Changeset 09213ec3 in rtems


Ignore:
Timestamp:
Oct 5, 1998, 1:53:16 PM (21 years ago)
Author:
Joel Sherrill <joel.sherrill@…>
Branches:
4.10, 4.11, 4.8, 4.9, master
Children:
fe64e9f
Parents:
bf1ef5b
Message:

Patch from Ralf Corsepius <corsepiu@…>:

As mentioned in other mails before, there is are minor inconsistencies in the
posix custom/*cfg files.

Linux-posix.cfg sets RTEMS_BSP=posix
FreeBSD-posix.cfg sets RTEMS_BSP=posix
Solaris-posix.cfg first sets RTEMS_BSP=posix, later it sets

RTEMS_BSP=solaris2

  1. Setting RTEMS_BSP=posix is redunant to settings in default.cfg
  2. The solaris variant of setting RTEMS_BSP is merely non-functional.

The patch attached to this mail should clean up this issue.

The patch was tested by building the posix bsp under
i686-pc-linux-glibc1/glibc2 and Solaris2.6 (I did not run any
rtems program, however) The HPUX9 and FreeBSD configuration files
were adapted in analogy to the solaris and linux configurations.

Files:
5 edited

Legend:

Unmodified
Added
Removed
  • configure

    rbf1ef5b r09213ec3  
    24782478  cat > conftest.s << EOF
    24792479         .code16
    2480          data32 addr32 lgdt 0
     2480         data32
     2481         addr32
     2482         lgdt 0
    24812483EOF
    2482       if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2483: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
     2484      if { ac_try='$AS_FOR_TARGET -o conftest.o conftest.s'; { (eval echo configure:2485: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
    24832485        rtems_cv_prog_gas_code16=yes
    24842486      else
     
    24952497set dummy gcc; ac_word=$2
    24962498echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
    2497 echo "configure:2498: checking for $ac_word" >&5
     2499echo "configure:2500: checking for $ac_word" >&5
    24982500if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
    24992501  echo $ac_n "(cached) $ac_c" 1>&6
     
    25242526set dummy cc; ac_word=$2
    25252527echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
    2526 echo "configure:2527: checking for $ac_word" >&5
     2528echo "configure:2529: checking for $ac_word" >&5
    25272529if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
    25282530  echo $ac_n "(cached) $ac_c" 1>&6
     
    25722574
    25732575echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
    2574 echo "configure:2575: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
     2576echo "configure:2577: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
    25752577
    25762578ac_ext=c
     
    25822584
    25832585cat > conftest.$ac_ext <<EOF
    2584 #line 2585 "configure"
     2586#line 2587 "configure"
    25852587#include "confdefs.h"
    25862588main(){return(0);}
    25872589EOF
    2588 if { (eval echo configure:2589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
     2590if { (eval echo configure:2591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
    25892591  ac_cv_prog_cc_works=yes
    25902592  # If we can't run a trivial program, we are probably using a cross compiler.
     
    26062608fi
    26072609echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
    2608 echo "configure:2609: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
     2610echo "configure:2611: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
    26092611echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
    26102612cross_compiling=$ac_cv_prog_cc_cross
    26112613
    26122614echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
    2613 echo "configure:2614: checking whether we are using GNU C" >&5
     2615echo "configure:2616: checking whether we are using GNU C" >&5
    26142616if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
    26152617  echo $ac_n "(cached) $ac_c" 1>&6
     
    26202622#endif
    26212623EOF
    2622 if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2623: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
     2624if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2625: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
    26232625  ac_cv_prog_gcc=yes
    26242626else
     
    26352637  CFLAGS=
    26362638  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
    2637 echo "configure:2638: checking whether ${CC-cc} accepts -g" >&5
     2639echo "configure:2640: checking whether ${CC-cc} accepts -g" >&5
    26382640if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
    26392641  echo $ac_n "(cached) $ac_c" 1>&6
     
    26642666
    26652667echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
    2666 echo "configure:2667: checking for Cygwin32 environment" >&5
     2668echo "configure:2669: checking for Cygwin32 environment" >&5
    26672669if eval "test \"`echo '$''{'rtems_cv_cygwin32'+set}'`\" = set"; then
    26682670  echo $ac_n "(cached) $ac_c" 1>&6
    26692671else
    26702672  cat > conftest.$ac_ext <<EOF
    2671 #line 2672 "configure"
     2673#line 2674 "configure"
    26722674#include "confdefs.h"
    26732675
     
    26762678; return 0; }
    26772679EOF
    2678 if { (eval echo configure:2679: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     2680if { (eval echo configure:2681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    26792681  rm -rf conftest*
    26802682  rtems_cv_cygwin32=yes
     
