptionExtension
+BSP_exceptionHandlerInstall(BSP_ExceptionExtension e);
+
+#endif
Index: c/src/lib/libbsp/powerpc/mvme5500/vectors/exceptionhandler.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vectors/exceptionhandler.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vectors/exceptionhandler.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,201 @@
+/* $Id$ */
+
+/* Copyright :
+ * (C) Author: Till Straumann <strauman@slac.stanford.edu>, 2002/5 
+ * (C) S. Kate Feng <feng1@bnl.gov> 4/2004 modified it for MVME5500
+ */
+
+#include <bsp.h>
+#include <bsp/vectors.h>
+#include <libcpu/raw_exception.h>
+#include <libcpu/spr.h>
+#include <bsp/pci.h>
+#include <rtems/bspIo.h>
+
+#include <bsp/bspException.h>
+
+#define SRR1_TEA_EXC	(1<<(31-13))
+#define SRR1_MCP_EXC	(1<<(31-12))
+
+void
+BSP_printStackTrace();
+
+
+void
+rtemsReboot(void);
+
+static volatile BSP_ExceptionExtension	BSP_exceptionExtension = 0;
+
+BSP_ExceptionExtension
+BSP_exceptionHandlerInstall(BSP_ExceptionExtension e)
+{
+volatile BSP_ExceptionExtension	test;
+	if ( RTEMS_SUCCESSFUL != rtems_task_variable_get(RTEMS_SELF, (void*)&BSP_exceptionExtension, (void**)&test) ) {
+		/* not yet added */
+		rtems_task_variable_add(RTEMS_SELF, (void*)&BSP_exceptionExtension, 0);
+	}
+	test = BSP_exceptionExtension;
+	BSP_exceptionExtension = e;
+	return test;
+}
+
+void
+BSP_exceptionHandler(BSP_Exception_frame* excPtr)
+{
+rtems_unsigned32	note;
+BSP_ExceptionExtension	ext=0;
+rtems_id		id=0;
+int			recoverable = 0;
+char			*fmt="Uhuuuh, Exception %d in unknown task???\n";
+int			quiet=0;
+	
+ if (!quiet) printk("In BSP_exceptionHandler()\n");
+   /* If we are in interrupt context, we are in trouble - skip the user
+    * hook and panic
+    */
+    if (rtems_interrupt_is_in_progress()) {
+      fmt="Aieeh, Exception %d in interrupt handler\n";
+    } else if ( !_Thread_Executing) {
+      fmt="Aieeh, Exception %d in initialization code\n";
+    } else {
+    /* retrieve the notepad which possibly holds an extention pointer */
+    if (RTEMS_SUCCESSFUL==rtems_task_ident(RTEMS_SELF,RTEMS_LOCAL,&id) &&
+#if 0
+/* Must not use a notepad due to unknown initial value (notepad memory is allocated from the
+ * workspace)!
