source: rtems/testsuites/libtests/ChangeLog @ b013e6d

4.11
Last change on this file since b013e6d was b013e6d, checked in by Ralf Corsepius <ralf.corsepius@…>, on Jul 30, 2010 at 4:00:20 AM

2010-06-23 Ralf Corsépius <ralf.corsepius@…>

  • configure.ac: autoconf >= 2.65, automake >= 1.11.
  • Property mode set to 100644
File size: 42.2 KB
Line 
12010-07-29      Ralf Corsépius <ralf.corsepius@rtems.org>
2
3        * tar01/Makefile.am, tar02/Makefile.am:
4        Eliminate stamp-fs-tar. Reorder CLEANFILES.
5        Apply BIN2C -C/-H.
6
72010-07-29      Joel Sherrill <joel.sherrilL@OARcorp.com>
8
9        * tar01/Makefile.am, tar02/Makefile.am: Fix dependencies for parallel
10        build.
11
122010-07-29      Ralf Corsépius <ralf.corsepius@rtems.org>
13
14        * tar01/Makefile.am, tar02/Makefile.am: Replace mkdir cascade
15        with $(MKDIR_P).
16
172010-07-29      Ralf Corsépius <ralf.corsepius@rtems.org>
18
19        * tar01/Makefile.am, tar02/Makefile.am: Misc. fixes.
20
212010-07-29      Ralf Corsépius <ralf.corsepius@rtems.org>
22
23        * tar01/Makefile.am, tar03/Makefile.am: Remove MANAGERS.
24
252010-07-27      Joel Sherrill <joel.sherrill@oarcorp.com>
26
27        PR 1532/testing
28        * Makefile.am, configure.ac: Add initial tests for untar capabilities.
29        * tar01/.cvsignore, tar01/Makefile.am, tar01/init.c, tar01/tar01.doc,
30        tar01/tar01.scn, tar02/.cvsignore, tar02/Makefile.am, tar02/init.c,
31        tar02/tar02.doc, tar02/tar02.scn: New files.
32
332010-07-27      Bharath Suri <bharath.s.jois@gmail.com>
34
35        PR 1631/testing
36        * gxx02/init.c, gxx02/gxx02.scn, gxx02/gxx02.doc,
37        gxx02/Makefile.am, gxx02/gxx_wrappers.h: New test added
38        * Makefile.am, configure.ac: Changes to accommodate new tests
39
402010-07-27      Joel Sherrill <joel.sherrill@oarcorp.com>
41
42        PR 1632/testing
43        * Makefile.am, configure.ac: Make dedicated fatal error test for
44        /dev/null already registered. Using code from Bharath in new test
45        framework.
46        * devnullfatal01/.cvsignore, devnullfatal01/Makefile.am,
47        devnullfatal01/devnullfatal01.doc, devnullfatal01/devnullfatal01.scn,
48        devnullfatal01/testcase.h: New files.
49
502010-07-27      Bharath Suri <bharath.s.jois@gmail.com>
51
52        PR 1632/testing
53        * devfs04/init.c, devfs04/test_driver.c: Added cases to exercise
54        null_initialize() and null_write().
55
562010-07-25      Joel Sherrill <joel.sherrill@oarcorp.com>
57
58        * gxx01/gxx01.scn, gxx01/init.c: Remove local _exit().
59
602010-07-25      Joel Sherrill <joel.sherrill@oarcorp.com>
61
62        * gxx01/gxx01.scn, gxx01/init.c: Add test f0r rtems_gxx_key_dtor().
63
642010-07-25      Joel Sherrill <joel.sherrill@oarcorp.com>
65
66        * gxx01/gxx01.scn, gxx01/init.c: Add more testcases.
67
682010-07-22      Bharath Suri <bharath.s.jois@gmail.com>
69
70        * devfs02/init.c, devfs02/devfs02.doc, devfs02/devfs02.scn,
71        devfs02/Makefile.am: New tests added
72        * devfs03/init.c, devfs03/devfs03.doc, devfs03/devfs03.scn,
73        devfs03/Makefile.am: New tests added
74        * devfs04/init.c, devfs04/devfs04.doc, devfs04/devfs04.scn,
75        devfs04/Makefile.am: New tests added
76        * Makefile.am, configure.ac: Changes to accommodate the above
77        newly added tests.
78
792010-07-19      Joel Sherrill <joel.sherrill@oarcorp.com>
80
81        * Makefile.am, configure.ac, termios06/init.c: Add initial tests for
82        XON/XOFF and VMIN/VMAX cases.
83        * termios07/.cvsignore, termios07/Makefile.am, termios07/init.c,
84        termios07/termios07.doc, termios07/termios07.scn,
85        termios08/.cvsignore, termios08/Makefile.am, termios08/init.c,
86        termios08/termios08.doc, termios08/termios08.scn: New files.
87
882010-07-19      Joel Sherrill <joel.sherrill@oarcorp.com>
89
90        * Makefile.am, configure.ac: Add tar test for error cases.
91        * tar03/.cvsignore, tar03/Makefile.am, tar03/init.c, tar03/tar03.doc,
92        tar03/tar03.scn: New files.
93
942010-07-19      Joel Sherrill <joel.sherrill@oarcorp.com>
95
96        * stringto01/init.c, stringto01/stringto01.scn,
97        stringto01/stringto_test_template.h: Attempt to pick up a few more
98        error paths.
99
1002010-07-15      Bharath Suri <bharath.s.jois@gmail.com>
101
102        PR 1617/testing
103        * malloctest/init.c: Added new case to exercise _realloc_r.
104
1052010-07-15      Sebastian Huber <sebastian.huber@embedded-brains.de>
106
107        * malloctest/init.c: Added test for
108        rtems_heap_allocate_aligned_with_boundary().
109
1102010-07-14      Joel Sherrill <joel.sherrill@oarcorp.com>
111
112        * Makefile.am, configure.ac: Add new test to exercise devFS_Show().
113        * devfs01/.cvsignore, devfs01/Makefile.am, devfs01/devfs01.doc,
114        devfs01/devfs01.scn, devfs01/init.c: New files.
115
1162010-07-14      Joel Sherrill <joel.sherrill@oarcorp.com>
117
118        * Makefile.am, configure.ac: Add new test to exercise
119        malloc_get_statistics().
120        * malloc05/.cvsignore, malloc05/Makefile.am, malloc05/init.c,
121        malloc05/malloc05.doc, malloc05/malloc05.scn: New files.
122
1232010-07-14      Joel Sherrill <joel.sherrill@oarcorp.com>
124
125        PR 1535/tests
126        * malloc04/init.c, malloc04/malloc04.scn: Address issues in test. A mix
127        of work by Ralf and Joel.
