Changeset 45269dc in rtems


Ignore:
Timestamp:
Oct 11, 1999, 3:34:26 PM (22 years ago)
Author:
Joel Sherrill <joel.sherrill@…>
Branches:
4.10, 4.11, 4.8, 4.9, 5, master
Children:
87fad5c
Parents:
8ab8646
Message:

Patch from Ralf Corsepius <corsepiu@…> to move librdbg
to its own top level package.

Files:
1 deleted
13 edited

Legend:

Unmodified
Added
Removed
  • aclocal/check-rdbg.m4

    r8ab8646 r45269dc  
    1010  rtems_cv_HAS_RDBG,
    1111  [
    12     if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/librdbg/${RTEMS_CPU}/${$1}"; then
     12    if test -d "$srcdir/${RTEMS_TOPdir}/c/src/librdbg/src/${RTEMS_CPU}/${$1}"; then
    1313      rtems_cv_HAS_RDBG="yes" ;
    1414    else
  • c/src/configure.in

    r8ab8646 r45269dc  
    1010RTEMS_ENABLE_CXX
    1111RTEMS_ENABLE_NETWORKING
     12RTEMS_ENABLE_RDBG
    1213
    1314RTEMS_CANONICAL_TARGET_CPU
     
    2728AC_CONFIG_SUBDIRS(exec)
    2829AC_CONFIG_SUBDIRS(lib)
     30
    2931if test "$HAS_NETWORKING" = "yes"; then
    30 cfg_subdirs="libnetworking librpc"
     32  cfg_subdirs="libnetworking librpc"
     33  if test "$RTEMS_HAS_RDBG" = "yes"; then
     34    RTEMS_CHECK_RDBG(RTEMS_BSP)
     35  fi
    3136fi
     37
     38if test "$HAS_RDBG" = "yes"; then
     39  cfg_subdirs="$cfg_subdirs librdbg"
     40fi
     41
    3242if test "$RTEMS_HAS_CPLUSPLUS" = "yes"; then
    33 cfg_subdirs="$cfg_subdirs librtems++";
     43  cfg_subdirs="$cfg_subdirs librtems++";
    3444fi
     45
    3546AC_CONFIG_SUBDIRS($cfg_subdirs)
    3647AC_CONFIG_SUBDIRS(wrapup)
  • c/src/exec/libcsupport/Makefile.am

    r8ab8646 r45269dc  
    66ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
    77
    8 if HAS_RDBG
    9 LIBRDBG = librdbg
    10 endif
    11 
    128if HAS_LIBCHIP
    139LIBCHIP = libchip
     
    1511
    1612SUBDIRS = start include libmisc libc libcpu libbsp \
    17     $(LIBRDBG) $(LIBCHIP) $(LIBHWAPI)
     13    $(LIBCHIP) $(LIBHWAPI)
    1814
    1915include $(top_srcdir)/../../../automake/subdirs.am
  • c/src/lib/Makefile.am

    r8ab8646 r45269dc  
    66ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
    77
    8 if HAS_RDBG
    9 LIBRDBG = librdbg
    10 endif
    11 
    128if HAS_LIBCHIP
    139LIBCHIP = libchip
     
    1511
    1612SUBDIRS = start include libmisc libc libcpu libbsp \
    17     $(LIBRDBG) $(LIBCHIP) $(LIBHWAPI)
     13    $(LIBCHIP) $(LIBHWAPI)
    1814
    1915include $(top_srcdir)/../../../automake/subdirs.am
  • c/src/lib/configure.in

    r8ab8646 r45269dc  
    4444AC_CONFIG_SUBDIRS(libbsp)
    4545
    46 # If the TCP/IP stack is enabled, then find all TCP/IP Makefiles
    47 if test "$HAS_NETWORKING" = "yes"; then
    48   if test "$RTEMS_HAS_RDBG" = "yes"; then
    49     RTEMS_CHECK_RDBG(RTEMS_BSP)
    50   fi
    51 fi
    52 
    53 if test "$HAS_RDBG" = "yes"; then
    54   cfg_subdirs="$cfg_subdirs librdbg"
    55 fi
    56 
    57 # If the HWAPI is enabled, the find the HWAPI Makefiles
    5846RTEMS_ENABLE_HWAPI
    5947if test "$RTEMS_HAS_HWAPI" = "yes"; then
     
    7866AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
    7967AM_CONDITIONAL(HAS_LIBCHIP,test "$RTEMS_CPU" != "unix")
    80 AM_CONDITIONAL(HAS_RDBG,test "$HAS_RDBG" = "yes")
    8168
    8269AC_CONFIG_SUBDIRS(libmisc)
     
    9481include/motorola/Makefile
    9582include/zilog/Makefile
    96 include/rdbg/Makefile
    97 include/rdbg/i386/Makefile
    98 include/rdbg/powerpc/Makefile
    9983libc/Makefile
    10084start/Makefile)
  • c/src/lib/include/Makefile.am

    r8ab8646 r45269dc  
    2323profile-am: $(TMPINSTALL_FILES)
    2424
    25 SUBDIRS = sys motorola zilog rdbg
     25SUBDIRS = sys motorola zilog
    2626
    2727include $(top_srcdir)/../../../automake/subdirs.am
  • c/src/librdbg/src/Makefile.in

