Index: c/src/lib/libbsp/mips/hurricane/.cvsignore
===================================================================
--- c/src/lib/libbsp/mips/hurricane/.cvsignore	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/.cvsignore	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,14 @@
+aclocal.m4
+autom4te*.cache
+config.cache
+config.guess
+config.log
+config.status
+config.sub
+configure
+depcomp
+install-sh
+Makefile
+Makefile.in
+missing
+mkinstalldirs
Index: c/src/lib/libbsp/mips/hurricane/ChangeLog
===================================================================
--- c/src/lib/libbsp/mips/hurricane/ChangeLog	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/ChangeLog	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,13 @@
+2006-03-16	Ralf CorsÃ©pius <ralf.corsepius@rtems.org>
+
+	* liblnk/pmon.S, liblnk/regs.S, liblnk/lnklib.S, README,
+	bsp_specs, configure.ac, startup/inittlb.c, startup/bspstart.c,
+	startup/setvec.c, startup/ghlinkcmds, startup/idtmem.S, 
+	startup/exception.S, startup/bspclean.c, startup/idttlb.S,
+	startup/linkcmds, include/usc.h, include/tm27.h, include/bsp.h,
+	include/coverhd.h, clock/clock.h, clock/clock.S, clock/ckinit.c,
+	Makefile.am, start/start.S, console/console.c, times: 
+	New (Submission by Bruce Robinson <brucer@pmccorp.com>). 
+
+	* The HURRICANE BSP is for a Quick Logic Hurricane evaluation board.
+	  This board has a PMC-Sierra RM5230 or RM5231 MIPS Processor.
Index: c/src/lib/libbsp/mips/hurricane/Makefile.am
===================================================================
--- c/src/lib/libbsp/mips/hurricane/Makefile.am	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/Makefile.am	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,116 @@
+##
+## $Id$
+##
+
+ACLOCAL_AMFLAGS = -I ../../../../aclocal
+
+include $(top_srcdir)/../../../../automake/compile.am
+include $(top_srcdir)/../../bsp.am
+
+dist_project_lib_DATA = bsp_specs
+
+include_HEADERS = include/bsp.h
+include_HEADERS += include/tm27.h
+include_HEADERS += include/usc.h
+
+nodist_include_HEADERS = include/bspopts.h
+DISTCLEANFILES = include/bspopts.h
+
+noinst_PROGRAMS =
+
+nodist_include_HEADERS += ../../shared/include/coverhd.h
+
+EXTRA_DIST = start/start.S start/regs.S
+start.$(OBJEXT): start/start.S
+	$(CPPASCOMPILE) -DASM -o $@ -c $<
+
+project_lib_DATA = start.$(OBJEXT)
+
+dist_project_lib_DATA += startup/linkcmds
+
+noinst_PROGRAMS += startup.rel
+startup_rel_SOURCES = ../../shared/bspclean.c \
+    ../../shared/bsplibc.c ../../shared/bsppost.c startup/bspstart.c \
+    ../../shared/bootcard.c ../../shared/main.c ../../shared/sbrk.c \
+    ../../shared/gnatinstallhandler.c ../../shared/setvec.c \
+    startup/inittlb.c \
+    startup/idtmem.S startup/idttlb.S startup/exception.S
+startup_rel_CPPFLAGS = $(AM_CPPFLAGS)
+startup_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += clock.rel
+clock_rel_SOURCES = clock/ckinit.c
+clock_rel_CPPFLAGS = $(AM_CPPFLAGS)
+clock_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += console.rel
+console_rel_SOURCES = console/console.c
+console_rel_CPPFLAGS = $(AM_CPPFLAGS)
+console_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_PROGRAMS += liblnk.rel
+liblnk_rel_SOURCES = liblnk/lnklib.S liblnk/pmon.S
+liblnk_rel_CPPFLAGS = $(AM_CPPFLAGS)
+liblnk_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
+
+noinst_LIBRARIES = libbsp.a
+libbsp_a_SOURCES =
+libbsp_a_LIBADD = startup.rel clock.rel console.rel liblnk.rel
+libbsp_a_LIBADD += ../../../libcpu/@RTEMS_CPU@/shared/cache.rel \
+    ../../../libcpu/@RTEMS_CPU@/shared/interrupts.rel \
+    ../../../libcpu/@RTEMS_CPU@/rm52xx/timer.rel \
+    ../../../libcpu/@RTEMS_CPU@/rm52xx/vectorisrs.rel
+
+all-local: $(PREINSTALL_FILES) $(TMPINSTALL_FILES)
+
+PREINSTALL_DIRS =
+PREINSTALL_FILES =
+TMPINSTALL_FILES =
+
+$(PROJECT_INCLUDE)/$(dirstamp):
+	@$(mkdir_p) $(PROJECT_INCLUDE)
+	@: > $(PROJECT_INCLUDE)/$(dirstamp)
+PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
+
+$(PROJECT_LIB)/$(dirstamp):
+	@$(mkdir_p) $(PROJECT_LIB)
+	@: > $(PROJECT_LIB)/$(dirstamp)
+PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
+
+$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
+PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
+
+$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
+
+$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
+
+$(PROJECT_INCLUDE)/usc.h: include/usc.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/usc.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/usc.h
+
+$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
+
+$(PROJECT_INCLUDE)/coverhd.h: ../../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
+PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
+
+$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
+TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
+
+$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
+	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
+PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
+
+CLEANFILES = $(PREINSTALL_FILES)
+DISTCLEANFILES += $(PREINSTALL_DIRS)
+CLEANFILES += $(TMPINSTALL_FILES)
+
+include $(top_srcdir)/../../../../automake/local.am
Index: c/src/lib/libbsp/mips/hurricane/README
===================================================================
--- c/src/lib/libbsp/mips/hurricane/README	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/README	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,46 @@
+#
+#  README,v 1.2 1998/01/16 16:56:31 joel Exp
+#
+# @(#)README        08/20/96     1.2
+#
+
+BSP NAME:           hurricane
+BOARD:              Quick Logic Hurricane SBC with V320USC
+BUS:                N/A
+CPU FAMILY:         mips
+CPU:                PMC-Sierra RM5231 
+COPROCESSORS:       N/A
+MODE:               32 bit mode
+
+DEBUG MONITOR:      PMON
+
+PERIPHERALS
+===========
+TIMERS:             V320USC internal
+SERIAL PORTS:       PMON controlled
+REAL-TIME CLOCK:    none
+DMA:                none
+VIDEO:              none
+SCSI:               none
+NETWORKING:         none
+
+DRIVER INFORMATION
+==================
+CLOCK DRIVER:       V320USC internal
+IOSUPP DRIVER:      N/A
+SHMSUPP:            N/A 
+TIMER DRIVER:       V320USC internal
+TTY DRIVER:         uses PMON
+
+STDIO
+=====
+PORT:               Console port 0
+ELECTRICAL:         RS-232
+BAUD:               9600
+BITS PER CHARACTER: 8
+PARITY:             None
+STOP BITS:          1
+
+NOTES
+=====
+
Index: c/src/lib/libbsp/mips/hurricane/bsp_specs
===================================================================
--- c/src/lib/libbsp/mips/hurricane/bsp_specs	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/bsp_specs	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,22 @@
+%rename lib old_lib
+%rename endfile old_endfile
+%rename startfile old_startfile
+%rename link old_link
+
+*lib:
+%{!qrtems: %(old_lib)} %{!nostdlib: %{qrtems: --start-group \
+%{!qrtems_debug: -lrtemsbsp -lrtemscpu} %{qrtems_debug: -lrtemsbsp_g -lrtemscpu_g} \
+-lc -lgcc --end-group \
+%{!qnolinkcmds: -T linkcmds%s}}}
+
+*startfile:
+%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems: \
+%{!qrtems_debug: start.o%s} \
+%{qrtems_debug: start_g.o%s} crti.o%s crtbegin.o%s }}
+
+*link:
+%{!qrtems: %(old_link)} %{qrtems: --oformat=elf32-littlemips -dc -dp -N -e start}
+
+*endfile:
+%{!qrtems: %(old_endfile)} %{qrtems: crtend.o%s crtn.o%s }
+
Index: c/src/lib/libbsp/mips/hurricane/clock/ckinit.c
===================================================================
--- c/src/lib/libbsp/mips/hurricane/clock/ckinit.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/clock/ckinit.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,262 @@
+
+/*  ckinit.c
+ *
+ *  This file contains the clock driver initialization for the Hurricane BSP.
+ *
+ *  Author:     Craig Lebakken <craigl@transition.com>
+ *
+ *  COPYRIGHT (c) 1996 by Transition Networks Inc.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of Transition Networks not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      Transition Networks makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  Derived from c/src/lib/libbsp/no_cpu/no_bsp/clock/ckinit.c:
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  $Id$
+ */
+
+/*
+ *  Rather than deleting this, it is commented out to (hopefully) help
+ *  the submitter send updates.
+ *
+ *  static char _sccsid[] = "@(#)ckinit.c 08/20/96     1.3\n";
+ */
+
+
+#include <stdlib.h>
+
+#include <rtems.h>
+#include <rtems/libio.h>
+
+#define EXT_INT1    0x800  /* external interrupt 5 */
+
+#include "clock.h"
+
+/* formerly in the BSP */
+#if 0
+#define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) /* equivalent to CPU clock speed in MHz */
+#endif
+
+#define CLOCKS_PER_MICROSECOND \
+  rtems_cpu_configuration_get_clicks_per_microsecond()
+/* to avoid including the bsp */
+mips_isr_entry set_vector( rtems_isr_entry, rtems_vector_number, int );
+
+void USC_isr( void );
+void reset_wdt(void);
+void enable_wdi(void);
+void init_hbt(void);
+void enable_hbi(void);
+void disable_hbi(void);
+
+void Clock_exit( void );
+rtems_isr Clock_isr( rtems_vector_number vector );
+
+
+/*
+ *  The interrupt vector number associated with the clock tick device
+ *  driver.
+ */
+
+#define CLOCK_VECTOR_MASK    EXT_INT1
+#define CLOCK_VECTOR         MIPS_INTERRUPT_BASE + 0x3
+
+/*
+ *  Clock_driver_ticks is a monotonically increasing counter of the
+ *  number of clock ticks since the driver was initialized.
+ */
+
+volatile uint32_t Clock_driver_ticks;
+
+/*
+ *  Clock_isrs is the number of clock ISRs until the next invocation of
+ *  the RTEMS clock tick routine.  The clock tick device driver
+ *  gets an interrupt once a millisecond and counts down until the
+ *  length of time between the user configured microseconds per tick
+ *  has passed.
+ */
+
+uint32_t Clock_isrs;              /* ISRs until next tick */
+
+/*
+ * These are set by clock driver during its init
+ */
+ 
+rtems_device_major_number rtems_clock_major = ~0;
+rtems_device_minor_number rtems_clock_minor;
+
+/*
+ *  The previous ISR on this clock tick interrupt vector.
+ */
+
+rtems_isr_entry  Old_ticker;
+
+void Clock_exit( void );
+
+static uint32_t mips_timer_rate = 0;
+
+/*
+ *  Isr Handler
+ */
+
+rtems_isr Clock_isr(
+  rtems_vector_number vector
+)
+{
+/*
+ * bump the number of clock driver ticks since initialization
+ *
+ * determine if it is time to announce the passing of tick as configured
+ * to RTEMS through the rtems_clock_tick directive
+ *
+ * perform any timer dependent tasks
+ */
+
+  reset_wdt();		/* Reset hardware watchdog timer */
+
+  Clock_driver_ticks += 1;
+
+  rtems_clock_tick();
+}
+
+/* User callback shell (set from Clock_Control) */
+static void (*user_callback)(void);
+
+rtems_isr User_Clock_isr(
+  rtems_vector_number vector
+)
+{
+   if (user_callback)
+      user_callback();
+}
+
+/*
+ *  Install_clock
+ *
+ *  Install a clock tick handleR and reprograms the chip.  This
+ *  is used to initially establish the clock tick.
+ */
+
+void Install_clock(
+  rtems_isr_entry clock_isr
+)
+{
+	/*
+	*  Initialize the clock tick device driver variables
+	*/
+
+	Clock_driver_ticks = 0;
+	Clock_isrs = rtems_configuration_get_milliseconds_per_tick();
+
+	mips_timer_rate =
+		rtems_configuration_get_microseconds_per_tick() * CLOCKS_PER_MICROSECOND;
+
+	/*
+	*  Hardware specific initialize goes here
+	*/
+	
+	/* Set up USC heartbeat timer to generate interrupts */
+	disable_hbi();			/* Disable heartbeat interrupt in USC */
+	
+							/* Install interrupt handler */
+	Old_ticker = (rtems_isr_entry) set_vector( USC_isr, CLOCK_VECTOR, 1 );
+	
+	init_hbt();				/* Initialize heartbeat timer */
+	
+	reset_wdt();			/* Reset watchdog timer */
+	
+	enable_wdi();			/* Enable watchdog interrupt in USC */
+	
+	enable_hbi();			/* Enable heartbeat interrupt in USC */
+	
+							/* Enable USC interrupt in MIPS processor */
+	mips_enable_in_interrupt_mask(CLOCK_VECTOR_MASK);
+	
+	/*
+	*  Schedule the clock cleanup routine to execute if the application exits.
+	*/
+
+	atexit( Clock_exit );
+}
+
+/*
+ *  Clean up before the application exits
+ */
+
+void Clock_exit( void )
+{
+  /* mips: turn off the timer interrupts */
+  mips_disable_in_interrupt_mask(~CLOCK_VECTOR_MASK);
+}
+
+/*
+ *  Clock_initialize
+ *
+ *  Device driver entry point for clock tick driver initialization.
+ */
+
+rtems_device_driver Clock_initialize(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void *pargp
+)
+{
+  Install_clock( Clock_isr );
+ 
+  /*
+   * make major/minor avail to others such as shared memory driver
+   */
+ 
+  rtems_clock_major = major;
+  rtems_clock_minor = minor;
+ 
+  return RTEMS_SUCCESSFUL;
+}
+
+rtems_device_driver Clock_control(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void *pargp
+)
+{
+    uint32_t isrlevel;
+    rtems_libio_ioctl_args_t *args = pargp;
+ 
+    if (args == 0)
+        goto done;
+ 
+    /*
+     * This is hokey, but until we get a defined interface
+     * to do this, it will just be this simple...
+     */
+ 
+    if (args->command == rtems_build_name('I', 'S', 'R', ' '))
+    {
+        Clock_isr(CLOCK_VECTOR);
+    }
+    else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
+    {
+      rtems_interrupt_disable( isrlevel );
+      user_callback = (void (*)(void))args->buffer;
+      (void) set_vector( User_Clock_isr, CLOCK_VECTOR, 1 );
+      rtems_interrupt_enable( isrlevel );
+    }
+ 
+done:
+    return RTEMS_SUCCESSFUL;
+}
Index: c/src/lib/libbsp/mips/hurricane/clock/clock.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/clock/clock.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/clock/clock.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,45 @@
+/*  clock.s 
+ *
+ *  This file contains the assembly code for the Hurricane BSP clock driver.
+ *
+ *  Author:     Craig Lebakken <craigl@transition.com>
+ *
+ *  COPYRIGHT (c) 1996 by Transition Networks Inc.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of Transition Networks not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      Transition Networks makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  clock.S,v 1.5 2001/05/24 13:23:48 joel Exp
+ */
+/* @(#)clock.S       08/20/96     1.2 */
+
+#include <iregdef.h>
+#include <idtcpu.h>
+#include <asm.h>
+
+FRAME(mips_set_timer,sp,0,ra)
+	.set noreorder
+        mfc0 t0,C0_COUNT
+        nop
+        addu t0,a0,t0
+        mtc0 t0,C0_COMPARE
+        j ra
+	nop
+	.set reorder
+ENDFRAME(mips_set_timer)
+
+FRAME(mips_get_timer,sp,0,ra)
+	.set noreorder
+        mfc0 v0,C0_COUNT
+        j ra
+	nop
+	.set reorder
+ENDFRAME(mips_get_timer)
Index: c/src/lib/libbsp/mips/hurricane/clock/clock.h
===================================================================
--- c/src/lib/libbsp/mips/hurricane/clock/clock.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/clock/clock.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,25 @@
+/*  clock.s
+ *
+ *  This file contains the assembly code for the Hurricane BSP clock driver.
+ *
+ *  Author:     Craig Lebakken <craigl@transition.com>
+ *
+ *  COPYRIGHT (c) 1996 by Transition Networks Inc.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of Transition Networks not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      Transition Networks makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  clock.h,v 1.2 1996/09/11 19:14:52 joel Exp
+ */
+
+/* @(#)clock.h       08/20/96     1.2 */
+
+extern void mips_set_timer( uint32_t timer_clock_interval );
Index: c/src/lib/libbsp/mips/hurricane/configure.ac
===================================================================
--- c/src/lib/libbsp/mips/hurricane/configure.ac	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/configure.ac	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,21 @@
+## Process this file with autoconf to produce a configure script.
+## 
+## configure.ac,v 1.5.2.2 2003/08/11 14:37:57 ralf Exp
+
+AC_PREREQ(2.59)
+AC_INIT([rtems-c-src-lib-libbsp-mips-hurricane],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
+AC_CONFIG_SRCDIR([bsp_specs])
+RTEMS_TOP(../../../../../..)
+
+RTEMS_CANONICAL_TARGET_CPU
+AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
+
+RTEMS_BSP_CONFIGURE
+
+RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
+RTEMS_CANONICALIZE_TOOLS
+RTEMS_PROG_CCAS
+
+# Explicitly list all Makefiles here
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
Index: c/src/lib/libbsp/mips/hurricane/console/console.c
===================================================================
--- c/src/lib/libbsp/mips/hurricane/console/console.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/console/console.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,270 @@
+/*
+ *  This file contains the IDT 4650 console IO package.
+ *
+ *  Author:     Craig Lebakken <craigl@transition.com>
+ *
+ *  COPYRIGHT (c) 1996 by Transition Networks Inc.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of Transition Networks not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      Transition Networks makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  Derived from c/src/lib/libbsp/no_cpu/no_bsp/console/console.c:
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  console.c,v 1.10.4.1 2003/09/04 18:44:52 joel Exp
+ */
+
+
+/*
+ *  Rather than deleting this, it is commented out to (hopefully) help
+ *  the submitter send updates.
