Index: c/src/lib/libbsp/powerpc/motorola_powerpc/ChangeLog
===================================================================
--- c/src/lib/libbsp/powerpc/motorola_powerpc/ChangeLog	(revision d45540a28f05cd44e437e667d93a066d4b2d80b8)
+++ c/src/lib/libbsp/powerpc/motorola_powerpc/ChangeLog	(revision 4ef2fd43b790f097cbf06cee8c0f3926452c42f1)
@@ -1,2 +1,9 @@
+2005-11-03	straumanatslacdotstanforddotedu
+
+	* Makefile.am, motorola_powerpc/Makefile.am, mvme5500/Makefile.am,
+	mvme5500/start/preload.S, mvme5500/startup/bspstart.c,
+	shared/startup/bspstart.c: moved linkcmds to shared area for other
+	BSPs to use
+
 2005-10-20	Eric Norum <norume@aps.anl.gov>
 
Index: src/lib/libbsp/powerpc/motorola_powerpc/startup/linkcmds
===================================================================
--- c/src/lib/libbsp/powerpc/motorola_powerpc/startup/linkcmds	(revision d45540a28f05cd44e437e667d93a066d4b2d80b8)
+++ 	(revision )
@@ -1,264 +1,0 @@
-OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc",
-              "elf32-powerpc")
-OUTPUT_ARCH(powerpc)
-ENTRY(_start)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-PROVIDE (__stack = 0);
-MEMORY {
-	VECTORS	: ORIGIN = 0x0 ,  LENGTH = 0x3000
-	CODE : ORIGIN = 0x3000 , LENGTH = 0x400000 
-}
-SECTIONS
-{
-  .entry_point_section :
-  {
-	*(.entry_point_section)
-  } > VECTORS
-
-  /*
-   * This section is used only if NO_DYNAMIC_EXCEPTION_VECTOR_INSTALL
-   * is defined in vectors/vectors.S
-   */
-  .vectors :
-  {
-    *(.vectors)
-  } > VECTORS
-
-  /* Read-only sections, merged into text segment: */
-  .interp   : { *(.interp) }	> CODE
-  .hash           : { *(.hash)          }	> CODE
-  .dynsym         : { *(.dynsym)                }	> CODE
-  .dynstr         : { *(.dynstr)                }	> CODE
-  .gnu.version   : { *(.gnu.version)      }	> CODE
-  .gnu.version_d   : { *(.gnu.version_d)  }	> CODE
-  .gnu.version_r   : { *(.gnu.version_r)  }	> CODE
-  .rela.text     :
-    { *(.rela.text) *(.rela.gnu.linkonce.t*) }	> CODE
-  .rela.data     :
-    { *(.rela.data) *(.rela.gnu.linkonce.d*) }	> CODE
-  .rela.rodata   :
-    { *(.rela.rodata*) *(.rela.gnu.linkonce.r*) }	> CODE
-  .rela.got       : { *(.rela.got)      }	> CODE
-  .rela.got1      : { *(.rela.got1)     }	> CODE
-  .rela.got2      : { *(.rela.got2)     }	> CODE
-  .rela.ctors     : { *(.rela.ctors)    }	> CODE
-  .rela.dtors     : { *(.rela.dtors)    }	> CODE
-  .rela.init      : { *(.rela.init)     }	> CODE
-  .rela.fini      : { *(.rela.fini)     }	> CODE
-  .rela.bss       : { *(.rela.bss)      }	> CODE
-  .rela.plt       : { *(.rela.plt)      }	> CODE
-  .rela.sdata     : { *(.rela.sdata)    }	> CODE
-  .rela.sbss      : { *(.rela.sbss)     }	> CODE
-  .rela.sdata2    : { *(.rela.sdata2)   }	> CODE
-  .rela.sbss2     : { *(.rela.sbss2)    }	> CODE
-
-  .init		  : { KEEP(*(.init))		} > CODE
-
-  .text      :	
-  {
-    *(.text)	
-
-    /*
-     * Special FreeBSD sysctl sections.