    r8ab8646 r45269dc  
    1 #
    2 #  $Id$
    3 #
    4 
    5 @SET_MAKE@
     1# Makefile.in generated automatically by automake 1.4a from Makefile.am
     2
     3# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
     4# This Makefile.in is free software; the Free Software Foundation
     5# gives unlimited permission to copy and/or distribute it,
     6# with or without modifications, as long as this notice is preserved.
     7
     8# This program is distributed in the hope that it will be useful,
     9# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
     10# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
     11# PARTICULAR PURPOSE.
     12
     13
     14
     15
     16SHELL = @SHELL@
     17
    618srcdir = @srcdir@
    719top_srcdir = @top_srcdir@
    8 top_builddir = .
    9 
     20VPATH = @srcdir@
     21prefix = @prefix@
     22exec_prefix = @exec_prefix@
     23
     24bindir = @bindir@
     25sbindir = @sbindir@
     26libexecdir = @libexecdir@
     27datadir = @datadir@
     28sysconfdir = @sysconfdir@
     29sharedstatedir = @sharedstatedir@
     30localstatedir = @localstatedir@
     31libdir = @libdir@
     32infodir = @infodir@
     33mandir = @mandir@
     34includedir = @includedir@
     35oldincludedir = /usr/include
     36
     37DESTDIR =
     38
     39pkgdatadir = $(datadir)/@PACKAGE@
     40pkglibdir = $(libdir)/@PACKAGE@
     41pkgincludedir = $(includedir)/@PACKAGE@
     42
     43top_builddir = ..
     44
     45ACLOCAL = @ACLOCAL@
     46AUTOCONF = @AUTOCONF@
     47AUTOMAKE = @AUTOMAKE@
     48AUTOHEADER = @AUTOHEADER@
     49
     50INSTALL = @INSTALL@
     51INSTALL_PROGRAM = @INSTALL_PROGRAM@
     52INSTALL_DATA = @INSTALL_DATA@
     53INSTALL_SCRIPT = @INSTALL_SCRIPT@
     54INSTALL_STRIP_FLAG =
     55transform = @program_transform_name@
     56
     57NORMAL_INSTALL = :
     58PRE_INSTALL = :
     59POST_INSTALL = :
     60NORMAL_UNINSTALL = :
     61PRE_UNINSTALL = :
     62POST_UNINSTALL = :
     63build_alias = @build_alias@
     64build_triplet = @build@
     65host_alias = @host_alias@
     66host_triplet = @host@
     67target_alias = @target_alias@
     68target_triplet = @target@
     69AWK = @AWK@
     70CC = @CC@
     71CC_FOR_TARGET = @CC_FOR_TARGET@
     72CPP = @CPP@
     73GCCSED = @GCCSED@
     74HAS_MP = @HAS_MP@
     75HAS_NETWORKING = @HAS_NETWORKING@
     76HAS_POSIX_API = @HAS_POSIX_API@
     77HAS_RDBG = @HAS_RDBG@
     78INSTALL_CHANGE = @INSTALL_CHANGE@
     79MAINT = @MAINT@
     80MAKEINFO = @MAKEINFO@
     81PACKAGE = @PACKAGE@
     82PACKHEX = @PACKHEX@
     83PROJECT_INCLUDE = @PROJECT_INCLUDE@
     84PROJECT_ROOT = @PROJECT_ROOT@
     85RPCGEN = @RPCGEN@
     86RTEMS_BSP = @RTEMS_BSP@
     87RTEMS_CPU = @RTEMS_CPU@
     88RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@
     89RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
     90RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@
     91RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@
     92RTEMS_HOST = @RTEMS_HOST@
     93RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
    1094RTEMS_ROOT = @RTEMS_ROOT@
    11 PROJECT_ROOT = @PROJECT_ROOT@
    12 
    13 VPATH = @srcdir@
    14 
    15 include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
    16 include $(RTEMS_ROOT)/make/directory.cfg
    17 
    18 INSTALL_CHANGE = @INSTALL_CHANGE@
    19 
    20 SUB_DIRS = $(RTEMS_CPU)
    21 
    22 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     95RTEMS_TOPdir = @RTEMS_TOPdir@
     96VERSION = @VERSION@
     97
     98AUTOMAKE_OPTIONS = foreign 1.4
     99ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
     100
     101SUBDIRS = $(RTEMS_CPU)
     102
     103EXTRA_DIST =  _servtgt.c awk.svc excep.c ptrace.c rdbg.c remdeb.x servbkpt.c servcon.c servrpc.c servtgt.c servtsp.c servutil.c
     104
     105mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
     106CONFIG_CLEAN_FILES =
     107DIST_COMMON =  Makefile.am Makefile.in
     108
     109
     110DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
     111
     112TAR = gtar
     113GZIP_ENV = --best
     114all: all-redirect
     115.SUFFIXES:
     116$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/subdirs.am $(top_srcdir)/../../../automake/local.am
     117        cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile
     118
     119Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
    23120        cd $(top_builddir) \
    24          && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
     121          && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
     122
     123
     124# This directory's subdirectories are mostly independent; you can cd
     125# into them and run `make' without going through this Makefile.
     126# To change the values of `make' variables: instead of editing Makefiles,
     127# (1) if the variable is set in `config.status', edit `config.status'
     128#     (which will cause the Makefiles to be regenerated when you run `make');
     129# (2) otherwise, pass the desired values on the `make' command line.
     130
     131@SET_MAKE@
     132
     133all-recursive install-data-recursive install-exec-recursive \
     134installdirs-recursive install-recursive uninstall-recursive  \
     135check-recursive installcheck-recursive info-recursive dvi-recursive:
     136        @set fnord $(MAKEFLAGS); amf=$$2; \
     137        dot_seen=no; \
     138        target=`echo $@ | sed s/-recursive//`; \
     139        list='$(SUBDIRS)'; for subdir in $$list; do \
     140          echo "Making $$target in $$subdir"; \
     141          if test "$$subdir" = "."; then \
     142            dot_seen=yes; \
     143            local_target="$$target-am"; \
     144          else \
     145            local_target="$$target"; \
     146          fi; \
     147          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     148           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     149        done; \
     150        if test "$$dot_seen" = "no"; then \
     151          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
     152        fi; test -z "$$fail"
     153
     154mostlyclean-recursive clean-recursive distclean-recursive \
     155maintainer-clean-recursive:
     156        @set fnord $(MAKEFLAGS); amf=$$2; \
     157        dot_seen=no; \
     158        rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
     159          rev="$$subdir $$rev"; \
     160          test "$$subdir" = "." && dot_seen=yes; \
     161        done; \
     162        test "$$dot_seen" = "no" && rev=". $$rev"; \
     163        target=`echo $@ | sed s/-recursive//`; \
     164        for subdir in $$rev; do \
     165          echo "Making $$target in $$subdir"; \
     166          if test "$$subdir" = "."; then \
     167            local_target="$$target-am"; \
     168          else \
     169            local_target="$$target"; \
     170          fi; \
     171          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     172           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     173        done && test -z "$$fail"
     174tags-recursive:
