Changeset 3afdebd in rtems-docs


Ignore:
Timestamp:
Jan 12, 2021, 11:35:58 AM (3 months ago)
Author:
Robin Mueller <robin.mueller.m@…>
Branches:
master
Children:
c87d8c2
Parents:
2032382
git-author:
Robin Mueller <robin.mueller.m@…> (01/12/21 11:35:58)
git-committer:
Gedare Bloom <gedare@…> (02/18/21 20:03:58)
Message:

STM32H7 doc update

File:
1 edited

Legend:

Unmodified
Added
Removed
  • user/bsps/arm/stm32h7.rst

    r2032382 r3afdebd  
    1212
    1313* `STM32H743I-EVAL 2 <https://www.st.com/en/evaluation-tools/stm32h743i-eval.html>`_
     14* `STM32H743ZI-Nucleo <https://www.st.com/en/evaluation-tools/nucleo-h743zi.html>`_
    1415
    1516Clock Driver
    1617------------
    1718
    18 The clock driver uses the `ARMv7-M Systick` module.
     19The clock driver uses the `ARMv7-M Systick` module. The HSE (external
     20oscillator) value can also be different for different evaluation or custom
     21boards, so it is recommended to check the default values of the BSP.
    1922
    2023Console Driver
     
    2225
    2326The console driver supports the on-chip UART and USART modules.
     27Different board variations use different GPIO pins and blocks for the default
     28communication UART and it is recommended to check whether the default
     29configuration provided is valid in the BSP.
     30
     31To specify that the BSP should be built for the STM32H743ZI-Nucleo board,
     32users can supply ``STM32H743ZI_NUCLEO = True`` to ``config.ini`` when
     33building the BSP.
     34
     35Alternatively, users can supply the configuration structs defined in ``hal.h``
     36in the application for other boards. For the console driver, the
     37``stm32h7_usartX_config`` structs are used to configure the GPIO pins and other
     38parameters. The default implementations can be found in
     39``bsps/arm/stm32ht/console`` in the RTEMS sources.
    2440
    2541Network Interface Driver
Note: See TracChangeset for help on using the changeset viewer.