Index: ukit/score/cpu/or16/.cvsignore
===================================================================
--- cpukit/score/cpu/or16/.cvsignore	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,14 +1,0 @@
-Makefile
-Makefile.in
-aclocal.m4
-autom4te.cache
-config.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
-missing
-mkinstalldirs
Index: ukit/score/cpu/or16/ChangeLog
===================================================================
--- cpukit/score/cpu/or16/ChangeLog	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,111 +1,0 @@
-2002-07-26	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Build libscorecpu.a instead of rtems-cpu.rel.
-
-2002-07-22	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use .$(OBJEXT) instead of .o.
-
-2002-07-05	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: RTEMS_TOP(../../../..).
-
-2002-07-03	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* rtems.c: Remove.
-	* Makefile.am: Reflect changes above.
-
-2002-07-01	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove RTEMS_PROJECT_ROOT.
-
-2002-06-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Add RTEMS_PROG_CCAS
-
-2002-06-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Use AC_CONFIG_AUX_DIR(../../../..).
-	Add AC_PROG_RANLIB.
-
-2002-06-17	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Include $(top_srcdir)/../../../automake/*.am.
-	Use ../../../aclocal.
-
-2001-04-03	Joel Sherrill <joel@OARcorp.com>
-
-	* Per PR94, all rtems/score/CPUtypes.h are named rtems/score/types.h.
-	* rtems/score/or16types.h: Removed.
-	* rtems/score/types.h: New file via CVS magic.
-	* Makefile.am, rtems/score/cpu.h: Account for name change.
-
-2002-03-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac:
-	AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
-	AM_INIT_AUTOMAKE([no-define foreign 1.6]).
-	* Makefile.am: Remove AUTOMAKE_OPTIONS.
-
-2001-02-05	Joel Sherrill <joel@OARcorp.com>
-
-	* rtems/Makefile.am, rtems/score/Makefile.am: Removed again.
-
-2002-01-28	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* rtems/Makefile.am: Removed.
-	* rtems/score/Makefile.am: Removed.
-	* configure.ac: Reflect changes above.
-	* Makefile.am: Reflect changes above.
-
-2001-12-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Add multilib support.
-
-2001-11-28	Joel Sherrill <joel@OARcorp.com>,
-
-	This was tracked as PR91.
-	* rtems/score/cpu.h: Added CPU_PROVIDES_ISR_IS_IN_PROGRESS macro which
-	is used to specify if the port uses the standard macro for this (FALSE).
-	A TRUE setting indicates the port provides its own implementation.
-
-2001-10-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Add autom4te.cache for autoconf > 2.52.
-	* configure.in: Remove.
-	* configure.ac: New file, generated from configure.in by autoupdate.
-
-2001-09-23	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* rtems/score/Makefile.am: Use 'PREINSTALL_FILES ='.
-	* Makefile.am: Use 'PREINSTALL_FILES ='.
-
-2001-02-04	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am, rtems/score/Makefile.am: 
-	Apply include_*HEADERS instead of H_FILES.
-
-2001-01-03	Joel Sherrill <joel@OARcorp.com>
-
-	* rtems/score/cpu.h: Added _CPU_Initialize_vectors().
-
-2000-11-09	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
-
-2000-11-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
-
-2000-10-25	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
-        Switch to GNU canonicalization.
-
-2000-09-04	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Include compile.am.
-
-2000-08-11	Joel Sherrill <joel@OARcorp.com>
-
-	* Shell added for or16 port based on no_cpu port with names replaced.
Index: ukit/score/cpu/or16/Makefile.am
===================================================================
--- cpukit/score/cpu/or16/Makefile.am	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,50 +1,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../../../aclocal
-
-include $(top_srcdir)/../../../automake/multilib.am
-include $(top_srcdir)/../../../automake/compile.am
-include $(top_srcdir)/../../../automake/lib.am
-
-$(PROJECT_INCLUDE)/%.h: %.h
-	$(INSTALL_DATA) $< $@
-
-$(PROJECT_INCLUDE):
-	$(mkinstalldirs) $@
-
-$(PROJECT_INCLUDE)/rtems:
-	$(mkinstalldirs) $@
-
-$(PROJECT_INCLUDE)/rtems/score:
-	$(mkinstalldirs) $@
-
-include_HEADERS= asm.h
-PREINSTALL_FILES = $(PROJECT_INCLUDE) $(include_HEADERS:%=$(PROJECT_INCLUDE)/%)
-
-include_rtems_scoredir = $(includedir)/rtems/score
-include_rtems_score_HEADERS = \
-    rtems/score/cpu.h \
-    rtems/score/types.h \
-    rtems/score/or16.h \
-    rtems/score/cpu_asm.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/rtems/score \
-    $(include_rtems_score_HEADERS:%.h=$(PROJECT_INCLUDE)/%.h)
-
-C_FILES = cpu.c cpu_asm.c
-C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.$(OBJEXT))
-
-LIB = $(ARCH)/libscorecpu.a
-
-libscorecpu_a_OBJECTS = $(C_O_FILES)
-
-$(LIB): $(libscorecpu_a_OBJECTS)
-	$(make-library)
-
-all-local: $(ARCH) $(PREINSTALL_FILES) $(LIB) \
-    $(TMPINSTALL_FILES)
-
-EXTRA_DIST = cpu.c cpu_asm.c
-
-include $(top_srcdir)/../../../automake/local.am
Index: ukit/score/cpu/or16/asm.h
===================================================================
--- cpukit/score/cpu/or16/asm.h	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,101 +1,0 @@
-/*  asm.h
- *
- *  This include file attempts to address the problems
- *  caused by incompatible flavors of assemblers and
- *  toolsets.  It primarily addresses variations in the
- *  use of leading underscores on symbols and the requirement
- *  that register names be preceded by a %.
- *
- *
- *  NOTE: The spacing in the use of these macros
- *        is critical to them working as advertised.
- *
- *  COPYRIGHT:
- *
- *  This file is based on similar code found in newlib available
- *  from ftp.cygnus.com.  The file which was used had no copyright
- *  notice.  This file is freely distributable as long as the source
- *  of the file is noted.  This file is:
- *
- *  COPYRIGHT (c) 1994-1997.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  $Id$
- */
-
-#ifndef __OR16_ASM_h
-#define __OR16_ASM_h
-
-/*
- *  Indicate we are in an assembly file and get the basic CPU definitions.