128
1292010-07-14      Joel Sherrill <joel.sherrill@oarcorp.com>
130
131        * termios01/init.c, termios01/termios01.scn: Fully exercise tcsetattr.
132
1332010-07-08      Joel Sherrill <joel.sherrill@oarcorp.com>
134
135        * Makefile.am, configure.ac: Add test for exercising sbrk() extension
136        to Malloc Family.
137        * malloc04/.cvsignore, malloc04/Makefile.am, malloc04/init.c,
138        malloc04/malloc04.doc, malloc04/malloc04.scn: New files.
139
1402010-07-06      Joel Sherrill <joel.sherrilL@OARcorp.com>
141
142        * termios06/init.c, termios06/termios06.scn: Add a couple more PPPDISC
143        cases. Coverage of these paths is near complete.
144
1452010-07-05      Joel Sherrill <joel.sherrill@oarcorp.com>
146
147        * malloctest/system.h: Enable malloc statistics.
148
1492010-07-05      Joel Sherrill <joel.sherrill@oarcorp.com>
150
151        * Makefile.am, configure.ac: tar01 and tar02 not merged yet.
152
1532010-07-05      Joel Sherrill <joel.sherrill@oarcorp.com>
154
155        * Makefile.am, configure.ac, malloc03/init.c: Add test for PPPDDISC.
156        * termios06/.cvsignore, termios06/Makefile.am, termios06/init.c,
157        termios06/termios06.doc, termios06/termios06.scn,
158        termios06/test_pppd.c: New files.
159
1602010-07-01      Joel Sherrill <joel.sherrill@oarcorp.com>
161
162        * Makefile.am, configure.ac: Add test for GCC C++ library helpers.
163        * gxx01/.cvsignore, gxx01/Makefile.am, gxx01/gxx01.doc,
164        gxx01/gxx01.scn, gxx01/gxx_wrappers.h, gxx01/init.c: New files.
165
1662010-07-01      Joel Sherrill <joel.sherrill@oarcorp.com>
167
168        * termios04/termios_testdriver_intr.c: Task driven IO now works.
169
1702010-07-01      Joel Sherrill <joel.sherrill@oarcorp.com>
171
172        * Makefile.am, configure.ac: Add test for task driven drivers.
173        * termios05/.cvsignore, termios05/Makefile.am, termios05/init.c,
174        termios05/termios05.doc, termios05/termios05.scn,
175        termios05/termios_testdriver_taskdriven.c,
176        termios05/termios_testdriver_taskdriven.h: New files.
177
1782010-06-28      Joel Sherrill <joel.sherrill@oarcorp.com>
179
180        * Makefile.am, configure.ac: Revert changes related to uncommitted test
181        under development.
182
1832010-06-28      Joel Sherrill <joel.sherrill@oarcorp.com>
184
185        * Makefile.am, configure.ac, malloctest/init.c, termios03/init.c,
186        termios03/termios03.scn: Handle some of the VKILL and VERASE cases.
187
1882010-06-28      Joel Sherrill <joel.sherrill@oarcorp.com>
189
190        * Makefile.am, configure.ac: Add new test to exercise termios RX and TX
191        interrupt driven IO support.
192        * termios04/.cvsignore, termios04/Makefile.am, termios04/init.c,
193        termios04/termios04.doc, termios04/termios04.scn,
194        termios04/termios_testdriver_intr.c,
195        termios04/termios_testdriver_intr.h: New files.
196
1972010-06-28      Joel Sherrill <joel.sherrill@oarcorp.com>
198
199        * termios03/init.c, termios03/termios03.doc, termios03/termios03.scn,
200        termios03/termios_testdriver_polled.c,
201        termios03/termios_testdriver_polled.h: Add more test cases.
202
2032010-06-28      Joel Sherrill <joel.sherrill@oarcorp.com>
204
205        * malloc02/Makefile.am, malloc03/Makefile.am: Tests do not need spin.c
206
2072010-06-25      Joel Sherrill <joel.sherrill@oarcorp.com>
208
209        * termios03/.cvsignore, termios03/Makefile.am, termios03/init.c,
210        termios03/termios03.doc, termios03/termios03.scn,
211        termios03/termios_testdriver_polled.c,
212        termios03/termios_testdriver_polled.h: New files.
213        * Makefile.am, configure.ac: Add initial version of new test for polled
214        IO support in termios.
215
2162010-06-23      Joel Sherrill <joel.sherrilL@OARcorp.com>
217
218        * block01/Makefile.am, block02/Makefile.am, block03/Makefile.am,
219        block04/Makefile.am, block05/Makefile.am, block06/Makefile.am,
220        block07/Makefile.am, block08/Makefile.am, block09/Makefile.am,
221        block10/Makefile.am, bspcmdline01/Makefile.am, cpuuse/Makefile.am,
222        heapwalk/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
223        monitor02/Makefile.am, putenvtest/Makefile.am, rtems++/Makefile.am,
224        rtmonuse/Makefile.am, stackchk/Makefile.am, stackchk01/Makefile.am,
225        stringto01/Makefile.am, termios/Makefile.am, termios01/Makefile.am,
226        termios02/Makefile.am: Revert.
227
2282010-06-23      Joel Sherrill <joel.sherrilL@OARcorp.com>
229
230        * termios01/termios01.scn: Fix bug so existing test code for
231        rtems_termios_baud_to_index() is executed.
232
2332010-06-23      Joel Sherrill <joel.sherrilL@OARcorp.com>
234
235        * block01/Makefile.am, block02/Makefile.am, block03/Makefile.am,
236        block04/Makefile.am, block05/Makefile.am, block06/Makefile.am,
237        block07/Makefile.am, block08/Makefile.am, block09/Makefile.am,
238        block10/Makefile.am, bspcmdline01/Makefile.am, cpuuse/Makefile.am,
239        heapwalk/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
240        monitor02/Makefile.am, putenvtest/Makefile.am, rtems++/Makefile.am,
241        rtmonuse/Makefile.am, stackchk/Makefile.am, stackchk01/Makefile.am,
242        stringto01/Makefile.am, termios/Makefile.am, termios01/Makefile.am,
243        termios01/init.c, termios02/Makefile.am: Fix bug so existing test
244        code for rtems_termios_baud_to_index() is executed.
245
2462010-06-22      Joel Sherrill <joel.sherrilL@OARcorp.com>
247
248        * stackchk/blow.c, stackchk/stackchk.scn: Print a stack check report
249        before blowing stack.
250
2512010-06-22      Jennifer Averett <Jennifer.Averett@OARcorp.com>
252
253        * Makefile.am, configure.ac: Added test that attempts to free stack
254        memory. This causes a error to be printed from the free function.