     175        list='$(SUBDIRS)'; for subdir in $$list; do \
     176          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
     177        done
     178
     179tags: TAGS
     180
     181ID: $(HEADERS) $(SOURCES) $(LISP)
     182        list='$(SOURCES) $(HEADERS)'; \
     183        unique=`for i in $$list; do echo $$i; done | \
     184          awk '    { files[$$0] = 1; } \
     185               END { for (i in files) print i; }'`; \
     186        here=`pwd` && cd $(srcdir) \
     187          && mkid -f$$here/ID $$unique $(LISP)
     188
     189TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
     190        tags=; \
     191        here=`pwd`; \
     192        list='$(SUBDIRS)'; for subdir in $$list; do \
     193   if test "$$subdir" = .; then :; else \
     194            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
     195   fi; \
     196        done; \
     197        list='$(SOURCES) $(HEADERS)'; \
     198        unique=`for i in $$list; do echo $$i; done | \
     199          awk '    { files[$$0] = 1; } \
     200               END { for (i in files) print i; }'`; \
     201        test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
     202          || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
     203
     204mostlyclean-tags:
     205
     206clean-tags:
     207
     208distclean-tags:
     209        -rm -f TAGS ID
     210
     211maintainer-clean-tags:
     212
     213distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
     214
     215subdir = src
     216
     217distdir: $(DISTFILES)
     218        here=`cd $(top_builddir) && pwd`; \
     219        top_distdir=`cd $(top_distdir) && pwd`; \
     220        distdir=`cd $(distdir) && pwd`; \
     221        cd $(top_srcdir) \
     222          && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign src/Makefile
     223        @for file in $(DISTFILES); do \
     224          d=$(srcdir); \
     225          if test -d $$d/$$file; then \
     226            cp -pr $$d/$$file $(distdir)/$$file; \
     227          else \
     228            test -f $(distdir)/$$file \
     229            || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
     230            || cp -p $$d/$$file $(distdir)/$$file || :; \
     231          fi; \
     232        done
     233        for subdir in $(SUBDIRS); do \
     234          if test "$$subdir" = .; then :; else \
     235            test -d $(distdir)/$$subdir \
     236            || mkdir $(distdir)/$$subdir \
     237            || exit 1; \
     238            chmod 777 $(distdir)/$$subdir; \
     239            (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
     240              || exit 1; \
     241          fi; \
     242        done
     243info-am:
     244info: info-recursive
     245dvi-am:
     246dvi: dvi-recursive
     247check-am: all-am
     248check: check-recursive
     249installcheck-am:
     250installcheck: installcheck-recursive
     251install-exec-am:
     252install-exec: install-exec-recursive
     253
     254install-data-am:
     255install-data: install-data-recursive
     256
     257install-am: all-am
     258        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
     259install: install-recursive
     260uninstall-am:
     261uninstall: uninstall-recursive
     262all-am: Makefile
     263all-redirect: all-recursive
     264install-strip:
     265        $(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
     266installdirs: installdirs-recursive
     267installdirs-am:
     268
     269
     270mostlyclean-generic:
     271
     272clean-generic:
     273
     274distclean-generic:
     275        -rm -f Makefile $(CONFIG_CLEAN_FILES)
     276        -rm -f config.cache config.log stamp-h stamp-h[0-9]*
     277
     278maintainer-clean-generic:
     279mostlyclean-am:  mostlyclean-tags mostlyclean-generic
     280
     281mostlyclean: mostlyclean-recursive
     282
     283clean-am:  clean-tags clean-generic mostlyclean-am
     284
     285clean: clean-recursive
     286
     287distclean-am:  distclean-tags distclean-generic clean-am
     288
     289distclean: distclean-recursive
     290
     291maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
     292                distclean-am
     293        @echo "This command is intended for maintainers to use;"
     294        @echo "it deletes files that may require special tools to rebuild."
     295
     296maintainer-clean: maintainer-clean-recursive
     297
     298.PHONY: install-data-recursive uninstall-data-recursive \
     299install-exec-recursive uninstall-exec-recursive installdirs-recursive \
     300uninstalldirs-recursive all-recursive check-recursive \
     301installcheck-recursive info-recursive dvi-recursive \
     302mostlyclean-recursive distclean-recursive clean-recursive \
     303maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
     304distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
     305dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
     306install-exec install-data-am install-data install-am install \
     307uninstall-am uninstall all-redirect all-am all installdirs-am \
     308installdirs mostlyclean-generic distclean-generic clean-generic \
     309maintainer-clean-generic clean mostlyclean distclean maintainer-clean
     310
     311
     312depend-recursive \
     313preinstall-recursive \
     314debug-recursive \
     315profile-recursive:
     316        @set fnord $(MAKEFLAGS); amf=$$2; \
     317        dot_seen=no; \
     318        target=`echo $@ | sed s/-recursive//`; \
     319        list='$(SUBDIRS)'; for subdir in $$list; do \
     320          echo "Making $$target in $$subdir"; \
     321          if test "$$subdir" = "."; then \
     322            dot_seen=yes; \
     323            local_target="$$target-am"; \
     324          else \
     325            local_target="$$target"; \
     326          fi; \
     327          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     328           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     329        done; \
     330        if test "$$dot_seen" = "no"; then \
     331          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
     332        fi; test -z "$$fail"
     333
     334debug: debug-recursive
     335.PHONY: debug-recursive
     336
     337profile: profile-recursive
     338.PHONY: profile-recursive
     339
     340preinstall: preinstall-recursive
     341.PHONY: preinstall-recursive
     342
     343depend: depend-recursive
     344.PHONY: depend-recursive
     345
     346debug-am:
     347debug: debug-am
     348.PHONY: debug debug-am
     349
     350profile-am:
     351profile: profile-am
     352.PHONY: profile profile-am
     353
     354preinstall-am: $(TMPINSTALL_FILES)
     355preinstall: preinstall-am
     356.PHONY: preinstall preinstall-am
     357
     358depend-am:
     359depend: depend-am
     360.PHONY: depend depend-am
     361
     362# Tell versions [3.59,3.63) of GNU make to not export all variables.
     363# Otherwise a system limit (for SysV at least) may be exceeded.
     364.NOEXPORT:
  • c/src/librdbg/src/i386/Makefile.in

