Index: src/lib/libbsp/or32/.cvsignore
===================================================================
--- c/src/lib/libbsp/or32/.cvsignore	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,14 +1,0 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
-Makefile
-Makefile.in
-missing
-mkinstalldirs
Index: src/lib/libbsp/or32/ChangeLog
===================================================================
--- c/src/lib/libbsp/or32/ChangeLog	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,92 +1,0 @@
-2005-05-07	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* Makefile.am, configure.ac, acinclude.m4: Remove.
-
-2004-09-24	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* configure.ac: Require automake > 1.9.
-
-2004-02-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* acinclude.m4: Regenerate.
-
-2004-02-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: RTEMS_CHECK_BSPDIR([$RTEMS_BSP_FAMILY]).
-
-2004-01-13	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use @RTEMS_BSP_FAMILY@ instead of
-	$(RTEMS_BSP_FAMILY).
-
-2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Require automake >= 1.8, autoconf >= 2.59.
-
-2003-10-20	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* acinclude.m4: Reflect changes to bootstrap.
-	* configure.ac: Remove RTEMS_CHECK_CUSTON_BSP.
-
-2003-08-18	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved automake/.
-
-2003-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Use rtems-bugs@rtems.com as bug report email address.
-
-2003-03-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
-
-2003-02-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: AC_PREREQ(2.57).
-
-2002-12-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove RTEMS_CHECK_BSP_CACHE.
-
-2002-10-21	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Reformat.
-	Add autom4te*cache.
-	Remove autom4te.cache.
-
-2002-08-07	Ivan Guzvinec <ivang@opencores.org>
-
-	* acinclude.m4, configure.ac: Bender BSP renamed to OpenRisc
-	Reference Platform or ORP.
-
-2002-08-06	Joel Sherrill <joel@OARcorp.com>
-
-	* acinclude.m4, configure.ac: Go back to name bender for
-	the or32/or1200 BSP.
-
-2002-08-06	Joel Sherrill <joel@OARcorp.com>
-
-	* acinclude.m4, configure.ac: Update and fix minor things so this
-	BSP compiles and almost completely links.
-
-2002-08-06	Joel Sherrill <joel@OARcorp.com>
-
-	* .cvsignore: New file.
-
-2002-08-06	Joel Sherrill <joel@OARcorp.com>
-
-	* Makefile.am: New file.
-
-2002-08-06	Chris Ziomkowski <chris@asics.ws>
-
-	* ChangeLog, acinclude.m4, configure.ac: New files added as part
-	of merge from OpenCores repository.
-
Index: src/lib/libbsp/or32/Makefile.am
===================================================================
--- c/src/lib/libbsp/or32/Makefile.am	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,14 +1,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../aclocal
-
-## Descend into the @RTEMS_BSP_FAMILY@ directory
-## Currently, the shared directory is not explicitly
-## added but it is present in the source tree.
-## Currently no shared
-SUBDIRS = @RTEMS_BSP_FAMILY@
-
-include $(top_srcdir)/../../../automake/subdirs.am
-include $(top_srcdir)/../../../automake/local.am
Index: src/lib/libbsp/or32/acinclude.m4
===================================================================
--- c/src/lib/libbsp/or32/acinclude.m4	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,10 +1,0 @@
-# RTEMS_CHECK_BSPDIR(RTEMS_BSP_FAMILY)
-AC_DEFUN([RTEMS_CHECK_BSPDIR],
-[
-  case "$1" in
-  orp )
-    AC_CONFIG_SUBDIRS([orp]);;
-  *)
-    AC_MSG_ERROR([Invalid BSP]);;
-  esac
-])
Index: src/lib/libbsp/or32/configure.ac
===================================================================
--- c/src/lib/libbsp/or32/configure.ac	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,21 +1,0 @@
-## Process this file with autoconf to produce a configure script.
-## 
-## $Id$
-
-AC_PREREQ(2.59)
-AC_INIT([rtems-c-src-lib-libbsp-or32],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-AC_CONFIG_SRCDIR([orp])
-RTEMS_TOP(../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define foreign 1.9])
-AM_MAINTAINER_MODE
-
-RTEMS_ENV_RTEMSBSP
-
-RTEMS_PROJECT_ROOT
-RTEMS_CHECK_BSPDIR([$RTEMS_BSP_FAMILY])
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
Index: src/lib/libbsp/or32/orp/.cvsignore
===================================================================
--- c/src/lib/libbsp/or32/orp/.cvsignore	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,14 +1,0 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
-Makefile
-Makefile.in
-missing
-mkinstalldirs
Index: src/lib/libbsp/or32/orp/ChangeLog
===================================================================
--- c/src/lib/libbsp/or32/orp/ChangeLog	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,287 +1,0 @@
-2005-05-07	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* bsp_specs, clock/clockdrv.c, configure.ac,
-	console/console.c, console/console.h, include/bsp.h,
-	include/tm27.h, Makefile.am, README, start/start.S, 
-	startup/bspclean.c, startup/bspstart.c, startup/linkcmds, 
-	startup/setvec.c, timer/timer.c, timer/timerisr.c, times: Remove.
-
-2005-01-07	Ralf Corsepius <ralf.corsepius@rtems.org>
-	* Makefile.am: Eliminate CFLAGS_OPTIMIZE_V.
-
-2005-01-02	Ralf Corsepius <ralf.corsepius@rtems.org>
-
-	* Makefile.am: Remove build-variant support.
-
-2004-09-24	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* configure.ac: Require automake > 1.9.
-
-2004-04-23	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	PR 610/bsps
-	* Makefile.am: Add include/tm27.h, Cosmetics.
-	* include/tm27.h: Final cosmetics.
-
-2004-04-22	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* include/bsp.h: Split out tmtest27 support.
-	* include/tm27.h: New.
-
-2004-04-21	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	PR 613/bsps
-	* include/bsp.h: Remove MAX_LONG_TEST_DURATION.
-
-2004-04-21	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	PR 614/bsps
-	* include/bsp.h: Remove MAX_SHORT_TEST_DURATION (Unused).
-
-2004-04-02	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* start/start.S: Include <rtems/asm.h> instead of <asm.h>.
-
-2004-04-01	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* include/bsp.h: Include <rtems/clockdrv.h> instead of <clockdrv.h>.
-	* include/bsp.h: Include <rtems/console.h> instead of <console.h>.
-
-2004-03-31	Ralf Corsepius <ralf_corsepius@rtems.org>
-
-	* clock/clockdrv.c, console/console.c, startup/bspstart.c,
-	timer/timer.c, timer/timerisr.c: Convert to using c99 fixed size
-	types.
-
-2004-02-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect changes to bsp.am. 
-	Preinstall dist_project_lib*.
-
-2004-02-14	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect changes to bsp.am.
-
-2004-02-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use CPPASCOMPILE instead of CCASCOMPILE.
-
-2004-01-30	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Cosmetics.
-
-2004-01-30	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Merge-in clock/Makefile.am, console/Makefile.am,
-	start/Makefile.am, startup/Makefile.am, timer/Makefile.am,
-	wrapup/Makefile.am. Use automake compilation rules.
-	* clock/Makefile.am, console/Makefile.am, start/Makefile.am,
-	startup/Makefile.am, timer/Makefile.am, wrapup/Makefile.am: Remove.
-	* configure.ac: Reflect changes above.
-
-2004-01-28	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Add nostdinc to AUTOMAKE_OPTIONS.
-	Add RTEMS_PROG_CCAS.
-
-2004-01-21	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Add PREINSTALL_DIRS.
-
-2004-01-14	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Re-add dirstamps to PRE/TMPINSTALL_FILES.
-	Add PRE/TMPINSTALL_FILES to CLEANFILES.
-	* start/Makefile.am: Ditto.
-	* startup/Makefile.am: Ditto.
-
-2004-01-05	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* wrapup/Makefile.am: Eliminate $(LIB). 
-	Use noinst_DATA to trigger building libbsp.a.
-
-2003-12-13	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
-	* startup/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
-
-2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
-	* startup/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
-
-2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Require automake >= 1.8, autoconf >= 2.59.
-
-2003-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* wrapup/Makefile.am: Cosmetics.
-
-2003-12-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: Misc cleanups and fixes.
-	* startup/Makefile.am: Misc cleanups and fixes.
-	* wrapup/Makefile.am: Misc cleanups and fixes.
-
-2003-12-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* startup/Makefile.am: Remove S_FILES. Cosmetics.
-
-2003-12-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Add preinstallation dirstamp support.
-	* clock/Makefile.am: Cosmetics.
-	* console/Makefile.am: Cosmetics.
-	* startup/Makefile.am: Cosmetics.
-	* timer/Makefile.am: Cosmetics.
-	* wrapup/Makefile.am: Cosmetics.
-
-2003-12-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am: Remove all-local: $(ARCH).
-	* console/Makefile.am: Remove all-local: $(ARCH).
-	* start/Makefile.am: Remove all-local: $(ARCH).
-	* startup/Makefile.am: Remove all-local: $(ARCH).
-	* timer/Makefile.am: Remove all-local: $(ARCH).
-	* wrapup/Makefile.am: Remove all-local: $(ARCH).
-
-2003-09-29	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Merge-in include/Makefile.am.
-	Reflect changes to bsp.am.
-	* include/Makefile.am: Remove.
-	* configure.ac: Reflect changes above.
-
-2003-09-08	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* bsp_specs: Remove *lib:.
-
-2003-09-04	Joel Sherrill <joel@OARcorp.com>
-
-	* clock/clockdrv.c, console/console.c, console/console.h,
-	include/bsp.h, start/start.S, startup/bspclean.c, startup/bspstart.c,
-	startup/linkcmds, startup/setvec.c, timer/timer.c, timer/timerisr.c:
-	URL for license changed.
-
-2003-08-18	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved automake/.
-	* clock/Makefile.am: Reflect having moved automake/.
-	* console/Makefile.am: Reflect having moved automake/.
-	* include/Makefile.am: Reflect having moved automake/.
-	* start/Makefile.am: Reflect having moved automake/.
-	* startup/Makefile.am: Reflect having moved automake/.
-	* timer/Makefile.am: Reflect having moved automake/.
-	* wrapup/Makefile.am: Reflect having moved automake/.
-
-2003-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Use rtems-bugs@rtems.com as bug report email address.
-
-2003-08-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	PR 445/bsps
-	* bsp_specs: Remove -D__embedded__ -Asystem(embedded) from cpp.
-	Remove cpp, old_cpp (now unused).
-
-2003-03-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
-
-2003-02-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: AC_PREREQ(2.57).
-
-2003-01-20	Joel Sherrill <joel@OARcorp.com>
-
-	* startup/linkcmds*: Add FreeBSD sysctl() sections.