255        * malloc03/.cvsignore, malloc03/Makefile.am, malloc03/init.c,
256        malloc03/malloc03.doc, malloc03/malloc03.scn: New files.
257
2582010-06-22      Jennifer Averett <Jennifer.Averett@OARcorp.com>
259
260        * malloctest/init.c: Added error case with malloc of size 0.
261
2622010-06-22      Jennifer Averett <Jennifer.Averett@OARcorp.com>
263
264        * malloctest/init.c: Added test to check failure branch on calloc.
265
2662010-06-21      Joel Sherrill <joel.sherrill@oarcorp.com>
267
268        * malloc02/init.c, malloc02/malloc02.doc: Enable malloc dirty helper.
269
2702010-06-21      Joel Sherrill <joel.sherrill@oarcorp.com>
271
272        * Makefile.am, configure.ac: Add test for deferring free() from ISR and
273        for deferred free() processing.
274        * malloc02/.cvsignore, malloc02/Makefile.am, malloc02/init.c,
275        malloc02/malloc02.doc, malloc02/malloc02.scn: New files.
276
2772010-06-07      Joel Sherrill <joel.sherrill@oarcorp.com>
278
279        * termios01/init.c, termios01/termios01.scn, termios02/init.c,
280        termios02/termios02.scn: Add tests for cfigetspeed(), cfogetspeed(),
281        cfisetspeed(), cfosetspeed(), ctermid(), tcflow(), tcflush(),
282        tcsendbreak(), tcsetpgrp(), and tcgetpgrp(). Some of these methods
283        are minimal implementations so the tests will have to grow as the
284        methods grow.
285
2862010-06-07      Sebastian Huber <sebastian.huber@embedded-brains.de>
287
288        * heapwalk/init.c, malloctest/init.c: Update for heap extend changes.
289
2902010-05-17      Sebastian Huber <sebastian.huber@embedded-brains.de>
291
292        PR 1433/cpukit
293        * block08/bdbuf_tests.c: Enabled tests 1.1, 1.2 and 1.3.
294        * block08/bdbuf_test1_1.c, block08/bdbuf_test1_2.c,
295        block08/bdbuf_test1_3.c: Use RTEMS_IO_ERROR instead of
296        RTEMS_NO_MEMORY.
297
2982010-05-03      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
299
300        * block01/init.c, block02/init.c, block03/init.c, block04/init.c,
301        block05/init.c, block06/init.c, block07/init.c, block09/init.c,
302        block10/init.c: Changed CONFIGURE_MAXIMUM_SEMAPHORES defines.
303
3042010-05-01      Ralf Corsépius <ralf.corsepius@rtems.org>
305
306        * Makefile.am: Move POSIX in front of other tests.
307
3082010-04-25      Joel Sherrill <joel.sherrilL@OARcorp.com>
309
310        * bspcmdline01/init.c: Fix assert conditional.
311
3122010-04-11      Ralf Corsépius <ralf.corsepius@rtems.org>
313
314        * POSIX/flockfile.c, POSIX/funlockfile.c, POSIX/ftrylockfile.c: New.
315        * POSIX/Makefile.am: Add flockfile, funlockfile, ftrylockfile.
316
3172010-02-26      Joel Sherrill <joel.sherrill@oarcorp.com>
318
319        * block10/.cvsignore: New file.
320
3212010-01-21      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
322
323        * block05/block05.png, block10/block10.doc, block10/init.c,
324        block10/.cvsignore, block10/block10.scn, block10/block10.png,
325        block10/Makefile.am: New files.
326        * configure.ac, Makefile.am: Update for new files.
327        * block05/block05.doc: Update for new state transitions.
328
3292010-01-20      Joel Sherrill <joel.sherrill@oarcorp.com>
330
331        * block08/.cvsignore, block09/.cvsignore: New files.
332
3332010-01-20      Joel Sherrill <joel.sherrill@oarcorp.com>
334
335        * block08/init.c: Remove warning.
336
3372010-01-20      Joel Sherrill <joel.sherrill@oarcorp.com>
338
339        * block08/block08.scn, block08/init.c: Add starting and ending messages
340        so the scripts detect successful exit.
341
3422010-01-18      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
343
344        * block09/block09.doc, block09/init.c, block09/.cvsignore,
345        block09/block09.scn, block09/Makefile.am: New files.
346        * configure.ac, Makefile.am: Update for new files.
347        * block05/block05.doc: Update for new state transitions.
348        * block05/init.c, block06/init.c: Update for block device API change.
349
3502010-01-18      Oleg Kravtsov <Oleg.Kravtsov@oktetlabs.ru>
351
352        * block08/bdbuf_test1_1.c, block08/bdbuf_test1_2.c,
353        block08/bdbuf_test1_3.c, block08/bdbuf_test1_4.c,
354        block08/bdbuf_test1_5.c, block08/bdbuf_test2_1.c,
355        block08/bdbuf_test2_2.c, block08/bdbuf_test3_1.c,
356        block08/bdbuf_test3_2.c, block08/bdbuf_test3_3.c,
357        block08/bdbuf_test4_1.c, block08/bdbuf_test4_2.c,
358        block08/bdbuf_test4_3.c, block08/bdbuf_tests.c, block08/bdbuf_tests.h,
359        block08/block08.doc, block08/block08.scn, block08/.cvsignore,
360        block08/init.c, block08/Makefile.am, block08/system.h,
361        block08/test_disk.c: New files.
362
3632009-12-28      Aanjhan Ranganathan <aanjhan@gmail.com>
364
365        * bspcmdline01/init.c, bspcmdline01/bspcmdline01.scn: Added test case
366        to cover the bsp_cmdline_get_param() routine.
367
3682009-12-21      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
369
370        * block06/init.c: Update for disk device API change.  Changed EBADRQC
371        to EINVAL.
372
3732009-12-10      Joel Sherrill <joel.sherrill@oarcorp.com>
374
375        * termios01/init.c: Increase number of termios ports by 1.
376
3772009-12-10      Ralf Corsépius <ralf.corsepius@rtems.org>
378
379        * termios01/termios_testdriver.c:
380        Reflect changes to rtems_termios_callbacks->write.
381
3822009-12-08      Joel Sherrill <joel.sherrill@oarcorp.com>
383
384        * block01/init.c, block02/init.c, block03/init.c, block04/init.c,
385        block05/init.c, block07/init.c, bspcmdline01/init.c,
386        stringto01/init.c, stringto01/stringto_test_template.h,
387        termios01/init.c, termios01/termios_testdriver.c, termios02/init.c:
388        Use rtems_test_assert() consistently instead of system assert().
389        rtems_test_assert() is designed to integrate into the RTEMS test
390        suite infrastructure.