+ */
+	        RTEMS_SUCCESSFUL==rtems_task_get_note(id, BSP_EXCEPTION_NOTEPAD, &note)
+#else
+	        RTEMS_SUCCESSFUL==rtems_task_variable_get(id, (void*)&BSP_exceptionExtension, (void**)&note)
+#endif
+         ) {
+	   ext = (BSP_ExceptionExtension)note;
+	   if (ext)
+	       quiet=ext->quiet;
+	   if (!quiet) {
+	      printk("Task (Id 0x%08x) got ",id);
+	   }
+	   fmt="exception %d\n";
+	}
+    }
+	
+    if (ext && ext->lowlevelHook && ext->lowlevelHook(excPtr,ext,0)) {
+		/* they did all the work and want us to do nothing! */
+      printk("they did all the work and want us to do nothing!\n");
+		return;
+    }
+
+    if (!quiet) {
+       /* message about exception */
+       printk(fmt, excPtr->_EXC_number);
+       /* register dump */
+       printk("\t Next PC or Address of fault = %x, ", excPtr->EXC_SRR0);
+       printk("Mvme5500 Saved MSR = %x\n", excPtr->EXC_SRR1);
+       printk("\t R0  = %08x", excPtr->GPR0);
+       printk(" R1  = %08x", excPtr->GPR1);
+       printk(" R2  = %08x", excPtr->GPR2);
+       printk(" R3  = %08x\n", excPtr->GPR3);
+       printk("\t R4  = %08x", excPtr->GPR4);
+       printk(" R5  = %08x", excPtr->GPR5);
+       printk(" R6  = %08x", excPtr->GPR6);
+       printk(" R7  = %08x\n", excPtr->GPR7);
+       printk("\t R8  = %08x", excPtr->GPR8);
+       printk(" R9  = %08x", excPtr->GPR9);
+       printk(" R10 = %08x", excPtr->GPR10);
+       printk(" R11 = %08x\n", excPtr->GPR11);
+       printk("\t R12 = %08x", excPtr->GPR12);
+       printk(" R13 = %08x", excPtr->GPR13);
+       printk(" R14 = %08x", excPtr->GPR14);
+       printk(" R15 = %08x\n", excPtr->GPR15);
+       printk("\t R16 = %08x", excPtr->GPR16);
+       printk(" R17 = %08x", excPtr->GPR17);
+       printk(" R18 = %08x", excPtr->GPR18);
+       printk(" R19 = %08x\n", excPtr->GPR19);
+       printk("\t R20 = %08x", excPtr->GPR20);
+       printk(" R21 = %08x", excPtr->GPR21);
+       printk(" R22 = %08x", excPtr->GPR22);
+       printk(" R23 = %08x\n", excPtr->GPR23);
+       printk("\t R24 = %08x", excPtr->GPR24);
+       printk(" R25 = %08x", excPtr->GPR25);
+       printk(" R26 = %08x", excPtr->GPR26);
+       printk(" R27 = %08x\n", excPtr->GPR27);
+       printk("\t R28 = %08x", excPtr->GPR28);
+       printk(" R29 = %08x", excPtr->GPR29);
+       printk(" R30 = %08x", excPtr->GPR30);
+       printk(" R31 = %08x\n", excPtr->GPR31);
+       printk("\t CR  = %08x\n", excPtr->EXC_CR);
+       printk("\t CTR = %08x\n", excPtr->EXC_CTR);
+       printk("\t XER = %08x\n", excPtr->EXC_XER);
+       printk("\t LR  = %08x\n", excPtr->EXC_LR);
+       printk("\t DAR = %08x\n", excPtr->EXC_DAR);
+	
+       BSP_printStackTrace(excPtr);
+    }
+	
+    if (ASM_MACH_VECTOR == excPtr->_EXC_number) {
+       /* ollah , we got a machine check - this could either
+	* be a TEA, MCP or internal; let's see and provide more info
+	*/
+       if (!quiet)
+	   printk("Machine check; reason:");
+       if ( ! (excPtr->EXC_SRR1 & (SRR1_TEA_EXC | SRR1_MCP_EXC)) ) {
+	   if (!quiet)
+	       printk("SRR1\n");
+       } else { 
+	   if (excPtr->EXC_SRR1 & (SRR1_TEA_EXC)) {
+	      if (!quiet)
+		 printk(" TEA");
+	   }
+	   if (excPtr->EXC_SRR1 & (SRR1_MCP_EXC)) {
+	      unsigned char c1,c2;
+	      unsigned int  l;
+	      unsigned long gerr;
+
+	      if (!quiet) printk(" MCP\n");
+
+	      /* it's MCP; gather info from the host bridge */
+ 	      gerr=_BSP_clear_hostbridge_errors(0,0);
+              if (gerr&0x80000000) printk("GT64260 Parity error\n");
+              if (gerr&0x40000000) printk("GT64260 SysErr\n");
+	      if ((!quiet) && (!gerr)) printk("GT64260 host bridge seems OK\n");
+	    }
+       }
+    } else if (ASM_DEC_VECTOR == excPtr->_EXC_number) {
+		recoverable = 1;
+    } else if (ASM_SYS_VECTOR == excPtr->_EXC_number) {
+#ifdef TEST_RAW_EXCEPTION_CODE 
+		recoverable = 1;
+#else
+		recoverable = 0;
+#endif
+    }
+
+    /* call them for a second time giving a chance to intercept
+     * the task_suspend
+     */
+    if (ext && ext->lowlevelHook && ext->lowlevelHook(excPtr, ext, 1))
+		return;
+
+    if (!recoverable) {
+		if (id) {
+			/* if there's a highlevel hook, install it */
+			if (ext && ext->highlevelHook) {
+				excPtr->EXC_SRR0 = (rtems_unsigned32)ext->highlevelHook;
+				excPtr->GPR3     = (rtems_unsigned32)ext;
+				return;
+			}
+			if (excPtr->EXC_SRR1 & MSR_FP) {
+				/* thread dispatching is _not_ disabled at this point; hence
+				 * we must make sure we have the FPU enabled...