    r8ab8646 r45269dc  
    1 #
    2 #  $Id$
    3 #
    4 
    5 @SET_MAKE@
     1# Makefile.in generated automatically by automake 1.4a from Makefile.am
     2
     3# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
     4# This Makefile.in is free software; the Free Software Foundation
     5# gives unlimited permission to copy and/or distribute it,
     6# with or without modifications, as long as this notice is preserved.
     7
     8# This program is distributed in the hope that it will be useful,
     9# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
     10# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
     11# PARTICULAR PURPOSE.
     12
     13
     14
     15
     16SHELL = @SHELL@
     17
    618srcdir = @srcdir@
    719top_srcdir = @top_srcdir@
    8 top_builddir = ..
    9 subdir = i386
    10 
     20VPATH = @srcdir@
     21prefix = @prefix@
     22exec_prefix = @exec_prefix@
     23
     24bindir = @bindir@
     25sbindir = @sbindir@
     26libexecdir = @libexecdir@
     27datadir = @datadir@
     28sysconfdir = @sysconfdir@
     29sharedstatedir = @sharedstatedir@
     30localstatedir = @localstatedir@
     31libdir = @libdir@
     32infodir = @infodir@
     33mandir = @mandir@
     34includedir = @includedir@
     35oldincludedir = /usr/include
     36
     37DESTDIR =
     38
     39pkgdatadir = $(datadir)/@PACKAGE@
     40pkglibdir = $(libdir)/@PACKAGE@
     41pkgincludedir = $(includedir)/@PACKAGE@
     42
     43top_builddir = ../..
     44
     45ACLOCAL = @ACLOCAL@
     46AUTOCONF = @AUTOCONF@
     47AUTOMAKE = @AUTOMAKE@
     48AUTOHEADER = @AUTOHEADER@
     49
     50INSTALL = @INSTALL@
     51INSTALL_PROGRAM = @INSTALL_PROGRAM@
     52INSTALL_DATA = @INSTALL_DATA@
     53INSTALL_SCRIPT = @INSTALL_SCRIPT@
     54INSTALL_STRIP_FLAG =
     55transform = @program_transform_name@
     56
     57NORMAL_INSTALL = :
     58PRE_INSTALL = :
     59POST_INSTALL = :
     60NORMAL_UNINSTALL = :
     61PRE_UNINSTALL = :
     62POST_UNINSTALL = :
     63build_alias = @build_alias@
     64build_triplet = @build@
     65host_alias = @host_alias@
     66host_triplet = @host@
     67target_alias = @target_alias@
     68target_triplet = @target@
     69AWK = @AWK@
     70CC = @CC@
     71CC_FOR_TARGET = @CC_FOR_TARGET@
     72CPP = @CPP@
     73GCCSED = @GCCSED@
     74HAS_MP = @HAS_MP@
     75HAS_NETWORKING = @HAS_NETWORKING@
     76HAS_POSIX_API = @HAS_POSIX_API@
     77HAS_RDBG = @HAS_RDBG@
     78INSTALL_CHANGE = @INSTALL_CHANGE@
     79MAINT = @MAINT@
     80MAKEINFO = @MAKEINFO@
     81PACKAGE = @PACKAGE@
     82PACKHEX = @PACKHEX@
     83PROJECT_INCLUDE = @PROJECT_INCLUDE@
     84PROJECT_ROOT = @PROJECT_ROOT@
     85RPCGEN = @RPCGEN@
     86RTEMS_BSP = @RTEMS_BSP@
     87RTEMS_CPU = @RTEMS_CPU@
     88RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@
     89RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
     90RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@
     91RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@
     92RTEMS_HOST = @RTEMS_HOST@
     93RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
    1194RTEMS_ROOT = @RTEMS_ROOT@
    12 PROJECT_ROOT = @PROJECT_ROOT@
    13 
    14 VPATH = @srcdir@
    15 
    16 include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
    17 include $(RTEMS_ROOT)/make/directory.cfg
    18 
    19 INSTALL_CHANGE = @INSTALL_CHANGE@
    20 
    21 SUB_DIRS = @RTEMS_BSP@
    22 
    23 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     95RTEMS_TOPdir = @RTEMS_TOPdir@
     96VERSION = @VERSION@
     97
     98AUTOMAKE_OPTIONS = foreign 1.4
     99ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
     100
     101SUBDIRS = pc386
     102
     103EXTRA_DIST =  excep_f.c rdbg_cpu_asm.S excep.c rdbg_f.c
     104
     105mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
     106CONFIG_CLEAN_FILES =
     107DIST_COMMON =  Makefile.am Makefile.in
     108
     109
     110DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
     111
     112TAR = gtar
     113GZIP_ENV = --best
     114all: all-redirect
     115.SUFFIXES:
     116$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/subdirs.am $(top_srcdir)/../../../automake/local.am
     117        cd $(top_srcdir) && $(AUTOMAKE) --foreign src/i386/Makefile
     118
     119Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
    24120        cd $(top_builddir) \
    25          && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
     121          && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
     122
     123
     124# This directory's subdirectories are mostly independent; you can cd
     125# into them and run `make' without going through this Makefile.
     126# To change the values of `make' variables: instead of editing Makefiles,
     127# (1) if the variable is set in `config.status', edit `config.status'
     128#     (which will cause the Makefiles to be regenerated when you run `make');
     129# (2) otherwise, pass the desired values on the `make' command line.
     130
     131@SET_MAKE@
     132
     133all-recursive install-data-recursive install-exec-recursive \
     134installdirs-recursive install-recursive uninstall-recursive  \
     135check-recursive installcheck-recursive info-recursive dvi-recursive:
     136        @set fnord $(MAKEFLAGS); amf=$$2; \
     137        dot_seen=no; \
     138        target=`echo $@ | sed s/-recursive//`; \
     139        list='$(SUBDIRS)'; for subdir in $$list; do \
     140          echo "Making $$target in $$subdir"; \
     141          if test "$$subdir" = "."; then \
     142            dot_seen=yes; \
     143            local_target="$$target-am"; \
     144          else \
     145            local_target="$$target"; \
     146          fi; \
     147          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     148           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     149        done; \
     150        if test "$$dot_seen" = "no"; then \
     151          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
     152        fi; test -z "$$fail"
     153
     154mostlyclean-recursive clean-recursive distclean-recursive \
     155maintainer-clean-recursive:
     156        @set fnord $(MAKEFLAGS); amf=$$2; \
     157        dot_seen=no; \
     158        rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
     159          rev="$$subdir $$rev"; \
     160          test "$$subdir" = "." && dot_seen=yes; \
     161        done; \
     162        test "$$dot_seen" = "no" && rev=". $$rev"; \
     163        target=`echo $@ | sed s/-recursive//`; \
     164        for subdir in $$rev; do \
     165          echo "Making $$target in $$subdir"; \
     166          if test "$$subdir" = "."; then \
     167            local_target="$$target-am"; \
     168          else \
     169            local_target="$$target"; \
     170          fi; \
     171          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     172           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     173        done && test -z "$$fail"
     174tags-recursive:
     175        list='$(SUBDIRS)'; for subdir in $$list; do \
