Index: src/tests/libtests/.cvsignore
===================================================================
--- c/src/tests/libtests/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,14 +1,0 @@
-aclocal.m4
-autom4te*.cache
-config.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-depcomp
-install-sh
-Makefile
-Makefile.in
-missing
-mkinstalldirs
Index: src/tests/libtests/ChangeLog
===================================================================
--- c/src/tests/libtests/ChangeLog	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,226 +1,0 @@
-2003-11-10	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* cpuuse/.cvsignore: Remove.
-	* cpuuse/Makefile.am: Remove.
-	* cpuuse/cpuuse.scn: Remove.
-	* cpuuse/init.c: Remove.
-	* cpuuse/system.h: Remove.
-	* cpuuse/task1.c: Remove.
-	* cpuuse/task2.c: Remove.
-	* cpuuse/task3.c: Remove.
-	* cpuuse/tswitch.c: Remove.
-	* .cvsignore: Remove.
-	* ChangeLog: Remove.
-	* Makefile.am: Remove.
-	* README: Remove.
-	* configure.ac: Remove.
-	* libtests.am: Remove.
-	* malloctest/.cvsignore: Remove.
-	* malloctest/Makefile.am: Remove.
-	* malloctest/init.c: Remove.
-	* malloctest/malloctest.scn: Remove.
-	* malloctest/system.h: Remove.
-	* malloctest/task1.c: Remove.
-	* monitor/.cvsignore: Remove.
-	* monitor/Makefile.am: Remove.
-	* monitor/init.c: Remove.
-	* monitor/system.h: Remove.
-	* putenvtest/.cvsignore: Remove.
-	* putenvtest/Makefile.am: Remove.
-	* putenvtest/init.c: Remove.
-	* rtems++/.cvsignore: Remove.
-	* rtems++/Init.cc: Remove.
-	* rtems++/Makefile.am: Remove.
-	* rtems++/System.h: Remove.
-	* rtems++/Task1.cc: Remove.
-	* rtems++/Task2.cc: Remove.
-	* rtems++/Task3.cc: Remove.
-	* rtems++/rtems++.doc: Remove.
-	* rtems++/rtems++.scn: Remove.
-	* rtmonuse/.cvsignore: Remove.
-	* rtmonuse/Makefile.am: Remove.
-	* rtmonuse/getall.c: Remove.
-	* rtmonuse/init.c: Remove.
-	* rtmonuse/rtmonuse.scn: Remove.
-	* rtmonuse/system.h: Remove.
-	* rtmonuse/task1.c: Remove.
-	* stackchk/.cvsignore: Remove.
-	* stackchk/Makefile.am: Remove.
-	* stackchk/blow.c: Remove.
-	* stackchk/init.c: Remove.
-	* stackchk/stackchk.scn: Remove.
-	* stackchk/system.h: Remove.
-	* stackchk/task1.c: Remove.
-	* termios/.cvsignore: Remove.
-	* termios/Makefile.am: Remove.
-	* termios/README: Remove.
-	* termios/init.c: Remove.
-
-2003-10-22	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove RTEMS_CANONICAL_HOST.
-
-2003-10-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac:Remove RTEMS_CHECK_CPU.
-
-2003-09-04	Joel Sherrill <joel@OARcorp.com>
-
-	* cpuuse/init.c, cpuuse/system.h, cpuuse/task1.c, cpuuse/task2.c,
-	cpuuse/task3.c, cpuuse/tswitch.c, malloctest/init.c,
-	malloctest/system.h, malloctest/task1.c, monitor/init.c,
-	monitor/system.h, putenvtest/init.c, rtems++/Init.cc,
-	rtems++/System.h, rtems++/Task1.cc, rtems++/Task2.cc,
-	rtems++/Task3.cc, rtems++/rtems++.doc, rtmonuse/getall.c,
-	rtmonuse/init.c, rtmonuse/system.h, rtmonuse/task1.c,
-	stackchk/blow.c, stackchk/init.c, stackchk/system.h,
-	stackchk/task1.c: URL for license changed.
-
-2003-08-18	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved aclocal/.
-
-2003-08-16	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Reflect having moved automake/.
-	* cpuuse/Makefile.am: Reflect having moved automake/.
-	* malloctest/Makefile.am: Reflect having moved automake/.
-	* monitor/Makefile.am: Reflect having moved automake/.
-	* putenvtest/Makefile.am: Reflect having moved automake/.
-	* rtems++/Makefile.am: Reflect having moved automake/.
-	* rtmonuse/Makefile.am: Reflect having moved automake/.
-	* stackchk/Makefile.am: Reflect having moved automake/.
-	* termios/Makefile.am: Reflect having moved automake/.
-
-2003-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Use rtems-bugs@rtems.com as bug report email address.
-
-2003-03-06	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove AC_CONFIG_AUX_DIR.
-
-2003-02-03	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Unconditionally check for CXX.
-	Require autoconf-2.57, automake-1.7.2.
-	* rtems++: Eliminate CC_O_FILES.
-
-2002-12-02	Joel Sherrill <joel@OARcorp.com>
-
-	* malloctest/init.c: Tasks should be floating point.
-
-2002-10-21	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Reformat.
-	Add autom4te*cache.
-	Remove autom4te.cache.
-
-2002-08-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* cpuuse/Makefile.am: Use $(OBJEXT) instead of .o.
-	* malloctest/Makefile.am: Use $(OBJEXT) instead of .o.
-	* monitor/Makefile.am: Use $(OBJEXT) instead of .o.
-	* putenvtest/Makefile.am: Use $(OBJEXT) instead of .o.
-	* rtems++/Makefile.am: Use $(OBJEXT) instead of .o.
-	* rtmonuse/Makefile.am: Use $(OBJEXT) instead of .o.
-	* stackchk/Makefile.am: Use $(OBJEXT) instead of .o.
-	* termios/Makefile.am: Use $(OBJEXT) instead of .o.
-
-2002-08-01	Joel Sherrill <joel@OARcorp.com>
-
-	* Per PR47 add support for buffered test output.  This involved
-	adding defines to redirect output to a buffer and dump it when
-	full, at "test pause", and at exit.  To avoid problems when redefining
-	exit(), all tests were modified to call rtems_test_exit().
-	Some tests, notable psxtests, had to be modified to include 
-	the standard test macro .h file (pmacros.h or tmacros.h) to
-	enable this support.
-	* cpuuse/task2.c, malloctest/task1.c, putenvtest/init.c,
-	rtmonuse/task1.c, termios/init.c: Modified.
-
-2002-04-14	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac: Remove ENABLE_GCC28.
-
-2002-03-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* configure.ac:
-	AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
-	AM_INIT_AUTOMAKE([no-define foreign 1.6]).
-	* cpuuse/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* malloctest/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* monitor/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* putenvtest/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* rtems++/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* rtmonuse/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* stackchk/Makefile.am: Remove AUTOMAKE_OPTIONS.
-	* termios/Makefile.am: Remove AUTOMAKE_OPTIONS.
-
-2001-11-01	Joel Sherrill <joel@OARcorp.com>
-
-	* rtems++/Makefile.am: Make sure debug variant of librtems++ 
-	is linked against.  Reported by Jerry Needell <jerry.needell@unh.edu>
-	and processed as PR78.
-
-2001-10-25	Joel Sherrill <joel@OARcorp.com>
-
-	* rtems++/Makefile.am: Pick up -lrtems++ even when debug.
-
-2001-10-11	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* .cvsignore: Add autom4te.cache for autoconf > 2.52.
-	* configure.in: Remove.
-	* configure.ac: New file, generated from configure.in by autoupdate.
-
-2001-09-22	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* libtests.am: Use TMPINSTALL_FILES = to make automake-1.5 happy.
-	* rtems++/Makefile.am: LD_FLAGS = -lrtems++.
-
-2001-09-19	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* malloctest/Makefile.am: include leaf.am instead of leaf.cfg.
-	* monitor/Makefile.am: include leaf.am instead of leaf.cfg.
-	* termios/Makefile.am: include leaf.am instead of leaf.cfg.
-	* putenvtest/Makefile.am: include leaf.am instead of leaf.cfg.
-	* rtems++/Makefile.am: include leaf.am instead of leaf.cfg, use
-	make-cxx-exe.
-	* stackchk/Makefile.am: include leaf.am instead of leaf.cfg.
-	* rtmonuse/Makefile.am: include leaf.am instead of leaf.cfg.
-	* cpuuse/Makefile.am: include leaf.am instead of leaf.cfg.
-
-2001-05-10	Ralf Corsepius	<corsepiu@faw.uni-ulm.de>
-
-	* configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
-
-2000-11-09	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
-
-2000-11-02	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
-
-2000-11-01	Joel Sherrill <joel@OARcorp.com>
-
-	* malloctest/task1.c: assoc.h, error.h, libio_.h, libio.h, and
-	libcsupport.h moved from libc to lib/include/rtems and now must
-	be referenced as <rtems/XXX.h>.  
-
-2000-10-27	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
-        Switch to GNU canonicalization.
-	* libtests.am: Remove DEFS.
-
-2000-09-04	Ralf Corsepius <corsepiu@faw.uni-ulm.de>
-
-	* cpuuse/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
-	putenvtest/Makefile.am, rtems++/Makefile.am, rtmonuse/Makefile.am,
-	stackchk/Makefile.am, termios/Makefile.am: Include compile.am
-
-2000-08-10	Joel Sherrill <joel@OARcorp.com>
-
-	* ChangeLog: New file.
Index: src/tests/libtests/Makefile.am
===================================================================
--- c/src/tests/libtests/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,13 +1,0 @@
-##
-## $Id$
-##
-
-ACLOCAL_AMFLAGS = -I ../aclocal
-
-SUBDIRS = cpuuse malloctest putenvtest monitor rtmonuse stackchk termios \
-    rtems++
-
-EXTRA_DIST = libtests.am
-
-include $(top_srcdir)/../automake/subdirs.am
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/README
===================================================================
--- c/src/tests/libtests/README	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,10 +1,0 @@
-#
-#  $Id$
-#
-
-This directory contains tests for some of the items in
-the lib directories.  The intent is to be able to
-verify the basic functionality of a library.  For example,
-it is important to know that the stack checker successfully
-detects tasks which both stay within and exceed their
-stack limits.
Index: src/tests/libtests/configure.ac
===================================================================
--- c/src/tests/libtests/configure.ac	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,48 +1,0 @@
-## Process this file with autoconf to produce a configure script.
-## 
-## $Id$
-
-AC_PREREQ(2.57)
-AC_INIT([rtems-c-src-tests-libtests],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
-AC_CONFIG_SRCDIR([cpuuse])
-RTEMS_TOP(../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-
-AM_INIT_AUTOMAKE([no-define foreign 1.7.2])
-AM_MAINTAINER_MODE
-
-RTEMS_ENABLE_CXX
-RTEMS_ENABLE_BARE
-
-RTEMS_ENV_RTEMSBSP
-RTEMS_CHECK_RTEMS_TEST_NO_PAUSE
-
-RTEMS_PROJECT_ROOT
-
-RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
-
-RTEMS_PROG_CXX_FOR_TARGET
-
-RTEMS_CANONICALIZE_TOOLS
-
-RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
-RTEMS_CHECK_CXX(RTEMS_BSP)
-
-AC_SUBST(BARE_CPU_CFLAGS)
-AC_SUBST(BARE_CPU_MODEL)
-
-AM_CONDITIONAL(HAS_CXX,test "$HAS_CPLUSPLUS" = "yes")
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile
-cpuuse/Makefile
-malloctest/Makefile
-monitor/Makefile
-putenvtest/Makefile
-rtems++/Makefile
-rtmonuse/Makefile
-stackchk/Makefile
-termios/Makefile
-])
-AC_OUTPUT
Index: src/tests/libtests/cpuuse/.cvsignore
===================================================================
--- c/src/tests/libtests/cpuuse/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/cpuuse/Makefile.am
===================================================================
--- c/src/tests/libtests/cpuuse/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,42 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = cpuuse
-
-MANAGERS = io rate_monotonic
-
-C_FILES = init.c task1.c task2.c task3.c tswitch.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES = system.h
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES = scn
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/cpuuse/cpuuse.scn
===================================================================
--- c/src/tests/libtests/cpuuse/cpuuse.scn	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,34 +1,0 @@
-*** CPU USAGE LIBRARY TEST ***
-TA1 - rtems_task_suspend - on Task 2
-TA1 - rtems_task_suspend - on Task 3
-TA1 - killing time
-TA1 - rtems_task_resume - on Task 2
-TA1 - rtems_task_resume - on Task 3
-TA1 - rtems_task_mode - change mode to NO RTEMS_PREEMPT
-TA1 - 09:15:10   12/31/1988
-TA1 - 09:15:11   12/31/1988
-TA1 - 09:15:12   12/31/1988
-TA1 - 09:15:13   12/31/1988
-TA1 - 09:15:14   12/31/1988
-TA1 - 09:15:15   12/31/1988
-TA1 - rtems_task_mode - change mode to RTEMS_PREEMPT
-TA1 - 09:15:00   12/31/1988
-TA2 - 09:15:04   12/31/1988
-TA3 - 09:15:05   12/31/1988
-TA1 - 09:15:06   12/31/1988
-TA2 - 09:15:07   12/31/1988
-TA3 - 09:15:08   12/31/1988
-TA1 - 09:15:09   12/31/1988
-TA2 - 09:15:16   12/31/1988
-CPU Usage by thread
-   ID        NAME        TICKS    PERCENT
-0x04010001   IDLE           0     0.000
-0x08010002   TA1         1203     0.748
-0x08010003   TA2          204     0.127
-0x08010004   TA3          202     0.126
-
-Ticks since last reset = 1601
-
-Total Units = 1609
-*** END OF CPU USAGE LIBRARY TEST ***
-NOTE: Actual time per task will vary but there should be no IDLE time.