-
-2002-12-17	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-	* timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-
-2002-12-12	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* start/Makefile.am: Use install-data-local to install startfile.
-
-2002-12-10	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
-
-2002-10-21	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Reformat.
-	Add autom4te*cache.
-	Remove autom4te.cache.
-
-2002-10-09	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Add autom4te.cache.
-
-2002-09-14	Ivan Guzvinec <ivang@opencores.org>
-
-	* include/bsp.h, startup/Makefile.am, startup/bspclean.c:
-	Cleanup so the BSP works.
-
-2002-08-21	Joel Sherrill <joel@OARcorp.com>
-
-	* bsp_specs: Added support for -nostdlibs.
-
-2002-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* clock/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* console/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* start/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* startup/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* timer/Makefile.am: Use .$(OBJEXT) instead of .o.
- 	* wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
-
-2002-08-07	Ivan Guzvinec <ivang@opencores.org>
-
-	* configure.ac: Bender BSP renamed to OpenRisc Reference Platform 
-	for ORP.
-
-2002-08-07	Ivan Guzvinec <ivang@opencores.org>
-
-	* include/bsp.h, start/start.S, startup/linkcmds: Patches which
-	were required to make the BSP run.
-
-2002-08-06	Joel Sherrill <joel@OARcorp.com>
-
-	* configure.ac: GO back to name bender for the or32/or1200 BSP.
-
-2002-08-06	Joel Sherrill <joel@OARcorp.com>
-
-	* bsp_specs, configure.ac, startup/bspstart.c: Update and fix
-	minor things so this BSP compiles and almost completely links.
-	* startup/Makefile.am: New file.
-
-2002-08-06	Joel Sherrill <joel@OARcorp.com>
-
-	* include/.cvsignore: Updated to account for more files.
-
-2002-08-06	Chris Ziomkowski <chris@asics.ws>
-
-	* .cvsignore, Makefile.am, README, bsp_specs, configure.ac, times,
-	clock/.cvsignore, clock/Makefile.am, clock/clockdrv.c,
-	console/.cvsignore, console/Makefile.am, console/console.c,
-	console/console.h, include/.cvsignore, include/Makefile.am,
-	include/bsp.h, start/.cvsignore, start/Makefile.am, start/start.S,
-	startup/.cvsignore, startup/bspclean.c, startup/bspstart.c,
-	startup/linkcmds, startup/main.c, startup/setvec.c, timer/.cvsignore,
-	timer/Makefile.am, timer/timer.c, timer/timerisr.c,
-	wrapup/.cvsignore, wrapup/Makefile.am, ChangeLog: New files added
-	as part of merge from OpenCores repository.
Index: src/lib/libbsp/or32/orp/Makefile.am
===================================================================
--- c/src/lib/libbsp/or32/orp/Makefile.am	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,104 +1,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../../aclocal
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../bsp.am
-
-dist_project_lib_DATA = bsp_specs
-
-include_HEADERS = include/bsp.h
-include_HEADERS += include/tm27.h
-
-nodist_include_HEADERS = include/bspopts.h
-DISTCLEANFILES = include/bspopts.h
-
-noinst_PROGRAMS =
-
-include_HEADERS += include/coverhd.h
-
-EXTRA_DIST = start.S
-start.$(OBJEXT): start/start.S
-	$(CPPASCOMPILE) -DASM -o $@ -c $<
-project_lib_DATA = start.$(OBJEXT)
-
-dist_project_lib_DATA += startup/linkcmds
-
-noinst_PROGRAMS += startup.rel
-startup_rel_SOURCES = ../../shared/bsplibc.c ../../shared/bsppost.c \
-    startup/bspstart.c startup/bspclean.c ../../shared/bootcard.c \
-    ../../shared/main.c ../../shared/sbrk.c \
-    ../../shared/gnatinstallhandler.c startup/setvec.c
-startup_rel_CPPFLAGS = $(AM_CPPFLAGS)
-startup_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-
-noinst_PROGRAMS += clock.rel
-clock_rel_SOURCES = clock/clockdrv.c
-clock_rel_CPPFLAGS = $(AM_CPPFLAGS)
-clock_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-
-noinst_PROGRAMS += console.rel
-console_rel_SOURCES = console/console.c console/console.h
-console_rel_CPPFLAGS = $(AM_CPPFLAGS)
-console_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-
-noinst_PROGRAMS += timer.rel
-timer_rel_SOURCES = timer/timer.c timer/timerisr.c
-timer_rel_CPPFLAGS = $(AM_CPPFLAGS)
-timer_rel_LDFLAGS = $(RTEMS_RELLDFLAGS)
-
-noinst_LIBRARIES = libbsp.a
-libbsp_a_SOURCES =
-libbsp_a_LIBADD = startup.rel clock.rel console.rel timer.rel
-
-all-local: $(PREINSTALL_FILES) $(TMPINSTALL_FILES)
-
-PREINSTALL_DIRS =
-PREINSTALL_FILES =
-TMPINSTALL_FILES =
-
-$(PROJECT_INCLUDE)/$(dirstamp):
-	@$(mkdir_p) $(PROJECT_INCLUDE)
-	@: > $(PROJECT_INCLUDE)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
-
-$(PROJECT_LIB)/$(dirstamp):
-	@$(mkdir_p) $(PROJECT_LIB)
-	@: > $(PROJECT_LIB)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
-
-$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
-PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
-
-$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
-
-$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
-
-$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
-$(PROJECT_INCLUDE)/coverhd.h: include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
-
-$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
-
-$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
-
-CLEANFILES = $(PREINSTALL_FILES)
-DISTCLEANFILES += $(PREINSTALL_DIRS)
-CLEANFILES += $(TMPINSTALL_FILES)
-
-include $(top_srcdir)/../../../../automake/local.am
Index: src/lib/libbsp/or32/orp/README
===================================================================
--- c/src/lib/libbsp/or32/orp/README	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,69 +1,0 @@
-#
-#  $Id$
-#
-#  This is a sample hardware description file for a BSP.  This comment
-#  block does not have to appear in a real one.  The intention of this
-#  file is to provide a central place to look when searching for
-#  information about a board when starting a new BSP.  For example,
-#  you may want to find an existing timer driver for the chip you are
-#  using on your board.  It is easier to grep for the chip name in
-#  all of the HARDWARE files than to peruse the source tree.  Hopefully,
-#  making the HARDDWARE files accurate will also alleviate the common
-#  problem of not knowing anything about a board based on its BSP
-#  name.
-#
-#  NOTE:  If you have a class of peripheral chip on board which
-#         is not in this list please add it to this file so
-#         others will also use the same name.
-#
-#         Timer resolution is the way it is configured in this BSP.
-#         On a counting timer, this is the length of time which
-#         corresponds to 1 count.
-#
-
-BSP NAME:           fastsbc1
-BOARD:              Fasssst Computers, Fast SBC-1
-BUS:                SchoolBus
-CPU FAMILY:         i386
-CPU:                Intel Hexium
-COPROCESSORS:       Witch Hex87
-MODE:               32 bit mode
-
-DEBUG MONITOR:      HexBug
-
-PERIPHERALS
-===========
-TIMERS:             Intel i8254
-  RESOLUTION:         .0001 microseconds
-SERIAL PORTS:       Zilog Z8530 (with 2 ports)
-REAL-TIME CLOCK:    RTC-4
-DMA:                Intel i8259
-VIDEO:              none
-SCSI:               none
-NETWORKING:         none
-
-DRIVER INFORMATION
-==================
-CLOCK DRIVER:       RTC-4
-IOSUPP DRIVER:      Zilog Z8530 port A
-SHMSUPP:            polled and interrupts
-TIMER DRIVER:       Intel i8254
-TTY DRIVER:         stub only
-
-STDIO
-=====
-PORT:               Console port 0
-ELECTRICAL:         RS-232
-BAUD:               9600
-BITS PER CHARACTER: 8
-PARITY:             None
-STOP BITS:          1
-
-NOTES
-=====
-
-(1) 900 Mhz and 950 Mhz versions.
-
-(2) 1 Gb or 2 Gb RAM.
-
-(3) PC compatible if HexBug not enabled.
Index: src/lib/libbsp/or32/orp/bsp_specs
===================================================================
--- c/src/lib/libbsp/or32/orp/bsp_specs	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,12 +1,0 @@
-%rename endfile old_endfile
-%rename startfile old_startfile
-%rename link old_link
-
-*startfile:
-%{!qrtems: %(old_startfile)} %{!nostdlib: %{qrtems: \
-%{!qrtems_debug: start.o%s} \
-%{qrtems_debug: start_g.o%s}}}
-
-*link:
-%{!qrtems: %(old_link)} %{qrtems: -dc -dp -N -e _start}
-
Index: src/lib/libbsp/or32/orp/clock/clockdrv.c
===================================================================
--- c/src/lib/libbsp/or32/orp/clock/clockdrv.c	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,225 +1,0 @@
-/*  ckinit.c
- *
- *  This file provides a template for the clock device driver initialization.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <stdlib.h>
-
-#include <rtems.h>
-#include <rtems/libio.h>
-#include <bsp.h>
-static void (*old_handler)(unsigned int,unsigned int,unsigned int,unsigned int);
-
-void Clock_exit( void );
-void Clock_isr( rtems_vector_number vector,unsigned int pc,
-		unsigned int address, unsigned int sr);
-
-/*
- *  The interrupt vector number associated with the clock tick device
- *  driver.
- */
-
-#define CLOCK_VECTOR    8
-
-/*
- *  Clock_driver_ticks is a monotonically increasing counter of the
- *  number of clock ticks since the driver was initialized.
- */
-
-volatile uint32_t         Clock_driver_ticks;
-
-/*
- *  Clock_isrs is the number of clock ISRs until the next invocation of
- *  the RTEMS clock tick routine.  The clock tick device driver
- *  gets an interrupt once a millisecond and counts down until the
- *  length of time between the user configured microseconds per tick
- *  has passed.
- */
-
-uint32_t         Clock_isrs;              /* ISRs until next tick */
-
-/*
- * These are set by clock driver during its init
- */
-
-rtems_device_major_number rtems_clock_major = ~0;
-rtems_device_minor_number rtems_clock_minor;
-
-void Clock_exit( void );
-
-/* Write this to restart the Timer. Sets mode = 01,
-   interrupts enabled, interrupt not pending, report
-   at 200,000 (1 msec on 200 MHz CPU) */
-static const unsigned int TTMR_RESET = 0x60030D40;
-
-/*
- *  Isr Handler
- */
-
-void Clock_isr(uint32_t   vector,
-	       uint32_t   pc,
-	       uint32_t   ear,
-	       uint32_t   sr)
-{
-  register int pending;
-  register int value = 0x60002710;
-
-  /* Was it us? */
-  asm volatile ("l.mfspr %0,r0,0x4802 \n\t"  /* Read the PIC status */
-		"l.andi  %0,%0,0x8    \n\t" : "=r" (pending));
-
-  if(pending)
-    {
-      rtems_clock_tick();
-      asm ("l.mtspr r0,%0,0x5000 \n\t" :: "r" (value));
-    }
-
-  if(old_handler)
-    (*old_handler)(vector,pc,ear,sr);
-}
-
-/*
- *  Install_clock
- *
- *  Install a clock tick handler and reprograms the chip.  This
- *  is used to initially establish the clock tick.