391
3922009-12-06      Ralf Corsépius <ralf.corsepius@rtems.org>
393
394        * POSIX/Makefile.am: Add readv, writev.
395        * POSIX/writev.c, POSIX/readv.c: New.
396
3972009-12-04      Ralf Corsépius <ralf.corsepius@rtems.org>
398
399        * POSIX/sigfillset.c: Let main() return "status".
400        * POSIX/Makefile.am: Add sigaddset, sigdelset, sigemptyset,
401        sigismember.
402        * POSIX/sigaddset.c, POSIX/sigdelset.c, POSIX/sigemptyset.c,
403        POSIX/sigismember.c: New.
404
4052009-12-04      Ralf Corsépius <ralf.corsepius@rtems.org>
406
407        * POSIX/Makefile.am: Add wait.
408        * POSIX/wait.c: New.
409
4102009-12-03      Joel Sherrill <joel.sherrill@oarcorp.com>
411
412        * bspcmdline01/test.c: Removed.
413
4142009-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
415
416        * Makefile.am: Add POSIX.
417        * configure.ac: Add POSIX/.
418        * POSIX/calloc.c, POSIX/close.c, POSIX/COPYING, POSIX/dup2.c,
419        POSIX/fcntl.c, POSIX/fork.c, POSIX/free.c, POSIX/fstat.c,
420        POSIX/getdents.c, POSIX/getlogin.c, POSIX/getpwnam.c,
421        POSIX/getpwuid.c, POSIX/getuid.c, POSIX/issetugid.c,
422        POSIX/kill.c, POSIX/longjmp.c, POSIX/lseek.c, POSIX/lstat.c,
423        POSIX/Makefile.am, POSIX/Makefile.in, POSIX/malloc.c,
424        POSIX/nanosleep.c, POSIX/open.c, POSIX/pipe.c,
425        POSIX/posix_memalign.c, POSIX/read.c, POSIX/README,
426        POSIX/realloc.c, POSIX/setjmp.c, POSIX/sigfillset.c,
427        POSIX/sigprocmask.c, POSIX/stat.c, POSIX/unlink.c, POSIX/vfork.c,
428        POSIX/waitpid.c, POSIX/write.c: New.
429
4302009-12-02      Joel Sherrill <joel.sherrill@OARcorp.com>
431
432        * stringto01/init.c: New file.
433
4342009-12-01      Joel Sherrill <joel.sherrill@OARcorp.com>
435
436        * Makefile.am, configure.ac: Add string_to_xxx conversion test.
437        * stringto01/.cvsignore, stringto01/Makefile.am,
438        stringto01/stringto01.doc, stringto01/stringto01.scn,
439        stringto01/stringto_test_template.h: New files.
440
4412009-11-30      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
442
443        * block05/init.c: Check block size. Improved output.
444        * block01/init.c: Free ramdisk before exit.
445        * block01/block01.doc, block02/block02.doc, block03/block03.doc,
446        block04/block04.doc, block05/block05.doc, block06/block06.doc,
447        block07/block07.doc: New files.
448        * block01/Makefile.am, block02/Makefile.am, block03/Makefile.am,
449        block04/Makefile.am, block05/Makefile.am, block06/Makefile.am,
450        block07/Makefile.am: Add new files.
451
4522009-11-21      Joel Sherrill <joel.sherrill@oarcorp.com>
453
454        * block02/.cvsignore, block03/.cvsignore, block04/.cvsignore,
455        block05/.cvsignore, block06/.cvsignore, block07/.cvsignore: New files.
456        * block02/Makefile.in, block03/Makefile.in, block04/Makefile.in,
457        block05/Makefile.in, block06/Makefile.in, block07/Makefile.in: Removed.
458
4592009-11-16      Ralf Corsépius <ralf.corsepius@rtems.org>
460
461        * rtems++/Task3.cc: Use %zu instead of %i to print size_t's.
462        Remove bogus cast.
463        * rtems++/Task1.cc: Use %zu instead of %i to print size_t's.
464
4652009-11-14      Ralf Corsépius <ralf.corsepius@rtems.org>
466
467        * rtems++/Task1.cc: Eliminate more warnings.
468
4692009-11-14      Ralf Corsépius <ralf.corsepius@rtems.org>
470
471        * rtems++/Task1.cc, rtems++/Task2.cc: Spray PRI* macros to eliminate
472        several dozens of warnings.
473
4742009-11-13      Ralf Corsépius <ralf.corsepius@rtems.org>
475
476        * block06/init.c: Add missing prototype.
477
4782009-11-10      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
479
480        * block07/init.c: New test case.
481
4822009-11-09      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
483
484        * block05/init.c, block05/block05.scn, block05/Makefile.am,
485        block06/init.c, block06/block06.scn, block06/Makefile.am,
486        block07/init.c, block07/block07.scn, block07/Makefile.am: New files.
487        * Makefile.am, configure.ac: Added block05, block06 and block07.
488
4892009-11-01      Ralf Corsépius <ralf.corsepius@rtems.org>
490
491        * termios/init.c: Remove sh2 hacks.
492
4932009-10-30      Ralf Corsépius <ralf.corsepius@rtems.org>
494
495        * block01/init.c: Include <stdio.h>.
496        * termios/init.c: Eliminate TRUE/FALSE, use bool instead of int.
497        * block02/init.c: Remove unused var.
498
4992009-10-29      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
500
501        * block02/init.c, block02/block02.scn, block02/Makefile.am,
502        block03/init.c, block03/block03.scn, block03/Makefile.am,
503        block04/init.c, block04/block04.scn, block04/Makefile.am: New files.
504        * Makefile.am, configure.ac: Added block02, block03 and block04.
505
5062009-10-29      Ralf Corsépius <ralf.corsepius@rtems.org>
507
508        * monitor02/init.c: Add local prototype for
509        rtems_shell_main_monitor.
510
5112009-10-27      Ralf Corsépius <ralf.corsepius@rtems.org>
512
513        * termios01/init.c: Fix parity_table_Entry type.
514        Correct parity_table initialization.
515        Add PRIdrtems_termios_baud_t.
516        Use PRIdrtems_termios_baud_t to print rtems_termios_baud_t's.
517
5182009-10-26      Ralf Corsépius <ralf.corsepius@rtems.org>
519
520        * rtmonuse/task1.c: Use PRIu32 to print uint32_t's.
521        * malloctest/init.c: Use %zu instead of %d to print size_t's.
522
5232009-10-26      Ralf Corsépius <ralf.corsepius@rtems.org>
524
525        * rtmonuse/init.c, rtmonuse/task1.c:
526        Use PRIxrtems_id to print rtems_ids.
527        * malloctest/init.c: Use %zu instead of %d to print size_t's.