- */
-
-#ifndef ASM
-#define ASM
-#endif
-#include <rtems/score/cpuopts.h>
-#include <rtems/score/or16.h>
-
-/*
- *  Recent versions of GNU cpp define variables which indicate the
- *  need for underscores and percents.  If not using GNU cpp or
- *  the version does not support this, then you will obviously
- *  have to define these as appropriate.
- */
-
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-/* ANSI concatenation macros.  */
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-/* Use the right prefix for global labels.  */
-
-#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
-
-/* Use the right prefix for registers.  */
-
-#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
-
-/*
- *  define macros for all of the registers on this CPU
- *
- *  EXAMPLE:     #define d0 REG (d0)
- */
-
-/*
- *  Define macros to handle section beginning and ends.
- */
-
-
-#define BEGIN_CODE_DCL .text
-#define END_CODE_DCL
-#define BEGIN_DATA_DCL .data
-#define END_DATA_DCL
-#define BEGIN_CODE .text
-#define END_CODE
-#define BEGIN_DATA
-#define END_DATA
-#define BEGIN_BSS
-#define END_BSS
-#define END
-
-/*
- *  Following must be tailor for a particular flavor of the C compiler.
- *  They may need to put underscores in front of the symbols.
- */
-
-#define PUBLIC(sym) .globl SYM (sym)
-#define EXTERN(sym) .globl SYM (sym)
-
-#endif
-/* end of include file */
-
-
Index: ukit/score/cpu/or16/configure.ac
===================================================================
--- cpukit/score/cpu/or16/configure.ac	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,30 +1,0 @@
-## Process this file with autoconf to produce a configure script.
-## 
-## $Id$
-
-AC_PREREQ(2.52)
-AC_INIT([rtems-c-src-exec-score-cpu-or16],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
-AC_CONFIG_SRCDIR([cpu_asm.c])
-RTEMS_TOP(../../../..)
-AC_CONFIG_AUX_DIR(../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-
-AM_INIT_AUTOMAKE([no-define foreign 1.6])
-AM_MAINTAINER_MODE
-
-RTEMS_ENV_RTEMSCPU
-
-RTEMS_CHECK_CPU
-RTEMS_CANONICAL_HOST
-
-RTEMS_PROG_CC_FOR_TARGET
-RTEMS_PROG_CCAS
-RTEMS_CANONICALIZE_TOOLS
-AC_PROG_RANLIB
-
-RTEMS_CHECK_NEWLIB
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
Index: ukit/score/cpu/or16/cpu.c
===================================================================
--- cpukit/score/cpu/or16/cpu.c	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,185 +1,0 @@
-/*
- *  XXX CPU Dependent Source
- *
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#include <rtems/system.h>
-#include <rtems/score/isr.h>
-#include <rtems/score/wkspace.h>
-
-/*  _CPU_Initialize
- *
- *  This routine performs processor dependent initialization.
- *
- *  INPUT PARAMETERS:
- *    cpu_table       - CPU table to initialize
- *    thread_dispatch - address of disptaching routine
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-
-void _CPU_Initialize(
-  rtems_cpu_table  *cpu_table,
-  void      (*thread_dispatch)      /* ignored on this CPU */
-)
-{
-  /*
-   *  The thread_dispatch argument is the address of the entry point
-   *  for the routine called at the end of an ISR once it has been
-   *  decided a context switch is necessary.  On some compilation
-   *  systems it is difficult to call a high-level language routine
-   *  from assembly.  This allows us to trick these systems.
-   *
-   *  If you encounter this problem save the entry point in a CPU
-   *  dependent variable.
-   */
-
-  _CPU_Thread_dispatch_pointer = thread_dispatch;
-
-  /*
-   *  If there is not an easy way to initialize the FP context
-   *  during Context_Initialize, then it is usually easier to
-   *  save an "uninitialized" FP context here and copy it to
-   *  the task's during Context_Initialize.
-   */
-
-  /* FP context initialization support goes here */
-
-  _CPU_Table = *cpu_table;
-}
-
-/*PAGE
- *
- *  _CPU_ISR_Get_level
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
- 
-unsigned32 _CPU_ISR_Get_level( void )
-{
-  /*
-   *  This routine returns the current interrupt level.
-   */
-
-  return 0;
-}
-
-/*PAGE
- *
- *  _CPU_ISR_install_raw_handler
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
- 
-void _CPU_ISR_install_raw_handler(
-  unsigned32  vector,
-  proc_ptr    new_handler,
-  proc_ptr   *old_handler
-)
-{
-  /*
-   *  This is where we install the interrupt handler into the "raw" interrupt
-   *  table used by the CPU to dispatch interrupt handlers.
-   */
-}
-
-/*PAGE
- *
- *  _CPU_ISR_install_vector
- *
- *  This kernel routine installs the RTEMS handler for the
- *  specified vector.
- *
- *  Input parameters:
- *    vector      - interrupt vector number
- *    old_handler - former ISR for this vector number
- *    new_handler - replacement ISR for this vector number
- *
- *  Output parameters:  NONE
- *
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_ISR_install_vector(
-  unsigned32  vector,
-  proc_ptr    new_handler,
-  proc_ptr   *old_handler
-)
-{
-   *old_handler = _ISR_Vector_table[ vector ];
-
-   /*
-    *  If the interrupt vector table is a table of pointer to isr entry
-    *  points, then we need to install the appropriate RTEMS interrupt
-    *  handler for this vector number.
-    */
-
-   _CPU_ISR_install_raw_handler( vector, new_handler, old_handler );
-
-   /*
-    *  We put the actual user ISR address in '_ISR_vector_table'.  This will
-    *  be used by the _ISR_Handler so the user gets control.
-    */
-
-    _ISR_Vector_table[ vector ] = new_handler;
-}
-
-/*PAGE
- *
- *  _CPU_Install_interrupt_stack
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Install_interrupt_stack( void )
-{
-}
-
-/*PAGE
- *
- *  _CPU_Thread_Idle_body
- *
- *  NOTES:
- *
- *  1. This is the same as the regular CPU independent algorithm.
- *
- *  2. If you implement this using a "halt", "idle", or "shutdown"
- *     instruction, then don't forget to put it in an infinite loop.