- */
-
-void Install_clock()
-{
-  uint32_t   tmp,sr,ttmr,ttcr;
-  extern uint32_t   Or1k_Interrupt_Vectors[16];
-
-  ttmr = TTMR_RESET;    /* Reset value */
-  ttcr = 0;             /* Start at 0 */
-
-  /*
-   *  Initialize the clock tick device driver variables
-   */
-
-  /* Make sure the Timer (interrupt 3) is enabled and
-     reports a high prority interrupt */
-
-  asm volatile ("l.mfspr %0,r0,0x4800  \n\t"  /* Get the PIC mask */
-		"l.ori   %0,%0,0x8     \n\t"  /* Enable int 3 */
-		"l.mtspr r0,%0,0x4800  \n\t"  /* Write back mask */
-		"l.mfspr %0,r0,0x4801  \n\t"  /* Get priority mask */
-		"l.ori   %0,%0,0x8     \n\t"  /* Set us to high */
-		"l.mtspr r0,%0,0x4801  \n\t"  /* Write back to PICPR */
-		: "=r" (tmp));
-
-  /* Generate a 1 kHz interrupt */
-  asm volatile ("l.mfspr %0,r0,0x11 \n\t"    /* Get the current setting */
-		"l.addi  %1,r0,-5   \n\t"
-		"l.and   %1,%1,%0   \n\t"    /* Turn off interrupts */
-		"l.mtspr r0,%1,0x11 \n\t"    /* Set it in SR */
-		"l.mtspr r0,%2,0x5000\n\t"   /* Set TTMR */
-		"l.mtspr r0,%3,0x5100\n\t"   /* Set TTCR */
-		: "=&r" (sr), "=&r" (tmp) : "r" (ttmr), "r" (ttcr));
-
-  old_handler = (void(*)(unsigned int,unsigned int,unsigned int,unsigned int))
-    Or1k_Interrupt_Vectors[8];
-  Or1k_Interrupt_Vectors[8] = (uint32_t)Clock_isr;
-
-  asm volatile ("l.mtspr r0,%0,0x11\n\t":: "r" (sr));
-
-  Clock_driver_ticks = 0;
-
-  /*
-   *  Schedule the clock cleanup routine to execute if the application exits.
-   */
-
-  atexit( Clock_exit );
-}
-
-/*
- *  Clean up before the application exits
- */
-
-void Clock_exit( void )
-{
-  register int temp1;
-  register int temp2;
-
-  /* In the case of a fatal error, we should shut down
-     all the interrupts so we don't get woken up again. */
-  /* First, turn off the clock in the PIC */
-
-  asm volatile ("l.mfspr %0,r0,0x4800  \n\t"  /* Get the PIC mask */
-		"l.addi  %1,%1,-9      \n\t"  /* Create a mask to disable */
-		"l.and   %0,%1,%0      \n\t"  /* Mask us out */
-		"l.mtspr r0,%0,0x4800  \n\t"  /* Write back mask */
-		"l.mfspr %0,r0,0x4801  \n\t"  /* Get priority mask */
-		"l.and   %0,%1,%0      \n\t"  /* Set us to low */
-		"l.mtspr r0,%0,0x4801  \n\t"  /* Write back to PICPR */
-		: "=r" (temp1), "=r" (temp2));
-
-  /* Now turn off the clock at the timer */
-  asm volatile ("l.mtspr r0,r0,0x5000\n\t"   /* Clear TTMR */
-		"l.mtspr r0,r0,0x5100\n\t"); /* Clear TTCR */
-}
-
-/*
- *  Clock_initialize
- *
- *  Device driver entry point for clock tick driver initialization.
- */
-
-rtems_device_driver Clock_initialize(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void *pargp
-)
-{
-  Install_clock();
-
-  /*
-   * make major/minor avail to others such as shared memory driver
-   */
-
-  rtems_clock_major = major;
-  rtems_clock_minor = minor;
-
-  return RTEMS_SUCCESSFUL;
-}
-
-rtems_device_driver Clock_control(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void *pargp
-)
-{
-    uint32_t         isrlevel;
-    rtems_libio_ioctl_args_t *args = pargp;
-
-    if (args == 0)
-        goto done;
-
-    /*
-     * This is hokey, but until we get a defined interface
-     * to do this, it will just be this simple...
-     */
-
-    if (args->command == rtems_build_name('I', 'S', 'R', ' '))
-    {
-        Clock_isr(CLOCK_VECTOR,0,0,0);
-    }
-    else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
-    {
-      rtems_interrupt_disable( isrlevel );
-       (void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
-      rtems_interrupt_enable( isrlevel );
-    }
-
-done:
-    return RTEMS_SUCCESSFUL;
-}
Index: src/lib/libbsp/or32/orp/configure.ac
===================================================================
--- c/src/lib/libbsp/or32/orp/configure.ac	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,20 +1,0 @@
-## Process this file with autoconf to produce a configure script.
-## 
-## $Id$
-
-AC_PREREQ(2.59)
-AC_INIT([rtems-c-src-lib-libbsp-or32-orp],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-AC_CONFIG_SRCDIR([bsp_specs])
-RTEMS_TOP(../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
-RTEMS_BSP_CONFIGURE
-
-RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
-RTEMS_CANONICALIZE_TOOLS
-RTEMS_PROG_CCAS
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
Index: src/lib/libbsp/or32/orp/console/console.c
===================================================================
--- c/src/lib/libbsp/or32/orp/console/console.c	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,374 +1,0 @@
-/*
- *  This file contains the template for a console IO package.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  This file adapted from no_bsp board library of the RTEMS distribution.
- *  The body has been modified for the Bender Or1k implementation by
- *  Chris Ziomkowski. <chris@asics.ws>
- */
-
-#define BENDER_INIT
-
-#include <bsp.h>
-#include <rtems/libio.h>
-#include "console.h"
-
-static int localEcho;
-static UART_16450* uart = (UART_16450*)0x80000000;  /* This is where the simulator puts it */
-
-/*  console_initialize
- *
- *  This routine initializes the console IO driver.
- *
- *  Input parameters: NONE
- *
- *  Output parameters:  NONE
- *
- *  Return values:
- */
-
-void (*old_handler)(unsigned int,unsigned int,unsigned int,unsigned int);
-
-void console_interrupt(unsigned int vector,unsigned int pc,
-		       unsigned int effective_addr, unsigned int status)
-{
-  int reason;
-  register int pending;
-
-  /* First thing's first...is this for us? */
-  asm volatile ("l.mfspr %0,r0,0x4802 \n\t"  /* Read the PIC status */
-		"l.andi  %0,%0,0x4    \n\t" : "=r" (pending));
-
-  if(pending)
-    {
-      reason = uart->read.IIR;
-
-      switch(reason)
-	{
-	case 0: /* Interrupt because of modem status */
-	  break;
-	case 2: /* Interrupt because Transmitter empty */
-	  break;
-	case 4: /* Interrupt because Received data available */
-	  break;
-	case 6: /* Interrupt because Status Register */
-	  break;
-	case 12: /* Interrupt because of character timeout (16550 only) */
-	  break;
-	default: /* No interrupt */
-	  break;
-	}
-    }
-
-  if(old_handler)
-    (*old_handler)(vector,pc,effective_addr,status);
-}
-
-rtems_device_driver console_initialize(
-  rtems_device_major_number  major,
-  rtems_device_minor_number  minor,
-  void                      *arg
-)
-{
-  rtems_status_code status;
-  int tmp,tmp2;
-  uint32_t   sr;
-  extern uint32_t   Or1k_Interrupt_Vectors[16];
-
-  /* Make sure the UART (interrupt 2) is enabled and
-     reports a low prority interrupt */
-  asm volatile ("l.mfspr %0,r0,0x4800  \n\t"  /* Get the PIC mask */
-		"l.ori   %0,%0,0x4     \n\t"  /* Enable int 2 */
-		"l.mtspr r0,%0,0x4800  \n\t"  /* Write back mask */
-		"l.mfspr %0,r0,0x4801  \n\t"  /* Get priority mask */
-		"l.addi  %1,r0,-5      \n\t"
-		"l.and   %0,%0,%1      \n\t"  /* Set us to low */
-		"l.mtspr r0,%0,0x4801  \n\t"  /* Write back to PICPR */
-		: "=r" (tmp), "=r" (tmp2));
-
-  /* Install the interrupt handler */
-  asm volatile ("l.mfspr %0,r0,0x11 \n\t"
-		"l.addi  %1,r0,-5   \n\t"
-		"l.and   %1,%1,%0   \n\t"
-		"l.mtspr r0,%1,0x11 \n\t": "=&r" (sr) : "r" (tmp));
-
-  old_handler = (void(*)(unsigned int,unsigned int,unsigned int,unsigned int))
-    Or1k_Interrupt_Vectors[5];
-  Or1k_Interrupt_Vectors[5] = (uint32_t)console_interrupt;
-
-  asm volatile ("l.mtspr r0,%0,0x11\n\t":: "r" (sr));
-
-  /* Assume 1843.2/16 kHz clock */
-  uart->latch.LCR = 0x80;    /* Set the divisor latch bit */
-  uart->latch.DLM = 2;       /* 57,600 */
-  uart->latch.DLL = 0;
-  uart->write.LCR = 0x03;    /* 8-N-1 */
-  uart->write.MCR = 0x03;    /* Assert RTS & DTR */
-  /* uart->write.FCR = 0x00; */ /* Make sure we're in 16450 mode... Ignore for 16450 driver */
-  uart->write.IER = 0x05;    /* Don't worry about TEMT unless we need to. */
-
-  tmp = uart->read.LSR;     /* Make sure interrupts are cleared */
-  tmp = uart->read.RBR;     /* Clear the input buffer */
-  tmp = uart->read.MSR;     /* Clear the modem status register */
-
-  localEcho = 1;       /* Turn on local echo */
-
-  status = rtems_io_register_name(
-    "/dev/console",
-    major,
-    (rtems_device_minor_number) 0
-  );
-
-  if (status != RTEMS_SUCCESSFUL)
-    rtems_fatal_error_occurred(status);
-
-  return RTEMS_SUCCESSFUL;
-}
-
-/*  is_character_ready
- *
- *  This routine returns TRUE if a character is available.
