Index: cpukit/zlib/ChangeLog
===================================================================
--- cpukit/zlib/ChangeLog	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/ChangeLog	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,73 @@
+2010-04-09	Ralf CorsÃ©pius <ralf.corsepius@rtems.org>
+
+	* zconf.h: Regenerate by zlib's configure.
+	Eliminate HAVE_UNISTD_H. Use Z_PREFIX.
+
+2010-03-28	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* zconf.h: Add include of config.h
+
+2010-03-26	Thomas Doerfler <Thomas.Doerfler@embeded-brains.de>
+
+	* zlib.h, zutil.c, zutil.h, gzlib.c, crc32.c, adler32.c:
+	Make code match prototype to eliminate warnings.
+	eliminate unneeded comilation of 64 bit functions
+
+2010-03-22	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* ChangeLog.zlib, FAQ, Makefile.am, README, adler32.c, compress.c,
+	crc32.c, deflate.c, deflate.h, infback.c, inffast.c, inflate.c,
+	inflate.h, inftrees.c, inftrees.h, trees.c, uncompr.c, zconf.h,
+	zlib.3, zlib.h, zutil.c, zutil.h: Update to zlib 1.2.4.
+	* gzclose.c, gzguts.h, gzlib.c, gzread.c, gzwrite.c, doc/algorithm.txt:
+	New files.
+	* algorithm.txt, gzio.c: Removed.
+
+2008-12-18	Joel Sherrill <joel.sherrill@oarcorp.com>
+
+	* zutil.c, zutil.h: Make code match prototype to eliminate warnings.
+
+2008-09-02	Ralf CorsÃ©pius <ralf.corsepius@rtems.org>
+
+	* adler32.c, compress.c, crc32.c, deflate.c, gzio.c, infback.c,
+	inflate.c, inffast.c, inftrees.c, trees.c, uncompr.c, zutil.c:
+	Stop using old-style function definitions.
+
+2008-09-01	Ralf CorsÃ©pius <ralf.corsepius@rtems.org>
+
+	* ChangeLog.zlib, README, adler32.c, compress.c, crc32.c, deflate.c,
+	deflate.h, gzio.c, infback.c, inflate.c, inftrees.c, inftrees.h,
+	trees.c, uncompr.c, zconf.h, zlib.3, zlib.h, zutil.c, zutil.h:
+	Upgrade to zlib-1.2.3.
+
+2005-10-30	Ralf Corsepius <ralf.corsepius@rtems.org>
+
+	* zconf.h: Hard-code using unistd.h.
+	Hard-code Z_PREFIX.
+
+2005-10-28	Ralf Corsepius <ralf.corsepius@rtems.org>
+
+	* zconf.in.h: Remove (Unused).
+	* zconf.h: Use uint_least*_t types.
+	* crc32.c, zutil.c, zutil.h: Misc. type fixes.
+
+2005-10-28	Ralf Corsepius <ralf.corsepius@rtems.org>
+
+	* Makefile.am: New.
+	* preinstall.am: New.
+
+2005-10-28	Ralf Corsepius <ralf.corsepius@rtems.org>
+
+	* adler32.c, compress.c, crc32.c, deflate.c, deflate.h, gzio.c,
+	trees.c, uncompr.c, zconf.h, zconf.in.h, zutil.c, zutil.h: Reformat
+	CVS Ids.
+
+2005-10-28	Ralf Corsepius <ralf.corsepius@rtems.org>
+
+	* ChangeLog.zlib: Renamed version of zlib's ChangeLog.
+	* FAQ, INDEX, README, adler32.c, algorithm.txt, compress.c, crc32.c,
+	crc32.h, deflate.c, deflate.h, gzio.c, infback.c, inffast.c,
+	inffast.h, inffixed.h, inflate.c, inflate.h, trees.c, trees.h,
+	uncompr.c, zconf.h, zconf.in.h, zlib.3, zlib.h, zutil.c, zutil.h,
+	inftrees.h, inftrees.c, ChangeLog: Import from zlib-1.2.2.2.tar.gz.
+
Index: cpukit/zlib/ChangeLog.zlib
===================================================================
--- cpukit/zlib/ChangeLog.zlib	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/ChangeLog.zlib	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,1130 @@
+
+                ChangeLog file for zlib
+
+Changes in 1.2.4 (14 Mar 2010)
+- Fix VER3 extraction in configure for no fourth subversion
+- Update zlib.3, add docs to Makefile.in to make .pdf out of it
+- Add zlib.3.pdf to distribution
+- Don't set error code in gzerror() if passed pointer is NULL
+- Apply destination directory fixes to CMakeLists.txt [Lowman]
+- Move #cmakedefine's to a new zconf.in.cmakein
+- Restore zconf.h for builds that don't use configure or cmake
+- Add distclean to dummy Makefile for convenience
+- Update and improve INDEX, README, and FAQ
+- Update CMakeLists.txt for the return of zconf.h [Lowman]
+- Update contrib/vstudio/vc9 and vc10 [Vollant]
+- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
+- Apply license and readme changes to contrib/asm686 [Raiter]
+- Check file name lengths and add -c option in minigzip.c [Li]
+- Update contrib/amd64 and contrib/masmx86/ [Vollant]
+- Avoid use of "eof" parameter in trees.c to not shadow library variable
+- Update make_vms.com for removal of zlibdefs.h [Zinser]
+- Update assembler code and vstudio projects in contrib [Vollant]
+- Remove outdated assembler code contrib/masm686 and contrib/asm586
+- Remove old vc7 and vc8 from contrib/vstudio
+- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
+- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
+- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
+- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
+- Fix bug in void-returning vsprintf() case in gzwrite.c
+- Fix name change from inflate.h in contrib/inflate86/inffas86.c
+- Check if temporary file exists before removing in make_vms.com [Zinser]
+- Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
+
+Changes in 1.2.3.9 (21 Feb 2010)
+- Expunge gzio.c
+- Move as400 build information to old
+- Fix updates in contrib/minizip and contrib/vstudio
+- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
+- Delete zconf.h (made by configure) [Weigelt]
+- Change zconf.in.h to zconf.h.in per convention [Weigelt]
+- Check for NULL buf in gzgets()
+- Return empty string for gzgets() with len == 1 (like fgets())
+- Fix description of gzgets() in zlib.h for end-of-file, NULL return
+- Update minizip to 1.1 [Vollant]
+- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
+- Note in zlib.h that gzerror() should be used to distinguish from EOF
+- Remove use of snprintf() from gzlib.c
+- Fix bug in gzseek()
+- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
+- Fix zconf.h generation in CMakeLists.txt [Lowman]
+- Improve comments in zconf.h where modified by configure
+
+Changes in 1.2.3.8 (13 Feb 2010)
+- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
+- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
+- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
+- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
+- Fix missing error return in gzflush(), add zlib.h note
+- Add *64 functions to zlib.map [Levin]
+- Fix signed/unsigned comparison in gz_comp()
+- Use SFLAGS when testing shared linking in configure
+- Add --64 option to ./configure to use -m64 with gcc
+- Fix ./configure --help to correctly name options
+- Have make fail if a test fails [Levin]
+- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
+- Remove assembler object files from contrib
+
+Changes in 1.2.3.7 (24 Jan 2010)
+- Always gzopen() with O_LARGEFILE if available
+- Fix gzdirect() to work immediately after gzopen() or gzdopen()
+- Make gzdirect() more precise when the state changes while reading
+- Improve zlib.h documentation in many places
+- Catch memory allocation failure in gz_open()
+- Complete close operation if seek forward in gzclose_w() fails
+- Return Z_ERRNO from gzclose_r() if close() fails
+- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
+- Return zero for gzwrite() errors to match zlib.h description
+- Return -1 on gzputs() error to match zlib.h description
+- Add zconf.in.h to allow recovery from configure modification [Weigelt]
+- Fix static library permissions in Makefile.in [Weigelt]
+- Avoid warnings in configure tests that hide functionality [Weigelt]
+- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
+- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
+- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
+- Keep object files in subdirectories to reduce the clutter somewhat
+- Remove default Makefile and zlibdefs.h, add dummy Makefile
+- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
+- Remove zlibdefs.h completely -- modify zconf.h instead
+
+Changes in 1.2.3.6 (17 Jan 2010)
+- Avoid void * arithmetic in gzread.c and gzwrite.c
+- Make compilers happier with const char * for gz_error message
+- Avoid unused parameter warning in inflate.c
+- Avoid signed-unsigned comparison warning in inflate.c
+- Indent #pragma's for traditional C
+- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
+- Correct email address in configure for system options
+- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
+- Update zlib.map [Brown]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Trk]
+- Apply various fixes to CMakeLists.txt [Lowman]
+- Add checks on len in gzread() and gzwrite()
+- Add error message for no more room for gzungetc()
+- Remove zlib version check in gzwrite()
+- Defer compression of gzprintf() result until need to
+- Use snprintf() in gzdopen() if available
+- Remove USE_MMAP configuration determination (only used by minigzip)
+- Remove examples/pigz.c (available separately)
+- Update examples/gun.c to 1.6
+
+Changes in 1.2.3.5 (8 Jan 2010)
+- Add space after #if in zutil.h for some compilers
+- Fix relatively harmless bug in deflate_fast() [Exarevsky]
+- Fix same problem in deflate_slow()
+- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
+- Add deflate_rle() for faster Z_RLE strategy run-length encoding
+- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
+- Change name of "write" variable in inffast.c to avoid library collisions
+- Fix premature EOF from gzread() in gzio.c [Brown]
+- Use zlib header window size if windowBits is 0 in inflateInit2()
+- Remove compressBound() call in deflate.c to avoid linking compress.o
+- Replace use of errno in gz* with functions, support WinCE [Alves]
+- Provide alternative to perror() in minigzip.c for WinCE [Alves]
+- Don't use _vsnprintf on later versions of MSVC [Lowman]
+- Add CMake build script and input file [Lowman]
+- Update contrib/minizip to 1.1 [Svensson, Vollant]
+- Moved nintendods directory from contrib to .
+- Replace gzio.c with a new set of routines with the same functionality
+- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
+- Update contrib/minizip to 1.1b
+- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
+
+Changes in 1.2.3.4 (21 Dec 2009)
+- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
+- Update comments in configure and Makefile.in for default --shared
+- Fix test -z's in configure [Marquess]
+- Build examplesh and minigzipsh when not testing
+- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
+- Import LDFLAGS from the environment in configure
+- Fix configure to populate SFLAGS with discovered CFLAGS options
+- Adapt make_vms.com to the new Makefile.in [Zinser]
+- Add zlib2ansi script for C++ compilation [Marquess]
+- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
+- Add AMD64 assembler code for longest match to contrib [Teterin]
+- Include options from $SFLAGS when doing $LDSHARED
+- Simplify 64-bit file support by introducing z_off64_t type
+- Make shared object files in objs directory to work around old Sun cc
+- Use only three-part version number for Darwin shared compiles
+- Add rc option to ar in Makefile.in for when ./configure not run
+- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
+- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
+- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
+- Rename Makefile.in targets allstatic to static and allshared to shared
+- Fix static and shared Makefile.in targets to be independent
+- Correct error return bug in gz_open() by setting state [Brown]
+- Put spaces before ;;'s in configure for better sh compatibility
+- Add pigz.c (parallel implementation of gzip) to examples/
+- Correct constant in crc32.c to UL [Leventhal]
+- Reject negative lengths in crc32_combine()
+- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
+- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
+- Correct typo in doc/algorithm.txt [Janik]
+- Fix bug in adler32_combine() [Zhu]
+- Catch missing-end-of-block-code error in all inflates and in puff
+    Assures that random input to inflate eventually results in an error
+- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
+- Update ENOUGH and its usage to reflect discovered bounds
+- Fix gzerror() error report on empty input file [Brown]
+- Add ush casts in trees.c to avoid pedantic runtime errors
+- Fix typo in zlib.h uncompress() description [Reiss]
+- Correct inflate() comments with regard to automatic header detection
+- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
+- Put new version of gzlog (2.0) in examples with interruption recovery
+- Add puff compile option to permit invalid distance-too-far streams
+- Add puff TEST command options, ability to read piped input
+- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
+  _LARGEFILE64_SOURCE not defined
+- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
+- Fix deflateSetDictionary() to use all 32K for output consistency
+- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
+- Clear bytes after deflate lookahead to avoid use of uninitialized data
+- Change a limit in inftrees.c to be more transparent to Coverity Prevent
+- Update win32/zlib.def with exported symbols from zlib.h
+- Correct spelling error in zlib.h [Willem]
+- Allow Z_BLOCK for deflate() to force a new block
+- Allow negative bits in inflatePrime() to delete existing bit buffer
+- Add Z_TREES flush option to inflate() to return at end of trees
+- Add inflateMark() to return current state information for random access
+- Add Makefile for NintendoDS to contrib [Costa]
+- Add -w in configure compile tests to avoid spurious warnings [Beucler]
+- Fix typos in zlib.h comments for deflateSetDictionary()
+- Fix EOF detection in transparent gzread() [Maier]
+
+Changes in 1.2.3.3 (2 October 2006)
+- Make --shared the default for configure, add a --static option
+- Add compile option to permit invalid distance-too-far streams
+- Add inflateUndermine() function which is required to enable above
+- Remove use of "this" variable name for C++ compatibility [Marquess]
+- Add testing of shared library in make test, if shared library built
+- Use ftello() and fseeko() if available instead of ftell() and fseek()
+- Provide two versions of all functions that use the z_off_t type for
+  binary compatibility -- a normal version and a 64-bit offset version,
+  per the Large File Support Extension when _LARGEFILE64_SOURCE is
+  defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
+  is defined to be 64
+- Add a --uname= option to configure to perhaps help with cross-compiling
+
+Changes in 1.2.3.2 (3 September 2006)
+- Turn off silly Borland warnings [Hay]
+- Use off64_t and define _LARGEFILE64_SOURCE when present
+- Fix missing dependency on inffixed.h in Makefile.in
+- Rig configure --shared to build both shared and static [Teredesai, Truta]
+- Remove zconf.in.h and instead create a new zlibdefs.h file
+- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
+- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
+
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [Bck]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+  [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+  trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+  gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+  Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+  doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+  that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+  un-versioned, the patch adds versioning only for symbols introduced in
+  zlib-1.2.0 or later.  It also declares as local those symbols which are
+  not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+  compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Add zran.c example of compressed data random access to examples
+  directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+  ENOUGH and MAXD -- this repairs a possible security vulnerability for
+  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
+  discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+  contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+  dynamic blocks with only literals and no distance codes --
+  Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
+Changes in 1.2.1 (17 November 2003)
+- Remove a tab in contrib/gzappend/gzappend.c
+- Update some interfaces in contrib for new zlib functions
+- Update zlib version number in some contrib entries
+- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
+- Support shared libraries on Hurd and KFreeBSD [Brown]
+- Fix error in NO_DIVIDE option of adler32.c
+
+Changes in 1.2.0.8 (4 November 2003)
+- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
+- Add experimental NO_DIVIDE #define in adler32.c
+    - Possibly faster on some processors (let me know if it is)
+- Correct Z_BLOCK to not return on first inflate call if no wrap
+- Fix strm->data_type on inflate() return to correctly indicate EOB
+- Add deflatePrime() function for appending in the middle of a byte
+- Add contrib/gzappend for an example of appending to a stream
+- Update win32/DLL_FAQ.txt [Truta]
+- Delete Turbo C comment in README [Truta]
+- Improve some indentation in zconf.h [Truta]
+- Fix infinite loop on bad input in configure script [Church]
+- Fix gzeof() for concatenated gzip files [Johnson]
+- Add example to contrib/visual-basic.txt [Michael B.]
+- Add -p to mkdir's in Makefile.in [vda]
+- Fix configure to properly detect presence or lack of printf functions
+- Add AS400 support [Monnerat]
+- Add a little Cygwin support [Wilson]
+
+Changes in 1.2.0.7 (21 September 2003)
+- Correct some debug formats in contrib/infback9
+- Cast a type in a debug statement in trees.c
+- Change search and replace delimiter in configure from % to # [Beebe]
+- Update contrib/untgz to 0.2 with various fixes [Truta]
+- Add build support for Amiga [Nikl]
+- Remove some directories in old that have been updated to 1.2
+- Add dylib building for Mac OS X in configure and Makefile.in
+- Remove old distribution stuff from Makefile
+- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
+- Update links in README
+
+Changes in 1.2.0.6 (13 September 2003)
+- Minor FAQ updates
+- Update contrib/minizip to 1.00 [Vollant]
+- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
+- Update POSTINC comment for 68060 [Nikl]
+- Add contrib/infback9 with deflate64 decoding (unsupported)
+- For MVS define NO_vsnprintf and undefine FAR [van Burik]
+- Add pragma for fdopen on MVS [van Burik]
+
+Changes in 1.2.0.5 (8 September 2003)
+- Add OF to inflateBackEnd() declaration in zlib.h
+- Remember start when using gzdopen in the middle of a file
+- Use internal off_t counters in gz* functions to properly handle seeks
+- Perform more rigorous check for distance-too-far in inffast.c
+- Add Z_BLOCK flush option to return from inflate at block boundary
+- Set strm->data_type on return from inflate
+    - Indicate bits unused, if at block boundary, and if in last block
+- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
+- Add condition so old NO_DEFLATE define still works for compatibility
+- FAQ update regarding the Windows DLL [Truta]
+- INDEX update: add qnx entry, remove aix entry [Truta]
+- Install zlib.3 into mandir [Wilson]
+- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
+- Adapt the zlib interface to the new DLL convention guidelines [Truta]
+- Introduce ZLIB_WINAPI macro to allow the export of functions using
+  the WINAPI calling convention, for Visual Basic [Vollant, Truta]
+- Update msdos and win32 scripts and makefiles [Truta]
+- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
+- Add contrib/ada [Anisimkov]
+- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
+- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
+- Add contrib/masm686 [Truta]
+- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
+  [Truta, Vollant]
+- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
+- Remove contrib/delphi2; add a new contrib/delphi [Truta]
+- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
+  and fix some method prototypes [Truta]
+- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
+  [Truta]
+- Avoid the use of backslash (\) in contrib/minizip [Vollant]
+- Fix file time handling in contrib/untgz; update makefiles [Truta]
+- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
+  [Vollant]
+- Remove contrib/vstudio/vc15_16 [Vollant]
+- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
+- Update README.contrib [Truta]
+- Invert the assignment order of match_head and s->prev[...] in
+  INSERT_STRING [Truta]
+- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
+  [Truta]
+- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
+- Fix prototype of syncsearch in inflate.c [Truta]
+- Introduce ASMINF macro to be enabled when using an ASM implementation
+  of inflate_fast [Truta]
+- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
+- Modify test_gzio in example.c to take a single file name as a
+  parameter [Truta]
+- Exit the example.c program if gzopen fails [Truta]
+- Add type casts around strlen in example.c [Truta]
+- Remove casting to sizeof in minigzip.c; give a proper type
+  to the variable compared with SUFFIX_LEN [Truta]
+- Update definitions of STDC and STDC99 in zconf.h [Truta]
+- Synchronize zconf.h with the new Windows DLL interface [Truta]
+- Use SYS16BIT instead of __32BIT__ to distinguish between
+  16- and 32-bit platforms [Truta]
+- Use far memory allocators in small 16-bit memory models for
+  Turbo C [Truta]
+- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
+  zlibCompileFlags [Truta]
+- Cygwin has vsnprintf [Wilson]
+- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
+- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
+
+Changes in 1.2.0.4 (10 August 2003)
+- Minor FAQ updates
+- Be more strict when checking inflateInit2's windowBits parameter
+- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
+- Add gzip wrapper option to deflateInit2 using windowBits
+- Add updated QNX rule in configure and qnx directory [Bonnefoy]
+- Make inflate distance-too-far checks more rigorous
+- Clean up FAR usage in inflate
+- Add casting to sizeof() in gzio.c and minigzip.c
+
+Changes in 1.2.0.3 (19 July 2003)
+- Fix silly error in gzungetc() implementation [Vollant]
+- Update contrib/minizip and contrib/vstudio [Vollant]
+- Fix printf format in example.c
+- Correct cdecl support in zconf.in.h [Anisimkov]
+- Minor FAQ updates
+
+Changes in 1.2.0.2 (13 July 2003)
+- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
+- Attempt to avoid warnings in crc32.c for pointer-int conversion
+- Add AIX to configure, remove aix directory [Bakker]
+- Add some casts to minigzip.c
+- Improve checking after insecure sprintf() or vsprintf() calls
+- Remove #elif's from crc32.c
+- Change leave label to inf_leave in inflate.c and infback.c to avoid
+  library conflicts
+- Remove inflate gzip decoding by default--only enable gzip decoding by
+  special request for stricter backward compatibility
+- Add zlibCompileFlags() function to return compilation information
+- More typecasting in deflate.c to avoid warnings
+- Remove leading underscore from _Capital #defines [Truta]
+- Fix configure to link shared library when testing
+- Add some Windows CE target adjustments [Mai]
+- Remove #define ZLIB_DLL in zconf.h [Vollant]
+- Add zlib.3 [Rodgers]
+- Update RFC URL in deflate.c and algorithm.txt [Mai]
+- Add zlib_dll_FAQ.txt to contrib [Truta]
+- Add UL to some constants [Truta]
+- Update minizip and vstudio [Vollant]
+- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
+- Expand use of NO_DUMMY_DECL to avoid all dummy structures
+- Added iostream3 to contrib [Schwardt]
+- Replace rewind() with fseek() for WinCE [Truta]
+- Improve setting of zlib format compression level flags
+    - Report 0 for huffman and rle strategies and for level == 0 or 1
+    - Report 2 only for level == 6
+- Only deal with 64K limit when necessary at compile time [Truta]
+- Allow TOO_FAR check to be turned off at compile time [Truta]
+- Add gzclearerr() function [Souza]
+- Add gzungetc() function
+
+Changes in 1.2.0.1 (17 March 2003)
+- Add Z_RLE strategy for run-length encoding [Truta]
+    - When Z_RLE requested, restrict matches to distance one
+    - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
+- Correct FASTEST compilation to allow level == 0
+- Clean up what gets compiled for FASTEST
+- Incorporate changes to zconf.in.h [Vollant]
+    - Refine detection of Turbo C need for dummy returns
+    - Refine ZLIB_DLL compilation
+    - Include additional header file on VMS for off_t typedef
+- Try to use _vsnprintf where it supplants vsprintf [Vollant]
+- Add some casts in inffast.c
+- Enchance comments in zlib.h on what happens if gzprintf() tries to
+  write more than 4095 bytes before compression
+- Remove unused state from inflateBackEnd()
+- Remove exit(0) from minigzip.c, example.c
+- Get rid of all those darn tabs
+- Add "check" target to Makefile.in that does the same thing as "test"
+- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
+- Update contrib/inflate86 [Anderson]
+- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
+- Add msdos and win32 directories with makefiles [Truta]
+- More additions and improvements to the FAQ
+
+Changes in 1.2.0 (9 March 2003)
+- New and improved inflate code
+    - About 20% faster
+    - Does not allocate 32K window unless and until needed
+    - Automatically detects and decompresses gzip streams
+    - Raw inflate no longer needs an extra dummy byte at end
+    - Added inflateBack functions using a callback interface--even faster
+      than inflate, useful for file utilities (gzip, zip)
+    - Added inflateCopy() function to record state for random access on
+      externally generated deflate streams (e.g. in gzip files)
+    - More readable code (I hope)
+- New and improved crc32()
+    - About 50% faster, thanks to suggestions from Rodney Brown
+- Add deflateBound() and compressBound() functions
+- Fix memory leak in deflateInit2()
+- Permit setting dictionary for raw deflate (for parallel deflate)
+- Fix const declaration for gzwrite()
+- Check for some malloc() failures in gzio.c
+- Fix bug in gzopen() on single-byte file 0x1f
+- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
+  and next buffer doesn't start with 0x8b
+- Fix uncompress() to return Z_DATA_ERROR on truncated input
+- Free memory at end of example.c
+- Remove MAX #define in trees.c (conflicted with some libraries)
+- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
+- Declare malloc() and free() in gzio.c if STDC not defined
+- Use malloc() instead of calloc() in zutil.c if int big enough
+- Define STDC for AIX
+- Add aix/ with approach for compiling shared library on AIX
+- Add HP-UX support for shared libraries in configure
+- Add OpenUNIX support for shared libraries in configure
+- Use $cc instead of gcc to build shared library
+- Make prefix directory if needed when installing
+- Correct Macintosh avoidance of typedef Byte in zconf.h
+- Correct Turbo C memory allocation when under Linux
+- Use libz.a instead of -lz in Makefile (assure use of compiled library)
+- Update configure to check for snprintf or vsnprintf functions and their
+  return value, warn during make if using an insecure function
+- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
+  is lost when library is used--resolution is to build new zconf.h
+- Documentation improvements (in zlib.h):
+    - Document raw deflate and inflate
+    - Update RFCs URL
+    - Point out that zlib and gzip formats are different
+    - Note that Z_BUF_ERROR is not fatal
+    - Document string limit for gzprintf() and possible buffer overflow
+    - Note requirement on avail_out when flushing
+    - Note permitted values of flush parameter of inflate()
+- Add some FAQs (and even answers) to the FAQ
+- Add contrib/inflate86/ for x86 faster inflate
+- Add contrib/blast/ for PKWare Data Compression Library decompression
+- Add contrib/puff/ simple inflate for deflate format description
+
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+  This creates a security problem described in
+  http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+  less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+  of 256 bytes. (A complete fix will be available in 1.1.5).
+
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+  occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+  (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean"  (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+  . zutil.c, zutil.h: added "const" for zmem*
+  . Make_vms.com: fixed some typos
+  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+  . msdos/Makefile.*: use model-dependent name for the built zlib library
+  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+  See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+  completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+  on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+  the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
+  trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occurring only with compression level 0 (thanks to
+  Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+  (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+  inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+   contrib/asm386/ by Gilles Vollant <info@winimage.com>
+        386 asm code replacing longest_match().
+   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+   contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
+        Another C++ I/O streams interface
+   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+        A very simple tar.gz file extractor using zlib
+   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+  level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+  (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+  bit, so the decompressor could decompress all the correct data but went
+  on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+  small and medium models; this makes the library incompatible with previous
+  versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+  avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+  and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
+- fixed deflate for 64-bit systems (detected on Cray)
+- fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
+- make falloc completely reentrant (inftrees.c)
+- fixed very unlikely race condition in ct_static_init
+- free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
+- Check for __cpluplus in zlib.h
+- Better test in ct_align for partial flush
+- avoid harmless warnings for Borland C++
+- initialize hash_head in deflate.c
+- avoid warning on fdopen (gzio.c) for HP cc -Aa
+- include stdlib.h for STDC compilers
+- include errno.h for Cray
+- ignore error if ranlib doesn't exist
+- call ranlib twice for NeXTSTEP
+- use exec_prefix instead of prefix for libz.a
+- renamed ct_* as _tr_* to avoid conflict with applications
+- clear z->msg in inflateInit2 before any error return
+- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
+- fixed typo in zconf.h (_GNUC__ => __GNUC__)
+- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
+- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
+- in fcalloc, normalize pointer if size > 65520 bytes
+- don't use special fcalloc for 32 bit Borland C++
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
+     (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
+
+Changes in 0.95 (16 Aug 95)
+- fix MSDOS small and medium model (now easier to adapt to any compiler)
+- inlined send_bits
+- fix the final (:-) bug for deflate with flush (output was correct but
+  not completely flushed in rare occasions).
+- default window size is same for compression and decompression
+  (it's now sufficient to set MAX_WBITS in zconf.h).
+- voidp -> voidpf and voidnp -> voidp (for consistency with other
+  typedefs and because voidnp was not near in large model).
+
+Changes in 0.94 (13 Aug 95)
+- support MSDOS medium model
+- fix deflate with flush (could sometimes generate bad output)
+- fix deflateReset (zlib header was incorrectly suppressed)
+- added support for VMS
+- allow a compression level in gzopen()
+- gzflush now calls fflush
+- For deflate with flush, flush even if no more input is provided.
+- rename libgz.a as libz.a
+- avoid complex expression in infcodes.c triggering Turbo C bug
+- work around a problem with gcc on Alpha (in INSERT_STRING)
+- don't use inline functions (problem with some gcc versions)
+- allow renaming of Byte, uInt, etc... with #define.
+- avoid warning about (unused) pointer before start of array in deflate.c
+- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
+- avoid reserved word 'new' in trees.c
+
+Changes in 0.93 (25 June 95)
+- temporarily disable inline functions
+- make deflate deterministic
+- give enough lookahead for PARTIAL_FLUSH
+- Set binary mode for stdin/stdout in minigzip.c for OS/2
+- don't even use signed char in inflate (not portable enough)
+- fix inflate memory leak for segmented architectures
+
+Changes in 0.92 (3 May 95)
+- don't assume that char is signed (problem on SGI)
+- Clear bit buffer when starting a stored block
+- no memcpy on Pyramid
+- suppressed inftest.c
+- optimized fill_window, put longest_match inline for gcc
+- optimized inflate on stored blocks.
+- untabify all sources to simplify patches
+
+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+  was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+  pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
+Changes in 0.8 (29 April 95)
+- added fast inflate (inffast.c)
+- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
+  is incompatible with previous versions of zlib which returned Z_OK.
+- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+  (actually that was not a compiler bug, see 0.81 above)
+- gzread no longer reads one extra byte in certain cases
+- In gzio destroy(), don't reference a freed structure
+- avoid many warnings for MSDOS
+- avoid the ERROR symbol which is used by MS Windows
+
+Changes in 0.71 (14 April 95)
+- Fixed more MSDOS compilation problems :( There is still a bug with
+  TurboC large model.
+
+Changes in 0.7 (14 April 95)
+- Added full inflate support.
+- Simplified the crc32() interface. The pre- and post-conditioning
+  (one's complement) is now done inside crc32(). WARNING: this is
+  incompatible with previous versions; see zlib.h for the new usage.
+
+Changes in 0.61 (12 April 95)
+- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
+
+Changes in 0.6 (11 April 95)
+- added minigzip.c
+- added gzdopen to reopen a file descriptor as gzFile
+- added transparent reading of non-gziped files in gzread.
+- fixed bug in gzread (don't read crc as data)
+- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
+- don't allocate big arrays in the stack (for MSDOS)
+- fix some MSDOS compilation problems
+
+Changes in 0.5:
+- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
+  not yet Z_FULL_FLUSH.
+- support decompression but only in a single step (forced Z_FINISH)
+- added opaque object for zalloc and zfree.
+- added deflateReset and inflateReset
+- added a variable zlib_version for consistency checking.
+- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
+  Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
+
+Changes in 0.4:
+- avoid "zip" everywhere, use zlib instead of ziplib.
+- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
+  if compression method == 8.
+- added adler32 and crc32
+- renamed deflateOptions as deflateInit2, call one or the other but not both
+- added the method parameter for deflateInit2.
+- added inflateInit2
+- simplied considerably deflateInit and inflateInit by not supporting
+  user-provided history buffer. This is supported only in deflateInit2
+  and inflateInit2.
+
+Changes in 0.3:
+- prefix all macro names with Z_
+- use Z_FINISH instead of deflateEnd to finish compression.
+- added Z_HUFFMAN_ONLY
+- added gzerror()
Index: cpukit/zlib/FAQ
===================================================================
--- cpukit/zlib/FAQ	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/FAQ	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,366 @@
+
+                Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page
+http://zlib.net/ which may have more recent information.
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+    Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+    The zlib sources can be compiled without change to produce a DLL.  See the
+    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
+    precompiled DLL are found in the zlib web site at http://zlib.net/ .
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+    See
+        * http://marknelson.us/1997/01/01/zlib-engine/
+        * win32/DLL_FAQ.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR.
+
+    Make sure that before the call of compress(), the length of the compressed
+    buffer is equal to the available size of the compressed buffer and not
+    zero.  For Visual Basic, check that this parameter is passed by reference
+    ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
+
+    Before making the call, make sure that avail_in and avail_out are not zero.
+    When setting the parameter flush equal to Z_FINISH, also make sure that
+    avail_out is big enough to allow processing all pending input.  Note that a
+    Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
+    made with more input or output space.  A Z_BUF_ERROR may in fact be
+    unavoidable depending on how the functions are used, since it is not
+    possible to tell whether or not there is more output pending when
+    strm.avail_out returns with zero.  See http://zlib.net/zlib_how.html for a
+    heavily annotated example.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+    It's in zlib.h .  Examples of zlib usage are in the files example.c and
+    minigzip.c, with more in examples/ .
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+    Because we would like to keep zlib as a very small and simple package.
+    zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+    Most of the time, such problems are due to an incorrect usage of zlib.
+    Please try to reproduce the problem with a small program and send the
+    corresponding source to us at zlib@gzip.org .  Do not send multi-megabyte
+    data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+    If "make test" produces something like
+
+       example.o(.text+0x154): undefined reference to `gzputc'
+
+    check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+    /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+    See the contrib/delphi directory in the zlib distribution.
+
+11. Can zlib handle .zip archives?
+
+    Not by itself, no.  See the directory contrib/minizip in the zlib
+    distribution.
+
+12. Can zlib handle .Z files?
+
+    No, sorry.  You have to spawn an uncompress or gunzip subprocess, or adapt
+    the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+    make clean
+    ./configure -s
+    make
+
+14. How do I install a shared zlib library on Unix?