+ *
+ *  static char _sccsid[] = "@(#)console.c 08/20/96     1.6\n";
+ */
+
+
+
+#include <bsp.h>
+#include <rtems/libio.h>
+#include <ctype.h>
+
+/* PMON entry points */
+int mon_read(int fd, char *buf, int cnt);		/* stdin is fd=0 */
+int mon_write(int fd, char *buf, int cnt);		/* stdout is fd=1 */
+
+/*  console_initialize
+ *
+ *  This routine initializes the console IO driver.
+ *
+ *  Input parameters: NONE
+ *
+ *  Output parameters:  NONE
+ *
+ *  Return values:
+ */
+
+rtems_device_driver console_initialize(
+  rtems_device_major_number  major,
+  rtems_device_minor_number  minor,
+  void                      *arg
+)
+{
+  rtems_status_code status;
+ 
+  status = rtems_io_register_name(
+    "/dev/console",
+    major,
+    (rtems_device_minor_number) 0
+  );
+ 
+  if (status != RTEMS_SUCCESSFUL)
+    rtems_fatal_error_occurred(status);
+ 
+  return RTEMS_SUCCESSFUL;
+}
+
+
+/*  is_character_ready
+ *
+ *  This routine returns TRUE if a character is available.
+ *
+ *  Input parameters: NONE
+ *
+ *  Output parameters:  NONE
+ *
+ *  Return values:
+ */
+
+rtems_boolean is_character_ready(
+  char *ch
+)
+{
+  *ch = '\0';   /* return NULL for no particular reason */
+  return(TRUE);
+}
+
+/*  inbyte
+ *
+ *  This routine reads a character from the SOURCE.
+ *
+ *  Input parameters: NONE
+ *
+ *  Output parameters:  NONE
+ *
+ *  Return values:
+ *    character read from SOURCE
+ */
+
+char inbyte( void )
+{
+	char buf[10];
+  /*
+   *  If polling, wait until a character is available.
+   */
+
+	mon_read(0, buf, 1);		/* stdin is fd=0, read 1 byte */
+
+	return (buf[0]);
+}
+
+/*  outbyte
+ *
+ *  This routine transmits a character out the SOURCE.  It may support
+ *  XON/XOFF flow control.
+ *
+ *  Input parameters:
+ *    ch  - character to be transmitted
+ *
+ *  Output parameters:  NONE
+ */
+
+void outbyte(
+  char ch
+)
+{
+	char buf[10];
+  /*
+   *  If polling, wait for the transmitter to be ready.
+   *  Check for flow control requests and process.
+   *  Then output the character.
+   */
+	buf[0] = ch;
+
+	mon_write( 1, buf, 1 );		/* stdout is fd=1, write 1 byte */
+}
+
+
+#if 0
+static int console_fd = -1;
+#endif
+
+/*
+ *  Open entry point
+ */
+
+rtems_device_driver console_open(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+#if 0
+  int console_fd = open("tty0", 2); /* open for read/write */
+#endif
+  return RTEMS_SUCCESSFUL;
+}
+ 
+/*
+ *  Close entry point
+ */
+
+rtems_device_driver console_close(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+#if 0
+  if ( console_fd )
+    close( console_fd );
+#endif
+  return RTEMS_SUCCESSFUL;
+}
+
+/*
+ * read bytes from the serial port. We only have stdin.
+ */
+
+rtems_device_driver console_read(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+  rtems_libio_rw_args_t *rw_args;
+  char *buffer;
+  int maximum;
+  int count = 0;
+ 
+  rw_args = (rtems_libio_rw_args_t *) arg;
+
+  buffer = rw_args->buffer;
+  maximum = rw_args->count;
+
+  for (count = 0; count < maximum; count++) {
+    buffer[ count ] = inbyte();
+    if (buffer[ count ] == '\n' || buffer[ count ] == '\r') {
+      buffer[ count++ ]  = '\n';
+      break;
+    }
+  }
+
+  rw_args->bytes_moved = count;
+  return (count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED;
+}
+
+/*
+ * write bytes to the serial port. Stdout and stderr are the same. 
+ */
+
+rtems_device_driver console_write(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+  int count;
+  int maximum;
+  rtems_libio_rw_args_t *rw_args;
+  char *buffer;
+
+  rw_args = (rtems_libio_rw_args_t *) arg;
+
+  buffer = rw_args->buffer;
+  maximum = rw_args->count;
+
+  for (count = 0; count < maximum; count++) {
+    if ( buffer[ count ] == '\n') {
+      outbyte('\r');
+    }
+    outbyte( buffer[ count ] );
+  }
+
+  rw_args->bytes_moved = maximum;
+  return 0;
+}
+
+/*
+ *  IO Control entry point
+ */
+
+rtems_device_driver console_control(
+  rtems_device_major_number major,
+  rtems_device_minor_number minor,
+  void                    * arg
+)
+{
+  return RTEMS_SUCCESSFUL;
+}
+
+#include <rtems/bspIo.h>
+
+void hurricane_output_char(char c) { outbyte( c ); }
+
+BSP_output_char_function_type           BSP_output_char = hurricane_output_char;
+BSP_polling_getchar_function_type       BSP_poll_char = NULL;
+
Index: c/src/lib/libbsp/mips/hurricane/include/bsp.h
===================================================================
--- c/src/lib/libbsp/mips/hurricane/include/bsp.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/include/bsp.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,129 @@
+/*  bsp.h
+ *
+ *  This include file contains all board IO definitions.
+ *
+ *  XXX : put yours in here
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  bsp.h,v 1.12.4.1 2003/09/04 18:44:52 joel Exp
+ */
+/* @(#)bsp.h       03/15/96     1.1 */
+
+#ifndef __HURRICANE_BSP_h
+#define __HURRICANE_BSP_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <bspopts.h>
+
+#include <rtems.h>
+#include <rtems/iosupp.h>
+#include <rtems/console.h>
+#include <rtems/clockdrv.h>
+#include <libcpu/rm5231.h>
+
+/*
+ *  confdefs.h overrides for this BSP:
+ *   - number of termios serial ports (defaults to 1)
+ *   - Interrupt stack space is not minimum if defined.
+ */
+
+/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
+#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
+
+extern void WriteDisplay( char * string );
+
+/*
+ *  Define the time limits for RTEMS Test Suite test durations.
+ *  Long test and short test duration limits are provided.  These
+ *  values are in seconds and need to be converted to ticks for the
+ *  application.
+ *
+ */
+
+#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
+#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
+
+/*
+ *  Stuff for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 0
+
+#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )
+
+#define Cause_tm27_intr()
+
+#define Clear_tm27_intr()
+
+#define Lower_tm27_intr()
+
+extern uint32_t mips_get_timer( void );
+
+#define CPU_CLOCK_RATE_MHZ     (200)
+#define CLOCKS_PER_MICROSECOND ( CPU_CLOCK_RATE_MHZ ) /* equivalent to CPU clock speed in MHz */
+
+/*
+ *  Simple spin delay in microsecond units for device drivers.
+ *  This is very dependent on the clock speed of the target.
+ *
+ *  NOTE: This macro generates a warning like "integer constant out 
+ *        of range" which is safe to ignore.  In 64 bit mode, unsigned32
+ *        types are actually 64 bits long so that comparisons between
+ *        unsigned32 types and pointers are valid.  The warning is caused
+ *        by code in the delay macro that is necessary for 64 bit mode.
+ */
+
+#define rtems_bsp_delay( microseconds ) \
+  { \
+     unsigned32 _end_clock = \
+          mips_get_timer() + microseconds * CLOCKS_PER_MICROSECOND; \
+     _end_clock %= 0x100000000;  /* make sure result is 32 bits */ \
+     \
+     /* handle timer overflow, if necessary */ \
+     while ( _end_clock < mips_get_timer() );  \
+     \
+     while ( _end_clock > mips_get_timer() ); \
+  }
+
+/* Constants */
+
+#define RAM_START 0
+#define RAM_END   0x100000
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;
+
+/*
+ *  Device Driver Table Entries
+ */
+
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+ 
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+
+/* miscellaneous stuff assumed to exist */
+
+rtems_isr_entry set_vector(
+  rtems_isr_entry, rtems_vector_number, int );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif	/* __HURRICANE_BSP_h */
+
+/* end of include file */
Index: c/src/lib/libbsp/mips/hurricane/include/coverhd.h
===================================================================
--- c/src/lib/libbsp/mips/hurricane/include/coverhd.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/include/coverhd.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,115 @@
+/*  coverhd.h
+ *
+ *  This include file has defines to represent the overhead associated
+ *  with calling a particular directive from C.  These are used in the
+ *  Timing Test Suite to ignore the overhead required to pass arguments
+ *  to directives.  On some CPUs and/or target boards, this overhead
+ *  is significant and makes it difficult to distinguish internal
+ *  RTEMS execution time from that used to call the directive.
+ *  This file should be updated after running the C overhead timing
+ *  test.  Once this update has been performed, the RTEMS Time Test
+ *  Suite should be rebuilt to account for these overhead times in the
+ *  timing results.
+ *
+ *  NOTE:  If these are all zero, then the times reported include
+ *         all calling overhead including passing of arguments.
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  coverhd.h,v 1.7.6.1 2003/09/04 18:44:52 joel Exp
+ */
+/* @(#)coverhd.h       04/08/96     1.3 */
+
+#ifndef __COVERHD_h
+#define __COVERHD_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CALLING_OVERHEAD_INITIALIZE_EXECUTIVE      5
+#define CALLING_OVERHEAD_SHUTDOWN_EXECUTIVE        4
+#define CALLING_OVERHEAD_TASK_CREATE               6
+#define CALLING_OVERHEAD_TASK_IDENT                4
+#define CALLING_OVERHEAD_TASK_START                5
+#define CALLING_OVERHEAD_TASK_RESTART              4
+#define CALLING_OVERHEAD_TASK_DELETE               4
+#define CALLING_OVERHEAD_TASK_SUSPEND              4
+#define CALLING_OVERHEAD_TASK_RESUME               4
+#define CALLING_OVERHEAD_TASK_SET_PRIORITY         5
+#define CALLING_OVERHEAD_TASK_MODE                 4
+#define CALLING_OVERHEAD_TASK_GET_NOTE             5
+#define CALLING_OVERHEAD_TASK_SET_NOTE             5
+#define CALLING_OVERHEAD_TASK_WAKE_WHEN            9
+#define CALLING_OVERHEAD_TASK_WAKE_AFTER           4
+#define CALLING_OVERHEAD_INTERRUPT_CATCH           5
+#define CALLING_OVERHEAD_CLOCK_GET                 9
+#define CALLING_OVERHEAD_CLOCK_SET                 8
+#define CALLING_OVERHEAD_CLOCK_TICK                3
+
+#define CALLING_OVERHEAD_TIMER_CREATE              4
+#define CALLING_OVERHEAD_TIMER_IDENT               4
+#define CALLING_OVERHEAD_TIMER_DELETE              4
+#define CALLING_OVERHEAD_TIMER_FIRE_AFTER          6
+#define CALLING_OVERHEAD_TIMER_FIRE_WHEN           10
+#define CALLING_OVERHEAD_TIMER_RESET               4
+#define CALLING_OVERHEAD_TIMER_CANCEL              4
+#define CALLING_OVERHEAD_SEMAPHORE_CREATE          5
+#define CALLING_OVERHEAD_SEMAPHORE_IDENT           4
+#define CALLING_OVERHEAD_SEMAPHORE_DELETE          4
+#define CALLING_OVERHEAD_SEMAPHORE_OBTAIN          5
+#define CALLING_OVERHEAD_SEMAPHORE_RELEASE         4
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_CREATE      5
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_IDENT       4
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_DELETE      4
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_SEND        4
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_URGENT      4
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_BROADCAST   5
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_RECEIVE     5
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_FLUSH       4
+
+#define CALLING_OVERHEAD_EVENT_SEND                4
+#define CALLING_OVERHEAD_EVENT_RECEIVE             5
+#define CALLING_OVERHEAD_SIGNAL_CATCH              5
+#define CALLING_OVERHEAD_SIGNAL_SEND               4
+#define CALLING_OVERHEAD_PARTITION_CREATE          6
+#define CALLING_OVERHEAD_PARTITION_IDENT           4
+#define CALLING_OVERHEAD_PARTITION_DELETE          4
+#define CALLING_OVERHEAD_PARTITION_GET_BUFFER      4
+#define CALLING_OVERHEAD_PARTITION_RETURN_BUFFER   4
+#define CALLING_OVERHEAD_REGION_CREATE             6
+#define CALLING_OVERHEAD_REGION_IDENT              4
+#define CALLING_OVERHEAD_REGION_DELETE             4
+#define CALLING_OVERHEAD_REGION_GET_SEGMENT        5
+#define CALLING_OVERHEAD_REGION_RETURN_SEGMENT     4
+#define CALLING_OVERHEAD_PORT_CREATE               6
+#define CALLING_OVERHEAD_PORT_IDENT                4
+#define CALLING_OVERHEAD_PORT_DELETE               4
+#define CALLING_OVERHEAD_PORT_EXTERNAL_TO_INTERNAL 4
+#define CALLING_OVERHEAD_PORT_INTERNAL_TO_EXTERNAL 4
+
+#define CALLING_OVERHEAD_IO_INITIALIZE             5
+#define CALLING_OVERHEAD_IO_OPEN                   5
+#define CALLING_OVERHEAD_IO_CLOSE                  5
+#define CALLING_OVERHEAD_IO_READ                   5
+#define CALLING_OVERHEAD_IO_WRITE                  5
+#define CALLING_OVERHEAD_IO_CONTROL                5
+#define CALLING_OVERHEAD_FATAL_ERROR_OCCURRED      4
+#define CALLING_OVERHEAD_RATE_MONOTONIC_CREATE     4
+#define CALLING_OVERHEAD_RATE_MONOTONIC_IDENT      4
+#define CALLING_OVERHEAD_RATE_MONOTONIC_DELETE     4
+#define CALLING_OVERHEAD_RATE_MONOTONIC_CANCEL     4
+#define CALLING_OVERHEAD_RATE_MONOTONIC_PERIOD     4
+#define CALLING_OVERHEAD_MULTIPROCESSING_ANNOUNCE  3
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/* end of include file */
Index: c/src/lib/libbsp/mips/hurricane/include/tm27.h
===================================================================
--- c/src/lib/libbsp/mips/hurricane/include/tm27.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/include/tm27.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,32 @@
+/*
+ *  tm27.h
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+
+#ifndef _RTEMS_TMTEST27
+#error "This is an RTEMS internal file you must not include directly."
+#endif
+
+#ifndef __tm27_h
+#define __tm27_h
+
+/*
+ *  Define the interrupt mechanism for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 0
+
+#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )
+
+#define Cause_tm27_intr() /* empty */
+
+#define Clear_tm27_intr() /* empty */
+
+#define Lower_tm27_intr() /* empty */
+
+#endif
Index: c/src/lib/libbsp/mips/hurricane/include/usc.h
===================================================================
--- c/src/lib/libbsp/mips/hurricane/include/usc.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/include/usc.h	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,32 @@
+/* USC constants */
+
+#ifndef _USC_H__
+#define _USC_H__
+
+
+#define USC_REG_BASE	(0x1D000000 | 0xA0000000)
+
+/* Internal register addresses */
+#define SYSTEM (USC_REG_BASE + 0x73)
+
+#define INT_CFG0 (USC_REG_BASE + 0xE0)
+#define INT_CFG1 (USC_REG_BASE + 0xE4)
+#define INT_CFG2 (USC_REG_BASE + 0xE8)
+#define INT_STAT (USC_REG_BASE + 0xEC)
+
+#define WD_HBI (USC_REG_BASE + 0xF4)
+
+#define INT_CFG3 (USC_REG_BASE + 0x158)
+
+/* INT_CFGx register masks */
+#define HBI_MASK	0x00200000	/* Heartbeat timer interrupt mask */
+#define WDI_MASK	0x00400000	/* Watchdog timer interrupt mask */
+#define MODE_TOTEM_POLE	0x20000000	/* Totem Pole Output Mode */
+
+/* WD_HBI register bits */
+#define WD_EN 0x00800000	/* Watchdog enable */
+#define HBI_4000_PS	0x00200000	/* Heartbeat timer prescaler = 4000 */
+#define WD_INIT 0x10	/* Watchdog reset pattern (written to byte 2 in WD_HBI register) */
+
+
+#endif /* _USC_H__ */
Index: c/src/lib/libbsp/mips/hurricane/liblnk/lnklib.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/liblnk/lnklib.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/liblnk/lnklib.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,62 @@
+/*
+ *  lnklib.S,v 1.4 1999/03/31 23:21:19 joel Exp
+ */
+
+#include <rtems/mips/iregdef.h>
+#include <rtems/mips/idtcpu.h>
+
+#define FRAME(name,frm_reg,offset,ret_reg)      \
+        .globl  name;                           \
+        .ent    name;                           \
+name:;                                          \
+        .frame  frm_reg,offset,ret_reg
+
+#define ENDFRAME(name)                          \
+        .end name
+
+#define PROM_LINK(name,entry)           \
+        .globl  name;                   \
+        .ent    name;                   \
+name:   la      $2,+entry;              \
+        j       $2;                     \
+        .end name
+
+#define	PROM_ENTRY(x)	(0xbfc00000+((x)*8))
+
+#define PROM_RESET	PROM_ENTRY(0)
+#define PROM_NOT_IMP	PROM_ENTRY(1)
+#define PROM_RESTART	PROM_ENTRY(2)
+#define PROM_REINIT	PROM_ENTRY(3)
+#define	PROM_GETCHAR	PROM_ENTRY(11)
+#define	PROM_PUTCHAR	PROM_ENTRY(12)
+#define	PROM_SHOWCHAR	PROM_ENTRY(13)
+#define	PROM_PRINTF	PROM_ENTRY(16)
+#define	PROM_RETURN	PROM_ENTRY(17)
+
+#define	PROM_RGETS	PROM_ENTRY(25)
+#define PROM_FLUSHCACHE	PROM_ENTRY(28)
+#define PROM_CLEARCACHE	PROM_ENTRY(29)
+#define PROM_SETJMP	PROM_ENTRY(30)
+#define PROM_LONGJMP	PROM_ENTRY(31)
+
+	.text
+
+PROM_LINK(idtsim_putchar, PROM_PUTCHAR)
+PROM_LINK(idtsim_getchar, PROM_GETCHAR)
+PROM_LINK(idtsim_showchar, PROM_SHOWCHAR)
+PROM_LINK(idtsim__exit, PROM_RETURN)
+PROM_LINK(idtsim_reinit, PROM_REINIT)
+PROM_LINK(idtsim_restart, PROM_RESTART)
+PROM_LINK(idtsim_reset, PROM_RESET)
+PROM_LINK(idtsim_promexit, PROM_RETURN)
+PROM_LINK(idtsim_setjmp, PROM_SETJMP)
+PROM_LINK(idtsim_longjmp, PROM_LONGJMP)
+
+FRAME(idtsim_init_sbrk,sp,0,ra)
+	j	ra
+ENDFRAME(idtsim_init_sbrk)
+
+FRAME(idtsim_init_file,sp,0,ra)
+	j	ra
+ENDFRAME(idtsim_init_file)
+
Index: c/src/lib/libbsp/mips/hurricane/liblnk/pmon.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/liblnk/pmon.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/liblnk/pmon.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,180 @@
+/*
+ * pmon.S -- low-level entry points into PMON monitor.