- *
- *  3. Be warned. Some processors with onboard DMA have been known
- *     to stop the DMA if the CPU were put in IDLE mode.  This might
- *     also be a problem with other on-chip peripherals.  So use this
- *     hook with caution.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Thread_Idle_body( void )
-{
-
-  for( ; ; )
-    /* insert your "halt" instruction here */ ;
-}
Index: ukit/score/cpu/or16/cpu_asm.c
===================================================================
--- cpukit/score/cpu/or16/cpu_asm.c	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,183 +1,0 @@
-/*  cpu_asm.c  ===> cpu_asm.S or cpu_asm.s
- *
- *  This file contains the basic algorithms for all assembly code used
- *  in an specific CPU port of RTEMS.  These algorithms must be implemented
- *  in assembly language
- *
- *  NOTE:  This is supposed to be a .S or .s file NOT a C file.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-/*
- *  This is supposed to be an assembly file.  This means that system.h
- *  and cpu.h should not be included in a "real" cpu_asm file.  An
- *  implementation in assembly should include "cpu_asm.h>
- */
-
-#include <rtems/system.h>
-#include <rtems/score/cpu.h>
-/* #include "cpu_asm.h> */
-
-/*
- *  _CPU_Context_save_fp_context
- *
- *  This routine is responsible for saving the FP context
- *  at *fp_context_ptr.  If the point to load the FP context
- *  from is changed then the pointer is modified by this routine.
- *
- *  Sometimes a macro implementation of this is in cpu.h which dereferences
- *  the ** and a similarly named routine in this file is passed something
- *  like a (Context_Control_fp *).  The general rule on making this decision
- *  is to avoid writing assembly language.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_save_fp(
-  void **fp_context_ptr
-)
-{
-}
-
-/*
- *  _CPU_Context_restore_fp_context
- *
- *  This routine is responsible for restoring the FP context
- *  at *fp_context_ptr.  If the point to load the FP context
- *  from is changed then the pointer is modified by this routine.
- *
- *  Sometimes a macro implementation of this is in cpu.h which dereferences
- *  the ** and a similarly named routine in this file is passed something
- *  like a (Context_Control_fp *).  The general rule on making this decision
- *  is to avoid writing assembly language.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_restore_fp(
-  void **fp_context_ptr
-)
-{
-}
-
-/*  _CPU_Context_switch
- *
- *  This routine performs a normal non-FP context switch.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_switch(
-  Context_Control  *run,
-  Context_Control  *heir
-)
-{
-}
-
-/*
- *  _CPU_Context_restore
- *
- *  This routine is generally used only to restart self in an
- *  efficient manner.  It may simply be a label in _CPU_Context_switch.
- *
- *  NOTE: May be unnecessary to reload some registers.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_restore(
-  Context_Control *new_context
-)
-{
-}
-
-/*  void __ISR_Handler()
- *
- *  This routine provides the RTEMS interrupt management.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _ISR_Handler()
-{
-   /*
-    *  This discussion ignores a lot of the ugly details in a real
-    *  implementation such as saving enough registers/state to be
-    *  able to do something real.  Keep in mind that the goal is
-    *  to invoke a user's ISR handler which is written in C and
-    *  uses a certain set of registers.
-    *
-    *  Also note that the exact order is to a large extent flexible.
-    *  Hardware will dictate a sequence for a certain subset of
-    *  _ISR_Handler while requirements for setting
-    */
-
-  /*
-   *  At entry to "common" _ISR_Handler, the vector number must be
-   *  available.  On some CPUs the hardware puts either the vector
-   *  number or the offset into the vector table for this ISR in a
-   *  known place.  If the hardware does not give us this information,
-   *  then the assembly portion of RTEMS for this port will contain
-   *  a set of distinct interrupt entry points which somehow place
-   *  the vector number in a known place (which is safe if another
-   *  interrupt nests this one) and branches to _ISR_Handler.
-   *
-   *  save some or all context on stack
-   *  may need to save some special interrupt information for exit
-   *
-   *  #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
-   *    if ( _ISR_Nest_level == 0 )
-   *      switch to software interrupt stack
-   *  #endif
-   *
-   *  _ISR_Nest_level++;
-   *
-   *  _Thread_Dispatch_disable_level++;
-   *
-   *  (*_ISR_Vector_table[ vector ])( vector );
-   *
-   *  --_ISR_Nest_level;
-   *
-   *  if ( _ISR_Nest_level )
-   *    goto the label "exit interrupt (simple case)"
-   *
-   *  #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
-   *    restore stack
-   *  #endif
-   *  
-   *  if ( !_Context_Switch_necessary )
-   *    goto the label "exit interrupt (simple case)"
-   *  
-   *  if ( !_ISR_Signals_to_thread_executing )
-   *    _ISR_Signals_to_thread_executing = FALSE;
-   *    goto the label "exit interrupt (simple case)"
-   *
-   *  call _Thread_Dispatch() or prepare to return to _ISR_Dispatch
-   *
-   *  prepare to get out of interrupt
-   *  return from interrupt  (maybe to _ISR_Dispatch)
-   *
-   *  LABEL "exit interrupt (simple case):
-   *  prepare to get out of interrupt
-   *  return from interrupt
-   */
-}
-
Index: ukit/score/cpu/or16/rtems/.cvsignore
===================================================================
--- cpukit/score/cpu/or16/rtems/.cvsignore	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: ukit/score/cpu/or16/rtems/score/.cvsignore
===================================================================
--- cpukit/score/cpu/or16/rtems/score/.cvsignore	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: ukit/score/cpu/or16/rtems/score/cpu.h
===================================================================
--- cpukit/score/cpu/or16/rtems/score/cpu.h	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,1137 +1,0 @@
-/*  cpu.h
- *
- *  This include file contains information pertaining to the XXX
- *  processor.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#ifndef __CPU_h
-#define __CPU_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rtems/score/or16.h>            /* pick up machine definitions */
-#ifndef ASM
-#include <rtems/score/types.h>
-#endif
-
-/* conditional compilation parameters */
-
-/*
- *  Should the calls to _Thread_Enable_dispatch be inlined?
- *
- *  If TRUE, then they are inlined.
- *  If FALSE, then a subroutine call is made.
- *
- *  Basically this is an example of the classic trade-off of size
- *  versus speed.  Inlining the call (TRUE) typically increases the
- *  size of RTEMS while speeding up the enabling of dispatching.
- *  [NOTE: In general, the _Thread_Dispatch_disable_level will
- *  only be 0 or 1 unless you are in an interrupt handler and that
- *  interrupt handler invokes the executive.]  When not inlined
- *  something calls _Thread_Enable_dispatch which in turns calls
- *  _Thread_Dispatch.  If the enable dispatch is inlined, then
- *  one subroutine call is avoided entirely.]