    26942696
    26952697echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
    2696 echo "configure:2697: checking for executable suffix" >&5
     2698echo "configure:2699: checking for executable suffix" >&5
    26972699if eval "test \"`echo '$''{'rtems_cv_exeext'+set}'`\" = set"; then
    26982700  echo $ac_n "(cached) $ac_c" 1>&6
     
    27302732do
    27312733echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
    2732 echo "configure:2733: checking for $ac_func" >&5
     2734echo "configure:2735: checking for $ac_func" >&5
    27332735if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
    27342736  echo $ac_n "(cached) $ac_c" 1>&6
    27352737else
    27362738  cat > conftest.$ac_ext <<EOF
    2737 #line 2738 "configure"
     2739#line 2740 "configure"
    27382740#include "confdefs.h"
    27392741/* System header to define __stub macros and hopefully few prototypes,
     
    27582760; return 0; }
    27592761EOF
    2760 if { (eval echo configure:2761: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
     2762if { (eval echo configure:2763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
    27612763  rm -rf conftest*
    27622764  eval "ac_cv_func_$ac_func=yes"
     
    27872789
    27882790echo $ac_n "checking whether $RTEMS_HOST supports System V semaphores""... $ac_c" 1>&6
    2789 echo "configure:2790: checking whether $RTEMS_HOST supports System V semaphores" >&5
     2791echo "configure:2792: checking whether $RTEMS_HOST supports System V semaphores" >&5
    27902792if eval "test \"`echo '$''{'rtems_cv_sysv_sem'+set}'`\" = set"; then
    27912793  echo $ac_n "(cached) $ac_c" 1>&6
     
    27962798else
    27972799  cat > conftest.$ac_ext <<EOF
    2798 #line 2799 "configure"
     2800#line 2801 "configure"
    27992801#include "confdefs.h"
    28002802
     
    28222824
    28232825EOF
    2824 if { (eval echo configure:2825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
     2826if { (eval echo configure:2827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
    28252827then
    28262828  rtems_cv_sysv_sem="yes"
     
    28452847
    28462848echo $ac_n "checking whether $RTEMS_HOST supports System V shared memory""... $ac_c" 1>&6
    2847 echo "configure:2848: checking whether $RTEMS_HOST supports System V shared memory" >&5
     2849echo "configure:2850: checking whether $RTEMS_HOST supports System V shared memory" >&5
    28482850if eval "test \"`echo '$''{'rtems_cv_sysv_shm'+set}'`\" = set"; then
    28492851  echo $ac_n "(cached) $ac_c" 1>&6
     
    28542856else
    28552857  cat > conftest.$ac_ext <<EOF
    2856 #line 2857 "configure"
     2858#line 2859 "configure"
    28572859#include "confdefs.h"
    28582860
     
    28702872
    28712873EOF
    2872 if { (eval echo configure:2873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
     2874if { (eval echo configure:2875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
    28732875then
    28742876  rtems_cv_sysv_shm="yes"
     
    28932895
    28942896echo $ac_n "checking whether $RTEMS_HOST supports System V messages""... $ac_c" 1>&6
    2895 echo "configure:2896: checking whether $RTEMS_HOST supports System V messages" >&5
     2897echo "configure:2898: checking whether $RTEMS_HOST supports System V messages" >&5
    28962898if eval "test \"`echo '$''{'rtems_cv_sysv_msg'+set}'`\" = set"; then
    28972899  echo $ac_n "(cached) $ac_c" 1>&6
     
    29022904else
    29032905  cat > conftest.$ac_ext <<EOF
    2904 #line 2905 "configure"
     2906#line 2907 "configure"
    29052907#include "confdefs.h"
    29062908
     
    29182920
    29192921EOF
    2920 if { (eval echo configure:2921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
     2922if { (eval echo configure:2923: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
    29212923then
    29222924  rtems_cv_sysv_msg="yes"
     
    29432945
    29442946echo $ac_n "checking for Makefile.in in c/src/exec/score/tools/$target_cpu""... $ac_c" 1>&6
    2945 echo "configure:2946: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5
     2947echo "configure:2948: checking for Makefile.in in c/src/exec/score/tools/$target_cpu" >&5
    29462948if test -d $srcdir/c/src/exec/score/tools/$target_cpu; then
    29472949  rtems_av_save_dir=`pwd`;
     