528
5292009-10-26      Ralf Corsépius <ralf.corsepius@rtems.org>
530
531        * malloctest/init.c: Fix _Heap_Resize_block args.
532
5332009-10-26      Ralf Corsépius <ralf.corsepius@rtems.org>
534
535        * malloctest/init.c, termios01/init.c,
536        termios01/termios_testdriver.c: Eliminate unused vars.
537
5382009-10-26      Ralf Corsépius <ralf.corsepius@rtems.org>
539
540        * heapwalk/init.c: Comment out unused vars.
541        * termios01/termios_testdriver.c: Include <rtems/termiostypes.h.
542        * malloctest/init.c: Add local prototype for malloc_walk,
543        malloc_info.
544        * malloctest/task1.c: Add local prototype for malloc_walk.
545        * monitor02/init.c: Remove unused vars.
546        * stackchk01/init.c: Remove unused vars.
547        * heapwalk/init.c, malloctest/init.c, stackchk/blow.c,
548        termios/init.c: Add missing prototypes.
549
5502009-10-20      Ralf Corsépius <ralf.corsepius@rtems.org>
551
552        * configure.ac: Don't add -fasm to CFLAGS.
553
5542009-10-19      Joel Sherrill <joel.sherrill@oarcorp.com>
555
556        * block01/.cvsignore: New file.
557
5582009-10-19      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
559
560        * block01/init.c, block01/block01.scn, block01/Makefile.am: New files.
561        * Makefile.am, configure.ac: Added block01.
562
5632009-10-12      Joel Sherrill <joel.sherrill@OARcorp.com>
564
565        * cpuuse/init.c, cpuuse/system.h: Use minimum stack size.
566
5672009-10-01      Joel Sherrill <joel.sherrill@oarcorp.com>
568
569        * Makefile.am, configure.ac, termios01/termios_testdriver.c: Do not use
570        CONSOLE_USE_INTERRUPTS. That is in use by BSPs and we should not use
571        it.
572        * termios02/.cvsignore, termios02/Makefile.am, termios02/init.c,
573        termios02/termios02.doc, termios02/termios02.scn: New files.
574        termios02 is a test for tcdrain().
575
5762009-10-01      Ralf Corsépius <ralf.corsepius@rtems.org>
577
578        * termios01/init.c, termios01/termios_testdriver.c:
579        Reflect changes to termios.
580
5812009-09-26      Joel Sherrill <joel.sherrill@oarcorp.com>
582
583        * cpuuse/tswitch.c: Eliminate use of deprecated rtems_extension.
584
5852009-09-24      Joel Sherrill <joel.sherrill@OARcorp.com>
586
587        * stackchk01/stackchk01.doc: Add content.
588
5892009-09-21      Joel Sherrill <joel.sherrill@OARcorp.com>
590
591        * Makefile.am, configure.ac: Add initial test for
592        rtems_stack_checker_is_blown.
593        * stackchk01/.cvsignore, stackchk01/Makefile.am, stackchk01/init.c,
594        stackchk01/stackchk01.doc, stackchk01/stackchk01.scn: New files.
595
5962009-09-09      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
597
598        * heapwalk/heapwalk.scn, heapwalk/init.c: Add missing _Heap_Walk test
599        cases to get back to 100% object coverage.
600
6012009-09-09      Christian Mauderer <christian.mauderer@embedded-brains.de>
602
603        * heapwalk/init.c, heapwalk/heapwalk.scn, malloctest/init.c,
604        malloctest/malloctest.scn: New test cases.
605        * stackchk/blow.c, stackchk/stackchk.scn: Update for heap API changes.
606
6072009-09-03      Christian Mauderer <christian.mauderer@embedded-brains.de>
608
609        * malloctest/init.c: New test cases. Update for heap API changes.
610        * stackchk/blow.c: Update for heap API changes.
611
6122009-08-19      Sebastian Huber <Sebastian.Huber@embedded-brains.de>
613
614        * heapwalk/init.c, stackchk/blow.c: Update for heap API changes.
615
6162009-08-15      Joel Sherrill <joel.sherrill@oarcorp.com>
617
618        * termios01/init.c, termios01/termios01.scn: Add a few error paths to
619        complete coverage of termios_XXX_to_YYY() methods.
620
6212009-08-15      Joel Sherrill <joel.sherrill@oarcorp.com>
622
623        * Makefile.am, configure.ac: Add new test to exercise tcgetattr and
624        tcsetattr. Does a variety of baud, parity, stop bits, and bits per
625        character with the assistance of a special test driver which prints
626        the requests.
627        * termios01/.cvsignore, termios01/Makefile.am, termios01/init.c,
628        termios01/termios01.doc, termios01/termios01.scn,
629        termios01/termios_testdriver.c, termios01/termios_testdriver.h: New files.
630
6312009-08-12      Joel Sherrill <joel.sherrill@oarcorp.com>
632
633        * malloctest/task1.c, stackchk/task1.c: Eliminate test routines
634        TICKS_PER_SECOND and get_ticks_per_second() in favor of new
635        rtems_clock_get_ticks_per_second().
636
6372009-08-10      Joel Sherrill <joel.sherrill@oarcorp.com>
638
639        * cpuuse/task1.c, termios/init.c: Convert calls to legacy routine
640        rtems_clock_get( RTEMS_CLOCK_GET_xxx, ..) to rtems_clock_get_xxx().
641
6422009-08-10      Joel Sherrill <joel.sherrill@oarcorp.com>
643
644        * cpuuse/task1.c, cpuuse/tswitch.c, malloctest/task1.c,
645        stackchk/task1.c: Convert calls to legacy routine rtems_clock_get(
646        RTEMS_CLOCK_GET_TOD, ..) to rtems_clock_get_tod(..).
647
6482009-08-09      Joel Sherrill <joel.sherrill@oarcorp.com>
649
650        * malloctest/init.c: Adjust allocation in test so it passes now that
651        heap overhead constant has been increased.
652
6532009-08-06      Joel Sherrill <joel.sherrill@oarcorp.com>
654
655        * bspcmdline01/init.c: Do not violate visibility.
656
6572009-08-06      Joel Sherrill <joel.sherrill@oarcorp.com>
658
659        * bspcmdline01/bspcmdline01.scn, bspcmdline01/init.c: Add rtems_ as
660        prefix to all routines.
661
6622009-08-05      Joel Sherrill <joel.sherrill@oarcorp.com>
663
664        * Makefile.am, configure.ac: Add test for new BSP Boot Command Line
665        helper routines.