Index: src/tests/libtests/cpuuse/init.c
===================================================================
--- c/src/tests/libtests/cpuuse/init.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,105 +1,0 @@
-/*  
- *  This is a clone of sp04 which has been modified to use the cpu monitoring
- *  library.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#define TEST_INIT
-#include "system.h"
-
-rtems_extensions_table Extensions = {
-  NULL,                      /* task create user extension */
-  NULL,                      /* task start user extension */
-  NULL,                      /* task restart user extension */
-  NULL,                      /* task delete user extension */
-  Task_switch,               /* task switch user extension */
-  NULL,                      /* task begin user extension */
-  NULL,                      /* task exitted user extension */
-  NULL                       /* fatal error user extension */
-};
-
-rtems_task Init(
-  rtems_task_argument argument
-)
-{
-  rtems_status_code status;
-  rtems_time_of_day time;
-
-  puts( "\n\n*** CPU USAGE LIBRARY TEST ***" );
-  build_time( &time, 12, 31, 1988, 9, 15, 0, 0 );
-
-  status = rtems_clock_set( &time );
-  directive_failed( status, "rtems_clock_set" );
-
-  Extension_name[ 1 ] =  rtems_build_name( 'E', 'X', 'T', ' ' );
-
-  status = rtems_extension_create(
-    Extension_name[ 1 ],
-    &Extensions,
-    &Extension_id[ 1 ]
-  );
-  directive_failed( status, "rtems_extension_create" );
-
-  Task_name[ 1 ] =  rtems_build_name( 'T', 'A', '1', ' ' );
-  Task_name[ 2 ] =  rtems_build_name( 'T', 'A', '2', ' ' );
-  Task_name[ 3 ] =  rtems_build_name( 'T', 'A', '3', ' ' );
-
-  Run_count[ 1 ] = 0;
-  Run_count[ 2 ] = 0;
-  Run_count[ 3 ] = 0;
-
-  status = rtems_task_create(
-     Task_name[ 1 ],
-     1,
-     RTEMS_MINIMUM_STACK_SIZE * 2,
-     RTEMS_TIMESLICE,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 1 ]
-  );
-  directive_failed( status, "rtems_task_create of TA1" );
-
-  status = rtems_task_create(
-     Task_name[ 2 ],
-     1,
-     RTEMS_MINIMUM_STACK_SIZE * 2,
-     RTEMS_TIMESLICE,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 2 ]
-  );
-  directive_failed( status, "rtems_task_create of TA2" );
-
-  status = rtems_task_create(
-     Task_name[ 3 ],
-     1,
-     RTEMS_MINIMUM_STACK_SIZE * 2,
-     RTEMS_TIMESLICE,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 3 ]
-  );
-  directive_failed( status, "rtems_task_create of TA3" );
-
-  status = rtems_task_start( Task_id[ 1 ], Task_1, 0 );
-  directive_failed( status, "rtems_task_start of TA1" );
-
-  status = rtems_task_start( Task_id[ 2 ], Task_2, 0 );
-  directive_failed( status, "rtems_task_start of TA2" );
-
-  status = rtems_task_start( Task_id[ 3 ], Task_3, 0 );
-  directive_failed( status, "rtems_task_start of TA3" );
-
-  status = rtems_task_delete( RTEMS_SELF );
-  directive_failed( status, "rtems_task_delete of RTEMS_SELF" );
-}
Index: src/tests/libtests/cpuuse/system.h
===================================================================
--- c/src/tests/libtests/cpuuse/system.h	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,81 +1,0 @@
-/*  system.h
- *
- *  This include file contains information that is included in every
- *  function in the test set.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <tmacros.h>
-
-/* functions */
-
-rtems_task Init(
-  rtems_task_argument argument
-);
-
-rtems_task Task_1(
-  rtems_task_argument argument
-);
- 
-rtems_task Task_2(
-  rtems_task_argument argument
-);
- 
-rtems_task Task_3(
-  rtems_task_argument argument
-);
- 
-void Task_switch(
-  rtems_tcb *unused,
-  rtems_tcb *heir
-);
-
-/* configuration information */
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define CONFIGURE_MAXIMUM_USER_EXTENSIONS     1
-#define CONFIGURE_MAXIMUM_TASKS               4
-#define CONFIGURE_TICKS_PER_TIMESLICE       100
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#define CONFIGURE_EXTRA_TASK_STACKS (6 * RTEMS_MINIMUM_STACK_SIZE)
-
-#include <confdefs.h>
-
-/* global variables */
-
-TEST_EXTERN rtems_id   Task_id[ 4 ];         /* array of task ids */
-TEST_EXTERN rtems_name Task_name[ 4 ];       /* array of task names */
-
-TEST_EXTERN rtems_id   Extension_id[ 4 ];
-TEST_EXTERN rtems_name Extension_name[ 4 ];  /* array of task names */
- 
-/* array of task run counts */
-TEST_EXTERN volatile rtems_unsigned32 Run_count[ 4 ];  
-
-/*
- * Keep track of task switches
- */
-
-struct taskSwitchLog {
-  int               taskIndex;
-  rtems_time_of_day when;
-};
-
-extern struct taskSwitchLog taskSwitchLog[];
-extern int taskSwitchLogIndex;
-volatile extern int testsFinished;
-
- 
-/* end of include file */
Index: src/tests/libtests/cpuuse/task1.c
===================================================================
--- c/src/tests/libtests/cpuuse/task1.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,102 +1,0 @@
-/*  Task_1
- *
- *  This test serves as a test task.  It verifies timeslicing activities
- *  and tswitch extension processing.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-
-rtems_task Task_1(
-  rtems_task_argument argument
-)
-{
-  rtems_unsigned32  seconds;
-  rtems_unsigned32  old_seconds;
-  rtems_mode        previous_mode;
-  rtems_time_of_day time;
-  rtems_status_code status;
-  rtems_unsigned32  start_time;
-  rtems_unsigned32  end_time;
-
-  puts( "TA1 - rtems_task_suspend - on Task 2" );
-  status = rtems_task_suspend( Task_id[ 2 ] );
-  directive_failed( status, "rtems_task_suspend of TA2" );
-
-  puts( "TA1 - rtems_task_suspend - on Task 3" );
-  status = rtems_task_suspend( Task_id[ 3 ] );
-  directive_failed( status, "rtems_task_suspend of TA3" );
-
-  status = rtems_clock_get( RTEMS_CLOCK_GET_SECONDS_SINCE_EPOCH, &start_time );
-  directive_failed( status, "rtems_clock_get" );
-
-  puts( "TA1 - killing time" );
-
-  for ( ; ; ) {
-    status = rtems_clock_get( RTEMS_CLOCK_GET_SECONDS_SINCE_EPOCH, &end_time );
-    directive_failed( status, "rtems_clock_get" );
-
-    if ( end_time > (start_time + 2) )
-      break;
-  }
-
-  puts( "TA1 - rtems_task_resume - on Task 2" );
-  status = rtems_task_resume( Task_id[ 2 ] );
-  directive_failed( status, "rtems_task_resume of TA2" );
-
-  puts( "TA1 - rtems_task_resume - on Task 3" );
-  status = rtems_task_resume( Task_id[ 3 ] );
-  directive_failed( status, "rtems_task_resume of TA3" );
-
-  while ( FOREVER ) {
-    if ( Run_count[ 1 ] == 3 ) {
-      puts( "TA1 - rtems_task_mode - change mode to NO RTEMS_PREEMPT" );
-
-      status = rtems_task_mode(
-        RTEMS_NO_PREEMPT,
-        RTEMS_PREEMPT_MASK,
-        &previous_mode
-      );
-      directive_failed( status, "rtems_task_mode" );
-
-      status = rtems_clock_get( RTEMS_CLOCK_GET_TOD, &time );
-      directive_failed( status, "rtems_clock_get" );
-
-      old_seconds = time.second;
-
-      for ( seconds = 0 ; seconds < 6 ; ) {
-        status = rtems_clock_get( RTEMS_CLOCK_GET_TOD, &time );
-        directive_failed( status, "rtems_clock_get" );
-
-        if ( time.second != old_seconds ) {
-          old_seconds = time.second;
-          seconds++;
-          print_time( "TA1 - ", &time, "\n" );
-        }
-      }
-
-      puts( "TA1 - rtems_task_mode - change mode to RTEMS_PREEMPT" );
-      status = rtems_task_mode(
-        RTEMS_PREEMPT,
-        RTEMS_PREEMPT_MASK,
-        &previous_mode
-      );
-      directive_failed( status, "rtems_task_mode" );
-
-      while ( FOREVER );
-    }
-  }
-}
Index: src/tests/libtests/cpuuse/task2.c
===================================================================
--- c/src/tests/libtests/cpuuse/task2.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,47 +1,0 @@
-/*  Task_2
- *
- *  This routine serves as a test task.  It is just a CPU bound task
- *  requiring timesliced operation.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-
-#include <rtems/cpuuse.h>
-
-static void
-showTaskSwitches (void)
-{
-  int i;
-  int switches = taskSwitchLogIndex;
-
-  for (i = 0 ; i < switches ; i++) {
-      put_name( Task_name[taskSwitchLog[i].taskIndex], FALSE );
-      print_time( "- ", &taskSwitchLog[i].when, "\n" );
-  }
-}
-
-rtems_task Task_2(
-  rtems_task_argument argument
-)
-{
-  while ( !testsFinished );
-
-  showTaskSwitches ();
-  CPU_usage_Dump();
-  puts( "*** END OF CPU USAGE LIBRARY TEST ***" );
-  rtems_test_exit( 0 );
-}
Index: src/tests/libtests/cpuuse/task3.c
===================================================================
--- c/src/tests/libtests/cpuuse/task3.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,28 +1,0 @@
-/*  Task_3
- *
- *  This routine serves as a test task.  It is just a CPU bound task
- *  requiring timesliced operation.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-
-rtems_task Task_3(
-  rtems_task_argument argument
-)
-{
-  while( FOREVER );
-}
Index: src/tests/libtests/cpuuse/tswitch.c
===================================================================
--- c/src/tests/libtests/cpuuse/tswitch.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,65 +1,0 @@
-/*  Task_switch
- *
- *  This routine is the tswitch user extension.  It determines which
- *  task is being switched to and displays a message indicating the
- *  time and date that it gained control.
- *
- *  Input parameters:
- *    unused  - pointer to currently running TCB
- *    heir    - pointer to heir TCB
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-
-struct taskSwitchLog taskSwitchLog[1000];
-int taskSwitchLogIndex;
-volatile int testsFinished;;
-
-rtems_extension Task_switch( 
-  rtems_tcb *unused,
-  rtems_tcb *heir
-)
-{
-  rtems_unsigned32  index;
-  rtems_time_of_day time;
-  rtems_status_code status;
-
-  index = task_number( heir->Object.id );
-
-  switch( index ) {
-    case 1:
-    case 2:
-    case 3:
-      Run_count[ index ] += 1;
-
-      status = rtems_clock_get( RTEMS_CLOCK_GET_TOD, &time );
-      fatal_directive_status_with_level( status, RTEMS_SUCCESSFUL,
-                                         "rtems_clock_get", 1 );
-
-      if (taskSwitchLogIndex <
-          (sizeof taskSwitchLog / sizeof taskSwitchLog[0])) {
-        taskSwitchLog[taskSwitchLogIndex].taskIndex = index;
-        taskSwitchLog[taskSwitchLogIndex].when = time;
-        taskSwitchLogIndex++;
-      }
-      if ( time.second >= 16 )
-        testsFinished = 1;
-
-      break;
-
-    case 0:
-    default:
-      break;
-  }
-}
Index: src/tests/libtests/libtests.am
===================================================================
--- c/src/tests/libtests/libtests.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,13 +1,0 @@
-## $Id$
-
-project_bspdir=$(PROJECT_ROOT)/@RTEMS_BSP@
-
-$(project_bspdir)/tests:
-	@$(mkinstalldirs) $@
-
-$(project_bspdir)/tests/$(TEST)$(LIB_VARIANT).exe: $(PGM)
-	$(INSTALL_PROGRAM) $< $@
-
-TMPINSTALL_FILES = \
-$(project_bspdir)/tests \
-$(project_bspdir)/tests/$(TEST)$(LIB_VARIANT).exe
Index: src/tests/libtests/malloctest/.cvsignore
===================================================================
--- c/src/tests/libtests/malloctest/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/malloctest/Makefile.am
===================================================================
--- c/src/tests/libtests/malloctest/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,42 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = malloctest
-
-MANAGERS = io
-
-C_FILES = init.c task1.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES = system.h
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES = scn
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/malloctest/init.c
===================================================================
--- c/src/tests/libtests/malloctest/init.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,113 +1,0 @@
-/*  Init
- *
- *  This routine is the initialization task for this test program.
- *  It is a user initialization task and has the responsibility for creating
- *  and starting the tasks that make up the test.  If the time of day
- *  clock is required for the test, it should also be set to a known
- *  value by this function.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#define TEST_INIT
-#include "system.h"
-
-rtems_task Init(
-  rtems_task_argument argument
-)
-{
-  rtems_time_of_day time;
-  rtems_status_code status;
-
-  puts( "\n\n*** MALLOC TEST ***" );
-
-  build_time( &time, 12, 31, 1988, 9, 0, 0, 0 );
-  status = rtems_clock_set( &time );
-  directive_failed( status, "rtems_clock_set" );
-
-  Task_name[ 1 ] = rtems_build_name( 'T', 'A', '1', ' ' );
-  Task_name[ 2 ] = rtems_build_name( 'T', 'A', '2', ' ' );
-  Task_name[ 3 ] = rtems_build_name( 'T', 'A', '3', ' ' );
-  Task_name[ 4 ] = rtems_build_name( 'T', 'A', '4', ' ' );
-  Task_name[ 5 ] = rtems_build_name( 'T', 'A', '5', ' ' );
-
-  status = rtems_task_create(
-     Task_name[ 1 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 1 ]
-  );
-  directive_failed( status, "rtems_task_create of TA1" );
-
-  status = rtems_task_create(
-     Task_name[ 2 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 2 ]
-  );
-  directive_failed( status, "rtems_task_create of TA2" );
-
-  status = rtems_task_create(
-     Task_name[ 3 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 3 ]
-  );
-  directive_failed( status, "rtems_task_create of TA3" );
-
-  status = rtems_task_create(
-     Task_name[ 4 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 4 ]
-  );
-  directive_failed( status, "rtems_task_create of TA4" );
-
-  status = rtems_task_create(
-     Task_name[ 5 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_FLOATING_POINT,
-     &Task_id[ 5 ]
-  );
-  directive_failed( status, "rtems_task_create of TA5" );
-
-  status = rtems_task_start( Task_id[ 1 ], Task_1_through_5, 0 );
-  directive_failed( status, "rtems_task_start of TA1" );
-
-  status = rtems_task_start( Task_id[ 2 ], Task_1_through_5, 0 );
-  directive_failed( status, "rtems_task_start of TA2" );
-
-  status = rtems_task_start( Task_id[ 3 ], Task_1_through_5, 0 );
-  directive_failed( status, "rtems_task_start of TA3" );
-
-  status = rtems_task_start( Task_id[ 4 ], Task_1_through_5, 0 );
-  directive_failed( status, "rtems_task_start of TA4" );
-
-  status = rtems_task_start( Task_id[ 5 ], Task_1_through_5, 0 );
-  directive_failed( status, "rtems_task_start of TA5" );
-
-  status = rtems_task_delete( RTEMS_SELF );
-  directive_failed( status, "rtems_task_delete of RTEMS_SELF" );
-}
Index: src/tests/libtests/malloctest/malloctest.scn
===================================================================
--- c/src/tests/libtests/malloctest/malloctest.scn	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,468 +1,0 @@
-*** MALLOC TEST ***
-TA1  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 513 bytes
-TA2  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 513 bytes
-TA3  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 513 bytes
-TA4  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 513 bytes
-TA5  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 513 bytes
-TA1  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 175 bytes
-TA2  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 175 bytes
-TA1  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 308 bytes
-TA3  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 175 bytes
-TA1  - rtems_clock_get - 09:00:00   12/31/1988
-mallocing 534 bytes
-TA2  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 308 bytes
-TA4  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 175 bytes
-TA1  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 947 bytes
-TA5  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 175 bytes
-TA1  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 171 bytes
-TA2  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 534 bytes
-TA3  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 308 bytes
-TA1  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 702 bytes
-TA1  - rtems_clock_get - 09:00:01   12/31/1988
-mallocing 226 bytes
-TA2  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 947 bytes
-TA4  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 308 bytes
-TA1  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 494 bytes
-TA3  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 534 bytes
-TA1  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 124 bytes
-TA2  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 171 bytes
-TA5  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 308 bytes
-TA1  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 83 bytes
-TA1  - rtems_clock_get - 09:00:02   12/31/1988
-mallocing 389 bytes
-TA2  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 702 bytes
-TA4  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 534 bytes
-TA3  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 947 bytes
-TA1  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 277 bytes
-TA1  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 368 bytes
-TA2  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 226 bytes
-TA1  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 983 bytes
-TA5  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 534 bytes
-TA3  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 171 bytes
-TA1  - rtems_clock_get - 09:00:03   12/31/1988
-mallocing 535 bytes
-TA2  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 494 bytes
-TA4  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 947 bytes
-TA1  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 765 bytes
-TA1  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 646 bytes
-TA2  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 124 bytes
-TA3  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 702 bytes
-TA1  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 767 bytes
-TA1  - rtems_clock_get - 09:00:04   12/31/1988
-mallocing 780 bytes
-TA2  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 83 bytes
-TA4  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 171 bytes
-TA5  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 947 bytes
-TA1  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 822 bytes
-TA3  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 226 bytes
-TA1  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 151 bytes
-TA2  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 389 bytes
-TA1  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 625 bytes
-TA1  - rtems_clock_get - 09:00:05   12/31/1988
-mallocing 314 bytes
-TA2  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 277 bytes
-TA4  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 702 bytes
-TA3  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 494 bytes
-TA1  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 346 bytes
-TA5  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 171 bytes
-TA1  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 917 bytes
-TA2  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 368 bytes
-TA1  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 519 bytes
-TA3  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 124 bytes
-TA1  - rtems_clock_get - 09:00:06   12/31/1988
-mallocing 401 bytes
-TA2  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 983 bytes
-TA4  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 226 bytes
-TA1  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 606 bytes
-TA1  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 785 bytes
-TA2  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 535 bytes
-TA5  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 702 bytes
-TA3  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 83 bytes
-TA1  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 931 bytes
-TA1  - rtems_clock_get - 09:00:07   12/31/1988
-mallocing 869 bytes
-TA2  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 765 bytes
-TA4  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 494 bytes
-TA1  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 866 bytes
-TA3  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 389 bytes
-TA1  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 674 bytes
-TA2  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 646 bytes
-TA1  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 758 bytes
-TA5  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 226 bytes
-TA1  - rtems_clock_get - 09:00:08   12/31/1988
-mallocing 581 bytes
-TA2  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 767 bytes
-TA4  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 124 bytes
-TA3  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 277 bytes
-TA1  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 389 bytes
-TA1  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 355 bytes
-TA2  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 780 bytes
-TA1  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 200 bytes
-TA3  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 368 bytes
-TA1  - rtems_clock_get - 09:00:09   12/31/1988
-mallocing 826 bytes
-TA2  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 822 bytes
-TA4  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 83 bytes
-TA5  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 494 bytes
-TA1  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 415 bytes
-TA1  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 463 bytes
-TA2  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 151 bytes
-TA3  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 983 bytes
-TA1  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 979 bytes
-TA1  - rtems_clock_get - 09:00:10   12/31/1988
-mallocing 126 bytes
-TA2  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 625 bytes
-TA4  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 389 bytes
-TA1  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 212 bytes
-TA5  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 124 bytes
-TA3  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 535 bytes
-TA1  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 958 bytes
-TA2  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 314 bytes
-TA1  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 737 bytes
-TA1  - rtems_clock_get - 09:00:11   12/31/1988
-mallocing 409 bytes
-TA2  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 346 bytes