+
+    After the above, then:
+
+    make install
+
+    However, many flavors of Unix come with a shared zlib already installed.
+    Before going to the trouble of compiling a shared version of zlib and
+    trying to install it, you may want to check if it's already there!  If you
+    can #include <zlib.h>, it's there.  The -lz option will probably link to
+    it.  You can check the version at the top of zlib.h or with the
+    ZLIB_VERSION symbol defined in zlib.h .
+
+15. I have a question about OttoPDF.
+
+    We are not the authors of OttoPDF. The real author is on the OttoPDF web
+    site: Joel Hainley, jhainley@myndkryme.com.
+
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+    Yes. See http://www.pdflib.com/ . To modify PDF forms, see
+    http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+    After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+    generates an error such as:
+
+        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+        symbol __register_frame_info: referenced symbol not found
+
+    The symbol __register_frame_info is not part of zlib, it is generated by
+    the C compiler (cc or gcc).  You must recompile applications using zlib
+    which have this problem.  This problem is specific to Solaris.  See
+    http://www.sunfreeware.com for Solaris versions of zlib and applications
+    using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
+
+    The compress and deflate functions produce data in the zlib format, which
+    is different and incompatible with the gzip format.  The gz* functions in
+    zlib on the other hand use the gzip format.  Both the zlib and gzip formats
+    use the same compressed data format internally, but have different headers
+    and trailers around the compressed data.
+
+19. Ok, so why are there two different formats?
+
+    The gzip format was designed to retain the directory information about a
+    single file, such as the name and last modification date.  The zlib format
+    on the other hand was designed for in-memory and communication channel
+    applications, and has a much more compact header and trailer and uses a
+    faster integrity check than gzip.
+
+20. Well that's nice, but how do I make a gzip file in memory?
+
+    You can request that deflate write the gzip format instead of the zlib
+    format using deflateInit2().  You can also request that inflate decode the
+    gzip format using inflateInit2().  Read zlib.h for more details.
+
+21. Is zlib thread-safe?
+
+    Yes.  However any library routines that zlib uses and any application-
+    provided memory allocation routines must also be thread-safe.  zlib's gz*
+    functions use stdio library routines, and most of zlib's functions use the
+    library memory allocation routines by default.  zlib's *Init* functions
+    allow for the application to provide custom memory allocation routines.
+
+    Of course, you should only operate on any given zlib or gzip stream from a
+    single thread at a time.
+
+22. Can I use zlib in my commercial application?
+
+    Yes.  Please read the license in zlib.h.
+
+23. Is zlib under the GNU license?
+
+    No.  Please read the license in zlib.h.
+
+24. The license says that altered source versions must be "plainly marked". So
+    what exactly do I need to do to meet that requirement?
+
+    You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h.  In
+    particular, the final version number needs to be changed to "f", and an
+    identification string should be appended to ZLIB_VERSION.  Version numbers
+    x.x.x.f are reserved for modifications to zlib by others than the zlib
+    maintainers.  For example, if the version of the base zlib you are altering
+    is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
+    ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3".  You can also
+    update the version strings in deflate.c and inftrees.c.
+
+    For altered source distributions, you should also note the origin and
+    nature of the changes in zlib.h, as well as in ChangeLog and README, along
+    with the dates of the alterations.  The origin should include at least your
+    name (or your company's name), and an email address to contact for help or
+    issues with the library.
+
+    Note that distributing a compiled zlib library along with zlib.h and
+    zconf.h is also a source distribution, and so you should change
+    ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
+    in zlib.h as you would for a full source distribution.
+
+25. Will zlib work on a big-endian or little-endian architecture, and can I
+    exchange compressed data between them?
+
+    Yes and yes.
+
+26. Will zlib work on a 64-bit machine?
+
+    Yes.  It has been tested on 64-bit machines, and has no dependence on any
+    data types being limited to 32-bits in length.  If you have any
+    difficulties, please provide a complete problem report to zlib@gzip.org
+
+27. Will zlib decompress data from the PKWare Data Compression Library?
+
+    No.  The PKWare DCL uses a completely different compressed data format than
+    does PKZIP and zlib.  However, you can look in zlib's contrib/blast
+    directory for a possible solution to your problem.
+
+28. Can I access data randomly in a compressed stream?
+
+    No, not without some preparation.  If when compressing you periodically use
+    Z_FULL_FLUSH, carefully write all the pending data at those points, and
+    keep an index of those locations, then you can start decompression at those
+    points.  You have to be careful to not use Z_FULL_FLUSH too often, since it
+    can significantly degrade compression.  Alternatively, you can scan a
+    deflate stream once to generate an index, and then use that index for
+    random access.  See examples/zran.c .
+
+29. Does zlib work on MVS, OS/390, CICS, etc.?
+
+    It has in the past, but we have not heard of any recent evidence.  There
+    were working ports of zlib 1.1.4 to MVS, but those links no longer work.
+    If you know of recent, successful applications of zlib on these operating
+    systems, please let us know.  Thanks.
+
+30. Is there some simpler, easier to read version of inflate I can look at to
+    understand the deflate format?
+
+    First off, you should read RFC 1951.  Second, yes.  Look in zlib's
+    contrib/puff directory.
+
+31. Does zlib infringe on any patents?
+
+    As far as we know, no.  In fact, that was originally the whole point behind
+    zlib.  Look here for some more information:
+
+    http://www.gzip.org/#faq11
+
+32. Can zlib work with greater than 4 GB of data?
+
+    Yes.  inflate() and deflate() will process any amount of data correctly.
+    Each call of inflate() or deflate() is limited to input and output chunks
+    of the maximum value that can be stored in the compiler's "unsigned int"
+    type, but there is no limit to the number of chunks.  Note however that the
+    strm.total_in and strm_total_out counters may be limited to 4 GB.  These
+    counters are provided as a convenience and are not used internally by
+    inflate() or deflate().  The application can easily set up its own counters
+    updated after each call of inflate() or deflate() to count beyond 4 GB.
+    compress() and uncompress() may be limited to 4 GB, since they operate in a
+    single call.  gzseek() and gztell() may be limited to 4 GB depending on how
+    zlib is compiled.  See the zlibCompileFlags() function in zlib.h.
+
+    The word "may" appears several times above since there is a 4 GB limit only
+    if the compiler's "long" type is 32 bits.  If the compiler's "long" type is
+    64 bits, then the limit is 16 exabytes.
+
+33. Does zlib have any security vulnerabilities?
+
+    The only one that we are aware of is potentially in gzprintf().  If zlib is
+    compiled to use sprintf() or vsprintf(), then there is no protection
+    against a buffer overflow of an 8K string space (or other value as set by
+    gzbuffer()), other than the caller of gzprintf() assuring that the output
+    will not exceed 8K.  On the other hand, if zlib is compiled to use
+    snprintf() or vsnprintf(), which should normally be the case, then there is
+    no vulnerability.  The ./configure script will display warnings if an
+    insecure variation of sprintf() will be used by gzprintf().  Also the
+    zlibCompileFlags() function will return information on what variant of
+    sprintf() is used by gzprintf().
+
+    If you don't have snprintf() or vsnprintf() and would like one, you can
+    find a portable implementation here:
+
+        http://www.ijs.si/software/snprintf/
+
+    Note that you should be using the most recent version of zlib.  Versions
+    1.1.3 and before were subject to a double-free vulnerability, and versions
+    1.2.1 and 1.2.2 were subject to an access exception when decompressing
+    invalid compressed data.
+
+34. Is there a Java version of zlib?
+
+    Probably what you want is to use zlib in Java. zlib is already included
+    as part of the Java SDK in the java.util.zip package. If you really want
+    a version of zlib written in the Java language, look on the zlib home
+    page for links: http://zlib.net/ .
+
+35. I get this or that compiler or source-code scanner warning when I crank it
+    up to maximally-pedantic. Can't you guys write proper code?
+
+    Many years ago, we gave up attempting to avoid warnings on every compiler
+    in the universe.  It just got to be a waste of time, and some compilers
+    were downright silly as well as contradicted each other.  So now, we simply
+    make sure that the code always works.
+
+36. Valgrind (or some similar memory access checker) says that deflate is
+    performing a conditional jump that depends on an uninitialized value.
+    Isn't that a bug?
+
+    No.  That is intentional for performance reasons, and the output of deflate
+    is not affected.  This only started showing up recently since zlib 1.2.x
+    uses malloc() by default for allocations, whereas earlier versions used
+    calloc(), which zeros out the allocated memory.  Even though the code was
+    correct, versions 1.2.4 and later was changed to not stimulate these
+    checkers.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
+    data format?
+
+    Probably not. Look in the comp.compression FAQ for pointers to various
+    formats and associated software.
+
+38. How can I encrypt/decrypt zip files with zlib?
+
+    zlib doesn't support encryption.  The original PKZIP encryption is very
+    weak and can be broken with freely available programs.  To get strong
+    encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
+    compression.  For PKZIP compatible "encryption", look at
+    http://www.info-zip.org/
+
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+
+    "gzip" is the gzip format, and "deflate" is the zlib format.  They should
+    probably have called the second one "zlib" instead to avoid confusion with
+    the raw deflate compressed data format.  While the HTTP 1.1 RFC 2616
+    correctly points to the zlib specification in RFC 1950 for the "deflate"
+    transfer encoding, there have been reports of servers and browsers that
+    incorrectly produce or expect raw deflate data per the deflate
+    specficiation in RFC 1951, most notably Microsoft.  So even though the
+    "deflate" transfer encoding using the zlib format would be the more
+    efficient approach (and in fact exactly what the zlib format was designed
+    for), using the "gzip" transfer encoding is probably more reliable due to
+    an unfortunate choice of name on the part of the HTTP 1.1 authors.
+
+    Bottom line: use the gzip format for HTTP 1.1 encoding.
+
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
+
+    No.  PKWare has apparently decided to keep that format proprietary, since
+    they have not documented it as they have previous compression formats.  In
+    any case, the compression improvements are so modest compared to other more
+    modern approaches, that it's not worth the effort to implement.
+
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+    There are no zip functions in zlib.  You are probably using minizip by
+    Giles Vollant, which is found in the contrib directory of zlib.  It is not
+    part of zlib.  In fact none of the stuff in contrib is part of zlib.  The
+    files in there are not supported by the zlib authors.  You need to contact
+    the authors of the respective contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+    Since it's part of zlib, doesn't that mean that all of zlib falls under the
+    GNU GPL?
+
+    No.  The files in contrib are not part of zlib.  They were contributed by
+    other authors and are provided as a convenience to the user within the zlib
+    distribution.  Each item in contrib has its own license.
+
+43. Is zlib subject to export controls?  What is its ECCN?
+
+    zlib is not subject to export controls, and so is classified as EAR99.
+
+44. Can you please sign these lengthy legal documents and fax them back to us
+    so that we can use your software in our product?
+
+    No. Go away. Shoo.
Index: cpukit/zlib/Makefile.am
===================================================================
--- cpukit/zlib/Makefile.am	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/Makefile.am	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,28 @@
+#
+# $Id$
+#
+
+include $(top_srcdir)/automake/compile.am
+
+project_lib_LIBRARIES = libz.a
+
+libz_a_SOURCES = adler32.c
+libz_a_SOURCES += compress.c
+libz_a_SOURCES += crc32.c crc32.h
+libz_a_SOURCES += deflate.c deflate.h
+libz_a_SOURCES += gzclose.c gzguts.h gzlib.c gzread.c gzwrite.c
+libz_a_SOURCES += infback.c
+libz_a_SOURCES += inffast.c inffast.h
+libz_a_SOURCES += inffixed.h
+libz_a_SOURCES += inflate.c inflate.h
+libz_a_SOURCES += inftrees.c inftrees.h
+libz_a_SOURCES += trees.c trees.h
+libz_a_SOURCES += uncompr.c
+libz_a_SOURCES += zconf.h
+libz_a_SOURCES += zlib.h
+libz_a_SOURCES += zutil.c zutil.h
+
+include_HEADERS = zlib.h zconf.h
+
+include $(srcdir)/preinstall.am
+include $(top_srcdir)/automake/local.am
Index: cpukit/zlib/README
===================================================================
--- cpukit/zlib/README	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/README	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,114 @@
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.4 is a general purpose data compression library.  All the code is
+thread safe.  The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+and rfc1952.txt (gzip format).
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
+of the library is given in the file example.c which also tests that the library
+is working correctly.  Another example is given in the file minigzip.c.  The
+compression library itself is composed of all source files except example.c and
+minigzip.c.
+
+To compile all files and run the test program, follow the instructions given at
+the top of Makefile.in.  In short "./configure; make test", and if that goes
+well, "make install" should work for most flavors of Unix.  For Windows, use one
+of the special makefiles in win32/ or projects/ .  For VMS, use make_vms.com.
+
+Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
+<info@winimage.com> for the Windows DLL version.  The zlib home page is
+http://zlib.net/ .  Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
+issue of Dr.  Dobb's Journal; a copy of the article is available at
+http://marknelson.us/1997/01/01/zlib-engine/ .
+
+The changes made in version 1.2.4 are documented in the file ChangeLog.
+
+Unsupported third party contributions are provided in directory contrib/ .
+
+zlib is available in Java using the java.util.zip package, documented at
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
+
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
+at CPAN (Comprehensive Perl Archive Network) sites, including
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
+
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
+available in Python 1.5 and later versions, see
+http://www.python.org/doc/lib/module-zlib.html .
+
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
+
+An experimental package to read and write files in .zip format, written on top
+of zlib by Gilles Vollant <info@winimage.com>, is available in the
+contrib/minizip directory of zlib.
+
+
+Notes for some targets:
+
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization. With
+  -O, one libpng test fails. The test works in 32 bit mode (with the -n32
+  compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
+  when compiled with cc.
+
+- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+  necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
+  other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS or BEOS.
+
+- For PalmOs, see http://palmzlib.sourceforge.net/
+
+
+Acknowledgments:
+
+  The deflate format used by zlib was defined by Phil Katz.  The deflate and
+  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
+  people who reported problems and suggested various improvements in zlib; they
+  are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2010 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign.  The sources are provided for free but without
+warranty of any kind.  The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes.  Please read
+the FAQ for more information on the distribution of modified source versions.
Index: cpukit/zlib/adler32.c
===================================================================
--- cpukit/zlib/adler32.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/adler32.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,171 @@
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2007 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+#define local static
+
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
+
+#define BASE 65521UL    /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware */
+#ifdef NO_DIVIDE
+#  define MOD(a) \
+    do { \
+        if (a >= (BASE << 16)) a -= (BASE << 16); \
+        if (a >= (BASE << 15)) a -= (BASE << 15); \
+        if (a >= (BASE << 14)) a -= (BASE << 14); \
+        if (a >= (BASE << 13)) a -= (BASE << 13); \
+        if (a >= (BASE << 12)) a -= (BASE << 12); \
+        if (a >= (BASE << 11)) a -= (BASE << 11); \
+        if (a >= (BASE << 10)) a -= (BASE << 10); \
+        if (a >= (BASE << 9)) a -= (BASE << 9); \
+        if (a >= (BASE << 8)) a -= (BASE << 8); \
+        if (a >= (BASE << 7)) a -= (BASE << 7); \
+        if (a >= (BASE << 6)) a -= (BASE << 6); \
+        if (a >= (BASE << 5)) a -= (BASE << 5); \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    unsigned long sum2;
+    unsigned n;
+
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
+
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
+            DO16(buf);
+            buf += 16;
+        }
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+#if (defined(_LARGEFILE64_SOURCE)||(_FILE_OFFSET_BITS == 64))
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+#endif /* (defined(_LARGEFILE64_SOURCE)||(_FILE_OFFSET_BITS == 64)) */
Index: cpukit/zlib/compress.c
===================================================================
--- cpukit/zlib/compress.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/compress.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,80 @@
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+    int level;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
+
+    err = deflateInit(&stream, level);
+    if (err != Z_OK) return err;
+
+    err = deflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        deflateEnd(&stream);
+        return err == Z_OK ? Z_BUF_ERROR : err;
+    }
+    *destLen = stream.total_out;
+
+    err = deflateEnd(&stream);
+    return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+     If the default memLevel or windowBits for deflateInit() is changed, then
+   this function needs to be updated.
+ */
+uLong ZEXPORT compressBound (sourceLen)
+    uLong sourceLen;
+{
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
+}
Index: cpukit/zlib/crc32.c
===================================================================
--- cpukit/zlib/crc32.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/crc32.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,444 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2006 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors.  This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id$ */
+
+/*
+  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+  protection on the static variables used to control the first-use generation
+  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+  first call get_crc_table() to initialize the tables before allowing more than
+  one thread to use crc32().
+ */
+
+#ifdef MAKECRCH
+#  include <stdio.h>
+#  ifndef DYNAMIC_CRC_TABLE
+#    define DYNAMIC_CRC_TABLE
+#  endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h"      /* for STDC and FAR definitions */
+
+#define local static
+
+/* Find a four-byte integer type for crc32_little() and crc32_big(). */
+#ifndef NOBYFOUR
+#  ifdef STDC           /* need ANSI C limits.h to determine sizes */
+#    include <limits.h>
+#    define BYFOUR
+#    if (UINT_MAX == 0xffffffffUL)
+       typedef unsigned int u4;
+#    else
+#      if (ULONG_MAX == 0xffffffffUL)
+         typedef unsigned long u4;
+#      else
+#        if (USHRT_MAX == 0xffffffffUL)
+           typedef unsigned short u4;
+#        else
+#          undef BYFOUR     /* can't find a four-byte integer type! */
+#        endif
+#      endif
+#    endif
+#  endif /* STDC */
+#endif /* !NOBYFOUR */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#ifdef BYFOUR
+#  define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
+                (((w)&0xff00)<<8)+(((w)&0xff)<<24))
+   local unsigned long crc32_little OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+   local unsigned long crc32_big OF((unsigned long,
+                        const unsigned char FAR *, unsigned));
+#  define TBLS 8
+#else
+#  define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+                                         unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
+
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local unsigned long FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+   local void write_table OF((FILE *, const unsigned long FAR *));
+#endif /* MAKECRCH */
+/*
+  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+  Polynomials over GF(2) are represented in binary, one bit per coefficient,
+  with the lowest powers in the most significant bit.  Then adding polynomials
+  is just exclusive-or, and multiplying a polynomial by x is a right shift by
+  one.  If we call the above polynomial p, and represent a byte as the
+  polynomial q, also with the lowest power in the most significant bit (so the
+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+  where a mod b means the remainder after dividing a by b.
+
+  This calculation is done using the shift-register method of multiplying and
+  taking the remainder.  The register is initialized to zero, and for each
+  incoming bit, x^32 is added mod p to the register if the bit is a one (where
+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+  x (which is shifting right by one and adding x^32 mod p if the bit shifted
+  out is a one).  We start with the highest power (least significant bit) of
+  q and repeat for all eight bits of q.
+
+  The first table is simply the CRC of all possible eight bit values.  This is
+  all the information needed to generate CRCs on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.  The remaining tables
+  allow for word-at-a-time CRC calculation for both big-endian and little-
+  endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+    unsigned long c;
+    int n, k;
+    unsigned long poly;                 /* polynomial exclusive-or pattern */
+    /* terms of polynomial defining this crc (except x^32): */
+    static volatile int first = 1;      /* flag to limit concurrent making */
+    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+    /* See if another task is already doing this (not thread-safe, but better
+       than nothing -- significantly reduces duration of vulnerability in
+       case the advice about DYNAMIC_CRC_TABLE is ignored) */
+    if (first) {
+        first = 0;
+
+        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+        poly = 0UL;
+        for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
+            poly |= 1UL << (31 - p[n]);
+
+        /* generate a crc for every 8-bit value */
+        for (n = 0; n < 256; n++) {
+            c = (unsigned long)n;
+            for (k = 0; k < 8; k++)
+                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+            crc_table[0][n] = c;
+        }
+
+#ifdef BYFOUR
+        /* generate crc for each value followed by one, two, and three zeros,
+           and then the byte reversal of those as well as the first table */
+        for (n = 0; n < 256; n++) {
+            c = crc_table[0][n];
+            crc_table[4][n] = REV(c);
+            for (k = 1; k < 4; k++) {
+                c = crc_table[0][c & 0xff] ^ (c >> 8);
+                crc_table[k][n] = c;
+                crc_table[k + 4][n] = REV(c);
+            }
+        }
+#endif /* BYFOUR */
+
+        crc_table_empty = 0;
+    }
+    else {      /* not first */
+        /* wait for the other guy to finish (not efficient, but rare) */
+        while (crc_table_empty)
+            ;
+    }
+
+#ifdef MAKECRCH
+    /* write out CRC tables to crc32.h */
+    {
+        FILE *out;
+
+        out = fopen("crc32.h", "w");
+        if (out == NULL) return;
+        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+        fprintf(out, "local const unsigned long FAR ");
+        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
+        write_table(out, crc_table[0]);
+#  ifdef BYFOUR
+        fprintf(out, "#ifdef BYFOUR\n");
+        for (k = 1; k < 8; k++) {
+            fprintf(out, "  },\n  {\n");
+            write_table(out, crc_table[k]);
+        }
+        fprintf(out, "#endif\n");
+#  endif /* BYFOUR */
+        fprintf(out, "  }\n};\n");
+        fclose(out);
+    }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+    FILE *out;
+    const unsigned long FAR *table;
+{
+    int n;
+
+    for (n = 0; n < 256; n++)
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ", table[n],
+                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const unsigned long FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+    return (const unsigned long FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    uInt len;
+{
+    if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+    if (sizeof(void *) == sizeof(ptrdiff_t)) {
+        u4 endian;
+
+        endian = 1;
+        if (*((unsigned char *)(&endian)))
+            return crc32_little(crc, buf, len);
+        else
+            return crc32_big(crc, buf, len);
+    }
+#endif /* BYFOUR */
+    crc = crc ^ 0xffffffffUL;
+    while (len >= 8) {
+        DO8;
+        len -= 8;
+    }
+    if (len) do {
+        DO1;
+    } while (--len);
+    return crc ^ 0xffffffffUL;
+}
+
+#ifdef BYFOUR
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register u4 c;
+    register const u4 FAR *buf4;
+
+    c = (u4)crc;
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+        len--;
+    }
+
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOLIT32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOLIT4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *++buf4; \
+        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    unsigned len;
+{
+    register u4 c;
+    register const u4 FAR *buf4;
+
+    c = REV((u4)crc);
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+        len--;
+    }
+
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4--;
+    while (len >= 32) {
+        DOBIG32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOBIG4;
+        len -= 4;
+    }
+    buf4++;
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)(REV(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+    unsigned long *mat;
+    unsigned long vec;
+{
+    unsigned long sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+    unsigned long *square;
+    unsigned long *mat;
+{
+    int n;
+
+    for (n = 0; n < GF2_DIM; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off64_t len2;
+{
+    int n;
+    unsigned long row;
+    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
+    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
+
+    /* degenerate case (also disallow negative lengths) */
+    if (len2 <= 0)
+        return crc1;
+
+    /* put operator for one zero bit in odd */
+    odd[0] = 0xedb88320UL;          /* CRC-32 polynomial */
+    row = 1;
+    for (n = 1; n < GF2_DIM; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* apply len2 zeros to crc1 (first square will put the operator for one
+       zero byte, eight zero bits, in even) */
+    do {
+        /* apply zeros operator for this bit of len2 */
+        gf2_matrix_square(even, odd);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(even, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+        if (len2 == 0)
+            break;
+
+        /* another iteration of the loop with odd and even swapped */
+        gf2_matrix_square(odd, even);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(odd, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+    } while (len2 != 0);
+
+    /* return combined crc */
+    crc1 ^= crc2;
+    return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off_t len2;
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
+
+#if (defined(_LARGEFILE64_SOURCE)||(_FILE_OFFSET_BITS == 64))
+uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off64_t len2;
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
+#endif /* (defined(_LARGEFILE64_SOURCE)||(_FILE_OFFSET_BITS == 64)) */
Index: cpukit/zlib/deflate.c
===================================================================
--- cpukit/zlib/deflate.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/deflate.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,1834 @@
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ *  ALGORITHM
+ *
+ *      The "deflation" process depends on being able to identify portions
+ *      of the input text which are identical to earlier input (within a
+ *      sliding window trailing behind the input currently being processed).
+ *
+ *      The most straightforward technique turns out to be the fastest for
+ *      most input files: try all possible matches and select the longest.
+ *      The key feature of this algorithm is that insertions into the string
+ *      dictionary are very simple and thus fast, and deletions are avoided
+ *      completely. Insertions are performed at each input character, whereas
+ *      string matches are performed only when the previous match ends. So it
+ *      is preferable to spend more time in matches to allow very fast string
+ *      insertions and avoid deletions. The matching algorithm for small
+ *      strings is inspired from that of Rabin & Karp. A brute force approach
+ *      is used to find longer strings when a small match has been found.
+ *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ *      (by Leonid Broukhis).
+ *         A previous version of this file used a more sophisticated algorithm
+ *      (by Fiala and Greene) which is guaranteed to run in linear amortized
+ *      time, but has a larger average cost, uses more memory and is patented.
+ *      However the F&G algorithm may be faster for some highly redundant
+ *      files if the parameter max_chain_length (described below) is too large.
+ *
+ *  ACKNOWLEDGEMENTS
+ *
+ *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ *      I found it in 'freeze' written by Leonid Broukhis.
+ *      Thanks to many people for bug reports and testing.
+ *
+ *  REFERENCES
+ *
+ *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ *      Available in http://www.ietf.org/rfc/rfc1951.txt
+ *
+ *      A description of the Rabin and Karp algorithm is given in the book
+ *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ *      Fiala,E.R., and Greene,D.H.
+ *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+/* @(#) $Id$ */
+
+#include "deflate.h"
+
+const char deflate_copyright[] =
+   " deflate 1.2.4 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/* ===========================================================================
+ *  Function prototypes.
+ */
+typedef enum {
+    need_more,      /* block not completed, need more input or more output */
+    block_done,     /* block flush performed */
+    finish_started, /* finish started, need only more output at next deflate */
+    finish_done     /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
+local void fill_window    OF((deflate_state *s));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast   OF((deflate_state *s, int flush));
+#ifndef FASTEST
+local block_state deflate_slow   OF((deflate_state *s, int flush));
+#endif
+local block_state deflate_rle    OF((deflate_state *s, int flush));
+local block_state deflate_huff   OF((deflate_state *s, int flush));
+local void lm_init        OF((deflate_state *s));
+local void putShortMSB    OF((deflate_state *s, uInt b));
+local void flush_pending  OF((z_streamp strm));
+local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
+#ifdef ASMV
+      void match_init OF((void)); /* asm code initialization */
+      uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#endif
+
+#ifdef DEBUG
+local  void check_match OF((deflate_state *s, IPos start, IPos match,
+                            int length));
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+#  define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+   ush good_length; /* reduce lazy search above this match length */
+   ush max_lazy;    /* do not perform lazy search above this match length */
+   ush nice_length; /* quit search above this match length */
+   ush max_chain;
+   compress_func func;
+} config;
+
+#ifdef FASTEST
+local const config configuration_table[2] = {
+/*      good lazy nice chain */
+/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
+/* 1 */ {4,    4,  8,    4, deflate_fast}}; /* max speed, no lazy matches */
+#else
+local const config configuration_table[10] = {
+/*      good lazy nice chain */
+/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
+/* 1 */ {4,    4,  8,    4, deflate_fast}, /* max speed, no lazy matches */
+/* 2 */ {4,    5, 16,    8, deflate_fast},
+/* 3 */ {4,    6, 32,   32, deflate_fast},
+
+/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
+/* 5 */ {8,   16, 32,   32, deflate_slow},
+/* 6 */ {8,   16, 128, 128, deflate_slow},
+/* 7 */ {8,   32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
+#endif
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+#ifndef NO_DUMMY_DECL
+struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
+#endif
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
+ *    input characters, so that a running hash key can be computed from the
+ *    previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
+ * IN  assertion: all calls to to INSERT_STRING are made with consecutive
+ *    input characters and the first MIN_MATCH bytes of str are valid
+ *    (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#else
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#endif
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+    s->head[s->hash_size-1] = NIL; \
+    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+    z_streamp strm;
+    int level;
+    const char *version;
+    int stream_size;
+{
+    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
+                         Z_DEFAULT_STRATEGY, version, stream_size);
+    /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+                  version, stream_size)
+    z_streamp strm;
+    int  level;
+    int  method;
+    int  windowBits;
+    int  memLevel;
+    int  strategy;
+    const char *version;
+    int stream_size;
+{
+    deflate_state *s;
+    int wrap = 1;
+    static const char my_version[] = ZLIB_VERSION;
+
+    ushf *overlay;
+    /* We overlay pending_buf and d_buf+l_buf. This works since the average
+     * output size for (length,distance) codes is <= 24 bits.
+     */
+
+    if (version == Z_NULL || version[0] != my_version[0] ||
+        stream_size != sizeof(z_stream)) {
+        return Z_VERSION_ERROR;
+    }
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+
+    strm->msg = Z_NULL;
+    if (strm->zalloc == (alloc_func)0) {
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+    }
+    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+
+#ifdef FASTEST
+    if (level != 0) level = 1;
+#else
+    if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+
+    if (windowBits < 0) { /* suppress zlib wrapper */
+        wrap = 0;
+        windowBits = -windowBits;
+    }
+#ifdef GZIP
+    else if (windowBits > 15) {
+        wrap = 2;       /* write gzip wrapper instead */
+        windowBits -= 16;
+    }
+#endif
+    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
+        strategy < 0 || strategy > Z_FIXED) {
+        return Z_STREAM_ERROR;
+    }
+    if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
+    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
+    if (s == Z_NULL) return Z_MEM_ERROR;
+    strm->state = (struct internal_state FAR *)s;
+    s->strm = strm;
+
+    s->wrap = wrap;
+    s->gzhead = Z_NULL;
+    s->w_bits = windowBits;
+    s->w_size = 1 << s->w_bits;
+    s->w_mask = s->w_size - 1;
+
+    s->hash_bits = memLevel + 7;
+    s->hash_size = 1 << s->hash_bits;
+    s->hash_mask = s->hash_size - 1;
+    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
+    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
+
+    s->high_water = 0;      /* nothing written to s->window yet */
+
+    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+    s->pending_buf = (uchf *) overlay;
+    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
+        s->pending_buf == Z_NULL) {
+        s->status = FINISH_STATE;
+        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
+        deflateEnd (strm);
+        return Z_MEM_ERROR;
+    }
+    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+    s->level = level;
+    s->strategy = strategy;
+    s->method = (Byte)method;
+
+    return deflateReset(strm);
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+    z_streamp strm;
+    const Bytef *dictionary;
+    uInt  dictLength;
+{
+    deflate_state *s;
+    uInt length = dictLength;
+    uInt n;
+    IPos hash_head = 0;
+
+    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
+        strm->state->wrap == 2 ||
+        (strm->state->wrap == 1 && strm->state->status != INIT_STATE))
+        return Z_STREAM_ERROR;
+
+    s = strm->state;
+    if (s->wrap)
+        strm->adler = adler32(strm->adler, dictionary, dictLength);
+
+    if (length < MIN_MATCH) return Z_OK;
+    if (length > s->w_size) {
+        length = s->w_size;
+        dictionary += dictLength - length; /* use the tail of the dictionary */
+    }
+    zmemcpy(s->window, dictionary, length);
+    s->strstart = length;
+    s->block_start = (long)length;
+
+    /* Insert all strings in the hash table (except for the last two bytes).
+     * s->lookahead stays null, so s->ins_h will be recomputed at the next
+     * call of fill_window.
+     */
+    s->ins_h = s->window[0];
+    UPDATE_HASH(s, s->ins_h, s->window[1]);
+    for (n = 0; n <= length - MIN_MATCH; n++) {
+        INSERT_STRING(s, n, hash_head);
+    }
+    if (hash_head) hash_head = 0;  /* to make compiler happy */
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+    z_streamp strm;
+{
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
+        return Z_STREAM_ERROR;
+    }
+
+    strm->total_in = strm->total_out = 0;
+    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
+    strm->data_type = Z_UNKNOWN;
+
+    s = (deflate_state *)strm->state;
+    s->pending = 0;
+    s->pending_out = s->pending_buf;
+
+    if (s->wrap < 0) {
+        s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
+    }
+    s->status = s->wrap ? INIT_STATE : BUSY_STATE;
+    strm->adler =
+#ifdef GZIP
+        s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
+#endif
+        adler32(0L, Z_NULL, 0);
+    s->last_flush = Z_NO_FLUSH;
+
+    _tr_init(s);
+    lm_init(s);
+
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+    z_streamp strm;
+    gz_headerp head;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+    strm->state->gzhead = head;
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePrime (strm, bits, value)
+    z_streamp strm;
+    int bits;
+    int value;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    strm->state->bi_valid = bits;
+    strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateParams(strm, level, strategy)
+    z_streamp strm;
+    int level;
+    int strategy;
+{
+    deflate_state *s;
+    compress_func func;
+    int err = Z_OK;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    s = strm->state;
+
+#ifdef FASTEST
+    if (level != 0) level = 1;
+#else
+    if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
+        return Z_STREAM_ERROR;
+    }
+    func = configuration_table[s->level].func;
+
+    if ((strategy != s->strategy || func != configuration_table[level].func) &&
+        strm->total_in != 0) {
+        /* Flush the last buffer: */
+        err = deflate(strm, Z_BLOCK);
+    }
+    if (s->level != level) {
+        s->level = level;
+        s->max_lazy_match   = configuration_table[level].max_lazy;
+        s->good_match       = configuration_table[level].good_length;
+        s->nice_match       = configuration_table[level].nice_length;
+        s->max_chain_length = configuration_table[level].max_chain;
+    }
+    s->strategy = strategy;
+    return err;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+    z_streamp strm;
+    int good_length;
+    int max_lazy;
+    int nice_length;
+    int max_chain;
+{
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    s = strm->state;
+    s->good_match = good_length;
+    s->max_lazy_match = max_lazy;
+    s->nice_match = nice_length;
+    s->max_chain_length = max_chain;
+    return Z_OK;
+}
+
+/* =========================================================================
+ * For the default windowBits of 15 and memLevel of 8, this function returns
+ * a close to exact, as well as small, upper bound on the compressed size.