666        * bspcmdline01/.cvsignore, bspcmdline01/Makefile.am,
667        bspcmdline01/bspcmdline01.doc, bspcmdline01/bspcmdline01.scn,
668        bspcmdline01/init.c, bspcmdline01/test.c: New files.
669
6702009-07-09      Joel Sherrill <joel.sherrill@OARcorp.com>
671
672        * malloctest/init.c, malloctest/malloctest.scn: Add heap resize test
673        for shrinking a block enough to need to free the newly unused
674        portion.
675
6762009-07-08      Joel Sherrill <joel.sherrill@OARcorp.com>
677
678        * malloctest/init.c, malloctest/malloctest.scn: Add error cases for
679        _Protected_heap_Get_information().
680
6812009-06-10      Joel Sherrill <joel.sherrill@OARcorp.com>
682
683        * heapwalk/init.c: Add test code for first free block pointer not
684        aligned.
685
6862009-06-08      Joel Sherrill <joel.sherrill@OARcorp.com>
687
688        * heapwalk/init.c: Add more cases.
689
6902009-06-06      Joel Sherrill <joel.sherrill@oarcorp.com>
691
692        * heapwalk/init.c: Add more automated corruption capability.
693
6942009-06-05      Santosh G Vattam <vattam.santosh@gmail.com>
695
696        * heapwalk/heapwalk.scn, heapwalk/init.c: Add a test case.
697
6982009-05-19      Chris Johns <chrisj@rtems.org>
699
700        * cpuuse/tswitch.c: Lower sample count for small memory targets.
701        * cpuuse/system.h: Smaller stack size for small memory targets.
702        * monitor02/init.c: Cannot run on small memory targets.
703
7042009-05-17      Joel Sherrill <joel.sherrill@oarcorp.com>
705
706        * rtmonuse/init.c: Do not use Task_name array before initialized.
707
7082009-05-09      Joel Sherrill <joel.sherrill@oarcorp.com>
709
710        * malloctest/init.c: Fix warning.
711
7122009-05-07      Joel Sherrill <joel.sherrill@oarcorp.com>
713
714        * malloctest/init.c: Fix typo.
715
7162009-05-07      Joel Sherrill <joel.sherrill@oarcorp.com>
717
718        * Makefile.am, configure.ac: Add shell of heap walk test for Santosh.
719        * heapwalk/.cvsignore, heapwalk/Makefile.am, heapwalk/heapwalk.scn,
720        heapwalk/init.c, heapwalk/system.h: New files.
721
7222009-05-07      Santosh G Vattam <vattam.santosh@gmail.com>
723
724        * malloctest/init.c: Add test case for heap resize block when the
725        resize creates a free block large enough to free.
726
7272009-04-03      Ralf Corsépius <ralf.corsepius@rtems.org>
728
729        * cpuuse/Makefile.am, malloctest/Makefile.am,
730        monitor/Makefile.am, monitor02/Makefile.am,
731        putenvtest/Makefile.am, rtems++/Makefile.am,
732        rtmonuse/Makefile.am, stackchk/Makefile.am,
733        termios/Makefile.am, tztest/Makefile.am:
734        Eliminate _exe_/.exe.
735
7362009-02-11      Joel Sherrill <joel.sherrill@oarcorp.com>
737
738        * stackchk/stackchk.scn: Correct screen to match output.
739
7402008-12-15      Joel Sherrill <joel.sherrill@oarcorp.com>
741
742        * malloctest/init.c: Change sizes of heap/region and allocated objects
743        in heap to intptr_t so they can be larger than a single allocatable
744        object (e.g. size_t).
745
7462008-10-14      Joel Sherrill <joel.sherrill@oarcorp.com>
747
748        * malloctest/init.c: Do not generate alignment factors larger that will
749        not fit in a native integer.
750
7512008-09-17      Joel Sherrill <joel.sherrill@oarcorp.com>
752
753        * stackchk/system.h: Rename STACK_CHECKER_ON to more appropriate
754        CONFIGURE_STACK_CHECKER_ENABLED.
755
7562008-09-06      Ralf Corsépius <ralf.corsepius@rtems.org>
757
758        * malloctest/init.c: Convert to "bool".
759
7602008-06-17      Joel Sherrill <joel.sherrill@oarcorp.com>
761
762        * rtems++/System.h: Account for extra task stacks properly.
763
7642008-02-27      Joel Sherrill <joel.sherrill@oarcorp.com>
765
766        * malloctest/init.c: Fix return status check.
767
7682008-01-31      Joel Sherrill <joel.sherrill@OARcorp.com>
769
770        * cpuuse/init.c, malloctest/init.c, monitor/init.c, monitor02/init.c,
771        putenvtest/init.c, rtems++/Init.cc, rtmonuse/init.c, stackchk/init.c:
772        Change TEST_INIT to CONFIGURE_INIT. Make tmacros.h available to all
773        POSIX tests. Add a clock_settime case for < 1988.
774
7752008-01-31      Joel Sherrill <joel.sherrill@OARcorp.com>
776
777        * malloctest/init.c: Add more test cases to cover heap better.
778
7792008-01-31      Joel Sherrill <joel.sherrill@OARcorp.com>
780
781        * malloctest/init.c: Add new test cases per Sergei. Make some of the
782        stranger cases operate directly on a freshly initialized heap. This
783        should make them more reproducible.
784
7852008-01-29      Joel Sherrill <joel.sherrill@OARcorp.com>
786
787        * malloctest/init.c: Add more tests per suggestions from Sergei
788        Organov.
789
7902008-01-24      Joel Sherrill <joel.sherrill@oarcorp.com>
791
792        * malloctest/init.c: Add include to remove warning.
793
7942008-01-22      Joel Sherrill <joel.sherrill@OARcorp.com>
795
796        * malloctest/init.c: Remove debug print.
797
7982008-01-09      Joel Sherrill <joel.sherrill@OARcorp.com>
799
800        * monitor02/.cvsignore: New file.
801
8022008-01-09      Jennifer Averett <jennifer.averett@OARcorp.com>
803
804        * Makefile.am, configure.ac: Added automatic test for monitor shell
805        * monitor02/Makefile.am, monitor02/init.c, monitor02/monitor02.scn,
806        monitor02/system.h: New files.
807
8082007-12-20      Joel Sherrill <joel.sherrill@OARcorp.com>
809
810        * malloctest/init.c: Add test cases suggested by Sergei Organov
811        <s.organov@javad.com>.
812
8132007-12-19      Joel Sherrill <joel.sherrill@OARcorp.com>
814
815        * malloctest/init.c, malloctest/task1.c: Add test for posix_memalign.
816
8172007-12-14      Joel Sherrill <joel.sherrill@OARcorp.com>
818
819        * rtmonuse/init.c, rtmonuse/task1.c: Add period which is unused to
820        exericise another path in the period statistics code.