+				 */
+				_write_MSR( _read_MSR() | MSR_FP );
+				__asm__ __volatile__("isync");
+			}
+			printk("unrecoverable exception!!! task %08x suspended\n",id);
+			rtems_task_suspend(id);
+		} else {
+			printk("PANIC, rebooting...\n");
+			rtemsReboot();
+		}
+    }
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/vme/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vme/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vme/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,51 @@
+##
+## $Id$
+## Kate Feng modified it for the MVME5500 board
+##
+
+VPATH = @srcdir@:@srcdir@/../../../shared/vmeUniverse:
+
+INCLUDES = -I @srcdir@/../vme
+
+H_FILES = VME.h VMEConfig.h
+
+C_FILES = vmeUniverse.c vmeconfig.c
+
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(C_O_FILES)
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = VMEConfig.h
+include_bsp_HEADERS += VME.h
+include_bsp_HEADERS += ../../../shared/vmeUniverse/vmeUniverse.h
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/vmeUniverse.h: vmeUniverse.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/VME.h: VME.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/VMEConfig.h: VMEConfig.h
+	$(INSTALL_DATA) $< $@
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/VME.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/VMEConfig.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/vmeUniverse.h
+
+all-local: $(PREINSTALL_FILES) $(ARCH) $(OBJS)
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+EXTRA_DIST = vmeconfig.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/vme/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vme/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vme/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,596 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+
+VPATH = @srcdir@:@srcdir@/../../../shared/vmeUniverse:
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+INCLUDES = -I @srcdir@/../vme
+
+H_FILES = VME.h VMEConfig.h
+
+C_FILES = vmeUniverse.c vmeconfig.c
+
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
+
+OBJS = $(C_O_FILES)
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+include_bspdir = $(includedir)/bsp
+include_bsp_HEADERS = VMEConfig.h VME.h ../../../shared/vmeUniverse/vmeUniverse.h
+
+PREINSTALL_FILES = $(PROJECT_INCLUDE)/bsp $(PROJECT_INCLUDE)/bsp/VME.h $(PROJECT_INCLUDE)/bsp/VMEConfig.h $(PROJECT_INCLUDE)/bsp/vmeUniverse.h
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+EXTRA_DIST = vmeconfig.c
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = vme
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+HEADERS = $(include_bsp_HEADERS)
+
+DIST_COMMON = $(include_bsp_HEADERS) \
+	$(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  vme/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+include_bspHEADERS_INSTALL = $(INSTALL_HEADER)
+install-include_bspHEADERS: $(include_bsp_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f"; \
+	  $(include_bspHEADERS_INSTALL) $$d$$p $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+uninstall-include_bspHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_bsp_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(include_bspdir)/$$f"; \
+	  rm -f $(DESTDIR)$(include_bspdir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake $(distdir)/../../../shared/vmeUniverse
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(include_bspdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-include_bspHEADERS
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-include_bspHEADERS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
+	clean-generic clean-local ctags distclean distclean-generic \
+	distclean-tags distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-include_bspHEADERS install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-include_bspHEADERS uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+$(PROJECT_INCLUDE)/bsp:
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp/vmeUniverse.h: vmeUniverse.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/VME.h: VME.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/bsp/VMEConfig.h: VMEConfig.h
+	$(INSTALL_DATA) $< $@
+
+all-local: $(PREINSTALL_FILES) $(ARCH) $(OBJS)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: c/src/lib/libbsp/powerpc/mvme5500/vme/VME.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vme/VME.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vme/VME.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,97 @@
+#ifndef RTEMS_BSP_VME_UNIVERSE_H
+#define RTEMS_BSP_VME_UNIVERSE_H
+/* VME.h,v 1.1.2.2 2003/03/25 16:46:01 joel Exp */
+
+/* SVGM et al. BSP's VME support */
+/* Author: Till Straumann, <strauman@slac.stanford.edu> */
+
+/* pull in bsp.h */
+#include <bsp.h>
+/* our VME bridge */
+#include <bsp/vmeUniverse.h>
+/* our address space configuration */
+#include <bsp/VMEConfig.h>
+
+/* VME related declarations */
+/* how to map a VME address to the CPU local bus.