+ *
+ * Copyright (c) 1996, 1997 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+
+#ifdef __mips16
+/* This file contains 32 bit assembly code.  */
+	.set nomips16
+#endif
+
+#if __mips < 3
+  /* This machine does not support 64-bit operations.  */
+  #define ADDU addu
+  #define SUBU subu
+#else
+  /* This machine supports 64-bit operations.  */
+  #define ADDU daddu
+  #define SUBU dsubu
+#endif
+
+#include "regs.S"
+
+	.text
+	.align	2
+
+#ifdef LSI
+  #define PMON_VECTOR 0xbfc00200
+#else
+  #define PMON_VECTOR 0xbfc00500
+#endif
+
+#ifndef __mips_eabi
+/* Provide named functions for entry into the monitor: */
+#define INDIRECT(name,index)				\
+	.globl	name;					\
+	.ent	name;					\
+	.set	noreorder;				\
+name:	la	$2,+(PMON_VECTOR+((index)*4));		\
+	lw	$2,0($2);				\
+	j	$2;					\
+	nop;						\
+	.set	reorder;				\
+	.end	name
+
+#else
+#define INDIRECT(name,index)				\
+	.globl	name;					\
+	.ent	name;					\
+	.set	noreorder;				\
+name:	la	$2,+(PMON_VECTOR+((index)*4));		\
+	lw	$2,0($2);				\
+	SUBU	sp,sp,0x40;				\
+	sd	ra,0x38(sp);				\
+	sd	fp,0x30(sp);				\
+	jal	$2;					\
+	move	fp,sp;					\
+	ld	ra,0x38(sp);				\
+	ld	fp,0x30(sp);				\
+	j	ra;					\
+	ADDU	sp,sp,0x40;				\
+	.set	reorder;				\
+	.end	name
+#endif
+
+
+/* The following magic numbers are for the slots into the PMON monitor */
+/* The first are used as the lo-level library run-time: */
+INDIRECT(mon_read,0)
+INDIRECT(mon_write,1)
+INDIRECT(mon_open,2)
+INDIRECT(mon_close,3)
+/* The following are useful monitor routines: */
+INDIRECT(mon_ioctl,4)
+INDIRECT(mon_printf,5)
+INDIRECT(mon_vsprintf,6)
+INDIRECT(mon_ttctl,7)
+INDIRECT(mon_cliexit,8)
+INDIRECT(mon_getenv,9)
+INDIRECT(mon_onintr,10)
+INDIRECT(mon_flush_cache,11)
+INDIRECT(mon_exception,12)
+INDIRECT(mon_fpgaconfig,21)
+
+#if 0
+
+/* The following routine is required by the "print()" function: */
+	.globl	pmon_outbyte
+	.ent	pmon_outbyte
+	.set	noreorder
+pmon_outbyte:
+	subu	sp,sp,0x20	/* allocate stack space for string */
+	sd	ra,0x18(sp)	/* stack return address */
+	sd	fp,0x10(sp)	/* stack frame-pointer */
+	move	fp,sp		/* take a copy of the stack pointer */
+	/* We leave so much space on the stack for the string (16
+	   characters), since the call to mon_printf seems to corrupt
+	   the 8bytes at offset 8 into the string/stack. */
+	sb	a0,0x00(sp)	/* character to print */
+	sb	z0,0x01(sp)	/* NUL terminator */
+	jal	mon_printf	/* and output the string */
+	move	a0,sp		/* take a copy of the string pointer {DELAY SLOT} */
+
+	move	sp,fp		/* recover stack pointer */
+	ld	ra,0x18(sp)	/* recover return address */
+	ld	fp,0x10(sp)	/* recover frame-pointer */
+	j	ra		/* return to the caller */
+	addu	sp,sp,0x20	/* dump the stack space {DELAY SLOT} */
+	.set	reorder
+	.end	pmon_outbyte
+
+/* The following routine is required by the "sbrk()" function: */
+	.globl	get_mem_info
+	.ent	get_mem_info
+	.set	noreorder
+get_mem_info:
+	# in:  a0 = pointer to 3 word structure
+	# out: void
+	subu	sp,sp,0x18	/* create some stack space */
+	sd	ra,0x00(sp)	/* stack return address */
+	sd	fp,0x08(sp)	/* stack frame-pointer */
+	sd	a0,0x10(sp)	/* stack structure pointer */
+	move	fp,sp		/* take a copy of the stack pointer */
+
+	# The monitor has already sized memory, but unfortunately we
+	# do not have access to the data location containing the
+	# memory size.
+
+	jal	__sizemem
+	nop
+
+	ld	a0,0x10(sp)	# recover structure pointer
+	sw	v0,0(a0)	# amount of memory available
+
+	# Deal with getting the cache size information:
+	mfc0	a1, C0_CONFIG
+	nop
+	nop
+	andi	a2,a1,0x7 << 9	# bits 11..9 for instruction cache size
+	sll	a2,a2,12 - 8
+	sw 	a2,4(a0)
+	andi	a2,a1,0x7 << 6	# bits 8..6 for data cache size
+	sll	a2,a2,12 - 5
+	sw 	a2,8(a0)	# data cache size
+	#
+	move	sp,fp		/* recover stack pointer */
+	ld	ra,0x00(sp)	/* recover return address */
+	ld	fp,0x08(sp)	/* recover frame-pointer */
+	j	ra		/* return to the caller */
+	addu	sp,sp,0x18	/* restore stack pointer {DELAY SLOT} */
+	.set	reorder
+	.end	get_mem_info
+
+#ifdef LSI
+
+# For the LSI MiniRISC board, we can safely assume that we have
+# at least one megabyte of RAM.
+
+	.globl	__sizemem
+	.ent	__sizemem
+__sizemem:
+	li	v0,0x100000
+	j	ra
+	.end	__sizemem
+#else
+
+#endif
+
+#endif
+/* EOF pmon.S */
Index: c/src/lib/libbsp/mips/hurricane/liblnk/regs.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/liblnk/regs.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/liblnk/regs.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,137 @@
+/*
+ * regs.S -- standard MIPS register names.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+
+/* Standard MIPS register names: */
+#define zero	$0
+#define z0	$0
+#define v0	$2
+#define v1	$3
+#define a0	$4
+#define a1	$5
+#define a2	$6
+#define a3	$7
+#define t0	$8
+#define t1	$9
+#define t2	$10
+#define t3	$11
+#define t4	$12
+#define t5	$13
+#define t6	$14
+#define t7	$15
+#define s0	$16
+#define s1	$17
+#define s2	$18
+#define s3	$19
+#define s4	$20
+#define s5	$21
+#define s6	$22
+#define s7	$23
+#define t8	$24
+#define t9	$25
+#define k0	$26	/* kernel private register 0 */
+#define k1	$27	/* kernel private register 1 */
+#define gp	$28	/* global data pointer */
+#define sp 	$29	/* stack-pointer */
+#define fp	$30	/* frame-pointer */
+#define ra	$31	/* return address */
+#define pc	$pc	/* pc, used on mips16 */
+
+#define fp0	$f0
+#define fp1	$f1
+
+/* Useful memory constants: */
+#define K0BASE		0x80000000
+#ifndef __mips64
+#define K1BASE		0xA0000000
+#else
+#define K1BASE		0xFFFFFFFFA0000000LL
+#endif
+
+#define PHYS_TO_K1(a)   ((unsigned)(a) | K1BASE)
+
+/* Standard Co-Processor 0 register numbers: */
+#define C0_COUNT	$9		/* Count Register */
+#define C0_SR		$12		/* Status Register */
+#define C0_CAUSE	$13		/* last exception description */
+#define C0_EPC		$14		/* Exception error address */
+#define C0_CONFIG	$16		/* CPU configuration */
+
+/* Standard Status Register bitmasks: */
+#define SR_CU1		0x20000000	/* Mark CP1 as usable */
+#define SR_FR		0x04000000	/* Enable MIPS III FP registers */
+#define SR_BEV		0x00400000	/* Controls location of exception vectors */
+#define SR_PE		0x00100000	/* Mark soft reset (clear parity error) */
+
+#define SR_KX		0x00000080	/* Kernel extended addressing enabled */
+#define SR_SX		0x00000040	/* Supervisor extended addressing enabled */
+#define SR_UX		0x00000020	/* User extended addressing enabled */
+
+/* Standard (R4000) cache operations. Taken from "MIPS R4000
+   Microprocessor User's Manual" 2nd edition: */
+
+#define CACHE_I		(0)	/* primary instruction */
+#define CACHE_D		(1)	/* primary data */
+#define CACHE_SI	(2)	/* secondary instruction */
+#define CACHE_SD	(3)	/* secondary data (or combined instruction/data) */
+
+#define INDEX_INVALIDATE		(0)	/* also encodes WRITEBACK if CACHE_D or CACHE_SD */
+#define INDEX_LOAD_TAG			(1)
+#define INDEX_STORE_TAG			(2)
+#define CREATE_DIRTY_EXCLUSIVE		(3)	/* CACHE_D and CACHE_SD only */
+#define HIT_INVALIDATE			(4)
+#define CACHE_FILL			(5)	/* CACHE_I only */
+#define HIT_WRITEBACK_INVALIDATE	(5)	/* CACHE_D and CACHE_SD only */
+#define HIT_WRITEBACK			(6)	/* CACHE_I, CACHE_D and CACHE_SD only */
+#define HIT_SET_VIRTUAL			(7)	/* CACHE_SI and CACHE_SD only */
+
+#define BUILD_CACHE_OP(o,c)		(((o) << 2) | (c))
+
+/* Individual cache operations: */
+#define INDEX_INVALIDATE_I		BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_I)
+#define INDEX_WRITEBACK_INVALIDATE_D	BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_D)
+#define INDEX_INVALIDATE_SI             BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SI)
+#define INDEX_WRITEBACK_INVALIDATE_SD	BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SD)
+
+#define INDEX_LOAD_TAG_I		BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_I)
+#define INDEX_LOAD_TAG_D                BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_D)
+#define INDEX_LOAD_TAG_SI               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SI)
+#define INDEX_LOAD_TAG_SD               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SD)
+
+#define INDEX_STORE_TAG_I              	BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_I)
+#define INDEX_STORE_TAG_D               BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_D)
+#define INDEX_STORE_TAG_SI              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SI)
+#define INDEX_STORE_TAG_SD              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SD)
+
+#define CREATE_DIRTY_EXCLUSIVE_D        BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_D)
+#define CREATE_DIRTY_EXCLUSIVE_SD       BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_SD)
+
+#define HIT_INVALIDATE_I                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_I)
+#define HIT_INVALIDATE_D                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_D)
+#define HIT_INVALIDATE_SI               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SI)
+#define HIT_INVALIDATE_SD               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SD)
+
+#define CACHE_FILL_I                    BUILD_CACHE_OP(CACHE_FILL,CACHE_I)
+#define HIT_WRITEBACK_INVALIDATE_D      BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_D)
+#define HIT_WRITEBACK_INVALIDATE_SD     BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_SD)
+
+#define HIT_WRITEBACK_I                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_I)
+#define HIT_WRITEBACK_D                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_D)
+#define HIT_WRITEBACK_SD                BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_SD)
+
+#define HIT_SET_VIRTUAL_SI		BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SI)
+#define HIT_SET_VIRTUAL_SD              BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SD)
+
+/*> EOF regs.S <*/
Index: c/src/lib/libbsp/mips/hurricane/start/start.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/start/start.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/start/start.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,342 @@
+/*
+
+Based upon IDT provided code with the following release:
+
+This source code has been made available to you by IDT on an AS-IS
+basis. Anyone receiving this source is licensed under IDT copyrights
+to use it in any way he or she deems fit, including copying it,
+modifying it, compiling it, and redistributing it either with or
+without modifications.  No license under IDT patents or patent
+applications is to be implied by the copyright license.
+
+Any user of this software should understand that IDT cannot provide
+technical support for this software and will not be responsible for
+any consequences resulting from the use of this software.
+
+Any person who transfers this source code or any derivative work must
+include the IDT copyright notice, this paragraph, and the preceeding
+two paragraphs in the transferred software.
+
+COPYRIGHT IDT CORPORATION 1996
+LICENSED MATERIAL - PROGRAM PROPERTY OF IDT
+
+  start.S,v 1.6 2001/09/28 23:14:23 joel Exp
+*/ 
+
+/*************************************************************************
+**
+** Copyright 1991-95 Integrated Device Technology, Inc.
+**	All Rights Reserved
+**
+** idt_csu.S -- IDT stand alone startup code
+**
+**************************************************************************/
+#include <rtems/mips/iregdef.h>
+#include <rtems/mips/idtcpu.h>
+#include <rtems/asm.h>
+
+
+#if 0	
+	.extern _fdata,4		/* this is defined by the linker */
+	.extern _edata,4		/* this is defined by the linker */
+	.extern _idata,4		/* this is defined by the linker */
+#endif
+	.extern _fbss,4		  /* this is defined by the linker */
+	.extern end,4		  /* this is defined by the linker */
+
+	.lcomm sim_mem_cfg_struct,12
+
+	.text
+
+/* For the V3 Eval board, we can safely assume that we have
+  at least 16 megabytes of RAM */
+#define HARD_CODED_MEM_SIZE 0x1000000
+
+#define TMP_STKSIZE  1024 
+
+/*
+** P_STACKSIZE is the size of the Prom Stack. 
+** the prom stack grows downward 
+*/
+#define	P_STACKSIZE	0x2000   /* sets stack size to 8k */
+
+/**************************************************************************
+**
+**  start - Typical standalone start up code required for R3000/R4000
+**
+**
+**	1)  Initialize the STATUS Register
+**		a) Clear parity error bit
+**		b) Set co_processor 1 usable bit ON
+**		c) Clear all IntMask Enables
+**		d) Set kernel/disabled mode
+**	2)  Initialize Cause Register
+**		a)  clear software interrupt bits       
+**	3)  Determine FPU installed or not
+**		if not, clear CoProcessor 1 usable bit
+**	4)  Clear bss area
+**	5)  MUST allocate temporary stack until memory size determined
+**	    It MUST be uncached to prevent overwriting when caches are cleared
+**	6)  Install exception handlers
+**	7)  Determine memory and cache sizes
+**	8)  Establish permanent stack (cached or uncached as defined by bss)
+**	9)  Flush Instruction and Data caches
+** 	10)  If there is a Translation Lookaside Buffer, Clear the TLB
+** 	11)  Execute initialization code if the IDT/c library is to be used
+** 
+** 	12)  Jump to user's "main()" (boot_card() for RTEMS)
+** 	13)  Jump to promexit
+**
+**	IDT/C 5.x defines _R3000, IDT/C 6.x defines _R4000 internally. 
+**	This is used to mark code specific to R3xxx or R4xxx processors.
+**	IDT/C 6.x defines __mips to be the ISA level for which we're 
+**	generating code. This is used to make sure the stack etc. is 
+**	double word aligned, when using -mips3 (default) or -mips2, 
+**	when compiling with IDT/C6.x
+**
+***************************************************************************/
+
+FRAME(start,sp,0,ra)
+
+	.set	noreorder
+#if __mips_fpr == 64
+	li	v0,SR_CU1|SR_FR|SR_DE 	/* initally clear ERL, enable FPU with 64 bit regs, disable cache errors */
+#else
+	li	v0,SR_CU1|SR_DE	 	/* initally clear ERL, enable FPU with 32 bit regs, disable cache errors */
+#endif
+
+	mtc0	v0,C0_SR		/* clr IntMsks/ kernel/disabled mode */
+	nop
+	mtc0	zero,C0_CAUSE		/* clear software interrupts */
+	nop
+	
+	la	t0,0xBE200000		/* on Hurricane board, enable interrupt output signal from UART ch. B */
+	li	t1,0x8			/* UART INT B signal is left tri-state'd after reset, this results in processor interrupt signal being driven active low */
+	sw	t1,0x10(t0)
+
+	li	v0,CFG_C_NONCOHERENT	# initialise default cache mode
+	mtc0	v0,C0_CONFIG
+
+/*
+**	check to see if an fpu is really plugged in 
+*/
+	li	t3,0xaaaa5555		/*  put a's and 5's in t3	*/
+	mtc1	t3,fp0			/* try to write them into fp0   */	
+	mtc1	zero,fp1		/* try to write zero in fp	*/
+	mfc1	t0,fp0
+	mfc1	t1,fp1
+	nop
+	bne	t0,t3,1f		/* branch if no match  */
+	nop
+	bne	t1,zero,1f		/* double check for positive id   */
+	nop
+	/* We have a FPU. clear fcsr */
+	ctc1	zero, fcr31
+	j	2f			/* status register already correct  */
+	nop
+1:
+        li      v0,SR_DE	 		/* clear ERL and disable FPA */
+
+	mtc0	v0, C0_SR		/* reset status register */
+2:
+	la  	gp, _gp			
+
+#if 0
+					/* Initialize data sections from "rom" copy */
+	la	t0,_idata		/* address of initialization data (copy of data sections placed in ROM) */
+	la	t1,_fdata		/* start of initialized data section */
+	la	t2,_edata		/* end of initialized data section */
+3:
+	lw	t3,0(t0)
+	sw	t3,0(t1)
+	addiu	t1,t1,4
+	bne	t1,t2,3b
+	addiu	t0,t0,4
+#endif
+
+	 				/* clear bss before using it */
+	la	v0,_fbss		/* start of bss */
+	la	v1,end 			/* end of bss */
+4:	sw	zero,0(v0)
+	bltu	v0,v1,4b
+	add	v0,4 
+
+
+/************************************************************************
+**
+** 	Temporary Stack - needed to  handle stack saves until
+**			  memory size is determined and permanent stack set
+**
+**			  MUST be uncached to avoid confusion at cache
+**			       switching during memory sizing
+**
+*************************************************************************/
+	/* For MIPS 3, we need to be sure that the stack is aligned on a
+	 * double word boundary. 