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_INLINE_ENABLE_DISPATCH       FALSE
-
-/*
- *  Should the body of the search loops in _Thread_queue_Enqueue_priority
- *  be unrolled one time?  In unrolled each iteration of the loop examines
- *  two "nodes" on the chain being searched.  Otherwise, only one node
- *  is examined per iteration.
- *
- *  If TRUE, then the loops are unrolled.
- *  If FALSE, then the loops are not unrolled.
- *
- *  The primary factor in making this decision is the cost of disabling
- *  and enabling interrupts (_ISR_Flash) versus the cost of rest of the
- *  body of the loop.  On some CPUs, the flash is more expensive than
- *  one iteration of the loop body.  In this case, it might be desirable
- *  to unroll the loop.  It is important to note that on some CPUs, this
- *  code is the longest interrupt disable period in RTEMS.  So it is
- *  necessary to strike a balance when setting this parameter.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_UNROLL_ENQUEUE_PRIORITY      TRUE
-
-/*
- *  Does RTEMS manage a dedicated interrupt stack in software?
- *
- *  If TRUE, then a stack is allocated in _ISR_Handler_initialization.
- *  If FALSE, nothing is done.
- *
- *  If the CPU supports a dedicated interrupt stack in hardware,
- *  then it is generally the responsibility of the BSP to allocate it
- *  and set it up.
- *
- *  If the CPU does not support a dedicated interrupt stack, then
- *  the porter has two options: (1) execute interrupts on the
- *  stack of the interrupted task, and (2) have RTEMS manage a dedicated
- *  interrupt stack.
- *
- *  If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
- *
- *  Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
- *  CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE.  It is
- *  possible that both are FALSE for a particular CPU.  Although it
- *  is unclear what that would imply about the interrupt processing
- *  procedure on that CPU.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE
-
-/*
- *  Does this CPU have hardware support for a dedicated interrupt stack?
- *
- *  If TRUE, then it must be installed during initialization.
- *  If FALSE, then no installation is performed.
- *
- *  If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
- *
- *  Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
- *  CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE.  It is
- *  possible that both are FALSE for a particular CPU.  Although it
- *  is unclear what that would imply about the interrupt processing
- *  procedure on that CPU.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE
-
-/*
- *  Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager?
- *
- *  If TRUE, then the memory is allocated during initialization.
- *  If FALSE, then the memory is allocated during initialization.
- *
- *  This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE
- *  or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_ALLOCATE_INTERRUPT_STACK TRUE
-
-/*
- *  Does the RTEMS invoke the user's ISR with the vector number and
- *  a pointer to the saved interrupt frame (1) or just the vector 
- *  number (0)?
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_ISR_PASSES_FRAME_POINTER 0
-
-/*
- *  Does the CPU have hardware floating point?
- *
- *  If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported.
- *  If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored.
- *
- *  If there is a FP coprocessor such as the i387 or mc68881, then
- *  the answer is TRUE.
- *
- *  The macro name "OR16_HAS_FPU" should be made CPU specific.
- *  It indicates whether or not this CPU model has FP support.  For
- *  example, it would be possible to have an i386_nofp CPU model
- *  which set this to false to indicate that you have an i386 without
- *  an i387 and wish to leave floating point support out of RTEMS.
- *
- *  The CPU_SOFTWARE_FP is used to indicate whether or not there
- *  is software implemented floating point that must be context 
- *  switched.  The determination of whether or not this applies
- *  is very tool specific and the state saved/restored is also
- *  compiler specific.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#if ( OR16_HAS_FPU == 1 )
-#define CPU_HARDWARE_FP     TRUE
-#else
-#define CPU_HARDWARE_FP     FALSE
-#endif
-#define CPU_SOFTWARE_FP     FALSE
-
-/*
- *  Are all tasks RTEMS_FLOATING_POINT tasks implicitly?
- *
- *  If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed.
- *  If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed.
- *
- *  So far, the only CPU in which this option has been used is the
- *  HP PA-RISC.  The HP C compiler and gcc both implicitly use the
- *  floating point registers to perform integer multiplies.  If
- *  a function which you would not think utilize the FP unit DOES,
- *  then one can not easily predict which tasks will use the FP hardware.
- *  In this case, this option should be TRUE.
- *
- *  If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_ALL_TASKS_ARE_FP     TRUE
-
-/*
- *  Should the IDLE task have a floating point context?
- *
- *  If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task
- *  and it has a floating point context which is switched in and out.
- *  If FALSE, then the IDLE task does not have a floating point context.
- *
- *  Setting this to TRUE negatively impacts the time required to preempt
- *  the IDLE task from an interrupt because the floating point context
- *  must be saved as part of the preemption.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_IDLE_TASK_IS_FP      FALSE
-
-/*
- *  Should the saving of the floating point registers be deferred
- *  until a context switch is made to another different floating point
- *  task?
- *
- *  If TRUE, then the floating point context will not be stored until
- *  necessary.  It will remain in the floating point registers and not
- *  disturned until another floating point task is switched to.
- *
- *  If FALSE, then the floating point context is saved when a floating
- *  point task is switched out and restored when the next floating point
- *  task is restored.  The state of the floating point registers between
- *  those two operations is not specified.
- *
- *  If the floating point context does NOT have to be saved as part of
- *  interrupt dispatching, then it should be safe to set this to TRUE.
- *
- *  Setting this flag to TRUE results in using a different algorithm
- *  for deciding when to save and restore the floating point context.
- *  The deferred FP switch algorithm minimizes the number of times
- *  the FP context is saved and restored.  The FP context is not saved
- *  until a context switch is made to another, different FP task.
- *  Thus in a system with only one FP task, the FP context will never
- *  be saved or restored.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_USE_DEFERRED_FP_SWITCH       TRUE
-
-/*
- *  Does this port provide a CPU dependent IDLE task implementation?
- *
- *  If TRUE, then the routine _CPU_Thread_Idle_body
- *  must be provided and is the default IDLE thread body instead of
- *  _CPU_Thread_Idle_body.
- *
- *  If FALSE, then use the generic IDLE thread body if the BSP does
- *  not provide one.
- *
- *  This is intended to allow for supporting processors which have
- *  a low power or idle mode.  When the IDLE thread is executed, then
- *  the CPU can be powered down.