+ * Note that this traverses two bridges:
+ * the grackle and the universe. For the
+ * Universe, there is a lookup procedure while
+ * we assume a 1:1 mapping for the grackle...
+ */
+
+/* NOTE about the fast mapping macros:
+ * using these macros is only safe if the user app
+ * does _NOT_ change the universe mappings!
+ * While changing the PCI windows probably doesn't
+ * make much sense (involves changing the MMU/DBATs as well),
+ * The user might wish to change the VME address
+ * layout, i.e. by remapping _VME_A32_WIN0_ON_VME
+ * and _VME_DRAM_OFFSET...
+ * Hence, using the A24 and A16 macros is probably safe.
+ */
+
+#define BSP_vme_init() \
+	vmeUniverseInit
+
+/* translate through host bridge and vme master window of vme bridge */
+static inline int
+BSP_vme2local_adrs(unsigned am, unsigned long vmeaddr, unsigned long *plocaladdr)
+{
+int rval=vmeUniverseXlateAddr(1,0,am,vmeaddr,plocaladdr);
+	*plocaladdr+=PCI_MEM_BASE;
+	return rval;
+}
+
+/* when using this macro, the universe setup MUST NOT BE
+ * CHANGED by the application...
+ */
+#define BSP_vme2local_A32_fast(vmeaddr) \
+	((vmeaddr)-_VME_A32_WIN0_ON_VME + _VME_A32_WIN0_ON_PCI + PCI_MEM_BASE)
+#define BSP_vme2local_A24_fast(vmeaddr) \
+	(((vmeaddr)&0x7ffffff)+_VME_A24_ON_PCI + PCI_MEM_BASE)
+#define BSP_vme2local_A16_fast(vmeaddr) \
+	(((vmeaddr)&0xffff)+_VME_A16_ON_PCI + PCI_MEM_BASE)
+
+/* how a CPU address is mapped to the VME bus (if at all)
+ */
+static inline int
+BSP_local2vme_adrs(unsigned am, unsigned long localaddr, unsigned long *pvmeaddr)
+{
+return vmeUniverseXlateAddr(0, 0, am,localaddr+PCI_DRAM_OFFSET,pvmeaddr);
+}
+
+#define BSP_localdram2vme_fast(localaddr) \
+	((localaddr)+_VME_DRAM_OFFSET)
+
+/* interrupt handlers and levels */
+typedef void (*BSP_VME_ISR_t)(void *usrArg, unsigned long vector);
+
+#define BSP_installVME_isr(vector, handler, arg) \
+	vmeUniverseInstallISR(vector, handler, arg)
+
+#define BSP_removeVME_isr(vector, handler, arg) \
+	vmeUniverseRemoveISR(vector, handler, arg)
+
+/* retrieve the currently installed ISR for a given vector */
+#define BSP_getVME_isr(vector, parg) \
+    vmeUniverseISRGet(vector, parg)
+
+#define BSP_enableVME_int_lvl(level) \
+	vmeUniverseIntEnable(level)
+
+#define BSP_disableVME_int_lvl(level) \
+	vmeUniverseIntDisable(level)
+
+/* Tell the interrupt manager that the universe driver
+ * already called openpic_eoi() and that this step hence
+ * must be omitted.