- *
- *  Input parameters: NONE
- *
- *  Output parameters:  NONE
- *
- *  Return values:
- */
-
-rtems_boolean is_character_ready(
-  char *ch
-)
-{
-  *ch = '\0';   /* return NULL for no particular reason */
-  return(TRUE);
-}
-
-/*  inbyte
- *
- *  This routine reads a character from the SOURCE.
- *
- *  Input parameters: NONE
- *
- *  Output parameters:  NONE
- *
- *  Return values:
- *    character read from SOURCE
- */
-
-char inbyte( void )
-{
-  unsigned int stat;
-
-  stat = uart->read.LSR;
-  while(!(stat & 0x01))  /* ! Data Ready */
-    {
-      rtems_task_wake_after( RTEMS_YIELD_PROCESSOR );
-      stat = uart->read.LSR;
-    }
-
-  return uart->read.RBR;   /* Return the character */
-}
-
-/*  outbyte
- *
- *  This routine transmits a character out the SOURCE.  Flow
- *  control is not currently enabled.
- *
- *  Input parameters:
- *    ch  - character to be transmitted
- *
- *  Output parameters:  NONE
- */
-
-void outbyte(char ch)
-{
-  unsigned int stat;
-  /*
-   *  Carriage Return/New line translation.
-   */
-
-  stat = uart->read.LSR;
-  while(!(stat & 0x40))  /* ! TEMT */
-    {
-      rtems_task_wake_after( RTEMS_YIELD_PROCESSOR );
-      stat = uart->read.LSR;
-    }
-
-  uart->write.THR = ch;
-  if ( ch == '\n' )
-    outbyte( '\r' );
-}
-
-/*
- *  Open entry point
- */
-
-rtems_device_driver console_open(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return RTEMS_SUCCESSFUL;
-}
-
-/*
- *  Close entry point
- */
-
-rtems_device_driver console_close(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  return RTEMS_SUCCESSFUL;
-}
-
-/*
- * read bytes from the serial port. We only have stdin.
- */
-
-rtems_device_driver console_read(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  rtems_libio_rw_args_t *rw_args;
-  char *buffer;
-  int maximum;
-  int count = 0;
-
-  rw_args = (rtems_libio_rw_args_t *) arg;
-
-  buffer = rw_args->buffer;
-  maximum = rw_args->count;
-
-  for (count = 0; count < maximum; count++)
-    {
-      buffer[ count ] = inbyte();
-
-      if (buffer[ count ] == '\n' || buffer[ count ] == '\r')
-	{
-	  buffer[ count++ ]  = '\n';
-	  if(localEcho)
-	    outbyte('\n' ); /* newline */
-	  break;  /* Return for a newline */
-	}
-      else if (buffer[ count ] == '\b' && count > 0 )
-	{
-	  if(localEcho)
-	    {
-	      outbyte('\b' ); /* move back one space */
-	      outbyte(' ' ); /* erase the character */
-	      outbyte('\b' ); /* move back one space */
-	    }
-	  count-=2;
-	}
-      else if(localEcho)
-	outbyte(buffer[ count ]); /* echo the character */
-    }
-
-  rw_args->bytes_moved = count;
-  return (count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED;
-}
-
-/*
- * write bytes to the serial port. Stdout and stderr are the same.
- */
-
-rtems_device_driver console_write(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  int count;
-  int maximum;
-  rtems_libio_rw_args_t *rw_args;
-  char *buffer;
-
-  rw_args = (rtems_libio_rw_args_t *) arg;
-
-  buffer = rw_args->buffer;
-  maximum = rw_args->count;
-
-  for (count = 0; count < maximum; count++) {
-    if ( buffer[ count ] == '\n') {
-      outbyte('\r');
-    }
-    outbyte( buffer[ count ] );
-  }
-
-  rw_args->bytes_moved = maximum;
-  return 0;
-}
-
-/*
- *  IO Control entry point
- */
-
-rtems_device_driver console_control(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void                    * arg
-)
-{
-  int param,div;
-  ConsoleIOCTLRequest* request = (ConsoleIOCTLRequest*)arg;
-
-  if (!arg)
-    return RTEMS_INVALID_ADDRESS;
-
-  switch(request->command)
-    {
-    case TERM_LOCAL_ECHO:
-      param = (int)(request->data);
-      if(param < 0 || param > 1)
-	return RTEMS_INVALID_NUMBER;
-      localEcho = param;
-      break;
-    case TERM_BIT_RATE:
-      param = (int)(request->data);
-      switch(param)
-	{
-	case 50:
-        case 150:
-	case 300:
-	case 600:
-	case 1200:
-	case 1800:
-	case 2000:
-	case 2400:
-	case 3600:
-	case 4800:
-	case 7200:
-	case 9600:
-	case 19200:
-	case 38400:
-	case 57600:
-	case 115200:
-	  div = 115200/param;
-	  uart->latch.LCR |= 0x80;    /* Set the divisor latch bit */
-	  uart->latch.DLM = div & 0xFF;
-	  uart->latch.DLL = div >> 8;
-	  uart->write.LCR &= 0x7F;    /* Clear the divisor latch bit */
-	  break;
-	default:
-	  return RTEMS_INVALID_NUMBER;
-	}
-      break;
-    default:
-      return RTEMS_NOT_CONFIGURED;
-    }
-
-  return RTEMS_SUCCESSFUL;
-}
Index: src/lib/libbsp/or32/orp/console/console.h
===================================================================
--- c/src/lib/libbsp/or32/orp/console/console.h	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,70 +1,0 @@
-/* console.h -- console header file for the Bender board using the
- *              Or1k architecture.
- *
- *  Copyright (C) 2001 Chris Ziomkowski, chris@asics.ws
- *
- *  This file is distributed as part of the RTEMS package from
- *  OAR Corporation, and follows the licensing and distribution
- *  terms as stated for RTEMS.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- */
-
-#ifndef _CONSOLE_H
-#define _CONSOLE_H
-
-typedef enum {
-  TERM_LOCAL_ECHO,
-  TERM_BIT_RATE,
-} ConsoleIOCTLCommand;
-
-typedef struct {
-  ConsoleIOCTLCommand command;
-  void*                data;
-} ConsoleIOCTLRequest;
-
-typedef struct {
-  unsigned char RBR;
-  unsigned char IER;
-  unsigned char IIR;
-  unsigned char LCR;
-  unsigned char MCR;
-  unsigned char LSR;
-  unsigned char MSR;
-  unsigned char SCR;
-} UART_16450_Read;
-
-typedef struct {
-  unsigned char THR;
-  unsigned char IER;
-  unsigned char IIR;
-  unsigned char LCR;
-  unsigned char MCR;
-  unsigned char LSR;
-  unsigned char MSR;
-  unsigned char SCR;
-} UART_16450_Write;
-
-typedef struct {
-  unsigned char DLM;
-  unsigned char DLL;
-  unsigned char IIR;
-  unsigned char LCR;
-  unsigned char MCR;
-  unsigned char LSR;
-  unsigned char MSR;
-  unsigned char SCR;
-} UART_16450_Latch;
-
-typedef union {
-  UART_16450_Read   read;
-  UART_16450_Write  write;
-  UART_16450_Latch  latch;
-} UART_16450;
-
-#endif
Index: src/lib/libbsp/or32/orp/include/.cvsignore
===================================================================
--- c/src/lib/libbsp/or32/orp/include/.cvsignore	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,5 +1,0 @@
-coverhd.h
-bspopts.h
-bspopts.h.in
-stamp-h
-stamp-h.in
Index: src/lib/libbsp/or32/orp/include/bsp.h
===================================================================
--- c/src/lib/libbsp/or32/orp/include/bsp.h	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,84 +1,0 @@
-/*  bsp.h
- *
- *  This include file contains all board IO definitions.
- *
- *  XXX : put yours in here
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#ifndef __ORP_h
-#define __ORP_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <bspopts.h>
-
-#include <rtems.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-
-/*
- *  confdefs.h overrides for this BSP:
- *   - number of termios serial ports (defaults to 1)
- *   - Interrupt stack space is not minimum if defined.
- */
-
-/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
-#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
-
-/*
- *  Simple spin delay in microsecond units for device drivers.
- *  This is very dependent on the clock speed of the target.
- */
-
-#define delay( microseconds ) \
-  { \
-  }
-
-/* Constants */
-
-#define RAM_START 0x10000000
-#define RAM_END   0x10800000
-
-/* miscellaneous stuff assumed to exist */
-
-extern rtems_configuration_table BSP_Configuration;
-
-/*
- *  Device Driver Table Entries
- */
-
-/*
- * NOTE: Use the standard Console driver entry
- */
-
-/*
- * NOTE: Use the standard Clock driver entry
- */
-
-/* functions */
-
-void bsp_cleanup( void );
-
-no_cpu_isr_entry set_vector(                    /* returns old vector */
-  rtems_isr_entry     handler,                  /* isr routine        */
-  rtems_vector_number vector,                   /* vector number      */
-  int                 type                      /* RTEMS or RAW intr  */
-);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-/* end of include file */
Index: src/lib/libbsp/or32/orp/include/tm27.h
===================================================================
--- c/src/lib/libbsp/or32/orp/include/tm27.h	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,32 +1,0 @@
-/*
- *  tm27.h
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#ifndef _RTEMS_TMTEST27
-#error "This is an RTEMS internal file you must not include directly."
-#endif
-
-#ifndef __tm27_h
-#define __tm27_h
-
-/*
- *  Stuff for Time Test 27
- */
-
-#define MUST_WAIT_FOR_INTERRUPT 0
-
-#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )
-
-#define Cause_tm27_intr() /* empty */
-
-#define Clear_tm27_intr() /* empty */
-
-#define Lower_tm27_intr() /* empty */
-
-#endif
Index: src/lib/libbsp/or32/orp/start/start.S
===================================================================
--- c/src/lib/libbsp/or32/orp/start/start.S	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,799 +1,0 @@
-/* start.S -- bootup code for the Bender board using the Or1k
- *            architecture.
- *
- *  Copyright (C) 2001 Chris Ziomkowski, chris@asics.ws
- *
- *  This file is distributed as part of the RTEMS package from
- *  OAR Corporation, and follows the licensing and distribution
- *  terms as stated for RTEMS.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- */
-
-#include <rtems/asm.h>
-
-/* Since we don't yet have a memory map for Bender, I am
-   assuming the following. Hopefully, this will be easily
-   modified once we get the real values.