     176          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
     177        done
     178
     179tags: TAGS
     180
     181ID: $(HEADERS) $(SOURCES) $(LISP)
     182        list='$(SOURCES) $(HEADERS)'; \
     183        unique=`for i in $$list; do echo $$i; done | \
     184          awk '    { files[$$0] = 1; } \
     185               END { for (i in files) print i; }'`; \
     186        here=`pwd` && cd $(srcdir) \
     187          && mkid -f$$here/ID $$unique $(LISP)
     188
     189TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
     190        tags=; \
     191        here=`pwd`; \
     192        list='$(SUBDIRS)'; for subdir in $$list; do \
     193   if test "$$subdir" = .; then :; else \
     194            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
     195   fi; \
     196        done; \
     197        list='$(SOURCES) $(HEADERS)'; \
     198        unique=`for i in $$list; do echo $$i; done | \
     199          awk '    { files[$$0] = 1; } \
     200               END { for (i in files) print i; }'`; \
     201        test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
     202          || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
     203
     204mostlyclean-tags:
     205
     206clean-tags:
     207
     208distclean-tags:
     209        -rm -f TAGS ID
     210
     211maintainer-clean-tags:
     212
     213distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
     214
     215subdir = src/i386
     216
     217distdir: $(DISTFILES)
     218        here=`cd $(top_builddir) && pwd`; \
     219        top_distdir=`cd $(top_distdir) && pwd`; \
     220        distdir=`cd $(distdir) && pwd`; \
     221        cd $(top_srcdir) \
     222          && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign src/i386/Makefile
     223        @for file in $(DISTFILES); do \
     224          d=$(srcdir); \
     225          if test -d $$d/$$file; then \
     226            cp -pr $$d/$$file $(distdir)/$$file; \
     227          else \
     228            test -f $(distdir)/$$file \
     229            || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
     230            || cp -p $$d/$$file $(distdir)/$$file || :; \
     231          fi; \
     232        done
     233        for subdir in $(SUBDIRS); do \
     234          if test "$$subdir" = .; then :; else \
     235            test -d $(distdir)/$$subdir \
     236            || mkdir $(distdir)/$$subdir \
     237            || exit 1; \
     238            chmod 777 $(distdir)/$$subdir; \
     239            (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
     240              || exit 1; \
     241          fi; \
     242        done
     243info-am:
     244info: info-recursive
     245dvi-am:
     246dvi: dvi-recursive
     247check-am: all-am
     248check: check-recursive
     249installcheck-am:
     250installcheck: installcheck-recursive
     251install-exec-am:
     252install-exec: install-exec-recursive
     253
     254install-data-am:
     255install-data: install-data-recursive
     256
     257install-am: all-am
     258        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
     259install: install-recursive
     260uninstall-am:
     261uninstall: uninstall-recursive
     262all-am: Makefile
     263all-redirect: all-recursive
     264install-strip:
     265        $(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
     266installdirs: installdirs-recursive
     267installdirs-am:
     268
     269
     270mostlyclean-generic:
     271
     272clean-generic:
     273
     274distclean-generic:
     275        -rm -f Makefile $(CONFIG_CLEAN_FILES)
     276        -rm -f config.cache config.log stamp-h stamp-h[0-9]*
     277
     278maintainer-clean-generic:
     279mostlyclean-am:  mostlyclean-tags mostlyclean-generic
     280
     281mostlyclean: mostlyclean-recursive
     282
     283clean-am:  clean-tags clean-generic mostlyclean-am
     284
     285clean: clean-recursive
     286
     287distclean-am:  distclean-tags distclean-generic clean-am
     288
     289distclean: distclean-recursive
     290
     291maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
     292                distclean-am
     293        @echo "This command is intended for maintainers to use;"
     294        @echo "it deletes files that may require special tools to rebuild."
     295
     296maintainer-clean: maintainer-clean-recursive
     297
     298.PHONY: install-data-recursive uninstall-data-recursive \
     299install-exec-recursive uninstall-exec-recursive installdirs-recursive \
     300uninstalldirs-recursive all-recursive check-recursive \
     301installcheck-recursive info-recursive dvi-recursive \
     302mostlyclean-recursive distclean-recursive clean-recursive \
     303maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
     304distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
     305dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
     306install-exec install-data-am install-data install-am install \
     307uninstall-am uninstall all-redirect all-am all installdirs-am \
     308installdirs mostlyclean-generic distclean-generic clean-generic \
     309maintainer-clean-generic clean mostlyclean distclean maintainer-clean
     310
     311
     312depend-recursive \
     313preinstall-recursive \
     314debug-recursive \
     315profile-recursive:
     316        @set fnord $(MAKEFLAGS); amf=$$2; \
     317        dot_seen=no; \
     318        target=`echo $@ | sed s/-recursive//`; \
     319        list='$(SUBDIRS)'; for subdir in $$list; do \
     320          echo "Making $$target in $$subdir"; \
     321          if test "$$subdir" = "."; then \
     322            dot_seen=yes; \
     323            local_target="$$target-am"; \
     324          else \
     325            local_target="$$target"; \
     326          fi; \
     327          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     328           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     329        done; \
     330        if test "$$dot_seen" = "no"; then \
     331          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
     332        fi; test -z "$$fail"
     333
     334debug: debug-recursive
     335.PHONY: debug-recursive
     336
     337profile: profile-recursive
     338.PHONY: profile-recursive
     339
     340preinstall: preinstall-recursive
     341.PHONY: preinstall-recursive
     342
     343depend: depend-recursive
     344.PHONY: depend-recursive
     345
     346debug-am:
     347debug: debug-am
     348.PHONY: debug debug-am
     349
     350profile-am:
     351profile: profile-am
     352.PHONY: profile profile-am
     353
     354preinstall-am: $(TMPINSTALL_FILES)
     355preinstall: preinstall-am
     356.PHONY: preinstall preinstall-am
     357
     358depend-am:
     359depend: depend-am
     360.PHONY: depend depend-am
     361
     362# Tell versions [3.59,3.63) of GNU make to not export all variables.
     363# Otherwise a system limit (for SysV at least) may be exceeded.
     364.NOEXPORT:
  • c/src/librdbg/src/i386/any/Makefile.in