+ */
+#define BSP_PCI_VME_DRIVER_DOES_EOI
+/* don't reference vmeUniverse0PciIrqLine directly here - leave it up to
+ * bspstart() to set BSP_vme_bridge_irq. That way, we can generate variants
+ * of the BSP with / without the universe driver...
+ */
+extern int _BSP_vme_bridge_irq;
+
+#endif
Index: c/src/lib/libbsp/powerpc/mvme5500/vme/VMEConfig.h
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vme/VMEConfig.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vme/VMEConfig.h	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,28 @@
+#ifndef RTEMS_BSP_VME_CONFIG_H
+#define RTEMS_BSP_VME_CONFIG_H
+/* VMEConfig.h, S. Kate Feng modified it for MVME5500 3/04  */
+/* BSP specific address space configuration parameters */
+
+/* 
+ * The BSP maps VME address ranges into
+ * one BAT.
+ * NOTE: the BSP (startup/bspstart.c) uses
+ * hardcoded window lengths that match this
+ * layout:
+ */
+#define _VME_A32_WIN0_ON_PCI	        0x90000000
+#define _VME_A24_ON_PCI			0x9f000000
+#define _VME_A16_ON_PCI			0x9fff0000
+
+/* start of the A32 window on the VME bus
+ * TODO: this should perhaps be a configuration option
+ */
+#define _VME_A32_WIN0_ON_VME	0x20000000
+
+/* if _VME_DRAM_OFFSET is defined, the BSP
+ * will map our RAM onto the VME bus, starting
+ * at _VME_DRAM_OFFSET
+ */
+#define _VME_DRAM_OFFSET		0x90000000
+
+#endif
Index: c/src/lib/libbsp/powerpc/mvme5500/vme/vmeconfig.c
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/vme/vmeconfig.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/vme/vmeconfig.c	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,85 @@
+/* vmeconfig.c,v 1.1.2.2 2003/03/25 16:46:01 joel Exp */
+
+/* Standard VME bridge configuration for PPC boards */
+
+/* Copyright Author: Till Straumann <strauman@slac.stanford.edu>, 3/2002 */
+
+/* Copyright 2004, Brookhaven National Lab. and S. Kate Feng <feng1@bnl.gov> 
+ * Modified to support the MVME5500, 3/2004
+ */
+
+#include <bsp.h>
+#include <bsp/VME.h>
+#include <bsp/irq.h>
+#include <libcpu/bat.h>
+
+/* Use a weak alias for the VME configuration.
+ * This permits individual applications to override
+ * this routine.
+ * They may even create an 'empty'
+ *
+ *    void BSP_vme_config(void) {}
+ *
+ * which will avoid linking in the Universe driver
+ * at all :-).