-
-   0x00000000 - 0x00200000:    Flash/ROM (boot code / 2 MB)
-   0x01000000 - 0x010FFFFF:    Synchronous SRAM (area 2 / 1 MB)
-   0x10000000 - 0x1FFFFFFF:    External SDRAM (area 3 / 256 MB)
-   0x20000000 - 0x2FFFFFFF:    External SDRAM (area 4 / 256 MB)
-
-   0x80000000 - 0x8000001F:    4 16550 UART controllers
-   0x80010000 - 0x80017FFF:    Internal Bender RAM
-   0x80020000 - 0xFFFFFFFF:    Memory mapped Bender Peripherals
-
-   For this version, I assume that only the flash and 32 MB
-   of RAM in area 3 are populated. Everything else should
-   return a bus error when accessed.
-*/
-.file	"start.S"
-
-.data
-	PUBLIC(Or1k_Interrupt_Vectors)
-SYM (Or1k_Interrupt_Vectors):
-	.word	0x00000000			# No Vector
-	.word	_start				# Reset Vector (Ignored)
-	.word	__Internal_error_Occurred	# Bus Error
-	.word	__Internal_error_Occurred	# Data Page Fault
-	.word	__Internal_error_Occurred	# Instruction Page Fault
-	.word	__int_reenable			# Low Priority Interrupt
-	.word	__Internal_error_Occurred	# Alignment Exception
-	.word	__Internal_error_Occurred	# Illegal Instruction Exception
-	.word	__int_reenable			# High Priority Interrupt
-	.word	__Internal_error_Occurred	# ITBL Miss
-	.word	__Internal_error_Occurred	# DTBL Miss
-	.word	0x00000000			# Range Exception
-	.word	0x00000000			# System Call
-	.word	0x00000000			# Breakpoint
-	.word	0x00000000			# Trap
-
-/*
-	PUBLIC(BOTTOM_OF_MEMORY)
-SYM (BOTTOM_OF_MEMORY):
-	.word	0x10000000       # Assume RAM @ 0 for the sim
-
-	PUBLIC(TOP_OF_MEMORY)
-SYM (TOP_OF_MEMORY):
-	.word	0x10800000	# Assume RAM @ 0 for the sim
-*/
-	PUBLIC(_mem_end)
-SYM (_mem_end):
-	.word	0x10800000
-
-        BEGIN_CODE
-	.org	0x0
-	/**************/
-	/*   _panic   */
-	/**************/
-
-	/* Place the panic vector at 0 */
-
-.proc	__panic
-	.def	__panic
-	.val	__panic
-	.scl	2
-	.type	044
-	.endef
-	.global	__panic
-__panic:
-
-	l.jal		__exit
-	l.nop
-
-.endproc __panic
-	.def	__panic
-	.val	.
-	.scl	-1
-	.endef
-
-	/* Exception processing...first, we will save the
-	   16 non callee saved registers which could be
-	   corrupted by calling a C function. We have no
-	   way of knowing which of these will be used, so
-	   we have to save all of them. We will then save
-	   the EPCR and ESR, in case a nested exception is
-	   called. Next, we call the user function. We then
-	   restore all the registers to their original
-	   values, and finally disable exceptions, restore
-	   EPCR and ESR (EEAR is not essential to restore)
-	   and then return from the interrupt. */
-
-	/******************************************/
-	/*       Normal exception handling        */
-        /* Called with 80 bytes allocated on the  */
-	/* stack, the vector function in r11, and */
-	/* the vector number in r3. Original      */
-	/* values at 28(r1) and 0(r1).            */
-	/******************************************/
-.proc	___standard_exception
-	.def	___standard_exception
-	.val	___standard_exception
-	.scl	2
-	.type	044
-	.endef
-	.global	___standard_exception
-___standard_exception:
-	l.sfeqi	r11,0			/* Ignore it if it is zero */
-	l.bf	L2_2
-	l.sw	4(r1),r4		/* Save r4 */
-
-	/* Ignore fast context switching in this release. */
-	/* It's poorly conceived, and will probably never */
-	/* be implemented...				  */
-
-	l.sw	8(r1),r5
-	l.sw	12(r1),r6
-	l.sw	16(r1),r7
-
-	l.mfspr	r4,r0,0x20		/* Save EPCR */
-	l.mfspr	r5,r0,0x30		/* Save EEAR */
-	l.mfspr	r6,r0,0x40		/* Save ESR */
-
-	l.mfspr	r7,r0,17
-	l.ori	r7,r7,2
-	l.mtspr	r0,r7,17		/* Reenable exceptions */
-
-	l.sw	20(r1),r8
-	l.sw	24(r1),r9
-	l.sw	32(r1),r12
-	l.sw	36(r1),r14
-	l.sw	40(r1),r16
-	l.sw	44(r1),r18
-	l.sw	48(r1),r20
-	l.sw	52(r1),r22
-	l.sw	56(r1),r24
-	l.sw	60(r1),r26
-	l.sw	64(r1),r28
-	l.sw	68(r1),r30
-	l.sw	72(r1),r4		/* Save EPCR. User could change r4 */
-
-	/* Now, call the installed handler with the arguments:
-		r3 ==> vector # (1-14)
-		r4 ==> EPCR
-		r5 ==> EEAR
-		r6 ==> ESR
-		r11 ==> User function
-	*/
-
-	l.jal	___user_function	/* Call the user routine */
-	l.sw	76(r1),r6		/* Save ESR. User could change r6 */
-					/* Ignore r5 (EEAR). It is not critical for state */
-
-	l.lwz	r30,68(r1)
-	l.lwz	r28,64(r1)
-	l.lwz	r26,60(r1)
-	l.lwz	r24,56(r1)
-	l.lwz	r22,52(r1)
-	l.lwz	r20,48(r1)
-	l.lwz	r18,44(r1)
-	l.lwz	r16,40(r1)
-	l.lwz	r14,36(r1)
-	l.lwz	r12,32(r1)
-	l.lwz	r9,24(r1)
-	l.lwz	r8,20(r1)
-	l.lwz	r7,16(r1)
-	l.lwz	r5,8(r1)
-
-	l.addi	r6,r0,-3		/* Set r6 to 0xFFFFFFFD */
-	l.mfspr	r3,r0,17		/* Get SR value */
-	l.and	r3,r3,r6		/* Clear exception bit */
-	l.mfspr	r0,r3,17		/* Disable exceptions */
-
-	l.lwz	r6,76(r1)		/* Recover ESR */
-	l.lwz	r4,72(r1)		/* Recover EPCR */
-	l.mtspr	r0,r4,0x20		/* Restore ESR */
-	l.mtspr	r0,r6,0x40		/* Restore EPCR */
-	l.lwz	r6,12(r1)
-	l.lwz	r4,4(r1)
-
-L2_2:
-	l.lwz	r11,28(r1)
-	l.lwz	r3,0(r1)
-	l.addi	r1,r1,80
-	l.rfe
-	l.nop				/* The document doesn't say this is
-					   a delay slot instruction, but the
-					   simulator doesn't work without this. */
-
-.endproc ___standard_exception
-	.def	___standard_exception
-	.val	.
-	.scl	-1
-	.endef
-
-/****************************************************************************/
-/* These constants must be in .text section in order to be                  */
-/* properly addressed in code.                                              */
-
-        PUBLIC(BOTTOM_OF_MEMORY)
-SYM (BOTTOM_OF_MEMORY):
-        .word   0x10000000       # Assume RAM @ 0 for the sim
-
-        PUBLIC(TOP_OF_MEMORY)
-SYM (TOP_OF_MEMORY):
-        .word   0x10800000      # Assume RAM @ 0 for the sim
-
-/****************************************************************************/
-
-	/** Currently, about 57 of the 64 valid address locations
-	    are being used here. If you add code to the above
-	    routine, make sure it isn't more than 7 instructions
-	    or you will overflow into the reset vector. **/
-
-	/****************************/
-	/* Reset vector static code */
-	/****************************/
-	.org	0x100
-.proc	___rst
-	.global	___rst
-___rst:
-	/* Set the stack pointer */
-	l.movhi		r1,hi(_TOP_OF_MEMORY)
-	l.ori		r1,r1,lo(_TOP_OF_MEMORY)
-	l.lwz		r1,0(r1)   /* Dereference it */
-
-	/* Set the frame pointer */
-	l.add		r2,r0,r1
-
-        l.mfspr         r3,r0,17	/* Get SR value */
-        l.ori           r3,r3,2         /* Set exception enable bit */
-        l.j             _start          /* Jump to main routine */
-        l.mtspr         r0,r3,17        /* Enable exceptions (DELAY) */
-.endproc ___rst
-
-	/***********************************************************/
-	/* Note:  right after the reset vector, we are going to    */
-	/* place a table with the necessary values to initialize   */
-	/* the memory controller. This pointer will be set and     */
-	/* passed to the _start routine in r4. The first thing the */
-	/* the _start routine will do is to initialize the memory  */
-	/* controller. The code to initialze the memory controller */
-	/* is expected to be larger than the 50 some odd           */
-	/* instructions that are remaining here before the bus     */
-	/* error vector, which is why it is left to the _start     */
-	/* routine.                                                */
-	/***********************************************************/
-
-	/********************************/
-	/* Bus Error vector static code */
-	/********************************/
-	.org	0x200
-.proc	___bus_error
-	.global	___bus_error
-___bus_error:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,8(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,2
-
-.endproc ___bus_error
-
-	/* Put _Internal_error_Occurred and _int_reenable here */
-	/* No reason to waste space...it'll be filled with 0 if */
-	/* we don't... */
-
-	/********************************/
-	/*   _Internal_error_Occurred   */
-	/********************************/
-
-.proc	__Internal_error_Occurred
-	.def	__Internal_error_Occurred
-	.val	__Internal_error_Occurred
-	.scl	2
-	.type	044
-	.endef
-	.global	__Internal_error_Occurred
-__Internal_error_Occurred:
-
-	l.jal		__panic
-	l.nop
-
-.endproc __Internal_error_Occurred
-	.def	__Internal_error_Occurred
-	.val	.
-	.scl	-1
-	.endef
-
-	/*********************/
-	/*   _int_reenable   */
-	/*********************/
-
-.proc	__int_reenable
-	.def	__int_reenable
-	.val	__int_reenable
-	.scl	2
-	.type	044
-	.endef
-	.global	__int_reenable
-__int_reenable:
-
-	l.mfspr	r11,r0,17
-	l.ori	r11,r11,0x04
-	l.jr	r9
-	l.mtspr r0,r11,17
-
-.endproc __int_reenable
-	.def	__int_reenable
-	.val	.
-	.scl	-1
-	.endef
-
-	/*********************&**/
-	/*   ___user_function   */
-	/************************/
-
-.proc	___user_function
-	.def	___user_function
-	.val	___user_function
-	.scl	2
-	.type	044
-	.endef
-	.global	___user_function
-___user_function:
-
-	/* r11 contains the address to call. We can
-	   modify r7, r8, r12, and r14 at will */
-
-	l.movhi	r7,hi(__Thread_Dispatch_disable_level)
-	l.ori	r7,r7,lo(__Thread_Dispatch_disable_level)
-	l.lwz	r8,0(r7)
-
-	l.addi	r1,r1,-8	#  Stack must be DWORD aligned
-	l.sw	0(r1),r9	#  Save the return address
-
-	l.addi	r8,r8,1		# Increment __Thread_Dispatch...