+ * They are coded as constants here for a reason--if the #define's are
+ * changed, then this function needs to be changed as well.  The return
+ * value for 15 and 8 only works for those exact settings.
+ *
+ * For any setting other than those defaults for windowBits and memLevel,
+ * the value returned is a conservative worst case for the maximum expansion
+ * resulting from using fixed blocks instead of stored blocks, which deflate
+ * can emit on compressed data for some combinations of the parameters.
+ *
+ * This function could be more sophisticated to provide closer upper bounds for
+ * every combination of windowBits and memLevel.  But even the conservative
+ * upper bound of about 14% expansion does not seem onerous for output buffer
+ * allocation.
+ */
+uLong ZEXPORT deflateBound(strm, sourceLen)
+    z_streamp strm;
+    uLong sourceLen;
+{
+    deflate_state *s;
+    uLong complen, wraplen;
+    Bytef *str;
+
+    /* conservative upper bound for compressed data */
+    complen = sourceLen +
+              ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
+
+    /* if can't get parameters, return conservative bound plus zlib wrapper */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return complen + 6;
+
+    /* compute wrapper length */
+    s = strm->state;
+    switch (s->wrap) {
+    case 0:                                 /* raw deflate */
+        wraplen = 0;
+        break;
+    case 1:                                 /* zlib wrapper */
+        wraplen = 6 + (s->strstart ? 4 : 0);
+        break;
+    case 2:                                 /* gzip wrapper */
+        wraplen = 18;
+        if (s->gzhead != Z_NULL) {          /* user-supplied gzip header */
+            if (s->gzhead->extra != Z_NULL)
+                wraplen += 2 + s->gzhead->extra_len;
+            str = s->gzhead->name;
+            if (str != Z_NULL)
+                do {
+                    wraplen++;
+                } while (*str++);
+            str = s->gzhead->comment;
+            if (str != Z_NULL)
+                do {
+                    wraplen++;
+                } while (*str++);
+            if (s->gzhead->hcrc)
+                wraplen += 2;
+        }
+        break;
+    default:                                /* for compiler happiness */
+        wraplen = 6;
+    }
+
+    /* if not default parameters, return conservative bound */
+    if (s->w_bits != 15 || s->hash_bits != 8 + 7)
+        return complen + wraplen;
+
+    /* default settings: return tight bound for that case */
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13 - 6 + wraplen;
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+local void putShortMSB (s, b)
+    deflate_state *s;
+    uInt b;
+{
+    put_byte(s, (Byte)(b >> 8));
+    put_byte(s, (Byte)(b & 0xff));
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+local void flush_pending(strm)
+    z_streamp strm;
+{
+    unsigned len = strm->state->pending;
+
+    if (len > strm->avail_out) len = strm->avail_out;
+    if (len == 0) return;
+
+    zmemcpy(strm->next_out, strm->state->pending_out, len);
+    strm->next_out  += len;
+    strm->state->pending_out  += len;
+    strm->total_out += len;
+    strm->avail_out  -= len;
+    strm->state->pending -= len;
+    if (strm->state->pending == 0) {
+        strm->state->pending_out = strm->state->pending_buf;
+    }
+}
+
+/* ========================================================================= */
+int ZEXPORT deflate (strm, flush)
+    z_streamp strm;
+    int flush;
+{
+    int old_flush; /* value of flush param for previous deflate call */
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL ||
+        flush > Z_BLOCK || flush < 0) {
+        return Z_STREAM_ERROR;
+    }
+    s = strm->state;
+
+    if (strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+        (s->status == FINISH_STATE && flush != Z_FINISH)) {
+        ERR_RETURN(strm, Z_STREAM_ERROR);
+    }
+    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
+
+    s->strm = strm; /* just in case */
+    old_flush = s->last_flush;
+    s->last_flush = flush;
+
+    /* Write the header */
+    if (s->status == INIT_STATE) {
+#ifdef GZIP
+        if (s->wrap == 2) {
+            strm->adler = crc32(0L, Z_NULL, 0);
+            put_byte(s, 31);
+            put_byte(s, 139);
+            put_byte(s, 8);
+            if (s->gzhead == Z_NULL) {
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, 0);
+                put_byte(s, s->level == 9 ? 2 :
+                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                             4 : 0));
+                put_byte(s, OS_CODE);
+                s->status = BUSY_STATE;
+            }
+            else {
+                put_byte(s, (s->gzhead->text ? 1 : 0) +
+                            (s->gzhead->hcrc ? 2 : 0) +
+                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
+                            (s->gzhead->name == Z_NULL ? 0 : 8) +
+                            (s->gzhead->comment == Z_NULL ? 0 : 16)
+                        );
+                put_byte(s, (Byte)(s->gzhead->time & 0xff));
+                put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+                put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+                put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+                put_byte(s, s->level == 9 ? 2 :
+                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                             4 : 0));
+                put_byte(s, s->gzhead->os & 0xff);
+                if (s->gzhead->extra != Z_NULL) {
+                    put_byte(s, s->gzhead->extra_len & 0xff);
+                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+                }
+                if (s->gzhead->hcrc)
+                    strm->adler = crc32(strm->adler, s->pending_buf,
+                                        s->pending);
+                s->gzindex = 0;
+                s->status = EXTRA_STATE;
+            }
+        }
+        else
+#endif
+        {
+            uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+            uInt level_flags;
+
+            if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
+                level_flags = 0;
+            else if (s->level < 6)
+                level_flags = 1;
+            else if (s->level == 6)
+                level_flags = 2;
+            else
+                level_flags = 3;
+            header |= (level_flags << 6);
+            if (s->strstart != 0) header |= PRESET_DICT;
+            header += 31 - (header % 31);
+
+            s->status = BUSY_STATE;
+            putShortMSB(s, header);
+
+            /* Save the adler32 of the preset dictionary: */
+            if (s->strstart != 0) {
+                putShortMSB(s, (uInt)(strm->adler >> 16));
+                putShortMSB(s, (uInt)(strm->adler & 0xffff));
+            }
+            strm->adler = adler32(0L, Z_NULL, 0);
+        }
+    }
+#ifdef GZIP
+    if (s->status == EXTRA_STATE) {
+        if (s->gzhead->extra != Z_NULL) {
+            uInt beg = s->pending;  /* start of bytes to update crc */
+
+            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size)
+                        break;
+                }
+                put_byte(s, s->gzhead->extra[s->gzindex]);
+                s->gzindex++;
+            }
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (s->gzindex == s->gzhead->extra_len) {
+                s->gzindex = 0;
+                s->status = NAME_STATE;
+            }
+        }
+        else
+            s->status = NAME_STATE;
+    }
+    if (s->status == NAME_STATE) {
+        if (s->gzhead->name != Z_NULL) {
+            uInt beg = s->pending;  /* start of bytes to update crc */
+            int val;
+
+            do {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size) {
+                        val = 1;
+                        break;
+                    }
+                }
+                val = s->gzhead->name[s->gzindex++];
+                put_byte(s, val);
+            } while (val != 0);
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (val == 0) {
+                s->gzindex = 0;
+                s->status = COMMENT_STATE;
+            }
+        }
+        else
+            s->status = COMMENT_STATE;
+    }
+    if (s->status == COMMENT_STATE) {
+        if (s->gzhead->comment != Z_NULL) {
+            uInt beg = s->pending;  /* start of bytes to update crc */
+            int val;
+
+            do {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size) {
+                        val = 1;
+                        break;
+                    }
+                }
+                val = s->gzhead->comment[s->gzindex++];
+                put_byte(s, val);
+            } while (val != 0);
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (val == 0)
+                s->status = HCRC_STATE;
+        }
+        else
+            s->status = HCRC_STATE;
+    }
+    if (s->status == HCRC_STATE) {
+        if (s->gzhead->hcrc) {
+            if (s->pending + 2 > s->pending_buf_size)
+                flush_pending(strm);
+            if (s->pending + 2 <= s->pending_buf_size) {
+                put_byte(s, (Byte)(strm->adler & 0xff));
+                put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+                strm->adler = crc32(0L, Z_NULL, 0);
+                s->status = BUSY_STATE;
+            }
+        }
+        else
+            s->status = BUSY_STATE;
+    }
+#endif
+
+    /* Flush as much pending output as possible */
+    if (s->pending != 0) {
+        flush_pending(strm);
+        if (strm->avail_out == 0) {
+            /* Since avail_out is 0, deflate will be called again with
+             * more output space, but possibly with both pending and
+             * avail_in equal to zero. There won't be anything to do,
+             * but this is not an error situation so make sure we
+             * return OK instead of BUF_ERROR at next call of deflate:
+             */
+            s->last_flush = -1;
+            return Z_OK;
+        }
+
+    /* Make sure there is something to do and avoid duplicate consecutive
+     * flushes. For repeated and useless calls with Z_FINISH, we keep
+     * returning Z_STREAM_END instead of Z_BUF_ERROR.
+     */
+    } else if (strm->avail_in == 0 && flush <= old_flush &&
+               flush != Z_FINISH) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* User must not provide more input after the first FINISH: */
+    if (s->status == FINISH_STATE && strm->avail_in != 0) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* Start a new block or continue the current one.
+     */
+    if (strm->avail_in != 0 || s->lookahead != 0 ||
+        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+        block_state bstate;
+
+        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
+                        (*(configuration_table[s->level].func))(s, flush));
+
+        if (bstate == finish_started || bstate == finish_done) {
+            s->status = FINISH_STATE;
+        }
+        if (bstate == need_more || bstate == finish_started) {
+            if (strm->avail_out == 0) {
+                s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+            }
+            return Z_OK;
+            /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+             * of deflate should use the same flush parameter to make sure
+             * that the flush is complete. So we don't have to output an
+             * empty block here, this will be done at next call. This also
+             * ensures that for a very small output buffer, we emit at most
+             * one empty block.
+             */
+        }
+        if (bstate == block_done) {
+            if (flush == Z_PARTIAL_FLUSH) {
+                _tr_align(s);
+            } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
+                _tr_stored_block(s, (char*)0, 0L, 0);
+                /* For a full flush, this empty block will be recognized
+                 * as a special marker by inflate_sync().
+                 */
+                if (flush == Z_FULL_FLUSH) {
+                    CLEAR_HASH(s);             /* forget history */
+                    if (s->lookahead == 0) {
+                        s->strstart = 0;
+                        s->block_start = 0L;
+                    }
+                }
+            }
+            flush_pending(strm);
+            if (strm->avail_out == 0) {
+              s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+              return Z_OK;
+            }
+        }
+    }
+    Assert(strm->avail_out > 0, "bug2");
+
+    if (flush != Z_FINISH) return Z_OK;
+    if (s->wrap <= 0) return Z_STREAM_END;
+
+    /* Write the trailer */
+#ifdef GZIP
+    if (s->wrap == 2) {
+        put_byte(s, (Byte)(strm->adler & 0xff));
+        put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+        put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
+        put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
+        put_byte(s, (Byte)(strm->total_in & 0xff));
+        put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
+        put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
+        put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
+    }
+    else
+#endif
+    {
+        putShortMSB(s, (uInt)(strm->adler >> 16));
+        putShortMSB(s, (uInt)(strm->adler & 0xffff));
+    }
+    flush_pending(strm);
+    /* If avail_out is zero, the application will call deflate again
+     * to flush the rest.
+     */
+    if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
+    return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateEnd (strm)
+    z_streamp strm;
+{
+    int status;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+
+    status = strm->state->status;
+    if (status != INIT_STATE &&
+        status != EXTRA_STATE &&
+        status != NAME_STATE &&
+        status != COMMENT_STATE &&
+        status != HCRC_STATE &&
+        status != BUSY_STATE &&
+        status != FINISH_STATE) {
+      return Z_STREAM_ERROR;
+    }
+
+    /* Deallocate in reverse order of allocations: */
+    TRY_FREE(strm, strm->state->pending_buf);
+    TRY_FREE(strm, strm->state->head);
+    TRY_FREE(strm, strm->state->prev);
+    TRY_FREE(strm, strm->state->window);
+
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+
+    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+    z_streamp dest;
+    z_streamp source;
+{
+#ifdef MAXSEG_64K
+    return Z_STREAM_ERROR;
+#else
+    deflate_state *ds;
+    deflate_state *ss;
+    ushf *overlay;
+
+
+    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+        return Z_STREAM_ERROR;
+    }
+
+    ss = source->state;
+
+    zmemcpy(dest, source, sizeof(z_stream));
+
+    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+    if (ds == Z_NULL) return Z_MEM_ERROR;
+    dest->state = (struct internal_state FAR *) ds;
+    zmemcpy(ds, ss, sizeof(deflate_state));
+    ds->strm = dest;
+
+    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
+    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
+    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+    ds->pending_buf = (uchf *) overlay;
+
+    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+        ds->pending_buf == Z_NULL) {
+        deflateEnd (dest);
+        return Z_MEM_ERROR;
+    }
+    /* following zmemcpy do not work for 16-bit MSDOS */
+    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+    ds->l_desc.dyn_tree = ds->dyn_ltree;
+    ds->d_desc.dyn_tree = ds->dyn_dtree;
+    ds->bl_desc.dyn_tree = ds->bl_tree;
+
+    return Z_OK;
+#endif /* MAXSEG_64K */
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read.  All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local int read_buf(strm, buf, size)
+    z_streamp strm;
+    Bytef *buf;
+    unsigned size;
+{
+    unsigned len = strm->avail_in;
+
+    if (len > size) len = size;
+    if (len == 0) return 0;
+
+    strm->avail_in  -= len;
+
+    if (strm->state->wrap == 1) {
+        strm->adler = adler32(strm->adler, strm->next_in, len);
+    }
+#ifdef GZIP
+    else if (strm->state->wrap == 2) {
+        strm->adler = crc32(strm->adler, strm->next_in, len);
+    }
+#endif
+    zmemcpy(buf, strm->next_in, len);
+    strm->next_in  += len;
+    strm->total_in += len;
+
+    return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init (s)
+    deflate_state *s;
+{
+    s->window_size = (ulg)2L*s->w_size;
+
+    CLEAR_HASH(s);
+
+    /* Set the default configuration parameters:
+     */
+    s->max_lazy_match   = configuration_table[s->level].max_lazy;
+    s->good_match       = configuration_table[s->level].good_length;
+    s->nice_match       = configuration_table[s->level].nice_length;
+    s->max_chain_length = configuration_table[s->level].max_chain;
+
+    s->strstart = 0;
+    s->block_start = 0L;
+    s->lookahead = 0;
+    s->match_length = s->prev_length = MIN_MATCH-1;
+    s->match_available = 0;
+    s->ins_h = 0;
+#ifndef FASTEST
+#ifdef ASMV
+    match_init(); /* initialize the asm code */
+#endif
+#endif
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+#ifndef ASMV
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ushf*)scan;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2.  Note that the checks below
+         * for insufficient lookahead only occur occasionally for performance
+         * reasons.  Therefore uninitialized memory will be accessed, and
+         * conditional jumps will be made that depend on those values.
+         * However the length of the match is limited to the lookahead, so
+         * the output of deflate is not affected by the uninitialized values.
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+            *(ushf*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
+#endif /* ASMV */
+
+#else /* FASTEST */
+
+/* ---------------------------------------------------------------------------
+ * Optimized version for FASTEST only
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    Assert(cur_match < s->strstart, "no future");
+
+    match = s->window + cur_match;
+
+    /* Return failure if the match length is less than 2:
+     */
+    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+    /* The check at best_len-1 can be removed because it will be made
+     * again later. (This heuristic is not always a win.)
+     * It is not necessary to compare scan[2] and match[2] since they
+     * are always equal when the other bytes match, given that
+     * the hash keys are equal and that HASH_BITS >= 8.
+     */
+    scan += 2, match += 2;
+    Assert(*scan == *match, "match[2]?");
+
+    /* We check for insufficient lookahead only every 8th comparison;
+     * the 256th check will be made at strstart+258.
+     */
+    do {
+    } while (*++scan == *++match && *++scan == *++match &&
+             *++scan == *++match && *++scan == *++match &&
+             *++scan == *++match && *++scan == *++match &&
+             *++scan == *++match && *++scan == *++match &&
+             scan < strend);
+
+    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+    len = MAX_MATCH - (int)(strend - scan);
+
+    if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+    s->match_start = cur_match;
+    return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
+}
+
+#endif /* FASTEST */
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+local void check_match(s, start, match, length)
+    deflate_state *s;
+    IPos start, match;
+    int length;
+{
+    /* check that the match is indeed a match */
+    if (zmemcmp(s->window + match,
+                s->window + start, length) != EQUAL) {
+        fprintf(stderr, " start %u, match %u, length %d\n",
+                start, match, length);
+        do {
+            fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+        } while (--length != 0);
+        z_error("invalid match");
+    }
+    if (z_verbose > 1) {
+        fprintf(stderr,"\\[%d,%d]", start-match, length);
+        do { putc(s->window[start++], stderr); } while (--length != 0);
+    }
+}
+#else
+#  define check_match(s, start, match, length)
+#endif /* DEBUG */
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ *    At least one byte has been read, or avail_in == 0; reads are
+ *    performed for at least two bytes (required for the zip translate_eol
+ *    option -- not supported here).
+ */
+local void fill_window(s)
+    deflate_state *s;
+{
+    register unsigned n, m;
+    register Posf *p;
+    unsigned more;    /* Amount of free space at the end of the window. */
+    uInt wsize = s->w_size;
+
+    do {
+        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+        /* Deal with !@#$% 64K limit: */
+        if (sizeof(int) <= 2) {
+            if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+                more = wsize;
+
+            } else if (more == (unsigned)(-1)) {
+                /* Very unlikely, but possible on 16 bit machine if
+                 * strstart == 0 && lookahead == 1 (input done a byte at time)
+                 */
+                more--;
+            }
+        }
+
+        /* If the window is almost full and there is insufficient lookahead,
+         * move the upper half to the lower one to make room in the upper half.
+         */
+        if (s->strstart >= wsize+MAX_DIST(s)) {
+
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+            s->match_start -= wsize;
+            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
+            s->block_start -= (long) wsize;
+
+            /* Slide the hash table (could be avoided with 32 bit values
+               at the expense of memory usage). We slide even when level == 0
+               to keep the hash table consistent if we switch back to level > 0
+               later. (Using level 0 permanently is not an optimal usage of
+               zlib, so we don't care about this pathological case.)
+             */
+            n = s->hash_size;
+            p = &s->head[n];
+            do {
+                m = *--p;
+                *p = (Pos)(m >= wsize ? m-wsize : NIL);
+            } while (--n);
+
+            n = wsize;
+#ifndef FASTEST
+            p = &s->prev[n];
+            do {
+                m = *--p;
+                *p = (Pos)(m >= wsize ? m-wsize : NIL);
+                /* If n is not on any hash chain, prev[n] is garbage but
+                 * its value will never be used.
+                 */
+            } while (--n);
+#endif
+            more += wsize;
+        }
+        if (s->strm->avail_in == 0) return;
+
+        /* If there was no sliding:
+         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+         *    more == window_size - lookahead - strstart
+         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+         * => more >= window_size - 2*WSIZE + 2
+         * In the BIG_MEM or MMAP case (not yet supported),
+         *   window_size == input_size + MIN_LOOKAHEAD  &&
+         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+         * Otherwise, window_size == 2*WSIZE so more >= 2.
+         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+         */
+        Assert(more >= 2, "more < 2");
+
+        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+        s->lookahead += n;
+
+        /* Initialize the hash value now that we have some input: */
+        if (s->lookahead >= MIN_MATCH) {
+            s->ins_h = s->window[s->strstart];
+            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+            Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+        }
+        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+         * but this is not important since only literal bytes will be emitted.
+         */
+
+    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+
+    /* If the WIN_INIT bytes after the end of the current data have never been
+     * written, then zero those bytes in order to avoid memory check reports of
+     * the use of uninitialized (or uninitialised as Julian writes) bytes by
+     * the longest match routines.  Update the high water mark for the next
+     * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
+     * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+     */
+    if (s->high_water < s->window_size) {
+        ulg curr = s->strstart + (ulg)(s->lookahead);
+        ulg init;
+
+        if (s->high_water < curr) {
+            /* Previous high water mark below current data -- zero WIN_INIT
+             * bytes or up to end of window, whichever is less.
+             */
+            init = s->window_size - curr;
+            if (init > WIN_INIT)
+                init = WIN_INIT;
+            zmemzero(s->window + curr, (unsigned)init);
+            s->high_water = curr + init;
+        }
+        else if (s->high_water < (ulg)curr + WIN_INIT) {
+            /* High water mark at or above current data, but below current data
+             * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+             * to end of window, whichever is less.
+             */
+            init = (ulg)curr + WIN_INIT - s->high_water;
+            if (init > s->window_size - s->high_water)
+                init = s->window_size - s->high_water;
+            zmemzero(s->window + s->high_water, (unsigned)init);
+            s->high_water += init;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, last) { \
+   _tr_flush_block(s, (s->block_start >= 0L ? \
+                   (charf *)&s->window[(unsigned)s->block_start] : \
+                   (charf *)Z_NULL), \
+                (ulg)((long)s->strstart - s->block_start), \
+                (last)); \
+   s->block_start = s->strstart; \
+   flush_pending(s->strm); \
+   Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, last) { \
+   FLUSH_BLOCK_ONLY(s, last); \
+   if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+local block_state deflate_stored(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+     * to pending_buf_size, and each stored block has a 5 byte header:
+     */
+    ulg max_block_size = 0xffff;
+    ulg max_start;
+
+    if (max_block_size > s->pending_buf_size - 5) {
+        max_block_size = s->pending_buf_size - 5;
+    }
+
+    /* Copy as much as possible from input to output: */
+    for (;;) {
+        /* Fill the window as much as possible: */
+        if (s->lookahead <= 1) {
+
+            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+                   s->block_start >= (long)s->w_size, "slide too late");
+
+            fill_window(s);
+            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+        Assert(s->block_start >= 0L, "block gone");
+
+        s->strstart += s->lookahead;
+        s->lookahead = 0;
+
+        /* Emit a stored block if pending_buf will be full: */
+        max_start = s->block_start + max_block_size;
+        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+            /* strstart == 0 is possible when wraparound on 16-bit machine */
+            s->lookahead = (uInt)(s->strstart - max_start);
+            s->strstart = (uInt)max_start;
+            FLUSH_BLOCK(s, 0);
+        }
+        /* Flush if we may have to slide, otherwise block_start may become
+         * negative and the data will be gone:
+         */
+        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+            FLUSH_BLOCK(s, 0);
+        }
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+local block_state deflate_fast(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    IPos hash_head;       /* head of the hash chain */
+    int bflush;           /* set if current block must be flushed */
+
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+                return need_more;
+            }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        hash_head = NIL;
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         * At this point we have always match_length < MIN_MATCH
+         */
+        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            s->match_length = longest_match (s, hash_head);
+            /* longest_match() sets match_start */
+        }
+        if (s->match_length >= MIN_MATCH) {
+            check_match(s, s->strstart, s->match_start, s->match_length);
+
+            _tr_tally_dist(s, s->strstart - s->match_start,
+                           s->match_length - MIN_MATCH, bflush);
+
+            s->lookahead -= s->match_length;
+
+            /* Insert new strings in the hash table only if the match length
+             * is not too large. This saves time but degrades compression.
+             */
+#ifndef FASTEST
+            if (s->match_length <= s->max_insert_length &&
+                s->lookahead >= MIN_MATCH) {
+                s->match_length--; /* string at strstart already in table */
+                do {
+                    s->strstart++;
+                    INSERT_STRING(s, s->strstart, hash_head);
+                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+                     * always MIN_MATCH bytes ahead.
+                     */
+                } while (--s->match_length != 0);
+                s->strstart++;
+            } else
+#endif
+            {
+                s->strstart += s->match_length;
+                s->match_length = 0;
+                s->ins_h = s->window[s->strstart];
+                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+                Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+                 * matter since it will be recomputed at next deflate call.
+                 */
+            }
+        } else {
+            /* No match, output a literal byte */
+            Tracevv((stderr,"%c", s->window[s->strstart]));
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
+            s->lookahead--;
+            s->strstart++;
+        }
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+local block_state deflate_slow(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    IPos hash_head;          /* head of hash chain */
+    int bflush;              /* set if current block must be flushed */
+
+    /* Process the input block. */
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+                return need_more;
+            }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        hash_head = NIL;
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         */
+        s->prev_length = s->match_length, s->prev_match = s->match_start;
+        s->match_length = MIN_MATCH-1;
+
+        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+            s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            s->match_length = longest_match (s, hash_head);
+            /* longest_match() sets match_start */
+
+            if (s->match_length <= 5 && (s->strategy == Z_FILTERED
+#if TOO_FAR <= 32767
+                || (s->match_length == MIN_MATCH &&
+                    s->strstart - s->match_start > TOO_FAR)
+#endif
+                )) {
+
+                /* If prev_match is also MIN_MATCH, match_start is garbage
+                 * but we will ignore the current match anyway.
+                 */
+                s->match_length = MIN_MATCH-1;
+            }
+        }
+        /* If there was a match at the previous step and the current
+         * match is not better, output the previous match:
+         */
+        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+            /* Do not insert strings in hash table beyond this. */
+
+            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+                           s->prev_length - MIN_MATCH, bflush);
+
+            /* Insert in hash table all strings up to the end of the match.
+             * strstart-1 and strstart are already inserted. If there is not
+             * enough lookahead, the last two strings are not inserted in
+             * the hash table.
+             */
+            s->lookahead -= s->prev_length-1;
+            s->prev_length -= 2;
+            do {
+                if (++s->strstart <= max_insert) {
+                    INSERT_STRING(s, s->strstart, hash_head);
+                }
+            } while (--s->prev_length != 0);
+            s->match_available = 0;
+            s->match_length = MIN_MATCH-1;
+            s->strstart++;
+
+            if (bflush) FLUSH_BLOCK(s, 0);
+
+        } else if (s->match_available) {
+            /* If there was no match at the previous position, output a
+             * single literal. If there was a match but the current match
+             * is longer, truncate the previous match to a single literal.
+             */
+            Tracevv((stderr,"%c", s->window[s->strstart-1]));
+            _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+            if (bflush) {
+                FLUSH_BLOCK_ONLY(s, 0);
+            }
+            s->strstart++;
+            s->lookahead--;
+            if (s->strm->avail_out == 0) return need_more;
+        } else {
+            /* There is no previous match to compare with, wait for
+             * the next step to decide.
+             */
+            s->match_available = 1;
+            s->strstart++;
+            s->lookahead--;
+        }
+    }
+    Assert (flush != Z_NO_FLUSH, "no flush?");
+    if (s->match_available) {
+        Tracevv((stderr,"%c", s->window[s->strstart-1]));
+        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+        s->match_available = 0;
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+#endif /* FASTEST */
+
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one.  Do not maintain a hash table.  (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    int bflush;             /* set if current block must be flushed */
+    uInt prev;              /* byte at distance one to match */
+    Bytef *scan, *strend;   /* scan goes up to strend for length of run */
+
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the longest encodable run.
+         */
+        if (s->lookahead < MAX_MATCH) {
+            fill_window(s);
+            if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
+                return need_more;
+            }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* See how many times the previous byte repeats */
+        s->match_length = 0;
+        if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
+            scan = s->window + s->strstart - 1;
+            prev = *scan;
+            if (prev == *++scan && prev == *++scan && prev == *++scan) {
+                strend = s->window + s->strstart + MAX_MATCH;
+                do {
+                } while (prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         scan < strend);
+                s->match_length = MAX_MATCH - (int)(strend - scan);
+                if (s->match_length > s->lookahead)
+                    s->match_length = s->lookahead;
+            }
+        }
+
+        /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+        if (s->match_length >= MIN_MATCH) {
+            check_match(s, s->strstart, s->strstart - 1, s->match_length);
+
+            _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
+
+            s->lookahead -= s->match_length;
+            s->strstart += s->match_length;
+            s->match_length = 0;
+        } else {
+            /* No match, output a literal byte */
+            Tracevv((stderr,"%c", s->window[s->strstart]));
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
+            s->lookahead--;
+            s->strstart++;
+        }
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
+ */
+local block_state deflate_huff(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    int bflush;             /* set if current block must be flushed */
+
+    for (;;) {
+        /* Make sure that we have a literal to write. */
+        if (s->lookahead == 0) {
+            fill_window(s);
+            if (s->lookahead == 0) {
+                if (flush == Z_NO_FLUSH)
+                    return need_more;
+                break;      /* flush the current block */
+            }
+        }
+
+        /* Output a literal byte */
+        s->match_length = 0;
+        Tracevv((stderr,"%c", s->window[s->strstart]));
+        _tr_tally_lit (s, s->window[s->strstart], bflush);
+        s->lookahead--;
+        s->strstart++;
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
Index: cpukit/zlib/deflate.h
===================================================================
--- cpukit/zlib/deflate.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/deflate.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,342 @@
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2009 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef DEFLATE_H
+#define DEFLATE_H
+
+#include "zutil.h"
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip encoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GZIP
+#endif
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS  256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES   30
+/* number of distance codes */
+
+#define BL_CODES  19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define INIT_STATE    42
+#define EXTRA_STATE   69
+#define NAME_STATE    73
+#define COMMENT_STATE 91
+#define HCRC_STATE   103
+#define BUSY_STATE   113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+    union {
+        ush  freq;       /* frequency count */
+        ush  code;       /* bit string */
+    } fc;
+    union {
+        ush  dad;        /* father node in Huffman tree */
+        ush  len;        /* length of bit string */
+    } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad  dl.dad
+#define Len  dl.len
+
+typedef struct static_tree_desc_s  static_tree_desc;
+
+typedef struct tree_desc_s {
+    ct_data *dyn_tree;           /* the dynamic tree */
+    int     max_code;            /* largest code with non zero frequency */
+    static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+    z_streamp strm;      /* pointer back to this zlib stream */
+    int   status;        /* as the name implies */
+    Bytef *pending_buf;  /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
+    Bytef *pending_out;  /* next pending byte to output to the stream */
+    uInt   pending;      /* nb of bytes in the pending buffer */
+    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
+    gz_headerp  gzhead;  /* gzip header information to write */
+    uInt   gzindex;      /* where in extra, name, or comment */
+    Byte  method;        /* STORED (for zip only) or DEFLATED */
+    int   last_flush;    /* value of flush param for previous deflate call */
+
+                /* used by deflate.c: */
+
+    uInt  w_size;        /* LZ77 window size (32K by default) */
+    uInt  w_bits;        /* log2(w_size)  (8..16) */
+    uInt  w_mask;        /* w_size - 1 */
+
+    Bytef *window;
+    /* Sliding window. Input bytes are read into the second half of the window,
+     * and move to the first half later to keep a dictionary of at least wSize
+     * bytes. With this organization, matches are limited to a distance of
+     * wSize-MAX_MATCH bytes, but this ensures that IO is always
+     * performed with a length multiple of the block size. Also, it limits
+     * the window size to 64K, which is quite useful on MSDOS.
+     * To do: use the user input buffer as sliding window.
+     */
+
+    ulg window_size;
+    /* Actual size of window: 2*wSize, except when the user input buffer
+     * is directly used as sliding window.
+     */
+
+    Posf *prev;
+    /* Link to older string with same hash index. To limit the size of this
+     * array to 64K, this link is maintained only for the last 32K strings.
+     * An index in this array is thus a window index modulo 32K.
+     */
+
+    Posf *head; /* Heads of the hash chains or NIL. */
+
+    uInt  ins_h;          /* hash index of string to be inserted */
+    uInt  hash_size;      /* number of elements in hash table */
+    uInt  hash_bits;      /* log2(hash_size) */
+    uInt  hash_mask;      /* hash_size-1 */
+
+    uInt  hash_shift;
+    /* Number of bits by which ins_h must be shifted at each input
+     * step. It must be such that after MIN_MATCH steps, the oldest
+     * byte no longer takes part in the hash key, that is:
+     *   hash_shift * MIN_MATCH >= hash_bits
+     */
+
+    long block_start;
+    /* Window position at the beginning of the current output block. Gets
+     * negative when the window is moved backwards.
+     */
+
+    uInt match_length;           /* length of best match */
+    IPos prev_match;             /* previous match */
+    int match_available;         /* set if previous match exists */
+    uInt strstart;               /* start of string to insert */
+    uInt match_start;            /* start of matching string */
+    uInt lookahead;              /* number of valid bytes ahead in window */
+
+    uInt prev_length;
+    /* Length of the best match at previous step. Matches not greater than this
+     * are discarded. This is used in the lazy match evaluation.