    r8ab8646 r45269dc  
    66srcdir = @srcdir@
    77top_srcdir = @top_srcdir@
    8 top_builddir = ../..
    9 subdir = i386/pc386
     8top_builddir = ../../..
     9subdir = src/i386/pc386
    1010
    1111RTEMS_ROOT = @RTEMS_ROOT@
  • c/src/librdbg/src/i386/pc386/Makefile.in

    r8ab8646 r45269dc  
    66srcdir = @srcdir@
    77top_srcdir = @top_srcdir@
    8 top_builddir = ../..
    9 subdir = i386/pc386
     8top_builddir = ../../..
     9subdir = src/i386/pc386
    1010
    1111RTEMS_ROOT = @RTEMS_ROOT@
  • c/src/librdbg/src/powerpc/Makefile.in

    r8ab8646 r45269dc  
    1 #
    2 #  $Id$
    3 #
    4 
    5 @SET_MAKE@
     1# Makefile.in generated automatically by automake 1.4a from Makefile.am
     2
     3# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
     4# This Makefile.in is free software; the Free Software Foundation
     5# gives unlimited permission to copy and/or distribute it,
     6# with or without modifications, as long as this notice is preserved.
     7
     8# This program is distributed in the hope that it will be useful,
     9# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
     10# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
     11# PARTICULAR PURPOSE.
     12
     13
     14
     15
     16SHELL = @SHELL@
     17
    618srcdir = @srcdir@
    719top_srcdir = @top_srcdir@
    8 top_builddir = ..
    9 subdir = powerpc
    10 
     20VPATH = @srcdir@
     21prefix = @prefix@
     22exec_prefix = @exec_prefix@
     23
     24bindir = @bindir@
     25sbindir = @sbindir@
     26libexecdir = @libexecdir@
     27datadir = @datadir@
     28sysconfdir = @sysconfdir@
     29sharedstatedir = @sharedstatedir@
     30localstatedir = @localstatedir@
     31libdir = @libdir@
     32infodir = @infodir@
     33mandir = @mandir@
     34includedir = @includedir@
     35oldincludedir = /usr/include
     36
     37DESTDIR =
     38
     39pkgdatadir = $(datadir)/@PACKAGE@
     40pkglibdir = $(libdir)/@PACKAGE@
     41pkgincludedir = $(includedir)/@PACKAGE@
     42
     43top_builddir = ../..
     44
     45ACLOCAL = @ACLOCAL@
     46AUTOCONF = @AUTOCONF@
     47AUTOMAKE = @AUTOMAKE@
     48AUTOHEADER = @AUTOHEADER@
     49
     50INSTALL = @INSTALL@
     51INSTALL_PROGRAM = @INSTALL_PROGRAM@
     52INSTALL_DATA = @INSTALL_DATA@
     53INSTALL_SCRIPT = @INSTALL_SCRIPT@
     54INSTALL_STRIP_FLAG =
     55transform = @program_transform_name@
     56
     57NORMAL_INSTALL = :
     58PRE_INSTALL = :
     59POST_INSTALL = :
     60NORMAL_UNINSTALL = :
     61PRE_UNINSTALL = :
     62POST_UNINSTALL = :
     63build_alias = @build_alias@
     64build_triplet = @build@
     65host_alias = @host_alias@
     66host_triplet = @host@
     67target_alias = @target_alias@
     68target_triplet = @target@
     69AWK = @AWK@
     70CC = @CC@
     71CC_FOR_TARGET = @CC_FOR_TARGET@
     72CPP = @CPP@
     73GCCSED = @GCCSED@
     74HAS_MP = @HAS_MP@
     75HAS_NETWORKING = @HAS_NETWORKING@
     76HAS_POSIX_API = @HAS_POSIX_API@
     77HAS_RDBG = @HAS_RDBG@
     78INSTALL_CHANGE = @INSTALL_CHANGE@
     79MAINT = @MAINT@
     80MAKEINFO = @MAKEINFO@
     81PACKAGE = @PACKAGE@
     82PACKHEX = @PACKHEX@
     83PROJECT_INCLUDE = @PROJECT_INCLUDE@
     84PROJECT_ROOT = @PROJECT_ROOT@
     85RPCGEN = @RPCGEN@
     86RTEMS_BSP = @RTEMS_BSP@
     87RTEMS_CPU = @RTEMS_CPU@
     88RTEMS_HAS_MULTIPROCESSING = @RTEMS_HAS_MULTIPROCESSING@
     89RTEMS_HAS_NETWORKING = @RTEMS_HAS_NETWORKING@
     90RTEMS_HAS_POSIX_API = @RTEMS_HAS_POSIX_API@
     91RTEMS_HAS_RDBG = @RTEMS_HAS_RDBG@
     92RTEMS_HOST = @RTEMS_HOST@
     93RTEMS_LIBC_DIR = @RTEMS_LIBC_DIR@
    1194RTEMS_ROOT = @RTEMS_ROOT@
    12 PROJECT_ROOT = @PROJECT_ROOT@
    13 
    14 VPATH = @srcdir@
    15 
    16 include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
    17 include $(RTEMS_ROOT)/make/directory.cfg
    18 
    19 INSTALL_CHANGE = @INSTALL_CHANGE@
    20 
    21 SUB_DIRS = @RTEMS_BSP@
    22 
    23 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     95RTEMS_TOPdir = @RTEMS_TOPdir@
     96VERSION = @VERSION@
     97
     98AUTOMAKE_OPTIONS = foreign 1.4
     99ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
     100
     101SUBDIRS = mcp750
     102
     103EXTRA_DIST =  excep_f.c rdbg_cpu_asm.S rdbg_f.c
     104
     105mkinstalldirs = $(SHELL) $(top_srcdir)/../../../mkinstalldirs
     106CONFIG_CLEAN_FILES =
     107DIST_COMMON =  Makefile.am Makefile.in
     108
     109
     110DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
     111
     112TAR = gtar
     113GZIP_ENV = --best
     114all: all-redirect
     115.SUFFIXES:
     116$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../automake/subdirs.am $(top_srcdir)/../../../automake/local.am
     117        cd $(top_srcdir) && $(AUTOMAKE) --foreign src/powerpc/Makefile
     118
     119Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
    24120        cd $(top_builddir) \
    25          && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
     121          && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
     122
     123
     124# This directory's subdirectories are mostly independent; you can cd
     125# into them and run `make' without going through this Makefile.