821
8222007-12-12      Joel Sherrill <joel.sherrill@OARcorp.com>
823
824        * malloctest/init.c: Add some primitive testing of realloc() which also
825        does some positive path testing on the SuperCore heap.
826
8272007-10-26      Glenn Humphrey <glenn.humphrey@OARcorp.com>
828
829        * cpuuse/task2.c, rtmonuse/rtmonuse.scn, rtmonuse/task1.c: Add new
830        cases for untested routines.
831
8322007-07-24      Joel Sherrill <joel.sherrill@oarcorp.com>
833
834        * cpuuse/init.c: Do not delete the Init task. Leaving it suspended lets
835        the CPU Usage Report include it. If it is deleted, the CPU time it
836        had consumed is not listed later in the report.
837
8382007-06-20      Joel Sherrill <joel.sherrill@oarcorp.com>
839
840        * tztest/init.c: Build when using buffered test IO.
841
8422007-05-17      Joel Sherrill <joel.sherrill@oarcorp.com>
843
844        * ChangeLog, rtmonuse/task1.c: Clean up output and use FLUSH_OUTPUT()
845        macro instead of fflush() directly.
846
8472007-05-15      Joel Sherrill <joel.sherrill@oarcorp.com>
848
849        * rtmonuse/init.c, rtmonuse/task1.c: Integrate Rate Monotonic
850        Statistics and Period Usage into Rate Monotonic Manager. Added the
851        following directives: rtems_rate_monotonic_get_statistics,
852        rtems_rate_monotonic_reset_statistics,
853        rtems_rate_monotonic_reset_all_statistics,
854        rtems_rate_monotonic_report_statistics, and rtems_object_get_name.
855        Obsoleted the rtems/rtmonuse.h file as a public interface.
856
8572007-05-11      Joel Sherrill <joel.sherrill@OARcorp.com>
858
859        * cpuuse/Makefile.am, malloctest/Makefile.am, putenvtest/Makefile.am,
860        rtmonuse/Makefile.am, stackchk/Makefile.am, termios/Makefile.am: Add
861        optional managers to Makefiles. Clean up test cases so last output
862        line follows END OF pattern. Make sure test case all run. All tests
863        appeared ok on sis.
864
8652007-03-29      Ralf Corsépius <ralf.corsepius@rtems.org>
866
867        * monitor/init.c, rtmonuse/task1.c: Use rtems_task_argument.
868
8692007-03-13      Joel Sherrill <joel@OARcorp.com>
870
871        * tztest/init.c: Call tzset() even though it may be called for us
872        implicitly along the way.
873
8742007-03-13      Joel Sherrill <joel@OARcorp.com>
875
876        * tztest/.cvsignore: New file.
877
8782007-03-13      Joel Sherrill <joel@OARcorp.com>
879
880        * Makefile.am, configure.ac: Added timezone test.
881        * tztest/Makefile.am, tztest/init.c, tztest/tztest.doc,
882        tztest/tztest.scn: New files.
883
8842007-03-05      Joel Sherrill <joel@OARcorp.com>
885
886        * malloctest/init.c: Be explicit about need for default and floating
887        point attributes. This is just a style change.
888
8892007-02-06      Joel Sherrill <joel@OARcorp.com>
890
891        * rtems++/Task1.cc, rtems++/Task3.cc: Address size_t/uint32_t typing
892        issues in message queue tests.
893
8942006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
895
896        * configure.ac: New BUG-REPORT address.
897
8982006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
899
900        * configure.ac: Require autoconf-2.60. Require automake-1.10.
901
9022006-07-11      Ralf Corsépius <ralf.corsepius@rtems.org>
903
904        * cpuuse/Makefile.am, malloctest/Makefile.am, rtems++/Makefile.am,
905        rtmonuse/Makefile.am, stackchk/Makefile.am: Eliminate scndir,
906        docdir. Use rtems_testsdir instead.
907
9082006-02-08      Joel Sherrill <joel@OARcorp.com>
909
910        * rtems++/Task1.cc: Fix warnings.
911
9122005-11-22      Ralf Corsepius <ralf.corsepius@rtems.org>
913
914        * configure.ac: Remove RTEMS_ENABLE_BARE,
915        BARE_CPU_CFLAGS, BARE_CPU_MODEL.
916
9172005-11-13      Ralf Corsepius <ralf.corsepius@rtems.org>
918
919        * cpuuse/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
920        putenvtest/Makefile.am, rtems++/Makefile.am, rtmonuse/Makefile.am,
921        stackchk/Makefile.am, termios/Makefile.am:
922        Convert to using *_PROGRAMS.
923
9242005-11-11      Ralf Corsepius <ralf.corsepius@rtems.org>
925
926        * cpuuse/Makefile.am, malloctest/Makefile.am,
927        monitor/Makefile.am, putenvtest/Makefile.am,
928        rtems++/Makefile.am, rtmonuse/Makefile.am,
929        stackchk/Makefile.am, termios/Makefile.am: Rework.
930
9312005-11-11      Ralf Corsepius <ralf.corsepius@rtems.org>
932
933        * cpuuse/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
934        putenvtest/Makefile.am, rtems++/Makefile.am, rtmonuse/Makefile.am,
935        stackchk/Makefile.am, termios/Makefile.am: Expand libtests.am.
936        * libtests.am: Remove.
937
9382005-11-09      Ralf Corsepius <ralf.corsepius@rtems.org>
939
940        * cpuuse/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
941        putenvtest/Makefile.am, rtems++/Makefile.am, rtmonuse/Makefile.am,
942        stackchk/Makefile.am, termios/Makefile.am:
943        AM_CPPFLAGS += -I..../support/include.
944
9452005-11-09      Ralf Corsepius <ralf.corsepius@rtems.org>
946
947        * configure.ac: Apply RTEMS_CHECK_CPUOPTS.
948        * libtests.am: Set project_bspdir=$(PROJECT_ROOT)
949
9502005-11-07      Ralf Corsepius <ralf.corsepius@rtems.org>
951
952        * libtests.am: Remove LIB_VARIANT.
953
9542005-11-07      Ralf Corsepius <ralf.corsepius@rtems.org>
955
956        * cpuuse/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
957        putenvtest/Makefile.am, rtems++/Makefile.am, rtmonuse/Makefile.am,
958        stackchk/Makefile.am, termios/Makefile.am: Remove SRC, PRINT_SRC.
959
9602005-11-07      Ralf Corsepius <ralf.corsepius@rtems.org>
961
962        * Makefile.am: Cleanup.