-TA4  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 277 bytes
-TA3  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 765 bytes
-TA1  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 780 bytes
-TA1  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 757 bytes
-TA2  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 917 bytes
-TA5  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 83 bytes
-TA1  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 956 bytes
-TA3  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 646 bytes
-TA1  - rtems_clock_get - 09:00:12   12/31/1988
-mallocing 28 bytes
-TA2  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 519 bytes
-TA4  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 368 bytes
-TA1  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 318 bytes
-TA1  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 756 bytes
-TA2  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 401 bytes
-TA3  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 767 bytes
-TA1  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 242 bytes
-TA5  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 389 bytes
-TA1  - rtems_clock_get - 09:00:13   12/31/1988
-mallocing 589 bytes
-TA2  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 606 bytes
-TA4  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 983 bytes
-TA1  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 43 bytes
-TA3  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 780 bytes
-TA1  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 956 bytes
-TA2  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 785 bytes
-TA1  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 319 bytes
-TA1  - rtems_clock_get - 09:00:14   12/31/1988
-mallocing 59 bytes
-TA2  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 931 bytes
-TA4  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 535 bytes
-TA5  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 277 bytes
-TA3  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 822 bytes
-TA1  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 441 bytes
-TA1  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 915 bytes
-TA2  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 869 bytes
-TA1  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 572 bytes
-TA3  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 151 bytes
-TA1  - rtems_clock_get - 09:00:15   12/31/1988
-mallocing 118 bytes
-TA2  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 866 bytes
-TA4  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 765 bytes
-TA1  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 569 bytes
-TA5  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 368 bytes
-TA1  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 252 bytes
-TA2  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 674 bytes
-TA3  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 625 bytes
-TA1  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 495 bytes
-TA1  - rtems_clock_get - 09:00:16   12/31/1988
-mallocing 236 bytes
-TA2  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 758 bytes
-TA4  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 646 bytes
-TA1  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 476 bytes
-TA3  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 314 bytes
-TA1  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 406 bytes
-TA2  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 581 bytes
-TA5  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 983 bytes
-TA1  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 872 bytes
-TA1  - rtems_clock_get - 09:00:17   12/31/1988
-mallocing 426 bytes
-TA2  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 389 bytes
-TA4  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 767 bytes
-TA3  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 346 bytes
-TA1  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 358 bytes
-TA1  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 381 bytes
-TA2  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 355 bytes
-TA1  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 43 bytes
-TA5  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 535 bytes
-TA3  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 917 bytes
-TA1  - rtems_clock_get - 09:00:18   12/31/1988
-mallocing 160 bytes
-TA2  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 200 bytes
-TA4  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 780 bytes
-TA1  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 522 bytes
-TA1  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 696 bytes
-TA2  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 826 bytes
-TA3  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 519 bytes
-TA1  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 97 bytes
-TA1  - rtems_clock_get - 09:00:19   12/31/1988
-mallocing 400 bytes
-TA2  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 415 bytes
-TA4  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 822 bytes
-TA5  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 765 bytes
-TA1  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 773 bytes
-TA3  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 401 bytes
-TA1  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 244 bytes
-TA2  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 463 bytes
-TA1  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 342 bytes
-TA1  - rtems_clock_get - 09:00:20   12/31/1988
-mallocing 229 bytes
-TA2  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 979 bytes
-TA4  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 151 bytes
-TA3  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 606 bytes
-TA1  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 297 bytes
-TA5  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 646 bytes
-TA1  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 304 bytes
-TA2  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 126 bytes
-TA1  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 887 bytes
-TA3  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 785 bytes
-TA1  - rtems_clock_get - 09:00:21   12/31/1988
-mallocing 36 bytes
-TA2  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 212 bytes
-TA4  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 625 bytes
-TA1  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 651 bytes
-TA1  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 398 bytes
-TA2  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 958 bytes
-TA5  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 767 bytes
-TA3  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 931 bytes
-TA1  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 676 bytes
-TA1  - rtems_clock_get - 09:00:22   12/31/1988
-mallocing 732 bytes
-TA2  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 737 bytes
-TA4  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 314 bytes
-TA1  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 937 bytes
-TA3  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 869 bytes
-TA1  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 233 bytes
-TA2  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 409 bytes
-TA1  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 838 bytes
-TA5  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 780 bytes
-TA1  - rtems_clock_get - 09:00:23   12/31/1988
-mallocing 967 bytes
-TA2  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 780 bytes
-TA4  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 346 bytes
-TA3  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 866 bytes
-TA1  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 778 bytes
-TA1  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 431 bytes
-TA2  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 757 bytes
-TA1  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 674 bytes
-TA3  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 674 bytes
-TA1  - rtems_clock_get - 09:00:24   12/31/1988
-mallocing 809 bytes
-TA2  - rtems_clock_get - 09:00:25   12/31/1988
-mallocing 956 bytes
-TA4  - rtems_clock_get - 09:00:25   12/31/1988
-mallocing 917 bytes
-TA5  - rtems_clock_get - 09:00:25   12/31/1988
-mallocing 822 bytes
-TA1  - rtems_clock_get - 09:00:25   12/31/1988
-mallocing 158 bytes
-*** END OF MALLOC TEST ***
Index: src/tests/libtests/malloctest/system.h
===================================================================
--- c/src/tests/libtests/malloctest/system.h	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,51 +1,0 @@
-/*  system.h
- *
- *  This include file contains information that is included in every
- *  function in the test set.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <tmacros.h>
-
-/* macros */
-
-/* functions */
-
-rtems_task Init(
-  rtems_task_argument argument
-);
-
-rtems_task Task_1_through_5(
-  rtems_task_argument argument
-);
-
-void blow_stack( void );
-
-/* configuration information */
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define TASK_STACK_SIZE (RTEMS_MINIMUM_STACK_SIZE*3)
-
-#define CONFIGURE_EXTRA_TASK_STACKS  ((RTEMS_MINIMUM_STACK_SIZE*2)*5)
-#define CONFIGURE_MAXIMUM_TASKS               6
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#include <confdefs.h>
-
-/* global variables */
-
-TEST_EXTERN rtems_id   Task_id[ 6 ];         /* array of task ids */
-TEST_EXTERN rtems_name Task_name[ 6 ];       /* array of task names */
-
-/* end of include file */
Index: src/tests/libtests/malloctest/task1.c
===================================================================
--- c/src/tests/libtests/malloctest/task1.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,72 +1,0 @@
-/*  task1.c
- *
- *  This set of three tasks do some simple task switching for about
- *  15 seconds and then call a routine to "blow the stack".
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-#include <rtems/libcsupport.h>    /* for malloc_dump, malloc_walk */
-#include <string.h>         /* for memset */
-#include <stdlib.h>
-
-#define NUM_PASSES 100
-
-rtems_task Task_1_through_5(
-  rtems_task_argument argument
-)
-{
-  int i;
-  unsigned int passes = 0;
-  rtems_id          tid;
-  rtems_time_of_day time;
-  rtems_status_code status;
-  unsigned char *mem_ptr;
-  int mem_amt;
-
-  status = rtems_task_ident( RTEMS_SELF, RTEMS_SEARCH_ALL_NODES, &tid );
-  directive_failed( status, "rtems_task_ident" );
-
-  while (TRUE)
-  {
-    if ( passes++ > NUM_PASSES ) {
-	puts("*** END OF MALLOC TEST ***");
-        rtems_test_exit(0);
-    }
-
-    status = rtems_clock_get( RTEMS_CLOCK_GET_TOD, &time );
-    directive_failed( status, "rtems_clock_get" );
-
-    put_name( Task_name[ task_number( tid ) ], FALSE );
-    print_time( " - rtems_clock_get - ", &time, "\n" );
-
-    mem_amt = ((int)((float)rand()*1000.0/(float)RAND_MAX));
-    while (!(mem_ptr = malloc ( mem_amt))) {
-	printf("out of memory... trying again.\n");
-	mem_amt = ((int)((float)rand()*1000.0/(float)RAND_MAX));
-    }
-    printf("mallocing %d bytes\n",mem_amt);
-    memset( mem_ptr, mem_amt, mem_amt );
-    malloc_dump();
-    malloc_walk(1,FALSE);
-    status = rtems_task_wake_after( task_number( tid ) * 1 * TICKS_PER_SECOND/4 );
-    for (i=0; i < mem_amt; i++)
-    {
-       if ( mem_ptr[i] != (mem_amt & 0xff))
-       {
-          printf("failed %d, %d, 0x%x, 0x%x\n",i,mem_amt,mem_ptr[i],mem_amt&0xff);
-          rtems_test_exit(1);
-       }
-    }
-    directive_failed( status, "rtems_task_wake_after" );
-    free( mem_ptr );
-  }
-}
Index: src/tests/libtests/monitor/.cvsignore
===================================================================
--- c/src/tests/libtests/monitor/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/monitor/Makefile.am
===================================================================
--- c/src/tests/libtests/monitor/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,43 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = monitor
-
-MANAGERS = dpmem event io msg mp part region sem signal timer rate_monotonic \
-    ext
-
-C_FILES = init.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES = system.h
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES = scn
-DOCS = #$(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/monitor/init.c
===================================================================
--- c/src/tests/libtests/monitor/init.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,73 +1,0 @@
-/*
- *  This is a simple test whose only purpose is to start the Monitor
- *  task.  The Monitor task can be used to obtain information about
- *  a variety of RTEMS objects.  
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#define TEST_INIT
-#include "system.h"
-
-#include <rtems/monitor.h>
-
-rtems_task_priority Priorities[6] = { 0,   1,   1,   3,   4,   5 };
-
-rtems_task Task_1_through_5(
-  rtems_unsigned32 argument
-)
-{
-  rtems_status_code status;
-
-  for ( ; ; ) {
-    status = rtems_task_wake_after( 100 );
-    directive_failed( status, "rtems_task_wake_after" );
-  }
-}
-
-
-
-rtems_task Init(
-  rtems_task_argument argument
-)
-{
-  rtems_unsigned32  index;
-  rtems_status_code status;
-
-  puts( "\n\n*** MONITOR TASK TEST ***" );
-
-  Task_name[ 1 ] =  rtems_build_name( 'T', 'A', '1', ' ' );
-  Task_name[ 2 ] =  rtems_build_name( 'T', 'A', '2', ' ' );
-  Task_name[ 3 ] =  rtems_build_name( 'T', 'A', '3', ' ' );
-  Task_name[ 4 ] =  rtems_build_name( 'T', 'A', '4', ' ' );
-  Task_name[ 5 ] =  rtems_build_name( 'T', 'A', '5', ' ' );
-
-  for ( index = 1 ; index <= 5 ; index++ ) {
-    status = rtems_task_create(
-      Task_name[ index ],
-      Priorities[ index ],
-      RTEMS_MINIMUM_STACK_SIZE * 4,
-      RTEMS_DEFAULT_MODES,
-      (index == 5) ? RTEMS_FLOATING_POINT : RTEMS_DEFAULT_ATTRIBUTES,
-      &Task_id[ index ]
-    );
-    directive_failed( status, "rtems_task_create loop" );
-  }
-
-  for ( index = 1 ; index <= 5 ; index++ ) {
-    status = rtems_task_start( Task_id[ index ], Task_1_through_5, index );
-    directive_failed( status, "rtems_task_start loop" );
-  }
-
-  rtems_monitor_init( 0 );
-
-  status = rtems_task_delete( RTEMS_SELF );
-  directive_failed( status, "rtems_task_delete of RTEMS_SELF" );
-}
Index: src/tests/libtests/monitor/system.h
===================================================================
--- c/src/tests/libtests/monitor/system.h	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,59 +1,0 @@
-/*  system.h
- *
- *  This include file contains information that is included in every
- *  function in the test set.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <tmacros.h>
-
-/* types */
-
-struct counters {
-  rtems_unsigned32 count[6];
-};
-
-/* functions */
-
-rtems_task Init(
-  rtems_task_argument argument
-);
- 
-rtems_task Task_1_through_5(
-  rtems_task_argument argument
-);
- 
-void Get_all_counters( void );
- 
-/* configuration information */
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define CONFIGURE_MAXIMUM_TASKS               7
-#define CONFIGURE_MAXIMUM_PERIODS             10
-
-#define CONFIGURE_INIT_TASK_PRIORITY          10
-#define CONFIGURE_INIT_TASK_INITIAL_MODES     RTEMS_DEFAULT_MODES
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#define CONFIGURE_EXTRA_TASK_STACKS \
-  (6 * (3 * RTEMS_MINIMUM_STACK_SIZE)) /* our tasks */ + \
-  (1 * RTEMS_MINIMUM_STACK_SIZE)       /* monitor tasks */
-
-#include <confdefs.h>
-
-/* global variables */
-
-TEST_EXTERN rtems_id   Task_id[ 6 ];     /* array of task ids */
-TEST_EXTERN rtems_name Task_name[ 6 ];   /* array of task names */
-
-/* end of include file */
Index: src/tests/libtests/putenvtest/.cvsignore
===================================================================
--- c/src/tests/libtests/putenvtest/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/putenvtest/Makefile.am
===================================================================
--- c/src/tests/libtests/putenvtest/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,42 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = putenvtest
-
-MANAGERS = io
-
-C_FILES = init.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES =
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES =
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/putenvtest/init.c
===================================================================
--- c/src/tests/libtests/putenvtest/init.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,61 +1,0 @@
-/*  Init
- *
- *  This routine is the initialization task for this test program.
- *  It is a user initialization task and has the responsibility for creating
- *  and starting the tasks that make up the test.  If the time of day
- *  clock is required for the test, it should also be set to a known
- *  value by this function.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#define TEST_INIT
-#include <tmacros.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-/* putenv is beyond ANSI so prototype it here */
-int putenv(const char *string);
-
-rtems_task Init(
-  rtems_task_argument argument
-);
-
-/* configuration information */
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define TASK_STACK_SIZE (RTEMS_MINIMUM_STACK_SIZE*3)
-
-#define CONFIGURE_MAXIMUM_TASKS               1
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#include <confdefs.h>
-
-rtems_task Init(
-  rtems_task_argument argument
-)
-{
-  puts( "\n\n*** PUTENV/GETENV TEST ***" );
-
-  puts( "putenv(\"FOO=BAR\") - expected to work" );
-  putenv ("FOO=BAR");
-  printf ("getenv(\"FOO\") ==> \"%s\"\n", getenv ("FOO"));
-
-  puts( "*** END OF PUTENV/GETENV TEST ***" );
-  rtems_test_exit(0);
-}
Index: src/tests/libtests/rtems++/.cvsignore
===================================================================
--- c/src/tests/libtests/rtems++/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/rtems++/Init.cc
===================================================================
--- c/src/tests/libtests/rtems++/Init.cc	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,62 +1,0 @@
-/*  Init
- *
- *  This routine is the initialization task for this test program.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1997
- *  Objective Design Systems Ltd Pty (ODS)
- *  All rights reserved (R) Objective Design Systems Ltd Pty
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#define TEST_INIT
-#include "System.h"
-
-// make global so it lasts past the Init task's stack's life time
-Task1 task_1;
-
-rtems_task Init(rtems_task_argument )
-{
-  puts( "\n\n*** RTEMS++ TEST ***" );
-
-  printf( "INIT - Task.create() - " );
-  task_1.create("TA1 ", 0, RTEMS_MINIMUM_STACK_SIZE);
-  printf("%s\n", task_1.last_status_string());
-
-  printf( "INIT - Task.create() - " );
-  task_1.create("TA1 ", 10, RTEMS_MINIMUM_STACK_SIZE * 6);
-  printf("%s\n", task_1.last_status_string());
-
-  printf( "INIT - Task.create() - " );
-  task_1.create("TA1 ", 10, RTEMS_MINIMUM_STACK_SIZE * 6);
-  printf("%s\n", task_1.last_status_string());
-
-  printf( "INIT - Task.restart() - " );
-  task_1.restart(0);
-  printf("%s\n", task_1.last_status_string());
-
-  printf( "INIT - Task.start(0xDEADDEAD) - " );
-  task_1.start(0xDEADDEAD);
-  printf("%s\n", task_1.last_status_string());
-
-  printf("INIT - Destroy it's self\n");
-
-  // needs to be in C, no C++ object owns the Init task
-  rtems_status_code status  = rtems_task_delete( RTEMS_SELF );
-  directive_failed( status, "rtems_task_delete of RTEMS_SELF" );
-}
-
-
-
Index: src/tests/libtests/rtems++/Makefile.am
===================================================================
--- c/src/tests/libtests/rtems++/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,48 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = rtems++
-
-MANAGERS = event io msg sem signal timer rate_monotonic
-
-CC_FILES = Init.cc Task1.cc Task2.cc Task3.cc
-OBJS = $(CC_FILES:%.cc=${ARCH}/%.$(OBJEXT))
-
-H_FILES = System.h
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES = scn doc
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-LD_LIBS = -lrtems++$(LIB_VARIANT)
-
-if HAS_CXX
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-cxx-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-else
-all-local:
-endif
-
-EXTRA_DIST = $(CC_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/rtems++/System.h
===================================================================
--- c/src/tests/libtests/rtems++/System.h	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,135 +1,0 @@
-/*  system.h
- *
- *  This include file contains information that is included in every
- *  function in the test set.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <tmacros.h>
-#include <rtems++/rtemsEvent.h>
-#include <rtems++/rtemsMessageQueue.h>
-#include <rtems++/rtemsTask.h>
-#include <rtems++/rtemsTaskMode.h>
-
-/* functions */
-
-extern "C"
-{  
-  rtems_task Init(
-    rtems_task_argument argument
-    );
-}
-
-rtems_timer_service_routine Delayed_routine(
-  rtems_id  ignored_id,
-  void     *ignored_address
-);
-
-class Task1
-  : public rtemsTask
-{
-  void print_mode(rtems_mode mode, rtems_mode mask);
-  
-  void screen1(void);
-  void screen2(void);
-  void screen3(void);
-  void screen4(void);
-  void screen5(void);
-  void screen6(void);
-
-protected:
-  virtual void body(rtems_task_argument argument);
-
-public:
-};
-
-class Task2
-  : public rtemsTask
-{
-  void screen4(void);
-
-protected:
-  virtual void body(rtems_task_argument argument);
-
-public:  
-  Task2(const char* name,
-        const rtems_task_priority initial_priority,
-        const rtems_unsigned32 stack_size);
-};
-
-class Task3
-  : public rtemsTask
-{
-  void screen6(void);
-
-protected:
-  virtual void body(rtems_task_argument argument);
-
-public:  
-  Task3(const char* name,
-        const rtems_task_priority initial_priority,
-        const rtems_unsigned32 stack_size);
-};
-
-class EndTask
-  : public rtemsTask
-{
-protected:
-  virtual void body(rtems_task_argument argument);
-
-public:  
-  EndTask(const char* name,
-          const rtems_task_priority initial_priority,
-          const rtems_unsigned32 stack_size);
-};
-
-#if 0
-
-//
-// Not sure this can be tested in a generic manner, any ideas anyone !!