     126# To change the values of `make' variables: instead of editing Makefiles,
     127# (1) if the variable is set in `config.status', edit `config.status'
     128#     (which will cause the Makefiles to be regenerated when you run `make');
     129# (2) otherwise, pass the desired values on the `make' command line.
     130
     131@SET_MAKE@
     132
     133all-recursive install-data-recursive install-exec-recursive \
     134installdirs-recursive install-recursive uninstall-recursive  \
     135check-recursive installcheck-recursive info-recursive dvi-recursive:
     136        @set fnord $(MAKEFLAGS); amf=$$2; \
     137        dot_seen=no; \
     138        target=`echo $@ | sed s/-recursive//`; \
     139        list='$(SUBDIRS)'; for subdir in $$list; do \
     140          echo "Making $$target in $$subdir"; \
     141          if test "$$subdir" = "."; then \
     142            dot_seen=yes; \
     143            local_target="$$target-am"; \
     144          else \
     145            local_target="$$target"; \
     146          fi; \
     147          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     148           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     149        done; \
     150        if test "$$dot_seen" = "no"; then \
     151          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
     152        fi; test -z "$$fail"
     153
     154mostlyclean-recursive clean-recursive distclean-recursive \
     155maintainer-clean-recursive:
     156        @set fnord $(MAKEFLAGS); amf=$$2; \
     157        dot_seen=no; \
     158        rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
     159          rev="$$subdir $$rev"; \
     160          test "$$subdir" = "." && dot_seen=yes; \
     161        done; \
     162        test "$$dot_seen" = "no" && rev=". $$rev"; \
     163        target=`echo $@ | sed s/-recursive//`; \
     164        for subdir in $$rev; do \
     165          echo "Making $$target in $$subdir"; \
     166          if test "$$subdir" = "."; then \
     167            local_target="$$target-am"; \
     168          else \
     169            local_target="$$target"; \
     170          fi; \
     171          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     172           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     173        done && test -z "$$fail"
     174tags-recursive:
     175        list='$(SUBDIRS)'; for subdir in $$list; do \
     176          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
     177        done
     178
     179tags: TAGS
     180
     181ID: $(HEADERS) $(SOURCES) $(LISP)
     182        list='$(SOURCES) $(HEADERS)'; \
     183        unique=`for i in $$list; do echo $$i; done | \
     184          awk '    { files[$$0] = 1; } \
     185               END { for (i in files) print i; }'`; \
     186        here=`pwd` && cd $(srcdir) \
     187          && mkid -f$$here/ID $$unique $(LISP)
     188
     189TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
     190        tags=; \
     191        here=`pwd`; \
     192        list='$(SUBDIRS)'; for subdir in $$list; do \
     193   if test "$$subdir" = .; then :; else \
     194            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
     195   fi; \
     196        done; \
     197        list='$(SOURCES) $(HEADERS)'; \
     198        unique=`for i in $$list; do echo $$i; done | \
     199          awk '    { files[$$0] = 1; } \
     200               END { for (i in files) print i; }'`; \
     201        test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
     202          || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
     203
     204mostlyclean-tags:
     205
     206clean-tags:
     207
     208distclean-tags:
     209        -rm -f TAGS ID
     210
     211maintainer-clean-tags:
     212
     213distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
     214
     215subdir = src/powerpc
     216
     217distdir: $(DISTFILES)
     218        here=`cd $(top_builddir) && pwd`; \
     219        top_distdir=`cd $(top_distdir) && pwd`; \
     220        distdir=`cd $(distdir) && pwd`; \
     221        cd $(top_srcdir) \
     222          && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign src/powerpc/Makefile
     223        @for file in $(DISTFILES); do \
     224          d=$(srcdir); \
     225          if test -d $$d/$$file; then \
     226            cp -pr $$d/$$file $(distdir)/$$file; \
     227          else \
     228            test -f $(distdir)/$$file \
     229            || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
     230            || cp -p $$d/$$file $(distdir)/$$file || :; \
     231          fi; \
     232        done
     233        for subdir in $(SUBDIRS); do \
     234          if test "$$subdir" = .; then :; else \
     235            test -d $(distdir)/$$subdir \
     236            || mkdir $(distdir)/$$subdir \
     237            || exit 1; \
     238            chmod 777 $(distdir)/$$subdir; \
     239            (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
     240              || exit 1; \
     241          fi; \
     242        done