+     */
+
+    uInt max_chain_length;
+    /* To speed up deflation, hash chains are never searched beyond this
+     * length.  A higher limit improves compression ratio but degrades the
+     * speed.
+     */
+
+    uInt max_lazy_match;
+    /* Attempt to find a better match only when the current match is strictly
+     * smaller than this value. This mechanism is used only for compression
+     * levels >= 4.
+     */
+#   define max_insert_length  max_lazy_match
+    /* Insert new strings in the hash table only if the match length is not
+     * greater than this length. This saves time but degrades compression.
+     * max_insert_length is used only for compression levels <= 3.
+     */
+
+    int level;    /* compression level (1..9) */
+    int strategy; /* favor or force Huffman coding*/
+
+    uInt good_match;
+    /* Use a faster search when the previous match is longer than this */
+
+    int nice_match; /* Stop searching when current match exceeds this */
+
+                /* used by trees.c: */
+    /* Didn't use ct_data typedef below to supress compiler warning */
+    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
+    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
+
+    struct tree_desc_s l_desc;               /* desc. for literal tree */
+    struct tree_desc_s d_desc;               /* desc. for distance tree */
+    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
+
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
+    int heap_len;               /* number of elements in the heap */
+    int heap_max;               /* element of largest frequency */
+    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+     * The same heap array is used to build all trees.
+     */
+
+    uch depth[2*L_CODES+1];
+    /* Depth of each subtree used as tie breaker for trees of equal frequency
+     */
+
+    uchf *l_buf;          /* buffer for literals or lengths */
+
+    uInt  lit_bufsize;
+    /* Size of match buffer for literals/lengths.  There are 4 reasons for
+     * limiting lit_bufsize to 64K:
+     *   - frequencies can be kept in 16 bit counters
+     *   - if compression is not successful for the first block, all input
+     *     data is still in the window so we can still emit a stored block even
+     *     when input comes from standard input.  (This can also be done for
+     *     all blocks if lit_bufsize is not greater than 32K.)
+     *   - if compression is not successful for a file smaller than 64K, we can
+     *     even emit a stored file instead of a stored block (saving 5 bytes).
+     *     This is applicable only for zip (not gzip or zlib).
+     *   - creating new Huffman trees less frequently may not provide fast
+     *     adaptation to changes in the input data statistics. (Take for
+     *     example a binary file with poorly compressible code followed by
+     *     a highly compressible string table.) Smaller buffer sizes give
+     *     fast adaptation but have of course the overhead of transmitting
+     *     trees more frequently.
+     *   - I can't count above 4
+     */
+
+    uInt last_lit;      /* running index in l_buf */
+
+    ushf *d_buf;
+    /* Buffer for distances. To simplify the code, d_buf and l_buf have
+     * the same number of elements. To use different lengths, an extra flag
+     * array would be necessary.
+     */
+
+    ulg opt_len;        /* bit length of current block with optimal trees */
+    ulg static_len;     /* bit length of current block with static trees */
+    uInt matches;       /* number of string matches in current block */
+    int last_eob_len;   /* bit length of EOB code for last block */
+
+#ifdef DEBUG
+    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
+#endif
+
+    ush bi_buf;
+    /* Output buffer. bits are inserted starting at the bottom (least
+     * significant bits).
+     */
+    int bi_valid;
+    /* Number of valid bits in bi_buf.  All bits above the last valid bit
+     * are always zero.
+     */
+
+    ulg high_water;
+    /* High water mark offset in window for initialized bytes -- bytes above
+     * this are set to zero in order to avoid memory check warnings when
+     * longest match routines access bytes past the input.  This is then
+     * updated to the new high water mark.
+     */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+#define WIN_INIT MAX_MATCH
+/* Number of bytes after end of data in window to initialize in order to avoid
+   memory checker errors from longest match routines */
+
+        /* in trees.c */
+void _tr_init         OF((deflate_state *s));
+int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
+void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
+                          int last));
+void _tr_align        OF((deflate_state *s));
+void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+                          int last));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch _length_code[];
+  extern uch _dist_code[];
+#else
+  extern const uch _length_code[];
+  extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length)
+#endif
+
+#endif /* DEFLATE_H */
Index: cpukit/zlib/doc/algorithm.txt
===================================================================
--- cpukit/zlib/doc/algorithm.txt	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/doc/algorithm.txt	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,209 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data.  The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length).  Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes.  (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast.  The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code.  It gets that many bits from the
+stream, and looks it up in the table.  The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table.  If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code.  However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table.  What inflate() does is
+simply to make the number of bits in the first table a variable, and  then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits.  Also the distance trees have 30 possible
+values, and the size of the first table is six bits.  Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like.  You are correct that it's not a Huffman tree.  It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The
+symbol could be as short as one bit or as long as 15 bits.  If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits.  For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits.  Again, there are duplicated
+entries as needed.  The idea is that most of the time the symbol will be short
+and there will only be one table look up.  (That's whole idea behind data
+compression in the first place.)  For the less frequent long symbols, there
+will be two lookups.  If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient.  For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble.  Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is?  The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols.  At the
+other extreme, you could make a new table for every bit in the code.  In fact,
+that's essentially a Huffman tree.  But then you spend too much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode as and how many bits that is, i.e. how
+many bits to gobble.  Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed.  That's compared to 64 entries for a single table.  Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table).  Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on.  For inflate, the
+meaning of a particular symbol is often more than just a letter.  It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value.  Or it might be the special end-of-block code.  The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly        Mark Adler
+jloup@gzip.org          madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+http://www.ietf.org/rfc/rfc1951.txt
Index: cpukit/zlib/gzclose.c
===================================================================
--- cpukit/zlib/gzclose.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/gzclose.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,25 @@
+/* gzclose.c -- zlib gzclose() function
+ * Copyright (C) 2004, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* gzclose() is in a separate file so that it is linked in only if it is used.
+   That way the other gzclose functions can be used instead to avoid linking in
+   unneeded compression or decompression routines. */
+int ZEXPORT gzclose(file)
+    gzFile file;
+{
+#ifndef NO_GZCOMPRESS
+    gz_statep state;
+
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
+#else
+    return gzclose_r(file);
+#endif
+}
Index: cpukit/zlib/gzguts.h
===================================================================
--- cpukit/zlib/gzguts.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/gzguts.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,132 @@
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+#  ifndef _LARGEFILE_SOURCE
+#    define _LARGEFILE_SOURCE
+#  endif
+#  ifdef _FILE_OFFSET_BITS
+#    undef _FILE_OFFSET_BITS
+#  endif
+#endif
+
+#define ZLIB_INTERNAL
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#  include <limits.h>
+#endif
+#include <fcntl.h>
+
+#ifdef NO_DEFLATE       /* for compatibility with old definition */
+#  define NO_GZCOMPRESS
+#endif
+
+#ifdef _MSC_VER
+#  include <io.h>
+#  define vsnprintf _vsnprintf
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+  extern voidp  malloc OF((uInt size));
+  extern void   free   OF((voidpf ptr));
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE && defined NO_ERRNO_H
+#  include <windows.h>
+#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+#  ifdef STDC
+#    include <errno.h>
+#    define zstrerror() strerror(errno)
+#  else
+#    define zstrerror() "stdio error (consult errno)"
+#  endif
+#endif
+
+/* MVS fdopen() */
+#ifdef __MVS__
+  #pragma map (fdopen , "\174\174FDOPEN")
+   FILE *fdopen(int, const char *);
+#endif
+
+#ifdef _LARGEFILE64_SOURCE
+#  define z_off64_t off64_t
+#else
+#  define z_off64_t z_off_t
+#endif
+
+/* default i/o buffer size -- double this for output when reading */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0      /* look for a gzip header */
+#define COPY 1      /* copy input directly */
+#define GZIP 2      /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+        /* used for both reading and writing */
+    int mode;               /* see gzip modes above */
+    int fd;                 /* file descriptor */
+    char *path;             /* path or fd for error messages */
+    z_off64_t pos;          /* current position in uncompressed data */
+    unsigned size;          /* buffer size, zero if not allocated yet */
+    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
+    unsigned char *in;      /* input buffer */
+    unsigned char *out;     /* output buffer (double-sized when reading) */
+    unsigned char *next;    /* next output data to deliver or write */
+        /* just for reading */
+    unsigned have;          /* amount of output data unused at next */
+    int eof;                /* true if end of input file reached */
+    z_off64_t start;        /* where the gzip data started, for rewinding */
+    z_off64_t raw;          /* where the raw data started, for seeking */
+    int how;                /* 0: get header, 1: copy, 2: decompress */
+    int direct;             /* true if last read direct, false if gzip */
+        /* just for writing */
+    int level;              /* compression level */
+    int strategy;           /* compression strategy */
+        /* seek request */
+    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
+    int seek;               /* true if seek request pending */
+        /* error information */
+    int err;                /* error code */
+    char *msg;              /* error message */
+        /* zlib inflate or deflate stream */
+    z_stream strm;          /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+ZEXTERN void ZEXPORT gz_error OF((gz_statep, int, const char *));
+#if defined UNDER_CE && defined NO_ERRNO_H
+ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+   value -- needed when comparing unsigned to z_off64_t, which is signed
+   (possible z_off64_t types off_t, off64_t, and long are all signed) */
+#ifdef INT_MAX
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
+#else
+ZEXTERN unsigned ZEXPORT gz_intmax OF((void));
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+#endif
Index: cpukit/zlib/gzlib.c
===================================================================
--- cpukit/zlib/gzlib.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/gzlib.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,538 @@
+/* gzlib.c -- zlib functions common to reading and writing gzip files
+ * Copyright (C) 2004, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+#ifdef _LARGEFILE64_SOURCE
+#  define LSEEK lseek64
+#else
+#  define LSEEK lseek
+#endif
+
+/* Local functions */
+local void gz_reset OF((gz_statep));
+local gzFile gz_open OF((const char *, int, const char *));
+
+#if defined UNDER_CE && defined NO_ERRNO_H
+
+/* Map the Windows error number in ERROR to a locale-dependent error message
+   string and return a pointer to it.  Typically, the values for ERROR come
+   from GetLastError.
+
+   The string pointed to shall not be modified by the application, but may be
+   overwritten by a subsequent call to gz_strwinerror
+
+   The gz_strwinerror function does not change the current setting of
+   GetLastError. */
+char ZEXPORT *gz_strwinerror (error)
+     DWORD error;
+{
+    static char buf[1024];
+
+    wchar_t *msgbuf;
+    DWORD lasterr = GetLastError();
+    DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
+        | FORMAT_MESSAGE_ALLOCATE_BUFFER,
+        NULL,
+        error,
+        0, /* Default language */
+        (LPVOID)&msgbuf,
+        0,
+        NULL);
+    if (chars != 0) {
+        /* If there is an \r\n appended, zap it.  */
+        if (chars >= 2
+            && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
+            chars -= 2;
+            msgbuf[chars] = 0;
+        }
+
+        if (chars > sizeof (buf) - 1) {
+            chars = sizeof (buf) - 1;
+            msgbuf[chars] = 0;
+        }
+
+        wcstombs(buf, msgbuf, chars + 1);
+        LocalFree(msgbuf);
+    }
+    else {
+        sprintf(buf, "unknown win32 error (%ld)", error);
+    }
+
+    SetLastError(lasterr);
+    return buf;
+}
+
+#endif /* UNDER_CE && NO_ERRNO_H */
+
+/* Reset gzip file state */
+local void gz_reset(state)
+    gz_statep state;
+{
+    if (state->mode == GZ_READ) {   /* for reading ... */
+        state->have = 0;            /* no output data available */
+        state->eof = 0;             /* not at end of file */
+        state->how = LOOK;          /* look for gzip header */
+        state->direct = 1;          /* default for empty file */
+    }
+    state->seek = 0;                /* no seek request pending */
+    gz_error(state, Z_OK, NULL);    /* clear error */
+    state->pos = 0;                 /* no uncompressed data yet */
+    state->strm.avail_in = 0;       /* no input data yet */
+}
+
+/* Open a gzip file either by name or file descriptor. */
+local gzFile gz_open(path, fd, mode)
+    const char *path;
+    int fd;
+    const char *mode;
+{
+    gz_statep state;
+
+    /* allocate gzFile structure to return */
+    state = malloc(sizeof(gz_state));
+    if (state == NULL)
+        return NULL;
+    state->size = 0;            /* no buffers allocated yet */
+    state->want = GZBUFSIZE;    /* requested buffer size */
+    state->msg = NULL;          /* no error message yet */
+
+    /* interpret mode */
+    state->mode = GZ_NONE;
+    state->level = Z_DEFAULT_COMPRESSION;
+    state->strategy = Z_DEFAULT_STRATEGY;
+    while (*mode) {
+        if (*mode >= '0' && *mode <= '9')
+            state->level = *mode - '0';
+        else
+            switch (*mode) {
+            case 'r':
+                state->mode = GZ_READ;
+                break;
+#ifndef NO_GZCOMPRESS
+            case 'w':
+                state->mode = GZ_WRITE;
+                break;
+            case 'a':
+                state->mode = GZ_APPEND;
+                break;
+#endif
+            case '+':       /* can't read and write at the same time */
+                free(state);
+                return NULL;
+            case 'b':       /* ignore -- will request binary anyway */
+                break;
+            case 'f':
+                state->strategy = Z_FILTERED;
+                break;
+            case 'h':
+                state->strategy = Z_HUFFMAN_ONLY;
+                break;
+            case 'R':
+                state->strategy = Z_RLE;
+                break;
+            case 'F':
+                state->strategy = Z_FIXED;
+            default:        /* could consider as an error, but just ignore */
+                ;
+            }
+        mode++;
+    }
+
+    /* must provide an "r", "w", or "a" */
+    if (state->mode == GZ_NONE) {
+        free(state);
+        return NULL;
+    }
+
+    /* save the path name for error messages */
+    state->path = malloc(strlen(path) + 1);
+    if (state->path == NULL) {
+        free(state);
+        return NULL;
+    }
+    strcpy(state->path, path);
+
+    /* open the file with the appropriate mode (or just use fd) */
+    state->fd = fd != -1 ? fd :
+        open(path,
+#ifdef O_LARGEFILE
+            O_LARGEFILE |
+#endif
+#ifdef O_BINARY
+            O_BINARY |
+#endif
+            (state->mode == GZ_READ ?
+                O_RDONLY :
+                (O_WRONLY | O_CREAT | (
+                    state->mode == GZ_WRITE ?
+                        O_TRUNC :
+                        O_APPEND))),
+            0666);
+    if (state->fd == -1) {
+        free(state);
+        return NULL;
+    }
+    if (state->mode == GZ_APPEND)
+        state->mode = GZ_WRITE;         /* simplify later checks */
+
+    /* save the current position for rewinding (only if reading) */
+    if (state->mode == GZ_READ) {
+        state->start = LSEEK(state->fd, 0, SEEK_CUR);
+        if (state->start == -1) state->start = 0;
+    }
+
+    /* initialize stream */
+    gz_reset(state);
+
+    /* return stream */
+    return (gzFile)state;
+}
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen(path, mode)
+    const char *path;
+    const char *mode;
+{
+    return gz_open(path, -1, mode);
+}
+
+#if (defined(_LARGEFILE64_SOURCE)||(_FILE_OFFSET_BITS == 64))
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzopen64(path, mode)
+    const char *path;
+    const char *mode;
+{
+    return gz_open(path, -1, mode);
+}
+#endif /* (defined(_LARGEFILE64_SOURCE)||(_FILE_OFFSET_BITS == 64)) */
+
+/* -- see zlib.h -- */
+gzFile ZEXPORT gzdopen(fd, mode)
+    int fd;
+    const char *mode;
+{
+    char *path;         /* identifier for error messages */
+    gzFile gz;
+
+    if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL)
+        return NULL;
+    sprintf(path, "<fd:%d>", fd);
+    gz = gz_open(path, fd, mode);
+    free(path);
+    return gz;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzbuffer(file, size)
+    gzFile file;
+    unsigned size;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* make sure we haven't already allocated memory */
+    if (state->size != 0)
+        return -1;
+
+    /* check and set requested size */
+    if (size == 0)
+        return -1;
+    state->want = size;
+    return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzrewind(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no error */
+    if (state->mode != GZ_READ || state->err != Z_OK)
+        return -1;
+
+    /* back up and start over */
+    if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
+        return -1;
+    gz_reset(state);
+    return 0;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gzseek64(file, offset, whence)
+    gzFile file;
+    z_off64_t offset;
+    int whence;
+{
+    unsigned n;
+    z_off64_t ret;
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* check that there's no error */
+    if (state->err != Z_OK)
+        return -1;
+
+    /* can only seek from start or relative to current position */
+    if (whence != SEEK_SET && whence != SEEK_CUR)
+        return -1;
+
+    /* normalize offset to a SEEK_CUR specification */
+    if (whence == SEEK_SET)
+        offset -= state->pos;
+    else if (state->seek)
+        offset += state->skip;
+    state->seek = 0;
+
+    /* if within raw area while reading, just go there */
+    if (state->mode == GZ_READ && state->how == COPY &&
+        state->pos + offset >= state->raw) {
+        ret = LSEEK(state->fd, offset, SEEK_CUR);
+        if (ret == -1)
+            return -1;
+        state->have = 0;
+        state->eof = 0;
+        state->seek = 0;
+        gz_error(state, Z_OK, NULL);
+        state->strm.avail_in = 0;
+        state->pos += offset;
+        return state->pos;
+    }
+
+    /* calculate skip amount, rewinding if needed for back seek when reading */
+    if (offset < 0) {
+        if (state->mode != GZ_READ)         /* writing -- can't go backwards */
+            return -1;
+        offset += state->pos;
+        if (offset < 0)                     /* before start of file! */
+            return -1;
+        if (gzrewind(file) == -1)           /* rewind, then skip to offset */
+            return -1;
+    }
+
+    /* if reading, skip what's in output buffer (one less gzgetc() check) */
+    if (state->mode == GZ_READ) {
+        n = GT_OFF(state->have) || (z_off64_t)state->have > offset ?
+            (unsigned)offset : state->have;
+        state->have -= n;
+        state->next += n;
+        state->pos += n;
+        offset -= n;
+    }
+
+    /* request skip (if not zero) */
+    if (offset) {
+        state->seek = 1;
+        state->skip = offset;
+    }
+    return state->pos + offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzseek(file, offset, whence)
+    gzFile file;
+    z_off_t offset;
+    int whence;
+{
+    z_off64_t ret;
+
+    ret = gzseek64(file, (z_off64_t)offset, whence);
+    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+z_off64_t ZEXPORT gztell64(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* return position */
+    return state->pos + (state->seek ? state->skip : 0);
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gztell(file)
+    gzFile file;
+{
+    z_off64_t ret;
+
+    ret = gztell64(file);
+    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+
+z_off64_t ZEXPORT gzoffset64(file)
+    gzFile file;
+{
+    z_off64_t offset;
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return -1;
+
+    /* compute and return effective offset in file */
+    offset = LSEEK(state->fd, 0, SEEK_CUR);
+    if (offset == -1)
+        return -1;
+    if (state->mode == GZ_READ)             /* reading */
+        offset -= state->strm.avail_in;     /* don't count buffered input */
+    return offset;
+}
+
+/* -- see zlib.h -- */
+z_off_t ZEXPORT gzoffset(file)
+    gzFile file;
+{
+    z_off64_t ret;
+
+    ret = gzoffset64(file);
+    return ret == (z_off_t)ret ? (z_off_t)ret : -1;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzeof(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return 0;
+
+    /* return end-of-file state */
+    return state->mode == GZ_READ ? (state->eof && state->have == 0) : 0;
+}
+
+/* -- see zlib.h -- */
+const char * ZEXPORT gzerror(file, errnum)
+    gzFile file;
+    int *errnum;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return NULL;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return NULL;
+
+    /* return error information */
+    if (errnum != NULL)
+        *errnum = state->err;
+    return state->msg == NULL ? "" : state->msg;
+}
+
+/* -- see zlib.h -- */
+void ZEXPORT gzclearerr(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure and check integrity */
+    if (file == NULL)
+        return;
+    state = (gz_statep)file;
+    if (state->mode != GZ_READ && state->mode != GZ_WRITE)
+        return;
+
+    /* clear error and end-of-file */
+    if (state->mode == GZ_READ)
+        state->eof = 0;
+    gz_error(state, Z_OK, NULL);
+}
+
+/* Create an error message in allocated memory and set state->err and
+   state->msg accordingly.  Free any previous error message already there.  Do
+   not try to free or allocate space if the error is Z_MEM_ERROR (out of
+   memory).  Simply save the error message as a static string.  If there is an
+   allocation failure constructing the error message, then convert the error to
+   out of memory. */
+void ZEXPORT gz_error(state, err, msg)
+    gz_statep state;
+    int err;
+    const char *msg;
+{
+    /* free previously allocated message and clear */
+    if (state->msg != NULL) {
+        if (state->err != Z_MEM_ERROR)
+            free(state->msg);
+        state->msg = NULL;
+    }
+
+    /* set error code, and if no message, then done */
+    state->err = err;
+    if (msg == NULL)
+        return;
+
+    /* for an out of memory error, save as static string */
+    if (err == Z_MEM_ERROR) {
+        state->msg = (char *)msg;
+        return;
+    }
+
+    /* construct error message with path */
+    if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) {
+        state->err = Z_MEM_ERROR;
+        state->msg = (char *)"out of memory";
+        return;
+    }
+    strcpy(state->msg, state->path);
+    strcat(state->msg, ": ");
+    strcat(state->msg, msg);
+    return;
+}
+
+#ifndef INT_MAX
+/* portably return maximum value for an int (when limits.h presumed not
+   available) -- we need to do this to cover cases where 2's complement not
+   used, since C standard permits 1's complement and sign-bit representations,
+   otherwise we could just use ((unsigned)-1) >> 1 */
+unsigned ZEXPORT gz_intmax()
+{
+    unsigned p, q;
+
+    p = 1;
+    do {
+        q = p;
+        p <<= 1;
+        p++;
+    } while (p > q);
+    return q >> 1;
+}
+#endif
Index: cpukit/zlib/gzread.c
===================================================================
--- cpukit/zlib/gzread.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/gzread.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,652 @@
+/* gzread.c -- zlib functions for reading gzip files
+ * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
+local int gz_avail OF((gz_statep));
+local int gz_next4 OF((gz_statep, unsigned long *));
+local int gz_head OF((gz_statep));
+local int gz_decomp OF((gz_statep));
+local int gz_make OF((gz_statep));
+local int gz_skip OF((gz_statep, z_off64_t));
+
+/* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
+   state->fd, and update state->eof, state->err, and state->msg as appropriate.
+   This function needs to loop on read(), since read() is not guaranteed to
+   read the number of bytes requested, depending on the type of descriptor. */
+local int gz_load(state, buf, len, have)
+    gz_statep state;
+    unsigned char *buf;
+    unsigned len;
+    unsigned *have;
+{
+    int ret;
+
+    *have = 0;
+    do {
+        ret = read(state->fd, buf + *have, len - *have);
+        if (ret <= 0)
+            break;
+        *have += ret;
+    } while (*have < len);
+    if (ret < 0) {
+        gz_error(state, Z_ERRNO, zstrerror());
+        return -1;
+    }
+    if (ret == 0)
+        state->eof = 1;
+    return 0;
+}
+
+/* Load up input buffer and set eof flag if last data loaded -- return -1 on
+   error, 0 otherwise.  Note that the eof flag is set when the end of the input
+   file is reached, even though there may be unused data in the buffer.  Once
+   that data has been used, no more attempts will be made to read the file.
+   gz_avail() assumes that strm->avail_in == 0. */
+local int gz_avail(state)
+    gz_statep state;
+{
+    z_streamp strm = &(state->strm);
+
+    if (state->err != Z_OK)
+        return -1;
+    if (state->eof == 0) {
+        if (gz_load(state, state->in, state->size, &(strm->avail_in)) == -1)
+            return -1;
+        strm->next_in = state->in;
+    }
+    return 0;
+}
+
+/* Get next byte from input, or -1 if end or error. */
+#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \
+                (strm->avail_in == 0 ? -1 : \
+                 (strm->avail_in--, *(strm->next_in)++)))
+
+/* Get a four-byte little-endian integer and return 0 on success and the value
+   in *ret.  Otherwise -1 is returned and *ret is not modified. */
+local int gz_next4(state, ret)
+    gz_statep state;
+    unsigned long *ret;
+{
+    int ch;
+    unsigned long val;
+    z_streamp strm = &(state->strm);
+
+    val = NEXT();
+    val += (unsigned)NEXT() << 8;
+    val += (unsigned long)NEXT() << 16;
+    ch = NEXT();
+    if (ch == -1)
+        return -1;
+    val += (unsigned long)ch << 24;
+    *ret = val;
+    return 0;
+}
+
+/* Look for gzip header, set up for inflate or copy.  state->have must be zero.
+   If this is the first time in, allocate required memory.  state->how will be
+   left unchanged if there is no more input data available, will be set to COPY
+   if there is no gzip header and direct copying will be performed, or it will
+   be set to GZIP for decompression, and the gzip header will be skipped so
+   that the next available input data is the raw deflate stream.  If direct
+   copying, then leftover input data from the input buffer will be copied to
+   the output buffer.  In that case, all further file reads will be directly to
+   either the output buffer or a user buffer.  If decompressing, the inflate
+   state and the check value will be initialized.  gz_head() will return 0 on
+   success or -1 on failure.  Failures may include read errors or gzip header
+   errors.  */
+local int gz_head(state)
+    gz_statep state;
+{
+    z_streamp strm = &(state->strm);
+    int flags;
+    unsigned len;
+
+    /* allocate read buffers and inflate memory */
+    if (state->size == 0) {
+        /* allocate buffers */
+        state->in = malloc(state->want);
+        state->out = malloc(state->want << 1);
+        if (state->in == NULL || state->out == NULL) {
+            if (state->out != NULL)
+                free(state->out);
+            if (state->in != NULL)
+                free(state->in);
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+        state->size = state->want;
+
+        /* allocate inflate memory */
+        state->strm.zalloc = Z_NULL;
+        state->strm.zfree = Z_NULL;
+        state->strm.opaque = Z_NULL;
+        state->strm.avail_in = 0;
+        state->strm.next_in = Z_NULL;
+        if (inflateInit2(&(state->strm), -15) != Z_OK) {    /* raw inflate */
+            free(state->out);
+            free(state->in);
+            state->size = 0;
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+    }
+
+    /* get some data in the input buffer */
+    if (strm->avail_in == 0) {
+        if (gz_avail(state) == -1)
+            return -1;
+        if (strm->avail_in == 0)
+            return 0;
+    }
+
+    /* look for the gzip magic header bytes 31 and 139 */
+    if (strm->next_in[0] == 31) {
+        strm->avail_in--;
+        strm->next_in++;
+        if (strm->avail_in == 0 && gz_avail(state) == -1)
+            return -1;
+        if (strm->avail_in && strm->next_in[0] == 139) {
+            /* we have a gzip header, woo hoo! */
+            strm->avail_in--;
+            strm->next_in++;
+
+            /* skip rest of header */
+            if (NEXT() != 8) {      /* compression method */
+                gz_error(state, Z_DATA_ERROR, "unknown compression method");
+                return -1;
+            }
+            flags = NEXT();
+            if (flags & 0xe0) {     /* reserved flag bits */
+                gz_error(state, Z_DATA_ERROR, "unknown header flags set");
+                return -1;
+            }
+            NEXT();                 /* modification time */
+            NEXT();
+            NEXT();
+            NEXT();
+            NEXT();                 /* extra flags */
+            NEXT();                 /* operating system */
+            if (flags & 4) {        /* extra field */
+                len = (unsigned)NEXT();
+                len += (unsigned)NEXT() << 8;
+                while (len--)
+                    if (NEXT() < 0)
+                        break;
+            }
+            if (flags & 8)          /* file name */
+                while (NEXT() > 0)
+                    ;
+            if (flags & 16)         /* comment */
+                while (NEXT() > 0)
+                    ;
+            if (flags & 2) {        /* header crc */
+                NEXT();
+                NEXT();
+            }
+            /* an unexpected end of file is not checked for here -- it will be
+               noticed on the first request for uncompressed data */
+
+            /* set up for decompression */
+            inflateReset(strm);
+            strm->adler = crc32(0L, Z_NULL, 0);
+            state->how = GZIP;
+            state->direct = 0;
+            return 0;
+        }
+        else {
+            /* not a gzip file -- save first byte (31) and fall to raw i/o */
+            state->out[0] = 31;
+            state->have = 1;
+        }
+    }
+
+    /* doing raw i/o, save start of raw data for seeking, copy any leftover
+       input to output -- this assumes that the output buffer is larger than
+       the input buffer, which also assures space for gzungetc() */
+    state->raw = state->pos;
+    state->next = state->out;
+    if (strm->avail_in) {
+        memcpy(state->next + state->have, strm->next_in, strm->avail_in);
+        state->have += strm->avail_in;
+        strm->avail_in = 0;
+    }
+    state->how = COPY;
+    state->direct = 1;
+    return 0;
+}
+
+/* Decompress from input to the provided next_out and avail_out in the state.
+   If the end of the compressed data is reached, then verify the gzip trailer
+   check value and length (modulo 2^32).  state->have and state->next are set
+   to point to the just decompressed data, and the crc is updated.  If the
+   trailer is verified, state->how is reset to LOOK to look for the next gzip
+   stream or raw data, once state->have is depleted.  Returns 0 on success, -1
+   on failure.  Failures may include invalid compressed data or a failed gzip
+   trailer verification. */
+local int gz_decomp(state)
+    gz_statep state;
+{
+    int ret;
+    unsigned had;
+    unsigned long crc, len;
+    z_streamp strm = &(state->strm);
+
+    /* fill output buffer up to end of deflate stream */
+    had = strm->avail_out;
+    do {
+        /* get more input for inflate() */
+        if (strm->avail_in == 0 && gz_avail(state) == -1)
+            return -1;
+        if (strm->avail_in == 0) {
+            gz_error(state, Z_DATA_ERROR, "unexpected end of file");
+            return -1;
+        }
+
+        /* decompress and handle errors */
+        ret = inflate(strm, Z_NO_FLUSH);
+        if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
+            gz_error(state, Z_STREAM_ERROR,
+                      "internal error: inflate stream corrupt");
+            return -1;
+        }
+        if (ret == Z_MEM_ERROR) {
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+        if (ret == Z_DATA_ERROR) {              /* deflate stream invalid */
+            gz_error(state, Z_DATA_ERROR,
+                      strm->msg == NULL ? "compressed data error" : strm->msg);
+            return -1;
+        }
+    } while (strm->avail_out && ret != Z_STREAM_END);
+
+    /* update available output and crc check value */
+    state->have = had - strm->avail_out;
+    state->next = strm->next_out - state->have;
+    strm->adler = crc32(strm->adler, state->next, state->have);
+
+    /* check gzip trailer if at end of deflate stream */
+    if (ret == Z_STREAM_END) {
+        if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) {
+            gz_error(state, Z_DATA_ERROR, "unexpected end of file");
+            return -1;
+        }
+        if (crc != strm->adler) {
+            gz_error(state, Z_DATA_ERROR, "incorrect data check");
+            return -1;
+        }
+        if (len != (strm->total_out & 0xffffffffL)) {
+            gz_error(state, Z_DATA_ERROR, "incorrect length check");
+            return -1;
+        }
+        state->how = LOOK;      /* ready for next stream, once have is 0 (leave
+                                   state->direct unchanged to remember how) */
+    }
+
+    /* good decompression */
+    return 0;
+}
+
+/* Make data and put in the output buffer.  Assumes that state->have == 0.
+   Data is either copied from the input file or decompressed from the input
+   file depending on state->how.  If state->how is LOOK, then a gzip header is
+   looked for (and skipped if found) to determine wither to copy or decompress.
+   Returns -1 on error, otherwise 0.  gz_make() will leave state->have as COPY
+   or GZIP unless the end of the input file has been reached and all data has
+   been processed.  */
+local int gz_make(state)
+    gz_statep state;
+{
+    z_streamp strm = &(state->strm);
+
+    if (state->how == LOOK) {           /* look for gzip header */
+        if (gz_head(state) == -1)
+            return -1;
+        if (state->have)                /* got some data from gz_head() */
+            return 0;
+    }
+    if (state->how == COPY) {           /* straight copy */
+        if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1)
+            return -1;
+        state->next = state->out;
+    }
+    else if (state->how == GZIP) {      /* decompress */
+        strm->avail_out = state->size << 1;
+        strm->next_out = state->out;
+        if (gz_decomp(state) == -1)
+            return -1;
+    }
+    return 0;
+}
+
+/* Skip len uncompressed bytes of output.  Return -1 on error, 0 on success. */
+local int gz_skip(state, len)
+    gz_statep state;
+    z_off64_t len;
+{
+    unsigned n;
+
+    /* skip over len bytes or reach end-of-file, whichever comes first */
+    while (len)
+        /* skip over whatever is in output buffer */
+        if (state->have) {
+            n = GT_OFF(state->have) || (z_off64_t)state->have > len ?