-//
-
-class Service_routine
-  : public rtemsInterrupt
-{
-};
-
-class Io_during_interrupt
-  : pubic rtemsTimer
-{
-
-};
-
-#endif
-
-/* configuration information */
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define CONFIGURE_MAXIMUM_TASKS               8
-#define CONFIGURE_MAXIMUM_TIMERS              1
-#define CONFIGURE_MAXIMUM_SEMAPHORES          2
-#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES      1
-#define CONFIGURE_MAXIMUM_PARTITIONS          1
-#define CONFIGURE_MAXIMUM_REGIONS             1
-#define CONFIGURE_MAXIMUM_PERIODS             1
-#define CONFIGURE_MAXIMUM_USER_EXTENSIONS     0
-#define CONFIGURE_TICKS_PER_TIMESLICE       100
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-#define CONFIGURE_INIT_TASK_STACK_SIZE      (4 * RTEMS_MINIMUM_STACK_SIZE) 
-
-#define CONFIGURE_EXTRA_TASK_STACKS         (3 * RTEMS_MINIMUM_STACK_SIZE)
-
-#include <confdefs.h>
-
-/* end of include file */
Index: src/tests/libtests/rtems++/Task1.cc
===================================================================
--- c/src/tests/libtests/rtems++/Task1.cc	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,681 +1,0 @@
-/*  Task1
- *
- *  This task is the main line for the test. It creates other
- *  tasks which can create
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1997
- *  Objective Design Systems Ltd Pty (ODS)
- *  All rights reserved (R) Objective Design Systems Ltd Pty
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include "System.h"
-
-void Task1::body(rtems_task_argument argument)
-{
-  rtems_test_pause_and_screen_number(1);
-  
-  printf(" * START Task Class test *\n");
-  
-  printf("%s - test argument - ", name_string());
-  if (argument != 0xDEADDEAD)
-    printf("argument is not 0xDEADDEAD\n");
-  else
-    printf("argument matched\n");
-  
-  screen1();
-  rtems_test_pause_and_screen_number(2);
-
-  screen2();
-  rtems_test_pause_and_screen_number(3);
-  
-  screen3();
-  rtems_test_pause_and_screen_number(4);
-  
-  screen4();
-  rtems_test_pause_and_screen_number(5);
-  
-  screen5();
-  rtems_test_pause_and_screen_number(6);
-  
-  screen6();
-
-  // do not call exit(0) from this thread as this object is static
-  // the static destructor call delete the task which is calling exit
-  // so exit never completes
-  
-  EndTask end_task("ENDT", (rtems_task_priority) 1, RTEMS_MINIMUM_STACK_SIZE * 6);
-  end_task.start(0);
-
-  rtemsEvent block_me;
-  rtems_event_set out;
-  
-  block_me.receive(RTEMS_SIGNAL_0, out);
-
-  printf("**** TASK 1 did not block ????\n");
-}
-
-void Task1::screen1(void)
-{
-  // create two local task objects to connect to this task
-  rtemsTask local_task_1 = *this;
-  rtemsTask local_task_2;
-
-  local_task_2 = *this;
-  
-  // check the copy constructor works
-  printf("%s - copy constructor - ", name_string());
-  if (local_task_1.id_is() == id_is())
-    printf("local and this id's match\n");
-  else
-    printf("local and this id's do not match\n");
-
-  printf("%s - copy constructor - ", name_string());
-  if (local_task_1.name_is() == name_is())
-    printf("local and this name's match\n");
-  else
-    printf("local and this name's do not match\n");
-
-  // check the copy operator works
-  printf("%s - copy operator - ", name_string());
-  if (local_task_2.id_is() == id_is())
-    printf("local and this id's match\n");
-  else
-    printf("local and this id's do not match\n");
-  printf("%s - copy operator - ", name_string());
-  if (local_task_2.name_is() == name_is())
-    printf("local and this name's match\n");
-  else
-    printf("local and this name's do not match\n");
-  
-  // check that the owner of the id cannot delete this task
-  printf("%s - not owner destroy's task - ", local_task_1.name_string());
-  local_task_1.destroy();
-  printf("%s\n", local_task_1.last_status_string());
-  
-  // connect to a valid task
-  printf("%s - connect to a local valid task name - ", local_task_2.name_string());
-  local_task_2.connect("TA1 ", RTEMS_SEARCH_ALL_NODES);
-  printf("%s\n", local_task_2.last_status_string());
-  
-  // connect to an invalid task
-  printf("%s - connect to an invalid task name - ", local_task_2.name_string());
-  local_task_2.connect("BADT", RTEMS_SEARCH_ALL_NODES);
-  printf("%s\n", local_task_2.last_status_string());
-  
-  // connect to a task an invalid node
-  printf("%s - connect to a task on an invalid node - ", local_task_2.name_string());
-  local_task_2.connect("BADT", 10);
-  printf("%s\n", local_task_2.last_status_string());
-  
-  // restart this task
-  printf("%s - restart from a non-owner - ", name_string());
-  local_task_1.restart(0);
-  printf("%s\n", local_task_1.last_status_string());
-}
-
-void Task1::screen2(void)
-{
-  // wake after using this object
-  
-  printf("%s - wake after 0 secs - ", name_string());
-  wake_after(0);
-  printf("%s\n", last_status_string());
-  
-  printf("%s - wake after 500 msecs - ", name_string());
-  wake_after(500000);
-  printf("%s\n", last_status_string());
-  
-  printf("%s - wake after 5 secs - ", name_string());
-  wake_after(5000000);
-  printf("%s\n", last_status_string());
-
-  printf("%s - wake when - to do\n", name_string());
-
-  rtemsTask task_1 = *this;
-  
-  // wake after using a connected object
-  
-  printf("%s - connected object wake after 0 secs - ", task_1.name_string());
-  task_1.wake_after(0);
-  printf("%s\n", task_1.last_status_string());
-  
-  printf("%s - connected object wake after 500 msecs - ", task_1.name_string());
-  task_1.wake_after(500000);
-  printf("%s\n", task_1.last_status_string());
-  
-  printf("%s - connected object wake after 5 secs - ", task_1.name_string());
-  task_1.wake_after(5000000);
-  printf("%s\n", task_1.last_status_string());
-
-  printf("%s - connected object wake when - to do\n", task_1.name_string());
-
-  rtemsTask task_2;
-  
-  // wake after using a self object
-  
-  printf("%s - self object wake after 0 secs - ", task_2.name_string());
-  task_2.wake_after(0);
-  printf("%s\n", task_2.last_status_string());
-  
-  printf("%s - self object wake after 500 msecs - ", task_2.name_string());
-  task_2.wake_after(500000);
-  printf("%s\n", task_2.last_status_string());
-  
-  printf("%s - self object wake after 5 secs - ", task_2.name_string());
-  task_2.wake_after(5000000);
-  printf("%s\n", task_2.last_status_string());
-
-  printf("%s - self object wake when - to do\n", task_2.name_string());
-
-  rtems_task_priority current_priority;
-  rtems_task_priority priority;
-
-  // priorities with this object
-  
-  printf("%s - get priority - ", name_string());
-  get_priority(current_priority);
-  printf("%s, priority is %i\n", last_status_string(), current_priority);
-
-  printf("%s - set priority to 512 - ", name_string());
-  set_priority(512);
-  printf("%s\n", last_status_string());
-
-  printf("%s - set priority to 25 - ", name_string());
-  set_priority(25);
-  printf("%s\n", last_status_string());
-
-  printf("%s - set priority to original - ", name_string());
-  set_priority(current_priority, priority);
-  printf("%s, priority was %i\n", last_status_string(), priority);
-
-  // priorities with connected object
-    
-  printf("%s - connected object get priority - ", task_1.name_string());
-  task_1.get_priority(current_priority);
-  printf("%s, priority is %i\n", task_1.last_status_string(), current_priority);
-
-  printf("%s - connected object set priority to 512 - ", task_1.name_string());
-  task_1.set_priority(512);
-  printf("%s\n", task_1.last_status_string());
-
-  printf("%s - connected object set priority to 25 - ", task_1.name_string());
-  task_1.set_priority(25);
-  printf("%s\n", task_1.last_status_string());
-
-  printf("%s - connected object set priority to original - ", task_1.name_string());
-  task_1.set_priority(current_priority, priority);
-  printf("%s, priority was %i\n", task_1.last_status_string(), priority);  
-
-  // priorities with self object
-    
-  printf("%s - self object get priority - ", task_2.name_string());
-  task_2.get_priority(current_priority);
-  printf("%s, priority is %i\n", task_2.last_status_string(), current_priority);
-
-  printf("%s - self object set priority to 512 - ", task_2.name_string());
-  task_2.set_priority(512);
-  printf("%s\n", task_2.last_status_string());
-
-  printf("%s - self object set priority to 25 - ", task_2.name_string());
-  task_2.set_priority(25);
-  printf("%s\n", task_2.last_status_string());
-
-  printf("%s - self object set priority to original - ", task_2.name_string());
-  task_2.set_priority(current_priority, priority);
-  printf("%s, priority was %i\n", task_2.last_status_string(), priority);
-
-  rtems_unsigned32 current_note;
-  rtems_unsigned32 note;
-  
-  // notepad registers for this object
-
-  printf("%s - get note - ", name_string());
-  get_note(0, current_note);
-  printf("%s, note is %i\n", last_status_string(), current_note);
-
-  printf("%s - get with bad notepad number - ", name_string());
-  get_note(100, current_note);
-  printf("%s, note is %i\n", last_status_string(), current_note);
-
-  printf("%s - set note to 0xDEADBEEF - ", name_string());
-  set_note(0, 0xDEADBEEF);
-  printf("%s\n", last_status_string());
-
-  printf("%s - get note - ", name_string());
-  get_note(0, note);
-  printf("%s, note is 0x%08X\n", last_status_string(), note);
-
-  printf("%s - set note to original value - ", name_string());
-  set_note(0, current_note);
-  printf("%s\n", last_status_string());
-
-  // notepad registers for connected object
-
-  printf("%s - connected object get note - ", task_1.name_string());
-  task_1.get_note(0, current_note);
-  printf("%s, notepad is %i\n", task_1.last_status_string(), current_note);
-
-  printf("%s - connected object get with bad notepad number - ", task_1.name_string());
-  task_1.get_note(100, current_note);
-  printf("%s, note is %i\n", task_1.last_status_string(), current_note);
-
-  printf("%s - connected object set note to 0xDEADBEEF - ", task_1.name_string());
-  task_1.set_note(0, 0xDEADBEEF);
-  printf("%s\n", task_1.last_status_string());
-
-  printf("%s - connected object get note - ", task_1.name_string());
-  task_1.get_note(0, note);
-  printf("%s, note is 0x%08X\n", task_1.last_status_string(), note);
-
-  printf("%s - connected object set note to original value - ", task_1.name_string());
-  task_1.set_note(0, current_note);
-  printf("%s\n", task_1.last_status_string());
-
-  // notepad registers for self object
-
-  printf("%s - self object get note - ", task_2.name_string());
-  task_2.get_note(0, current_note);
-  printf("%s, note is %i\n", task_2.last_status_string(), current_note);
-
-  printf("%s - self object get with bad notepad number - ", task_2.name_string());
-  task_2.get_note(100, current_note);
-  printf("%s, note is %i\n", task_2.last_status_string(), current_note);
-
-  printf("%s - self object set note to 0xDEADBEEF - ", task_2.name_string());
-  task_2.set_note(0, 0xDEADBEEF);
-  printf("%s\n", task_2.last_status_string());
-
-  printf("%s - self object get note - ", task_2.name_string());
-  task_2.get_note(0, note);
-  printf("%s, notepad is 0x%08X\n", task_2.last_status_string(), note);
-
-  printf("%s - self object set note to original value - ", task_2.name_string());
-  task_2.set_note(0, current_note);
-  printf("%s\n", task_2.last_status_string());
-
-  printf(" * END Task Class test *\n");
-}
-
-#define RTEMS_ALL_MODES (RTEMS_PREEMPT_MASK | \
-                         RTEMS_TIMESLICE_MASK | \
-                         RTEMS_ASR_MASK | \
-                         RTEMS_INTERRUPT_MASK)
-
-void Task1::screen3(void)
-{
-  printf(" * START TaskMode Class test *\n");
-
-  rtemsTask self;
-  rtemsTaskMode task_mode;
-  rtems_mode current_mode;
-  rtems_mode mode;
-
-  printf("%s - get mode - ", self.name_string());
-  task_mode.get_mode(current_mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), current_mode);
-  print_mode(current_mode, RTEMS_ALL_MODES);
-  printf("\n");
-
-  // PREEMPTION mode control
-  
-  printf("%s - get preemption state - ", self.name_string());
-  task_mode.get_preemption_state(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_PREEMPT_MASK);
-  printf("\n");
-  
-  printf("%s - set preemption state to RTEMS_PREEMPT - ", self.name_string());
-  task_mode.set_preemption_state(RTEMS_PREEMPT);
-  task_mode.get_mode(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ALL_MODES);
-  printf("\n");
-  
-  printf("%s - set preemption state to RTEMS_NO_PREEMPT - ", self.name_string());
-  task_mode.set_preemption_state(RTEMS_NO_PREEMPT);
-  task_mode.get_mode(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ALL_MODES);
-  printf("\n");
-
-  // TIMESLICE mode control
-  
-  printf("%s - get timeslice state - ", self.name_string());
-  task_mode.get_timeslice_state(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_TIMESLICE_MASK);
-  printf("\n");
-  
-  printf("%s - set timeslice state to RTEMS_TIMESLICE - ", self.name_string());
-  task_mode.set_timeslice_state(RTEMS_TIMESLICE);
-  task_mode.get_mode(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ALL_MODES);
-  printf("\n");
-  
-  printf("%s - set timeslice state to RTEMS_NO_TIMESLICE - ", self.name_string());
-  task_mode.set_timeslice_state(RTEMS_NO_TIMESLICE);
-  task_mode.get_mode(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ALL_MODES);
-  printf("\n");
-
-  // ASR mode control
-  
-  printf("%s - get asr state - ", self.name_string());
-  task_mode.get_asr_state(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ASR_MASK);
-  printf("\n");
-  
-  printf("%s - set asr state to RTEMS_ASR - ", self.name_string());
-  task_mode.set_asr_state(RTEMS_ASR);
-  task_mode.get_mode(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ALL_MODES);
-  printf("\n");
-  
-  printf("%s - set asr state to RTEMS_NO_ASR - ", self.name_string());
-  task_mode.set_asr_state(RTEMS_NO_ASR);
-  task_mode.get_mode(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ALL_MODES);
-  printf("\n");
-
-  // interrupt level control
-  
-  rtems_interrupt_level current_level;
-  rtems_interrupt_level level;
-
-  printf("%s - get current interrupt level - ", self.name_string());
-  task_mode.get_interrupt_level(current_level);
-  printf("%s, level is %i\n", task_mode.last_status_string(), current_level);
-
-  printf("%s - set interrupt level to 102 - ", self.name_string());
-  task_mode.set_interrupt_level(102);
-  printf("%s\n", task_mode.last_status_string());
-  
-  printf("%s - set interrupt level to original level - ", self.name_string());
-  task_mode.set_interrupt_level(current_level, level);
-  printf("%s, level was %i\n", task_mode.last_status_string(), level);
-
-  printf("%s - set mode to original mode - ", self.name_string());
-  task_mode.set_mode(current_mode,
-                     RTEMS_PREEMPT_MASK | RTEMS_TIMESLICE_MASK |
-                     RTEMS_ASR_MASK | RTEMS_INTERRUPT_MASK);
-  task_mode.get_mode(mode);
-  printf("%s,\n\t mode is 0x%08X, ", task_mode.last_status_string(), mode);
-  print_mode(mode, RTEMS_ALL_MODES);
-  printf("\n");
-  
-  printf(" * END TaskMode Class test *\n");  
-}
-
-void Task1::screen4(void)
-{
-  printf(" * START Event Class test *\n");
-
-  printf("%s - create task 2 - ", name_string());
-  Task2 task_2("TA2", (rtems_task_priority) 9, RTEMS_MINIMUM_STACK_SIZE * 6);
-  printf("%s\n", task_2.last_status_string());
-
-  printf("%s - start task 2 - ", name_string());
-  task_2.start(0);
-  printf("%s\n", task_2.last_status_string());
-  
-  printf("%s - construct event connecting to task 2 - ", name_string());
-  rtemsEvent event_2("TA2 ");
-  printf("%s\n", event_2.last_status_string());
-
-  // wait for task 2 to complete its timeout tests
-  wake_after(7000000);
-
-  printf("%s - send event signal 0 using the task id - ", name_string());
-  event_2.send(task_2.id_is(), RTEMS_SIGNAL_0);
-  printf("%s\n", event_2.last_status_string());
-  
-  wake_after(1000000);
-
-  printf("%s - send event signal 0 using the task object reference - ", name_string());
-  event_2.send(task_2, RTEMS_SIGNAL_0);
-  printf("%s\n", event_2.last_status_string());
-  
-  wake_after(1000000);
-
-  printf("%s - send event signal 31 using connected id - ", name_string());
-  event_2.send(RTEMS_SIGNAL_31);
-  printf("%s\n", event_2.last_status_string());
-  
-  wake_after(1000000);
-
-  rtemsEvent event_2_2;
-
-  event_2_2.connect("TA2");
-  
-  printf("%s - send event signal 0 and 31 - ", name_string());
-  event_2_2.send(task_2, RTEMS_SIGNAL_0 | RTEMS_SIGNAL_31);
-  printf("%s\n", event_2_2.last_status_string());
-  
-  printf("%s - waiting 5 secs for TA2 to finish\n", name_string());
-  wake_after(500000);
-  
-  printf(" * END Event Class test *\n");  
-}
-
-void Task1::screen5(void)
-{
-  printf(" * START Interrupt Class test *\n");
-