-	l.jalr	r11
-	l.sw	0(r7),r8	# Disable thread dispatching
-
-	/* Now, we need to determine if we need to
-	   service the RTEMS environment. RTEMS tries
-	   to draw a distinction between a RAW handler
-	   (where this isn't necessary) and an RTEMS
-	   handler. However, it appears almost all ISR's
-	   will not be RAW under this definition, and
-	   those that are will not honestly be hurt by
-	   the 20 or so extra cycles it will take to do
-	   the following code. If there is a very frequent
-	   interrupt, then it should probably be hard
-	   coded into the static routine anyway, rather
-	   than suffer the hit of calling it indirectly */
-
-	/* Note:  RTEMS recommends incrementing and
-	   decrementing the _ISR_Nest_Level as well.
-	   We are specifically not doing this because
-	   in the Or1k architecture it is impossible
-	   to nest interrupts. Interrupts must run to
-	   completion before reenabling. If there is a
-	   significant task to be done, then it should
-	   run in a bottom half handler, similar to the
-	   way Linux works. In theory though, even if
-	   we do allow nested interrupts, there is no
-	   reason for this flag, as it seems to be for
-	   the purpose of restoring the normal stack in
-	   place of the interrupt stack. We don't use a
-	   separate exception stack, so this should not
-	   be an issue for us. */
-
-	l.movhi	r7,hi(__Thread_Dispatch_disable_level)
-	l.ori	r7,r7,lo(__Thread_Dispatch_disable_level)
-	l.lwz	r8,0(r7)
-	l.addi	r8,r8,-1	# Decrement __Thread_Dispatch...
-	l.sw	0(r7),r8	# Memory stall likely here...
-
-	l.sfeqi	r8,0		# Skip if _Thread_Dispatch != 0
-	l.bnf	L4_2
-	l.movhi	r7,hi(__Context_Switch_necessary)
-
-	l.ori	r7,r7,lo(__Context_Switch_necessary)
-	l.lwz	r8,0(r7)
-
-	l.movhi	r7,hi(__ISR_Signals_to_thread_executing)
-	l.ori	r7,r7,lo(__ISR_Signals_to_thread_executing)
-	l.lwz	r12,0(r7)
-
-	l.sfeqi	r8,0		# Skip if __Context... is false
-	l.bf	L4_2
-	l.movhi	r14,hi(__Thread_Dispatch)
-
-	l.sfeqi	r12,0		# Skip if __ISR... is true
-	l.bnf	L4_2
-	l.ori	r14,r14,lo(__Thread_Dispatch)
-
-	l.jalr	r14
-	l.sw	0(r7),r0	# Set __ISR... to false
-
-L4_2:
-	l.lwz	r9,0(r1)	#  Recover the return address
-	l.jr	r9
-	l.addi	r1,r1,8		#  Reset the stack
-
-.endproc ___user_function
-	.def	___user_function
-	.val	.
-	.scl	-1
-	.endef
-
-	/* Code wasted between here and 0x300 */
-
-	/**************************************/
-	/* Data Page Fault vector static code */
-	/**************************************/
-	.org	0x300
-.proc	___data_page_fault
-	.global	___data_page_fault
-___data_page_fault:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,12(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,3
-.endproc ___data_page_fault
-
-	/* Code wasted between here and 0x400 */
-
-	/*********************************************/
-	/* Instruction Page Fault vector static code */
-	/*********************************************/
-	.org	0x400
-.proc	___insn_page_fault
-	.global	___insn_page_fault
-___insn_page_fault:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,16(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,4
-.endproc ___insn_page_fault
-
-	/* Code wasted between here and 0x500 */
-
-	/**************************************/
-	/* Low Priority Interrupt static code */
-	/**************************************/
-	.org	0x500
-.proc	___low_priority_int
-	.global	___low_priority_int
-___low_priority_int:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.mfspr	r3,r0,17			# Get the SR
-	l.addi	r11,r0,-5			# r11 = 0xFFFFFFFB
-	l.and	r11,r11,r3			# Clear the EIR bit
-	l.mtspr	r0,r11,17			# Set the SR w/o INT
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,20(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,5
-.endproc ___low_priority_int
-
-	/* Code wasted between here and 0x600 */
-
-	/******************************************/
-	/* Alignment Exception vector static code */
-	/******************************************/
-	.org	0x600
-.proc	___alignment_exception
-	.global	___alignment_exception
-___alignment_exception:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,24(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,6
-.endproc ___alignment_exception
-
-	/* Code wasted between here and 0x700 */
-
-	/******************************************/
-	/* Illegal Instruction vector static code */
-	/******************************************/
-	.org	0x700
-.proc	___illegal_instruction
-	.global	___illegal_instruction
-___illegal_instruction:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,28(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,7
-.endproc ___illegal_instruction
-
-	/* Code wasted between here and 0x800 */
-
-	/***************************************/
-	/* High Priority Interrupt static code */
-	/***************************************/
-	.org	0x800
-.proc	___high_priority_int
-	.global	___high_priority_int
-___high_priority_int:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.mfspr	r3,r0,17			# Get the SR
-	l.addi	r11,r0,-5			# r11 = 0xFFFFFFFB
-	l.and	r11,r11,r3			# Clear the EIR bit
-	l.mtspr	r0,r11,17			# Set the SR w/o INT
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,32(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,8
-.endproc ___high_priority_int
-
-	/* Code wasted between here and 0x900 */
-
-	/********************************/
-	/* ITBL Miss vector static code */
-	/********************************/
-	.org	0x900
-.proc	___ITBL_miss_exception
-	.global	___ITBL_miss_exception
-___ITBL_miss_exception:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,36(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,9
-.endproc ___ITBL_miss_exception
-
-	/* Code wasted between here and 0xA00 */
-
-	/********************************/
-	/* DTBL Miss vector static code */
-	/********************************/
-	.org	0xA00
-.proc	___DTBL_miss_exception
-	.global	___DTBL_miss_exception
-___DTBL_miss_exception:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,40(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,10
-.endproc ___DTBL_miss_exception
-
-	/* Code wasted between here and 0xB00 */
-
-	/**************************************/
-	/* Range Exception vector static code */
-	/**************************************/
-	.org	0xB00
-.proc	___range_exception
-	.global	___range_exception
-___range_exception:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,44(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,11
-.endproc ___range_exception
-
-	/* Code wasted between here and 0xC00 */
-
-	/**********************************/
-	/* System Call vector static code */
-	/**********************************/
-	.org	0xC00
-.proc	___system_call
-	.global	___system_call
-___system_call:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,48(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,12
-.endproc ___system_call
-
-	/* Code wasted between here and 0xD00 */
-
-	/**********************************/
-	/* Breakpoint vector static code */
-	/**********************************/
-	.org	0xD00
-.proc	___breakpoint
-	.global	___breakpoint
-___breakpoint:
-
-	/* In keeping with the necessary requirements for
-	   gdb to work, we are limiting this vector to
-	   only 2 statements, which effect an immediate
-	   return. At a later date, we may insert a debug
-	   monitor here that will do even more, but for
-	   now, this is all we want. */
-	l.rfe
-	l.nop
-
-.endproc ___breakpoint
-
-	/* Code wasted between here and 0xE00 */
-
-	/*************************************/
-	/* Trap Exception vector static code */
-	/*************************************/
-	.org	0xE00
-.proc	___trap_exception
-	.global	___trap_exception
-___trap_exception:
-	l.addi	r1,r1,-80
-	l.sw	0(r1),r3
-	l.sw	28(r1),r11
-	l.movhi	r11,hi(_Or1k_Interrupt_Vectors)
-	l.ori	r11,r11,lo(_Or1k_Interrupt_Vectors)
-	l.lwz	r11,56(r11)
-	l.j	___standard_exception
-	l.addi	r3,r0,14
-.endproc ___trap_exception
-
-	/* Code wasted between here and 0x2000 */
-
-	/* Exceptions from 0xF00 to 0x1F00 are not defined */
-	/* in the Or1k architecture. They should be filled */
-	/* in here for other implementations.              */
-
-	.org	0x2000		/* Start after exception vector table */
-
-	/*********************/
-	/*       start       */
-	/*********************/
-
-	/* This is where we jump to right after the reset exception
-	   handler. The system configuration information should
-	   be passed to us in a pointer in r4. Generally, the
-	   reset vector will call this routine directly, and
-	   the memory configuration information will be stored
-	   in the ROM/Flash image. It was decided no attempt
-	   would be made to automatically determine this
-	   information by probing, as the scheme would be too
-	   complex and inherently unreliable. */
-
-	/* Initialize strings and structures here */
-L_program:
-	.ascii	"RTEMS_or1k\000"
-	.align	4
-L_argv:
-	.word	L_program
-
-.proc _start
-	.def	_start
-	.val	_start
-	.scl	2
-	.type	044
-	.endef
-	.global	_start
-_start:
-
-	/* Initialize the memory controller here!
-	   Discussions with Rudi have stated that
-	   the first few bytes of the ROM image should
-	   contain a RAM map as opposed to trying to
-	   figure out what to do based on probing. This
-	   means a separate build of the OS for every
-	   possible board configuration, but there
-	   doesn't seem to be a better alternative. */
-
-	/*** FIX ME! Initialize the external memory controller! ***/
-
-	/* Move the data segment to RAM. Alternatively, we may
-	   copy the text segment as well. For now, we'll assume
-	   that the cache gives us sufficient performance that this
-	   is not necessary. It will be very easy to add this later.
-	 */
-	l.movhi		r4,hi(_etext)
-	l.ori		r4,r4,lo(_etext)
-	l.movhi		r5,hi(_BOTTOM_OF_MEMORY)
-	l.ori		r5,r5,lo(_BOTTOM_OF_MEMORY)
-	l.lwz		r5,0(r5)            # Dereference it
-/*	l.add		r5,r5,r4	    # Place it in memory above the text segment*/
-	l.movhi		r3,hi(_edata)
-	l.ori		r3,r3,lo(_edata)
-        l.movhi         r5,hi(_data_start)
-        l.ori           r5,r5,lo(_data_start)
-
-L3_0:
-	l.lwz		r6,0(r4)
-	l.addi		r5,r5,4
-	l.addi		r4,r4,4
-	l.sfeq		r3,r5
-	l.bnf		L3_0
-	l.sw		-4(r5),r6           # Minimize write after read stalls
-
-	/* Initialize the BSS segment */
-	l.movhi		r3,hi(__end)
-	l.ori		r3,r3,lo(__end)
-/*	l.sub		r3,r3,r4
-	l.add		r3,r3,r5*/
-	l.sfleu		r3,r5
-	l.bf		L3_2		   # Check for no BSS segment!