+                (unsigned)len : state->have;
+            state->have -= n;
+            state->next += n;
+            state->pos += n;
+            len -= n;
+        }
+
+        /* output buffer empty -- return if we're at the end of the input */
+        else if (state->eof && state->strm.avail_in == 0)
+            break;
+
+        /* need more data to skip -- load up output buffer */
+        else {
+            /* get more output, looking for header if required */
+            if (gz_make(state) == -1)
+                return -1;
+        }
+    return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzread(file, buf, len)
+    gzFile file;
+    voidp buf;
+    unsigned len;
+{
+    unsigned got, n;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're reading and that there's no error */
+    if (state->mode != GZ_READ || state->err != Z_OK)
+        return -1;
+
+    /* since an int is returned, make sure len fits in one, otherwise return
+       with an error (this avoids the flaw in the interface) */
+    if ((int)len < 0) {
+        gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
+        return -1;
+    }
+
+    /* if len is zero, avoid unnecessary operations */
+    if (len == 0)
+        return 0;
+
+    /* process a skip request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_skip(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* get len bytes to buf, or less than len if at the end */
+    got = 0;
+    do {
+        /* first just try copying data from the output buffer */
+        if (state->have) {
+            n = state->have > len ? len : state->have;
+            memcpy(buf, state->next, n);
+            state->next += n;
+            state->have -= n;
+        }
+
+        /* output buffer empty -- return if we're at the end of the input */
+        else if (state->eof && strm->avail_in == 0)
+            break;
+
+        /* need output data -- for small len or new stream load up our output
+           buffer */
+        else if (state->how == LOOK || len < (state->size << 1)) {
+            /* get more output, looking for header if required */
+            if (gz_make(state) == -1)
+                return -1;
+            continue;       /* no progress yet -- go back to memcpy() above */
+            /* the copy above assures that we will leave with space in the
+               output buffer, allowing at least one gzungetc() to succeed */
+        }
+
+        /* large len -- read directly into user buffer */
+        else if (state->how == COPY) {      /* read directly */
+            if (gz_load(state, buf, len, &n) == -1)
+                return -1;
+        }
+
+        /* large len -- decompress directly into user buffer */
+        else {  /* state->how == GZIP */
+            strm->avail_out = len;
+            strm->next_out = buf;
+            if (gz_decomp(state) == -1)
+                return -1;
+            n = state->have;
+            state->have = 0;
+        }
+
+        /* update progress */
+        len -= n;
+        buf = (char *)buf + n;
+        got += n;
+        state->pos += n;
+    } while (len);
+
+    /* return number of bytes read into user buffer (will fit in int) */
+    return (int)got;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzgetc(file)
+    gzFile file;
+{
+    int ret;
+    unsigned char buf[1];
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no error */
+    if (state->mode != GZ_READ || state->err != Z_OK)
+        return -1;
+
+    /* try output buffer (no need to check for skip request) */
+    if (state->have) {
+        state->have--;
+        state->pos++;
+        return *(state->next)++;
+    }
+
+    /* nothing there -- try gzread() */
+    ret = gzread(file, buf, 1);
+    return ret < 1 ? -1 : buf[0];
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzungetc(c, file)
+    int c;
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no error */
+    if (state->mode != GZ_READ || state->err != Z_OK)
+        return -1;
+
+    /* process a skip request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_skip(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* can't push EOF */
+    if (c < 0)
+        return -1;
+
+    /* if output buffer empty, put byte at end (allows more pushing) */
+    if (state->have == 0) {
+        state->have = 1;
+        state->next = state->out + (state->size << 1) - 1;
+        state->next[0] = c;
+        state->pos--;
+        return c;
+    }
+
+    /* if no room, give up (must have already done a gzungetc()) */
+    if (state->have == (state->size << 1)) {
+        gz_error(state, Z_BUF_ERROR, "out of room to push characters");
+        return -1;
+    }
+
+    /* slide output data if needed and insert byte before existing data */
+    if (state->next == state->out) {
+        unsigned char *src = state->out + state->have;
+        unsigned char *dest = state->out + (state->size << 1);
+        while (src > state->out)
+            *--dest = *--src;
+        state->next = dest;
+    }
+    state->have++;
+    state->next--;
+    state->next[0] = c;
+    state->pos--;
+    return c;
+}
+
+/* -- see zlib.h -- */
+char * ZEXPORT gzgets(file, buf, len)
+    gzFile file;
+    char *buf;
+    int len;
+{
+    unsigned left, n;
+    char *str;
+    unsigned char *eol;
+    gz_statep state;
+
+    /* check parameters and get internal structure */
+    if (file == NULL || buf == NULL || len < 1)
+        return NULL;
+    state = (gz_statep)file;
+
+    /* check that we're reading and that there's no error */
+    if (state->mode != GZ_READ || state->err != Z_OK)
+        return NULL;
+
+    /* process a skip request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_skip(state, state->skip) == -1)
+            return NULL;
+    }
+
+    /* copy output bytes up to new line or len - 1, whichever comes first --
+       append a terminating zero to the string (we don't check for a zero in
+       the contents, let the user worry about that) */
+    str = buf;
+    left = (unsigned)len - 1;
+    if (left) do {
+        /* assure that something is in the output buffer */
+        if (state->have == 0) {
+            if (gz_make(state) == -1)
+                return NULL;            /* error */
+            if (state->have == 0) {     /* end of file */
+                if (buf == str)         /* got bupkus */
+                    return NULL;
+                break;                  /* got something -- return it */
+            }
+        }
+
+        /* look for end-of-line in current output buffer */
+        n = state->have > left ? left : state->have;
+        eol = memchr(state->next, '\n', n);
+        if (eol != NULL)
+            n = (unsigned)(eol - state->next) + 1;
+
+        /* copy through end-of-line, or remainder if not found */
+        memcpy(buf, state->next, n);
+        state->have -= n;
+        state->next += n;
+        state->pos += n;
+        left -= n;
+        buf += n;
+    } while (left && eol == NULL);
+
+    /* found end-of-line or out of space -- terminate string and return it */
+    buf[0] = 0;
+    return str;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzdirect(file)
+    gzFile file;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+
+    /* check that we're reading */
+    if (state->mode != GZ_READ)
+        return 0;
+
+    /* if the state is not known, but we can find out, then do so (this is
+       mainly for right after a gzopen() or gzdopen()) */
+    if (state->how == LOOK && state->have == 0)
+        (void)gz_head(state);
+
+    /* return 1 if reading direct, 0 if decompressing a gzip stream */
+    return state->direct;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_r(file)
+    gzFile file;
+{
+    int ret;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    /* check that we're reading */
+    if (state->mode != GZ_READ)
+        return Z_STREAM_ERROR;
+
+    /* free memory and close file */
+    if (state->size) {
+        inflateEnd(&(state->strm));
+        free(state->out);
+        free(state->in);
+    }
+    gz_error(state, Z_OK, NULL);
+    free(state->path);
+    ret = close(state->fd);
+    free(state);
+    return ret ? Z_ERRNO : Z_OK;
+}
Index: cpukit/zlib/gzwrite.c
===================================================================
--- cpukit/zlib/gzwrite.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/gzwrite.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,531 @@
+/* gzwrite.c -- zlib functions for writing gzip files
+ * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Local functions */
+local int gz_init OF((gz_statep));
+local int gz_comp OF((gz_statep, int));
+local int gz_zero OF((gz_statep, z_off64_t));
+
+/* Initialize state for writing a gzip file.  Mark initialization by setting
+   state->size to non-zero.  Return -1 on failure or 0 on success. */
+local int gz_init(state)
+    gz_statep state;
+{
+    int ret;
+    z_streamp strm = &(state->strm);
+
+    /* allocate input and output buffers */
+    state->in = malloc(state->want);
+    state->out = malloc(state->want);
+    if (state->in == NULL || state->out == NULL) {
+        if (state->out != NULL)
+            free(state->out);
+        if (state->in != NULL)
+            free(state->in);
+        gz_error(state, Z_MEM_ERROR, "out of memory");
+        return -1;
+    }
+
+    /* allocate deflate memory, set up for gzip compression */
+    strm->zalloc = Z_NULL;
+    strm->zfree = Z_NULL;
+    strm->opaque = Z_NULL;
+    ret = deflateInit2(strm, state->level, Z_DEFLATED,
+                       15 + 16, 8, state->strategy);
+    if (ret != Z_OK) {
+        free(state->in);
+        gz_error(state, Z_MEM_ERROR, "out of memory");
+        return -1;
+    }
+
+    /* mark state as initialized */
+    state->size = state->want;
+
+    /* initialize write buffer */
+    strm->avail_out = state->size;
+    strm->next_out = state->out;
+    state->next = strm->next_out;
+    return 0;
+}
+
+/* Compress whatever is at avail_in and next_in and write to the output file.
+   Return -1 if there is an error writing to the output file, otherwise 0.
+   flush is assumed to be a valid deflate() flush value.  If flush is Z_FINISH,
+   then the deflate() state is reset to start a new gzip stream. */
+local int gz_comp(state, flush)
+    gz_statep state;
+    int flush;
+{
+    int ret, got;
+    unsigned have;
+    z_streamp strm = &(state->strm);
+
+    /* allocate memory if this is the first time through */
+    if (state->size == 0 && gz_init(state) == -1)
+        return -1;
+
+    /* run deflate() on provided input until it produces no more output */
+    ret = Z_OK;
+    do {
+        /* write out current buffer contents if full, or if flushing, but if
+           doing Z_FINISH then don't write until we get to Z_STREAM_END */
+        if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
+            (flush != Z_FINISH || ret == Z_STREAM_END))) {
+            have = (unsigned)(strm->next_out - state->next);
+            if (have && ((got = write(state->fd, state->next, have)) < 0 ||
+                         (unsigned)got != have)) {
+                gz_error(state, Z_ERRNO, zstrerror());
+                return -1;
+            }
+            if (strm->avail_out == 0) {
+                strm->avail_out = state->size;
+                strm->next_out = state->out;
+            }
+            state->next = strm->next_out;
+        }
+
+        /* compress */
+        have = strm->avail_out;
+        ret = deflate(strm, flush);
+        if (ret == Z_STREAM_ERROR) {
+            gz_error(state, Z_STREAM_ERROR,
+                      "internal error: deflate stream corrupt");
+            return -1;
+        }
+        have -= strm->avail_out;
+    } while (have);
+
+    /* if that completed a deflate stream, allow another to start */
+    if (flush == Z_FINISH)
+        deflateReset(strm);
+
+    /* all done, no errors */
+    return 0;
+}
+
+/* Compress len zeros to output.  Return -1 on error, 0 on success. */
+local int gz_zero(state, len)
+    gz_statep state;
+    z_off64_t len;
+{
+    int first;
+    unsigned n;
+    z_streamp strm = &(state->strm);
+
+    /* consume whatever's left in the input buffer */
+    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        return -1;
+
+    /* compress len zeros (len guaranteed > 0) */
+    first = 1;
+    while (len) {
+        n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
+            (unsigned)len : state->size;
+        if (first) {
+            memset(state->in, 0, n);
+            first = 0;
+        }
+        strm->avail_in = n;
+        strm->next_in = state->in;
+        state->pos += n;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return -1;
+        len -= n;
+    }
+    return 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(file, buf, len)
+    gzFile file;
+    voidpc buf;
+    unsigned len;
+{
+    unsigned put = len;
+    unsigned n;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* since an int is returned, make sure len fits in one, otherwise return
+       with an error (this avoids the flaw in the interface) */
+    if ((int)len < 0) {
+        gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
+        return 0;
+    }
+
+    /* if len is zero, avoid unnecessary operations */
+    if (len == 0)
+        return 0;
+
+    /* allocate memory if this is the first time through */
+    if (state->size == 0 && gz_init(state) == -1)
+        return 0;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return 0;
+    }
+
+    /* for small len, copy to input buffer, otherwise compress directly */
+    if (len < state->size) {
+        /* copy to input buffer, compress when full */
+        do {
+            if (strm->avail_in == 0)
+                strm->next_in = state->in;
+            n = state->size - strm->avail_in;
+            if (n > len)
+                n = len;
+            memcpy(strm->next_in + strm->avail_in, buf, n);
+            strm->avail_in += n;
+            state->pos += n;
+            buf = (char *)buf + n;
+            len -= n;
+            if (len && gz_comp(state, Z_NO_FLUSH) == -1)
+                return 0;
+        } while (len);
+    }
+    else {
+        /* consume whatever's left in the input buffer */
+        if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+            return 0;
+
+        /* directly compress user buffer to file */
+        strm->avail_in = len;
+        strm->next_in = (voidp)buf;
+        state->pos += len;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return 0;
+    }
+
+    /* input was all buffered or compressed (put will fit in int) */
+    return (int)put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputc(file, c)
+    gzFile file;
+    int c;
+{
+    unsigned char buf[1];
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return -1;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* try writing to input buffer for speed (state->size == 0 if buffer not
+       initialized) */
+    if (strm->avail_in < state->size) {
+        if (strm->avail_in == 0)
+            strm->next_in = state->in;
+        strm->next_in[strm->avail_in++] = c;
+        state->pos++;
+        return c;
+    }
+
+    /* no room in buffer or not initialized, use gz_write() */
+    buf[0] = c;
+    if (gzwrite(file, buf, 1) != 1)
+        return -1;
+    return c;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputs(file, str)
+    gzFile file;
+    const char *str;
+{
+    int ret;
+    unsigned len;
+
+    /* write string */
+    len = (unsigned)strlen(str);
+    ret = gzwrite(file, str, len);
+    return ret == 0 && len != 0 ? -1 : ret;
+}
+
+#ifdef STDC
+#include <stdarg.h>
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
+{
+    int size, len;
+    gz_statep state;
+    z_streamp strm;
+    va_list va;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* make sure we have some buffer space */
+    if (state->size == 0 && gz_init(state) == -1)
+        return 0;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return 0;
+    }
+
+    /* consume whatever's left in the input buffer */
+    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        return 0;
+
+    /* do the printf() into the input buffer, put length in len */
+    size = (int)(state->size);
+    state->in[size - 1] = 0;
+    va_start(va, format);
+#ifdef NO_vsnprintf
+#  ifdef HAS_vsprintf_void
+    (void)vsprintf(state->in, format, va);
+    va_end(va);
+    for (len = 0; len < size; len++)
+        if (state->in[len] == 0) break;
+#  else
+    len = vsprintf(state->in, format, va);
+    va_end(va);
+#  endif
+#else
+#  ifdef HAS_vsnprintf_void
+    (void)vsnprintf(state->in, size, format, va);
+    va_end(va);
+    len = strlen(state->in);
+#  else
+    len = vsnprintf((char *)(state->in), size, format, va);
+    va_end(va);
+#  endif
+#endif
+
+    /* check that printf() results fit in buffer */
+    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+        return 0;
+
+    /* update buffer and position, defer compression until needed */
+    strm->avail_in = (unsigned)len;
+    strm->next_in = state->in;
+    state->pos += len;
+    return len;
+}
+
+#else /* !STDC */
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+    gzFile file;
+    const char *format;
+    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+    int size, len;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* make sure we have some buffer space */
+    if (state->size == 0 && gz_init(state) == -1)
+        return 0;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return 0;
+    }
+
+    /* consume whatever's left in the input buffer */
+    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        return 0;
+
+    /* do the printf() into the input buffer, put length in len */
+    size = (int)(state->size);
+    state->in[size - 1] = 0;
+#ifdef NO_snprintf
+#  ifdef HAS_sprintf_void
+    sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    for (len = 0; len < size; len++)
+        if (state->in[len] == 0) break;
+#  else
+    len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+                a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#  endif
+#else
+#  ifdef HAS_snprintf_void
+    snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = strlen(state->in);
+#  else
+    len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#  endif
+#endif
+
+    /* check that printf() results fit in buffer */
+    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
+        return 0;
+
+    /* update buffer and position, defer compression until needed */
+    strm->avail_in = (unsigned)len;
+    strm->next_in = state->in;
+    state->pos += len;
+    return len;
+}
+
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzflush(file, flush)
+    gzFile file;
+    int flush;
+{
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return Z_STREAM_ERROR;
+
+    /* check flush parameter */
+    if (flush < 0 || flush > Z_FINISH)
+        return Z_STREAM_ERROR;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* compress remaining data with requested flush */
+    gz_comp(state, flush);
+    return state->err;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzsetparams(file, level, strategy)
+    gzFile file;
+    int level;
+    int strategy;
+{
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return Z_STREAM_ERROR;
+
+    /* if no change is requested, then do nothing */
+    if (level == state->level && strategy == state->strategy)
+        return Z_OK;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* change compression parameters for subsequent input */
+    if (state->size) {
+        /* flush previous input with previous parameters before changing */
+        if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
+            return state->err;
+        deflateParams(strm, level, strategy);
+    }
+    state->level = level;
+    state->strategy = strategy;
+    return Z_OK;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_w(file)
+    gzFile file;
+{
+    int ret = 0;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    /* check that we're writing */
+    if (state->mode != GZ_WRITE)
+        return Z_STREAM_ERROR;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        ret += gz_zero(state, state->skip);
+    }
+
+    /* flush, free memory, and close file */
+    ret += gz_comp(state, Z_FINISH);
+    (void)deflateEnd(&(state->strm));
+    free(state->out);
+    free(state->in);
+    gz_error(state, Z_OK, NULL);
+    free(state->path);
+    ret += close(state->fd);
+    free(state);
+    return ret ? Z_ERRNO : Z_OK;
+}
Index: cpukit/zlib/infback.c
===================================================================
--- cpukit/zlib/infback.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/infback.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,632 @@
+/* infback.c -- inflate using a call-back interface
+ * Copyright (C) 1995-2009 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+   This code is largely copied from inflate.c.  Normally either infback.o or
+   inflate.o would be linked into an application--not both.  The interface
+   with inffast.c is retained so that optimized assembler-coded versions of
+   inflate_fast() can be used with either inflate.c or infback.c.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+
+/*
+   strm provides memory allocation functions in zalloc and zfree, or
+   Z_NULL to use the library memory allocation functions.
+
+   windowBits is in the range 8..15, and window is a user-supplied
+   window and output buffer that is 2**windowBits bytes.
+ */
+int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
+z_streamp strm;
+int windowBits;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL || window == Z_NULL ||
+        windowBits < 8 || windowBits > 15)
+        return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+    }
+    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+                                               sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->dmax = 32768U;
+    state->wbits = windowBits;
+    state->wsize = 1U << windowBits;
+    state->window = window;
+    state->wnext = 0;
+    state->whave = 0;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+/* Macros for inflateBack(): */
+
+/* Load returned state from inflate_fast() */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Set state from registers for inflate_fast() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Assure that some input is available.  If input is requested, but denied,
+   then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+    do { \
+        if (have == 0) { \
+            have = in(in_desc, &next); \
+            if (have == 0) { \
+                next = Z_NULL; \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+   with an error if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        PULL(); \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflateBack() with
+   an error. */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/* Assure that some output space is available, by writing out the window
+   if it's full.  If the write fails, return from inflateBack() with a
+   Z_BUF_ERROR. */
+#define ROOM() \
+    do { \
+        if (left == 0) { \
+            put = state->window; \
+            left = state->wsize; \
+            state->whave = left; \
+            if (out(out_desc, put, left)) { \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/*
+   strm provides the memory allocation functions and window buffer on input,
+   and provides information on the unused input on return.  For Z_DATA_ERROR
+   returns, strm will also provide an error message.
+
+   in() and out() are the call-back input and output functions.  When
+   inflateBack() needs more input, it calls in().  When inflateBack() has
+   filled the window with output, or when it completes with data in the
+   window, it calls out() to write out the data.  The application must not
+   change the provided input until in() is called again or inflateBack()
+   returns.  The application must not change the window/output buffer until
+   inflateBack() returns.
+
+   in() and out() are called with a descriptor parameter provided in the
+   inflateBack() call.  This parameter can be a structure that provides the
+   information required to do the read or write, as well as accumulated
+   information on the input and output such as totals and check values.
+
+   in() should return zero on failure.  out() should return non-zero on
+   failure.  If either in() or out() fails, than inflateBack() returns a
+   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
+   was in() or out() that caused in the error.  Otherwise,  inflateBack()
+   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+   error, or Z_MEM_ERROR if it could not allocate memory for the state.
+   inflateBack() can also return Z_STREAM_ERROR if the input parameters
+   are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
+z_streamp strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+    struct inflate_state FAR *state;
+    unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    /* Check that the strm exists and that the state was initialized */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* Reset the state */
+    strm->msg = Z_NULL;
+    state->mode = TYPE;
+    state->last = 0;
+    state->whave = 0;
+    next = strm->next_in;
+    have = next != Z_NULL ? strm->avail_in : 0;
+    hold = 0;
+    bits = 0;
+    put = state->window;
+    left = state->wsize;
+
+    /* Inflate until end of block marked as last */
+    for (;;)
+        switch (state->mode) {
+        case TYPE:
+            /* determine and dispatch block type */
+            if (state->last) {
+                BYTEBITS();
+                state->mode = DONE;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN;              /* decode codes */
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+
+        case STORED:
+            /* get and verify stored block length */
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+
+            /* copy stored block from input to output */
+            while (state->length != 0) {
+                copy = state->length;
+                PULL();
+                ROOM();
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+
+        case TABLE:
+            /* get dynamic table entries descriptor */
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+
+            /* get code length code lengths (not a typo) */
+            state->have = 0;
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+
+            /* get length and distance code code lengths */
+            state->have = 0;
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    NEEDBITS(here.bits);
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = (unsigned)(state->lens[state->have - 1]);
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (code const FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN;
+
+        case LEN:
+            /* use inflate_fast() if we have enough input and output */
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                if (state->whave < state->wsize)
+                    state->whave = state->wsize - left;
+                inflate_fast(strm, state->wsize);
+                LOAD();
+                break;
+            }
+
+            /* get a literal, length, or end-of-block code */
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            state->length = (unsigned)here.val;
+
+            /* process literal */
+            if (here.op == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                ROOM();
+                *put++ = (unsigned char)(state->length);
+                left--;
+                state->mode = LEN;
+                break;
+            }
+
+            /* process end of block */
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->mode = TYPE;
+                break;
+            }
+
+            /* invalid code */
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+
+            /* length code -- get extra bits, if any */
+            state->extra = (unsigned)(here.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+
+            /* get distance code */
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+
+            /* get distance extra bits, if any */
+            state->extra = (unsigned)(here.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            if (state->offset > state->wsize - (state->whave < state->wsize ?
+                                                left : 0)) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+
+            /* copy match from window to output */
+            do {
+                ROOM();
+                copy = state->wsize - state->offset;
+                if (copy < left) {
+                    from = put + copy;
+                    copy = left - copy;
+                }
+                else {
+                    from = put - state->offset;
+                    copy = left;
+                }
+                if (copy > state->length) copy = state->length;
+                state->length -= copy;
+                left -= copy;
+                do {
+                    *put++ = *from++;
+                } while (--copy);
+            } while (state->length != 0);
+            break;
+
+        case DONE:
+            /* inflate stream terminated properly -- write leftover output */
+            ret = Z_STREAM_END;
+            if (left < state->wsize) {
+                if (out(out_desc, state->window, state->wsize - left))
+                    ret = Z_BUF_ERROR;
+            }
+            goto inf_leave;
+
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+
+        default:                /* can't happen, but makes compilers happy */
+            ret = Z_STREAM_ERROR;
+            goto inf_leave;
+        }
+
+    /* Return unused input */
+  inf_leave:
+    strm->next_in = next;
+    strm->avail_in = have;
+    return ret;
+}
+
+int ZEXPORT inflateBackEnd(strm)
+z_streamp strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
Index: cpukit/zlib/inffast.c
===================================================================
--- cpukit/zlib/inffast.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/inffast.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,340 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+   Based on testing to date,
+   Pre-increment preferred for:
+   - PowerPC G3 (Adler)
+   - MIPS R5000 (Randers-Pehrson)
+   Post-increment preferred for:
+   - none
+   No measurable difference:
+   - Pentium III (Anderson)
+   - M68060 (Nikl)
+ */
+#ifdef POSTINC
+#  define OFF 0
+#  define PUP(a) *(a)++
+#else
+#  define OFF 1
+#  define PUP(a) *++(a)
+#endif
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    unsigned char FAR *in;      /* local strm->next_in */
+    unsigned char FAR *last;    /* while in < last, enough input available */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code here;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in - OFF;
+    last = in + (strm->avail_in - 5);
+    out = strm->next_out - OFF;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    wnext = state->wnext;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+    do {
+        if (bits < 15) {
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+            hold += (unsigned long)(PUP(in)) << bits;
+            bits += 8;
+        }
+        here = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(here.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(here.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", here.val));
+            PUP(out) = (unsigned char)(here.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(here.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+                hold += (unsigned long)(PUP(in)) << bits;
+                bits += 8;
+            }
+            here = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(here.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(here.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(here.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(PUP(in)) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(PUP(in)) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        if (state->sane) {
+                            strm->msg =
+                                (char *)"invalid distance too far back";
+                            state->mode = BAD;
+                            break;
+                        }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        if (len <= op - whave) {
+                            do {
+                                PUP(out) = 0;
+                            } while (--len);
+                            continue;
+                        }
+                        len -= op - whave;
+                        do {
+                            PUP(out) = 0;
+                        } while (--op > whave);
+                        if (op == 0) {
+                            from = out - dist;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--len);
+                            continue;
+                        }
+#endif
+                    }
+                    from = window - OFF;
+                    if (wnext == 0) {           /* very common case */
+                        from += wsize - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    else if (wnext < op) {      /* wrap around window */
+                        from += wsize + wnext - op;
+                        op -= wnext;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = window - OFF;
+                            if (wnext < len) {  /* some from start of window */
+                                op = wnext;
+                                len -= op;
+                                do {
+                                    PUP(out) = PUP(from);
+                                } while (--op);
+                                from = out - dist;      /* rest from output */
+                            }
+                        }
+                    }
+                    else {                      /* contiguous in window */
+                        from += wnext - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                PUP(out) = PUP(from);
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    while (len > 2) {
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    }
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+                else {
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        PUP(out) = PUP(from);
+                        len -= 3;
+                    } while (len > 2);
+                    if (len) {
+                        PUP(out) = PUP(from);
+                        if (len > 1)
+                            PUP(out) = PUP(from);
+                    }
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                here = dcode[here.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            here = lcode[here.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in + OFF;
+    strm->next_out = out + OFF;
+    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+                                 257 + (end - out) : 257 - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
+}
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and wnext == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
Index: cpukit/zlib/inflate.c
===================================================================
--- cpukit/zlib/inflate.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/inflate.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,1480 @@
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0    24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ *   creation of window when not needed, minimize use of window when it is
+ *   needed, make inffast.c even faster, implement gzip decoding, and to
+ *   improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1    25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2    4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ *   to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3    22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ *   buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4    1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ *   source file infback.c to provide a call-back interface to inflate for
+ *   programs like gzip and unzip -- uses window as output buffer to avoid
+ *   window copying
+ *
+ * 1.2.beta5    1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ *   input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6    4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ *   make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7    27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0        9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ *   for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ *   and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+#  ifndef BUILDFIXED
+#    define BUILDFIXED
+#  endif
+#endif
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, unsigned out));
+#ifdef BUILDFIXED
+   void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
+                              unsigned len));
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    strm->total_in = strm->total_out = state->total = 0;
+    strm->msg = Z_NULL;
+    strm->adler = 1;        /* to support ill-conceived Java test suite */
+    state->mode = HEAD;
+    state->last = 0;
+    state->havedict = 0;
+    state->dmax = 32768U;
+    state->head = Z_NULL;
+    state->wsize = 0;
+    state->whave = 0;
+    state->wnext = 0;
+    state->hold = 0;
+    state->bits = 0;
+    state->lencode = state->distcode = state->next = state->codes;
+    state->sane = 1;
+    state->back = -1;
+    Tracev((stderr, "inflate: reset\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+    int wrap;
+    struct inflate_state FAR *state;
+
+    /* get the state */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* extract wrap request from windowBits parameter */
+    if (windowBits < 0) {
+        wrap = 0;
+        windowBits = -windowBits;
+    }
+    else {
+        wrap = (windowBits >> 4) + 1;
+#ifdef GUNZIP
+        if (windowBits < 48)
+            windowBits &= 15;
+#endif
+    }
+
+    /* set number of window bits, free window if different */
+    if (windowBits && (windowBits < 8 || windowBits > 15))
+        return Z_STREAM_ERROR;
+    if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+        ZFREE(strm, state->window);
+        state->window = Z_NULL;
+    }
+
+    /* update state and reset the rest of it */
+    state->wrap = wrap;
+    state->wbits = (unsigned)windowBits;
+    return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+    int ret;
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+    }
+    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    state = (struct inflate_state FAR *)
+            ZALLOC(strm, 1, sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->window = Z_NULL;
+    ret = inflateReset2(strm, windowBits);
+    if (ret != Z_OK) {
+        ZFREE(strm, state);
+        strm->state = Z_NULL;
+    }
+    return ret;
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (bits < 0) {
+        state->hold = 0;
+        state->bits = 0;
+        return Z_OK;
+    }
+    if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+    value &= (1L << bits) - 1;
+    state->hold += value << state->bits;
+    state->bits += bits;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+   Write out the inffixed.h that is #include'd above.  Defining MAKEFIXED also
+   defines BUILDFIXED, so the tables are built on the fly.  makefixed() writes
+   those tables to stdout, which would be piped to inffixed.h.  A small program
+   can simply call makefixed to do this:
+
+    void makefixed(void);
+
+    int main(void)
+    {
+        makefixed();
+        return 0;
+    }
+
+   Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+    a.out > inffixed.h
+ */
+void makefixed()
+{
+    unsigned low, size;
+    struct inflate_state state;
+
+    fixedtables(&state);
+    puts("    /* inffixed.h -- table for decoding fixed codes");
+    puts("     * Generated automatically by makefixed().");
+    puts("     */");
+    puts("");
+    puts("    /* WARNING: this file should *not* be used by applications.");
+    puts("       It is part of the implementation of this library and is");
+    puts("       subject to change. Applications should only use zlib.h.");
+    puts("     */");
+    puts("");
+    size = 1U << 9;
+    printf("    static const code lenfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 7) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits,
+               state.lencode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+    size = 1U << 5;
+    printf("\n    static const code distfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 6) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+               state.distcode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+}
+#endif /* MAKEFIXED */
+
+/*
+   Update the window with the last wsize (normally 32K) bytes written before
+   returning.  If window does not exist yet, create it.  This is only called
+   when a window is already in use, or when output has been written during this
+   inflate call, but the end of the deflate stream has not been reached yet.
+   It is also called to create a window for dictionary data when a dictionary
+   is loaded.
+
+   Providing output buffers larger than 32K to inflate() should provide a speed
+   advantage, since only the last 32K of output is copied to the sliding window
+   upon return from inflate(), and since all distances after the first 32K of
+   output will fall in the output data, making match copies simpler and faster.
+   The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, out)
+z_streamp strm;
+unsigned out;
+{
+    struct inflate_state FAR *state;
+    unsigned copy, dist;
+
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* if it hasn't been done already, allocate space for the window */
+    if (state->window == Z_NULL) {
+        state->window = (unsigned char FAR *)
+                        ZALLOC(strm, 1U << state->wbits,
+                               sizeof(unsigned char));
+        if (state->window == Z_NULL) return 1;
+    }
+
+    /* if window not in use yet, initialize */
+    if (state->wsize == 0) {
+        state->wsize = 1U << state->wbits;
+        state->wnext = 0;
+        state->whave = 0;
+    }
+
+    /* copy state->wsize or less output bytes into the circular window */
+    copy = out - strm->avail_out;
+    if (copy >= state->wsize) {
+        zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
+        state->wnext = 0;
+        state->whave = state->wsize;
+    }
+    else {
+        dist = state->wsize - state->wnext;
+        if (dist > copy) dist = copy;
+        zmemcpy(state->window + state->wnext, strm->next_out - copy, dist);
+        copy -= dist;
+        if (copy) {
+            zmemcpy(state->window, strm->next_out - copy, copy);
+            state->wnext = copy;
+            state->whave = state->wsize;
+        }
+        else {
+            state->wnext += dist;
+            if (state->wnext == state->wsize) state->wnext = 0;
+            if (state->whave < state->wsize) state->whave += dist;
+        }
+    }
+    return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+#  define UPDATE(check, buf, len) \
+    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+#  define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+#  define CRC2(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        check = crc32(check, hbuf, 2); \
+    } while (0)
+
+#  define CRC4(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        hbuf[2] = (unsigned char)((word) >> 16); \
+        hbuf[3] = (unsigned char)((word) >> 24); \
+        check = crc32(check, hbuf, 4); \
+    } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+   if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        if (have == 0) goto inf_leave; \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/* Reverse the bytes in a 32-bit value */
+#define REVERSE(q) \
+    ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+     (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+/*
+   inflate() uses a state machine to process as much input data and generate as
+   much output data as possible before returning.  The state machine is
+   structured roughly as follows:
+
+    for (;;) switch (state) {
+    ...
+    case STATEn:
+        if (not enough input data or output space to make progress)
+            return;
+        ... make progress ...
+        state = STATEm;
+        break;
+    ...