-  printf(" do not know a portable BSP type interrupt test\n");
-
-  printf(" * END Interrupt Class test *\n");  
-}
-
-void Task1::screen6(void)
-{
-  printf(" * START MessageQueue Class test *\n");
-
-  printf("%s - construct message queue 1 with no memory error - ", name_string());
-  rtemsMessageQueue mq_1("MQ1", 1000000, 1000);
-  printf("%s\n", mq_1.last_status_string());
-
-  printf("%s - construct/create message queue 2 - ", name_string());
-  rtemsMessageQueue mq_2("MQ2", 4, 50);
-  printf("%s\n", mq_2.last_status_string());
-
-  char *u1 = "normal send";
-  char *u2 = "urgent send";
-  char in[100];
-  rtems_unsigned32 size;
-  
-  printf("%s - send u1 to mq_2 - ", name_string());
-  mq_2.send(u1, strlen(u1) + 1);
-  printf("%s\n", mq_2.last_status_string());
-  
-  printf("%s - urgent send u2 to mq_2 - ", name_string());
-  mq_2.urgent(u2, strlen(u2) + 1);
-  printf("%s\n", mq_2.last_status_string());
-  
-  printf("%s - create task 3_1 - ", name_string());
-  Task3 task_3_1("TA31", 9, RTEMS_MINIMUM_STACK_SIZE * 6);
-  printf("%s\n", task_3_1.last_status_string());
-
-  printf("%s - start task 3_1 - ", name_string());
-  task_3_1.start(0);
-  printf("%s\n", task_3_1.last_status_string());
-  
-  printf("%s - create task 3_2 - ", name_string());
-  Task3 task_3_2("TA32", 9, RTEMS_MINIMUM_STACK_SIZE * 6);
-  printf("%s\n", task_3_2.last_status_string());
-
-  printf("%s - start task 3_2 - ", name_string());
-  task_3_2.start(0);
-  printf("%s\n", task_3_1.last_status_string());
-  
-  wake_after(1000000);
-  
-  printf("%s - receive u2 on mq_2 ...\n", name_string()); fflush(stdout);
-  mq_2.receive(in, size, 5000000);
-  printf("%s - %s\n", name_string(), mq_2.last_status_string());
-
-  if (size == (strlen(u2) + 5))
-  {
-    if ((strncmp(in, task_3_1.name_string(), 4) == 0) &&
-        (strcmp(in + 4, u2) == 0))
-    {
-      printf("%s - message u2 received correctly\n", name_string());
-    }
-    else
-    {
-      printf("%s - message u2 received incorrectly, message='%s', size=%i\n",
-             name_string(), in, size);
-    }
-  }
-  else
-    printf("%s - message u2 size incorrect, size=%i\n", name_string(), size);
-
-  printf("%s - receive u1 on mq_2 ...\n", name_string()); fflush(stdout);
-  mq_2.receive(in, size, 5000000);
-  printf("%s - %s\n", name_string(), mq_2.last_status_string());
-
-  if (size == (strlen(u1) + 5))
-  {
-    if ((strncmp(in, task_3_2.name_string(), 4) == 0) &&
-        (strcmp(in + 4, u1) == 0))
-    {
-      printf("%s - message u1 received correctly\n", name_string());
-    }
-    else
-    {
-      printf("%s - message u1 received incorrectly, message='%s', size=%i\n",
-             name_string(), in, size);
-    }
-  }
-  else
-    printf("%s - message u1 size incorrect, size=%i\n", name_string(), size);
-
-  wake_after(3000000);
-  
-  char *b1 = "broadcast message";
-  rtems_unsigned32 count;
-  
-  printf("%s - broadcast send b1 ...\n", name_string());
-  mq_2.broadcast(b1, strlen(b1) + 1, count);
-  printf("%s - mq_2 broadcast send - %s, count=%i\n",
-         name_string(), mq_2.last_status_string(), count);
-
-  wake_after(1000000);
-  
-  printf("%s - receive message b1 on mq_2 from %s...\n",
-         name_string(), task_3_1.name_string()); fflush(stdout);
-  mq_2.receive(in, size, 5000000);
-  printf("%s - %s\n", name_string(), mq_2.last_status_string());
-
-  if (size == (strlen(b1) + 5))
-  {
-    if ((strncmp(in, task_3_1.name_string(), 4) == 0) &&
-        (strcmp(in + 4, b1) == 0))
-    {
-      printf("%s - message b1 received correctly\n", name_string());
-    }
-    else
-    {
-      printf("%s - message b1 received incorrectly, message='%s'\n",
-             name_string(), in);
-    }
-  }
-  else
-    printf("%s - message b1 size incorrect, size=%i\n", name_string(), size);
-
-  printf("%s - receive message b1 on mq_2 from %s...\n",
-         name_string(), task_3_1.name_string()); fflush(stdout);
-  mq_2.receive(in, size, 5000000);
-  printf("%s - %s\n", name_string(), mq_2.last_status_string());
-
-  if (size == (strlen(b1) + 5))
-  {
-    if ((strncmp(in, task_3_2.name_string(), 4) == 0) &&
-        (strcmp(in + 4, b1) == 0))
-    {
-      printf("%s - message b1 received correctly\n", name_string());
-    }
-    else
-    {
-      printf("%s - message b1 received incorrectly, message='%s', size=%i\n",
-             name_string(), in, size);
-    }
-  }
-  else
-    printf("%s - message b1 size incorrect, size=%i\n", name_string(), size);
-
-  // wait for task 3_1, and 3_2 to complete their timeout tests, will
-  // start these after getting the broadcast message
-  wake_after(7000000);  
-
-  char *f1 = "flush message";
-  
-  printf("%s - send f1 to mq_2 - ", name_string());
-  mq_2.send(f1, strlen(f1) + 1);
-  printf("%s\n", mq_2.last_status_string());
-  
-  printf("%s - send f1 to mq_2 - ", name_string());
-  mq_2.send(f1, strlen(f1) + 1);
-  printf("%s\n", mq_2.last_status_string());
-  
-  printf("%s - send f1 to mq_2 - ", name_string());
-  mq_2.send(f1, strlen(f1) + 1);
-  printf("%s\n", mq_2.last_status_string());
-
-  printf("%s - flush mq_2 - ", name_string());
-  mq_2.flush(size);
-  printf("%s, flushed=%i\n", mq_2.last_status_string(), size);
-  
-  printf(" * END MessageQueue Class test *\n");  
-}
-
-void Task1::print_mode(rtems_mode mode, rtems_mode mask)
-{
-  rtemsTaskMode task_mode;
-  if (mask & RTEMS_PREEMPT_MASK)
-    printf("RTEMS_%sPREEMPT ",
-           task_mode.preemption_set(mode) ? "" : "NO_");
-  if (mask & RTEMS_TIMESLICE_MASK)
-    printf("RTEMS_%sTIMESLICE ",
-           task_mode.preemption_set(mode) ? "" : "NO_");
-  if (mask & RTEMS_ASR_MASK)
-    printf("RTEMS_%sASR ",
-           task_mode.asr_set(mode) ? "" : "NO_");
-  if (mask & RTEMS_INTERRUPT_MASK)
-    printf("INTMASK=%i",
-           mode & RTEMS_INTERRUPT_MASK);
-}
-
-EndTask::EndTask(const char* name,
-                 const rtems_task_priority initial_priority,
-                 const rtems_unsigned32 stack_size)
-  : rtemsTask(name, initial_priority, stack_size, RTEMS_NO_PREEMPT)
-{
-}
-  
-void EndTask::body(rtems_task_argument)
-{
- printf("*** END OF RTEMS++ TEST ***\n");
- exit(0);
-}
-
Index: src/tests/libtests/rtems++/Task2.cc
===================================================================
--- c/src/tests/libtests/rtems++/Task2.cc	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,80 +1,0 @@
-/*  Task_2
- *
- *  This routine serves as a test task.  Its only purpose is to generate the
- *  error where a semaphore is deleted while a task is waiting for it.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "System.h"
-
-Task2::Task2(const char* name,
-             const rtems_task_priority initial_priority,
-             const rtems_unsigned32 stack_size)
-  : rtemsTask(name, initial_priority, stack_size, RTEMS_NO_PREEMPT)
-{
-}
-  
-void Task2::body(rtems_task_argument )
-{
-  screen4();
-
-  printf("%s - destroy itself\n", name_string());
-  destroy();
-}
-
-void Task2::screen4()
-{
-  rtemsEvent event;
-
-  // block waiting for any event
-  rtems_event_set out;
-  
-  printf("%s - event no wait - ", name_string());
-  event.receive(RTEMS_SIGNAL_0, out, 0, rtemsEvent::no_wait);
-  printf("%s\n", event.last_status_string());
-  
-  printf("%s - event 5 secs timeout - ", name_string()); fflush(stdout);
-  event.receive(RTEMS_SIGNAL_0, out, 5000000);
-  printf("%s\n", event.last_status_string());
-
-  // send using task id
-  printf("%s - event wait forever for signal 0 from TA1 ....\n", name_string());
-  event.receive(RTEMS_SIGNAL_0, out);
-  printf("%s - %s, signals out are 0x%08X\n", name_string(), event.last_status_string(), out);
-
-  // send using task object reference
-  printf("%s - event wait forever for signal 0 from TA1 ....\n", name_string());
-  event.receive(RTEMS_SIGNAL_0, out);
-  printf("%s - %s, signals out are 0x%08X\n", name_string(), event.last_status_string(), out);
-  
-  printf("%s - event wait forever for signal 31 from TA1 ....\n", name_string());
-  event.receive(RTEMS_SIGNAL_31, out);
-  printf("%s - %s, signals out are 0x%08X\n", name_string(), event.last_status_string(), out);
-  
-  printf("%s - event wait forever for signal 0 and 31 from TA1 ....\n", name_string());
-  event.receive(RTEMS_SIGNAL_0 | RTEMS_SIGNAL_31, out, 0, rtemsEvent::wait, rtemsEvent::all);
-  printf("%s - %s, signals out are 0x%08X\n", name_string(), event.last_status_string(), out);
-
-  printf("%s - send event signal 1 - ", name_string());
-  event.send(RTEMS_SIGNAL_1);
-  printf("%s\n", event.last_status_string());
-  
-  printf("%s - event wait forever for signal 1 from TA2 - ", name_string());
-  event.receive(RTEMS_SIGNAL_1, out, 0, rtemsEvent::wait, rtemsEvent::all);
-  printf("%s, signals out are 0x%08X\n", event.last_status_string(), out);  
-}
-
-
Index: src/tests/libtests/rtems++/Task3.cc
===================================================================
--- c/src/tests/libtests/rtems++/Task3.cc	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,80 +1,0 @@
-/*  Task_3
- *
- *  This routine serves as a test task. Loopback the messages and test
- *  timeouts
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "System.h"
-
-Task3::Task3(const char* name,
-             const rtems_task_priority initial_priority,
-             const rtems_unsigned32 stack_size)
-  : rtemsTask(name, initial_priority, stack_size, RTEMS_NO_PREEMPT)
-{
-}
-  
-void Task3::body(rtems_task_argument )
-{
-  screen6();
-
-  printf("%s - destroy itself\n", name_string());
-  destroy();
-}
-
-void Task3::screen6()
-{
-  rtemsMessageQueue mq_2("MQ2");
-  printf("%s - construction connect mq_2 - %s\n", name_string(), mq_2.last_status_string());
-
-  if (mq_2.successful())
-  {
-    char in[100];
-    char out[100];
-    rtems_unsigned32 size;
-    bool loopback = true;
-  
-    while (loopback)
-    {
-    printf("%s - loopback from mq_2 to mq_2 ...\n", name_string()); fflush(stdout);
-
-    mq_2.receive(in, size);
-      printf("%s - mq_2 receive - %s, size=%i, message string size=%i\n",
-             name_string(), mq_2.last_status_string(), size, (int) strlen(in));
-      if (mq_2.successful())
-      {
-        if (size > (100 - 5))
-          printf("%s - size to large\n", name_string());
-        else
-        {
-          strcpy(out, name_string());
-          strcpy(out + 4, in);
-      
-          printf("%s - loopback to mq_2 - ", name_string());
-          mq_2.send(out, strlen(out) + 1);
-          printf("%s\n", mq_2.last_status_string());
-        }
-
-        if (strcmp(in, "broadcast message") == 0)
-          loopback = false;
-        else
-          wake_after(1500000);
-      }
-    }
-  }
-}
-
-
Index: src/tests/libtests/rtems++/rtems++.scn
===================================================================
--- c/src/tests/libtests/rtems++/rtems++.scn	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,161 +1,0 @@
-*** RTEMS++ TEST ***
-INIT - Task.create() - RTEMS[19] invalid thread priority
-INIT - Task.create() - RTEMS[00] successful completion
-INIT - Task.create() - RTEMS[16] illegal on calling thread
-INIT - Task.restart() - RTEMS[14] thread is in wrong state
-INIT - Task.start(0xDEADDEAD) - RTEMS[00] successful completion
-<pause - screen 1>
- * START Task Class test *
-TA1  - test argument - argument matched
-TA1  - copy constructor - local and this id's match
-TA1  - copy constructor - local and this name's match
-TA1  - copy operator - local and this id's match
-TA1  - copy operator - local and this name's match
-TA1  - not owner destroy's task - RTEMS[23] not owner of resource
-TA1  - connect to a local valid task name - RTEMS[00] successful completion
-TA1  - connect to an invalid task name - RTEMS[03] invalid object name
-SELF - connect to a task on an invalid node - RTEMS[21] invalid node id
-TA1  - restart from a non-owner - RTEMS[23] not owner of resource
-<pause - screen 2>
-TA1  - wake after 0 secs - RTEMS[00] successful completion
-TA1  - wake after 500 msecs - RTEMS[00] successful completion
-TA1  - wake after 5 secs - RTEMS[00] successful completion
-TA1  - wake when - to do
-TA1  - connected object wake after 0 secs - RTEMS[00] successful completion
-TA1  - connected object wake after 500 msecs - RTEMS[00] successful completion
-TA1  - connected object wake after 5 secs - RTEMS[00] successful completion
-TA1  - connected object wake when - to do
-SELF - self object wake after 0 secs - RTEMS[00] successful completion
-SELF - self object wake after 500 msecs - RTEMS[00] successful completion
-SELF - self object wake after 5 secs - RTEMS[00] successful completion
-SELF - self object wake when - to do
-TA1  - get priority - RTEMS[00] successful completion, priority is 10
-TA1  - set priority to 512 - RTEMS[19] invalid thread priority
-TA1  - set priority to 25 - RTEMS[00] successful completion
-TA1  - set priority to original - RTEMS[00] successful completion, priority was 25
-TA1  - connected object get priority - RTEMS[00] successful completion, priority is 10
-TA1  - connected object set priority to 512 - RTEMS[19] invalid thread priority
-TA1  - connected object set priority to 25 - RTEMS[00] successful completion
-TA1  - connected object set priority to original - RTEMS[00] successful completion, priority was 25
-SELF - self object get priority - RTEMS[00] successful completion, priority is 10
-SELF - self object set priority to 512 - RTEMS[19] invalid thread priority
-SELF - self object set priority to 25 - RTEMS[00] successful completion
-SELF - self object set priority to original - RTEMS[00] successful completion, priority was 25
-TA1  - get note - RTEMS[00] successful completion, note is 0
-TA1  - get with bad notepad number - RTEMS[10] number was invalid, note is 0
-TA1  - set note to 0xDEADBEEF - RTEMS[00] successful completion
-TA1  - get note - RTEMS[00] successful completion, note is 0xDEADBEEF
-TA1  - set note to original value - RTEMS[00] successful completion
-TA1  - connected object get note - RTEMS[00] successful completion, notepad is 0
-TA1  - connected object get with bad notepad number - RTEMS[10] number was invalid, note is 0
-TA1  - connected object set note to 0xDEADBEEF - RTEMS[00] successful completion
-TA1  - connected object get note - RTEMS[00] successful completion, note is 0xDEADBEEF
-TA1  - connected object set note to original value - RTEMS[00] successful completion
-SELF - self object get note - RTEMS[00] successful completion, note is 0
-SELF - self object get with bad notepad number - RTEMS[10] number was invalid, note is 0
-SELF - self object set note to 0xDEADBEEF - RTEMS[00] successful completion
-SELF - self object get note - RTEMS[00] successful completion, notepad is 0xDEADBEEF
-SELF - self object set note to original value - RTEMS[00] successful completion
- * END Task Class test *
-<pause - screen 3>
- * START TaskMode Class test *
-SELF - get mode - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
-SELF - get preemption state - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT 
-SELF - set preemption state to RTEMS_PREEMPT - RTEMS[00] successful completion,
-         mode is 0x00000000, RTEMS_PREEMPT RTEMS_TIMESLICE RTEMS_NO_ASR INTMASK=0
-SELF - set preemption state to RTEMS_NO_PREEMPT - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
-SELF - get timeslice state - RTEMS[00] successful completion,
-         mode is 0x00000000, RTEMS_TIMESLICE 
-SELF - set timeslice state to RTEMS_TIMESLICE - RTEMS[00] successful completion,
-         mode is 0x00000300, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
-SELF - set timeslice state to RTEMS_NO_TIMESLICE - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
-SELF - get asr state - RTEMS[00] successful completion,
-         mode is 0x00000000, RTEMS_NO_ASR 
-SELF - set asr state to RTEMS_ASR - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
-SELF - set asr state to RTEMS_NO_ASR - RTEMS[00] successful completion,
-         mode is 0x00000500, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
-SELF - get current interrupt level - RTEMS[00] successful completion, level is 0
-SELF - set interrupt level to 102 - RTEMS[00] successful completion
-SELF - set interrupt level to original level - RTEMS[00] successful completion, level was 0
-SELF - set mode to original mode - RTEMS[00] successful completion,
-         mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
- * END TaskMode Class test *
-<pause - screen 4>
- * START Event Class test *
-TA1  - create task 2 - RTEMS[00] successful completion
-TA1  - start task 2 - RTEMS[00] successful completion
-TA1  - construct event connecting to task 2 - RTEMS[00] successful completion
-TA2  - event no wait - RTEMS[13] request not satisfied
-TA2  - event 5 secs timeout - RTEMS[06] timed out waiting
-TA2  - event wait forever for signal 0 from TA1 ....