- *
- *  The order of precedence for selecting the IDLE thread body is:
- *
- *    1.  BSP provided
- *    2.  CPU dependent (if provided)
- *    3.  generic (if no BSP and no CPU dependent)
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_PROVIDES_IDLE_THREAD_BODY    TRUE
-
-/*
- *  Does the stack grow up (toward higher addresses) or down
- *  (toward lower addresses)?
- *
- *  If TRUE, then the grows upward.
- *  If FALSE, then the grows toward smaller addresses.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_STACK_GROWS_UP               TRUE
-
-/*
- *  The following is the variable attribute used to force alignment
- *  of critical RTEMS structures.  On some processors it may make
- *  sense to have these aligned on tighter boundaries than
- *  the minimum requirements of the compiler in order to have as
- *  much of the critical data area as possible in a cache line.
- *
- *  The placement of this macro in the declaration of the variables
- *  is based on the syntactically requirements of the GNU C
- *  "__attribute__" extension.  For example with GNU C, use
- *  the following to force a structures to a 32 byte boundary.
- *
- *      __attribute__ ((aligned (32)))
- *
- *  NOTE:  Currently only the Priority Bit Map table uses this feature.
- *         To benefit from using this, the data must be heavily
- *         used so it will stay in the cache and used frequently enough
- *         in the executive to justify turning this on.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_STRUCTURE_ALIGNMENT
-
-/*
- *  Define what is required to specify how the network to host conversion
- *  routines are handled.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES     FALSE
-#define CPU_BIG_ENDIAN                           TRUE
-#define CPU_LITTLE_ENDIAN                        FALSE
-
-/*
- *  The following defines the number of bits actually used in the
- *  interrupt field of the task mode.  How those bits map to the
- *  CPU interrupt levels is defined by the routine _CPU_ISR_Set_level().
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_MODES_INTERRUPT_MASK   0x00000001
-
-/*
- *  Processor defined structures
- *
- *  Examples structures include the descriptor tables from the i386
- *  and the processor control structure on the i960ca.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-/* may need to put some structures here.  */
-
-/*
- * Contexts
- *
- *  Generally there are 2 types of context to save.
- *     1. Interrupt registers to save
- *     2. Task level registers to save
- *
- *  This means we have the following 3 context items:
- *     1. task level context stuff::  Context_Control
- *     2. floating point task stuff:: Context_Control_fp
- *     3. special interrupt level context :: Context_Control_interrupt
- *
- *  On some processors, it is cost-effective to save only the callee
- *  preserved registers during a task context switch.  This means
- *  that the ISR code needs to save those registers which do not
- *  persist across function calls.  It is not mandatory to make this
- *  distinctions between the caller/callee saves registers for the
- *  purpose of minimizing context saved during task switch and on interrupts.
- *  If the cost of saving extra registers is minimal, simplicity is the
- *  choice.  Save the same context on interrupt entry as for tasks in
- *  this case.
- *
- *  Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then
- *  care should be used in designing the context area.
- *
- *  On some CPUs with hardware floating point support, the Context_Control_fp
- *  structure will not be used or it simply consist of an array of a
- *  fixed number of bytes.   This is done when the floating point context
- *  is dumped by a "FP save context" type instruction and the format
- *  is not really defined by the CPU.  In this case, there is no need
- *  to figure out the exact format -- only the size.  Of course, although
- *  this is enough information for RTEMS, it is probably not enough for
- *  a debugger such as gdb.  But that is another problem.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-typedef struct {
-    unsigned32 some_integer_register;
-    unsigned32 some_system_register;
-} Context_Control;
-
-typedef struct {
-    double      some_float_register;
-} Context_Control_fp;
-
-typedef struct {
-    unsigned32 special_interrupt_register;
-} CPU_Interrupt_frame;
-
-
-/*
- *  The following table contains the information required to configure
- *  the XXX processor specific parameters.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-typedef struct {
-  void       (*pretasking_hook)( void );
-  void       (*predriver_hook)( void );
-  void       (*postdriver_hook)( void );
-  void       (*idle_task)( void );
-  boolean      do_zero_of_workspace;
-  unsigned32   idle_task_stack_size;
-  unsigned32   interrupt_stack_size;
-  unsigned32   extra_mpci_receive_server_stack;
-  void *     (*stack_allocate_hook)( unsigned32 );
-  void       (*stack_free_hook)( void* );
-  /* end of fields required on all CPUs */
-
-}   rtems_cpu_table;
-
-/*
- *  Macros to access required entires in the CPU Table are in 
- *  the file rtems/system.h.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-/*
- *  Macros to access OR16 specific additions to the CPU Table
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-/* There are no CPU specific additions to the CPU Table for this port. */
-
-/*
- *  This variable is optional.  It is used on CPUs on which it is difficult
- *  to generate an "uninitialized" FP context.  It is filled in by
- *  _CPU_Initialize and copied into the task's FP context area during
- *  _CPU_Context_Initialize.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-SCORE_EXTERN Context_Control_fp  _CPU_Null_fp_context;
-
-/*
- *  On some CPUs, RTEMS supports a software managed interrupt stack.
- *  This stack is allocated by the Interrupt Manager and the switch
- *  is performed in _ISR_Handler.  These variables contain pointers
- *  to the lowest and highest addresses in the chunk of memory allocated
- *  for the interrupt stack.  Since it is unknown whether the stack
- *  grows up or down (in general), this give the CPU dependent
- *  code the option of picking the version it wants to use.
- *
- *  NOTE: These two variables are required if the macro
- *        CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-SCORE_EXTERN void               *_CPU_Interrupt_stack_low;
-SCORE_EXTERN void               *_CPU_Interrupt_stack_high;
-
-/*
- *  With some compilation systems, it is difficult if not impossible to
- *  call a high-level language routine from assembly language.  This
- *  is especially true of commercial Ada compilers and name mangling
- *  C++ ones.  This variable can be optionally defined by the CPU porter
- *  and contains the address of the routine _Thread_Dispatch.  This
- *  can make it easier to invoke that routine at the end of the interrupt
- *  sequence (if a dispatch is necessary).