-	l.nop
-
-L3_1:
-        l.addi          r5,r5,4
-	l.sfeq		r5,r3
-	l.bnf		L3_1
-        l.sw            -4(r5),r0
-
-L3_2:
-	/* Tell everyone where the heap begins */
-	l.movhi		r4,hi(__mem_end)
-	l.ori		r4,r4,lo(__mem_end)
-	l.sw		0(r4),r5
-
-	/* Due to what I consider a bug in RTEMS, the entire
-	   heap must be zeroed. I think this is the dumbest thing
-	   I've ever heard, but whatever turns them on. I'd rather
-	   see the code which depends on this behavior fixed. I
-	   myself have never written code which assumes zeroes
-	   will be returned from memory allocated from the heap.
-	   Anyway, if I don't do it here, I have to set a flag in
-	   the CPU structure which then will do it anyway, but
-	   from less efficient C code! Zero from here to the
-	   stack pointer... One day when I'm old and gray maybe
-	   I'll set this to random values instead and fix
-	   whatever breaks. */
-
-	l.sw		0(r5),r0
-	l.sfeq		r5,r1
-	l.bnf		L3_3
-	l.addi		r5,r5,4
-
-L3_3:
-	l.addi		r3,r0,1		/* Set argc to 1 */
-	l.movhi		r4,hi(L_argv)	/* Initialize argv */
-	l.ori		r4,r4,lo(L_argv)
-	l.addi		r5,r5,0		/* Set envp to NULL */
-
-        l.mfspr         r11,r0,17	/* Get SR value */
-        l.ori           r11,r11,0x4     /* Set interrupt enable bit */
-        l.jal           _boot_card      /* Boot up the card...run the OS */
-        l.mtspr         r0,r11,17       /* Enable exceptions (DELAY) */
-
-	/* We're done. We exited normally. Shut down. */
-	l.jal		__exit
-	l.nop
-
-.endproc _start
-	.def	_start
-	.val	.
-	.scl	-1
-	.endef
-
-	END_CODE
Index: src/lib/libbsp/or32/orp/startup/bspclean.c
===================================================================
--- c/src/lib/libbsp/or32/orp/startup/bspclean.c	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,26 +1,0 @@
-/*  bsp_cleanup()
- *
- *  This routine normally is part of start.s and usually returns
- *  control to a monitor.
- *
- *  INPUT:  NONE
- *
- *  OUTPUT: NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-#include <bsp.h>
-
-void bsp_cleanup( void )
-{
-    exit(0);
-}
Index: src/lib/libbsp/or32/orp/startup/bspstart.c
===================================================================
--- c/src/lib/libbsp/or32/orp/startup/bspstart.c	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,118 +1,0 @@
-/*
- *  This routine starts the application.  It includes application,
- *  board, and monitor specific initialization and configuration.
- *  The generic CPU dependent initialization has been performed
- *  before this routine is invoked.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  This file adapted from no_bsp board library of the RTEMS distribution.
- *  The body has been modified for the Bender Or1k implementation by
- *  Chris Ziomkowski. <chris@asics.ws>
- */
-
-#include <bsp.h>
-#include <rtems/libio.h>
-
-#include <rtems/libcsupport.h>
-
-#include <string.h>
-extern int _mem_end;
-
-/*
- *  The original table from the application and our copy of it with
- *  some changes.
- */
-
-extern rtems_configuration_table Configuration;
-
-rtems_configuration_table  BSP_Configuration;
-
-rtems_cpu_table Cpu_table;
-
-/*
- *  Use the shared implementations of the following routines
- */
-
-void bsp_postdriver_hook(void);
-void bsp_libc_init( void *, uint32_t, int );
-
-/*
- *  Function:   bsp_pretasking_hook
- *  Created:    95/03/10
- *
- *  Description:
- *      BSP pretasking hook.  Called just before drivers are initialized.
- *      Used to setup libc and install any BSP extensions.
- *
- *  NOTES:
- *      Must not use libc (to do io) from here, since drivers are
- *      not yet initialized.
- *
- */
-
-void bsp_pretasking_hook(void)
-{
-    uint32_t                heap_start;
-
-    heap_start = (uint32_t) _mem_end;
-    if (heap_start & (CPU_ALIGNMENT-1))
-        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
-
-    bsp_libc_init((void *) heap_start, 64 * 1024, 0);
-
-#ifdef RTEMS_DEBUG
-    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
-#endif
-}
-
-/*
- *  bsp_start
- *
- *  This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
-  /*
-   *  Allocate the memory for the RTEMS Work Space.  This can come from
-   *  a variety of places: hard coded address, malloc'ed from outside
-   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
-   *  typically done by stock BSPs) by subtracting the required amount
-   *  of work space from the last physical address on the CPU board.
-   */
-
-  /*
-   *  Need to "allocate" the memory for the RTEMS Workspace and
-   *  tell the RTEMS configuration where it is.  This memory is
-   *  not malloc'ed.  It is just "pulled from the air".
-   */
-
-  BSP_Configuration.work_space_start = _mem_end;
-  _mem_end += BSP_Configuration.work_space_size + 512;
-  ( BSP_Configuration.work_space_size + 512 );
-
-  BSP_Configuration.work_space_start = (void *) ((unsigned int)((char *)BSP_Configuration.work_space_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1));
-
-  /*
-   *  initialize the CPU table for this BSP
-   */
-
-  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
-  Cpu_table.postdriver_hook = bsp_postdriver_hook;
-  Cpu_table.do_zero_of_workspace = FALSE;
-  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
-
-  /*
-   *  Start RTEMS
-   */
-
-  rtems_initialize_executive( &BSP_Configuration, &Cpu_table );
-
-  bsp_cleanup();
-}
Index: src/lib/libbsp/or32/orp/startup/linkcmds
===================================================================
--- c/src/lib/libbsp/or32/orp/startup/linkcmds	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,82 +1,0 @@
-/*
- *  This file contains directives for the GNU linker which are specific
- *  to the NO_CPU NO_BSP BOARD.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-MEMORY
-	{
-	    flash : org = 0x00000000, l = 2M
-	    ram   : org = 0x10000000, l = 32M
-	}
-
-SECTIONS
-{
-    .text : AT (0x0) {
-	text_start = . ;
-	_text_start = . ;
-	
-	*(.text)
-	. = ALIGN (16);
-	
-	/*
-	 * Special FreeBSD sysctl sections.
-	 */
-	. = ALIGN (16);
-	__start_set_sysctl_set = .;
-	*(set_sysctl_*);
-	__stop_set_sysctl_set = ABSOLUTE(.);
-	*(set_domain_*);
-	*(set_pseudo_*);
-
-	*(.eh_fram)
-	. = ALIGN (16);
-	
-	/*
-	 * C++ constructors
-	 */
-	__CTOR_LIST__ = .;
-	LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
-	*(.ctors)
-	LONG(0)
-	__CTOR_END__ = .;
-	__DTOR_LIST__ = .;
-	LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
-	*(.dtors)
-	LONG(0)
-	__DTOR_END__ = .;
-	_etext = ALIGN( 0x10 ) ;
-	. = ALIGN( 0x10) ;
-    } > flash
-    
-    .data : AT ( ADDR(.text) + SIZEOF(.text) ) {
-	data_start = . ;
-	_data_start = . ;
-	
-	*(.data)
-	
-	_edata = ALIGN( 0x10 );
-	. = ALIGN (0x10);
-    } > ram
-    
-    .bss : AT ( ADDR(.text) + SIZEOF(.text) + SIZEOF(.data) ) {
-	bss_start = .;
-	_bss_start = .;
-	
-	*(.bss)
-	*(COMMON)
-	
-	end = ALIGN( 0x10 );
-	__end = ALIGN( 0x10 );
-	. = ALIGN (0x10);
-    } > ram
-    
-}
Index: src/lib/libbsp/or32/orp/startup/setvec.c
===================================================================
--- c/src/lib/libbsp/or32/orp/startup/setvec.c	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,42 +1,0 @@
-/*  set_vector
- *
- *  This routine installs an interrupt vector on the target Board/CPU.
- *  This routine is allowed to be as board dependent as necessary.
- *
- *  INPUT:
- *    handler - interrupt handler entry point
- *    vector  - vector number
- *    type    - 0 indicates raw hardware connect
- *              1 indicates RTEMS interrupt connect
- *
- *  RETURNS:
- *    address of previous interrupt handler
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-#include <bsp.h>
-
-no_cpu_isr_entry set_vector(                    /* returns old vector */
-  rtems_isr_entry     handler,                  /* isr routine        */
-  rtems_vector_number vector,                   /* vector number      */
-  int                 type                      /* RTEMS or RAW intr  */
-)
-{
-  no_cpu_isr_entry previous_isr;
-
-  if ( type )
-    rtems_interrupt_catch( handler, vector, (rtems_isr_entry *) &previous_isr );
-  else {
-    /* XXX: install non-RTEMS ISR as "raw" interupt */
-  }
-  return previous_isr;
-}
Index: src/lib/libbsp/or32/orp/timer/timer.c
===================================================================
--- c/src/lib/libbsp/or32/orp/timer/timer.c	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,103 +1,0 @@
-/*  timer.c
- *
- *  This file manages the benchmark timer used by the RTEMS Timing Test
- *  Suite.  Each measured time period is demarcated by calls to
- *  Timer_initialize() and Read_timer().  Read_timer() usually returns
- *  the number of microseconds since Timer_initialize() exitted.
- *
- *  NOTE: It is important that the timer start/stop overhead be
- *        determined when porting or modifying this code.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-#include <bsp.h>
-
-uint32_t         Timer_interrupts;
-rtems_boolean Timer_driver_Find_average_overhead;
-
-void Timer_initialize( void )
-{
-
-  /*
-   *  Timer has never overflowed.  This may not be necessary on some
-   *  implemenations of timer but ....
-   */
-
-  Timer_interrupts = 0;
-
-  /*
-   *  Somehow start the timer
-   */
-}
-
-/*
- *  The following controls the behavior of Read_timer().
- *
- *  AVG_OVEREHAD is the overhead for starting and stopping the timer.  It
- *  is usually deducted from the number returned.
- *
- *  LEAST_VALID is the lowest number this routine should trust.  Numbers
- *  below this are "noise" and zero is returned.