+	 */
+	andi	t0, v0, 0x7
+	beqz	t0, 11f   /* Last three bits Zero, already aligned */
+	nop
+	add	v0, 4
+11:
+
+	or	v0, K1BASE		/* switch to uncached */
+	add	v1, v0, TMP_STKSIZE 	/* end of bss + length of tmp stack */
+	sub	v1, v1, (4*4)		/* overhead */
+	move	sp, v1			/* set sp to top of stack */
+4:	sw	zero, 0(v0)  
+	bltu	v0, v1, 4b		/* clear out temp stack */
+	add	v0, 4 
+	
+/* 	jal	init_exc_vecs */		/* install exception handlers */ 
+/*	nop */				/* MUST do before memory probes */
+
+					/* Force processor into uncached space during memory/cache probes */
+	la	v0, 5f
+	li	v1, K1BASE
+	or	v0, v1
+	j	v0
+	nop
+5:
+
+	li	a0, HARD_CODED_MEM_SIZE	/* Set memory size global */
+	jal	set_memory_size
+	nop
+
+	la	a0, sim_mem_cfg_struct
+	jal	get_mem_conf		/* Make call to get mem size */
+	nop
+	la	a0, sim_mem_cfg_struct
+	lw	a0, 0(a0)		/* Get memory size from struct */
+
+	jal	config_cache		/* determine size of D & I caches */
+	nop
+
+	move	v0, a0			/* mem_size */
+
+	/* For MIPS 3, we need to be sure that the stack (and hence v0
+	 * here) is aligned on a double word boundary. 
+	 */
+	andi	t0, v0, 0x7
+	beqz	t0, 12f   /* Last three bits Zero, already aligned */
+	nop
+	subu	v0, 4	/* mem_size was not aligned on doubleword bdry????*/
+12:
+
+
+
+/**************************************************************************
+**
+**  Permanent Stack - now know top of memory, put permanent stack there	
+**
+***************************************************************************/ 
+
+	la	t2, _fbss		/* cache mode as linked */
+	and	t2, 0xF0000000		/* isolate segment */
+	la	t1, 6f
+	j	t1			/* back to original cache mode */
+	nop
+6:
+	or 	v0, t2			/* stack back to original cache mode */
+	addiu   v0,v0,-16		/* overhead */
+	move	sp, v0			/* now replace count w top of memory */
+	move	v1, v0
+	subu	v1, P_STACKSIZE 	/* clear requested stack size */
+
+7:	sw	zero, 0(v1)		/* clear P_STACKSIZE  stack */ 
+	bltu	v1,v0,7b
+	add	v1, 4 
+	.set	reorder
+
+/* FIX THIS - This corrupts memory spaces */
+/*	jal	flush_cache_nowrite	*/	/* flush Data & Instruction caches */
+
+/*	jal	mon_flush_cache		*/
+
+/**************************************************************************
+**
+**	If this chip supports a Translation Lookaside Buffer, clear it
+**
+***************************************************************************/ 
+
+	.set	noreorder
+	mfc0	t1,  C0_SR		/* look at Status Register */
+	nop
+	.set 	reorder
+
+	jal	init_tlb		/* clear the tlb */
+
+/* Force processor into cached instruction space for rest of initialization */
+#if 0
+	la	t0, 1f
+	li	t1, K0BASE		/* force into cached space */
+	or	t0, t1
+	j	t0
+	nop
+1:
+#endif
+
+/************************************************************************
+**
+**  Initialization required if using IDT/c or libc.a, standard C Lib 
+**
+**  can SKIP if not necessary for application
+**
+************************************************************************/
+8:
+
+/* FIX THIS - Need the pmon equivalent
+	jal	idtsim_init_sbrk
+	jal	idtsim_init_file
+*/
+
+/***********************  END I/O initialization **********************/
+
+
+	move	a0,zero		/* Set argc passed to main */
+	move	a1,zero		/* Set argv passed to main */
+	jal	boot_card
+	nop
+
+	# jump to the "exit" routine
+	jal	_sys_exit
+	move	a0,v0				# pass through the exit code
+
+
+	# FIX THIS - Need the pmon equivalent
+	# jal	idtsim_promexit
+
+1:
+	beq	zero,zero,1b
+	nop
+	
+ENDFRAME(start)
+
+/*
+ * _sys_exit -- Exit from the application. Normally we cause a user trap
+ *          to return to the ROM monitor for another run. NOTE: This is
+ *	    the only other routine we provide in the crt0.o object, since
+ *          it may be tied to the "_start" routine. It also allows
+ *          executables that contain a complete world to be linked with
+ *          just the crt0.o object.
+ */
+FRAME(_sys_exit,sp,0,ra)
+
+	break	1023
+	nop
+13:
+	b	13b				# but loop back just in-case
+	nop
+	
+ENDFRAME(_sys_exit)
+
+
+
+	.globl	__sizemem
+	.ent	__sizemem
+__sizemem:
+	li	v0,HARD_CODED_MEM_SIZE
+	j	ra
+	nop
+	.end	__sizemem
+
Index: c/src/lib/libbsp/mips/hurricane/startup/bspclean.c
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/bspclean.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/bspclean.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,37 @@
+/*  bsp_cleanup()
+ *
+ *  This routine normally is part of start.s and usually returns
+ *  control to a monitor.
+ *
+ *  INPUT:  NONE
+ *
+ *  OUTPUT: NONE
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  bspclean.c,v 1.9.6.1 2003/09/04 18:44:52 joel Exp
+ */
+
+/*
+ *  Rather than deleting this, it is commented out to (hopefully) help
+ *  the submitter send updates.
+ *
+ *  static char _sccsid[] = "@(#)bspclean.c 03/15/96     1.1\n";
+ */
+
+
+
+#include <rtems.h>
+#include <bsp.h>
+
+void idtsim__exit();
+
+void bsp_cleanup( void )
+{
+  idtsim__exit();
+}
Index: c/src/lib/libbsp/mips/hurricane/startup/bspstart.c
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/bspstart.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/bspstart.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,124 @@
+/*
+ *  This routine starts the application.  It includes application,
+ *  board, and monitor specific initialization and configuration.
+ *  The generic CPU dependent initialization has been performed
+ *  before this routine is invoked.
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  bspstart.c,v 1.14.6.1 2003/09/04 18:44:52 joel Exp
+ */
+
+/*
+ *  Rather than deleting this, it is commented out to (hopefully) help
+ *  the submitter send updates.
+ *
+ *  static char _sccsid[] = "@(#)bspstart.c 06/11/96     1.2\n";
+ */
+
+#include <string.h>
+
+#include <bsp.h>
+#include <rtems/libio.h>
+#include <rtems/libcsupport.h>
+ 
+/*
+ *  The original table from the application and our copy of it with
+ *  some changes.
+ */
+
+extern rtems_configuration_table Configuration;
+
+rtems_configuration_table  BSP_Configuration;
+
+rtems_cpu_table Cpu_table;
+
+char *rtems_progname;
+
+/*
+ *  Use the shared implementations of the following routines
+ */
+ 
+void bsp_postdriver_hook(void);
+void bsp_libc_init( void *, uint32_t, int );
+
+void init_exc_vecs(void);
+
+/*
+ *  Function:   bsp_pretasking_hook
+ *  Created:    95/03/10
+ *
+ *  Description:
+ *      BSP pretasking hook.  Called just before drivers are initialized.
+ *      Used to setup libc and install any BSP extensions.
+ *
+ *  NOTES:
+ *      Must not use libc (to do io) from here, since drivers are
+ *      not yet initialized.
+ *
+ */
+ 
+#define LIBC_HEAP_SIZE (64 * 1024)
+
+void bsp_pretasking_hook(void)
+{
+    extern int end;
+    uint32_t heap_start;
+
+    heap_start = (uint32_t) &end;
+    if (heap_start & (CPU_ALIGNMENT-1))
+        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
+
+    bsp_libc_init((void *) heap_start, LIBC_HEAP_SIZE, 0);
+
+#ifdef RTEMS_DEBUG
+    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
+#endif
+}
+ 
+extern int end; /* defined by linker */
+
+/*
+ *  bsp_start
+ *
+ *  This routine does the bulk of the system initialization.
+ */
+
+void bsp_start( void )
+{
+  /*
+   *  Allocate the memory for the RTEMS Work Space.  This can come from
+   *  a variety of places: hard coded address, malloc'ed from outside
+   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
+   *  typically done by stock BSPs) by subtracting the required amount
+   *  of work space from the last physical address on the CPU board.
+   */
+
+  /*
+   *  Need to "allocate" the memory for the RTEMS Workspace and
+   *  tell the RTEMS configuration where it is.  This memory is
+   *  not malloc'ed.  It is just "pulled from the air".
+   */
+
+  BSP_Configuration.work_space_start =
+       (void *)((uint64_t)((&end) + LIBC_HEAP_SIZE + 0x2000) & ~0x7);
+
+  /*
+   *  initialize the CPU table for this BSP
+   */
+
+  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
+  Cpu_table.postdriver_hook = bsp_postdriver_hook;
+  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
+  Cpu_table.clicks_per_microsecond = CPU_CLOCK_RATE_MHZ;
+
+  mips_install_isr_entries();		/* Install generic MIPS exception handler */
+
+/*  init_exc_vecs(); */         			/* Install BSP specific exception handler */
+
+}
Index: c/src/lib/libbsp/mips/hurricane/startup/exception.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/exception.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/exception.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,687 @@
+/*  exception.S
+ *
+ *  This file contains a customized MIPS exception handler.
+ *  It hooks into the exception handler present in the resident
+ *  PMON debug monitor.
+ *
+ *  Author: Bruce Robinson
+ *
+ *  This code was derived from cpu_asm.S with the following copyright:
+ *
+ *  COPYRIGHT (c) 1996 by Transition Networks Inc.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of Transition Networks not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      Transition Networks makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  Derived from c/src/exec/score/cpu/no_cpu/cpu_asm.s:
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.OARcorp.com/rtems/license.html.
+ *
+ *  $Id$
+ */
+/* @(#)exception.S       10/11/04     1.00 */
+
+#include <rtems/mips/iregdef.h>
+#include <rtems/mips/idtcpu.h>
+#include <usc.h>
+
+
+#define FRAME(name,frm_reg,offset,ret_reg)      \
+        .globl  name;                           \
+        .ent    name;                           \
+name:;                                          \
+        .frame  frm_reg,offset,ret_reg
+#define ENDFRAME(name)                          \
+        .end name
+
+
+#if __mips == 3
+/* 64 bit register operations */
+#define NOP	nop
+#define ADD	dadd
+#define STREG	sd
+#define LDREG	ld
+#define ADDU	addu
+#define ADDIU	addiu
+#define STREGC1	sdc1
+#define LDREGC1	ldc1
+#define R_SZ	8
+#define F_SZ	8
+#define SZ_INT	8
+#define SZ_INT_POW2 3
+
+/* XXX if we don't always want 64 bit register ops, then another ifdef */
+
+#elif __mips == 1
+/* 32 bit register operations*/
+#define NOP	nop
+#define ADD	add
+#define STREG	sw
+#define LDREG	lw
+#define ADDU	add
+#define ADDIU	addi
+#define STREGC1	swc1
+#define LDREGC1	lwc1
+#define R_SZ	4
+#define F_SZ	4
+#define SZ_INT	4
+#define SZ_INT_POW2 2
+#else
+#error "mips assembly: what size registers do I deal with?"
+#endif
+
+
+#define ISR_VEC_SIZE	4
+#define EXCP_STACK_SIZE (NREGS*R_SZ)
+
+
+#ifdef __GNUC__
+#define EXTERN(x,size) .extern x,size
+#else
+#define EXTERN(x,size)
+#endif
+
+
+EXTERN(_ISR_Nest_level, 4)
+EXTERN(_Thread_Dispatch_disable_level,4)
+EXTERN(_Context_Switch_necessary,4)
+EXTERN(_ISR_Signals_to_thread_executing,4)
+.extern _Thread_Dispatch
+.extern _ISR_Vector_table
+
+/*  void __ISR_Handler()
+ *
+ *  This routine provides the RTEMS interrupt management.
+ *
+ */
+
+#if 0
+void _ISR_Handler()
+{
+   /*
+    *  This discussion ignores a lot of the ugly details in a real
+    *  implementation such as saving enough registers/state to be
+    *  able to do something real.  Keep in mind that the goal is
+    *  to invoke a user's ISR handler which is written in C and
+    *  uses a certain set of registers.
+    *
+    *  Also note that the exact order is to a large extent flexible.
+    *  Hardware will dictate a sequence for a certain subset of
+    *  _ISR_Handler while requirements for setting
+    */
+
+  /*
+   *  At entry to "common" _ISR_Handler, the vector number must be
+   *  available.  On some CPUs the hardware puts either the vector
+   *  number or the offset into the vector table for this ISR in a
+   *  known place.  If the hardware does not give us this information,
+   *  then the assembly portion of RTEMS for this port will contain
+   *  a set of distinct interrupt entry points which somehow place
+   *  the vector number in a known place (which is safe if another
+   *  interrupt nests this one) and branches to _ISR_Handler.
+   *
+   */
+#endif
+FRAME(hurricane_ISR_Handler,sp,0,ra)
+	.set noreorder
+
+	mfc0 k0,C0_CAUSE	/* Determine if an interrupt generated this exception */
+	nop
+	and k1,k0,CAUSE_EXCMASK
+	beq k1,zero,_chk_int	/* If so, branch to service here */
+	nop
+1:	la  k0,_int_esr_link	/* Otherwise, jump to next exception handler in PMON exception chain */
+	lw  k0,(k0)
+	lw  k0,4(k0)
+	j   k0
+	nop
+_chk_int:
+	mfc0 k1,C0_SR
+	nop
+	and k0,k1
+	and k0,CAUSE_IPMASK
+	beq k0,zero,_ISR_Handler_quick_exit	/* external interrupt not enabled, ignore */
+
+	nop
+
+/* For debugging interrupts, clear EXL to allow breakpoints */
+#if 0
+        MFC0    k0, C0_SR
+#if __mips == 3
+	li	k1,SR_EXL	/* Clear EXL and Set IE to enable interrupts */
+	not	k1
+	and	k0,k1
+	li	k1,SR_IE
+#elif __mips == 1
+	li	k1,SR_IEC
+#endif
+	or	k0, k1
+        mtc0    k0, C0_SR
+	NOP
+#endif
+
+
+  /*
+   *  save some or all context on stack
+   *  may need to save some special interrupt information for exit
+   */
+
+        /* Q: _ISR_Handler, not using IDT/SIM ...save extra regs? */
+
+        /* wastes a lot of stack space for context?? */
+	ADDIU    sp,sp,-EXCP_STACK_SIZE
+
+        STREG ra, R_RA*R_SZ(sp)  /* store ra on the stack */ 
+        STREG v0, R_V0*R_SZ(sp)
+        STREG v1, R_V1*R_SZ(sp)
+        STREG a0, R_A0*R_SZ(sp)
+        STREG a1, R_A1*R_SZ(sp)
+        STREG a2, R_A2*R_SZ(sp)
+        STREG a3, R_A3*R_SZ(sp)
+        STREG t0, R_T0*R_SZ(sp)
+        STREG t1, R_T1*R_SZ(sp)
+        STREG t2, R_T2*R_SZ(sp)
+        STREG t3, R_T3*R_SZ(sp)
+        STREG t4, R_T4*R_SZ(sp)
+        STREG t5, R_T5*R_SZ(sp)
+        STREG t6, R_T6*R_SZ(sp)
+        STREG t7, R_T7*R_SZ(sp)
+        mflo  t0
+        STREG t8, R_T8*R_SZ(sp)
+        STREG t0, R_MDLO*R_SZ(sp) 
+        STREG t9, R_T9*R_SZ(sp)
+        mfhi  t0
+        STREG gp, R_GP*R_SZ(sp)
+        STREG t0, R_MDHI*R_SZ(sp) 
+        STREG fp, R_FP*R_SZ(sp)
+	
+        .set noat
+        STREG AT, R_AT*R_SZ(sp)
+        .set at
+
+        mfc0     t0,C0_SR
+	dmfc0    t1,C0_EPC
+        STREG    t0,R_SR*R_SZ(sp)
+        STREG    t1,R_EPC*R_SZ(sp)
+
+  /*
+   *
+   *  #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
+   *    if ( _ISR_Nest_level == 0 )
+   *      switch to software interrupt stack
+   *  #endif
+   */
+
+  /*
+   *  _ISR_Nest_level++;
+   */
+        lw	t0,_ISR_Nest_level
+	NOP
+        add	t0,t0,1
+        sw	t0,_ISR_Nest_level
+  /*
+   *  _Thread_Dispatch_disable_level++;
+   */
+        lw	t1,_Thread_Dispatch_disable_level
+	NOP
+        add	t1,t1,1
+        sw	t1,_Thread_Dispatch_disable_level
+
+  /*
+   *  Call the CPU model or BSP specific routine to decode the
+   *  interrupt source and actually vector to device ISR handlers.