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-SCORE_EXTERN void           (*_CPU_Thread_dispatch_pointer)();
-
-/*
- *  Nothing prevents the porter from declaring more CPU specific variables.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-/* XXX: if needed, put more variables here */
-
-/*
- *  The size of the floating point context area.  On some CPUs this
- *  will not be a "sizeof" because the format of the floating point
- *  area is not defined -- only the size is.  This is usually on
- *  CPUs with a "floating point save context" instruction.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp )
-
-/*
- *  Amount of extra stack (above minimum stack size) required by
- *  MPCI receive server thread.  Remember that in a multiprocessor
- *  system this thread must exist and be able to process all directives.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0
-
-/*
- *  This defines the number of entries in the ISR_Vector_table managed
- *  by RTEMS.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_INTERRUPT_NUMBER_OF_VECTORS      32
-#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER  (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1)
-
-/*
- *  This is defined if the port has a special way to report the ISR nesting
- *  level.  Most ports maintain the variable _ISR_Nest_level.
- */
-
-#define CPU_PROVIDES_ISR_IS_IN_PROGRESS FALSE
-
-/*
- *  Should be large enough to run all RTEMS tests.  This insures
- *  that a "reasonable" small application should not have any problems.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_STACK_MINIMUM_SIZE          (1024*4)
-
-/*
- *  CPU's worst alignment requirement for data types on a byte boundary.  This
- *  alignment does not take into account the requirements for the stack.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_ALIGNMENT              8
-
-/*
- *  This number corresponds to the byte alignment requirement for the
- *  heap handler.  This alignment requirement may be stricter than that
- *  for the data types alignment specified by CPU_ALIGNMENT.  It is
- *  common for the heap to follow the same alignment requirement as
- *  CPU_ALIGNMENT.  If the CPU_ALIGNMENT is strict enough for the heap,
- *  then this should be set to CPU_ALIGNMENT.
- *
- *  NOTE:  This does not have to be a power of 2 although it should be
- *         a multiple of 2 greater than or equal to 2.  The requirement
- *         to be a multiple of 2 is because the heap uses the least 
- *         significant field of the front and back flags to indicate
- *         that a block is in use or free.  So you do not want any odd
- *         length blocks really putting length data in that bit.
- *
- *         On byte oriented architectures, CPU_HEAP_ALIGNMENT normally will
- *         have to be greater or equal to than CPU_ALIGNMENT to ensure that
- *         elements allocated from the heap meet all restrictions.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_HEAP_ALIGNMENT         CPU_ALIGNMENT
-
-/*
- *  This number corresponds to the byte alignment requirement for memory
- *  buffers allocated by the partition manager.  This alignment requirement
- *  may be stricter than that for the data types alignment specified by
- *  CPU_ALIGNMENT.  It is common for the partition to follow the same
- *  alignment requirement as CPU_ALIGNMENT.  If the CPU_ALIGNMENT is strict
- *  enough for the partition, then this should be set to CPU_ALIGNMENT.
- *
- *  NOTE:  This does not have to be a power of 2.  It does have to
- *         be greater or equal to than CPU_ALIGNMENT.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_PARTITION_ALIGNMENT    CPU_ALIGNMENT
-
-/*
- *  This number corresponds to the byte alignment requirement for the
- *  stack.  This alignment requirement may be stricter than that for the
- *  data types alignment specified by CPU_ALIGNMENT.  If the CPU_ALIGNMENT
- *  is strict enough for the stack, then this should be set to 0.
- *
- *  NOTE:  This must be a power of 2 either 0 or greater than CPU_ALIGNMENT.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_STACK_ALIGNMENT        0
-
-/*
- *  ISR handler macros
- */
-
-/*
- *  Support routine to initialize the RTEMS vector table after it is allocated.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
- 
-#define _CPU_Initialize_vectors()
-
-/*
- *  Disable all interrupts for an RTEMS critical section.  The previous
- *  level is returned in _level.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_ISR_Disable( _isr_cookie ) \
-  { \
-    (_isr_cookie) = 0;   /* do something to prevent warnings */ \
-  }
-
-/*
- *  Enable interrupts to the previous level (returned by _CPU_ISR_Disable).
- *  This indicates the end of an RTEMS critical section.  The parameter
- *  _level is not modified.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_ISR_Enable( _isr_cookie )  \
-  { \
-  }
-
-/*
- *  This temporarily restores the interrupt to _level before immediately
- *  disabling them again.  This is used to divide long RTEMS critical
- *  sections into two or more parts.  The parameter _level is not
- * modified.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_ISR_Flash( _isr_cookie ) \
-  { \
-  }
-
-/*
- *  Map interrupt level in task mode onto the hardware that the CPU
- *  actually provides.  Currently, interrupt levels which do not
- *  map onto the CPU in a generic fashion are undefined.  Someday,
- *  it would be nice if these were "mapped" by the application
- *  via a callout.  For example, m68k has 8 levels 0 - 7, levels
- *  8 - 255 would be available for bsp/application specific meaning.
- *  This could be used to manage a programmable interrupt controller
- *  via the rtems_task_mode directive.
- *
- *  The get routine usually must be implemented as a subroutine.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_ISR_Set_level( new_level ) \
-  { \
-  }
-
-unsigned32 _CPU_ISR_Get_level( void );
-
-/* end of ISR handler macros */
-
-/* Context handler macros */
-
-/*
- *  Initialize the context to a state suitable for starting a
- *  task after a context restore operation.  Generally, this
- *  involves:
- *
- *     - setting a starting address
- *     - preparing the stack
- *     - preparing the stack and frame pointers
- *     - setting the proper interrupt level in the context
- *     - initializing the floating point context
- *
- *  This routine generally does not set any unnecessary register
- *  in the context.  The state of the "general data" registers is
- *  undefined at task start time.
- *
- *  NOTE: This is_fp parameter is TRUE if the thread is to be a floating
- *        point thread.  This is typically only used on CPUs where the
- *        FPU may be easily disabled by software such as on the SPARC
- *        where the PSR contains an enable FPU bit.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \
-                                 _isr, _entry_point, _is_fp ) \
-  { \
-  }
-
-/*
- *  This routine is responsible for somehow restarting the currently
- *  executing task.  If you are lucky, then all that is necessary
- *  is restoring the context.  Otherwise, there will need to be
- *  a special assembly routine which does something special in this
- *  case.  Context_Restore should work most of the time.  It will
- *  not work if restarting self conflicts with the stack frame
- *  assumptions of restoring a context.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_Context_Restart_self( _the_context ) \
-   _CPU_Context_restore( (_the_context) );
-
-/*
- *  The purpose of this macro is to allow the initial pointer into
- *  a floating point context area (used to save the floating point
- *  context) to be at an arbitrary place in the floating point
- *  context area.