+    }
+
+   so when inflate() is called again, the same case is attempted again, and
+   if the appropriate resources are provided, the machine proceeds to the
+   next state.  The NEEDBITS() macro is usually the way the state evaluates
+   whether it can proceed or should return.  NEEDBITS() does the return if
+   the requested bits are not available.  The typical use of the BITS macros
+   is:
+
+        NEEDBITS(n);
+        ... do something with BITS(n) ...
+        DROPBITS(n);
+
+   where NEEDBITS(n) either returns from inflate() if there isn't enough
+   input left to load n bits into the accumulator, or it continues.  BITS(n)
+   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
+   the low n bits off the accumulator.  INITBITS() clears the accumulator
+   and sets the number of available bits to zero.  BYTEBITS() discards just
+   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
+   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+   if there is no input available.  The decoding of variable length codes uses
+   PULLBYTE() directly in order to pull just enough bytes to decode the next
+   code, and no more.
+
+   Some states loop until they get enough input, making sure that enough
+   state information is maintained to continue the loop where it left off
+   if NEEDBITS() returns in the loop.  For example, want, need, and keep
+   would all have to actually be part of the saved state in case NEEDBITS()
+   returns:
+
+    case STATEw:
+        while (want < need) {
+            NEEDBITS(n);
+            keep[want++] = BITS(n);
+            DROPBITS(n);
+        }
+        state = STATEx;
+    case STATEx:
+
+   As shown above, if the next state is also the next case, then the break
+   is omitted.
+
+   A state may also return if there is not enough output space available to
+   complete that state.  Those states are copying stored data, writing a
+   literal byte, and copying a matching string.
+
+   When returning, a "goto inf_leave" is used to update the total counters,
+   update the check value, and determine whether any progress has been made
+   during that inflate() call in order to return the proper return code.
+   Progress is defined as a change in either strm->avail_in or strm->avail_out.
+   When there is a window, goto inf_leave will update the window with the last
+   output written.  If a goto inf_leave occurs in the middle of decompression
+   and there is no window currently, goto inf_leave will create one and copy
+   output to the window for the next call of inflate().
+
+   In this implementation, the flush parameter of inflate() only affects the
+   return code (per zlib.h).  inflate() always writes as much as possible to
+   strm->next_out, given the space available and the provided input--the effect
+   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
+   the allocation of and copying into a sliding window until necessary, which
+   provides the effect documented in zlib.h for Z_FINISH when the entire input
+   stream available.  So the only thing the flush parameter actually does is:
+   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
+   will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+    struct inflate_state FAR *state;
+    unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned in, out;           /* save starting available input and output */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+#ifdef GUNZIP
+    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
+#endif
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0))
+        return Z_STREAM_ERROR;
+
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
+    LOAD();
+    in = have;
+    out = left;
+    ret = Z_OK;
+    for (;;)
+        switch (state->mode) {
+        case HEAD:
+            if (state->wrap == 0) {
+                state->mode = TYPEDO;
+                break;
+            }
+            NEEDBITS(16);
+#ifdef GUNZIP
+            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
+                state->check = crc32(0L, Z_NULL, 0);
+                CRC2(state->check, hold);
+                INITBITS();
+                state->mode = FLAGS;
+                break;
+            }
+            state->flags = 0;           /* expect zlib header */
+            if (state->head != Z_NULL)
+                state->head->done = -1;
+            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
+#else
+            if (
+#endif
+                ((BITS(8) << 8) + (hold >> 8)) % 31) {
+                strm->msg = (char *)"incorrect header check";
+                state->mode = BAD;
+                break;
+            }
+            if (BITS(4) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            DROPBITS(4);
+            len = BITS(4) + 8;
+            if (state->wbits == 0)
+                state->wbits = len;
+            else if (len > state->wbits) {
+                strm->msg = (char *)"invalid window size";
+                state->mode = BAD;
+                break;
+            }
+            state->dmax = 1U << len;
+            Tracev((stderr, "inflate:   zlib header ok\n"));
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = hold & 0x200 ? DICTID : TYPE;
+            INITBITS();
+            break;
+#ifdef GUNZIP
+        case FLAGS:
+            NEEDBITS(16);
+            state->flags = (int)(hold);
+            if ((state->flags & 0xff) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            if (state->flags & 0xe000) {
+                strm->msg = (char *)"unknown header flags set";
+                state->mode = BAD;
+                break;
+            }
+            if (state->head != Z_NULL)
+                state->head->text = (int)((hold >> 8) & 1);
+            if (state->flags & 0x0200) CRC2(state->check, hold);
+            INITBITS();
+            state->mode = TIME;
+        case TIME:
+            NEEDBITS(32);
+            if (state->head != Z_NULL)
+                state->head->time = hold;
+            if (state->flags & 0x0200) CRC4(state->check, hold);
+            INITBITS();
+            state->mode = OS;
+        case OS:
+            NEEDBITS(16);
+            if (state->head != Z_NULL) {
+                state->head->xflags = (int)(hold & 0xff);
+                state->head->os = (int)(hold >> 8);
+            }
+            if (state->flags & 0x0200) CRC2(state->check, hold);
+            INITBITS();
+            state->mode = EXLEN;
+        case EXLEN:
+            if (state->flags & 0x0400) {
+                NEEDBITS(16);
+                state->length = (unsigned)(hold);
+                if (state->head != Z_NULL)
+                    state->head->extra_len = (unsigned)hold;
+                if (state->flags & 0x0200) CRC2(state->check, hold);
+                INITBITS();
+            }
+            else if (state->head != Z_NULL)
+                state->head->extra = Z_NULL;
+            state->mode = EXTRA;
+        case EXTRA:
+            if (state->flags & 0x0400) {
+                copy = state->length;
+                if (copy > have) copy = have;
+                if (copy) {
+                    if (state->head != Z_NULL &&
+                        state->head->extra != Z_NULL) {
+                        len = state->head->extra_len - state->length;
+                        zmemcpy(state->head->extra + len, next,
+                                len + copy > state->head->extra_max ?
+                                state->head->extra_max - len : copy);
+                    }
+                    if (state->flags & 0x0200)
+                        state->check = crc32(state->check, next, copy);
+                    have -= copy;
+                    next += copy;
+                    state->length -= copy;
+                }
+                if (state->length) goto inf_leave;
+            }
+            state->length = 0;
+            state->mode = NAME;
+        case NAME:
+            if (state->flags & 0x0800) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->name != Z_NULL &&
+                            state->length < state->head->name_max)
+                        state->head->name[state->length++] = len;
+                } while (len && copy < have);
+                if (state->flags & 0x0200)
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->name = Z_NULL;
+            state->length = 0;
+            state->mode = COMMENT;
+        case COMMENT:
+            if (state->flags & 0x1000) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->comment != Z_NULL &&
+                            state->length < state->head->comm_max)
+                        state->head->comment[state->length++] = len;
+                } while (len && copy < have);
+                if (state->flags & 0x0200)
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->comment = Z_NULL;
+            state->mode = HCRC;
+        case HCRC:
+            if (state->flags & 0x0200) {
+                NEEDBITS(16);
+                if (hold != (state->check & 0xffff)) {
+                    strm->msg = (char *)"header crc mismatch";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+            }
+            if (state->head != Z_NULL) {
+                state->head->hcrc = (int)((state->flags >> 9) & 1);
+                state->head->done = 1;
+            }
+            strm->adler = state->check = crc32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+            break;
+#endif
+        case DICTID:
+            NEEDBITS(32);
+            strm->adler = state->check = REVERSE(hold);
+            INITBITS();
+            state->mode = DICT;
+        case DICT:
+            if (state->havedict == 0) {
+                RESTORE();
+                return Z_NEED_DICT;
+            }
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+        case TYPE:
+            if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+        case TYPEDO:
+            if (state->last) {
+                BYTEBITS();
+                state->mode = CHECK;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN_;             /* decode codes */
+                if (flush == Z_TREES) {
+                    DROPBITS(2);
+                    goto inf_leave;
+                }
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+        case STORED:
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+            state->mode = COPY_;
+            if (flush == Z_TREES) goto inf_leave;
+        case COPY_:
+            state->mode = COPY;
+        case COPY:
+            copy = state->length;
+            if (copy) {
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                if (copy == 0) goto inf_leave;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+                break;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+        case TABLE:
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+            state->have = 0;
+            state->mode = LENLENS;
+        case LENLENS:
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+            state->have = 0;
+            state->mode = CODELENS;
+        case CODELENS:
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    NEEDBITS(here.bits);
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = state->lens[state->have - 1];
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (code const FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN_;
+            if (flush == Z_TREES) goto inf_leave;
+        case LEN_:
+            state->mode = LEN;
+        case LEN:
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                inflate_fast(strm, out);
+                LOAD();
+                if (state->mode == TYPE)
+                    state->back = -1;
+                break;
+            }
+            state->back = 0;
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            state->length = (unsigned)here.val;
+            if ((int)(here.op) == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                state->mode = LIT;
+                break;
+            }
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->back = -1;
+                state->mode = TYPE;
+                break;
+            }
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = LENEXT;
+        case LENEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+            state->was = state->length;
+            state->mode = DIST;
+        case DIST:
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = DISTEXT;
+        case DISTEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+#ifdef INFLATE_STRICT
+            if (state->offset > state->dmax) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+            state->mode = MATCH;
+        case MATCH:
+            if (left == 0) goto inf_leave;
+            copy = out - left;
+            if (state->offset > copy) {         /* copy from window */
+                copy = state->offset - copy;
+                if (copy > state->whave) {
+                    if (state->sane) {
+                        strm->msg = (char *)"invalid distance too far back";
+                        state->mode = BAD;
+                        break;
+                    }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                    Trace((stderr, "inflate.c too far\n"));
+                    copy -= state->whave;
+                    if (copy > state->length) copy = state->length;
+                    if (copy > left) copy = left;
+                    left -= copy;
+                    state->length -= copy;
+                    do {
+                        *put++ = 0;
+                    } while (--copy);
+                    if (state->length == 0) state->mode = LEN;
+                    break;
+#endif
+                }
+                if (copy > state->wnext) {
+                    copy -= state->wnext;
+                    from = state->window + (state->wsize - copy);
+                }
+                else
+                    from = state->window + (state->wnext - copy);
+                if (copy > state->length) copy = state->length;
+            }
+            else {                              /* copy from output */
+                from = put - state->offset;
+                copy = state->length;
+            }
+            if (copy > left) copy = left;
+            left -= copy;
+            state->length -= copy;
+            do {
+                *put++ = *from++;
+            } while (--copy);
+            if (state->length == 0) state->mode = LEN;
+            break;
+        case LIT:
+            if (left == 0) goto inf_leave;
+            *put++ = (unsigned char)(state->length);
+            left--;
+            state->mode = LEN;
+            break;
+        case CHECK:
+            if (state->wrap) {
+                NEEDBITS(32);
+                out -= left;
+                strm->total_out += out;
+                state->total += out;
+                if (out)
+                    strm->adler = state->check =
+                        UPDATE(state->check, put - out, out);
+                out = left;
+                if ((
+#ifdef GUNZIP
+                     state->flags ? hold :
+#endif
+                     REVERSE(hold)) != state->check) {
+                    strm->msg = (char *)"incorrect data check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   check matches trailer\n"));
+            }
+#ifdef GUNZIP
+            state->mode = LENGTH;
+        case LENGTH:
+            if (state->wrap && state->flags) {
+                NEEDBITS(32);
+                if (hold != (state->total & 0xffffffffUL)) {
+                    strm->msg = (char *)"incorrect length check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   length matches trailer\n"));
+            }
+#endif
+            state->mode = DONE;
+        case DONE:
+            ret = Z_STREAM_END;
+            goto inf_leave;
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+        case MEM:
+            return Z_MEM_ERROR;
+        case SYNC:
+        default:
+            return Z_STREAM_ERROR;
+        }
+
+    /*
+       Return from inflate(), updating the total counts and the check value.
+       If there was no progress during the inflate() call, return a buffer
+       error.  Call updatewindow() to create and/or update the window state.
+       Note: a memory error from inflate() is non-recoverable.
+     */
+  inf_leave:
+    RESTORE();
+    if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
+        if (updatewindow(strm, out)) {
+            state->mode = MEM;
+            return Z_MEM_ERROR;
+        }
+    in -= strm->avail_in;
+    out -= strm->avail_out;
+    strm->total_in += in;
+    strm->total_out += out;
+    state->total += out;
+    if (state->wrap && out)
+        strm->adler = state->check =
+            UPDATE(state->check, strm->next_out - out, out);
+    strm->data_type = state->bits + (state->last ? 64 : 0) +
+                      (state->mode == TYPE ? 128 : 0) +
+                      (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+        ret = Z_BUF_ERROR;
+    return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->window != Z_NULL) ZFREE(strm, state->window);
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+    struct inflate_state FAR *state;
+    unsigned long id;
+
+    /* check state */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->wrap != 0 && state->mode != DICT)
+        return Z_STREAM_ERROR;
+
+    /* check for correct dictionary id */
+    if (state->mode == DICT) {
+        id = adler32(0L, Z_NULL, 0);
+        id = adler32(id, dictionary, dictLength);
+        if (id != state->check)
+            return Z_DATA_ERROR;
+    }
+
+    /* copy dictionary to window */
+    if (updatewindow(strm, strm->avail_out)) {
+        state->mode = MEM;
+        return Z_MEM_ERROR;
+    }
+    if (dictLength > state->wsize) {
+        zmemcpy(state->window, dictionary + dictLength - state->wsize,
+                state->wsize);
+        state->whave = state->wsize;
+    }
+    else {
+        zmemcpy(state->window + state->wsize - dictLength, dictionary,
+                dictLength);
+        state->whave = dictLength;
+    }
+    state->havedict = 1;
+    Tracev((stderr, "inflate:   dictionary set\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+    /* save header structure */
+    state->head = head;
+    head->done = 0;
+    return Z_OK;
+}
+
+/*
+   Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff.  Return when found
+   or when out of input.  When called, *have is the number of pattern bytes
+   found in order so far, in 0..3.  On return *have is updated to the new
+   state.  If on return *have equals four, then the pattern was found and the
+   return value is how many bytes were read including the last byte of the
+   pattern.  If *have is less than four, then the pattern has not been found
+   yet and the return value is len.  In the latter case, syncsearch() can be
+   called again with more data and the *have state.  *have is initialized to
+   zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+unsigned char FAR *buf;
+unsigned len;
+{
+    unsigned got;
+    unsigned next;
+
+    got = *have;
+    next = 0;
+    while (next < len && got < 4) {
+        if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+            got++;
+        else if (buf[next])
+            got = 0;
+        else
+            got = 4 - got;
+        next++;
+    }
+    *have = got;
+    return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+    unsigned len;               /* number of bytes to look at or looked at */
+    unsigned long in, out;      /* temporary to save total_in and total_out */
+    unsigned char buf[4];       /* to restore bit buffer to byte string */
+    struct inflate_state FAR *state;
+
+    /* check parameters */
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+    /* if first time, start search in bit buffer */
+    if (state->mode != SYNC) {
+        state->mode = SYNC;
+        state->hold <<= state->bits & 7;
+        state->bits -= state->bits & 7;
+        len = 0;
+        while (state->bits >= 8) {
+            buf[len++] = (unsigned char)(state->hold);
+            state->hold >>= 8;
+            state->bits -= 8;
+        }
+        state->have = 0;
+        syncsearch(&(state->have), buf, len);
+    }
+
+    /* search available input */
+    len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+    strm->avail_in -= len;
+    strm->next_in += len;
+    strm->total_in += len;
+
+    /* return no joy or set up to restart inflate() on a new block */
+    if (state->have != 4) return Z_DATA_ERROR;
+    in = strm->total_in;  out = strm->total_out;
+    inflateReset(strm);
+    strm->total_in = in;  strm->total_out = out;
+    state->mode = TYPE;
+    return Z_OK;
+}
+
+/*
+   Returns true if inflate is currently at the end of a block generated by
+   Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+   implementation to provide an additional safety check. PPP uses
+   Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+   block. When decompressing, PPP checks that at the end of input packet,
+   inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+    struct inflate_state FAR *state;
+    struct inflate_state FAR *copy;
+    unsigned char FAR *window;
+    unsigned wsize;
+
+    /* check input */
+    if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
+        source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)source->state;
+
+    /* allocate space */
+    copy = (struct inflate_state FAR *)
+           ZALLOC(source, 1, sizeof(struct inflate_state));
+    if (copy == Z_NULL) return Z_MEM_ERROR;
+    window = Z_NULL;
+    if (state->window != Z_NULL) {
+        window = (unsigned char FAR *)
+                 ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+        if (window == Z_NULL) {
+            ZFREE(source, copy);
+            return Z_MEM_ERROR;
+        }
+    }
+
+    /* copy state */
+    zmemcpy(dest, source, sizeof(z_stream));
+    zmemcpy(copy, state, sizeof(struct inflate_state));
+    if (state->lencode >= state->codes &&
+        state->lencode <= state->codes + ENOUGH - 1) {
+        copy->lencode = copy->codes + (state->lencode - state->codes);
+        copy->distcode = copy->codes + (state->distcode - state->codes);
+    }
+    copy->next = copy->codes + (state->next - state->codes);
+    if (window != Z_NULL) {
+        wsize = 1U << state->wbits;
+        zmemcpy(window, state->window, wsize);
+    }
+    copy->window = window;
+    dest->state = (struct internal_state FAR *)copy;
+    return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    state->sane = !subvert;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+    return Z_OK;
+#else
+    state->sane = 1;
+    return Z_DATA_ERROR;
+#endif
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16;
+    state = (struct inflate_state FAR *)strm->state;
+    return ((long)(state->back) << 16) +
+        (state->mode == COPY ? state->length :
+            (state->mode == MATCH ? state->was - state->length : 0));
+}
Index: cpukit/zlib/inflate.h
===================================================================
--- cpukit/zlib/inflate.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/inflate.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,122 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2009 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip decoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+    HEAD,       /* i: waiting for magic header */
+    FLAGS,      /* i: waiting for method and flags (gzip) */
+    TIME,       /* i: waiting for modification time (gzip) */
+    OS,         /* i: waiting for extra flags and operating system (gzip) */
+    EXLEN,      /* i: waiting for extra length (gzip) */
+    EXTRA,      /* i: waiting for extra bytes (gzip) */
+    NAME,       /* i: waiting for end of file name (gzip) */
+    COMMENT,    /* i: waiting for end of comment (gzip) */
+    HCRC,       /* i: waiting for header crc (gzip) */
+    DICTID,     /* i: waiting for dictionary check value */
+    DICT,       /* waiting for inflateSetDictionary() call */
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        COPY_,      /* i/o: same as COPY below, but only first time in */
+        COPY,       /* i/o: waiting for input or output to copy stored block */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+        LENLENS,    /* i: waiting for code length code lengths */
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */
+            LEN_,       /* i: same as LEN below, but only first time in */
+            LEN,        /* i: waiting for length/lit/eob code */
+            LENEXT,     /* i: waiting for length extra bits */
+            DIST,       /* i: waiting for distance code */
+            DISTEXT,    /* i: waiting for distance extra bits */
+            MATCH,      /* o: waiting for output space to copy string */
+            LIT,        /* o: waiting for output space to write literal */
+    CHECK,      /* i: waiting for 32-bit check value */
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD,        /* got a data error -- remain here until reset */
+    MEM,        /* got an inflate() memory error -- remain here until reset */
+    SYNC        /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+    Process header:
+        HEAD -> (gzip) or (zlib) or (raw)
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+                  HCRC -> TYPE
+        (zlib) -> DICTID or TYPE
+        DICTID -> DICT -> TYPE
+        (raw) -> TYPEDO
+    Read deflate blocks:
+            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+            STORED -> COPY_ -> COPY -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN_
+            LEN_ -> LEN
+    Read deflate codes in fixed or dynamic block:
+                LEN -> LENEXT or LIT or TYPE
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+                LIT -> LEN
+    Process trailer:
+        CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls.  Approximately 10K bytes. */
+struct inflate_state {
+    inflate_mode mode;          /* current inflate mode */
+    int last;                   /* true if processing last block */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
+    int havedict;               /* true if dictionary provided */
+    int flags;                  /* gzip header method and flags (0 if zlib) */
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
+    unsigned long check;        /* protected copy of check value */
+    unsigned long total;        /* protected copy of output count */
+    gz_headerp head;            /* where to save gzip header information */
+        /* sliding window */
+    unsigned wbits;             /* log base 2 of requested window size */
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* bit accumulator */
+    unsigned long hold;         /* input bit accumulator */
+    unsigned bits;              /* number of bits in "in" */
+        /* for string and stored block copying */
+    unsigned length;            /* literal or length of data to copy */
+    unsigned offset;            /* distance back to copy string from */
+        /* for table and code decoding */
+    unsigned extra;             /* extra bits needed */
+        /* fixed and dynamic code tables */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+    int sane;                   /* if false, allow invalid distance too far */
+    int back;                   /* bits back of last unprocessed length/lit */
+    unsigned was;               /* initial length of match */
+};
Index: cpukit/zlib/inftrees.c
===================================================================
--- cpukit/zlib/inftrees.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/inftrees.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,330 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+   " inflate 1.2.4 Copyright 1995-2010 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code here;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    int end;                    /* use base and extra for symbol > end */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 64, 195};
+    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577, 0, 0};
+    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+        28, 28, 29, 29, 64, 64};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) {                     /* no symbols to code at all */
+        here.op = (unsigned char)64;    /* invalid code marker */
+        here.bits = (unsigned char)1;
+        here.val = (unsigned short)0;
+        *(*table)++ = here;             /* make a table to force an error */
+        *(*table)++ = here;
+        *bits = 1;
+        return 0;     /* no symbols, but wait for decoding to report error */
+    }
+    for (min = 1; min < max; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftrees.h
+       for more information.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        end = 19;
+        break;
+    case LENS:
+        base = lbase;
+        base -= 257;
+        extra = lext;
+        extra -= 257;
+        end = 256;
+        break;
+    default:            /* DISTS */
+        base = dbase;
+        extra = dext;
+        end = -1;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if ((type == LENS && used >= ENOUGH_LENS) ||
+        (type == DISTS && used >= ENOUGH_DISTS))
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        here.bits = (unsigned char)(len - drop);
+        if ((int)(work[sym]) < end) {
+            here.op = (unsigned char)0;
+            here.val = work[sym];
+        }
+        else if ((int)(work[sym]) > end) {
+            here.op = (unsigned char)(extra[work[sym]]);
+            here.val = base[work[sym]];
+        }
+        else {
+            here.op = (unsigned char)(32 + 64);         /* end of block */
+            here.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        min = fill;                 /* save offset to next table */
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = here;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += min;            /* here min is 1 << curr */
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used >= ENOUGH_LENS) ||
+                (type == DISTS && used >= ENOUGH_DISTS))
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /*
+       Fill in rest of table for incomplete codes.  This loop is similar to the
+       loop above in incrementing huff for table indices.  It is assumed that
+       len is equal to curr + drop, so there is no loop needed to increment
+       through high index bits.  When the current sub-table is filled, the loop
+       drops back to the root table to fill in any remaining entries there.
+     */
+    here.op = (unsigned char)64;                /* invalid code marker */
+    here.bits = (unsigned char)(len - drop);
+    here.val = (unsigned short)0;
+    while (huff != 0) {
+        /* when done with sub-table, drop back to root table */
+        if (drop != 0 && (huff & mask) != low) {
+            drop = 0;
+            len = root;
+            next = *table;
+            here.bits = (unsigned char)len;
+        }
+
+        /* put invalid code marker in table */
+        next[huff >> drop] = here;
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}
Index: cpukit/zlib/inftrees.h
===================================================================
--- cpukit/zlib/inftrees.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/inftrees.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,62 @@
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    0001eeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1444, which is the sum of 852 for literal/length codes and 592 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in inflate.c and infback.c.  If the root table size is
+   changed, then these maximum sizes would be need to be recalculated and
+   updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+extern int inflate_table OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));
Index: cpukit/zlib/trees.c
===================================================================
--- cpukit/zlib/trees.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/trees.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,1243 @@
+/* trees.c -- output deflated data using Huffman coding
+ * Copyright (C) 1995-2009 Jean-loup Gailly
+ * detect_data_type() function provided freely by Cosmin Truta, 2006
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ *  ALGORITHM
+ *
+ *      The "deflation" process uses several Huffman trees. The more
+ *      common source values are represented by shorter bit sequences.
+ *
+ *      Each code tree is stored in a compressed form which is itself
+ * a Huffman encoding of the lengths of all the code strings (in
+ * ascending order by source values).  The actual code strings are
+ * reconstructed from the lengths in the inflate process, as described
+ * in the deflate specification.
+ *
+ *  REFERENCES
+ *
+ *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
+ *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *
+ *      Storer, James A.
+ *          Data Compression:  Methods and Theory, pp. 49-50.
+ *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
+ *
+ *      Sedgewick, R.
+ *          Algorithms, p290.
+ *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
+ */
+
+/* @(#) $Id$ */
+
+/* #define GEN_TREES_H */
+
+#include "deflate.h"
+
+#ifdef DEBUG
+#  include <ctype.h>
+#endif
+
+/* ===========================================================================
+ * Constants
+ */
+
+#define MAX_BL_BITS 7
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+#define END_BLOCK 256
+/* end of block literal code */
+
+#define REP_3_6      16
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+
+#define REPZ_3_10    17
+/* repeat a zero length 3-10 times  (3 bits of repeat count) */
+
+#define REPZ_11_138  18
+/* repeat a zero length 11-138 times  (7 bits of repeat count) */
+
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
+   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+local const uch bl_order[BL_CODES]
+   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+#define Buf_size (8 * 2*sizeof(char))
+/* Number of bits used within bi_buf. (bi_buf might be implemented on
+ * more than 16 bits on some systems.)
+ */
+
+/* ===========================================================================
+ * Local data. These are initialized only once.
+ */
+
+#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
+local ct_data static_ltree[L_CODES+2];
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
+ * below).
+ */
+
+local ct_data static_dtree[D_CODES];
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+uch _dist_code[DIST_CODE_LEN];
+/* Distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+local int base_length[LENGTH_CODES];
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+local int base_dist[D_CODES];
+/* First normalized distance for each code (0 = distance of 1) */
+
+#else
+#  include "trees.h"
+#endif /* GEN_TREES_H */
+
+struct static_tree_desc_s {
+    const ct_data *static_tree;  /* static tree or NULL */
+    const intf *extra_bits;      /* extra bits for each code or NULL */
+    int     extra_base;          /* base index for extra_bits */
+    int     elems;               /* max number of elements in the tree */
+    int     max_length;          /* max bit length for the codes */
+};
+
+local static_tree_desc  static_l_desc =
+{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
+
+local static_tree_desc  static_d_desc =
+{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
+
+local static_tree_desc  static_bl_desc =
+{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
+
+/* ===========================================================================
+ * Local (static) routines in this file.
+ */
+
+local void tr_static_init OF((void));
+local void init_block     OF((deflate_state *s));
+local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
+local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
+local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
+local void build_tree     OF((deflate_state *s, tree_desc *desc));
+local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
+local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
+local int  build_bl_tree  OF((deflate_state *s));
+local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
+                              int blcodes));
+local void compress_block OF((deflate_state *s, ct_data *ltree,
+                              ct_data *dtree));
+local int  detect_data_type OF((deflate_state *s));
+local unsigned bi_reverse OF((unsigned value, int length));
+local void bi_windup      OF((deflate_state *s));
+local void bi_flush       OF((deflate_state *s));
+local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
+                              int header));
+
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
+#ifndef DEBUG
+#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
+   /* Send a code of the given tree. c and tree must not have side effects */
+
+#else /* DEBUG */
+#  define send_code(s, c, tree) \
+     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
+       send_bits(s, tree[c].Code, tree[c].Len); }
+#endif
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+    put_byte(s, (uch)((w) & 0xff)); \
+    put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG
+local void send_bits      OF((deflate_state *s, int value, int length));
+
+local void send_bits(s, value, length)
+    deflate_state *s;
+    int value;  /* value to send */
+    int length; /* number of bits */
+{
+    Tracevv((stderr," l %2d v %4x ", length, value));
+    Assert(length > 0 && length <= 15, "invalid length");
+    s->bits_sent += (ulg)length;
+
+    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+     * unused bits in value.
+     */
+    if (s->bi_valid > (int)Buf_size - length) {
+        s->bi_buf |= (ush)value << s->bi_valid;
+        put_short(s, s->bi_buf);
+        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+        s->bi_valid += length - Buf_size;
+    } else {
+        s->bi_buf |= (ush)value << s->bi_valid;
+        s->bi_valid += length;
+    }
+}
+#else /* !DEBUG */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+  if (s->bi_valid > (int)Buf_size - len) {\
+    int val = value;\
+    s->bi_buf |= (ush)val << s->bi_valid;\
+    put_short(s, s->bi_buf);\
+    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+    s->bi_valid += len - Buf_size;\
+  } else {\
+    s->bi_buf |= (ush)(value) << s->bi_valid;\
+    s->bi_valid += len;\
+  }\
+}
+#endif /* DEBUG */
+
+
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Initialize the various 'constant' tables.
+ */
+local void tr_static_init()
+{
+#if defined(GEN_TREES_H) || !defined(STDC)
+    static int static_init_done = 0;
+    int n;        /* iterates over tree elements */
+    int bits;     /* bit counter */
+    int length;   /* length value */
+    int code;     /* code value */
+    int dist;     /* distance index */
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    if (static_init_done) return;
+
+    /* For some embedded targets, global variables are not initialized: */
+#ifdef NO_INIT_GLOBAL_POINTERS
+    static_l_desc.static_tree = static_ltree;
+    static_l_desc.extra_bits = extra_lbits;
+    static_d_desc.static_tree = static_dtree;
+    static_d_desc.extra_bits = extra_dbits;
+    static_bl_desc.extra_bits = extra_blbits;
+#endif
+
+    /* Initialize the mapping length (0..255) -> length code (0..28) */
+    length = 0;
+    for (code = 0; code < LENGTH_CODES-1; code++) {
+        base_length[code] = length;
+        for (n = 0; n < (1<<extra_lbits[code]); n++) {
+            _length_code[length++] = (uch)code;
+        }
+    }
+    Assert (length == 256, "tr_static_init: length != 256");
+    /* Note that the length 255 (match length 258) can be represented
+     * in two different ways: code 284 + 5 bits or code 285, so we
+     * overwrite length_code[255] to use the best encoding:
+     */
+    _length_code[length-1] = (uch)code;
+
+    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+    dist = 0;
+    for (code = 0 ; code < 16; code++) {
+        base_dist[code] = dist;
+        for (n = 0; n < (1<<extra_dbits[code]); n++) {
+            _dist_code[dist++] = (uch)code;
+        }
+    }
+    Assert (dist == 256, "tr_static_init: dist != 256");
+    dist >>= 7; /* from now on, all distances are divided by 128 */
+    for ( ; code < D_CODES; code++) {
+        base_dist[code] = dist << 7;
+        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+            _dist_code[256 + dist++] = (uch)code;
+        }
+    }
+    Assert (dist == 256, "tr_static_init: 256+dist != 512");
+
+    /* Construct the codes of the static literal tree */
+    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
+    n = 0;
+    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
+    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
+    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
+    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
+    /* Codes 286 and 287 do not exist, but we must include them in the
+     * tree construction to get a canonical Huffman tree (longest code
+     * all ones)
+     */
+    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
+
+    /* The static distance tree is trivial: */
+    for (n = 0; n < D_CODES; n++) {
+        static_dtree[n].Len = 5;
+        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
+    }
+    static_init_done = 1;
+
+#  ifdef GEN_TREES_H
+    gen_trees_header();
+#  endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
+}
+
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+#  ifndef DEBUG
+#    include <stdio.h>
+#  endif
+
+#  define SEPARATOR(i, last, width) \
+      ((i) == (last)? "\n};\n\n" :    \
+       ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+    FILE *header = fopen("trees.h", "w");
+    int i;
+
+    Assert (header != NULL, "Can't open trees.h");
+    fprintf(header,
+            "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+    for (i = 0; i < L_CODES+2; i++) {
+        fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+                static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+    }
+
+    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+        fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+                static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+    }
+
+    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+    for (i = 0; i < DIST_CODE_LEN; i++) {
+        fprintf(header, "%2u%s", _dist_code[i],
+                SEPARATOR(i, DIST_CODE_LEN-1, 20));
+    }
+
+    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+        fprintf(header, "%2u%s", _length_code[i],
+                SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+    }
+
+    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+    for (i = 0; i < LENGTH_CODES; i++) {
+        fprintf(header, "%1u%s", base_length[i],
+                SEPARATOR(i, LENGTH_CODES-1, 20));
+    }
+
+    fprintf(header, "local const int base_dist[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+        fprintf(header, "%5u%s", base_dist[i],
+                SEPARATOR(i, D_CODES-1, 10));
+    }
+
+    fclose(header);
+}
+#endif /* GEN_TREES_H */
+
+/* ===========================================================================
+ * Initialize the tree data structures for a new zlib stream.