+   */
+	move	 a0,sp
+        jal      mips_vector_isr_handlers
+        NOP
+
+_ISR_Handler_cleanup:
+
+  /*
+   *  --_ISR_Nest_level;
+   */
+        lw	t2,_ISR_Nest_level
+	NOP
+        add	t2,t2,-1
+        sw	t2,_ISR_Nest_level
+  /*
+   *  --_Thread_Dispatch_disable_level;
+   */
+        lw	t1,_Thread_Dispatch_disable_level
+	NOP
+        add	t1,t1,-1
+        sw	t1,_Thread_Dispatch_disable_level
+  /*
+   *  if ( _Thread_Dispatch_disable_level || _ISR_Nest_level )
+   *    goto the label "exit interrupt (simple case)"
+   */
+        or  t0,t2,t1
+        bne t0,zero,_ISR_Handler_exit
+        NOP
+
+
+  /*
+   *  #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
+   *    restore stack
+   *  #endif
+   *  
+   *  if ( !_Context_Switch_necessary && !_ISR_Signals_to_thread_executing )
+   *    goto the label "exit interrupt (simple case)"
+   */
+        lw	t0,_Context_Switch_necessary
+        lw	t1,_ISR_Signals_to_thread_executing
+	NOP
+        or	t0,t0,t1
+        beq	t0,zero,_ISR_Handler_exit
+        NOP
+
+/*
+** Turn on interrupts before entering Thread_Dispatch which
+** will run for a while, thus allowing new interrupts to
+** be serviced.  Observe the Thread_Dispatch_disable_level interlock
+** that prevents recursive entry into Thread_Dispatch.
+*/
+
+        mfc0    t0, C0_SR
+#if __mips == 3
+	li	t1,SR_EXL	/* Clear EXL and Set IE to enable interrupts */
+	not	t1
+	and	t0,t1
+	li	t1,SR_IE
+#elif __mips == 1
+	li	t1,SR_IEC
+#endif
+	or	t0, t1
+        mtc0    t0, C0_SR
+	NOP
+
+	/* save off our stack frame so the context switcher can get to it */
+	la	t0,__exceptionStackFrame
+	STREG	sp,(t0)
+					
+        jal     _Thread_Dispatch
+        NOP
+
+	/* and make sure its clear in case we didn't dispatch.  if we did, its
+	** already cleared */
+	la	t0,__exceptionStackFrame
+	STREG	zero,(t0)
+	NOP
+
+/* 
+** turn interrupts back off while we restore context so
+** a badly timed interrupt won't accidentally mess things up
+*/
+        mfc0    t0, C0_SR
+#if __mips == 3
+	li	t1,SR_IE		/* Clear IE first (recommended) */
+	not	t1
+	and	t0,t1
+        mtc0    t0, C0_SR
+	li	t1,SR_EXL | SR_IE	/* Set EXL and IE, this puts status register bits back to interrupted state */
+	or	t0,t1
+#elif __mips == 1
+	/* ints off, current & prev kernel mode on (kernel mode enabled is bit clear..argh!) */
+	li	t1,SR_IEC | SR_KUP | SR_KUC	
+	not	t1
+	and	t0, t1
+#endif
+
+#if __mips == 1
+	/* disabled 7/29, gregm, this tasks context was saved previously in an interrupt,
+	** so we'll just restore the task's previous interrupt enables.
+
+	**
+	** make sure previous int enable is on  because we're returning from an interrupt
+	** which means interrupts have to be enabled
+	
+	li	t1,SR_IEP
+	or	t0,t1
+	*/
+#endif
+        mtc0    t0, C0_SR
+	NOP
+	
+  /*
+   *  prepare to get out of interrupt
+   *  return from interrupt  (maybe to _ISR_Dispatch)
+   *
+   *  LABEL "exit interrupt (simple case):"
+   *  prepare to get out of interrupt
+   *  return from interrupt
+   */
+
+_ISR_Handler_exit:
+
+/* restore interrupt context from stack */
+        LDREG t8, R_MDLO*R_SZ(sp)
+        LDREG t0, R_T0*R_SZ(sp)
+        mtlo  t8
+        LDREG t8, R_MDHI*R_SZ(sp)           
+        LDREG t1, R_T1*R_SZ(sp)
+        mthi  t8
+        LDREG t2, R_T2*R_SZ(sp)
+        LDREG t3, R_T3*R_SZ(sp)
+        LDREG t4, R_T4*R_SZ(sp)
+        LDREG t5, R_T5*R_SZ(sp)
+        LDREG t6, R_T6*R_SZ(sp)
+        LDREG t7, R_T7*R_SZ(sp)
+        LDREG t8, R_T8*R_SZ(sp)
+        LDREG t9, R_T9*R_SZ(sp)
+        LDREG gp, R_GP*R_SZ(sp)
+        LDREG fp, R_FP*R_SZ(sp)
+        LDREG ra, R_RA*R_SZ(sp)
+        LDREG a0, R_A0*R_SZ(sp)
+        LDREG a1, R_A1*R_SZ(sp)
+        LDREG a2, R_A2*R_SZ(sp)
+        LDREG a3, R_A3*R_SZ(sp)
+        LDREG v1, R_V1*R_SZ(sp)
+        LDREG v0, R_V0*R_SZ(sp)
+	
+        LDREG k1, R_EPC*R_SZ(sp)
+	mtc0  k1,C0_EPC
+	
+	.set noat
+        LDREG     AT, R_AT*R_SZ(sp)
+        .set at
+
+        ADDIU     sp,sp,EXCP_STACK_SIZE
+
+_ISR_Handler_quick_exit:
+	eret
+	nop
+
+
+	/* Interrupts from USC320 are serviced here */
+	.global	USC_isr
+	.extern	Clock_isr	
+USC_isr:
+	/* check if it's a USC320 heartbeat interrupt */
+        la      k0,INT_STAT	/* read INT_STAT register */
+        lw      k0,(k0)
+        nop			/* reading from external device	*/
+        sll     k0,(31-21)	/* test bit 21 (HBI) */
+        
+        bgez	k0,USC_isr2	/* branch if not a heartbeat interrupt */
+
+	/* clear the heartbeat interrupt */
+	la      k0,INT_STAT
+	li      t0,HBI_MASK
+	sw      t0,(k0)
+	/* wait for interrupt to clear */
+USC_isr1:
+	la      k0,INT_STAT	/* read INT_STAT register */
+	lw      k0,(k0)
+	nop			/* reading from external device */
+        sll     k0,(31-21)	/* test bit 21 (HBI) */
+        bltz    k0,USC_isr1   	/* branch if bit set */
+        nop
+	j	Clock_isr	/* Jump to clock isr */
+	nop
+USC_isr2:
+	j	ra		/* no serviceable interrupt, return without doing anything */
+	nop		
+
+       .set    reorder
+
+ENDFRAME(hurricane_ISR_Handler)
+
+
+FRAME(_BRK_Handler,sp,0,ra)
+	.set noreorder
+
+	la	k0,INT_CFG3	/* Disable heartbeat interrupt in USC320, it interferes with PMON exception handler */
+	lw	k1,(k0)
+	li	k0,~HBI_MASK
+	and	k1,k1,k0
+	la	k0,INT_CFG3
+	sw	k1,(k0)
+	
+	la  k0,_brk_esr_link	/* Jump to next exception handler in PMON exception chain */
+	lw  k0,(k0)
+	lw  k0,4(k0)
+	j   k0
+	nop
+
+	.set reorder
+ENDFRAME(_BRK_Handler)
+
+
+/**************************************************************************
+**
+**	init_exc_vecs() - moves the exception code into the addresses
+**			  reserved for exception vectors
+**
+**	UTLB Miss exception vector at address 0x80000000
+**
+**	General exception vector at address 0x80000080
+**
+**	RESET exception vector is at address 0xbfc00000
+**
+***************************************************************************/
+
+FRAME(init_exc_vecs,sp,0,ra)
+	.set noreorder
+
+	.extern mon_onintr
+	
+/* Install interrupt handler in PMON exception handling chain */
+
+	addiu	sp,sp,-8
+	sw	ra,(sp)			/* Save ra contents on stack */
+	move	a0,zero
+	la	a1,_int_esr_link
+	jal	mon_onintr		/* Make PMON system call to install interrupt exception handler */
+	nop
+	li	a0,9
+	la	a1,_brk_esr_link
+	jal	mon_onintr		/* Make PMON system call to install break exception handler */
+	nop
+	lw	ra,(sp)
+	addiu	sp,sp,8			/* Restore ra contents from stack */
+	j	ra
+	nop
+
+	.set reorder
+ENDFRAME(init_exc_vecs)
+
+
+
+/***************************************************************************
+**
+**   The following code was added to support boards using V3 USC320
+**     system controller chip.
+**
+****************************************************************************/
+
+/*************************************************************
+*  init_hbt()
+*	Initialize the heartbeat timer
+*/
+FRAME(init_hbt,sp,0,ra)
+	.set noreorder
+	la	t0,SYSTEM	# Unlock USC registers
+	li	t1,0xA5
+	sb	t1,(t0)
+	
+	la	t0,WD_HBI	# Initialize heatbeat and watchdog timers
+
+				# (1 / 64 MHz) * 4000 * (63 + 1) = 4000.0 microseconds 
+				# Watchdog period is heartbeat period times watchdog timer constant (bits 7 - 0)
+				# Watchdog period = 4000 * 5 = 20000 microseconds
+	li	t1,(WD_EN | HBI_4000_PS | 0x00003F00 | 0x5)
+
+				# (1 / 64 MHz) * 4000 * (15 + 1) = 1000.0 microseconds 
+				# Watchdog period is heartbeat period times watchdog timer constant (bits 7 - 0)
+				# Watchdog period = 1000 * 20 = 20000 microseconds
+	li	t1,(WD_EN | HBI_4000_PS | 0x00000F00 | 0x14)
+
+				# (1 / 64 MHz) * 40000 * (15 + 1) = 10000.0 microseconds 
+				# Watchdog period is heartbeat period times watchdog timer constant (bits 7 - 0)
+				# Watchdog period = 10000 * 20 = 200000 microseconds
+	li	t1,(WD_EN | HBI_4000_PS | 0x00009600 | 0x14)
+
+	sw	t1,(t0)
+	
+	la	t0,SYSTEM	# Lock USC registers
+	li	t1,0x60
+	sb	t1,(t0)
+	
+	.set reorder
+	j	ra
+	nop
+	.set reorder
+ENDFRAME(init_hbt)
+
+/*************************************************************
+*  reset_wdt()
+*	Reset the watchdog timer
+*/
+FRAME(reset_wdt,sp,0,ra)
+	.set noreorder
+
+	la	t0,WD_HBI+2	# Load address watchdog timer reset byte
+	li	t1,WD_INIT	
+	sb	t1,(t0)
+	
+	.set reorder
+	j	ra
+	nop
+	.set reorder
+ENDFRAME(reset_wdt)
+
+/*************************************************************
+*  disable_wdt()
+*	Disable watchdog timer
+*/
+FRAME(disable_wdt,sp,0,ra)
+	.set noreorder
+	la	t0,WD_HBI	# Clear watchdog enable bit in control register
+	lw	t1,(t0)
+	li	t2,~WD_EN
+	and	t1,t1,t2
+	sw	t1,(t0)
+	
+	.set reorder
+	j	ra
+	nop
+	.set reorder
+ENDFRAME(disable_wdt)
+
+/*************************************************************
+*  enable_hbi(ints)
+*	Enable the heartbeat interrupt
+*/
+FRAME(enable_hbi,sp,0,ra)
+	.set noreorder
+	
+	la	t0,INT_CFG3	# Enable heartbeat interrupt in USC320
+	lw	t1,(t0)
+	li	t2,(HBI_MASK | MODE_TOTEM_POLE)
+	or	t1,t1,t2
+	sw	t1,(t0)
+	
+	.set reorder
+	j	ra
+	nop
+	.set reorder
+ENDFRAME(enable_hbi)
+
+/*************************************************************
+*  disable_hbi(ints)
+*	Disable the heartbeat interrupt
+*/
+FRAME(disable_hbi,sp,0,ra)
+	.set noreorder
+	la	t0,INT_CFG3	# Disable heartbeat interrupt in USC320
+	lw	t1,(t0)
+	li	t2,~HBI_MASK
+	and	t1,t1,t2
+	sw	t1,(t0)
+	
+	.set reorder
+	j	ra
+	nop
+	.set reorder
+ENDFRAME(disable_hbi)
+
+
+/*************************************************************
+*  enable_wdi()
+*	Enable the watchdog interrupt
+*/
+FRAME(enable_wdi,sp,0,ra)
+	.set noreorder
+	
+	la	t0,INT_CFG1	# Enable watchdog interrupt in USC320
+	lw	t1,(t0)
+	li	t2,(WDI_MASK | MODE_TOTEM_POLE)
+	or	t1,t1,t2
+	sw	t1,(t0)
+	
+	.set reorder
+	j	ra
+	nop
+	.set reorder
+ENDFRAME(enable_wdi)
+
+/*************************************************************
+*  disable_wdi(ints)
+*	Disable the watchdog interrupt
+*/
+FRAME(disable_wdi,sp,0,ra)
+	.set noreorder
+	
+	la	t0,INT_CFG1	# Disable watchdog interrupt in USC320
+	lw	t1,(t0)
+	li	t2,~(WDI_MASK | MODE_TOTEM_POLE)
+	and	t1,t1,t2
+	sw	t1,(t0)
+	
+	la	t0,INT_STAT	# Clear watchdog interrupt status bit
+	li	t1,WDI_MASK
+	sw	t1,(t0)
+	
+	.set reorder
+	j	ra
+	nop
+	.set reorder
+ENDFRAME(disable_wdi)
+
+
+	.data
+
+k1tmp:	.word	0	/* Temporary strage for K1 during interrupt service */
+	
+/*************************************************************
+*
+* Exception handler links, used in PMON exception handler chains
+*/
+	/* Interrupt exception service routine link */
+	.global	_int_esr_link
+_int_esr_link:
+	.word	0
+	.word	hurricane_ISR_Handler
+	
+	/* Break exception service routine link */
+	.global	_brk_esr_link
+_brk_esr_link:
+	.word	0
+	.word	_BRK_Handler
+
+
+	
+
Index: c/src/lib/libbsp/mips/hurricane/startup/ghlinkcmds
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/ghlinkcmds	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/ghlinkcmds	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,19 @@
+#
+#  ghlinkcmds,v 1.2 1998/01/16 16:56:32 joel Exp
+#
+
+-map
+-sec
+{
+  .text 0x80010000  :
+  .data  align(16)  :
+  .rodata :
+  .fini :
+#  .sdata :
+  .symtab :
+  .strtab :
+  .debug :
+#  .sbss :
+  .bss     align(8)  :
+  .init 0xbfc00000 :
+}
Index: c/src/lib/libbsp/mips/hurricane/startup/idtmem.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/idtmem.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/idtmem.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,922 @@
+/*
+
+Based upon IDT provided code with the following release:
+
+This source code has been made available to you by IDT on an AS-IS
+basis. Anyone receiving this source is licensed under IDT copyrights
+to use it in any way he or she deems fit, including copying it,
+modifying it, compiling it, and redistributing it either with or
+without modifications.  No license under IDT patents or patent
+applications is to be implied by the copyright license.
+
+Any user of this software should understand that IDT cannot provide
+technical support for this software and will not be responsible for
+any consequences resulting from the use of this software.
+
+Any person who transfers this source code or any derivative work must
+include the IDT copyright notice, this paragraph, and the preceeding
+two paragraphs in the transferred software.
+
+COPYRIGHT IDT CORPORATION 1996
+LICENSED MATERIAL - PROGRAM PROPERTY OF IDT
+
+  $Id$
+
+*/
+
+/************************************************************************
+**
+**	idtmem.s - memory and cache functions
+**
+**	Copyright 1991 Integrated Device Technology, Inc.
+**	All Rights Reserved
+**
+**************************************************************************/
+
+/*
+ * 950313: Ketan fixed bugs in mfc0/mtc0 hazards, and removed hack
+ * to set mem_size.
+ */
+
+#include <rtems/mips/iregdef.h>
+#include <rtems/mips/idtcpu.h>
+#include <rtems/asm.h>
+
+	.data
+mem_size:
+	.word	0
+dcache_size:
+	.word 	0
+icache_size:
+#if __mips == 1
+	.word	MINCACHE
+#endif
+#if __mips == 3
+	.word	0
+#endif
+
+#if __mips == 3
+	.data
+scache_size:
+	.word 	0
+icache_linesize:
+	.word	0
+dcache_linesize:
+	.word	0
+scache_linesize:
+	.word	0
+#endif
+
+		.text
+
+#if __mips == 1
+#define CONFIGFRM ((2*4)+4)
+
+/*************************************************************************
+**
+** Config_Dcache() -- determine size of Data cache
+**
+**************************************************************************/
+
+FRAME(config_Dcache,sp, CONFIGFRM, ra)
+	.set	noreorder
+	subu	sp,CONFIGFRM
+	sw	ra,CONFIGFRM-4(sp)	/* save return address */
+	sw	s0,4*4(sp)		/* save s0 in first regsave slot */
+	mfc0	s0,C0_SR		/* save SR */
+	nop
+	mtc0	zero,C0_SR		/* disable interrupts */
+	.set	reorder
+	jal	_size_cache		/* returns Data cache size in v0 */
+	sw	v0, dcache_size		/* save it */
+	and 	s0, ~SR_PE		/* do not clear PE */
+	.set	noreorder
+	mtc0	s0,C0_SR		/* restore SR */
+	nop
+	.set	reorder
+	lw	s0, 4*4(sp)		/* restore s0 */
+	lw	ra,CONFIGFRM-4(sp)	/* restore ra */
+	addu	sp,CONFIGFRM		/* pop stack */
+	j	ra
+ENDFRAME(config_Dcache)
+
+/*************************************************************************
+**
+** Config_Icache() -- determine size of Instruction cache
+**		      MUST be run in uncached mode/handled in idt_csu.s
+**
+**************************************************************************/
+
+FRAME(config_Icache,sp, CONFIGFRM, ra)
+	.set	noreorder
+	subu	sp,CONFIGFRM
+	sw	ra,CONFIGFRM-4(sp)	/* save return address */
+	sw	s0,4*4(sp)		/* save s0 in first regsave slot */
+	mfc0	s0,C0_SR		/* save SR */
+	nop
+ 	mtc0	zero, C0_SR		/* disable interrupts */
+	li	v0,SR_SWC		/* swap caches/disable ints  */
+	mtc0	v0,C0_SR
+	nop
+	.set	reorder
+	jal	_size_cache		/* returns instruction cache size */
+	.set	noreorder
+	mtc0	zero,C0_SR		/* swap back caches */
+	nop
+	and	s0,~SR_PE		/* do not inadvertantly clear PE */
+	mtc0	s0,C0_SR		/* restore SR */
+	nop
+	.set	reorder
+	sw	v0, icache_size		/* save it AFTER caches back */
+	lw	s0,4*4(sp)		/* restore s0 */
+	lw	ra,CONFIGFRM-4(sp)	/* restore ra */
+	addu	sp,CONFIGFRM		/* pop stack */
+	j	ra
+ENDFRAME(config_Icache)
+
+/************************************************************************
+**
+** _size_cache()
+** returns cache size in v0
+**
+************************************************************************/
+
+FRAME(_size_cache,sp,0,ra)
+	.set	noreorder
+	mfc0	t0,C0_SR		/* save current sr */
+	nop
+	and	t0,~SR_PE		/* do not inadvertently clear PE */
+	or	v0,t0,SR_ISC		/* isolate cache */
+	mtc0	v0,C0_SR
+	/*
+	 * First check if there is a cache there at all
+	 */
+	move	v0,zero
+	li	v1,0xa5a5a5a5		/* distinctive pattern */
+	sw	v1,K0BASE		/* try to write into cache */
+	lw	t1,K0BASE		/* try to read from cache */
+	nop
+	mfc0	t2,C0_SR
+	nop
+	.set	reorder
+	and	t2,SR_CM
+	bne	t2,zero,3f		/* cache miss, must be no cache */
+	bne	v1,t1,3f		/* data not equal -> no cache */
+	/*
+	 * Clear cache size boundries to known state.