    29582960
    29592961echo $ac_n "checking for Makefile.in in c/src/exec/rtems""... $ac_c" 1>&6
    2960 echo "configure:2961: checking for Makefile.in in c/src/exec/rtems" >&5
     2962echo "configure:2963: checking for Makefile.in in c/src/exec/rtems" >&5
    29612963if test -d $srcdir/c/src/exec/rtems; then
    29622964  rtems_av_save_dir=`pwd`;
     
    29732975
    29742976echo $ac_n "checking for Makefile.in in c/src/exec/sapi""... $ac_c" 1>&6
    2975 echo "configure:2976: checking for Makefile.in in c/src/exec/sapi" >&5
     2977echo "configure:2978: checking for Makefile.in in c/src/exec/sapi" >&5
    29762978if test -d $srcdir/c/src/exec/sapi; then
    29772979  rtems_av_save_dir=`pwd`;
     
    29902992 
    29912993echo $ac_n "checking for Makefile.in in c/src/exec/posix""... $ac_c" 1>&6
    2992 echo "configure:2993: checking for Makefile.in in c/src/exec/posix" >&5
     2994echo "configure:2995: checking for Makefile.in in c/src/exec/posix" >&5
    29932995if test -d $srcdir/c/src/exec/posix; then
    29942996  rtems_av_save_dir=`pwd`;
     
    30123014  if test -z "$rtems_bsp"; then
    30133015    echo $ac_n "checking for bsps""... $ac_c" 1>&6
    3014 echo "configure:3015: checking for bsps" >&5
     3016echo "configure:3017: checking for bsps" >&5
    30153017    files=`ls $srcdir/c/src/lib/libbsp/$target_cpu`
    30163018    for file in $files; do
     
    30773079       
    30783080echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir""... $ac_c" 1>&6
    3079 echo "configure:3080: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5
     3081echo "configure:3082: checking for Makefile.in in c/src/lib/libbsp/$bspcpudir$bspdir" >&5
    30803082if test -d $srcdir/c/src/lib/libbsp/$bspcpudir$bspdir; then
    30813083  rtems_av_save_dir=`pwd`;
     
    30923094       
    30933095echo $ac_n "checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared""... $ac_c" 1>&6
    3094 echo "configure:3095: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5
     3096echo "configure:3097: checking for Makefile.in in c/src/lib/libbsp/${bspcpudir}shared" >&5
    30953097if test -d $srcdir/c/src/lib/libbsp/${bspcpudir}shared; then
    30963098  rtems_av_save_dir=`pwd`;
     
    31153117
    31163118echo $ac_n "checking for Makefile.in in c/src/lib/libcpu/$target_cpu""... $ac_c" 1>&6
    3117 echo "configure:3118: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5
     3119echo "configure:3120: checking for Makefile.in in c/src/lib/libcpu/$target_cpu" >&5
    31183120if test -d $srcdir/c/src/lib/libcpu/$target_cpu; then
    31193121  rtems_av_save_dir=`pwd`;
     
    31323134 
    31333135echo $ac_n "checking for Makefile.in in c/src/lib/start/$target_cpu""... $ac_c" 1>&6
    3134 echo "configure:3135: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5
     3136echo "configure:3137: checking for Makefile.in in c/src/lib/start/$target_cpu" >&5
    31353137if test -d $srcdir/c/src/lib/start/$target_cpu; then
    31363138  rtems_av_save_dir=`pwd`;
     
    31643166# If the TCP/IP stack is enabled, then find all TCP/IP Makefiles
    31653167echo $ac_n "checking if networking is enabled? ""... $ac_c" 1>&6
    3166 echo "configure:3167: checking if networking is enabled? " >&5
     3168echo "configure:3169: checking if networking is enabled? " >&5
    31673169echo "$ac_t""$RTEMS_HAS_NETWORKING" 1>&6
    31683170if test "$RTEMS_HAS_NETWORKING" = "yes"; then
    31693171 
    31703172echo $ac_n "checking for Makefile.in in c/src/lib/libnetworking""... $ac_c" 1>&6
    3171 echo "configure:3172: checking for Makefile.in in c/src/lib/libnetworking" >&5
     3173echo "configure:3174: checking for Makefile.in in c/src/lib/libnetworking" >&5
    31723174if test -d $srcdir/c/src/lib/libnetworking; then
    31733175  rtems_av_save_dir=`pwd`;
     
    31913193# If the tests are enabled, then find all the test suite Makefiles
    31923194echo $ac_n "checking if the test suites are enabled? ""... $ac_c" 1>&6
    3193 echo "configure:3194: checking if the test suites are enabled? " >&5
     3195echo "configure:3196: checking if the test suites are enabled? " >&5
    31943196tests_enabled=yes
    31953197# Check whether --enable-tests or --disable-tests was given.
     