+ */
+
+void BSP_vme_config(void) __attribute__ (( weak, alias("__BSP_default_vme_config") ));
+
+void
+__BSP_default_vme_config(void)
+{
+
+  vmeUniverseInit();
+  vmeUniverseReset();
+
+  /* setup a PCI0 area to map the VME bus */
+  setdbat(0,_VME_A32_WIN0_ON_PCI, _VME_A32_WIN0_ON_PCI, 0x10000000, IO_PAGE);
+
+  /* map VME address ranges */
+  vmeUniverseMasterPortCfg(
+	0,
+	VME_AM_EXT_SUP_DATA,
+	_VME_A32_WIN0_ON_VME,
+	_VME_A32_WIN0_ON_PCI,
+	0x0F000000);
+  vmeUniverseMasterPortCfg(
+	1,
+	VME_AM_STD_SUP_DATA,
+	0x00000000,
+	_VME_A24_ON_PCI,
+	0x00ff0000);
+  vmeUniverseMasterPortCfg(
+	2,
+	VME_AM_SUP_SHORT_IO,
+	0x00000000,
+	_VME_A16_ON_PCI,
+	0x00010000);
+
+#ifdef _VME_DRAM_OFFSET
+  /* map our memory to VME */
+  vmeUniverseSlavePortCfg(
+	0,
+	VME_AM_EXT_SUP_DATA,
+	_VME_DRAM_OFFSET,
+	PCI_DRAM_OFFSET,
+	BSP_mem_size);
+
+  /* make sure the host bridge PCI master is enabled */
+  vmeUniverseWriteReg(
+	vmeUniverseReadReg(UNIV_REGOFF_PCI_CSR) | UNIV_PCI_CSR_BM,
+	UNIV_REGOFF_PCI_CSR);
+#endif
+
+  /* stdio is not yet initialized; the driver will revert to printk */
+  vmeUniverseMasterPortsShow(0);
+  vmeUniverseSlavePortsShow(0);
+
+  /* install the VME insterrupt manager */
+  vmeUniverseInstallIrqMgr(0,12,1,13);    
+  if (vmeUniverse0PciIrqLine<0)
+	BSP_panic("Unable to get interrupt line info from PCI config");
+  _BSP_vme_bridge_irq= BSP_GPP_IRQ_LOWEST_OFFSET+vmeUniverse0PciIrqLine;
+  /* install alternate resetter  TODO 
+  __BSP_alternate_reset = vmeUniverseResetBus;*/
+}
Index: c/src/lib/libbsp/powerpc/mvme5500/wrapup/Makefile.am
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/wrapup/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/wrapup/Makefile.am	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,27 @@
+##
+## Makefile.am,v 1.12.2.1 2003/02/20 21:57:21 joel Exp
+##
+
+BSP_PIECES = clock console irq pci startup tod vectors GT64260 network vme
+
+# bummer; have to use $foreach since % pattern subst rules only replace 1x
+OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.$(OBJEXT)) \
+    $(wildcard ../../../../libcpu/$(RTEMS_CPU)/shared/*/$(ARCH)/*.$(OBJEXT)) \
+    $(wildcard ../../../../libcpu/$(RTEMS_CPU)/mpc6xx/*/$(ARCH)/*.$(OBJEXT)) \
+    ../@exceptions@/$(ARCH)/rtems-cpu.rel \
+    $(wildcard ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/*/$(ARCH)/*.$(OBJEXT))
+LIB = $(ARCH)/libbsp.a
+
+include $(top_srcdir)/../../../../../../automake/compile.am
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(LIB): $(OBJS)
+	$(make-library)
+
+all-local: $(ARCH) $(LIB)
+
+include $(top_srcdir)/../../../../../../automake/local.am
Index: c/src/lib/libbsp/powerpc/mvme5500/wrapup/Makefile.in
===================================================================
--- c/src/lib/libbsp/powerpc/mvme5500/wrapup/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
+++ c/src/lib/libbsp/powerpc/mvme5500/wrapup/Makefile.in	(revision 7be6ad9701934100d2929abbcce770da1e0a005f)
@@ -0,0 +1,509 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+
+AR = @AR@
+
+# OBSOLETE: Don't use
+AS = $(CC)
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BARE_CPU_CFLAGS = @BARE_CPU_CFLAGS@
+BARE_CPU_MODEL = @BARE_CPU_MODEL@
+
+CC = @CC@ $(GCCSPECS)
+
+CCAS = $(CC)
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @RTEMS_CFLAGS@ $(XCFLAGS)
+CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
+CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
+CFLAGS_PROFILE_V = @CFLAGS_PROFILE_V@
+CPP = @CPP@ $(GCCSPECS)
+
+CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
+