-TA1  - send event signal 0 using the task id - RTEMS[00] successful completion
-TA2  - RTEMS[00] successful completion, signals out are 0x00000001
-TA2  - event wait forever for signal 0 from TA1 ....
-TA1  - send event signal 0 using the task object reference - RTEMS[00] successful completion
-TA2  - RTEMS[00] successful completion, signals out are 0x00000001
-TA2  - event wait forever for signal 31 from TA1 ....
-TA1  - send event signal 31 using connected id - RTEMS[00] successful completion
-TA2  - RTEMS[00] successful completion, signals out are 0x80000000
-TA2  - event wait forever for signal 0 and 31 from TA1 ....
-TA1  - send event signal 0 and 31 - RTEMS[00] successful completion
-TA1  - waiting 5 secs for TA2 to finish
-TA2  - RTEMS[00] successful completion, signals out are 0x80000001
-TA2  - send event signal 1 - RTEMS[00] successful completion
-TA2  - event wait forever for signal 1 from TA2 - RTEMS[00] successful completion, signals out are 0x00000002
-TA2  - destory itself
- * END Event Class test *
-<pause - screen 5>
- * START Interrupt Class test *
- do not know a portable BSP type interrupt test
- * END Interrupt Class test *
-<pause - screen 6>
- * START MessageQueue Class test *
-TA1  - construct message queue 1 with no memory error - RTEMS[05] too many
-TA1  - construct/create message queue 2 - RTEMS[00] successful completion
-TA1  - send u1 to mq_2 - RTEMS[00] successful completion
-TA1  - urgent send u2 to mq_2 - RTEMS[00] successful completion
-TA1  - create task 3_1 - RTEMS[00] successful completion
-TA1  - start task 3_1 - RTEMS[00] successful completion
-TA1  - create task 3_2 - RTEMS[00] successful completion
-TA1  - start task 3_2 - RTEMS[00] successful completion
-TA31 - construction connect mq_2 - RTEMS[00] successful completion
-TA31 - loopback from mq_2 to mq_2 ...
-TA31 - mq_2 receive - RTEMS[00] successful completion, size=12, message string size=11
-TA31 - loopback to mq_2 - RTEMS[00] successful completion
-TA32 - construction connect mq_2 - RTEMS[00] successful completion
-TA32 - loopback from mq_2 to mq_2 ...
-TA32 - mq_2 receive - RTEMS[00] successful completion, size=12, message string size=11
-TA32 - loopback to mq_2 - RTEMS[00] successful completion
-TA1  - receive u2 on mq_2 ...
-TA1  - RTEMS[00] successful completion
-TA1  - message u2 received correctly
-TA1  - receive u1 on mq_2 ...
-TA1  - RTEMS[00] successful completion
-TA1  - message u1 received correctly
-TA31 - loopback from mq_2 to mq_2 ...
-TA32 - loopback from mq_2 to mq_2 ...
-TA1  - broadcast send b1 ...
-TA1  - mq_2 broadcast send - RTEMS[00] successful completion, count=2
-TA31 - mq_2 receive - RTEMS[00] successful completion, size=18, message string size=17
-TA31 - loopback to mq_2 - RTEMS[00] successful completion
-TA31 - destory itself
-TA32 - mq_2 receive - RTEMS[00] successful completion, size=18, message string size=17
-TA32 - loopback to mq_2 - RTEMS[00] successful completion
-TA32 - destory itself
-TA1  - receive message b1 on mq_2 from TA31...
-TA1  - RTEMS[00] successful completion
-TA1  - message b1 received correctly
-TA1  - receive message b1 on mq_2 from TA31...
-TA1  - RTEMS[00] successful completion
-TA1  - message b1 received correctly
-TA1  - send f1 to mq_2 - RTEMS[00] successful completion
-TA1  - send f1 to mq_2 - RTEMS[00] successful completion
-TA1  - send f1 to mq_2 - RTEMS[00] successful completion
-TA1  - flush mq_2 - RTEMS[00] successful completion, flushed=3
- * END MessageQueue Class test *
-<pause - screen 7>
Index: src/tests/libtests/rtmonuse/.cvsignore
===================================================================
--- c/src/tests/libtests/rtmonuse/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/rtmonuse/Makefile.am
===================================================================
--- c/src/tests/libtests/rtmonuse/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,42 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = rtmonuse
-
-MANAGERS = io rate_monotonic
-
-C_FILES = init.c getall.c task1.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES = system.h
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES = scn
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/rtmonuse/getall.c
===================================================================
--- c/src/tests/libtests/rtmonuse/getall.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,42 +1,0 @@
-/*  Get_all_counters
- *
- *  This routine allows TA5 to atomically obtain the iteration counters.
- *
- *  Input parameters:  NONE
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-
-void Get_all_counters()
-{
-  rtems_mode        previous_mode;
-  rtems_status_code status;
-
-  status = rtems_task_mode(
-    RTEMS_NO_PREEMPT,
-    RTEMS_PREEMPT_MASK,
-    &previous_mode
-  );
-  directive_failed( status, "rtems_task_mode to RTEMS_NO_PREEMPT" );
-
-  Temporary_count = Count;
-  Count.count[ 1 ] = 0;
-  Count.count[ 2 ] = 0;
-  Count.count[ 3 ] = 0;
-  Count.count[ 4 ] = 0;
-  Count.count[ 5 ] = 0;
-
-  status = rtems_task_mode( RTEMS_PREEMPT, RTEMS_PREEMPT_MASK, &previous_mode );
-  directive_failed( status, "rtems_task_mode to RTEMS_PREEMPT" );
-}
Index: src/tests/libtests/rtmonuse/init.c
===================================================================
--- c/src/tests/libtests/rtmonuse/init.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,70 +1,0 @@
-/*  Init
- *
- *  This routine is the initialization task for this test program.
- *  It is a user initialization task and has the responsibility for creating
- *  and starting the tasks that make up the test.  If the time of day
- *  clock is required for the test, it should also be set to a known
- *  value by this function.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#define TEST_INIT
-#include "system.h"
-
-#include <rtems/rtmonuse.h>
-
-rtems_task Init(
-  rtems_task_argument argument
-)
-{
-  rtems_unsigned32  index;
-  rtems_status_code status;
-
-  puts( "\n\n*** RATE MONOTONIC PERIOD STATISTICS TEST ***" );
-  Period_usage_Initialize();
-
-  Task_name[ 1 ] =  rtems_build_name( 'T', 'A', '1', ' ' );
-  Task_name[ 2 ] =  rtems_build_name( 'T', 'A', '2', ' ' );
-  Task_name[ 3 ] =  rtems_build_name( 'T', 'A', '3', ' ' );
-  Task_name[ 4 ] =  rtems_build_name( 'T', 'A', '4', ' ' );
-  Task_name[ 5 ] =  rtems_build_name( 'T', 'A', '5', ' ' );
-
-  for ( index = 1 ; index <= 5 ; index++ ) {
-    status = rtems_task_create(
-      Task_name[ index ],
-      Priorities[ index ],
-      RTEMS_MINIMUM_STACK_SIZE * 4,
-      RTEMS_DEFAULT_MODES,
-      (index == 5) ? RTEMS_FLOATING_POINT : RTEMS_DEFAULT_ATTRIBUTES,
-      &Task_id[ index ]
-    );
-    directive_failed( status, "rtems_task_create loop" );
-  }
-
-  for ( index = 1 ; index <= 5 ; index++ ) {
-    status = rtems_task_start( Task_id[ index ], Task_1_through_5, index );
-    directive_failed( status, "rtems_task_start loop" );
-  }
-
-  Count.count[ 1 ] = 0;
-  Count.count[ 2 ] = 0;
-  Count.count[ 3 ] = 0;
-  Count.count[ 4 ] = 0;
-  Count.count[ 5 ] = 0;
-
-  status = rtems_task_delete( RTEMS_SELF );
-  directive_failed( status, "rtems_task_delete of RTEMS_SELF" );
-}
Index: src/tests/libtests/rtmonuse/rtmonuse.scn
===================================================================
--- c/src/tests/libtests/rtmonuse/rtmonuse.scn	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,27 +1,0 @@
-*** TEST 20 ***
-TA1 - rtems_rate_monotonic_create id = 0x28010001
-TA1 - rtems_rate_monotonic_ident id = 0x28010001
-TA1 - (0x28010001) period 2
-TA2 - rtems_rate_monotonic_create id = 0x28010002
-TA2 - rtems_rate_monotonic_ident id = 0x28010002
-TA2 - (0x28010002) period 2
-TA3 - rtems_rate_monotonic_create id = 0x28010003
-TA3 - rtems_rate_monotonic_ident id = 0x28010003
-TA3 - (0x28010003) period 2
-TA4 - rtems_rate_monotonic_create id = 0x28010004
-TA4 - rtems_rate_monotonic_ident id = 0x28010004
-TA4 - (0x28010004) period 2
-TA5 - rtems_rate_monotonic_create id = 0x28010005
-TA5 - rtems_rate_monotonic_ident id = 0x28010005
-TA5 - (0x28010005) period 100
-TA5 - PERIODS CHECK OK (1)
-TA5 - PERIODS CHECK OK (2)
-TA5 - PERIODS CHECK OK (3)
-TA5 - PERIODS CHECK OK (4)
-TA5 - PERIODS CHECK OK (5)
-TA5 - PERIODS CHECK OK (6)
-TA5 - PERIODS CHECK OK (7)
-TA5 - PERIODS CHECK OK (8)
-TA5 - PERIODS CHECK OK (9)
-TA5 - PERIODS CHECK OK (10)
-*** END OF TEST 20 ***
Index: src/tests/libtests/rtmonuse/system.h
===================================================================
--- c/src/tests/libtests/rtmonuse/system.h	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,61 +1,0 @@
-/*  system.h
- *
- *  This include file contains information that is included in every
- *  function in the test set.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <tmacros.h>
-
-/* types */
-
-struct counters {
-  rtems_unsigned32 count[6];
-};
-
-/* functions */
-
-rtems_task Init(
-  rtems_task_argument argument
-);
- 
-rtems_task Task_1_through_5(
-  rtems_task_argument argument
-);
- 
-void Get_all_counters( void );
- 
-/* configuration information */
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define CONFIGURE_MAXIMUM_TASKS               6
-#define CONFIGURE_MAXIMUM_PERIODS             10
-
-#define CONFIGURE_INIT_TASK_PRIORITY          10
-#define CONFIGURE_INIT_TASK_INITIAL_MODES     RTEMS_DEFAULT_MODES
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#define CONFIGURE_EXTRA_TASK_STACKS           (15 * RTEMS_MINIMUM_STACK_SIZE)
-#include <confdefs.h>
-
-/* global variables */
-
-TEST_EXTERN rtems_id   Task_id[ 6 ];     /* array of task ids */
-TEST_EXTERN rtems_name Task_name[ 6 ];   /* array of task names */
-
-TEST_EXTERN struct counters Count;       /* iteration counters */
-TEST_EXTERN struct counters Temporary_count;
-extern rtems_task_priority Priorities[ 6 ];
-
-/* end of include file */
Index: src/tests/libtests/rtmonuse/task1.c
===================================================================
--- c/src/tests/libtests/rtmonuse/task1.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,123 +1,0 @@
-/*  Task_1_through_5
- *
- *  This routine serves as a test task for the period capabilities of the
- *  Rate Monotonic Manager.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-
-#include <rtems/cpuuse.h>
-#include <rtems/rtmonuse.h>
-
-rtems_unsigned32    Periods[6]    = { 0,   2,   2,   2,   2, 100 };
-rtems_unsigned32    Iterations[6] = { 0,  50,  50,  50,  50,   1 };
-rtems_task_priority Priorities[6] = { 0,   1,   1,   3,   4,   5 };
-
-rtems_task Task_1_through_5(
-  rtems_unsigned32 argument
-)
-{
-  rtems_id          rmid;
-  rtems_id          test_rmid;
-  rtems_unsigned32  index;
-  rtems_unsigned32  pass;
-  rtems_unsigned32  failed;
-  rtems_status_code status;
-
-  status = rtems_rate_monotonic_create( argument, &rmid );
-  directive_failed( status, "rtems_rate_monotonic_create" );
-  put_name( Task_name[ argument ], FALSE );
-  printf( "- rtems_rate_monotonic_create id = 0x%08x\n", rmid );
-
-  status = rtems_rate_monotonic_ident( argument, &test_rmid );
-  directive_failed( status, "rtems_rate_monotonic_ident" );
-  put_name( Task_name[ argument ], FALSE );
-  printf( "- rtems_rate_monotonic_ident id = 0x%08x\n", test_rmid );
-
-  if ( rmid != test_rmid ) {
-     printf( "RMID's DO NOT MATCH (0x%x and 0x%x)\n", rmid, test_rmid );
-     rtems_test_exit( 0 );
-  }
-
-  put_name( Task_name[ argument ], FALSE );
-  printf( "- (0x%08x) period %d\n", rmid, Periods[ argument ] );
-
-  status = rtems_task_wake_after( 2 );
-  directive_failed( status, "rtems_task_wake_after" );
-
-  switch ( argument ) {
-    case 1:
-    case 2:
-    case 3:
-    case 4:
-      while ( FOREVER ) {
-        Period_usage_Update( rmid );
-
-        status = rtems_rate_monotonic_period( rmid, Periods[ argument ] );
-        directive_failed( status, "rtems_rate_monotonic_period" );
-        Count.count[ argument ]++;
-      }
-      break;
-    case 5:
-      pass   = 0;
-      failed = 0;
-
-      status = rtems_rate_monotonic_period( rmid, Periods[ argument ] );
-      directive_failed( status, "rtems_rate_monotonic_period 1 of TA5" );
-
-      Get_all_counters();
-
-      while ( FOREVER ) {
-        Period_usage_Update( rmid );
-
-        status = rtems_rate_monotonic_period( rmid, Periods[ argument ] );
-        directive_failed( status, "rtems_rate_monotonic_period 2 of TA5" );
-
-        Get_all_counters();
-
-        for( index = 1 ; index <= 4 ; index++ ) {
-          if ( Temporary_count.count[ index ] != Iterations[ index ] ) {
-            puts_nocr( "FAIL -- " );
-            put_name ( Task_name[ index ], FALSE );
-            printf   ( " Actual=%d, Expected=%d\n",
-                       Temporary_count.count[ index ],
-                       Iterations[ index ]
-                     );
-            failed += 1;
-          }
-        }
-
-        if ( failed == 5 )
-          rtems_test_exit( 0 );
-
-        pass += 1;
-
-        printf( "TA5 - PERIODS CHECK OK (%d)\n", pass );
-
-        fflush( stdout );
-
-        if ( pass == 10 ) {
-          puts( "*** END OF RATE MONOTONIC PERIOD STATISTICS TEST ***" );
-          CPU_usage_Dump();
-          Period_usage_Dump();
-          rtems_test_exit( 0 );
-        }
-
-      }
-      break;
-  }
-}
Index: src/tests/libtests/stackchk/.cvsignore
===================================================================
--- c/src/tests/libtests/stackchk/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/stackchk/Makefile.am
===================================================================
--- c/src/tests/libtests/stackchk/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,42 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = stackchk
-
-MANAGERS = io
-
-C_FILES = blow.c init.c task1.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES = system.h
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES = scn
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/stackchk/blow.c
===================================================================
--- c/src/tests/libtests/stackchk/blow.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,48 +1,0 @@
-/*  task1.c
- *
- *  This set of three tasks do some simple task switching for about
- *  15 seconds and then call a routine to "blow the stack".