+ */
+void _tr_init(s)
+    deflate_state *s;
+{
+    tr_static_init();
+
+    s->l_desc.dyn_tree = s->dyn_ltree;
+    s->l_desc.stat_desc = &static_l_desc;
+
+    s->d_desc.dyn_tree = s->dyn_dtree;
+    s->d_desc.stat_desc = &static_d_desc;
+
+    s->bl_desc.dyn_tree = s->bl_tree;
+    s->bl_desc.stat_desc = &static_bl_desc;
+
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+    s->last_eob_len = 8; /* enough lookahead for inflate */
+#ifdef DEBUG
+    s->compressed_len = 0L;
+    s->bits_sent = 0L;
+#endif
+
+    /* Initialize the first block of the first file: */
+    init_block(s);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+local void init_block(s)
+    deflate_state *s;
+{
+    int n; /* iterates over tree elements */
+
+    /* Initialize the trees. */
+    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
+    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
+    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
+
+    s->dyn_ltree[END_BLOCK].Freq = 1;
+    s->opt_len = s->static_len = 0L;
+    s->last_lit = s->matches = 0;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(s, tree, top) \
+{\
+    top = s->heap[SMALLEST]; \
+    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
+    pqdownheap(s, tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m, depth) \
+   (tree[n].Freq < tree[m].Freq || \
+   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+local void pqdownheap(s, tree, k)
+    deflate_state *s;
+    ct_data *tree;  /* the tree to restore */
+    int k;               /* node to move down */
+{
+    int v = s->heap[k];
+    int j = k << 1;  /* left son of k */
+    while (j <= s->heap_len) {
+        /* Set j to the smallest of the two sons: */
+        if (j < s->heap_len &&
+            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
+            j++;
+        }
+        /* Exit if v is smaller than both sons */
+        if (smaller(tree, v, s->heap[j], s->depth)) break;
+
+        /* Exchange v with the smallest son */
+        s->heap[k] = s->heap[j];  k = j;
+
+        /* And continue down the tree, setting j to the left son of k */
+        j <<= 1;
+    }
+    s->heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ *    above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ *     array bl_count contains the frequencies for each bit length.
+ *     The length opt_len is updated; static_len is also updated if stree is
+ *     not null.
+ */
+local void gen_bitlen(s, desc)
+    deflate_state *s;
+    tree_desc *desc;    /* the tree descriptor */
+{
+    ct_data *tree        = desc->dyn_tree;
+    int max_code         = desc->max_code;
+    const ct_data *stree = desc->stat_desc->static_tree;
+    const intf *extra    = desc->stat_desc->extra_bits;
+    int base             = desc->stat_desc->extra_base;
+    int max_length       = desc->stat_desc->max_length;
+    int h;              /* heap index */
+    int n, m;           /* iterate over the tree elements */
+    int bits;           /* bit length */
+    int xbits;          /* extra bits */
+    ush f;              /* frequency */
+    int overflow = 0;   /* number of elements with bit length too large */
+
+    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
+
+    /* In a first pass, compute the optimal bit lengths (which may
+     * overflow in the case of the bit length tree).
+     */
+    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
+
+    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
+        n = s->heap[h];
+        bits = tree[tree[n].Dad].Len + 1;
+        if (bits > max_length) bits = max_length, overflow++;
+        tree[n].Len = (ush)bits;
+        /* We overwrite tree[n].Dad which is no longer needed */
+
+        if (n > max_code) continue; /* not a leaf node */
+
+        s->bl_count[bits]++;
+        xbits = 0;
+        if (n >= base) xbits = extra[n-base];
+        f = tree[n].Freq;
+        s->opt_len += (ulg)f * (bits + xbits);
+        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+    }
+    if (overflow == 0) return;
+
+    Trace((stderr,"\nbit length overflow\n"));
+    /* This happens for example on obj2 and pic of the Calgary corpus */
+
+    /* Find the first bit length which could increase: */
+    do {
+        bits = max_length-1;
+        while (s->bl_count[bits] == 0) bits--;
+        s->bl_count[bits]--;      /* move one leaf down the tree */
+        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
+        s->bl_count[max_length]--;
+        /* The brother of the overflow item also moves one step up,
+         * but this does not affect bl_count[max_length]
+         */
+        overflow -= 2;
+    } while (overflow > 0);
+
+    /* Now recompute all bit lengths, scanning in increasing frequency.
+     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+     * lengths instead of fixing only the wrong ones. This idea is taken
+     * from 'ar' written by Haruhiko Okumura.)
+     */
+    for (bits = max_length; bits != 0; bits--) {
+        n = s->bl_count[bits];
+        while (n != 0) {
+            m = s->heap[--h];
+            if (m > max_code) continue;
+            if ((unsigned) tree[m].Len != (unsigned) bits) {
+                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+                s->opt_len += ((long)bits - (long)tree[m].Len)
+                              *(long)tree[m].Freq;
+                tree[m].Len = (ush)bits;
+            }
+            n--;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ *     zero code length.
+ */
+local void gen_codes (tree, max_code, bl_count)
+    ct_data *tree;             /* the tree to decorate */
+    int max_code;              /* largest code with non zero frequency */
+    ushf *bl_count;            /* number of codes at each bit length */
+{
+    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+    ush code = 0;              /* running code value */
+    int bits;                  /* bit index */
+    int n;                     /* code index */
+
+    /* The distribution counts are first used to generate the code values
+     * without bit reversal.
+     */
+    for (bits = 1; bits <= MAX_BITS; bits++) {
+        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+    }
+    /* Check that the bit counts in bl_count are consistent. The last code
+     * must be all ones.
+     */
+    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+            "inconsistent bit counts");
+    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+    for (n = 0;  n <= max_code; n++) {
+        int len = tree[n].Len;
+        if (len == 0) continue;
+        /* Now reverse the bits */
+        tree[n].Code = bi_reverse(next_code[len]++, len);
+
+        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
+    }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ *     and corresponding code. The length opt_len is updated; static_len is
+ *     also updated if stree is not null. The field max_code is set.
+ */
+local void build_tree(s, desc)
+    deflate_state *s;
+    tree_desc *desc; /* the tree descriptor */
+{
+    ct_data *tree         = desc->dyn_tree;
+    const ct_data *stree  = desc->stat_desc->static_tree;
+    int elems             = desc->stat_desc->elems;
+    int n, m;          /* iterate over heap elements */
+    int max_code = -1; /* largest code with non zero frequency */
+    int node;          /* new node being created */
+
+    /* Construct the initial heap, with least frequent element in
+     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+     * heap[0] is not used.
+     */
+    s->heap_len = 0, s->heap_max = HEAP_SIZE;
+
+    for (n = 0; n < elems; n++) {
+        if (tree[n].Freq != 0) {
+            s->heap[++(s->heap_len)] = max_code = n;
+            s->depth[n] = 0;
+        } else {
+            tree[n].Len = 0;
+        }
+    }
+
+    /* The pkzip format requires that at least one distance code exists,
+     * and that at least one bit should be sent even if there is only one
+     * possible code. So to avoid special checks later on we force at least
+     * two codes of non zero frequency.
+     */
+    while (s->heap_len < 2) {
+        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
+        tree[node].Freq = 1;
+        s->depth[node] = 0;
+        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
+        /* node is 0 or 1 so it does not have extra bits */
+    }
+    desc->max_code = max_code;
+
+    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+     * establish sub-heaps of increasing lengths:
+     */
+    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
+
+    /* Construct the Huffman tree by repeatedly combining the least two
+     * frequent nodes.
+     */
+    node = elems;              /* next internal node of the tree */
+    do {
+        pqremove(s, tree, n);  /* n = node of least frequency */
+        m = s->heap[SMALLEST]; /* m = node of next least frequency */
+
+        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
+        s->heap[--(s->heap_max)] = m;
+
+        /* Create a new node father of n and m */
+        tree[node].Freq = tree[n].Freq + tree[m].Freq;
+        s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
+                                s->depth[n] : s->depth[m]) + 1);
+        tree[n].Dad = tree[m].Dad = (ush)node;
+#ifdef DUMP_BL_TREE
+        if (tree == s->bl_tree) {
+            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
+                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
+        }
+#endif
+        /* and insert the new node in the heap */
+        s->heap[SMALLEST] = node++;
+        pqdownheap(s, tree, SMALLEST);
+
+    } while (s->heap_len >= 2);
+
+    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
+
+    /* At this point, the fields freq and dad are set. We can now
+     * generate the bit lengths.
+     */
+    gen_bitlen(s, (tree_desc *)desc);
+
+    /* The field len is now set, we can generate the bit codes */
+    gen_codes ((ct_data *)tree, max_code, s->bl_count);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree.
+ */
+local void scan_tree (s, tree, max_code)
+    deflate_state *s;
+    ct_data *tree;   /* the tree to be scanned */
+    int max_code;    /* and its largest code of non zero frequency */
+{
+    int n;                     /* iterates over all tree elements */
+    int prevlen = -1;          /* last emitted length */
+    int curlen;                /* length of current code */
+    int nextlen = tree[0].Len; /* length of next code */
+    int count = 0;             /* repeat count of the current code */
+    int max_count = 7;         /* max repeat count */
+    int min_count = 4;         /* min repeat count */
+
+    if (nextlen == 0) max_count = 138, min_count = 3;
+    tree[max_code+1].Len = (ush)0xffff; /* guard */
+
+    for (n = 0; n <= max_code; n++) {
+        curlen = nextlen; nextlen = tree[n+1].Len;
+        if (++count < max_count && curlen == nextlen) {
+            continue;
+        } else if (count < min_count) {
+            s->bl_tree[curlen].Freq += count;
+        } else if (curlen != 0) {
+            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
+            s->bl_tree[REP_3_6].Freq++;
+        } else if (count <= 10) {
+            s->bl_tree[REPZ_3_10].Freq++;
+        } else {
+            s->bl_tree[REPZ_11_138].Freq++;
+        }
+        count = 0; prevlen = curlen;
+        if (nextlen == 0) {
+            max_count = 138, min_count = 3;
+        } else if (curlen == nextlen) {
+            max_count = 6, min_count = 3;
+        } else {
+            max_count = 7, min_count = 4;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+local void send_tree (s, tree, max_code)
+    deflate_state *s;
+    ct_data *tree; /* the tree to be scanned */
+    int max_code;       /* and its largest code of non zero frequency */
+{
+    int n;                     /* iterates over all tree elements */
+    int prevlen = -1;          /* last emitted length */
+    int curlen;                /* length of current code */
+    int nextlen = tree[0].Len; /* length of next code */
+    int count = 0;             /* repeat count of the current code */
+    int max_count = 7;         /* max repeat count */
+    int min_count = 4;         /* min repeat count */
+
+    /* tree[max_code+1].Len = -1; */  /* guard already set */
+    if (nextlen == 0) max_count = 138, min_count = 3;
+
+    for (n = 0; n <= max_code; n++) {
+        curlen = nextlen; nextlen = tree[n+1].Len;
+        if (++count < max_count && curlen == nextlen) {
+            continue;
+        } else if (count < min_count) {
+            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
+
+        } else if (curlen != 0) {
+            if (curlen != prevlen) {
+                send_code(s, curlen, s->bl_tree); count--;
+            }
+            Assert(count >= 3 && count <= 6, " 3_6?");
+            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
+
+        } else if (count <= 10) {
+            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
+
+        } else {
+            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
+        }
+        count = 0; prevlen = curlen;
+        if (nextlen == 0) {
+            max_count = 138, min_count = 3;
+        } else if (curlen == nextlen) {
+            max_count = 6, min_count = 3;
+        } else {
+            max_count = 7, min_count = 4;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+local int build_bl_tree(s)
+    deflate_state *s;
+{
+    int max_blindex;  /* index of last bit length code of non zero freq */
+
+    /* Determine the bit length frequencies for literal and distance trees */
+    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
+    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
+
+    /* Build the bit length tree: */
+    build_tree(s, (tree_desc *)(&(s->bl_desc)));
+    /* opt_len now includes the length of the tree representations, except
+     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+     */
+
+    /* Determine the number of bit length codes to send. The pkzip format
+     * requires that at least 4 bit length codes be sent. (appnote.txt says
+     * 3 but the actual value used is 4.)
+     */
+    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
+    }
+    /* Update opt_len to include the bit length tree and counts */
+    s->opt_len += 3*(max_blindex+1) + 5+5+4;
+    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
+            s->opt_len, s->static_len));
+
+    return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+local void send_all_trees(s, lcodes, dcodes, blcodes)
+    deflate_state *s;
+    int lcodes, dcodes, blcodes; /* number of codes for each tree */
+{
+    int rank;                    /* index in bl_order */
+
+    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+            "too many codes");
+    Tracev((stderr, "\nbl counts: "));
+    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
+    send_bits(s, dcodes-1,   5);
+    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
+    for (rank = 0; rank < blcodes; rank++) {
+        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
+    }
+    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
+
+    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
+    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
+
+    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
+    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
+}
+
+/* ===========================================================================
+ * Send a stored block
+ */
+void _tr_stored_block(s, buf, stored_len, last)
+    deflate_state *s;
+    charf *buf;       /* input block */
+    ulg stored_len;   /* length of input block */
+    int last;         /* one if this is the last block for a file */
+{
+    send_bits(s, (STORED_BLOCK<<1)+last, 3);    /* send block type */
+#ifdef DEBUG
+    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
+    s->compressed_len += (stored_len + 4) << 3;
+#endif
+    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
+}
+
+/* ===========================================================================
+ * Send one empty static block to give enough lookahead for inflate.
+ * This takes 10 bits, of which 7 may remain in the bit buffer.
+ * The current inflate code requires 9 bits of lookahead. If the
+ * last two codes for the previous block (real code plus EOB) were coded
+ * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
+ * the last real code. In this case we send two empty static blocks instead
+ * of one. (There are no problems if the previous block is stored or fixed.)
+ * To simplify the code, we assume the worst case of last real code encoded
+ * on one bit only.
+ */
+void _tr_align(s)
+    deflate_state *s;
+{
+    send_bits(s, STATIC_TREES<<1, 3);
+    send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
+    bi_flush(s);
+    /* Of the 10 bits for the empty block, we have already sent
+     * (10 - bi_valid) bits. The lookahead for the last real code (before
+     * the EOB of the previous block) was thus at least one plus the length
+     * of the EOB plus what we have just sent of the empty static block.
+     */
+    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
+        send_bits(s, STATIC_TREES<<1, 3);
+        send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+        s->compressed_len += 10L;
+#endif
+        bi_flush(s);
+    }
+    s->last_eob_len = 7;
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file.
+ */
+void _tr_flush_block(s, buf, stored_len, last)
+    deflate_state *s;
+    charf *buf;       /* input block, or NULL if too old */
+    ulg stored_len;   /* length of input block */
+    int last;         /* one if this is the last block for a file */
+{
+    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+    int max_blindex = 0;  /* index of last bit length code of non zero freq */
+
+    /* Build the Huffman trees unless a stored block is forced */
+    if (s->level > 0) {
+
+        /* Check if the file is binary or text */
+        if (s->strm->data_type == Z_UNKNOWN)
+            s->strm->data_type = detect_data_type(s);
+
+        /* Construct the literal and distance trees */
+        build_tree(s, (tree_desc *)(&(s->l_desc)));
+        Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+                s->static_len));
+
+        build_tree(s, (tree_desc *)(&(s->d_desc)));
+        Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+                s->static_len));
+        /* At this point, opt_len and static_len are the total bit lengths of
+         * the compressed block data, excluding the tree representations.
+         */
+
+        /* Build the bit length tree for the above two trees, and get the index
+         * in bl_order of the last bit length code to send.
+         */
+        max_blindex = build_bl_tree(s);
+
+        /* Determine the best encoding. Compute the block lengths in bytes. */
+        opt_lenb = (s->opt_len+3+7)>>3;
+        static_lenb = (s->static_len+3+7)>>3;
+
+        Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+                opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+                s->last_lit));
+
+        if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+    } else {
+        Assert(buf != (char*)0, "lost buf");
+        opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+    }
+
+#ifdef FORCE_STORED
+    if (buf != (char*)0) { /* force stored block */
+#else
+    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
+                       /* 4: two words for the lengths */
+#endif
+        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+         * Otherwise we can't have processed more than WSIZE input bytes since
+         * the last block flush, because compression would have been
+         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+         * transform a block into a stored block.
+         */
+        _tr_stored_block(s, buf, stored_len, last);
+
+#ifdef FORCE_STATIC
+    } else if (static_lenb >= 0) { /* force static trees */
+#else
+    } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
+#endif
+        send_bits(s, (STATIC_TREES<<1)+last, 3);
+        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
+#ifdef DEBUG
+        s->compressed_len += 3 + s->static_len;
+#endif
+    } else {
+        send_bits(s, (DYN_TREES<<1)+last, 3);
+        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
+                       max_blindex+1);
+        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
+#ifdef DEBUG
+        s->compressed_len += 3 + s->opt_len;
+#endif
+    }
+    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+    /* The above check is made mod 2^32, for files larger than 512 MB
+     * and uLong implemented on 32 bits.
+     */
+    init_block(s);
+
+    if (last) {
+        bi_windup(s);
+#ifdef DEBUG
+        s->compressed_len += 7;  /* align on byte boundary */
+#endif
+    }
+    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
+           s->compressed_len-7*last));
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int _tr_tally (s, dist, lc)
+    deflate_state *s;
+    unsigned dist;  /* distance of matched string */
+    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
+{
+    s->d_buf[s->last_lit] = (ush)dist;
+    s->l_buf[s->last_lit++] = (uch)lc;
+    if (dist == 0) {
+        /* lc is the unmatched char */
+        s->dyn_ltree[lc].Freq++;
+    } else {
+        s->matches++;
+        /* Here, lc is the match length - MIN_MATCH */
+        dist--;             /* dist = match distance - 1 */
+        Assert((ush)dist < (ush)MAX_DIST(s) &&
+               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
+
+        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
+        s->dyn_dtree[d_code(dist)].Freq++;
+    }
+
+#ifdef TRUNCATE_BLOCK
+    /* Try to guess if it is profitable to stop the current block here */
+    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
+        /* Compute an upper bound for the compressed length */
+        ulg out_length = (ulg)s->last_lit*8L;
+        ulg in_length = (ulg)((long)s->strstart - s->block_start);
+        int dcode;
+        for (dcode = 0; dcode < D_CODES; dcode++) {
+            out_length += (ulg)s->dyn_dtree[dcode].Freq *
+                (5L+extra_dbits[dcode]);
+        }
+        out_length >>= 3;
+        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
+               s->last_lit, in_length, out_length,
+               100L - out_length*100L/in_length));
+        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
+    }
+#endif
+    return (s->last_lit == s->lit_bufsize-1);
+    /* We avoid equality with lit_bufsize because of wraparound at 64K
+     * on 16 bit machines and because stored blocks are restricted to
+     * 64K-1 bytes.
+     */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+local void compress_block(s, ltree, dtree)
+    deflate_state *s;
+    ct_data *ltree; /* literal tree */
+    ct_data *dtree; /* distance tree */
+{
+    unsigned dist;      /* distance of matched string */
+    int lc;             /* match length or unmatched char (if dist == 0) */
+    unsigned lx = 0;    /* running index in l_buf */
+    unsigned code;      /* the code to send */
+    int extra;          /* number of extra bits to send */
+
+    if (s->last_lit != 0) do {
+        dist = s->d_buf[lx];
+        lc = s->l_buf[lx++];
+        if (dist == 0) {
+            send_code(s, lc, ltree); /* send a literal byte */
+            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+        } else {
+            /* Here, lc is the match length - MIN_MATCH */
+            code = _length_code[lc];
+            send_code(s, code+LITERALS+1, ltree); /* send the length code */
+            extra = extra_lbits[code];
+            if (extra != 0) {
+                lc -= base_length[code];
+                send_bits(s, lc, extra);       /* send the extra length bits */
+            }
+            dist--; /* dist is now the match distance - 1 */
+            code = d_code(dist);
+            Assert (code < D_CODES, "bad d_code");
+
+            send_code(s, code, dtree);       /* send the distance code */
+            extra = extra_dbits[code];
+            if (extra != 0) {
+                dist -= base_dist[code];
+                send_bits(s, dist, extra);   /* send the extra distance bits */
+            }
+        } /* literal or match pair ? */
+
+        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
+        Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
+               "pendingBuf overflow");
+
+    } while (lx < s->last_lit);
+
+    send_code(s, END_BLOCK, ltree);
+    s->last_eob_len = ltree[END_BLOCK].Len;
+}
+
+/* ===========================================================================
+ * Check if the data type is TEXT or BINARY, using the following algorithm:
+ * - TEXT if the two conditions below are satisfied:
+ *    a) There are no non-portable control characters belonging to the
+ *       "black list" (0..6, 14..25, 28..31).
+ *    b) There is at least one printable character belonging to the
+ *       "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
+ * - BINARY otherwise.
+ * - The following partially-portable control characters form a
+ *   "gray list" that is ignored in this detection algorithm:
+ *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
+ * IN assertion: the fields Freq of dyn_ltree are set.
+ */
+local int detect_data_type(s)
+    deflate_state *s;
+{
+    /* black_mask is the bit mask of black-listed bytes
+     * set bits 0..6, 14..25, and 28..31
+     * 0xf3ffc07f = binary 11110011111111111100000001111111
+     */
+    unsigned long black_mask = 0xf3ffc07fUL;
+    int n;
+
+    /* Check for non-textual ("black-listed") bytes. */
+    for (n = 0; n <= 31; n++, black_mask >>= 1)
+        if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
+            return Z_BINARY;
+
+    /* Check for textual ("white-listed") bytes. */
+    if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
+            || s->dyn_ltree[13].Freq != 0)
+        return Z_TEXT;
+    for (n = 32; n < LITERALS; n++)
+        if (s->dyn_ltree[n].Freq != 0)
+            return Z_TEXT;
+
+    /* There are no "black-listed" or "white-listed" bytes:
+     * this stream either is empty or has tolerated ("gray-listed") bytes only.
+     */
+    return Z_BINARY;
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+local unsigned bi_reverse(code, len)
+    unsigned code; /* the value to invert */
+    int len;       /* its bit length */
+{
+    register unsigned res = 0;
+    do {
+        res |= code & 1;
+        code >>= 1, res <<= 1;
+    } while (--len > 0);
+    return res >> 1;
+}
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+local void bi_flush(s)
+    deflate_state *s;
+{
+    if (s->bi_valid == 16) {
+        put_short(s, s->bi_buf);
+        s->bi_buf = 0;
+        s->bi_valid = 0;
+    } else if (s->bi_valid >= 8) {
+        put_byte(s, (Byte)s->bi_buf);
+        s->bi_buf >>= 8;
+        s->bi_valid -= 8;
+    }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+local void bi_windup(s)
+    deflate_state *s;
+{
+    if (s->bi_valid > 8) {
+        put_short(s, s->bi_buf);
+    } else if (s->bi_valid > 0) {
+        put_byte(s, (Byte)s->bi_buf);
+    }
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+#ifdef DEBUG
+    s->bits_sent = (s->bits_sent+7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Copy a stored block, storing first the length and its
+ * one's complement if requested.
+ */
+local void copy_block(s, buf, len, header)
+    deflate_state *s;
+    charf    *buf;    /* the input data */
+    unsigned len;     /* its length */
+    int      header;  /* true if block header must be written */
+{
+    bi_windup(s);        /* align on byte boundary */
+    s->last_eob_len = 8; /* enough lookahead for inflate */
+
+    if (header) {
+        put_short(s, (ush)len);
+        put_short(s, (ush)~len);
+#ifdef DEBUG
+        s->bits_sent += 2*16;
+#endif
+    }
+#ifdef DEBUG
+    s->bits_sent += (ulg)len<<3;
+#endif
+    while (len--) {
+        put_byte(s, *buf++);
+    }
+}
Index: cpukit/zlib/uncompr.c
===================================================================
--- cpukit/zlib/uncompr.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/uncompr.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,59 @@
+/* uncompr.c -- decompress a memory buffer
+ * Copyright (C) 1995-2003, 2010 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+/* ===========================================================================
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+
+    err = inflateInit(&stream);
+    if (err != Z_OK) return err;
+
+    err = inflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        inflateEnd(&stream);
+        if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
+            return Z_DATA_ERROR;
+        return err;
+    }
+    *destLen = stream.total_out;
+
+    err = inflateEnd(&stream);
+    return err;
+}
Index: cpukit/zlib/zconf.h
===================================================================
--- cpukit/zlib/zconf.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/zconf.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,416 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#if 1     /* was set to #if 1 by ./configure */
+
+/* all linked symbols */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define compress              z_compress
+#  define compress2             z_compress2
+#  define compressBound         z_compressBound
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  define gz_error              z_gz_error
+#  define gz_intmax             z_gz_intmax
+#  define gz_strwinerror        z_gz_strwinerror
+#  define gzbuffer              z_gzbuffer
+#  define gzclearerr            z_gzclearerr
+#  define gzclose               z_gzclose
+#  define gzclose_r             z_gzclose_r
+#  define gzclose_w             z_gzclose_w
+#  define gzdirect              z_gzdirect
+#  define gzdopen               z_gzdopen
+#  define gzeof                 z_gzeof
+#  define gzerror               z_gzerror
+#  define gzflush               z_gzflush
+#  define gzgetc                z_gzgetc
+#  define gzgets                z_gzgets
+#  define gzoffset              z_gzoffset
+#  define gzoffset64            z_gzoffset64
+#  define gzopen                z_gzopen
+#  define gzopen64              z_gzopen64
+#  define gzprintf              z_gzprintf
+#  define gzputc                z_gzputc
+#  define gzputs                z_gzputs
+#  define gzread                z_gzread
+#  define gzrewind              z_gzrewind
+#  define gzseek                z_gzseek
+#  define gzseek64              z_gzseek64
+#  define gzsetparams           z_gzsetparams
+#  define gztell                z_gztell
+#  define gztell64              z_gztell64
+#  define gzungetc              z_gzungetc
+#  define gzwrite               z_gzwrite
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  define uncompress            z_uncompress
+#  define zError                z_zError
+#  define zcalloc               z_zcalloc
+#  define zcfree                z_zcfree
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  define gzFile                z_gzFile
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifdef HAVE_VISIBILITY_PRAGMA
+#  define ZEXTERN __attribute__((visibility ("default"))) extern
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if 1    /* was set to #if 1 by ./configure */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef Z_HAVE_UNISTD_H
+#  include <sys/types.h>    /* for off_t */
+#  include <unistd.h>       /* for SEEK_* and off_t */
+#  ifdef VMS
+#    include <unixio.h>     /* for off_t */
+#  endif
+#  ifndef z_off_t
+#    define z_off_t off_t
+#  endif
+#endif
+
+#ifdef _LARGEFILE64_SOURCE
+#  include <sys/types.h>
+#endif
+
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if defined(__OS400__)
+#  define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+#  define NO_vsnprintf
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
Index: cpukit/zlib/zlib.3
===================================================================
--- cpukit/zlib/zlib.3	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/zlib.3	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,151 @@
+.TH ZLIB 3 "14 March 2010"
+.SH NAME
+zlib \- compression/decompression library
+.SH SYNOPSIS
+[see
+.I zlib.h
+for full description]
+.SH DESCRIPTION
+The
+.I zlib
+library is a general purpose data compression library.
+The code is thread safe, assuming that the standard library functions
+used are thread safe, such as memory allocation routines.
+It provides in-memory compression and decompression functions,
+including integrity checks of the uncompressed data.
+This version of the library supports only one compression method (deflation)
+but other algorithms may be added later
+with the same stream interface.
+.LP
+Compression can be done in a single step if the buffers are large enough
+or can be done by repeated calls of the compression function.
+In the latter case,
+the application must provide more input and/or consume the output
+(providing more output space) before each call.
+.LP
+The library also supports reading and writing files in
+.IR gzip (1)
+(.gz) format
+with an interface similar to that of stdio.
+.LP
+The library does not install any signal handler.
+The decoder checks the consistency of the compressed data,
+so the library should never crash even in the case of corrupted input.
+.LP
+All functions of the compression library are documented in the file
+.IR zlib.h .
+The distribution source includes examples of use of the library
+in the files
+.I example.c
+and
+.IR minigzip.c,
+as well as other examples in the
+.IR examples/
+directory.
+.LP
+Changes to this version are documented in the file
+.I ChangeLog
+that accompanies the source.
+.LP
+.I zlib
+is available in Java using the java.util.zip package:
+.IP
+http://java.sun.com/developer/technicalArticles/Programming/compression/
+.LP
+A Perl interface to
+.IR zlib ,
+written by Paul Marquess (pmqs@cpan.org),
+is available at CPAN (Comprehensive Perl Archive Network) sites,
+including:
+.IP
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/
+.LP
+A Python interface to
+.IR zlib ,
+written by A.M. Kuchling (amk@magnet.com),
+is available in Python 1.5 and later versions:
+.IP
+http://www.python.org/doc/lib/module-zlib.html
+.LP
+.I zlib
+is built into
+.IR tcl:
+.IP
+http://wiki.tcl.tk/4610
+.LP
+An experimental package to read and write files in .zip format,
+written on top of
+.I zlib
+by Gilles Vollant (info@winimage.com),
+is available at:
+.IP
+http://www.winimage.com/zLibDll/minizip.html
+and also in the
+.I contrib/minizip
+directory of the main
+.I zlib
+source distribution.
+.SH "SEE ALSO"
+The
+.I zlib
+web site can be found at:
+.IP
+http://zlib.net/
+.LP
+The data format used by the zlib library is described by RFC
+(Request for Comments) 1950 to 1952 in the files:
+.IP
+http://www.ietf.org/rfc/rfc1950.txt (for the zlib header and trailer format)
+.br
+http://www.ietf.org/rfc/rfc1951.txt (for the deflate compressed data format)
+.br
+http://www.ietf.org/rfc/rfc1952.txt (for the gzip header and trailer format)
+.LP
+Mark Nelson wrote an article about
+.I zlib
+for the Jan. 1997 issue of  Dr. Dobb's Journal;
+a copy of the article is available at:
+.IP
+http://marknelson.us/1997/01/01/zlib-engine/
+.SH "REPORTING PROBLEMS"
+Before reporting a problem,
+please check the
+.I zlib
+web site to verify that you have the latest version of
+.IR zlib ;
+otherwise,
+obtain the latest version and see if the problem still exists.
+Please read the
+.I zlib
+FAQ at:
+.IP
+http://zlib.net/zlib_faq.html
+.LP
+before asking for help.
+Send questions and/or comments to zlib@gzip.org,
+or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
+.SH AUTHORS
+Version 1.2.4
+Copyright (C) 1995-2010 Jean-loup Gailly (jloup@gzip.org)
+and Mark Adler (madler@alumni.caltech.edu).
+.LP
+This software is provided "as-is,"
+without any express or implied warranty.
+In no event will the authors be held liable for any damages
+arising from the use of this software.
+See the distribution directory with respect to requirements
+governing redistribution.
+The deflate format used by
+.I zlib
+was defined by Phil Katz.
+The deflate and
+.I zlib
+specifications were written by L. Peter Deutsch.
+Thanks to all the people who reported problems and suggested various
+improvements in
+.IR zlib ;
+who are too numerous to cite here.
+.LP
+UNIX manual page by R. P. C. Rodgers,
+U.S. National Library of Medicine (rodgers@nlm.nih.gov).
+.\" end of man page
Index: cpukit/zlib/zlib.h
===================================================================
--- cpukit/zlib/zlib.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/zlib.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,1610 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.2.4, Mar 14th, 2010
+
+  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.4"
+#define ZLIB_VERNUM 0x1240
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 4
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
+
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+    The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
+    The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+    This library can optionally read and write gzip streams in memory as well.
+
+    The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: binary or text */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
+   opaque value.
+
+     zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
+
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use in the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+#define Z_BLOCK         5
+#define Z_TREES         6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field (though see inflate()) */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows.  deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).  Some
+    output may be provided even if flush is not set.
+
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending.
+
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumulate before producing output, in order to
+  maximize compression.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
+
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed code
+  block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
+  compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error.  After
+  deflate has returned Z_STREAM_END, the only possible operations on the stream
+  are deflateReset or deflateEnd.
+
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step.  In this case, avail_out must be at least the
+  value returned by deflateBound (see below).  If deflate does not return
+  Z_STREAM_END, then it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT).  In doubt, the data is considered
+  binary.  This field is only for information purposes and does not affect the
+  compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not
+  fatal, and deflate() can be called again with more input and more output
+  space to continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression.  The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller.  If next_in is not Z_NULL and avail_in is large enough (the
+   exact value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit() does not process any header information -- that is deferred
+   until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+  The detailed semantics are as follows.  inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing will
+    resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
+
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  Also to assist in this, on return inflate() will set strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all the uncompressed data.  (The size
+  of the uncompressed data may have been saved by the compressor for this
+  purpose.) The next operation on this stream must be inflateEnd to deallocate
+  the decompression state.  The use of Z_FINISH is never required, but can be
+  used to inform inflate that a faster approach may be used for the single
+  inflate() call.
+
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call.  So the only effect of the flush parameter in this implementation
+  is on the return value of inflate(), as noted below, or when it returns early
+  because Z_BLOCK or Z_TREES is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the adler32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the adler32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below.  At the end of the stream, inflate() checks that its computed adler32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained, so applications that need that information should
+  instead use raw inflate, see inflateInit2() below, or inflateBack() and
+  perform their own processing of the gzip header and trailer.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
+  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+  output buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is desired.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent.  In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options.  The
+   fields next_in, zalloc, zfree and opaque must be initialized before by the
+   caller.
+
+     The method parameter is the compression method.  It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
+   deflateInit is used instead.