+CPU_CFLAGS = @CPU_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENDIF = @ENDIF@
+EXEEXT = @EXEEXT@
+GCC_SPECS = @GCC_SPECS@
+HAS_MP = @HAS_MP@
+HAS_NETWORKING = @HAS_NETWORKING@
+HAS_NETWORKING_FALSE = @HAS_NETWORKING_FALSE@
+HAS_NETWORKING_TRUE = @HAS_NETWORKING_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MULTILIB_FALSE = @MULTILIB_FALSE@
+MULTILIB_TRUE = @MULTILIB_TRUE@
+NM = @NM@
+OBJCOPY = @OBJCOPY@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKHEX = @PACKHEX@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PROJECT_INCLUDE = @PROJECT_INCLUDE@
+PROJECT_RELEASE = @PROJECT_RELEASE@
+PROJECT_ROOT = @PROJECT_ROOT@
+PROJECT_TOPdir = @PROJECT_TOPdir@
+RANLIB = @RANLIB@
+RTEMS_BSP = @RTEMS_BSP@
+RTEMS_BSP_FAMILY = @RTEMS_BSP_FAMILY@
+RTEMS_BSP_SPECS = @RTEMS_BSP_SPECS@
+RTEMS_CFLAGS = @RTEMS_CFLAGS@
+RTEMS_CPPFLAGS = @RTEMS_CPPFLAGS@
+RTEMS_CPU = @RTEMS_CPU@
+RTEMS_CPU_MODEL = @RTEMS_CPU_MODEL@
+RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
+RTEMS_HOST = @RTEMS_HOST@
+RTEMS_ROOT = @RTEMS_ROOT@
+RTEMS_TOPdir = @RTEMS_TOPdir@
+RTEMS_USE_GCC_FALSE = @RTEMS_USE_GCC_FALSE@
+RTEMS_USE_GCC_TRUE = @RTEMS_USE_GCC_TRUE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE = @SIZE@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+bsplibdir = @bsplibdir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exceptions = @exceptions@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+
+BSP_PIECES = clock console irq pci startup vectors GT64260 network vme
+
+# bummer; have to use $foreach since % pattern subst rules only replace 1x
+OBJS = $(foreach piece, $(BSP_PIECES), ../$(piece)/$(ARCH)/*.$(OBJEXT)) \
+    $(wildcard ../../../../libcpu/$(RTEMS_CPU)/shared/*/$(ARCH)/*.$(OBJEXT)) \
+    $(wildcard ../../../../libcpu/$(RTEMS_CPU)/mpc6xx/*/$(ARCH)/*.$(OBJEXT)) \
+    ../@exceptions@/$(ARCH)/rtems-cpu.rel \
+    $(wildcard ../../../../libcpu/$(RTEMS_CPU)/$(RTEMS_CPU_MODEL)/*/$(ARCH)/*.$(OBJEXT))
+
+LIB = $(ARCH)/libbsp.a
+
+@RTEMS_USE_GCC_TRUE@GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
+# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
+CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
+ASFLAGS = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
+
+LINK_LIBS = $(LD_LIBS)
+
+
+#
+# Client compiler and support tools
+#
+
+#
+# How to compile stuff into ${ARCH} subdirectory
+#
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+        $(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
+
+
+# Dependency files for use by gmake
+# NOTE: we don't put them into $(ARCH)
+#       so that 'make clean' doesn't blow it away
+DEPEND = Depends-${ARCH}
+
+
+# spell out all the LINK_FILE's, rather than using -lbsp, so
+#  that $(LINK_FILES) can be a dependency
+LINK_OBJS = \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+LINK_FILES = \
+    $(START_FILE) \
+    $(OBJS) \
+    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
+
+
+VARIANT = OPTIMIZE
+
+VARIANT_OPTIMIZE_V = OPTIMIZE
+VARIANT_DEBUG_V = DEBUG
+VARIANT_PROFILE_V = PROFILE
+VARIANT_optimize_V = OPTIMIZE
+VARIANT_debug_V = DEBUG
+VARIANT_profile_V = PROFILE
+
+VARIANT_V = $(VARIANT_$(VARIANT)_V)
+
+ARCH_OPTIMIZE_V = o-optimize
+ARCH_DEBUG_V = o-debug
+ARCH_PROFILE_V = o-profile
+
+ARCH__V = $(ARCH_OPTIMIZE_V)
+ARCH = $(ARCH_$(VARIANT_V)_V)
+
+LIBSUFFIX_OPTIMIZE_V = 
+LIBSUFFIX_DEBUG_V = _g
+LIBSUFFIX_PROFILE_V = _p
+LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
+
+LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
+CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
+
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_OPTIMIZE_V = 
