Changeset 36078145 in rtems


Ignore:
Timestamp:
May 4, 2005, 10:34:18 PM (16 years ago)
Author:
Eric Norum <WENorum@…>
Branches:
4.10, 4.11, 4.8, 4.9, 5, master
Children:
e9a5718
Parents:
b3b6c41
Message:

Clarify bootstrap procedure.

File:
1 edited

Legend:

Unmodified
Added
Removed
  • c/src/lib/libbsp/m68k/uC5282/README

    rb3b6c41 r36078145  
    7070Downloading the image to the board.
    7171===================================
    72 
    7372The bootable image is generated by the make-exe target in the bsp makefile. It
    7473generates a simple stripped binary file which is downloaded over the ethernet
    7574port into RAM then executed or programmed into flash memory.
    7675
    77 1) Power up the uC5282 board. A dump of some memory map is produced
     761) Power up the uC5282 board. A dump of some memory maps is produced
    7877   followed by a prompt.
    7978
    80 2) type 'tftp<CR>'
    81 
    82 3) Run 'tftp' on your host machine:
     792) (first time only)
     80   Set the uC5282 board Internet configuration:
     81        setenv IPADDR0 www.xxx.yyy.zzz      (Your board's address)
     82        setenv NETMASK ppp.qqq.rrr.sss      (Your local network address mask)
     83        setenv HOSTNAME somename            (Your board's name)
     84
     853) Type 'tftp<CR>'
     86
     874) Run 'tftp' on your host machine:
    8388            tftp> binary
    8489            tftp> connect www.xxx.yyy.zzz      (Your ucDIMM's address)
    8590            tftp> put someFile.exe
    8691
    87 4) When the file has downloaded press the <ESC> key to terminate
     925) When the file has downloaded press the <ESC> key to terminate
    8893   the uCDIMM tftp command.
    8994
    90 5) Type 'goram<CR>' to start the downloaded program, or type 'program<CR>'
     956) Type 'goram<CR>' to start the downloaded program, or type 'program<CR>'
    9196to burn the code onto the uCDIMM flash.
    9297
     
    142147          +--------------------------------------------------+
    1431483000 0000 |  CS1* (devLib 'VME' A24 space)                   | 30FF FFFF
    144 3100 0000 |  CS2* (devLib 'VME' A32 and A16 space)           | 31FF FFFF
    145           .                                                  .
    146           .                                                  .
    147           .                                                  .
    148           |                                                 x| 3FFF FFFF
     1493100 0000 |  CS2* (devLib 'VME' A32 and A16 space)          x| 31FF FFFF
     150          .                                                  .
     151          .                                                  .
     152          .                                                  .
     153          |                                                  | 3FFF FFFF
    149154          +--------------------------------------------------+
    1501554000 0000 | Internal peripheral system (IPSBAR)              |
Note: See TracChangeset for help on using the changeset viewer.