    32103212
    32113213echo $ac_n "checking for Makefile.in in c/src/tests/tools/$target_cpu""... $ac_c" 1>&6
    3212 echo "configure:3213: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5
     3214echo "configure:3215: checking for Makefile.in in c/src/tests/tools/$target_cpu" >&5
    32133215if test -d $srcdir/c/src/tests/tools/$target_cpu; then
    32143216  rtems_av_save_dir=`pwd`;
     
    32273229   
    32283230echo $ac_n "checking for Makefile.in in c/src/tests/libtests""... $ac_c" 1>&6
    3229 echo "configure:3230: checking for Makefile.in in c/src/tests/libtests" >&5
     3231echo "configure:3232: checking for Makefile.in in c/src/tests/libtests" >&5
    32303232if test -d $srcdir/c/src/tests/libtests; then
    32313233  rtems_av_save_dir=`pwd`;
     
    32423244   
    32433245echo $ac_n "checking for Makefile.in in c/src/tests/sptests""... $ac_c" 1>&6
    3244 echo "configure:3245: checking for Makefile.in in c/src/tests/sptests" >&5
     3246echo "configure:3247: checking for Makefile.in in c/src/tests/sptests" >&5
    32453247if test -d $srcdir/c/src/tests/sptests; then
    32463248  rtems_av_save_dir=`pwd`;
     
    32573259   
    32583260echo $ac_n "checking for Makefile.in in c/src/tests/tmtests""... $ac_c" 1>&6
    3259 echo "configure:3260: checking for Makefile.in in c/src/tests/tmtests" >&5
     3261echo "configure:3262: checking for Makefile.in in c/src/tests/tmtests" >&5
    32603262if test -d $srcdir/c/src/tests/tmtests; then
    32613263  rtems_av_save_dir=`pwd`;
     
    32723274   
    32733275echo $ac_n "checking for Makefile.in in c/src/tests/mptests""... $ac_c" 1>&6
    3274 echo "configure:3275: checking for Makefile.in in c/src/tests/mptests" >&5
     3276echo "configure:3277: checking for Makefile.in in c/src/tests/mptests" >&5
    32753277if test -d $srcdir/c/src/tests/mptests; then
    32763278  rtems_av_save_dir=`pwd`;
     
    32883290     
    32893291echo $ac_n "checking for Makefile.in in c/src/tests/psxtests""... $ac_c" 1>&6
    3290 echo "configure:3291: checking for Makefile.in in c/src/tests/psxtests" >&5
     3292echo "configure:3293: checking for Makefile.in in c/src/tests/psxtests" >&5
    32913293if test -d $srcdir/c/src/tests/psxtests; then
    32923294  rtems_av_save_dir=`pwd`;
     
    33063308# If the HWAPI is enabled, the find the HWAPI Makefiles
    33073309echo $ac_n "checking if the HWAPI is enabled? ""... $ac_c" 1>&6
    3308 echo "configure:3309: checking if the HWAPI is enabled? " >&5
     3310echo "configure:3311: checking if the HWAPI is enabled? " >&5
    33093311# Check whether --enable-hwapi or --disable-hwapi was given.
    33103312if test "${enable_hwapi+set}" = set; then
     
    33173319           
    33183320echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/analog""... $ac_c" 1>&6
    3319 echo "configure:3320: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5
     3321echo "configure:3322: checking for Makefile.in in c/src/lib/libhwapi/analog" >&5
    33203322if test -d $srcdir/c/src/lib/libhwapi/analog; then
    33213323  rtems_av_save_dir=`pwd`;
     
    33323334           
    33333335echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/discrete""... $ac_c" 1>&6
    3334 echo "configure:3335: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5
     3336echo "configure:3337: checking for Makefile.in in c/src/lib/libhwapi/discrete" >&5
    33353337if test -d $srcdir/c/src/lib/libhwapi/discrete; then
    33363338  rtems_av_save_dir=`pwd`;
     
    33473349           
    33483350echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/drivers""... $ac_c" 1>&6
    3349 echo "configure:3350: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5
     3351echo "configure:3352: checking for Makefile.in in c/src/lib/libhwapi/drivers" >&5
    33503352if test -d $srcdir/c/src/lib/libhwapi/drivers; then
    33513353  rtems_av_save_dir=`pwd`;
     
    33623364           
    33633365echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory""... $ac_c" 1>&6
    3364 echo "configure:3365: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5
     3366echo "configure:3367: checking for Makefile.in in c/src/lib/libhwapi/non_volatile_memory" >&5
    33653367if test -d $srcdir/c/src/lib/libhwapi/non_volatile_memory; then
    33663368  rtems_av_save_dir=`pwd`;
     