+
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute an adler32 check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to 255 (unknown).  If a
+   gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm.  Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
+
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output.  This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any call
+   of deflate.  The compressor and decompressor must use exactly the same
+   dictionary (see inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary.  Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
+
+     Upon return of this function, strm->adler is set to the adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor.  (The adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.) If a raw deflate was requested, then the
+   adler32 value is not computed and strm->adler is not set.
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort).  deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter.  The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.  The
+   stream will keep the same compression level and any other attributes that
+   may have been set by deflateInit2.
+
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+                                      int level,
+                                      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression level is changed, the input available so far is
+   compressed with the old level (and may be flushed); the new level will take
+   effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to be
+   compressed and flushed.  In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+   strm->avail_out was zero.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
+/*
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().
+*/
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+     If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter.  The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used.  If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream.  This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values.  If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an adler32 or a crc32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is.  Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   crc32 instead of an adler32.
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
+   can be determined from the adler32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called
+   immediately after inflateInit2() or inflateReset() and before any call of
+   inflate() to set the dictionary.  The application must insure that the
+   dictionary that was used for compression is provided.
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect adler32 value).  inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+     Skips invalid compressed data until a full flush point (see above the
+   description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+   if no more input was provided, Z_DATA_ERROR if no flush point has been
+   found, or Z_STREAM_ERROR if the stream structure was inconsistent.  In the
+   success case, the application may save the current current value of total_in
+   which indicates where valid compressed data was found.  In the error case,
+   the application may repeatedly call inflateSync, providing more input each
+   time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
+
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.
+
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above or -1 << 16 if the provided
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
+
+     The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+     If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is more efficient than inflate() for
+   file i/o applications in that it avoids copying between the output and the
+   sliding window by simply making the window itself the output buffer.  This
+   function trusts the application to not change the output buffer passed by
+   the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the normal
+   behavior of inflate(), which expects either a zlib or gzip header and
+   trailer around the deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero--buf is ignored in that
+   case--and inflateBack() will return a buffer error.  inflateBack() will call
+   out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].  out()
+   should return zero on success, or non-zero on failure.  If out() returns
+   non-zero, inflateBack() will return with an error.  Neither in() nor out()
+   are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.) Note that inflateBack()
+   cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed buffer.
+
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer.  The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer.  Upon entry, destLen is the total size of the
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed buffer.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
+*/
+
+
+                        /* gzip file access functions */
+
+/*
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef voidp gzFile;       /* opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
+   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+   for fixed code compression as in "wb9F".  (See the description of
+   deflateInit2 for more information about the strategy parameter.) Also "a"
+   can be used instead of "w" to request that the gzip stream that will be
+   written be appended to the file.  "+" will result in an error, since reading
+   and writing to the same gzip file is not supported.
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.
+
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
+   are obtained from calls like open, dup, creat, pipe or fileno (if the file
+   has been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions.  The
+   default buffer size is 8192 bytes.  This function must be called after
+   gzopen() or gzdopen(), and before any other calls that read or write the
+   file.  The buffer memory allocation is always deferred to the first read or
+   write.  Two buffers are allocated, either both of the specified size when
+   writing, or one of the specified size and the other twice that size when
+   reading.  A larger buffer size of, for example, 64K or 128K bytes will
+   noticeably increase the speed of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy.  See the description
+   of deflateInit2 for the meaning of these parameters.
+
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+     Reads the given number of uncompressed bytes from the compressed file.  If
+   the input file was not in gzip format, gzread copies the given number of
+   bytes into the buffer.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream, or failing that, reading the rest
+   of the input file directly without decompression.  The entire input file
+   will be read if gzread is called until it returns less than the requested
+   len.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+                                voidpc buf, unsigned len));
+/*
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of uncompressed bytes written or 0 in case of
+   error.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the arguments to the compressed file under
+   control of the format string, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or 0 in case of error.  The number of
+   uncompressed bytes written is limited to 8191, or one less than the buffer
+   size given to gzbuffer().  The caller should assure that this limit is not
+   exceeded.  If it is exceeded, then gzprintf() will return an error (0) with
+   nothing written.  In this case, there may also be a buffer overflow with
+   unpredictable consequences, which is possible only if zlib was compiled with
+   the insecure functions sprintf() or vsprintf() because the secure snprintf()
+   or vsnprintf() functions were not available.  This can be determined using
+   zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+     Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+
+     gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+     Reads bytes from the compressed file until len-1 characters are read, or a
+   newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  If any characters are read or if len == 1, the
+   string is terminated with a null character.  If no characters are read due
+   to an end-of-file or len < 1, then the buffer is left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+     Writes c, converted to an unsigned char, into the compressed file.  gzputc
+   returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+     Reads one byte from the compressed file.  gzgetc returns this byte or -1
+   in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+     Push one character back onto the stream to be read as the first character
+   on the next read.  At least one character of push-back is allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+     Flushes all pending output into the compressed file.  The parameter flush
+   is as in the deflate() function.  The return value is the zlib error number
+   (see function gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatented gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Sets the starting position for the next gzread or gzwrite on the given
+   compressed file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow.  If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+     gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+
+     Returns the starting position for the next gzread or gzwrite on the given
+   compressed file.  This position represents a number of bytes in the
+   uncompressed data stream, and is zero when starting, even if appending or
+   reading a gzip stream from the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Returns the current offset in the file being read or written.  This offset
+   includes the count of bytes that precede the gzip stream, for example when
+   appending or when using gzdopen() for reading.  When reading, the offset
+   does not include as yet unused buffered input.  This information can be used
+   for a progress indicator.  On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns true (1) if the end-of-file indicator has been set while reading,
+   false (0) otherwise.  Note that the end-of-file indicator is set only if the
+   read tried to go past the end of the input, but came up short.  Therefore,
+   just like feof(), gzeof() may return false even if there is no more data to
+   read, in the event that the last read request was for the exact number of
+   bytes remaining in the input file.  This will happen if the input file size
+   is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+     Returns true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.  This state can change from
+   false to true while reading the input file if the end of a gzip stream is
+   reached, but is followed by data that is not another gzip stream.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flushes all pending output if necessary, closes the compressed file and
+   deallocates the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Returns the error message for the last error which occurred on the given
+   compressed file.  errnum is set to zlib error number.  If an error occurred
+   in the file system and not in the compression library, errnum is set to
+   Z_ERRNO and the application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clears the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the compression
+   library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum.  If buf is Z_NULL, this function returns the
+   required initial value for the checksum.
+
+     An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster.
+
+   Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+*/
+
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32.  If buf is Z_NULL, this function returns the required
+   initial value for the for the crc.  Pre- and post-conditioning (one's
+   complement) is performed within this function so it shouldn't be done by the
+   application.
+
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#define deflateInit(strm, level) \
+        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+        inflateBackInit_((strm), (windowBits), (window), \
+                                            ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef _LARGEFILE64_SOURCE
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN off64_t ZEXPORT gzseek64 OF((gzFile, off64_t, int));
+   ZEXTERN off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS == 64
+#  define gzopen gzopen64
+#  define gzseek gzseek64
+#  define gztell gztell64
+#  define gzoffset gzoffset64
+#  define adler32_combine adler32_combine64
+#  define crc32_combine crc32_combine64
+#  ifndef _LARGEFILE64_SOURCE
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN off_t ZEXPORT gzseek64 OF((gzFile, off_t, int));
+     ZEXTERN off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#  ifndef _LARGEFILE64_SOURCE
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+#  endif
+#endif
+
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
+    struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+ZEXTERN const char   * ZEXPORT zError           OF((int));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
Index: cpukit/zlib/zutil.c
===================================================================
--- cpukit/zlib/zutil.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/zutil.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,318 @@
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+#ifndef NO_DUMMY_DECL
+struct internal_state      {int dummy;}; /* for buggy compilers */
+#endif
+
+const char * const z_errmsg[10] = {
+"need dictionary",     /* Z_NEED_DICT       2  */
+"stream end",          /* Z_STREAM_END      1  */
+"",                    /* Z_OK              0  */
+"file error",          /* Z_ERRNO         (-1) */
+"stream error",        /* Z_STREAM_ERROR  (-2) */
+"data error",          /* Z_DATA_ERROR    (-3) */
+"insufficient memory", /* Z_MEM_ERROR     (-4) */
+"buffer error",        /* Z_BUF_ERROR     (-5) */
+"incompatible version",/* Z_VERSION_ERROR (-6) */
+""};
+
+
+const char * ZEXPORT zlibVersion()
+{
+    return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+    uLong flags;
+
+    flags = 0;
+    switch ((int)(sizeof(uInt))) {
+    case 2:     break;
+    case 4:     flags += 1;     break;
+    case 8:     flags += 2;     break;
+    default:    flags += 3;
+    }
+    switch ((int)(sizeof(uLong))) {
+    case 2:     break;
+    case 4:     flags += 1 << 2;        break;
+    case 8:     flags += 2 << 2;        break;
+    default:    flags += 3 << 2;
+    }
+    switch ((int)(sizeof(voidpf))) {
+    case 2:     break;
+    case 4:     flags += 1 << 4;        break;
+    case 8:     flags += 2 << 4;        break;
+    default:    flags += 3 << 4;
+    }
+    switch ((int)(sizeof(z_off_t))) {
+    case 2:     break;
+    case 4:     flags += 1 << 6;        break;
+    case 8:     flags += 2 << 6;        break;
+    default:    flags += 3 << 6;
+    }
+#ifdef DEBUG
+    flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+    flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+    flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+    flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+    flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+    flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+    flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+    flags += 1L << 20;
+#endif
+#ifdef FASTEST
+    flags += 1L << 21;
+#endif
+#ifdef STDC
+#  ifdef NO_vsnprintf
+        flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+        flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+        flags += 1L << 26;
+#    endif
+#  endif
+#else
+        flags += 1L << 24;
+#  ifdef NO_snprintf
+        flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+        flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+        flags += 1L << 26;
+#    endif
+#  endif
+#endif
+    return flags;
+}
+
+#ifdef DEBUG
+
+#  ifndef verbose
+#    define verbose 0
+#  endif
+int z_verbose = verbose;
+
+void z_error (m)
+    char *m;
+{
+    fprintf(stderr, "%s\n", m);
+    exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+    int err;
+{
+    return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+    /* The Microsoft C Run-Time Library for Windows CE doesn't have
+     * errno.  We define it as a global variable to simplify porting.
+     * Its value is always 0 and should not be used.
+     */
+    int errno = 0;
+#endif
+
+#ifndef HAVE_MEMCPY
+
+void zmemcpy(dest, source, len)
+    Bytef* dest;
+    const Bytef* source;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = *source++; /* ??? to be unrolled */
+    } while (--len != 0);
+}
+
+int zmemcmp(s1, s2, len)
+    const Bytef* s1;
+    const Bytef* s2;
+    uInt  len;
+{
+    uInt j;
+
+    for (j = 0; j < len; j++) {
+        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+    }
+    return 0;
+}
+
+void zmemzero(dest, len)
+    Bytef* dest;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = 0;  /* ??? to be unrolled */
+    } while (--len != 0);
+}
+#endif
+
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+    voidpf org_ptr;
+    voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    voidpf buf = opaque; /* just to make some compilers happy */
+    ulg bsize = (ulg)items*size;
+
+    /* If we allocate less than 65520 bytes, we assume that farmalloc
+     * will return a usable pointer which doesn't have to be normalized.
+     */
+    if (bsize < 65520L) {
+        buf = farmalloc(bsize);
+        if (*(ush*)&buf != 0) return buf;
+    } else {
+        buf = farmalloc(bsize + 16L);
+    }
+    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+    table[next_ptr].org_ptr = buf;
+
+    /* Normalize the pointer to seg:0 */
+    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+    *(ush*)&buf = 0;
+    table[next_ptr++].new_ptr = buf;
+    return buf;
+}
+
+void  zcfree (voidpf opaque, voidpf ptr)
+{
+    int n;
+    if (*(ush*)&ptr != 0) { /* object < 64K */
+        farfree(ptr);
+        return;
+    }
+    /* Find the original pointer */
+    for (n = 0; n < next_ptr; n++) {
+        if (ptr != table[n].new_ptr) continue;
+
+        farfree(table[n].org_ptr);
+        while (++n < next_ptr) {
+            table[n-1] = table[n];
+        }
+        next_ptr--;
+        return;
+    }
+    ptr = opaque; /* just to make some compilers happy */
+    Assert(0, "zcfree: ptr not found");
+}
+
+#endif /* __TURBOC__ */
+
+
+#ifdef M_I86
+/* Microsoft C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+#  define _halloc  halloc
+#  define _hfree   hfree
+#endif
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    return _halloc((long)items, size);
+}
+
+void  zcfree (voidpf opaque, voidpf ptr)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    _hfree(ptr);
+}
+
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp  malloc OF((uInt size));
+extern voidp  calloc OF((uInt items, uInt size));
+extern void   free   OF((voidpf ptr));
+#endif
+
+voidpf zcalloc (opaque, items, size)
+    voidpf opaque;
+    uInt items;
+    uInt size;
+{
+    if (opaque) items += size - size; /* make compiler happy */
+    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+                              (voidpf)calloc(items, size);
+}
+
+void  zcfree (opaque, ptr)
+    voidpf opaque;
+    voidpf ptr;
+{
+    free(ptr);
+    if (opaque) return; /* make compiler happy */
+}
+
+#endif /* MY_ZCALLOC */
Index: cpukit/zlib/zutil.h
===================================================================
--- cpukit/zlib/zutil.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ cpukit/zlib/zutil.h	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,287 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#define ZLIB_INTERNAL
+#include "zlib.h"
+
+#ifdef STDC
+#  if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+#    include <stddef.h>
+#  endif
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+
+#if defined(UNDER_CE) && defined(NO_ERRNO_H)
+#  define zseterrno(ERR) SetLastError((DWORD)(ERR))
+#  define zerrno() ((int)GetLastError())
+#else
+#  ifdef NO_ERRNO_H
+     extern int errno;
+#  else
+#    include <errno.h>
+#  endif
+#  define zseterrno(ERR) do { errno = (ERR); } while (0)
+#  define zerrno() errno
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char  uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long  ulg;
+
+extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+  return (strm->msg = (char*)ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+        /* common constants */
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
+#  define OS_CODE  0x00
+#  if defined(__TURBOC__) || defined(__BORLANDC__)
+#    if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+       /* Allow compilation with ANSI keywords only enabled */
+       void _Cdecl farfree( void *block );
+       void *_Cdecl farmalloc( unsigned long nbytes );
+#    else
+#      include <alloc.h>
+#    endif
+#  else /* MSC or DJGPP */
+#    include <malloc.h>
+#  endif
+#endif
+
+#ifdef AMIGA
+#  define OS_CODE  0x01
+#endif
+
+#if defined(VAXC) || defined(VMS)
+#  define OS_CODE  0x02
+#  define F_OPEN(name, mode) \
+     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#if defined(ATARI) || defined(atarist)
+#  define OS_CODE  0x05
+#endif
+
+#ifdef OS2
+#  define OS_CODE  0x06
+#  ifdef M_I86
+#    include <malloc.h>
+#  endif
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+#  define OS_CODE  0x07
+#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#    include <unix.h> /* for fdopen */
+#  else
+#    ifndef fdopen
+#      define fdopen(fd,mode) NULL /* No fdopen() */
+#    endif
+#  endif
+#endif
+
+#ifdef TOPS20
+#  define OS_CODE  0x0a
+#endif
+
+#ifdef WIN32
+#  ifndef __CYGWIN__  /* Cygwin is Unix, not Win32 */
+#    define OS_CODE  0x0b
+#  endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+#  define OS_CODE  0x0f
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+#  define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+#  if defined(_WIN32_WCE)
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#    ifndef _PTRDIFF_T_DEFINED
+       typedef int ptrdiff_t;
+#      define _PTRDIFF_T_DEFINED
+#    endif
+#  else
+#    define fdopen(fd,type)  _fdopen(fd,type)
+#  endif
+#endif
+
+#if defined(__BORLANDC__)
+  #pragma warn -8004
+  #pragma warn -8008
+  #pragma warn -8066
+#endif
+
+#ifdef _LARGEFILE64_SOURCE
+#  define z_off64_t off64_t
+#else
+#  define z_off64_t z_off_t
+#endif
+
+        /* common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03  /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+#  define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+#ifdef _LARGEFILE64_SOURCE
+#  define F_OPEN64(name, mode) fopen64((name), (mode))
+#else
+#  define F_OPEN64(name, mode) fopen((name), (mode))
+#endif
+
+         /* functions */
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+#ifndef HAVE_VSNPRINTF
+#  ifdef MSDOS
+     /* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+        but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef __TURBOC__
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+     /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
+#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+#         define vsnprintf _vsnprintf
+#      endif
+#    endif
+#  endif
+#  ifdef __SASC
+#    define NO_vsnprintf
+#  endif
+#endif
+#ifdef VMS
+#  define NO_vsnprintf
+#endif
+
+#if defined(pyr)
+#  define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+  * You may have to use the same strategy for Borland C (untested).
+  * The __SC__ check is for Symantec.
+  */
+#  define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+#  define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+#    define zmemcpy _fmemcpy
+#    define zmemcmp _fmemcmp
+#    define zmemzero(dest, len) _fmemset(dest, 0, len)
+#  else
+#    define zmemcpy memcpy
+#    define zmemcmp memcmp
+#    define zmemzero(dest, len) memset(dest, 0, len)
+#  endif
+#else
+   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
+   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
+   extern void zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  include <stdio.h>
+   extern int z_verbose;
+   extern void z_error    OF((char *m));
+#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
+#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
+#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+
+voidpf zcalloc OF((voidpf opaque, uInt items, uInt size));
+void   zcfree  OF((voidpf opaque, voidpf ptr));
+
+#define ZALLOC(strm, items, size) \
+           (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+#endif /* ZUTIL_H */
Index: testsuites/libtests/mathf/.cvsignore
===================================================================
--- testsuites/libtests/mathf/.cvsignore	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ testsuites/libtests/mathf/.cvsignore	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,2 @@
+Makefile
+Makefile.in
Index: testsuites/libtests/mathf/Makefile.am
===================================================================
--- testsuites/libtests/mathf/Makefile.am	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ testsuites/libtests/mathf/Makefile.am	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,30 @@
+##
+##  $Id$
+##
+
+rtems_tests_PROGRAMS = mathf
+mathf_SOURCES = init.c domathf.c
+EXTRA_DIST = $(srcdir)/../math/domath.in
+
+$(srcdir)/domathf.c: $(srcdir)/../math/domath.in
+	sed -e 's,[@]FTYPE[@],float,' \
+	-e 's,[@]FSUFFIX[@],f,g' \
+	-e 's,[@]FGUARD[@],NO_FLOAT,' \
+	$(srcdir)/../math/domath.in > $(srcdir)/domathf.c
+
+dist_rtems_tests_DATA = mathf.scn
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../automake/compile.am
+include $(top_srcdir)/../automake/leaf.am
+
+mathf_LDADD = -lm
+
+LINK_OBJS = $(mathf_OBJECTS) $(mathf_LDADD)
+LINK_LIBS = $(mathf_LDLIBS)
+
+mathf$(EXEEXT): $(mathf_OBJECTS) $(mathf_DEPENDENCIES)
+	@rm -f mathf$(EXEEXT)
+	$(make-exe)
+
+include $(top_srcdir)/../automake/local.am
Index: testsuites/libtests/mathf/domathf.c
===================================================================
--- testsuites/libtests/mathf/domathf.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ testsuites/libtests/mathf/domathf.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,281 @@
+/*
+ * Copyright (c) 2010 by
+ * Ralf Corsepius, Ulm/Germany. All rights reserved.
+ *
+ * Permission to use, copy, modify, and distribute this software
+ * is freely granted, provided that this notice is preserved.
+ */
+
+/*
+ * Try to compile and link against POSIX math routines.
+ */
+
+#include <math.h>
+#include <stdio.h>
+
+#ifndef M_PI_2
+#define M_PI_2 1.57079632679489661923
+#endif
+
+#ifndef M_PI_4
+#define M_PI_4 0.78539816339744830962
+#endif
+
+void
+domathf (void)
+{
+#ifndef NO_FLOAT
+  float f1;
+  float f2;
+
+  int i1;
+
+  f1 = acosf(0.0);
+  fprintf( stdout, "acosf          : %f\n", f1);
+
+  f1 = acoshf(0.0);
+  fprintf( stdout, "acoshf         : %f\n", f1);
+
+  f1 = asinf(1.0);
+  fprintf( stdout, "asinf          : %f\n", f1);
+
+  f1 = asinhf(1.0);
+  fprintf( stdout, "asinhf         : %f\n", f1);
+
+  f1 = atanf(M_PI_4);
+  fprintf( stdout, "atanf          : %f\n", f1);
+
+  f1 = atan2f(2.3, 2.3);
+  fprintf( stdout, "atan2f         : %f\n", f1);
+
+  f1 = atanhf(1.0);
+  fprintf( stdout, "atanhf         : %f\n", f1);
+
+  f1 = cbrtf(27.0);
+  fprintf( stdout, "cbrtf          : %f\n", f1);
+
+  f1 = ceilf(3.5);
+  fprintf( stdout, "ceilf          : %f\n", f1);
+
+  f1 = copysignf(3.5, -2.5);
+  fprintf( stdout, "copysignf      : %f\n", f1);
+
+  f1 = cosf(M_PI_2);
+  fprintf( stdout, "cosf           : %f\n", f1);
+
+  f1 = coshf(M_PI_2);
+  fprintf( stdout, "coshf          : %f\n", f1);
+
+  f1 = erff(42.0);
+  fprintf( stdout, "erff           : %f\n", f1);
+
+  f1 = erfcf(42.0);
+  fprintf( stdout, "erfcf          : %f\n", f1);
+
+  f1 = expf(0.42);
+  fprintf( stdout, "expf           : %f\n", f1);
+
+  f1 = exp2f(0.42);
+  fprintf( stdout, "exp2f          : %f\n", f1);
+
+  f1 = expm1f(0.00042);
+  fprintf( stdout, "expm1f         : %f\n", f1);
+
+  f1 = fabsf(-1.123);
+  fprintf( stdout, "fabsf          : %f\n", f1);
+
+  f1 = fdimf(1.123, 2.123);
+  fprintf( stdout, "fdimf          : %f\n", f1);
+
+  f1 = floorf(0.5);
+  fprintf( stdout, "floorf         : %f\n", f1);
+  f1 = floorf(-0.5);
+  fprintf( stdout, "floorf         : %f\n", f1);
+
+  f1 = fmaf(2.1, 2.2, 3.01);
+  fprintf( stdout, "fmaf           : %f\n", f1);
+
+  f1 = fmaxf(-0.42, 0.42);
+  fprintf( stdout, "fmaxf          : %f\n", f1);
+
+  f1 = fminf(-0.42, 0.42);
+  fprintf( stdout, "fminf          : %f\n", f1);
+
+  f1 = fmodf(42.0, 3.0);
+  fprintf( stdout, "fmodf          : %f\n", f1);
+
+  /* no type-specific variant */
+  i1 = fpclassify(1.0);
+  fprintf( stdout, "fpclassify     : %d\n", i1);
+
+  f1 = frexpf(42.0, &i1);
+  fprintf( stdout, "frexpf         : %f\n", f1);
+
+  f1 = hypotf(42.0, 42.0);
+  fprintf( stdout, "hypotf         : %f\n", f1);
+
+  i1 = ilogbf(42.0);
+  fprintf( stdout, "ilogbf         : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = isfinite(3.0);
+  fprintf( stdout, "isfinite       : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = isgreater(3.0, 3.1);
+  fprintf( stdout, "isgreater      : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = isgreaterequal(3.0, 3.1);
+  fprintf( stdout, "isgreaterequal : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = isinf(3.0);
+  fprintf( stdout, "isinf          : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = isless(3.0, 3.1);
+  fprintf( stdout, "isless         : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = islessequal(3.0, 3.1);
+  fprintf( stdout, "islessequal    : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = islessgreater(3.0, 3.1);
+  fprintf( stdout, "islessgreater  : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = isnan(0.0);
+  fprintf( stdout, "isnan          : %d\n", i1);
+
+  /* no type-specific variant */
+  i1 = isnormal(3.0);
+  fprintf( stdout, "isnormal       : %d\n", i1);
+
+  /* no type-specific variant */
+  f1 = isunordered(1.0, 2.0);
+  fprintf( stdout, "isunordered    : %d\n", i1);
+
+  f1 = j0f(1.2);
+  fprintf( stdout, "j0f            : %f\n", f1);
+
+  f1 = j1f(1.2);
+  fprintf( stdout, "j1f            : %f\n", f1);
+
+  f1 = jnf(2,1.2);
+  fprintf( stdout, "jnf            : %f\n", f1);
+
+  f1 = ldexpf(1.2,3);
+  fprintf( stdout, "ldexpf         : %f\n", f1);
+
+  f1 = lgammaf(42.0);
+  fprintf( stdout, "lgammaf        : %f\n", f1);
+
+  f1 = llrintf(-0.5);
+  fprintf( stdout, "llrintf        : %f\n", f1);
+  f1 = llrintf(0.5);
+  fprintf( stdout, "llrintf        : %f\n", f1);
+
+  f1 = llroundf(-0.5);
+  fprintf( stdout, "lroundf        : %f\n", f1);
+  f1 = llroundf(0.5);
+  fprintf( stdout, "lroundf        : %f\n", f1);
+
+  f1 = logf(42.0);
+  fprintf( stdout, "logf           : %f\n", f1);
+
+  f1 = log10f(42.0);
+  fprintf( stdout, "log10f         : %f\n", f1);
+
+  f1 = log1pf(42.0);
+  fprintf( stdout, "log1pf         : %f\n", f1);
+
+  f1 = log2f(42.0);
+  fprintf( stdout, "log2f          : %f\n", f1);
+
+  f1 = logbf(42.0);
+  fprintf( stdout, "logbf          : %f\n", f1);
+
+  f1 = lrintf(-0.5);
+  fprintf( stdout, "lrintf         : %f\n", f1);
+  f1 = lrintf(0.5);
+  fprintf( stdout, "lrintf         : %f\n", f1);
+
+  f1 = lroundf(-0.5);
+  fprintf( stdout, "lroundf        : %f\n", f1);
+  f1 = lroundf(0.5);
+  fprintf( stdout, "lroundf        : %f\n", f1);
+
+  f1 = modff(42.0,&f2);
+  fprintf( stdout, "lmodff         : %f\n", f1);
+
+  f1 = nanf("");
+  fprintf( stdout, "nanf           : %f\n", f1);
+
+  f1 = nearbyintf(1.5);
+  fprintf( stdout, "nearbyintf     : %f\n", f1);
+
+  f1 = nextafterf(1.5,2.0);
+  fprintf( stdout, "nextafterf     : %f\n", f1);
+
+  f1 = powf(3.01, 2.0);
+  fprintf( stdout, "powf           : %f\n", f1);
+
+  f1 = remainderf(3.01,2.0);
+  fprintf( stdout, "remainderf     : %f\n", f1);
+
+  f1 = remquof(29.0,3.0,&i1);
+  fprintf( stdout, "remquof        : %f\n", f1);
+
+  f1 = rintf(0.5);
+  fprintf( stdout, "rintf          : %f\n", f1);
+  f1 = rintf(-0.5);
+  fprintf( stdout, "rintf          : %f\n", f1);
+
+  f1 = roundf(0.5);
+  fprintf( stdout, "roundf         : %f\n", f1);
+  f1 = roundf(-0.5);
+  fprintf( stdout, "roundf         : %f\n", f1);
+
+  f1 = scalblnf(1.2,3);
+  fprintf( stdout, "scalblnf       : %f\n", f1);
+
+  f1 = scalbnf(1.2,3);
+  fprintf( stdout, "scalbnf        : %f\n", f1);
+
+  /* no type-specific variant */
+  i1 = signbit(1.0);
+  fprintf( stdout, "signbit        : %i\n", i1);
+
+  f1 = sinf(M_PI_4);
+  fprintf( stdout, "sinf           : %f\n", f1);
+
+  f1 = sinhf(M_PI_4);
+  fprintf( stdout, "sinhf          : %f\n", f1);
+
+  f1 = sqrtf(9.0);
+  fprintf( stdout, "sqrtf          : %f\n", f1);
+
+  f1 = tanf(M_PI_4);
+  fprintf( stdout, "tanf           : %f\n", f1);
+
+  f1 = tanhf(M_PI_4);
+  fprintf( stdout, "tanhf          : %f\n", f1);
+
+  f1 = tgammaf(2.1);
+  fprintf( stdout, "tgammaf        : %f\n", f1);
+
+  f1 = truncf(3.5);
+  fprintf( stdout, "truncf         : %f\n", f1);
+
+  f1 = y0f(1.2);
+  fprintf( stdout, "y0f            : %f\n", f1);
+
+  f1 = y1f(1.2);
+  fprintf( stdout, "y1f            : %f\n", f1);
+
+  f1 = ynf(3,1.2);
+  fprintf( stdout, "ynf            : %f\n", f1);
+#endif
+}
Index: testsuites/libtests/mathf/init.c
===================================================================
--- testsuites/libtests/mathf/init.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ testsuites/libtests/mathf/init.c	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,62 @@
+/*  Init
+ *
+ *  This routine is the initialization task for this test program.
+ *  It is called from init_exec and has the responsibility for creating
+ *  and starting the tasks that make up the test.  If the time of day
+ *  clock is required for the test, it should also be set to a known
+ *  value by this function.
+ *
+ *  Input parameters:  NONE
+ *
+ *  Output parameters:  NONE
+ *
+ *  COPYRIGHT (c) 1989-1999.
+ *  On-Line Applications Research Corporation (OAR).
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+
+#if __rtems__
+#include <bsp.h> /* for device driver prototypes */
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+
+extern void domathf(void);
+
+#if __rtems__
+rtems_task Init(
+  rtems_task_argument ignored
+)
+#else
+int main( void )
+#endif
+{
+  fprintf( stdout, "*** FLOAT MATH TEST ***\n" );
+
+  domathf();  
+
+  fprintf( stdout, "*** END OF FLOAT MATH TEST ***\n" );
+  exit( 0 );
+}
+
+#if __rtems__
+/* NOTICE: the clock driver is explicitly disabled */
+#define CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER
+#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
+
+#define CONFIGURE_MAXIMUM_TASKS           1
+#define CONFIGURE_INIT_TASK_ATTRIBUTES    RTEMS_FLOATING_POINT
+
+#define CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
+
+#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
+
+#define CONFIGURE_INIT
+#include <rtems/confdefs.h>
+#endif
Index: testsuites/libtests/mathf/mathf.scn
===================================================================
--- testsuites/libtests/mathf/mathf.scn	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
+++ testsuites/libtests/mathf/mathf.scn	(revision 0987f475e27141fb0fde3622d3b5c8839f5fcd0a)
@@ -0,0 +1,83 @@
+*** FLOAT MATH TEST ***
+acosf          : 1.570796
+acoshf         : -nan
+asinf          : 1.570796
+asinhf         : 0.881374
+atanf          : 0.665774
+atan2f         : 0.785398
+atanhf         : inf
+cbrtf          : 3.000000
+ceilf          : 4.000000
+copysignf      : -3.500000
+cosf           : -0.000000
+coshf          : 2.509179
+erff           : 1.000000
+erfcf          : 0.000000
+expf           : 1.521962
+exp2f          : 1.337928
+expm1f         : 0.000420
+fabsf          : 1.123000
+fdimf          : 0.000000
+floorf         : 0.000000
+floorf         : -1.000000
+fmaf           : 7.630000
+fmaxf          : 0.420000
+fminf          : -0.420000
+fmodf          : 0.000000
+fpclassify     : 4
+frexpf         : 0.656250
+hypotf         : 59.396969
+ilogbf         : 5
+isfinite       : 1
+isgreater      : 0
+isgreaterequal : 0
+isinf          : 0
+isless         : 1
+islessequal    : 1
+islessgreater  : 1
+isnan          : 0
+isnormal       : 1
+isunordered    : 1
+j0f            : 0.671133
+j1f            : 0.498289
+jnf            : 0.159349
+ldexpf         : 9.600000
+lgammaf        : 114.034218
+llrintf        : 0.000000
+llrintf        : 0.000000
+lroundf        : -1.000000
+lroundf        : 1.000000
+logf           : 3.737670
+log10f         : 1.623249
+log1pf         : 3.761200
+log2f          : 5.392317
+logbf          : 5.000000
+lrintf         : 0.000000
+lrintf         : 0.000000
+lroundf        : -1.000000
+lroundf        : 1.000000
+lmodff         : 0.000000
+nanf           : nan
+nearbyintf     : 2.000000
+nextafterf     : 1.500000
+powf           : 9.060100
+remainderf     : -0.990000
+remquof        : -1.000000
+rintf          : 0.000000
+rintf          : -0.000000
+roundf         : 1.000000
+roundf         : -1.000000
+scalblnf       : 9.600000
+scalbnf        : 9.600000
+signbit        : 0
+sinf           : 0.707107
+sinhf          : 0.868671
+sqrtf          : 3.000000
+tanf           : 1.000000
+tanhf          : 0.655794
+tgammaf        : 1.046486
+truncf         : 3.000000
+y0f            : 0.228083
+y1f            : -0.621136
+ynf            : -3.589899
+*** END OF FLOAT MATH TEST ***