- */
-
-#define AVG_OVERHEAD      0  /* It typically takes X.X microseconds */
-                             /* (Y countdowns) to start/stop the timer. */
-                             /* This value is in microseconds. */
-#define LEAST_VALID       1  /* Don't trust a clicks value lower than this */
-
-int Read_timer( void )
-{
-  uint32_t         clicks;
-  uint32_t         total;
-
-  /*
-   *  Read the timer and see how many clicks it has been since we started.
-   */
-
-  clicks = 0;   /* XXX: read some HW here */
-
-  /*
-   *  Total is calculated by taking into account the number of timer overflow
-   *  interrupts since the timer was initialized and clicks since the last
-   *  interrupts.
-   */
-
-  total = clicks * 0;
-
-  if ( Timer_driver_Find_average_overhead == 1 )
-    return total;          /* in XXX microsecond units */
-  else {
-    if ( total < LEAST_VALID )
-      return 0;            /* below timer resolution */
-  /*
-   *  Somehow convert total into microseconds
-   */
-      return (total - AVG_OVERHEAD);
-    }
-}
-
-/*
- *  Empty function call used in loops to measure basic cost of looping
- *  in Timing Test Suite.
- */
-
-rtems_status_code Empty_function( void )
-{
-  return RTEMS_SUCCESSFUL;
-}
-
-void Set_find_average_overhead(
-  rtems_boolean find_flag
-)
-{
-  Timer_driver_Find_average_overhead = find_flag;
-}
Index: src/lib/libbsp/or32/orp/timer/timerisr.c
===================================================================
--- c/src/lib/libbsp/or32/orp/timer/timerisr.c	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,36 +1,0 @@
-/*  timerisr.s
- *
- *  If required this ISR is used to bump a count of interval "overflow"
- *  interrupts which have occurred since the timer was started.  The
- *  number of overflows is taken into account in the Read_timer()
- *  routine if necessary.
- *
- *  To reduce overhead this is best to be the "rawest" hardware interupt
- *  handler you can write.  This should be the only interrupt which can
- *  occur during the measured time period.
- *
- *  NOTE:  This file is USUALLY in assembly and is LEAN AND MEAN.
- *         Any code in this isr is pure overhead which can perturb
- *         the accuracy of the Timing Test Suite.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-
-extern uint32_t         _Timer_interrupts;
-
-void timerisr( void )
-{
-  /*
-   *  _Timer_interrupts += TIMER_BETWEEN_OVERFLOWS  (usually in microseconds)
-   *  return from interrupt
-   */
-}
Index: src/lib/libbsp/or32/orp/times
===================================================================
--- c/src/lib/libbsp/or32/orp/times	(revision 7823ed9c320de3a3e0069671b15b20cf5ad3cdd8)
+++ 	(revision )
@@ -1,194 +1,0 @@
-#
-#  Timing Test Suite Results for the NO_BSP
-#
-#  NOTE: This is just a template.  The times are irrelevant since this BSP
-#        can only be compiled -- not executed.
-#
-#  $Id$
-#
-
-Board:  
-CPU: include coprocessor if applicable
-Clock Speed:
-Memory Configuration: SRAM, DRAM, cache, etc
-Wait States:
-
-Times Reported in: cycles, microseconds, etc
-Timer Source: Count Down Timer, on-CPU cycle counter, etc
-
-Column X:
-Column Y:
-
-#                          DESCRIPTION                                 A    B
-== =================================================================  ==== ====
- 1 rtems_semaphore_create                                               20
-   rtems_semaphore_delete                                               21
-   rtems_semaphore_obtain: available                                    15
-   rtems_semaphore_obtain: not available -- NO_WAIT                     15
-   rtems_semaphore_release: no waiting tasks                            16
-
- 2 rtems_semaphore_obtain: not available -- caller blocks               62
-
- 3 rtems_semaphore_release: task readied -- preempts caller             55
-
- 4 rtems_task_restart: blocked task -- preempts caller                  77
-   rtems_task_restart: ready task -- preempts caller                    70
-   rtems_semaphore_release: task readied -- returns to caller           25
-   rtems_task_create                                                    57
-   rtems_task_start                                                     31
-   rtems_task_restart: suspended task -- returns to caller              36
-   rtems_task_delete: suspended task                                    47
-   rtems_task_restart: ready task -- returns to caller                  37
-   rtems_task_restart: blocked task -- returns to caller                46
-   rtems_task_delete: blocked task                                      50
-
- 5 rtems_task_suspend: calling task                                     51
-   rtems_task_resume: task readied -- preempts caller                   49
-
- 6 rtems_task_restart: calling task                                     59
-   rtems_task_suspend: returns to caller                                18
-   rtems_task_resume: task readied -- returns to caller                 19
-   rtems_task_delete: ready task                                        50
-
- 7 rtems_task_restart: suspended task -- preempts caller                70
-
- 8 rtems_task_set_priority: obtain current priority                     12
-   rtems_task_set_priority: returns to caller                           27
-   rtems_task_mode: obtain current mode                                  5
-   rtems_task_mode: no reschedule                                        5
-   rtems_task_mode: reschedule -- returns to caller                      8
-   rtems_task_mode: reschedule -- preempts caller                       39
-   rtems_task_set_note                                                  13
-   rtems_task_get_note                                                  13
-   rtems_clock_set                                                      33
-   rtems_clock_get                                                       3
-
- 9 rtems_message_queue_create                                          110
-   rtems_message_queue_send: no waiting tasks                           37
-   rtems_message_queue_urgent: no waiting tasks                         37
-   rtems_message_queue_receive: available                               31
-   rtems_message_queue_flush: no messages flushed                       12
-   rtems_message_queue_flush: messages flushed                          16
-   rtems_message_queue_delete                                           26
-
-10 rtems_message_queue_receive: not available -- NO_WAIT                15
-   rtems_message_queue_receive: not available -- caller blocks          62
-
-11 rtems_message_queue_send: task readied -- preempts caller            72
-
-12 rtems_message_queue_send: task readied -- returns to caller          39
-
-13 rtems_message_queue_urgent: task readied -- preempts caller          72
-
-14 rtems_message_queue_urgent: task readied -- returns to caller        39
-
-15 rtems_event_receive: obtain current events                            1
-   rtems_event_receive: not available -- NO_WAIT                        12
-   rtems_event_receive: not available -- caller blocks                  56
-   rtems_event_send: no task readied                                    12
-   rtems_event_receive: available                                       12
-   rtems_event_send: task readied -- returns to caller                  24
-
-16 rtems_event_send: task readied -- preempts caller                    55
-
-17 rtems_task_set_priority: preempts caller                             62
-
-18 rtems_task_delete: calling task                                      83
-
-19 rtems_signal_catch                                                    9
-   rtems_signal_send: returns to caller                                 15
-   rtems_signal_send: signal to self                                    18
-   exit ASR overhead: returns to calling task                           22
-   exit ASR overhead: returns to preempting task                        49
-
-20 rtems_partition_create                                               35
-   rtems_region_create                                                  23
-   rtems_partition_get_buffer: available                                15
-   rtems_partition_get_buffer: not available                            13
-   rtems_partition_return_buffer                                        18
-   rtems_partition_delete                                               16
-   rtems_region_get_segment: available                                  22
-   rtems_region_get_segment: not available -- NO_WAIT                   21
-   rtems_region_return_segment: no waiting tasks                        19
-   rtems_region_get_segment: not available -- caller blocks             64
-   rtems_region_return_segment: task readied -- preempts caller         74
-   rtems_region_return_segment: task readied -- returns to caller       44
-   rtems_region_delete                                                  16
-   rtems_io_initialize                                                   2
-   rtems_io_open                                                         1
-   rtems_io_close                                                        1
-   rtems_io_read                                                         1
-   rtems_io_write                                                        1
-   rtems_io_control                                                      1
-
-21 rtems_task_ident                                                    149
-   rtems_message_queue_ident                                           145
-   rtems_semaphore_ident                                               156
-   rtems_partition_ident                                               145
-   rtems_region_ident                                                  148
-   rtems_port_ident                                                    145
-   rtems_timer_ident                                                   145
-   rtems_rate_monotonic_ident                                          145
-
-22 rtems_message_queue_broadcast: task readied -- returns to caller     42
-   rtems_message_queue_broadcast: no waiting tasks                      17
-   rtems_message_queue_broadcast: task readied -- preempts caller       78
-
-23 rtems_timer_create                                                   14
-   rtems_timer_fire_after: inactive                                     22
-   rtems_timer_fire_after: active                                       24
-   rtems_timer_cancel: active                                           15
-   rtems_timer_cancel: inactive                                         13
-   rtems_timer_reset: inactive                                          21
-   rtems_timer_reset: active                                            23
-   rtems_timer_fire_when: inactive                                      34
-   rtems_timer_fire_when: active                                        34
-   rtems_timer_delete: active                                           19
-   rtems_timer_delete: inactive                                         17
-   rtems_task_wake_when                                                 69
-
-24 rtems_task_wake_after: yield -- returns to caller                     9
-   rtems_task_wake_after: yields -- preempts caller                     45
-
-25 rtems_clock_tick                                                      4
-
-26 _ISR_Disable                                                          0
-   _ISR_Flash                                                            1
-   _ISR_Enable                                                           1
-   _Thread_Disable_dispatch                                              0
-   _Thread_Enable_dispatch                                               7
-   _Thread_Set_state                                                    11
-   _Thread_Disptach (NO FP)                                             31
-   context switch: no floating point contexts                           21
-   context switch: self                                                 10
-   context switch: to another task                                      10
-   context switch: restore 1st FP task                                  25
-   fp context switch: save idle, restore idle                           31
-   fp context switch: save idle, restore initialized                    19
-   fp context switch: save initialized, restore initialized             20
-   _Thread_Resume                                                        7
-   _Thread_Unblock                                                       7
-   _Thread_Ready                                                         9
-   _Thread_Get                                                           4
-   _Semaphore_Get                                                        2
-   _Thread_Get: invalid id                                               0
-
-27 interrupt entry overhead: returns to interrupted task                 6
-   interrupt exit overhead: returns to interrupted task                  6
-   interrupt entry overhead: returns to nested interrupt                 6
-   interrupt exit overhead: returns to nested interrupt                  5
-   interrupt entry overhead: returns to preempting task                  7
-   interrupt exit overhead: returns to preempting task                  36
-
-28 rtems_port_create                                                    16
-   rtems_port_external_to_internal                                      11
-   rtems_port_internal_to_external                                      11
-   rtems_port_delete                                                    16
-
-29 rtems_rate_monotonic_create                                          15
-   rtems_rate_monotonic_period: initiate period -- returns to caller    21
-   rtems_rate_monotonic_period: obtain status                           13
-   rtems_rate_monotonic_cancel                                          16
-   rtems_rate_monotonic_delete: inactive                                18
-   rtems_rate_monotonic_delete: active                                  20
-   rtems_rate_monotonic_period: conclude periods -- caller blocks       53