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <rtems.h>
-
-void b() {}
-
-void blow_stack( void )
-{
-  volatile unsigned32 *low, *high;
-  unsigned char *area;
-
-b();
-  /*
-   *  Destroy the first and last 16 bytes of our stack... Hope it
-   *  does not cause problems :)
-   */
-
- area = (unsigned char *)_Thread_Executing->Start.Initial_stack.area;
-
- low  = (volatile unsigned32 *) (area + HEAP_OVERHEAD);
- high = (volatile unsigned32 *)
-            (area + _Thread_Executing->Start.Initial_stack.size - 16);
-
-
- low[0] = 0x11111111;
- low[1] = 0x22222222;
- low[2] = 0x33333333;
- low[3] = 0x44444444;
-
- high[0] = 0x55555555;
- high[1] = 0x66666666;
- high[2] = 0x77777777;
- high[3] = 0x88888888;
-
-}
Index: src/tests/libtests/stackchk/init.c
===================================================================
--- c/src/tests/libtests/stackchk/init.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,85 +1,0 @@
-/*  Init
- *
- *  This routine is the initialization task for this test program.
- *  It is a user initialization task and has the responsibility for creating
- *  and starting the tasks that make up the test.  If the time of day
- *  clock is required for the test, it should also be set to a known
- *  value by this function.
- *
- *  Input parameters:
- *    argument - task argument
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#define TEST_INIT
-#include "system.h"
-
-rtems_task Init(
-  rtems_task_argument argument
-)
-{
-  rtems_time_of_day time;
-  rtems_status_code status;
-
-  puts( "\n\n*** TEST STACK CHECKER ***" );
-
-  build_time( &time, 12, 31, 1988, 9, 0, 0, 0 );
-  status = rtems_clock_set( &time );
-  directive_failed( status, "rtems_clock_set" );
-
-  Task_name[ 1 ] = rtems_build_name( 'T', 'A', '1', ' ' );
-  Task_name[ 2 ] = rtems_build_name( 'T', 'A', '2', ' ' );
-  Task_name[ 3 ] = rtems_build_name( 'T', 'A', '3', ' ' );
-
-  status = rtems_task_create(
-     Task_name[ 1 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_DEFAULT_ATTRIBUTES,
-     &Task_id[ 1 ]
-  );
-  directive_failed( status, "rtems_task_create of TA1" );
-
-  status = rtems_task_create(
-     Task_name[ 2 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_DEFAULT_ATTRIBUTES,
-     &Task_id[ 2 ]
-  );
-  directive_failed( status, "rtems_task_create of TA2" );
-
-  status = rtems_task_create(
-     Task_name[ 3 ],
-     1,
-     TASK_STACK_SIZE,
-     RTEMS_DEFAULT_MODES,
-     RTEMS_DEFAULT_ATTRIBUTES,
-     &Task_id[ 3 ]
-  );
-  directive_failed( status, "rtems_task_create of TA3" );
-
-  status = rtems_task_start( Task_id[ 1 ], Task_1_through_3, 0 );
-  directive_failed( status, "rtems_task_start of TA1" );
-
-  status = rtems_task_start( Task_id[ 2 ], Task_1_through_3, 0 );
-  directive_failed( status, "rtems_task_start of TA2" );
-
-  status = rtems_task_start( Task_id[ 3 ], Task_1_through_3, 0 );
-  directive_failed( status, "rtems_task_start of TA3" );
-
-  status = rtems_task_delete( RTEMS_SELF );
-  directive_failed( status, "rtems_task_delete of RTEMS_SELF" );
-}
Index: src/tests/libtests/stackchk/stackchk.scn
===================================================================
--- c/src/tests/libtests/stackchk/stackchk.scn	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,9 +1,0 @@
-*** TEST STACK CHECKER ***
-TA1  - rtems_clock_get - 09:00:00   12/31/1988
-TA2  - rtems_clock_get - 09:00:00   12/31/1988
-TA3  - rtems_clock_get - 09:00:00   12/31/1988
-TA1  - rtems_clock_get - 09:00:05   12/31/1988
-TA1  - rtems_clock_get - 09:00:10   12/31/1988
-TA2  - rtems_clock_get - 09:00:10   12/31/1988
-TA1  - rtems_clock_get - 09:00:15   12/31/1988
----> error indictation
Index: src/tests/libtests/stackchk/system.h
===================================================================
--- c/src/tests/libtests/stackchk/system.h	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,53 +1,0 @@
-/*  system.h
- *
- *  This include file contains information that is included in every
- *  function in the test set.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <tmacros.h>
-
-/* macros */
-
-/* functions */
-
-rtems_task Init(
-  rtems_task_argument argument
-);
-
-rtems_task Task_1_through_3(
-  rtems_task_argument argument
-);
-
-void blow_stack( void );
-
-/* configuration information */
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define TASK_STACK_SIZE (RTEMS_MINIMUM_STACK_SIZE*3)
-
-#define CONFIGURE_MAXIMUM_TASKS               4
-#define CONFIGURE_EXTRA_TASK_STACKS (3 * (RTEMS_MINIMUM_STACK_SIZE * 2))
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#define STACK_CHECKER_ON
-
-#include <confdefs.h>
-
-/* global variables */
-
-TEST_EXTERN rtems_id   Task_id[ 4 ];         /* array of task ids */
-TEST_EXTERN rtems_name Task_name[ 4 ];       /* array of task names */
-
-/* end of include file */
Index: src/tests/libtests/stackchk/task1.c
===================================================================
--- c/src/tests/libtests/stackchk/task1.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,43 +1,0 @@
-/*  task1.c
- *
- *  This set of three tasks do some simple task switching for about
- *  15 seconds and then call a routine to "blow the stack".
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include "system.h"
-
-rtems_task Task_1_through_3(
-  rtems_task_argument argument
-)
-{
-  rtems_id          tid;
-  rtems_time_of_day time;
-  rtems_status_code status;
-
-  status = rtems_task_ident( RTEMS_SELF, RTEMS_SEARCH_ALL_NODES, &tid );
-  directive_failed( status, "rtems_task_ident" );
-
-  while( FOREVER ) {
-    status = rtems_clock_get( RTEMS_CLOCK_GET_TOD, &time );
-    directive_failed( status, "rtems_clock_get" );
-
-    if ( time.second >= 15 && tid == Task_id[ 1 ] ) {
-       blow_stack();
-    }
-
-    put_name( Task_name[ task_number( tid ) ], FALSE );
-    print_time( " - rtems_clock_get - ", &time, "\n" );
-
-    status = rtems_task_wake_after( task_number( tid ) * 5 * TICKS_PER_SECOND );
-    directive_failed( status, "rtems_task_wake_after" );
-  }
-}
Index: src/tests/libtests/termios/.cvsignore
===================================================================
--- c/src/tests/libtests/termios/.cvsignore	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,2 +1,0 @@
-Makefile
-Makefile.in
Index: src/tests/libtests/termios/Makefile.am
===================================================================
--- c/src/tests/libtests/termios/Makefile.am	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,42 +1,0 @@
-##
-## $Id$
-##
-
-
-TEST = termios
-
-MANAGERS = io
-
-C_FILES = init.c
-C_O_FILES = $(C_FILES:%.c=${ARCH}/%.$(OBJEXT))
-
-H_FILES =
-noinst_HEADERS = $(H_FILES)
-
-DOCTYPES =
-DOCS = $(DOCTYPES:%=$(TEST).%)
-
-SRCS = $(DOCS) $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-PRINT_SRCS = $(DOCS)
-
-PGM = ${ARCH}/$(TEST).exe
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(top_srcdir)/../automake/compile.am
-include $(top_srcdir)/../automake/leaf.am
-include $(top_srcdir)/libtests.am
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-${PGM}: $(OBJS) $(LINK_FILES)
-	$(make-exe)
-
-all-local: $(ARCH) $(TMPINSTALL_FILES)
-
-EXTRA_DIST = $(C_FILES) $(DOCS)
-
-include $(top_srcdir)/../automake/local.am
Index: src/tests/libtests/termios/README
===================================================================
--- c/src/tests/libtests/termios/README	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,99 +1,0 @@
-#
-#  $Id$
-#
-
-These tests are brought to you by the letter `q'.
-
-When you start the test, you should see:
-
-  You have the following choices:
-    1 - Reset the struct termios
-    2 - Look at the current termios setting
-    3 - Change the line characteristics
-    4 - Test canonical input
-    5 - Test raw input
-    9 - Exit
-  Enter your choice (1 to 5 or 9, followed by a carriage return): 
-
-The individual tests are briefly described below:
-
-
-1. Reset the struct termios.
-
-Included just in case you get into trouble. More than likely, if you are in
-trouble, neither input nor output are likely to work and this won't help. But
-hey, it should give you some warm fuzzy feeling that its there...
-
-
-2. Look at the current termios setting
-
-Dumps the current state of the termios settings in hex and with symbolic flag
-names.
-
-
-3. Change the line characteristics
-
-Allows you to change the line speed, parity, number of data bits and number of
-stop bits. You must supply a delay before the change takes effect. This gives
-you time to switch your terminal settings to continue with the test.
-
-WARNING: Minicom under Linux gets extremely unhappy (as does the /dev/ttyS?
-underlying devices) if you change the line characteristics and do not make the
-corresponding change in the terminal emulator.
-
-
-4. Test canonical input
-
-Simple test of canonical or cooked input mode. Try typing some tabs and/or control characters and make sure that you can backspace over them properly.
-
-
-5. Test raw input
-
-The line is placed into raw mode and four separate test are done:
-
-VMIN=0, VTIME=0
-        Each letter you type should produce a line of output.
-        The `count' should be quite large, since (as you correctly
-        pointed out) the read is non-blocking.  The time should be
-        the interval between typing characters.
-        Type a `q' to finish the test.
-VMIN=0, VTIME=20
-        Again, each letter should produce a line of output.  The
-        `count' should be much smaller -- the read is non-blocking
-        but has a timeout of 2 seconds, so the count should be about
-        half the `interval'.
-        Type a `q' to finish the test.
-VMIN=5, VTIME=0
-        A line should be produced for every 5 characters typed.  The
-        count should be 1.  This is a blocking read.
-        Type a `q' as the first character of a group of 5 to finish
-        the test.
-VMIN=5, VTIME=20
-        Type a character.  Two seconds later a line should be printed.
-        Count should be 1.  Type a character, and another within 2 seconds.
-        Two seconds after last character (or right after the 5th character)
-        a line should be printed.
-        Type a `q' as the first character of a group to finish the test.
-
-
-9. Exit
-
-Gets you out of the test.
-
-
-Clear???
-
-
----
-Eric Norum
-eric@skatter.usask.ca
-Saskatchewan Accelerator Laboratory
-University of Saskatchewan
-Saskatoon, Canada.
-
-Charles-Antoine Gauthier
-Software Engineering Group
-Institute for Information Technology
-National Research Council of Canada
-charles.gauthier@nrc.ca
-
Index: src/tests/libtests/termios/init.c
===================================================================
--- c/src/tests/libtests/termios/init.c	(revision c727a7eb3bf9e3c46d2ff5d38cd60609610b6795)
+++ 	(revision )
@@ -1,781 +1,0 @@
-/*
- * RTEMS configuration/initialization
- * 
- * This program may be distributed and used for any purpose.
- * I ask only that you:
- *  1. Leave this author information intact.
- *  2. Document any changes you make.
- *
- * W. Eric Norum
- * Saskatchewan Accelerator Laboratory
- * University of Saskatchewan
- * Saskatoon, Saskatchewan, CANADA
- * eric@skatter.usask.ca
- * 
- * Additions:
- * Charles-Antoine Gauthier
- * Software Engineering Group
- * Institute for Information Technology
- * National Research Council of Canada
- * charles.gauthier@nrc.ca
- *
- *  $Id$
- */
-
-#include <bsp.h>
-
-
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-
-#define CONFIGURE_MAXIMUM_TASKS       1
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#define CONFIGURE_MICROSECONDS_PER_TICK 1000
-
-#define CONFIGURE_INIT
-
-rtems_task Init (rtems_task_argument argument);
-
-#include <confdefs.h>
-
-#include <stdio.h>
-#include <unistd.h>
-#include <termios.h>
-#include <errno.h>
-#include <string.h>
-
-#include <tmacros.h>
-
-#if !defined(fileno)
-int fileno( FILE *stream); /* beyond ANSI */
-#endif
-
-/* Some of the termios dumping code depends on bit positions! */
-
-void print_32bits( unsigned long bits, unsigned char size, char * names[] )
-{
-  unsigned char i;
-
-  for( i = 0; i < size; i++ ) {
-    if( (bits >> i) & 0x1 )
-      printf( "%s ", names[i] );
-  }
-}
-
-
-void print_c_iflag( struct termios * tp )
-{
-  char * c_iflag_bits [] = {
-    "IGNBRK",   /* 0000001 */
-    "BRKINT",   /* 0000002 */
-    "IGNPAR",   /* 0000004 */
-    "PARMRK",   /* 0000010 */
-    "INPCK",    /* 0000020 */
-    "ISTRIP",   /* 0000040 */
-    "INLCR",    /* 0000100 */
-    "IGNCR",    /* 0000200 */
-    "ICRNL",    /* 0000400 */
-    "IUCLC",    /* 0001000 */
-    "IXON",     /* 0002000 */
-    "IXANY",    /* 0004000 */
-    "IXOFF",    /* 0010000 */
-    "IMAXBEL",  /* 0020000 */
-    "unknown",  /* 0040000 */
-    "unknown",  /* 0100000 */
-    "unknown",  /* 0200000 */
-    "unknown",  /* 0400000 */
-    "unknown",  /* 1000000 */
-    "unknown",  /* 2000000 */
-    "unknown"   /* 4000000 */
-  };
-
-  printf( "c_iflag = 0x%08x\n\t", tp->c_iflag );
-  print_32bits( tp->c_iflag, sizeof( c_iflag_bits )/sizeof( char * ), c_iflag_bits );
-  printf( "\n" );
-}
-
-
-void print_c_oflag( struct termios * tp )
-{
-  printf( "c_oflag = 0x%08x\n\t", tp->c_oflag );
-
-  if( tp->c_oflag & OPOST )
-    printf( "OPOST " );
-    
-  if( tp->c_oflag & OLCUC )
-    printf( "OLCUC " );
-    
-  if( tp->c_oflag & ONLCR )
-    printf( "ONLCR " );
-    
-  if( tp->c_oflag & OCRNL )
-    printf( "OCRNL " );
-    
-  if( tp->c_oflag & ONOCR )
-    printf( "ONOCR " );
-    
-  if( tp->c_oflag & ONLRET )
-    printf( "ONLRET " );
-    
-  if( tp->c_oflag & OFILL )
-    printf( "OFILL " );
-    
-  if( tp->c_oflag & OFDEL )
-    printf( "OFDEL " );
-
-  switch( tp->c_oflag & NLDLY ) {
-    case NL0:
-      printf( "NL0 " );
-      break;
-      
-    case NL1:
-      printf( "NL1 " );
-      break;
-  }
-  
-  switch( tp->c_oflag & CRDLY ) {
-    case CR0:
-      printf( "CR0 " );
-      break;
-      
-    case CR1:
-      printf( "CR1 " );
-      break;
-      
-    case CR2:
-      printf( "CR2 " );
-      break;
-      
-    case CR3:
-      printf( "CR3 " );
-      break;
-  }
-  
-  switch( tp->c_oflag & TABDLY ) {
-    case TAB0:
-      printf( "TAB0 " );
-      break;
-      
-    case TAB1:
-      printf( "TAB1 " );
-      break;
-      
-    case TAB2:
-      printf( "TAB2 " );
-      break;
-      
-    case TAB3:
-      printf( "TAB3 " );
-      break;
-  }
-  
-  switch( tp->c_oflag & BSDLY ) {
-    case BS0:
-      printf( "BS0 " );
-      break;
-      
-    case BS1:
-      printf( "BS1 " );
-      break;
-  }
-  
-  switch( tp->c_oflag & VTDLY ) {