-     */
-    . = ALIGN (16);
-    __start_set_sysctl_set = .;
-    *(set_sysctl_*);
-    __stop_set_sysctl_set = ABSOLUTE(.);
-    *(set_domain_*);
-    *(set_pseudo_*);
-
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-  }  > CODE
-
-  .fini		  : { _fini = .; KEEP(*(.fini))	} > CODE
-
-  .rodata         : { *(.rodata*) *(.gnu.linkonce.r*) }	> CODE
-  .rodata1        : { *(.rodata1) }	> CODE
-
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  . = ALIGN(0x10000) + (. & (0x10000 - 1));
-  /* Ensure the __preinit_array_start label is properly aligned.  We
-     could instead move the label definition inside the section, but
-     the linker would then create the section even if it turns out to
-     be empty, which isn't pretty.  */
-  . = ALIGN(32 / 8);
-  PROVIDE (__preinit_array_start = .);
-  .preinit_array     : { *(.preinit_array) } >CODE
-  PROVIDE (__preinit_array_end = .);
-  PROVIDE (__init_array_start = .);
-  .init_array     : { *(.init_array) } >CODE
-  PROVIDE (__init_array_end = .);
-  PROVIDE (__fini_array_start = .);
-  .fini_array     : { *(.fini_array) } >CODE
-  PROVIDE (__fini_array_end = .);
-
-_SDA2_BASE_ = __SDATA2_START__ + 0x8000;
-  .sdata2         : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) } >CODE
-  .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) } >CODE
-  .eh_frame	  : { *.(eh_frame)		} >CODE
-
-  /* NOTE: if the BSP uses page tables, the correctness of
-   *       '_etext' (and __DATA_START__) is CRUCIAL - otherwise,
-   *       an invalid mapping may result!!!
-   */
-  _etext = .;
-  PROVIDE (etext = .);
-
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  It would
-     be more correct to do this:
-       . = ALIGN(0x40000) + (ALIGN(8) & (0x40000 - 1));
-     The current expression does not correctly handle the case of a
-     text segment ending precisely at the end of a page; it causes the
-     data segment to skip a page.  The above expression does not have
-     this problem, but it will currently (2/95) cause BFD to allocate
-     a single segment, combining both text and data, for this case.
-     This will prevent the text segment from being shared among
-     multiple executions of the program; I think that is more
-     important than losing a page of the virtual address space (note
-     that no actual memory is lost; the page which is skipped can not
-     be referenced).  */
-  . = ALIGN(0x1000);
- .data ALIGN(0x1000) :
-  {
-   /* NOTE: if the BSP uses page tables, the correctness of
-    *       '__DATA_START__' (and _etext) is CRUCIAL - otherwise,
-    *       an invalid mapping may result!!!
-    */
-	PROVIDE(__DATA_START__ = ABSOLUTE(.) );
-    *(.data .data.* .gnu.linkonce.d*)	
-    SORT(CONSTRUCTORS)
-  } > CODE
-  .data1   : { *(.data1) }	> CODE
-  PROVIDE (__EXCEPT_START__ = .);
-  .gcc_except_table   : { *(.gcc_except_table) } > CODE
-  PROVIDE (__EXCEPT_END__ = .);
-  .got1           : { *(.got1) }	> CODE
-  /* Put .ctors and .dtors next to the .got2 section, so that the pointers
-     get relocated with -mrelocatable. Also put in the .fixup pointers.
-     The current compiler no longer needs this, but keep it around for 2.7.2  */
-                PROVIDE (_GOT2_START_ = .);
-  .got2           :  { *(.got2) }	> CODE
-  .dynamic        : { *(.dynamic) }	> CODE
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } > CODE
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } > CODE
-
-
-                PROVIDE (_FIXUP_START_ = .);
-  .fixup          : { *(.fixup) }	> CODE
-                PROVIDE (_FIXUP_END_ = .);
-                PROVIDE (_GOT2_END_ = .);
-                PROVIDE (_GOT_START_ = .);
-
-  .got            : { *(.got) }	> CODE
-  .got.plt        : { *(.got.plt) }	> CODE
-
-                PROVIDE (_GOT_END_ = .);
-
-  .jcr            : { KEEP (*(.jcr)) } > CODE
-
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-_SDA_BASE_ = __SDATA_START__ + 0x8000;
-  .sdata	  : { *(.sdata) *(.gnu.linkonce.s.*)	} >CODE
-  _edata  =  .;
-  PROVIDE (edata = .);
-  .sbss      :
-  {
-    PROVIDE (__sbss_start = .);
-    *(.dynsbss)
-    *(.sbss .sbss.* .gnu.linkonce.sb.*)
-    *(.scommon)
-    PROVIDE (__sbss_end = .);
-  } > CODE
-  .plt   : { *(.plt) }	> CODE
-  .bss       :
-  {
-   PROVIDE (__bss_start = .);
-   *(.dynbss)
-   *(.bss .bss.* .gnu.linkonce.b.*)
-   *(COMMON)
-  . = ALIGN(16);
-  } > CODE
-  . = ALIGN(16);
-  _end = . ;
-  __rtems_end = . ;
-  PROVIDE (end = .);
-  /DISCARD/ : 
-  {
-    *(.comment)
-  }
-
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-}
