source: umon/ports/beagleboneblack/config.h @ 976c170

Last change on this file since 976c170 was 976c170, checked in by Jarielle Catbagan <jcatbagan93@…>, on Aug 7, 2015 at 6:04:18 PM

BBB: Clean up *.c and *.h files using 'astyle --unpad-paren --align-pointer=name --lineend=linux --add-brackets --convert-tabs -A4 <file>'

Note: <file> is the file being formatted

  • Property mode set to 100644
File size: 6.7 KB
Line 
1/*
2 * Monitor configuration file for the Beaglebone Black
3 *
4 * Adapted by Jarielle Catbagan
5 * email: jcatbagan93@gmail.com
6 *
7 *
8 * General notice:
9 * This code is part of a boot-monitor package developed as a generic base
10 * platform for embedded system designs.  As such, it is likely to be
11 * distributed to various projects beyond the control of the original
12 * author.  Please notify the author of any enhancements made or bugs found
13 * so that all may benefit from the changes.  In addition, notification back
14 * to the author will allow the new user to pick up changes that may have
15 * been made by other users after this version of the code was distributed.
16 *
17 * Author:  Ed Sutter
18 * email:   esutter@lucent.com
19 * phone:   908-582-2351
20 */
21
22#include "am335x.h"
23
24/*
25 * The target_putchar() function also drops the character at the
26 * LCD...
27 */
28//#define MORE_PUTCHAR lcd_putchar
29//#define CONSOLE_UART_BASE (OMAP35XX_L4_IO_BASE+0x6C000)
30#define CONSOLE_UART_BASE UART0_BASE
31
32#define SIO_STEP                4
33#define IEN_DEFAULT             0x40
34#define MCTL_DEFAULT            0x01
35
36#define TIMER_TICKS_PER_MSEC    545000
37
38/* DEFAULT_ETHERADD & DEFAULT_IPADD:
39 * Refer to notes in ethernet.c function EthernetStartup() for details
40 * regarding the use of these definitions.
41 * DEFAULT_IPADD could be set to "DHCP" or "BOOTP" as well.
42 */
43#define DEFAULT_ETHERADD "00:30:23:40:00:"      // Cogent Block
44#define DEFAULT_IPADD    "192.168.254.110"
45
46#define CPU_LE
47
48// Establish a user defined function to be called when uMon
49// prints out the startup banner...
50// If this is defined, then the output similar to the following will
51// be printed just above the uMon header...
52//      Silicon ID: 1.0
53//      CPU Rev: 2, Variant: 1
54//      CM Rev: 1.0, PRM Rev: 1.0
55// #define USR_HEADER_FUNC show_revision
56
57/* Defining DONT_CENTER_MONHEADER eliminates the automatic centering
58 * of the monitor's startup banner...
59 */
60#define DONT_CENTER_MONHEADER
61
62/* XBUFCNT & RBUFCNT:
63 *  Number of transmit and receive buffers allocated to ethernet.
64 *  The total of XBUFCNT+RBUFCNT should not exceed MAXEBDS
65 */
66#define XBUFCNT     8
67#define RBUFCNT     8
68#define XBUFSIZE    2048
69#define RBUFSIZE    2048
70
71/* LOOPS_PER_SECOND:
72 * Approximately the size of a loop that will cause a 1-second delay.
73 * This can be guestimated or modified with the sleep -c command at the
74 * monitor command line.
75 */
76#define LOOPS_PER_SECOND        15000
77
78#define INCLUDE_NANDCMD         0
79
80#if INCLUDE_NANDCMD
81/* Needed for NAND to work with TFSRAM:
82 */
83#define NAND_TFS_BASE           0x10000     // base of TFS in NAND
84
85#define FLASHRAM_BASE           0x80300000
86#define FLASHRAM_END            0x8037ffff
87#define FLASHRAM_SECTORSIZE     0x00010000
88#define FLASHRAM_SPARESIZE      FLASHRAM_SECTORSIZE
89#define FLASHRAM_BANKNUM        1
90#define FLASHRAM_SECTORCOUNT    8
91#endif
92
93/* Flash bank configuration:
94 */
95#ifdef FLASHRAM_BASE
96#define FLASHBANKS              2
97#else
98#define FLASHBANKS              1
99#endif
100#define SINGLE_FLASH_DEVICE     1
101#define FLASH_COPY_TO_RAM       1
102#define FLASH_BANK0_BASE_ADDR   0x08000000
103#define FLASH_PROTECT_RANGE     "0-2"
104#define FLASH_BANK0_WIDTH       2
105#define FLASH_LARGEST_SECTOR    0x20000
106#define FLASH_LOOP_TIMEOUT      10000000