- *
- *  This is necessary because some FP units are designed to have
- *  their context saved as a stack which grows into lower addresses.
- *  Other FP units can be saved by simply moving registers into offsets
- *  from the base of the context area.  Finally some FP units provide
- *  a "dump context" instruction which could fill in from high to low
- *  or low to high based on the whim of the CPU designers.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_Context_Fp_start( _base, _offset ) \
-   ( (void *) _Addresses_Add_offset( (_base), (_offset) ) )
-
-/*
- *  This routine initializes the FP context area passed to it to.
- *  There are a few standard ways in which to initialize the
- *  floating point context.  The code included for this macro assumes
- *  that this is a CPU in which a "initial" FP context was saved into
- *  _CPU_Null_fp_context and it simply copies it to the destination
- *  context passed to it.
- *
- *  Other models include (1) not doing anything, and (2) putting
- *  a "null FP status word" in the correct place in the FP context.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_Context_Initialize_fp( _destination ) \
-  { \
-   *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \
-  }
-
-/* end of Context handler macros */
-
-/* Fatal Error manager macros */
-
-/*
- *  This routine copies _error into a known place -- typically a stack
- *  location or a register, optionally disables interrupts, and
- *  halts/stops the CPU.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define _CPU_Fatal_halt( _error ) \
-  { \
-  }
-
-/* end of Fatal Error manager macros */
-
-/* Bitfield handler macros */
-
-/*
- *  This routine sets _output to the bit number of the first bit
- *  set in _value.  _value is of CPU dependent type Priority_Bit_map_control.
- *  This type may be either 16 or 32 bits wide although only the 16
- *  least significant bits will be used.
- *
- *  There are a number of variables in using a "find first bit" type
- *  instruction.
- *
- *    (1) What happens when run on a value of zero?
- *    (2) Bits may be numbered from MSB to LSB or vice-versa.
- *    (3) The numbering may be zero or one based.
- *    (4) The "find first bit" instruction may search from MSB or LSB.
- *
- *  RTEMS guarantees that (1) will never happen so it is not a concern.
- *  (2),(3), (4) are handled by the macros _CPU_Priority_mask() and
- *  _CPU_Priority_bits_index().  These three form a set of routines
- *  which must logically operate together.  Bits in the _value are
- *  set and cleared based on masks built by _CPU_Priority_mask().
- *  The basic major and minor values calculated by _Priority_Major()
- *  and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index()
- *  to properly range between the values returned by the "find first bit"
- *  instruction.  This makes it possible for _Priority_Get_highest() to
- *  calculate the major and directly index into the minor table.
- *  This mapping is necessary to ensure that 0 (a high priority major/minor)
- *  is the first bit found.
- *
- *  This entire "find first bit" and mapping process depends heavily
- *  on the manner in which a priority is broken into a major and minor
- *  components with the major being the 4 MSB of a priority and minor
- *  the 4 LSB.  Thus (0 << 4) + 0 corresponds to priority 0 -- the highest
- *  priority.  And (15 << 4) + 14 corresponds to priority 254 -- the next
- *  to the lowest priority.
- *
- *  If your CPU does not have a "find first bit" instruction, then
- *  there are ways to make do without it.  Here are a handful of ways
- *  to implement this in software:
- *
- *    - a series of 16 bit test instructions
- *    - a "binary search using if's"
- *    - _number = 0
- *      if _value > 0x00ff
- *        _value >>=8
- *        _number = 8;
- *
- *      if _value > 0x0000f
- *        _value >=8
- *        _number += 4
- *
- *      _number += bit_set_table[ _value ]
- *
- *    where bit_set_table[ 16 ] has values which indicate the first
- *      bit set
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#define CPU_USE_GENERIC_BITFIELD_CODE TRUE
-#define CPU_USE_GENERIC_BITFIELD_DATA TRUE
-
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Bitfield_Find_first_bit( _value, _output ) \
-  { \
-    (_output) = 0;   /* do something to prevent warnings */ \
-  }
-
-#endif
-
-/* end of Bitfield handler macros */
-
-/*
- *  This routine builds the mask which corresponds to the bit fields
- *  as searched by _CPU_Bitfield_Find_first_bit().  See the discussion
- *  for that routine.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Priority_Mask( _bit_number ) \
-  ( 1 << (_bit_number) )
-
-#endif
-
-/*
- *  This routine translates the bit numbers returned by
- *  _CPU_Bitfield_Find_first_bit() into something suitable for use as
- *  a major or minor component of a priority.  See the discussion
- *  for that routine.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE)
-
-#define _CPU_Priority_bits_index( _priority ) \
-  (_priority)
-
-#endif
-
-/* end of Priority handler macros */
-
-/* functions */
-
-/*
- *  _CPU_Initialize
- *
- *  This routine performs CPU dependent initialization.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Initialize(
-  rtems_cpu_table  *cpu_table,
-  void      (*thread_dispatch)
-);
-
-/*
- *  _CPU_ISR_install_raw_handler
- *
- *  This routine installs a "raw" interrupt handler directly into the 
- *  processor's vector table.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
- 
-void _CPU_ISR_install_raw_handler(
-  unsigned32  vector,
-  proc_ptr    new_handler,
-  proc_ptr   *old_handler
-);
-
-/*
- *  _CPU_ISR_install_vector
- *
- *  This routine installs an interrupt vector.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_ISR_install_vector(
-  unsigned32  vector,
-  proc_ptr    new_handler,
-  proc_ptr   *old_handler
-);
-
-/*
- *  _CPU_Install_interrupt_stack
- *
- *  This routine installs the hardware interrupt stack pointer.
- *
- *  NOTE:  It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK
- *         is TRUE.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Install_interrupt_stack( void );
-
-/*
- *  _CPU_Thread_Idle_body
- *
- *  This routine is the CPU dependent IDLE thread body.
- *
- *  NOTE:  It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY
- *         is TRUE.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Thread_Idle_body( void );
-
-/*
- *  _CPU_Context_switch
- *
- *  This routine switches from the run context to the heir context.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_switch(
-  Context_Control  *run,
-  Context_Control  *heir
-);
-
-/*
- *  _CPU_Context_restore
- *
- *  This routine is generally used only to restart self in an
- *  efficient manner.  It may simply be a label in _CPU_Context_switch.