+	 */
+	li	v0,MINCACHE
+1:
+	sw	zero,K0BASE(v0)
+	sll	v0,1
+	ble	v0,MAXCACHE,1b
+
+	li	v0,-1
+	sw	v0,K0BASE(zero)		/* store marker in cache */
+	li	v0,MINCACHE		/* MIN cache size */
+
+2:	lw	v1,K0BASE(v0)		/* Look for marker */
+	bne	v1,zero,3f		/* found marker */
+	sll	v0,1			/* cache size * 2 */
+	ble	v0,MAXCACHE,2b		/* keep looking */
+	move	v0,zero			/* must be no cache */
+	.set	noreorder
+3:	mtc0	t0,C0_SR		/* restore sr */
+	j	ra
+	nop
+ENDFRAME(_size_cache)
+	.set	reorder
+
+#define FLUSHFRM (2*4)
+
+/***************************************************************************
+**
+** flush_Dcache() -  flush entire Data cache
+**
+****************************************************************************/
+FRAME(flush_Dcache,sp,FLUSHFRM,ra)
+	lw      t2, dcache_size
+	.set	noreorder
+	mfc0	t3,C0_SR		/* save SR */
+	nop
+	and	t3,~SR_PE		/* dont inadvertently clear PE */
+	beq	t2,zero,_Dflush_done	/* no D cache, get out! */
+	nop
+	li	v0, SR_ISC		/* isolate cache */
+	mtc0	v0, C0_SR
+	nop
+	.set	reorder
+	li	t0,K0BASE		/* set loop registers  */
+	or	t1,t0,t2
+
+2:	sb	zero,0(t0)
+	sb	zero,4(t0)
+	sb	zero,8(t0)
+	sb	zero,12(t0)
+	sb	zero,16(t0)
+	sb	zero,20(t0)
+	sb	zero,24(t0)
+	addu	t0,32
+	sb	zero,-4(t0)
+	bne	t0,t1,2b
+
+	.set	noreorder
+_Dflush_done:
+	mtc0	t3,C0_SR		/* restore Status Register */
+	.set	reorder
+	j	ra
+ENDFRAME(flush_Dcache)
+
+/***************************************************************************
+**
+** flush_Icache() -  flush entire Instruction cache
+**
+**	NOTE: Icache can only be flushed/cleared when uncached
+**	      Code forces into uncached memory regardless of calling mode
+**
+****************************************************************************/
+FRAME(flush_Icache,sp,FLUSHFRM,ra)
+	lw	t1,icache_size
+	.set	noreorder
+	mfc0	t3,C0_SR		/* save SR */
+	nop
+	la	v0,1f
+	li	v1,K1BASE
+	or	v0,v1
+	j	v0			/* force into non-cached space */
+	nop
+1:
+	and	t3,~SR_PE		/* dont inadvertently clear PE */
+	beq	t1,zero,_Iflush_done	/* no i-cache get out */
+	nop
+	li	v0,SR_ISC|SR_SWC	/* disable intr, isolate and swap */
+	mtc0	v0,C0_SR
+	li	t0,K0BASE
+	.set	reorder
+	or	t1,t0,t1
+
+1:	sb	zero,0(t0)
+	sb	zero,4(t0)
+	sb	zero,8(t0)
+	sb	zero,12(t0)
+	sb	zero,16(t0)
+	sb	zero,20(t0)
+	sb	zero,24(t0)
+	addu	t0,32
+	sb	zero,-4(t0)
+	bne	t0,t1,1b
+	.set	noreorder
+_Iflush_done:
+	mtc0	t3,C0_SR		/* un-isolate, enable interrupts */
+	.set	reorder
+	j	ra
+ENDFRAME(flush_Icache)
+
+/**************************************************************************
+**
+** clear_Dcache(base_addr, byte_count) - flush portion of Data cache
+**
+**      a0 = base address of portion to be cleared
+**      a1 = byte count of length
+**
+***************************************************************************/
+FRAME(clear_Dcache,sp,0,ra)
+
+	lw  	t2, dcache_size		/* Data cache size */
+	.set	noreorder
+	mfc0	t3,C0_SR		/* save SR */
+	nop
+	and	t3,~SR_PE		/* dont inadvertently clear PE */
+	nop
+	nop
+	.set	reorder
+	/*
+	 * flush data cache
+	 */
+
+	.set	noreorder
+	nop
+	li	v0,SR_ISC		/* isolate data cache */
+	mtc0	v0,C0_SR
+	.set	reorder
+	bltu	t2,a1,1f		/* cache is smaller than region */
+	move	t2,a1
+1:	addu	t2,a0			/* ending address + 1 */
+	move	t0,a0
+
+1:	sb	zero,0(t0)
+	sb	zero,4(t0)
+	sb	zero,8(t0)
+	sb	zero,12(t0)
+	sb	zero,16(t0)
+	sb	zero,20(t0)
+	sb	zero,24(t0)
+	addu	t0,32
+	sb	zero,-4(t0)
+	bltu	t0,t2,1b
+
+	.set	noreorder
+	mtc0	t3,C0_SR		/* un-isolate, enable interrupts */
+	nop
+	.set	reorder
+	j	ra
+ENDFRAME(clear_Dcache)
+
+/**************************************************************************
+**
+** clear_Icache(base_addr, byte_count) - flush portion of Instruction cache
+**
+**      a0 = base address of portion to be cleared
+**      a1 = byte count of length
+**
+**	NOTE: Icache can only be flushed/cleared when uncached
+**	      Code forces into uncached memory regardless of calling mode
+**
+***************************************************************************/
+FRAME(clear_Icache,sp,0,ra)
+
+	lw      t1, icache_size		/* Instruction cache size */
+	/*
+	 * flush text cache
+	 */
+	.set	noreorder
+	mfc0	t3,C0_SR		/* save SR */
+	nop
+	la	v0,1f
+	li	v1,K1BASE
+	or	v0,v1
+	j	v0			/* force into non-cached space */
+	nop
+1:
+	and	t3,~SR_PE		/* dont inadvertently clear PE */
+	nop
+	nop
+	li	v0,SR_ISC|SR_SWC	/* disable intr, isolate and swap */
+	mtc0	v0,C0_SR
+	.set	reorder
+	bltu	t1,a1,1f		/* cache is smaller than region */
+	move	t1,a1
+1:	addu	t1,a0			/* ending address + 1 */
+	move	t0,a0
+
+	sb	zero,0(t0)
+	sb	zero,4(t0)
+	sb	zero,8(t0)
+	sb	zero,12(t0)
+	sb	zero,16(t0)
+	sb	zero,20(t0)
+	sb	zero,24(t0)
+	addu	t0,32
+	sb	zero,-4(t0)
+	bltu	t0,t1,1b
+	.set	noreorder
+	mtc0	t3,C0_SR		/* un-isolate, enable interrupts */
+	nop
+	nop
+	nop				/* allow time for caches to swap */
+	.set	reorder
+	j	ra
+ENDFRAME(clear_Icache)
+
+/**************************************************************************
+**
+**  get_mem_conf - get memory configuration
+**
+***************************************************************************/
+
+FRAME(get_mem_conf,sp,0,ra)
+
+	lw	t6, mem_size
+	sw	t6, 0(a0)
+	lw	t7, icache_size
+	sw	t7, 4(a0)
+	lw	t8, dcache_size
+	sw	t8, 8(a0)
+	j	ra
+
+ENDFRAME(get_mem_conf)
+#endif /* __mips == 1 */
+
+#if __mips == 3
+#define LEAF(label)	FRAME(label,sp,0,ra)
+#define XLEAF(label) \
+	.globl label ; \
+label:
+
+/*
+ * cacheop macro to automate cache operations
+ * first some helpers...
+ */
+#define _mincache(size, maxsize) \
+	bltu	size,maxsize,8f ;	\
+	move	size,maxsize ;		\
+8:
+
+#define _align(tmp, minaddr, maxaddr, linesize) \
+	subu	tmp,linesize,1 ;	\
+	not	tmp ;			\
+	and	minaddr,tmp ;		\
+	addu	maxaddr,-1 ;		\
+	and	maxaddr,tmp
+
+/* This is a bit of a hack really because it relies on minaddr=a0 */
+#define _doop1(op1) \
+	cache	op1,0(a0)
+
+#define _doop2(op1, op2) \
+	cache	op1,0(a0) ;		\
+	cache	op2,0(a0)
+
+/* specials for cache initialisation */
+#define _doop1lw1(op1) \
+	cache	op1,0(a0) ;		\
+	lw	zero,0(a0) ;		\
+	cache	op1,0(a0)
+
+#define _doop121(op1,op2) \
+	cache	op1,0(a0) ;		\
+	nop;				\
+	cache	op2,0(a0) ;		\
+	nop;				\
+	cache	op1,0(a0)
+
+#define _oploopn(minaddr, maxaddr, linesize, tag, ops) \
+	.set	noreorder ;		\
+7: 	_doop##tag##ops ;	 	\
+	bne     minaddr,maxaddr,7b ;	\
+	addu   	minaddr,linesize ;	\
+	.set	reorder
+
+/* finally the cache operation macros */
+#define icacheopn(kva, n, cache_size, cache_linesize, tag, ops) \
+	_mincache(n, cache_size);	\
+ 	blez	n,9f ;			\
+	addu	n,kva ;			\
+	_align(t1, kva, n, cache_linesize) ; \
+	_oploopn(kva, n, cache_linesize, tag, ops) ; \
+9:
+
+#define vcacheopn(kva, n, cache_size, cache_linesize, tag, ops) \
+ 	blez	n,9f ;			\
+	addu	n,kva ;			\
+	_align(t1, kva, n, cache_linesize) ; \
+	_oploopn(kva, n, cache_linesize, tag, ops) ; \
+9:
+
+#define icacheop(kva, n, cache_size, cache_linesize, op) \
+	icacheopn(kva, n, cache_size, cache_linesize, 1, (op))
+
+#define vcacheop(kva, n, cache_size, cache_linesize, op) \
+	vcacheopn(kva, n, cache_size, cache_linesize, 1, (op))
+
+	.text
+
+/*
+ * static void _size_cache()    R4000
+ *
+ * Internal routine to determine cache sizes by looking at R4000 config
+ * register.  Sizes are returned in registers, as follows:
+ *	t2	icache size
+ *	t3	dcache size
+ *	t6	scache size
+ *	t4	icache line size
+ *	t5	dcache line size
+ *	t7	scache line size
+ */
+LEAF(_size_cache)
+	mfc0	t0,C0_CONFIG
+
+	and	t1,t0,CFG_ICMASK
+	srl	t1,CFG_ICSHIFT
+	li	t2,0x1000
+	sll	t2,t1
+
+	and	t1,t0,CFG_DCMASK
+	srl	t1,CFG_DCSHIFT
+	li	t3,0x1000
+	sll	t3,t1
+
+	li	t4,32
+	and	t1,t0,CFG_IB
+	bnez	t1,1f
+	li	t4,16
+1:
+
+	li	t5,32
+	and	t1,t0,CFG_DB
+	bnez	t1,1f
+	li	t5,16
+1:
+
+	move	t6,zero			# default to no scache
+	move	t7,zero			#
+
+	and	t1,t0,CFG_C_UNCACHED	# test config register
+	bnez	t1,1f			# no scache if uncached/non-coherent
+
+	li	t6,0x100000		# assume 1Mb scache <<-NOTE
+	and	t1,t0,CFG_SBMASK
+	srl	t1,CFG_SBSHIFT
+	li	t7,16
+	sll	t7,t1
+1:	j	ra
+ENDFRAME(_size_cache)
+
+/*
+ * void config_cache()   R4000
+ *
+ * Work out size of I, D & S caches, assuming they are already initialised.
+ */
+LEAF(config_cache)
+	lw	t0,icache_size
+	bgtz	t0,8f			# already known?
+	move	v0,ra
+	bal	_size_cache
+	move	ra,v0
+
+	sw	t2,icache_size
+	sw	t3,dcache_size
+	sw	t6,scache_size
+	sw	t4,icache_linesize
+	sw	t5,dcache_linesize
+	sw	t7,scache_linesize
+8:	j	ra
+ENDFRAME(config_cache)
+
+/*
+ * void _init_cache()   R4000
+ */
+LEAF(_init_cache)
+	/*
+ 	 * First work out the sizes
+	 */
+	move	v0,ra
+	bal	_size_cache
+	move	ra,v0
+
+	/*
+	 * The caches may be in an indeterminate state,
+	 * so we force good parity into them by doing an
+	 * invalidate, load/fill, invalidate for each line.