107#define BUFFERED_WRITE
108
109/* TFS definitions:
110 *  TFSSTART:       Base address in FLASH at which TFS starts.
111 *  TFSEND:         End address of TFS in FLASH.
112 *  TFSSPARE:       Location of sector that is used as the spare sector
113 *                  by TFS for defragmentation.
114 *  TFSSPARESIZE:   Size of the spare sector used by TFS for defragmentation.
115 *  TFSSECTORCOUNT: Number of eraseable sectors that TFS covers, not including
116 *                  the TFSSPARE sector.
117 */
118#define TFSSPARESIZE            FLASH_LARGEST_SECTOR
119#define TFS_DEVTOT              1
120#define TFSSTART                (FLASH_BANK0_BASE_ADDR+0x060000)
121//#define TFSEND                (FLASH_BANK0_BASE_ADDR+0x007dffff)  // 8MB Flash
122#define TFSEND                  (FLASH_BANK0_BASE_ADDR+0x00edffff)  // 16MB Flash
123//#define TFSEND                (FLASH_BANK0_BASE_ADDR+0x03dfffff)  // 64MB Flash
124#define TFSSPARE                (TFSEND+1)
125#define TFSSECTORCOUNT          ((TFSSPARE-TFSSTART)/0x20000)
126#define TFS_EBIN_ELFMSBIN       1
127#define TFS_VERBOSE_STARTUP     1
128#define TFS_ALTDEVTBL_BASE      &alt_tfsdevtbl_base
129
130/* Specify CPU/PLATFORM type and name so that common code can be used
131 * for a similar cpu, on different platforms.
132 * The 'TYPE' definition is used for ifdefs in the code and the 'NAME'
133 * is used for printfs in the code.
134 */
135#define CPU_TYPE        AM3358
136#define CPU_NAME        "TI AM3358 Cortex-A8"
137#define PLATFORM_TYPE   BEAGLEBONEBLACK
138#define PLATFORM_NAME   "Beaglebone Black"
139
140/* Specify the size of the memory block (in monitor space) that is to be
141 * allocated to malloc in the monitor.  Note that this size can be dynamically
142 * increased using the heap extension option in the heap command.
143 */
144#define ALLOCSIZE           1024    // (64*1024)
145#define MONSTACKSIZE        (16*1024)
146
147
148/* Specify inclusion of subsystems within the monitor here.
149 * Refer to comments in common/monitor/inc_check.h for details on
150 * each of these macros.
151 */
152
153#define INCLUDE_MEMTRACE        0
154#define INCLUDE_MEMCMDS         1
155#define INCLUDE_EDIT            0
156#define INCLUDE_DISASSEMBLER    0
157#define INCLUDE_UNZIP           0
158#define INCLUDE_ETHERNET        0
159#define INCLUDE_ICMP            0
160#define INCLUDE_TFTP            0
161#define INCLUDE_DHCPBOOT        0
162#define INCLUDE_TFS             0
163#define INCLUDE_TFSCLI          0
164#define INCLUDE_TFSAPI          0
165#define INCLUDE_TFSSCRIPT       0
166#define INCLUDE_TFSSYMTBL       0
167#define INCLUDE_XMODEM          1
168#define INCLUDE_LINEEDIT        0
169#define INCLUDE_EE              0
170#define INCLUDE_FLASH           0
171#define INCLUDE_STRACE          0
172#define INCLUDE_CAST            0
173#define INCLUDE_STRUCT          0
174#define INCLUDE_REDIRECT        0
175#define INCLUDE_QUICKMEMCPY     0
176#define INCLUDE_PROFILER        0
177#define INCLUDE_BBC             0
178#define INCLUDE_STOREMAC        0
179#define INCLUDE_SHELLVARS       0
180#define INCLUDE_MALLOC          0
181#define INCLUDE_PORTCMD         0
182#define INCLUDE_SYSLOG          0
183#define INCLUDE_HWTMR           0
184#define INCLUDE_VERBOSEHELP     0
185#define INCLUDE_GDB             0
186#define INCLUDE_USRLVL          0
187#define INCLUDE_JFFS2           0
188#define INCLUDE_JFFS2ZLIB       0
189#define INCLUDE_FBI             0
190#define INCLUDE_TSI             0
191#define INCLUDE_SD              1
192#define INCLUDE_DNS             0
193#define INCLUDE_BLINKLED        1
194#define TARGET_BLINKLED         target_blinkled
195
196/* Inclusion of this next file will make sure that all of the above
197 * inclusions are legal; and warn/adjust where necessary.
198 */
199#include "inc_check.h"
Note: See TracBrowser for help on using the repository browser.