- *
- *  NOTE: May be unnecessary to reload some registers.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_restore(
-  Context_Control *new_context
-);
-
-/*
- *  _CPU_Context_save_fp
- *
- *  This routine saves the floating point context passed to it.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_save_fp(
-  void **fp_context_ptr
-);
-
-/*
- *  _CPU_Context_restore_fp
- *
- *  This routine restores the floating point context passed to it.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
-
-void _CPU_Context_restore_fp(
-  void **fp_context_ptr
-);
-
-/*  The following routine swaps the endian format of an unsigned int.
- *  It must be static because it is referenced indirectly.
- *
- *  This version will work on any processor, but if there is a better
- *  way for your CPU PLEASE use it.  The most common way to do this is to:
- *
- *     swap least significant two bytes with 16-bit rotate
- *     swap upper and lower 16-bits
- *     swap most significant two bytes with 16-bit rotate
- *
- *  Some CPUs have special instructions which swap a 32-bit quantity in
- *  a single instruction (e.g. i486).  It is probably best to avoid
- *  an "endian swapping control bit" in the CPU.  One good reason is
- *  that interrupts would probably have to be disabled to insure that
- *  an interrupt does not try to access the same "chunk" with the wrong
- *  endian.  Another good reason is that on some CPUs, the endian bit
- *  endianness for ALL fetches -- both code and data -- so the code
- *  will be fetched incorrectly.
- *
- *  OR16 Specific Information:
- *
- *  XXX document implementation including references if appropriate
- */
- 
-static inline unsigned int CPU_swap_u32(
-  unsigned int value
-)
-{
-  unsigned32 byte1, byte2, byte3, byte4, swapped;
- 
-  byte4 = (value >> 24) & 0xff;
-  byte3 = (value >> 16) & 0xff;
-  byte2 = (value >> 8)  & 0xff;
-  byte1 =  value        & 0xff;
- 
-  swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4;
-  return( swapped );
-}
-
-#define CPU_swap_u16( value ) \
-  (((value&0xff) << 8) | ((value >> 8)&0xff))
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
Index: ukit/score/cpu/or16/rtems/score/cpu_asm.h
===================================================================
--- cpukit/score/cpu/or16/rtems/score/cpu_asm.h	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,70 +1,0 @@
-/*
- *  cpu_asm.h
- *
- *  Very loose template for an include file for the cpu_asm.? file
- *  if it is implemented as a ".S" file (preprocessed by cpp) instead
- *  of a ".s" file (preprocessed by gm4 or gasp).
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- *
- */
-
-#ifndef __CPU_ASM_h
-#define __CPU_ASM_h
-
-/* pull in the generated offsets */
-
-#include <rtems/score/offsets.h>
-
-/*
- * Hardware General Registers
- */
-
-/* put something here */
-
-/*
- * Hardware Floating Point Registers
- */
-
-/* put something here */
-
-/*
- * Hardware Control Registers
- */
-
-/* put something here */
-
-/*
- * Calling Convention
- */
-
-/* put something here */
-
-/*
- * Temporary registers
- */
-
-/* put something here */
-
-/*
- * Floating Point Registers - SW Conventions
- */
-
-/* put something here */
-
-/*
- * Temporary floating point registers
- */
-
-/* put something here */
-
-#endif
-
-/* end of file */
Index: ukit/score/cpu/or16/rtems/score/or16.h
===================================================================
--- cpukit/score/cpu/or16/rtems/score/or16.h	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,70 +1,0 @@
-/*  or16.h
- *
- *  This file sets up basic CPU dependency settings based on 
- *  compiler settings.  For example, it can determine if
- *  floating point is available.  This particular implementation
- *  is specified to the OPENCORES.ORG OR16 port.
- *
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- *
- */
-
-#ifndef _INCLUDE_OR16_h
-#define _INCLUDE_OR16_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- *  This file contains the information required to build
- *  RTEMS for a particular member of the OPENCORES.ORG OR16 family.
- *  It does this by setting variables to indicate which
- *  implementation dependent features are present in a particular
- *  member of the family.
- *
- *  This is a good place to list all the known CPU models
- *  that this port supports and which RTEMS CPU model they correspond
- *  to.
- */
- 
-#if defined(rtems_multilib)
-/*
- *  Figure out all CPU Model Feature Flags based upon compiler 
- *  predefines. 
- */
-
-#define CPU_MODEL_NAME  "rtems_multilib"
-#define OR16_HAS_FPU     1
-
-#elif defined(or16)
- 
-#define CPU_MODEL_NAME  "or16_model"
-#define OR16_HAS_FPU     1
- 
-#else
- 
-#error "Unsupported CPU Model"
- 
-#endif
-
-/*
- *  Define the name of the CPU family.
- */
-
-#define CPU_NAME "OPENCORES.ORG OR16"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ! _INCLUDE_OR16_h */
-/* end of include file */
Index: ukit/score/cpu/or16/rtems/score/types.h
===================================================================
--- cpukit/score/cpu/or16/rtems/score/types.h	(revision afc3a59096cc1e0e435cab6d589392ae426c7787)
+++ 	(revision )
@@ -1,56 +1,0 @@
-/*  or16types.h
- *
- *  This include file contains type definitions pertaining to the Intel
- *  or16 processor family.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#ifndef __OR16_TYPES_h
-#define __OR16_TYPES_h
-
-#ifndef ASM
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- *  This section defines the basic types for this processor.
- */
-
-typedef unsigned char  unsigned8;      /* unsigned 8-bit  integer */
-typedef unsigned short unsigned16;     /* unsigned 16-bit integer */
-typedef unsigned int   unsigned32;     /* unsigned 32-bit integer */
-typedef unsigned long long unsigned64; /* unsigned 64-bit integer */
-
-typedef unsigned16     Priority_Bit_map_control;
-
-typedef signed char      signed8;      /* 8-bit  signed integer */
-typedef signed short     signed16;     /* 16-bit signed integer */
-typedef signed int       signed32;     /* 32-bit signed integer */
-typedef signed long long signed64;     /* 64 bit signed integer */
-
-typedef unsigned32 boolean;     /* Boolean value   */
-
-typedef float          single_precision;     /* single precision float */
-typedef double         double_precision;     /* double precision float */
-
-typedef void or16_isr;
-typedef void ( *or16_isr_entry )( void );
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif  /* !ASM */
-
-#endif
-/* end of include file */