+	 */
+
+	/* disable all i/u and cache exceptions */
+	mfc0	v0,C0_SR
+	and	v1,v0,~SR_IE
+	or	v1,SR_DE
+	mtc0	v1,C0_SR
+
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	/* assume bottom of RAM will generate good parity for the cache */
+	li	a0,PHYS_TO_K0(0)
+	move	a2,t2		# icache_size
+	move	a3,t4		# icache_linesize
+	move	a1,a2
+	icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill_I))
+
+	li	a0,PHYS_TO_K0(0)
+	move	a2,t3		# dcache_size
+	move	a3,t5		# dcache_linesize
+	move	a1,a2
+	icacheopn(a0,a1,a2,a3,1lw1,(Index_Store_Tag_D))
+
+	/* assume unified I & D in scache <<-NOTE */
+	blez	t6,1f
+	li	a0,PHYS_TO_K0(0)
+	move	a2,t6
+	move	a3,t7
+	move	a1,a2
+	icacheopn(a0,a1,a2,a3,1lw1,(Index_Store_Tag_SD))
+
+1:	mtc0	v0,C0_SR
+	j	ra
+ENDFRAME(_init_cache)
+
+/*
+ * void flush_cache (void)   R4000
+ *
+ * Flush and invalidate all caches
+ */
+LEAF(flush_cache)
+	/* secondary cacheops do all the work if present */
+	lw	a2,scache_size
+	blez	a2,1f
+	lw	a3,scache_linesize
+	li	a0,PHYS_TO_K0(0)
+	move	a1,a2
+	icacheop(a0,a1,a2,a3,Index_Writeback_Inv_SD)
+	b	2f
+
+1:
+	lw	a2,icache_size
+	blez	a2,2f
+	lw	a3,icache_linesize
+	li	a0,PHYS_TO_K0(0)
+	move	a1,a2
+	icacheop(a0,a1,a2,a3,Index_Invalidate_I)
+
+	lw	a2,dcache_size
+	lw	a3,dcache_linesize
+	li	a0,PHYS_TO_K0(0)
+	move	a1,a2
+	icacheop(a0,a1,a2,a3,Index_Writeback_Inv_D)
+
+2:	j	ra
+ENDFRAME(flush_cache)
+
+/*
+ * void flush_cache_nowrite (void)   R4000
+ *
+ * Invalidate all caches
+ */
+LEAF(flush_cache_nowrite)
+	mfc0	v0,C0_SR
+	and	v1,v0,~SR_IE
+	mtc0	v1,C0_SR
+
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	lw	a2,icache_size
+	blez	a2,2f
+	lw	a3,icache_linesize
+	li	a0,PHYS_TO_K0(0)
+	move	a1,a2
+	icacheop(a0,a1,a2,a3,Index_Invalidate_I)
+
+	lw	a2,dcache_size
+	lw	a3,dcache_linesize
+	li	a0,PHYS_TO_K0(0)
+	move	a1,a2
+	icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+	lw	a2,scache_size
+	blez	a2,2f
+	lw	a3,scache_linesize
+	li	a0,PHYS_TO_K0(0)
+	move	a1,a2
+	icacheop(a0,a1,a2,a3,Index_Store_Tag_SD)
+
+2:	mtc0	v0,C0_SR
+	j	ra
+ENDFRAME(flush_cache_nowrite)
+
+/*
+ * void clean_cache (unsigned kva, size_t n)   R4000
+ *
+ * Writeback and invalidate address range in all caches
+ */
+LEAF(clean_cache)
+XLEAF(clear_cache)
+
+	/* secondary cacheops do all the work (if fitted) */
+	lw	a2,scache_size
+	blez	a2,1f
+	lw	a3,scache_linesize
+	vcacheop(a0,a1,a2,a3,Hit_Writeback_Inv_SD)
+	b	2f
+
+1:	lw	a2,icache_size
+	blez	a2,2f
+	lw	a3,icache_linesize
+	/* save kva & n for subsequent loop */
+	move	t8,a0
+	move	t9,a1
+	vcacheop(a0,a1,a2,a3,Hit_Invalidate_I)
+
+	lw	a2,dcache_size
+	lw	a3,dcache_linesize
+	/* restore kva & n */
+	move	a0,t8
+	move	a1,t9
+	vcacheop(a0,a1,a2,a3,Hit_Writeback_Inv_D)
+
+2:	j	ra
+ENDFRAME(clean_cache)
+
+/*
+ * void clean_dcache (unsigned kva, size_t n)   R4000
+ *
+ * Writeback and invalidate address range in primary data cache
+ */
+LEAF(clean_dcache)
+	lw	a2,dcache_size
+	blez	a2,2f
+	lw	a3,dcache_linesize
+
+	vcacheop(a0,a1,a2,a3,Hit_Writeback_Inv_D)
+
+2:	j	ra
+ENDFRAME(clean_dcache)
+
+/*
+ * void clean_dcache_indexed (unsigned kva, size_t n)   R4000
+ *
+ * Writeback and invalidate indexed range in primary data cache
+ */
+LEAF(clean_dcache_indexed)
+	lw	a2,dcache_size
+	blez	a2,2f
+	lw	a3,dcache_linesize
+
+#ifdef CPU_ORION
+	srl	a2,1			# do one set (half cache) at a time
+	move	t8,a0			# save kva & n
+	move	t9,a1
+	icacheop(a0,a1,a2,a3,Index_Writeback_Inv_D)
+
+	addu	a0,t8,a2		# do next set
+	move	a1,t9			# restore n
+#endif
+	icacheop(a0,a1,a2,a3,Index_Writeback_Inv_D)
+
+2:	j	ra
+ENDFRAME(clean_dcache_indexed)
+
+/*
+ * void clean_dcache_nowrite (unsigned kva, size_t n)   R4000
+ *
+ * Invalidate an address range in primary data cache
+ */
+LEAF(clean_dcache_nowrite)
+	lw	a2,dcache_size
+	blez	a2,2f
+	lw	a3,dcache_linesize
+
+	vcacheop(a0,a1,a2,a3,Hit_Invalidate_D)
+
+2:	j	ra
+ENDFRAME(clean_dcache_nowrite)
+
+/*
+ * void clean_dcache_nowrite_indexed (unsigned kva, size_t n)   R4000
+ *
+ * Invalidate indexed range in primary data cache
+ */
+LEAF(clean_dcache_nowrite_indexed)
+	mfc0	v0,C0_SR
+	and	v1,v0,~SR_IE
+	mtc0	v1,C0_SR
+
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	lw	a2,dcache_size
+	blez	a2,2f
+	lw	a3,dcache_linesize
+
+#ifdef CPU_ORION
+	srl	a2,1			# do one set (half cache) at a time
+	move	t8,a0			# save kva & n
+	move	t9,a1
+	icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+	addu	a0,t8,a2		# do next set
+	move	a1,t9			# restore n
+#endif
+	icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+2:	mtc0	v0,C0_SR
+	j	ra
+ENDFRAME(clean_dcache_nowrite_indexed)
+
+/*
+ * void clean_icache (unsigned kva, size_t n)   R4000
+ *
+ * Invalidate address range in primary instruction cache
+ */
+LEAF(clean_icache)
+	lw	a2,icache_size
+	blez	a2,2f
+	lw	a3,icache_linesize
+
+	vcacheop(a0,a1,a2,a3,Hit_Invalidate_I)
+
+2:	j	ra
+ENDFRAME(clean_icache)
+
+/*
+ * void clean_icache_indexed (unsigned kva, size_t n)   R4000
+ *
+ * Invalidate indexed range in primary instruction cache
+ */
+LEAF(clean_icache_indexed)
+	lw	a2,icache_size
+	blez	a2,2f
+	lw	a3,icache_linesize
+
+#ifdef CPU_ORION
+	srl	a2,1			# do one set (half cache) at a time
+	move	t8,a0			# save kva & n
+	move	t9,a1
+	icacheop(a0,a1,a2,a3,Index_Invalidate_I)
+
+	addu	a0,t8,a2		# do next set
+	move	a1,t9			# restore n
+#endif
+	icacheop(a0,a1,a2,a3,Index_Invalidate_I)
+
+2:	j	ra
+ENDFRAME(clean_icache_indexed)
+
+/*
+ * void clean_scache (unsigned kva, size_t n)   R4000
+ *
+ * Writeback and invalidate address range in secondary cache
+ */
+LEAF(clean_scache)
+	lw	a2,scache_size
+	blez	a2,2f
+	lw	a3,scache_linesize
+	vcacheop(a0,a1,a2,a3,Hit_Writeback_Inv_SD)
+
+2:	j	ra
+ENDFRAME(clean_scache)
+
+/*
+ * void clean_scache_indexed (unsigned kva, size_t n)   R4000
+ *
+ * Writeback and invalidate indexed range in secondary cache
+ */
+LEAF(clean_scache_indexed)
+	lw	a2,scache_size
+	blez	a2,2f
+	lw	a3,scache_linesize
+
+	icacheop(a0,a1,a2,a3,Index_Writeback_Inv_SD)
+
+2:	j	ra
+ENDFRAME(clean_scache_indexed)
+
+/*
+ * void clean_scache_nowrite (unsigned kva, size_t n)   R4000
+ *
+ * Invalidate an address range in secondary cache
+ */
+LEAF(clean_scache_nowrite)
+	lw	a2,scache_size
+	blez	a2,2f
+	lw	a3,scache_linesize
+
+	vcacheop(a0,a1,a2,a3,Hit_Invalidate_SD)
+
+2:	j	ra
+ENDFRAME(clean_scache_nowrite)
+
+/*
+ * void clean_scache_nowrite_indexed (unsigned kva, size_t n)   R4000
+ *
+ * Invalidate indexed range in secondary cache
+ */
+LEAF(clean_scache_nowrite_indexed)
+	mfc0	v0,C0_SR
+	and	v1,v0,~SR_IE
+	mtc0	v1,C0_SR
+
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	lw	a2,scache_size
+	blez	a2,2f
+	lw	a3,scache_linesize
+
+	icacheop(a0,a1,a2,a3,Index_Store_Tag_SD)
+
+2:	mtc0	v0,C0_SR
+	j	ra
+ENDFRAME(clean_scache_nowrite_indexed)
+
+/**************************************************************************
+**
+**  get_mem_conf - get memory configuration  R4000
+**
+***************************************************************************/
+
+FRAME(get_mem_conf,sp,0,ra)
+
+	lw	t6, mem_size
+	sw	t6, 0(a0)
+	lw	t7, icache_size
+	sw	t7, 4(a0)
+	lw	t8, dcache_size
+	sw	t8, 8(a0)
+	lw	t7, scache_size
+	sw	t7, 12(a0)
+	j	ra
+
+ENDFRAME(get_mem_conf)
+
+#endif /* __mips == 3 */
+
+/*
+ * void set_mem_size (mem_size)
+ *
+ * config_memory()'s memory size gets written into mem_size here.
+ * Now we don't need to call config_cache() with memory size - New to IDTC6.0
+ */
+FRAME(set_memory_size,sp,0,ra)
+	sw	a0, mem_size
+	j	ra
+ENDFRAME(set_memory_size)
Index: c/src/lib/libbsp/mips/hurricane/startup/idttlb.S
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/idttlb.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/idttlb.S	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,390 @@
+/*
+
+Based upon IDT provided code with the following release:
+
+This source code has been made available to you by IDT on an AS-IS
+basis. Anyone receiving this source is licensed under IDT copyrights
+to use it in any way he or she deems fit, including copying it,
+modifying it, compiling it, and redistributing it either with or
+without modifications.  No license under IDT patents or patent
+applications is to be implied by the copyright license.
+
+Any user of this software should understand that IDT cannot provide
+technical support for this software and will not be responsible for
+any consequences resulting from the use of this software.
+
+Any person who transfers this source code or any derivative work must
+include the IDT copyright notice, this paragraph, and the preceeding
+two paragraphs in the transferred software.
+
+COPYRIGHT IDT CORPORATION 1996
+LICENSED MATERIAL - PROGRAM PROPERTY OF IDT
+
+  idttlb.S,v 1.3 2000/10/24 21:50:37 joel Exp
+*/
+
+
+/*
+**	idttlb.s - fetch the registers associated with and the contents
+**		   of the tlb.
+**
+*/
+/* 950308: Ketan patched a few tlb functions that would not have worked.*/
+#include <rtems/mips/iregdef.h>
+#include <rtems/mips/idtcpu.h>
+#include <rtems/asm.h>
+
+
+	.text
+
+#if __mips == 1
+/*
+** ret_tlblo -- returns the 'entrylo' contents for the TLB
+**	'c' callable - as ret_tlblo(index) - where index is the
+**	tlb entry to return the lo value for - if called from assembly
+**	language then index should be in register a0.
+*/
+FRAME(ret_tlblo,sp,0,ra)
+	.set	noreorder
+	mfc0	t0,C0_SR		# save sr
+	nop
+	and	t0,~SR_PE		# dont inadvertantly clear PE
+	mtc0	zero,C0_SR		# clear interrupts
+	mfc0	t1,C0_TLBHI		# save pid
+	sll	a0,TLBINX_INXSHIFT	# position index
+	mtc0	a0,C0_INX		# write to index register
+	nop
+	tlbr				# put tlb entry in entrylo and hi
+	nop
+	mfc0	v0,C0_TLBLO		# get the requested entry lo
+	mtc0	t1,C0_TLBHI		# restore pid
+	mtc0	t0,C0_SR		# restore status register
+	j	ra
+	nop
+	.set	reorder
+ENDFRAME(ret_tlblo)
+#endif
+#if __mips == 3
+/*
+** ret_tlblo[01] -- returns the 'entrylo' contents for the TLB
+**	'c' callable - as ret_tlblo(index) - where index is the
+**	tlb entry to return the lo value for - if called from assembly
+**	language then index should be in register a0.
+*/
+FRAME(ret_tlblo0,sp,0,ra)
+	mfc0	t0,C0_SR		# save sr
+	mtc0	zero,C0_SR		# clear interrupts
+	mfc0	t1,C0_TLBHI		# save pid
+	mtc0	a0,C0_INX		# write to index register
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	tlbr				# put tlb entry in entrylo and hi
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	mfc0	v0,C0_TLBLO0		# get the requested entry lo
+	mtc0	t1,C0_TLBHI		# restore pid
+	mtc0	t0,C0_SR		# restore status register
+	j	ra
+ENDFRAME(ret_tlblo0)
+
+FRAME(ret_tlblo1,sp,0,ra)
+	mfc0	t0,C0_SR		# save sr
+	mtc0	zero,C0_SR		# clear interrupts
+	mfc0	t1,C0_TLBHI		# save pid
+	mtc0	a0,C0_INX		# write to index register
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	tlbr				# put tlb entry in entrylo and hi
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	mfc0	v0,C0_TLBLO1		# get the requested entry lo
+	mtc0	t1,C0_TLBHI		# restore pid
+	mtc0	t0,C0_SR		# restore status register
+	j	ra
+ENDFRAME(ret_tlblo1)
+
+/*
+** ret_pagemask(index) -- return pagemask contents of tlb entry "index"
+*/
+FRAME(ret_pagemask,sp,0,ra)
+	mfc0	t0,C0_SR		# save sr
+	mtc0	zero,C0_SR		# disable interrupts
+	mfc0	t1,C0_TLBHI		# save current pid
+	mtc0	a0,C0_INX		# drop it in C0 register
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	tlbr				# read entry to entry hi/lo
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	mfc0	v0,C0_PAGEMASK		# to return value
+	mtc0	t1,C0_TLBHI		# restore current pid
+	mtc0	t0,C0_SR		# restore sr
+	j	ra
+ENDFRAME(ret_pagemask)
+
+/*
+** ret_tlbwired(void) -- return wired register
+*/
+FRAME(ret_tlbwired,sp,0,ra)
+	mfc0	v0,C0_WIRED
+	j	ra
+ENDFRAME(ret_tlbwired)
+#endif
+
+/*
+** ret_tlbhi -- return the tlb entry high content for tlb entry
+**			index
+*/
+FRAME(ret_tlbhi,sp,0,ra)
+#if __mips == 1
+	.set	noreorder
+	mfc0	t0,C0_SR		# save sr
+	nop
+	and	t0,~SR_PE
+	mtc0	zero,C0_SR		# disable interrupts
+	mfc0	t1,C0_TLBHI		# save current pid
+	sll	a0,TLBINX_INXSHIFT	# position index
+	mtc0	a0,C0_INX		# drop it in C0 register
+	nop
+	tlbr				# read entry to entry hi/lo
+	nop
+	mfc0	v0,C0_TLBHI		# to return value
+	mtc0	t1,C0_TLBHI		# restore current pid
+	mtc0	t0,C0_SR		# restore sr
+	j	ra
+	nop
+	.set	reorder
+#endif
+#if __mips == 3
+	mfc0	t0,C0_SR		# save sr
+	mtc0	zero,C0_SR		# disable interrupts
+	mfc0	t1,C0_TLBHI		# save current pid
+	mtc0	a0,C0_INX		# drop it in C0 register
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	tlbr				# read entry to entry hi/lo0/lo1/mask
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	mfc0	v0,C0_TLBHI		# to return value
+	mtc0	t1,C0_TLBHI		# restore current pid
+	mtc0	t0,C0_SR		# restore sr
+	j	ra
+#endif
+ENDFRAME(ret_tlbhi)
+
+/*
+** ret_tlbpid() -- return tlb pid contained in the current entry hi
+*/
+FRAME(ret_tlbpid,sp,0,ra)
+#if __mips == 1
+	.set	noreorder
+	mfc0	v0,C0_TLBHI		# fetch tlb high 
+	nop
+	and	v0,TLBHI_PIDMASK	# isolate and position
+	srl	v0,TLBHI_PIDSHIFT
+	j	ra
+	nop
+	.set	reorder
+#endif
+#if __mips == 3
+	mfc0	v0,C0_TLBHI	# to return value
+	nop
+	and	v0,TLBHI_PIDMASK
+	j	ra
+#endif
+ENDFRAME(ret_tlbpid)
+
+/*
+** tlbprobe(address, pid) -- probe the tlb to see if address is currently
+**				mapped
+**	a0 = vpn  - virtual page numbers are 0=0 1=0x1000, 2=0x2000...
+**			virtual page numbers for the r3000 are in
+**			entry hi bits 31-12
+**	a1 = pid  - this is a process id ranging from 0 to 63
+**		    this process id is shifted left 6 bits and or'ed into
+**		    the entry hi register
+**	returns an index value (0-63) if successful -1 -f not
+*/
+FRAME(tlbprobe,sp,0,ra)
+#if __mips == 1
+	.set	noreorder
+	mfc0	t0,C0_SR		/* fetch status reg */
+	and	a0,TLBHI_VPNMASK	/* isolate just the vpn */
+	and	t0,~SR_PE		/* don't inadvertantly clear pe */
+	mtc0	zero,C0_SR 
+	mfc0	t1,C0_TLBHI	
+	sll	a1,TLBHI_PIDSHIFT	/* possition the pid */
+	and	a1,TLBHI_PIDMASK
+	or	a0,a1			/* build entry hi value */
+	mtc0	a0,C0_TLBHI
+	nop
+	tlbp				/* do the probe */
+	nop
+	mfc0	v1,C0_INX
+	li	v0,-1
+	bltz	v1,1f
+	nop
+	sra	v0,v1,TLBINX_INXSHIFT	/* get index positioned for return */
+1:
+	mtc0	t1,C0_TLBHI		/* restore tlb hi */
+	mtc0	t0,C0_SR		/* restore the status reg */
+	j	ra
+	nop
+	.set	reorder
+#endif
+#if __mips == 3
+	mfc0	t0,C0_SR		# save sr
+	mtc0	zero,C0_SR		# disable interrupts
+	mfc0	t1,C0_TLBHI		# save current pid
+	and	a0,TLBHI_VPN2MASK	# construct tlbhi for probe
+	and	a1,TLBHI_PIDMASK
+	or	a0,a1
+	mtc0	a0,C0_TLBHI
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	tlbp				# probe entry to entry hi/lo0/lo1/mask
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	mfc0	v1,C0_INX
+	li	v0,-1
+	bltz	v1,1f
+	move	v0,v1
+1:	mtc0	t1,C0_TLBHI		# restore current pid
+	mtc0	t0,C0_SR		# restore sr
+	j	ra
+#endif
+ENDFRAME(tlbprobe)
+
+/*
+** resettlb(index) Invalidate the  TLB entry specified by index
+*/
+FRAME(resettlb,sp,0,ra)
+#if __mips == 1
+	.set	noreorder
+	mfc0	t0,C0_TLBHI		# fetch the current hi 
+	mfc0	v0,C0_SR		# fetch the status reg.