     243info-am:
     244info: info-recursive
     245dvi-am:
     246dvi: dvi-recursive
     247check-am: all-am
     248check: check-recursive
     249installcheck-am:
     250installcheck: installcheck-recursive
     251install-exec-am:
     252install-exec: install-exec-recursive
     253
     254install-data-am:
     255install-data: install-data-recursive
     256
     257install-am: all-am
     258        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
     259install: install-recursive
     260uninstall-am:
     261uninstall: uninstall-recursive
     262all-am: Makefile
     263all-redirect: all-recursive
     264install-strip:
     265        $(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
     266installdirs: installdirs-recursive
     267installdirs-am:
     268
     269
     270mostlyclean-generic:
     271
     272clean-generic:
     273
     274distclean-generic:
     275        -rm -f Makefile $(CONFIG_CLEAN_FILES)
     276        -rm -f config.cache config.log stamp-h stamp-h[0-9]*
     277
     278maintainer-clean-generic:
     279mostlyclean-am:  mostlyclean-tags mostlyclean-generic
     280
     281mostlyclean: mostlyclean-recursive
     282
     283clean-am:  clean-tags clean-generic mostlyclean-am
     284
     285clean: clean-recursive
     286
     287distclean-am:  distclean-tags distclean-generic clean-am
     288
     289distclean: distclean-recursive
     290
     291maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
     292                distclean-am
     293        @echo "This command is intended for maintainers to use;"
     294        @echo "it deletes files that may require special tools to rebuild."
     295
     296maintainer-clean: maintainer-clean-recursive
     297
     298.PHONY: install-data-recursive uninstall-data-recursive \
     299install-exec-recursive uninstall-exec-recursive installdirs-recursive \
     300uninstalldirs-recursive all-recursive check-recursive \
     301installcheck-recursive info-recursive dvi-recursive \
     302mostlyclean-recursive distclean-recursive clean-recursive \
     303maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
     304distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
     305dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
     306install-exec install-data-am install-data install-am install \
     307uninstall-am uninstall all-redirect all-am all installdirs-am \
     308installdirs mostlyclean-generic distclean-generic clean-generic \
     309maintainer-clean-generic clean mostlyclean distclean maintainer-clean
     310
     311
     312depend-recursive \
     313preinstall-recursive \
     314debug-recursive \
     315profile-recursive:
     316        @set fnord $(MAKEFLAGS); amf=$$2; \
     317        dot_seen=no; \
     318        target=`echo $@ | sed s/-recursive//`; \
     319        list='$(SUBDIRS)'; for subdir in $$list; do \
     320          echo "Making $$target in $$subdir"; \
     321          if test "$$subdir" = "."; then \
     322            dot_seen=yes; \
     323            local_target="$$target-am"; \
     324          else \
     325            local_target="$$target"; \
     326          fi; \
     327          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
     328           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
     329        done; \
     330        if test "$$dot_seen" = "no"; then \
     331          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
     332        fi; test -z "$$fail"
     333
     334debug: debug-recursive
     335.PHONY: debug-recursive
     336
     337profile: profile-recursive
     338.PHONY: profile-recursive
     339
     340preinstall: preinstall-recursive
     341.PHONY: preinstall-recursive
     342
     343depend: depend-recursive
     344.PHONY: depend-recursive
     345
     346debug-am:
     347debug: debug-am
     348.PHONY: debug debug-am
     349
     350profile-am:
     351profile: profile-am
     352.PHONY: profile profile-am
     353
     354preinstall-am: $(TMPINSTALL_FILES)
     355preinstall: preinstall-am
     356.PHONY: preinstall preinstall-am
     357
     358depend-am:
     359depend: depend-am
     360.PHONY: depend depend-am
     361
     362# Tell versions [3.59,3.63) of GNU make to not export all variables.
     363# Otherwise a system limit (for SysV at least) may be exceeded.
     364.NOEXPORT:
  • c/src/librdbg/src/powerpc/mcp750/Makefile.in

    r8ab8646 r45269dc  
    66srcdir = @srcdir@
    77top_srcdir = @top_srcdir@
    8 top_builddir = ../..
    9 subdir = powerpc/mcp750
     8top_builddir = ../../..
     9subdir = src/powerpc/mcp750
    1010
    1111RTEMS_ROOT = @RTEMS_ROOT@
  • cpukit/libcsupport/Makefile.am

    r8ab8646 r45269dc  
    66ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
    77
    8 if HAS_RDBG
    9 LIBRDBG = librdbg
    10 endif
    11 
    128if HAS_LIBCHIP
    139LIBCHIP = libchip
     
    1511
    1612SUBDIRS = start include libmisc libc libcpu libbsp \
    17     $(LIBRDBG) $(LIBCHIP) $(LIBHWAPI)
     13    $(LIBCHIP) $(LIBHWAPI)
    1814
    1915include $(top_srcdir)/../../../automake/subdirs.am
Note: See TracChangeset for help on using the changeset viewer.