    33773379           
    33783380echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/serial""... $ac_c" 1>&6
    3379 echo "configure:3380: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5
     3381echo "configure:3382: checking for Makefile.in in c/src/lib/libhwapi/serial" >&5
    33803382if test -d $srcdir/c/src/lib/libhwapi/serial; then
    33813383  rtems_av_save_dir=`pwd`;
     
    33923394           
    33933395echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/support""... $ac_c" 1>&6
    3394 echo "configure:3395: checking for Makefile.in in c/src/lib/libhwapi/support" >&5
     3396echo "configure:3397: checking for Makefile.in in c/src/lib/libhwapi/support" >&5
    33953397if test -d $srcdir/c/src/lib/libhwapi/support; then
    33963398  rtems_av_save_dir=`pwd`;
     
    34073409           
    34083410echo $ac_n "checking for Makefile.in in c/src/lib/libhwapi/wrapup""... $ac_c" 1>&6
    3409 echo "configure:3410: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5
     3411echo "configure:3412: checking for Makefile.in in c/src/lib/libhwapi/wrapup" >&5
    34103412if test -d $srcdir/c/src/lib/libhwapi/wrapup; then
    34113413  rtems_av_save_dir=`pwd`;
     
    34553457
    34563458echo $ac_n "checking for Makefile.in in c/build-tools""... $ac_c" 1>&6
    3457 echo "configure:3458: checking for Makefile.in in c/build-tools" >&5
     3459echo "configure:3460: checking for Makefile.in in c/build-tools" >&5
    34583460if test -d $srcdir/c/build-tools; then
    34593461  rtems_av_save_dir=`pwd`;
     
    34703472
    34713473echo $ac_n "checking for Makefile.in in make""... $ac_c" 1>&6
    3472 echo "configure:3473: checking for Makefile.in in make" >&5
     3474echo "configure:3475: checking for Makefile.in in make" >&5
    34733475if test -d $srcdir/make; then
    34743476  rtems_av_save_dir=`pwd`;
     
    34853487
    34863488echo $ac_n "checking for Makefile.in in c/src/lib/libmisc""... $ac_c" 1>&6
    3487 echo "configure:3488: checking for Makefile.in in c/src/lib/libmisc" >&5
     3489echo "configure:3490: checking for Makefile.in in c/src/lib/libmisc" >&5
    34883490if test -d $srcdir/c/src/lib/libmisc; then
    34893491  rtems_av_save_dir=`pwd`;
     
    35003502
    35013503echo $ac_n "checking for Makefile.in in c/src/tests/samples""... $ac_c" 1>&6
    3502 echo "configure:3503: checking for Makefile.in in c/src/tests/samples" >&5
     3504echo "configure:3505: checking for Makefile.in in c/src/tests/samples" >&5
    35033505if test -d $srcdir/c/src/tests/samples; then
    35043506  rtems_av_save_dir=`pwd`;
  • make/custom/FreeBSD-posix.cfg

    rbf1ef5b r09213ec3  
    1111# This is the actual bsp directory used during the build process.
    1212RTEMS_BSP_FAMILY=posix
    13 
    14 # share the posix bsp
    1513TARGET_ARCH=o-freebsd2
    16 RTEMS_BSP=posix
    1714
    1815include $(RTEMS_ROOT)/make/custom/default.cfg
  • make/custom/HPUX9-posix.cfg

    rbf1ef5b r09213ec3  
    1616# This is the actual bsp directory used during the build process.
    1717RTEMS_BSP_FAMILY=posix
    18 
    19 # share the posix bsp
    2018TARGET_ARCH=o-hpux9
    21 RTEMS_BSP=posix
    2219
    2320include $(RTEMS_ROOT)/make/custom/default.cfg
  • make/custom/Linux-posix.cfg

    rbf1ef5b r09213ec3  
    1212# This is the actual bsp directory used during the build process.
    1313RTEMS_BSP_FAMILY=posix
    14 
    15 # share the posix bsp
    1614TARGET_ARCH=o-linux1
    17 RTEMS_BSP=posix
    1815
    1916include $(RTEMS_ROOT)/make/custom/default.cfg
  • make/custom/Solaris-posix.cfg

    rbf1ef5b r09213ec3  
    1212# This is the actual bsp directory used during the build process.
    1313RTEMS_BSP_FAMILY=posix
    14 RTEMS_BSP=posix
    15 
    16 # share the posix bsp
    17 RTEMS_BSP=solaris2
    1814TARGET_ARCH=o-solaris2
    1915
Note: See TracChangeset for help on using the changeset viewer.