+	li	t2,K0BASE&TLBHI_VPNMASK
+	and	v0,~SR_PE		# dont inadvertantly clear PE
+	mtc0	zero,C0_SR
+	mtc0	t2,C0_TLBHI		# set up tlbhi
+	mtc0	zero,C0_TLBLO
+	sll	a0,TLBINX_INXSHIFT
+	mtc0	a0,C0_INX
+	nop
+	tlbwi				# do actual invalidate
+	nop
+	mtc0	t0,C0_TLBHI
+	mtc0	v0,C0_SR
+	j	ra
+	nop
+	.set	reorder
+#endif
+#if __mips == 3
+	li	t2,K0BASE&TLBHI_VPN2MASK
+	mfc0	t0,C0_TLBHI		# save current TLBHI
+	mfc0	v0,C0_SR		# save SR and disable interrupts
+	mtc0	zero,C0_SR
+	mtc0	t2,C0_TLBHI		# invalidate entry
+	mtc0	zero,C0_TLBLO0
+	mtc0	zero,C0_TLBLO1
+	mtc0	a0,C0_INX
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	tlbwi
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	mtc0	t0,C0_TLBHI
+	mtc0	v0,C0_SR
+	j	ra
+#endif
+ENDFRAME(resettlb)
+
+#if __mips == 1
+/*
+** Setup TLB entry
+**
+** map_tlb(index, tlbhi, phypage)
+** 	a0  =  TLB entry index
+**	a1  =  virtual page number and PID
+**	a2  =  physical page
+*/
+FRAME(map_tlb,sp,0,ra)
+	.set	noreorder
+	sll	a0,TLBINX_INXSHIFT
+	mfc0	v0,C0_SR		# fetch the current status
+	mfc0	a3,C0_TLBHI		# save the current hi
+	and	v0,~SR_PE		# dont inadvertantly clear parity
+
+	mtc0	zero,C0_SR
+	mtc0	a1,C0_TLBHI		# set the hi entry
+	mtc0	a2,C0_TLBLO		# set the lo entry 
+	mtc0	a0,C0_INX		# load the index
+	nop
+	tlbwi				# put the hi/lo in tlb entry indexed
+	nop
+	mtc0	a3,C0_TLBHI		# put back the tlb hi reg 
+	mtc0	v0,C0_SR		# restore the status register 
+	j	ra
+	nop
+	.set	reorder
+ENDFRAME(map_tlb)
+#endif
+#if __mips == 3
+/*
+** Setup R4000 TLB entry
+**
+** map_tlb4000(mask_index, tlbhi, pte_even, pte_odd)
+** 	a0  =  TLB entry index and page mask
+**	a1  =  virtual page number and PID
+**      a2  =  pte -- contents of even pte
+**      a3  =  pte -- contents of odd pte
+*/
+FRAME(map_tlb4000,sp,0,ra)
+	and	t2,a0,TLBPGMASK_MASK
+	and	a0,TLBINX_INXMASK
+	mfc0	t1,C0_TLBHI		# save current TLBPID
+	mfc0	v0,C0_SR		# save SR and disable interrupts
+	mtc0	zero,C0_SR
+	mtc0	t2,C0_PAGEMASK		# set 
+	mtc0	a1,C0_TLBHI		# set VPN and TLBPID
+	mtc0	a2,C0_TLBLO0		# set PPN and access bits
+	mtc0	a3,C0_TLBLO1		# set PPN and access bits
+	mtc0	a0,C0_INX		# set INDEX to wired entry
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	tlbwi				# drop it in
+	.set noreorder
+	nop; nop; nop; nop; nop; nop; nop; nop
+	.set reorder
+	mtc0	t1,C0_TLBHI		# restore TLBPID
+	mtc0	v0,C0_SR		# restore SR
+	j	ra
+ENDFRAME(map_tlb4000)
+#endif
+
+
+/*
+** Set current TLBPID. This assumes PID is positioned correctly in reg.
+**			a0.
+*/
+FRAME(set_tlbpid,sp,0,ra)
+	.set	noreorder
+	mtc0	a0,C0_TLBHI
+	j	ra
+	nop
+	.set	reorder
+ENDFRAME(set_tlbpid)
+
Index: c/src/lib/libbsp/mips/hurricane/startup/inittlb.c
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/inittlb.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/inittlb.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,16 @@
+/*
+ *  inittlb.c,v 1.2 1999/03/31 23:21:19 joel Exp
+ */
+
+#include <rtems/mips/idtcpu.h>
+
+extern void resettlb( int i );
+
+void init_tlb(void)
+{
+  int i;
+
+        for (i = 0; i < N_TLB_ENTRIES; i++ )
+                resettlb(i);
+}
+
Index: c/src/lib/libbsp/mips/hurricane/startup/linkcmds
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/linkcmds	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/linkcmds	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,162 @@
+/*
+ *   linkcmds,v 1.6 2003/01/20 20:20:10 joel Exp
+ */
+
+/*
+ * Declare some sizes.
+ */
+_RamBase = DEFINED(_RamBase) ? _RamBase : 0x80000000;
+_RamSize = DEFINED(_RamSize) ? _RamSize : 4M;
+_StackSize = DEFINED(_StackSize) ? _StackSize : 0x1000;
+
+SECTIONS
+{
+  /* 0x80000000 - 0x8001FFFF used by PMON (with 0x80010000 - 0x8001FFFF as heap for symbol storage)
+	0x80020000 - 0x8002FFFF reserved for shared memory
+	0x80030000 beginning of text (code) section
+   */
+  .text 0x80030000  :
+  {
+    _ftext = . ;
+    eprol = .;
+    *(.text)
+    *(.text.*)
+    *(.gnu.linkonce.t*)
+    *(.mips16.fn.*)
+    *(.mips16.call.*)
+    PROVIDE (__runtime_reloc_start = .);
+    *(.rel.sdata)
+    PROVIDE (__runtime_reloc_stop = .);
+
+      /*
+       * Special FreeBSD sysctl sections.
+       */
+      . = ALIGN (16);
+      __start_set_sysctl_set = .;
+      *(set_sysctl_*);
+      __stop_set_sysctl_set = ABSOLUTE(.);
+      *(set_domain_*);
+      *(set_pseudo_*);
+
+      *(.gcc_except_table)
+      *(.eh_frame_hdr)
+      *(.eh_frame)
+  }
+
+  .init :
+  {
+	KEEP(*crti.o(.init))
+	KEEP(*(.init))
+	KEEP(*crtn.o(.init))
+  }
+
+  .fini :
+  {
+	KEEP(*crti.o(.fini))
+	KEEP(*(.fini))
+	KEEP(*crtn.o(.fini))
+  }
+
+  .ctors    :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+
+    KEEP (*crtbegin.o(.ctors))
+
+    /* We don't want to include the .ctor section from
+       from the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  }
+
+  .dtors    :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+
+    etext  =  .;
+    _etext  =  .;
+  }
+
+  .rdata : {
+    *(.rdata)
+    *(.rodata)
+    *(.rodata.*)
+    *(.gnu.linkonce.r*)
+  }
+   _fdata = ALIGN(16);
+
+  .data : {
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d*)
+    SORT(CONSTRUCTORS)
+  }
+  . = ALIGN(8);
+
+  .jcr : {
+	KEEP (*(.jcr))
+  }
+
+  _gp = ALIGN(16) + 0x8000;
+  __global = _gp;
+
+  .sdata : {
+    *(.sdata)
+    *(.sdata.*)
+    *(.gnu.linkonce.s*)
+  }
+  .lit8 : {
+    *(.lit8)
+  }
+  .lit4 : {
+    *(.lit4)
+  }
+
+   edata  =  .;
+   _edata  =  .;
+   _fbss = .;
+
+  .sbss : {
+    *(.sbss)
+    *(.scommon)
+  }
+  .bss : {
+    _bss_start = . ;
+    *(.bss)
+    *(.reginfo)
+    *(COMMON)
+    . = ALIGN (64);
+    _stack_limit = .;
+    . += _StackSize;
+    __stack = .;
+    _stack_init = .;
+     end = .;
+    _end = .;
+  }
+
+
+  /* Debug sections.  These should never be loadable, but they must have
+     zero addresses for the debuggers to work correctly.  */
+  .line			0 : { *(.line)			}
+  .debug		0 : { *(.debug)			}
+  .debug_sfnames	0 : { *(.debug_sfnames)		}
+  .debug_srcinfo	0 : { *(.debug_srcinfo)		}
+  .debug_macinfo	0 : { *(.debug_macinfo)		}
+  .debug_pubnames	0 : { *(.debug_pubnames)	}
+  .debug_aranges	0 : { *(.debug_aranges)		}
+}
Index: c/src/lib/libbsp/mips/hurricane/startup/setvec.c
===================================================================
--- c/src/lib/libbsp/mips/hurricane/startup/setvec.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/startup/setvec.c	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,52 @@
+/*  set_vector
+ *
+ *  This routine installs an interrupt vector on the target Board/CPU.
+ *  This routine is allowed to be as board dependent as necessary.
+ *
+ *  INPUT:
+ *    handler - interrupt handler entry point
+ *    vector  - vector number
+ *    type    - 0 indicates raw hardware connect
+ *              1 indicates RTEMS interrupt connect
+ *
+ *  RETURNS:
+ *    address of previous interrupt handler
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  setvec.c,v 1.8.6.1 2003/09/04 18:44:52 joel Exp
+ */
+
+/*
+ *  Rather than deleting this, it is commented out to (hopefully) help
+ *  the submitter send updates.
+ *
+ *  static char _sccsid[] = "@(#)setvec.c 04/25/96     1.2\n";
+ */
+
+
+#include <rtems.h>
+#include <bsp.h>
+
+mips_isr_entry set_vector(                    /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+)
+{
+  mips_isr_entry previous_isr;
+
+  if ( type )
+    rtems_interrupt_catch( handler, vector, (rtems_isr_entry *) &previous_isr );
+  else {
+    /* XXX: install non-RTEMS ISR as "raw" interupt */
+    rtems_interrupt_catch( handler, vector, (rtems_isr_entry *) &previous_isr );
+  }
+  return previous_isr;
+}
+
Index: c/src/lib/libbsp/mips/hurricane/times
===================================================================
--- c/src/lib/libbsp/mips/hurricane/times	(revision 72837683458ae43e7616c5af6764238167c16f2b)
+++ c/src/lib/libbsp/mips/hurricane/times	(revision 72837683458ae43e7616c5af6764238167c16f2b)
@@ -0,0 +1,200 @@
+#
+#  Timing Test Suite Results for the NO_BSP
+#
+#  NOTE: This is just a template.  The times are irrelevant since this BSP
+#        can only be compiled -- not executed.
+#
+#  times,v 1.2 1998/01/16 16:56:32 joel Exp
+#
+# @(#)times        08/01/96     1.4
+
+NOTE:  To obtain the execution time in microseconds, divide the number of
+       cycles by the clock speed.  For example, if rtems_semaphore create
+       is reported to be 1164 cycles, then at 66 Mhz it takes 17.64
+       microseconds or 8.75 microseconds at 133 Mhz.
+
+Board: Algorithmics P4000i 
+CPU: IDT 4650
+Clock Speed: 100MHz
+Memory Configuration: SRAM, DRAM, cache, etc
+Wait States:
+
+Times Reported in: cycles
+Timer Source: on-CPU cycle counter
+
+Column A:RTEMS compiled with 64 bit pointers and 64 bit unsigned32 types
+Column B:RTEMS compiled with 32 bit pointers and 32 bit unsigned32 types
+
+#                          DESCRIPTION                                 A    B
+== =================================================================  ==== ====
+ 1 rtems_semaphore_create                                              788  759
+   rtems_semaphore_delete                                              903  945
+   rtems_semaphore_obtain: available                                   119  119
+   rtems_semaphore_obtain: not available -- NO_WAIT                    118  118
+   rtems_semaphore_release: no waiting tasks                           127  127
+
+ 2 rtems_semaphore_obtain: not available -- caller blocks              842  840
+
+ 3 rtems_semaphore_release: task readied -- preempts caller            777  751
+
+ 4 rtems_task_restart: blocked task -- preempts caller                1611 1595
+   rtems_task_restart: ready task -- preempts caller                  1253 1395
+   rtems_semaphore_release: task readied -- returns to caller          365  345
+   rtems_task_create                                                   798  797
+   rtems_task_start                                                    464  460
+   rtems_task_restart: suspended task -- returns to caller             517  517
+   rtems_task_delete: suspended task                                   529  595
+   rtems_task_restart: ready task -- returns to caller                 527  525
+   rtems_task_restart: blocked task -- returns to caller               707  684
+   rtems_task_delete: blocked task                                     609  675
+
+ 5 rtems_task_suspend: calling task                                    549  549
+   rtems_task_resume: task readied -- preempts caller                  702  699
+
+ 6 rtems_task_restart: calling task                                    291  291
+   rtems_task_suspend: returns to caller                               195  194
+   rtems_task_resume: task readied -- returns to caller                198  198
+   rtems_task_delete: ready task                                       734  736
+
+ 7 rtems_task_restart: suspended task -- preempts caller              1049  990
+
+ 8 rtems_task_set_priority: obtain current priority                     94   94
+   rtems_task_set_priority: returns to caller                          418  355
+   rtems_task_mode: obtain current mode                                 44   43
+   rtems_task_mode: no reschedule                                        0   49
+   rtems_task_mode: reschedule -- returns to caller                      0  232 
+   rtems_task_mode: reschedule -- preempts caller                        0  687
+   rtems_task_set_note                                                   0  101
+   rtems_task_get_note                                                   0  103
+   rtems_clock_set                                                       0  237
+   rtems_clock_get                                                       0   16
+
+ 9 rtems_message_queue_create                                         3583 3432
+   rtems_message_queue_send: no waiting tasks                          252  252
+   rtems_message_queue_urgent: no waiting tasks                        252  252
+   rtems_message_queue_receive: available                              207  207
+   rtems_message_queue_flush: no messages flushed                       95   96
+   rtems_message_queue_flush: messages flushed                         110  110
+   rtems_message_queue_delete                                         1044 1111
+
+10 rtems_message_queue_receive: not available -- NO_WAIT               132  131
+   rtems_message_queue_receive: not available -- caller blocks         884  892
+
+11 rtems_message_queue_send: task readied -- preempts caller           397  817 
+
+12 rtems_message_queue_send: task readied -- returns to caller         397  397
+
+13 rtems_message_queue_urgent: task readied -- preempts caller         816  817
+
+14 rtems_message_queue_urgent: task readied -- returns to caller       397  398
+
+15 rtems_event_receive: obtain current events                            5    5
+   rtems_event_receive: not available -- NO_WAIT                        99   99
+   rtems_event_receive: not available -- caller blocks                 689  689
+   rtems_event_send: no task readied                                   123  123
+   rtems_event_receive: available                                      326  349
+   rtems_event_send: task readied -- returns to caller                 333  429
+
+16 rtems_event_send: task readied -- preempts caller                   843  838
+
+17 rtems_task_set_priority: preempts caller                           1002  991
+
+18 rtems_task_delete: calling task                                    1171 1157
+
+19 rtems_signal_catch                                                    0 1306
+   rtems_signal_send: returns to caller                                  0 1019
+   rtems_signal_send: signal to self                                     0  496
+   exit ASR overhead: returns to calling task                            0  120
+   exit ASR overhead: returns to preempting task                         0   73
+
+20 rtems_partition_create                                             1293 1306
+   rtems_region_create                                                1010 1019
+   rtems_partition_get_buffer: available                               481  496
+   rtems_partition_get_buffer: not available                           120  120
+   rtems_partition_return_buffer                                       587  460
+   rtems_partition_delete                                              379  320
+   rtems_region_get_segment: available                                 179  179
+   rtems_region_get_segment: not available -- NO_WAIT                  349  293
+   rtems_region_return_segment: no waiting tasks                       335  322
+   rtems_region_get_segment: not available -- caller blocks           1603 1496
+   rtems_region_return_segment: task readied -- preempts caller       1616 1533
+   rtems_region_return_segment: task readied -- returns to caller      940  939
+   rtems_region_delete                                                 301  348
+   rtems_io_initialize                                                   9   10
+   rtems_io_open                                                         6    6
+   rtems_io_close                                                        6    6
+   rtems_io_read                                                         6    6
+   rtems_io_write                                                        6    5
+   rtems_io_control                                                      6    6
+
+21 rtems_task_ident                                                   1057 1058
+   rtems_message_queue_ident                                           963  963
+   rtems_semaphore_ident                                              1137 1136
+   rtems_partition_ident                                               962  961
+   rtems_region_ident                                                  923  924
+   rtems_port_ident                                                    918  917
+   rtems_timer_ident                                                   942  941
+   rtems_rate_monotonic_ident                                          924  925
+
+22 rtems_message_queue_broadcast: task readied -- returns to caller   1084 1095
+   rtems_message_queue_broadcast: no waiting tasks                     147  148
+   rtems_message_queue_broadcast: task readied -- preempts caller     1305 1268
+
+23 rtems_timer_create                                                  202  201
+   rtems_timer_fire_after: inactive                                    261  261
+   rtems_timer_fire_after: active                                      271  269
+   rtems_timer_cancel: active                                          142  141
+   rtems_timer_cancel: inactive                                        122  124
+   rtems_timer_reset: inactive                                         222  222
+   rtems_timer_reset: active                                           246  245
+   rtems_timer_fire_when: inactive                                     312  311
+   rtems_timer_fire_when: active                                       358  358
+   rtems_timer_delete: active                                          263  263
+   rtems_timer_delete: inactive                                        247  247
+   rtems_task_wake_when                                                833  831
+
+24 rtems_task_wake_after: yield -- returns to caller                    99   98
+   rtems_task_wake_after: yields -- preempts caller                    479  478
+
+25 rtems_clock_tick                                                    313  318
+
+26 _ISR_Disable                                                         64   57
+   _ISR_Flash                                                           51   36
+   _ISR_Enable                                                          31   18
+   _Thread_Disable_dispatch                                             53   37
+   _Thread_Enable_dispatch                                             260  233
+   _Thread_Set_state                                                   446  463
+   _Thread_Disptach (NO FP)                                            839  801
+   context switch: no floating point contexts                          673  653
+   context switch: self                                                156  162
+   context switch: to another task                                      84   70
+   context switch: restore 1st FP task                                1030 1013
+   fp context switch: save idle, restore idle                          969  948
+   fp context switch: save idle, restore initialized                   275  267
+   fp context switch: save initialized, restore initialized            319  292
+   _Thread_Resume                                                      512  480
+   _Thread_Unblock                                                     121  139
+   _Thread_Ready                                                       199  203
+   _Thread_Get                                                          27   27
+   _Semaphore_Get                                                       20   21
+   _Thread_Get: invalid id                                               5    5
+
+27 interrupt entry overhead: returns to interrupted task                 0    0
+   interrupt exit overhead: returns to interrupted task                 27   41
+   interrupt entry overhead: returns to nested interrupt                 0    0
+   interrupt exit overhead: returns to nested interrupt                  0    0
+   interrupt entry overhead: returns to preempting task                  0    0
+   interrupt exit overhead: returns to preempting task                   0    0
+
+28 rtems_port_create                                                   574  560
+   rtems_port_external_to_internal                                      87   87
+   rtems_port_internal_to_external                                      86   86
+   rtems_port_delete                                                   395  353
+
+29 rtems_rate_monotonic_create                                         621  633
+   rtems_rate_monotonic_period: initiate period -- returns to caller   773  694
+   rtems_rate_monotonic_period: obtain status                          295  284
+   rtems_rate_monotonic_cancel                                         408  451
+   rtems_rate_monotonic_delete: inactive                               453  471
+   rtems_rate_monotonic_delete: active                                 332  336
+   rtems_rate_monotonic_period: conclude periods -- caller blocks      664  686
