source: rtems/testsuites/mptests/mp14/evtask1.c @ ac7d5ef0

4.104.114.84.95
Last change on this file since ac7d5ef0 was ac7d5ef0, checked in by Joel Sherrill <joel.sherrill@…>, on 05/11/95 at 17:39:37

Initial revision

  • Property mode set to 100644
File size: 2.3 KB
RevLine 
[ac7d5ef0]1/*  Test_task
2 *
3 *  This task either continuously sends events to a remote task, or
4 *  continuously receives events sent by a remote task.  This decision
5 *  is based upon the local node number.
6 *
7 *  Input parameters:
8 *    argument - task argument
9 *
10 *  Output parameters:  NONE
11 *
12 *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
13 *  On-Line Applications Research Corporation (OAR).
14 *  All rights assigned to U.S. Government, 1994.
15 *
16 *  This material may be reproduced by or for the U.S. Government pursuant
17 *  to the copyright license under the clause at DFARS 252.227-7013.  This
18 *  notice must appear in all copies of this file and its derivatives.
19 *
20 *  $Id$
21 */
22
23#include "system.h"
24
25extern rtems_multiprocessing_table Multiprocessing_configuration;
26
27rtems_task Test_task(
28  rtems_task_argument argument
29)
30{
31  rtems_status_code status;
32  rtems_unsigned32  count;
33  rtems_unsigned32  remote_node;
34  rtems_id          remote_tid;
35  rtems_event_set   event_out;
36
37  remote_node = ((Multiprocessing_configuration.node == 1) ? 2 : 1);
38
39  puts( "About to go to sleep!" );
40  status = rtems_task_wake_after( TICKS_PER_SECOND );
41  directive_failed( status, "rtems_task_wake_after" );
42  puts( "Waking up!" );
43
44  puts_nocr( "Remote task's name is : " );
45  put_name( Task_name[ remote_node ], TRUE );
46
47  puts( "Getting TID of remote task" );
48  while ( FOREVER ) {
49    status = rtems_task_ident(
50      Task_name[ remote_node ],
51      RTEMS_SEARCH_ALL_NODES,
52      &remote_tid
53    );
54
55    if ( status == RTEMS_SUCCESSFUL )
56      break;
57    puts( "rtems_task_ident" );
58  }
59
60  if ( Multiprocessing_configuration.node == 1 ) {
61    puts( "Sending events to remote task" );
62    while ( Stop_Test == FALSE ) {
63      for ( count=EVENT_TASK_DOT_COUNT; Stop_Test == FALSE && count; count-- ) {
64        status = rtems_event_send( remote_tid, RTEMS_EVENT_16 );
65        directive_failed( status, "rtems_event_send" );
66     }
67     put_dot( 'e' );
68    }
69  }
70
71  puts( "Receiving events from remote task" );
72  while ( Stop_Test == FALSE ) {
73    for ( count=EVENT_TASK_DOT_COUNT ; Stop_Test == FALSE && count ; count-- ) {
74      status = rtems_event_receive(
75        RTEMS_EVENT_16,
76        RTEMS_DEFAULT_OPTIONS,
77        RTEMS_NO_TIMEOUT,
78        &event_out
79      );
80      directive_failed( status, "rtems_event_receive" );
81    }
82    put_dot( 'e' );
83  }
84
85  Exit_test();
86}
Note: See TracBrowser for help on using the repository browser.