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
+@RTEMS_USE_GCC_TRUE@RTEMS_CFLAGS_PROFILE_V = -pg
+
+RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
+CXX = @CXX@ $(GCCSPECS)
+
+AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
+AM_CFLAGS = 
+AM_CXXFLAGS = 
+AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
+
+ARFLAGS = ruv
+
+TMPINSTALL_FILES = $(PROJECT_RELEASE)/lib
+
+PROJECT_TOOLS = $(PROJECT_RELEASE)/build-tools
+subdir = wrapup
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/bspopts.tmp
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DIST_COMMON = $(top_srcdir)/../../../../../../automake/compile.am \
+	$(top_srcdir)/../../../../../../automake/lib.am \
+	$(top_srcdir)/../../../../../../automake/local.am Makefile.am \
+	Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/../../../../../../automake/compile.am $(top_srcdir)/../../../../../../automake/lib.am $(top_srcdir)/../../../../../../automake/local.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  wrapup/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	$(mkinstalldirs) $(distdir)/../../../../../../../automake
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile all-local
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+	clean-local distclean distclean-generic distdir dvi dvi-am info \
+	info-am install install-am install-data install-data-am \
+	install-exec install-exec-am install-info install-info-am \
+	install-man install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+	uninstall-am uninstall-info-am
+
+@RTEMS_USE_GCC_FALSE@include $(CONFIG.CC)
+
+${ARCH}/%.o: %.c
+	${COMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.cc
+	${CXXCOMPILE} -o $@ -c $<
+
+${ARCH}/%.o: %.S
+	${CCASCOMPILE} -DASM -o $@ -c $<
+
+# We deliberately don't have anything depend on the
+# $(DEPEND) file; otherwise it will get rebuilt even
+# on 'make clean'
+#
+
+@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
+@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
+@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
+@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
+@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)
+
+# pull in dependencies if they exist  
+@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
+@RTEMS_USE_GCC_TRUE@include ${DEPEND}
+@RTEMS_USE_GCC_TRUE@@ENDIF@
+depend: depend-am
+
+@RTEMS_USE_GCC_TRUE@define make-rel
+@RTEMS_USE_GCC_TRUE@	$(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
+@RTEMS_USE_GCC_TRUE@endef
+@RTEMS_USE_GCC_FALSE@define make-rel
+@RTEMS_USE_GCC_FALSE@	$(LINK) $(XLDFLAGS) $^
+@RTEMS_USE_GCC_FALSE@endef
+
+${ARCH}:
+	mkdir ${ARCH}
+
+clean-local:
+	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
+	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
+
+define make-library
+test -d $(ARCH) || mkdir $(ARCH)
+$(RM) $@
+$(AR) $(ARFLAGS) $@ $^
+$(RANLIB) $@
+endef
+
+$(PROJECT_RELEASE)/lib:
+	@$(mkinstalldirs) $@
+
+.PRECIOUS: $(LIB)
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(LIB): $(OBJS)
+	$(make-library)
+
+all-local: $(ARCH) $(LIB)
+
+debug:
+	@echo
+	@echo "\"make debug\" is obsolete, instead use:"
+	@echo "	make VARIANT=DEBUG"
+	@echo
+
+.PHONY: debug
+
+profile:
+	@echo
+	@echo "\"make profile\" is obsolete, instead use:"
+	@echo "	make VARIANT=PROFILE"
+	@echo
+
+.PHONY: profile
+
+preinstall-am: $(PREINSTALL_FILES)
+preinstall: preinstall-am
+.PHONY: preinstall preinstall-am
+
+depend-am: depend-gcc
+depend: depend-am
+.PHONY: depend depend-am depend-gcc
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