-    case VT0:
-      printf( "VT0 " );
-      break;
-      
-    case VT1:
-      printf( "VT1 " );
-      break;
-  }
-  
-  switch( tp->c_oflag & FFDLY ) {
-    case FF0:
-      printf( "FF0" );
-      break;
-      
-    case FF1:
-      printf( "FF1" );
-      break;
-  }
-  printf( "\n" );
-}
-
-
-void print_c_lflag( struct termios * tp )
-{
-  char * c_lflag_bits [] = {
-    "ISIG",        /* 0000001 */
-    "ICANON",      /* 0000002 */
-    "XCASE",       /* 0000004 */
-    "ECHO",        /* 0000010 */
-    "ECHOE",       /* 0000020 */
-    "ECHOK",       /* 0000040 */
-    "ECHONL",      /* 0000100 */
-    "NOFLSH",      /* 0000200 */
-    "TOSTOP",      /* 0000400 */
-    "ECHOCTL",     /* 0001000 */
-    "ECHOPRT",     /* 0002000 */
-    "ECHOKE",      /* 0004000 */
-    "FLUSHO",      /* 0010000 */
-    "unknown",     /* 0020000 */
-    "PENDIN",      /* 0040000 */
-    "IEXTEN",      /* 0100000 */
-    "unknown",     /* 0200000 */
-    "unknown",     /* 0400000 */
-    "unknown",     /* 1000000 */
-    "unknown",     /* 2000000 */
-    "unknown",     /* 4000000 */
-  };
-  
-  printf( "c_lflag = 0x%08x\n\t", tp->c_lflag );
-  print_32bits( tp->c_lflag, sizeof( c_lflag_bits )/sizeof( char * ), c_lflag_bits );
-  printf( "\n" );
-}
-
-
-void print_c_cflag( struct termios * tp )
-{
-  unsigned int baud;
-  
-  printf( "c_cflag = 0x%08x\n", tp->c_cflag );
-
-  baud = (tp->c_cflag & CBAUD) ;
-#if defined(__sh2__) 
-  if ( tp->c_cflag & CBAUDEX )
-#endif
-  switch( baud ) {
-    case B0:
-      printf( "\tCBAUD =\tB0\n" );
-      break;
-      
-    case B50:
-      printf( "\tCBAUD =\tB50\n" );
-      break;
-      
-    case B75:
-      printf( "\tCBAUD =\tB75\n" );
-      break;
-      
-    case B110:
-      printf( "\tCBAUD =\tB110\n" );
-      break;
-      
-    case B134:
-      printf( "\tCBAUD =\tB134\n" );
-      break;
-      
-    case B150:
-      printf( "\tCBAUD =\tB150\n" );
-      break;
-      
-    case B200:
-      printf( "\tCBAUD =\tB200\n" );
-      break;
-      
-    case B300:
-      printf( "\tCBAUD =\tB300\n" );
-      break;
-      
-    case B600:
-      printf( "\tCBAUD =\tB600\n" );
-      break;
-      
-    case B1200:
-      printf( "\tCBAUD =\tB1200\n" );
-      break;
-      
-    case B1800:
-      printf( "\tCBAUD =\tB1800\n" );
-      break;
-      
-    case B2400:
-      printf( "\tCBAUD =\tB2400\n" );
-      break;
-      
-    case B4800:
-      printf( "\tCBAUD =\tB4800\n" );
-      break;
-      
-    case B9600:
-      printf( "\tCBAUD =\tB9600\n" );
-      break;
-      
-    case B19200:
-      printf( "\tCBAUD =\tB19200\n" );
-      break;
-      
-    case B38400:
-      printf( "\tCBAUD =\tB38400\n" );
-      break;
-#if defined(__sh2__)
-    } 
-    else 
-    switch ( baud ) 
-    {
-#endif
-    case B57600:
-      printf( "\tCBAUD =\tB57600\n" );
-      break;
-      
-    case B115200:
-      printf( "\tCBAUD =\tB115200\n" );
-      break;
-      
-    case B230400:
-      printf( "\tCBAUD =\tB230400\n" );
-      break;
-      
-    case B460800:
-      printf( "\tCBAUD =\tB460800\n" );
-      break;
-      
-    default:
-      printf( "\tCBAUD =\tunknown (0x%08x)\n", baud );
-      break;
-    }
-
-  switch( tp->c_cflag & CSIZE ) {
-    case CS5:
-      printf( "\tCSIZE =\tCS5\n" );
-      break;
-      
-    case CS6:
-      printf( "\tCSIZE =\tCS6\n" );
-      break;
-      
-    case CS7:
-      printf( "\tCSIZE =\tCS7\n" );
-      break;
-      
-    case CS8:
-      printf( "\tCSIZE =\tCS8\n" );
-      break;
-  }
-
-  if( tp->c_cflag & CSTOPB )
-    printf( "\tCSTOPB set: send 2 stop bits\n" );
-  else
-    printf( "\tCSTOPB clear: send 1 stop bit\n" );
-  
-  if( tp->c_cflag & PARENB )
-    printf( "\tPARENB set: parity enabled\n" );
-  else
-    printf( "\tPARENB clear: parity disabled\n" );
-  
-  if( tp->c_cflag & PARODD )
-    printf( "\tPARODD set: parity odd\n" );
-  else
-    printf( "\tPARODD clear: parity even\n" );
-  
-  if( tp->c_cflag & CREAD )
-    printf( "\tCREAD set: receiver enabled\n" );
-  else
-    printf( "\tCREAD clear: treceiver disabled\n" );
-  
-  if( tp->c_cflag & HUPCL )
-    printf( "\tHUPCL set: enabled\n" );
-  else
-    printf( "\tHUPCL clear: disabled\n" );
-  
-  if( tp->c_cflag & CLOCAL )
-    printf( "\tCLOCAL set: ignore modem lines\n" );
-  else
-    printf( "\tCLOCAL clear: don't ignore modem lines\n" );
-  
-#if defined(CBAUDEX)
-  if( tp->c_cflag & CBAUDEX )
-    printf( "\tCBAUDEX set: What does this do?\n" );
-  else
-    printf( "\tCBAUDEX clear: What does this do?\n" );
-#endif
-  
-  if( tp->c_cflag & CRTSCTS )
-    printf( "\tCRTSCTS: harware flow control enabled?\n" );
-  else
-    printf( "\tCRTSCTS: hardware flow control disabled?\n" );
-}
-
-
-void print_c_cc( struct termios * tp )
-{
-  int i;
-  char * cc_index_names [NCCS] = {
-    "[VINTR]   ",   /* 0 */
-    "[VQUIT]   ",   /* 1 */
-    "[VERASE]  ",   /* 2 */
-    "[VKILL]   ",   /* 3 */
-    "[VEOF]    ",   /* 4 */
-    "[VTIME]   ",   /* 5 */
-    "[VMIN]    ",   /* 6 */
-    "[VSWTC    ",   /* 7 */
-    "[VSTART]  ",   /* 8 */
-    "[VSTOP]   ",   /* 9 */
-    "[VSUSP]   ",   /* 10 */
-    "[VEOL]    ",   /* 11 */
-    "[VREPRINT]",   /* 12 */
-    "[VDISCARD]",   /* 13 */
-    "[VWERASE] ",   /* 14 */
-    "[VLNEXT   ",   /* 15 */
-    "[VEOL2]   ",   /* 16 */
-    "unknown   ",   /* 17 */
-    "unknown   ",   /* 18 */
-  };
-
-  for( i = 0; i < NCCS; i++ ) {
-    printf( "c_cc%s = 0x%08x\n", cc_index_names[i], tp->c_cc[i] );
-  }
-}
-
-
-void print_termios( struct termios *tp )
-{
-  printf( "\nLooking at the current termios settings:\n\n" );
-  print_c_iflag( tp );
-  print_c_oflag( tp );
-  print_c_cflag( tp );
-  print_c_lflag( tp );
-  print_c_cc( tp );
-  printf( "\n" );
-}
-
-
-unsigned long get_baud_rate( void )
-{
-  unsigned long baud_rate;
-  
-  while( TRUE ) {
-    printf( "Enter the numerical value for the new baud rate.\n" );
-    printf( "Choices are: 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800\n" );
-    printf( "2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800\n" );
-    printf( "\nYour choice: " );
-    scanf( "%lu", &baud_rate );
-    printf( "\n" );
-    switch( baud_rate ) {
-      case 50:     return B50;
-      case 75:     return B75;
-      case 110:    return B110;
-      case 134:    return B134;
-      case 150:    return B150;
-      case 200:    return B200;
-      case 300:    return B300;
-      case 600:    return B600;
-      case 1200:   return B1200;
-      case 1800:   return B1800;
-      case 2400:   return B2400;
-      case 4800:   return B4800;
-      case 9600:   return B9600;
-      case 19200:  return B19200;
-      case 38400:  return B38400;
-      case 57600:  return B57600;
-      case 115200: return B115200;
-      case 230400: return B230400;
-      case 460800: return B460800;
-
-      default:
-        printf( "%lu is not a valid choice. Try again.\n\n", baud_rate );
-        break;
-    }
-  }
-}
-
-
-unsigned long get_parity()
-{
-  int parity;
-  
-  while( TRUE ) {
-    printf( "Enter the numerical value for the new parity\n" );
-    printf( "Choices are: 0 for no parity, 1 for even parity, 2 for odd parity\n" );
-    printf( "\nYour choice: " );
-    scanf( "%d", &parity );
-    printf( "\n" );
-    switch( parity ) {
-      case 0:
-        return 0;
-
-      case 1:
-        return PARENB;
-
-      case 2:
-        return PARENB | PARODD;
-
-      default:
-        printf( "%d is not a valid choice. Try again.\n\n", parity );
-        break;
-    }
-  }
-}
-
-
-unsigned long get_stop_bits()
-{
-  int stop_bits;
-
-  while( TRUE ) {
-    printf( "Enter the numerical value for the new number of stop bits\n" );
-    printf( "Choices are: 1 or 2\n" );
-    printf( "\nYour choice: " );
-    scanf( "%d", &stop_bits );
-    printf( "\n" );
-    switch( stop_bits ) {
-      case 1:
-        return 0;
-        
-      case 2:
-        return CSTOPB;
-
-      default:
-        printf( "%d is not a valid choice. Try again.\n\n", stop_bits );
-        break;
-    }
-  }
-}
-
-
-unsigned long get_data_bits()
-{
-  int data_bits;
-
-  while( TRUE ) {
-    printf( "Enter the numerical value for the new number of data bits\n" );
-    printf( "Choices are: 5, 6, 7 or 8\n" );
-    printf( "\nYour choice: " );
-    scanf( "%d", &data_bits );
-    printf( "\n" );
-    switch( data_bits ) {
-      case 5:
-        return CS5;
-        
-      case 6:
-        return CS6;
-        
-      case 7:
-        return CS7;
-        
-      case 8:
-        return CS8;
-
-      default:
-        printf( "%d is not a valid choice. Try again.\n\n", data_bits );
-        break;
-    }
-  }
-}
-
-
-void change_line_settings( struct termios *tp )
-{
-  unsigned long baud_rate, parity, stop_bits, data_bits, sleep_time;
-    
-  printf( "\nSetting line characteristics\n\n" );
-  
-  baud_rate = get_baud_rate();
-  parity = get_parity();
-  stop_bits = get_stop_bits();
-  data_bits = get_data_bits();
-
-  printf( "NOTE: You will not see output until you switch your terminal settings!\n" );
-  printf( "WARNING: If you do not switch your terminal settings, your terminal may hang.\n" );
-  printf( "Enter the number of seconds the test will wait for you to switch your terminal\n" );
-  printf( "settings before it continues\n" );
-  printf( "Sleep time (in seconds): " );
-  scanf( "%lu", &sleep_time );
-  printf( "\n" );
-  printf( "Setting line to new termios settings in %lu seconds.\n", sleep_time );
-
-  sleep( sleep_time );
-  
-  tp->c_cflag = CLOCAL | CREAD | parity | stop_bits | data_bits | baud_rate;
-  if( tcsetattr( fileno( stdin ), TCSADRAIN, tp ) < 0 ) {
-    perror( "change_line_settings(): tcsetattr() failed" );
-    rtems_test_exit( 1 );
-  }
-  printf( "Line settings set.\n" );
-}
-
-
-void canonical_input( struct termios *tp )
-{
-  char c, first_time = TRUE;
-    
-  printf( "\nTesting canonical input\n\n" );
-
-  printf( "Setting line to canonical input mode.\n" );
-  tp->c_lflag = ISIG | ICANON | ECHO | ECHONL | ECHOK | ECHOE | ECHOPRT | ECHOCTL | IEXTEN; 
-  tp->c_iflag = BRKINT | ICRNL | IXON | IMAXBEL;
-  if( tcsetattr( fileno( stdin ), TCSADRAIN, tp ) < 0 ) {
-    perror( "canonical_input(): tcsetattr() failed" );
-    rtems_test_exit( 1 );
-  }
-  
-  while ( ( c = getchar () ) != '\n');
-  printf( "Testing getchar(). Type some text followed by carriage return\n" );
-  printf( "Each character you entered will be echoed back to you\n\n" );
-  while ( ( c = getchar () ) != '\n') {
-    if( first_time ) {
-      printf( "\nYou typed:\n");
-      first_time = FALSE;
-    }
-    printf( "%c", c );
-  }
-  printf( "\n\nCanonical input test done.\n" );
-}
-
-
-/*
- * Test raw (ICANON=0) input
- */
-void do_raw_input( int vmin, int vtime )
-{
-  int i;
-  struct termios old, new;
-  rtems_interval ticksPerSecond, then, now;
-  unsigned int msec;
-  unsigned long count;
-  int nread;
-  unsigned char cbuf[100];
-
-  printf( "Raw input test with VMIN=%d  VTIME=%d\n", vmin, vtime );
-  
-  rtems_clock_get( RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticksPerSecond );
-  if ( tcgetattr( fileno ( stdin ), &old ) < 0 ) {
-    perror( "do_raw_input(): tcgetattr() failed" );
-    return;
-  }
-  
-  new = old;
-  new.c_lflag &= ~( ICANON | ECHO | ECHONL | ECHOK | ECHOE | ECHOPRT | ECHOCTL );
-  new.c_cc[VMIN] = vmin;
-  new.c_cc[VTIME] = vtime;
-  if( tcsetattr( fileno( stdin ), TCSADRAIN, &new ) < 0 ) {
-    perror ("do_raw_input(): tcsetattr() failed" );
-    return;
-  }
-  
-  do {
-    rtems_clock_get( RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &then );
-    count = 0;
-    for(;;) {
-      nread = read( fileno( stdin ), cbuf, sizeof cbuf );
-      if( nread < 0 ) {
-        perror( "do_raw_input(): read() failed" );
-        goto out;
-      }
-      count++;
-      if( nread != 0 )
-        break;
-    }
-    rtems_clock_get( RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &now );
-    msec = (now - then) * 1000 / ticksPerSecond;
-    printf( "Count:%-10lu  Interval:%3u.%3.3d  Char:",
-          count, msec / 1000, msec % 1000 );
-          
-    for( i = 0 ; i < nread ; i++ )
-      printf (" 0x%2.2x", cbuf[i]);
-    printf ("\n");
-    
-  } while( cbuf[0] != 'q' );
-  
-out:
-  if( tcsetattr( fileno( stdin ), TCSADRAIN, &old) < 0 )
-    perror("do_raw_input(): tcsetattr() failed: %s\n" );
-    
-  printf ("*** End of Raw input  VMIN=%d  VTIME=%d ***\n", vmin, vtime);
-}
-
-
-static void raw_input( struct termios *tp )
-{
-  printf( "\nTesting raw input input\n\n" );
-  printf( "Hit 'q' to terminate the test\n" );
-
-  do_raw_input( 0, 0 );
-  do_raw_input( 0, 20 );
-  do_raw_input( 5, 0 );
-  do_raw_input( 5, 20 );
-  
-  printf( "\nRaw input test done.\n" );
-}
-
-
-void usage( void )
-{
-  printf( "\nYou have the following choices:\n" );
-  printf( "  1 - Reset the struct termios\n" );
-  printf( "  2 - Look at the current termios setting\n" );
-  printf( "  3 - Change the line characteristics\n" );
-  printf( "  4 - Test canonical input\n" );
-  printf( "  5 - Test raw input\n" );
-  printf( "  9 - Exit\n" );
-  printf( "Enter your choice (1 to 5 or 9, followed by a carriage return): " );
-}
-
-
-/*
- * RTEMS Startup Task
- */
-rtems_task
-Init (rtems_task_argument ignored)
-{
-  char c ;
-  struct termios orig_termios, test_termios;
-  
-  printf( "\n\n*** TEST OF TERMIOS INPUT CAPABILITIES ***\n" );
-
-  if( tcgetattr( fileno( stdin ), &orig_termios ) < 0 ) {
-    perror( "tcgetattr() failed" );
-    rtems_test_exit( 0 );
-  }
-
-  test_termios = orig_termios;
-
-  usage();
-  for(;;) {
-    switch( c = getchar() ) {
-      case '1':
-        printf( "\nResetting the line to the original termios setting\n\n" );
-        test_termios = orig_termios;
-        if( tcsetattr( fileno( stdin ), TCSADRAIN, &test_termios ) < 0 ) {
-          perror( "tcsetattr() failed" );
-          rtems_test_exit( 1 );
-        }
-        usage();
-        break;
-
-      case '2':
-        print_termios( &test_termios );
-        usage();
-        break;
-
-      case '3':
-        change_line_settings( &test_termios );
-        usage();
-        break;
-
-      case '4':
-        canonical_input( &test_termios );
-        usage();
-        break;
-
-      case '5':
-        raw_input( &test_termios );
-        usage();
-        break;
-
-      case '9':
-        rtems_test_exit( 1 );
-
-      case '\n':
-        break;
-          
-      default:
-        printf( "\n%c is not a valid choice. Try again\n\n", c );
-        usage();
-        break;
-    }
-  }
-}
-