963
9642005-11-07      Ralf Corsepius <ralf.corsepius@rtems.org>
965
966        * libtests.am: Add $(PGM): ${ARCH}/$(dirstamp).
967        * cpuuse/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
968        putenvtest/Makefile.am, rtems++/Makefile.am, rtmonuse/Makefile.am,
969        stackchk/Makefile.am, termios/Makefile.am:
970        Partial conversion to automake.
971
9722005-01-06      Ralf Corsepius <ralf.corsepius@rtems.org>
973
974        * rtems++/Makefile.am: Remove LIB_VARIANT.
975
9762004-11-22      Ralf Corsepius <ralf.corsepius@rtems.org>
977
978        * configure.ac: Remove -ansi to prevent folks from further damaging
979        the code with broken prototypes.
980        * putenvtest/init.c: Remove broken putenv prototype.
981        * termios/init.c (print_c_cc): Don't loop over NCCS.
982
9832004-09-24      Ralf Corsepius <ralf.corsepius@rtems.org>
984
985        * configure.ac: Require automake > 1.9.
986
9872004-04-01      Ralf Corsepius <ralf.corsepius@rtems.org>
988
989        * cpuuse/system.h: Include <rtems/confdefs.h> instead of <confdefs.h>.
990        * malloctest/system.h: Include <rtems/confdefs.h> instead of <confdefs.h>.
991        * monitor/system.h: Include <rtems/confdefs.h> instead of <confdefs.h>.
992        * putenvtest/init.c: Include <rtems/confdefs.h> instead of <confdefs.h>.
993        * rtems++/System.h: Include <rtems/confdefs.h> instead of <confdefs.h>.
994        * rtmonuse/system.h: Include <rtems/confdefs.h> instead of <confdefs.h>.
995        * stackchk/system.h: Include <rtems/confdefs.h> instead of <confdefs.h>.
996        * termios/init.c: Include <rtems/confdefs.h> instead of <confdefs.h>.
997
9982004-03-30      Ralf Corsepius <ralf.corsepius@rtems.org>
999
1000        * cpuuse/system.h, cpuuse/task1.c, cpuuse/tswitch.c, monitor/init.c,
1001        monitor/system.h, rtems++/System.h, rtems++/Task1.cc,
1002        rtems++/Task2.cc, rtems++/Task3.cc, rtmonuse/init.c,
1003        rtmonuse/system.h, rtmonuse/task1.c, stackchk/blow.c: Convert to
1004        using c99 fixed size types.
1005
10062004-03-25      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1007
1008        * configure.ac: Add 2nd arg to RTEMS_TOP.
1009
10102004-01-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1011
1012        * cpuuse/Makefile.am: Re-add dirstamps to PRE/TMPINSTALL_FILES.
1013        Add PRE/TMPINSTALL_FILES to CLEANFILES.
1014        * malloctest/Makefile.am: Ditto.
1015        * monitor/Makefile.am: Ditto.
1016        * putenvtest/Makefile.am: Ditto.
1017        * rtems++/Makefile.am: Ditto.
1018        * rtmonuse/Makefile.am: Ditto.
1019        * stackchk/Makefile.am: Ditto.
1020        * termios/Makefile.am: Ditto.
1021
10222003-12-18      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1023
1024        * libtests.am: Add dirstamp support.
1025
10262003-12-17      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1027
1028        * libtests.am: Use $(mkdir_p) instead of $(mkinstalldirs).
1029
10302003-12-16      Joel Sherrill <joel@OARcorp.com>
1031
1032        PR 544/tests
1033        * malloctest/system.h, rtmonuse/system.h: Various modifications to make
1034        tests account for resources and not print at inappropriate times.
1035
10362003-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1037
1038        * configure.ac: Require automake >= 1.8, autoconf >= 2.59.
1039
10402003-12-01      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1041
1042        * cpuuse/Makefile.am: Remove all-local: $(ARCH).
1043        * malloctest/Makefile.am: Remove all-local: $(ARCH).
1044        * monitor/Makefile.am: Remove all-local: $(ARCH).
1045        * putenvtest/Makefile.am: Remove all-local: $(ARCH).
1046        * rtems++/Makefile.am: Remove all-local: $(ARCH).
1047        * rtmonuse/Makefile.am: Remove all-local: $(ARCH).
1048        * stackchk/Makefile.am: Remove all-local: $(ARCH).
1049        * termios/Makefile.am: Remove all-local: $(ARCH).
1050
10512003-11-10      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1052
1053        * configure.ac: Reflect having moved to testsuites/.
1054
10552003-10-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1056
1057        * configure.ac: Remove RTEMS_CANONICAL_HOST.
1058
10592003-10-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1060
1061        * configure.ac:Remove RTEMS_CHECK_CPU.
1062
10632003-09-04      Joel Sherrill <joel@OARcorp.com>
1064
1065        * cpuuse/init.c, cpuuse/system.h, cpuuse/task1.c, cpuuse/task2.c,
1066        cpuuse/task3.c, cpuuse/tswitch.c, malloctest/init.c,
1067        malloctest/system.h, malloctest/task1.c, monitor/init.c,
1068        monitor/system.h, putenvtest/init.c, rtems++/Init.cc,
1069        rtems++/System.h, rtems++/Task1.cc, rtems++/Task2.cc,
1070        rtems++/Task3.cc, rtems++/rtems++.doc, rtmonuse/getall.c,
1071        rtmonuse/init.c, rtmonuse/system.h, rtmonuse/task1.c,
1072        stackchk/blow.c, stackchk/init.c, stackchk/system.h,
1073        stackchk/task1.c: URL for license changed.
1074
10752003-08-18      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1076
1077        * Makefile.am: Reflect having moved aclocal/.
1078
10792003-08-16      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1080
1081        * Makefile.am: Reflect having moved automake/.
1082        * cpuuse/Makefile.am: Reflect having moved automake/.
1083        * malloctest/Makefile.am: Reflect having moved automake/.
1084        * monitor/Makefile.am: Reflect having moved automake/.
1085        * putenvtest/Makefile.am: Reflect having moved automake/.
1086        * rtems++/Makefile.am: Reflect having moved automake/.
1087        * rtmonuse/Makefile.am: Reflect having moved automake/.
1088        * stackchk/Makefile.am: Reflect having moved automake/.
1089        * termios/Makefile.am: Reflect having moved automake/.
1090
10912003-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1092
1093        * configure.ac: Use rtems-bugs@rtems.com as bug report email address.
1094
10952003-03-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1096
1097        * configure.ac: Remove AC_CONFIG_AUX_DIR.
1098
10992003-02-03      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1100
1101        * configure.ac: Unconditionally check for CXX.
1102        Require autoconf-2.57, automake-1.7.2.
1103        * rtems++: Eliminate CC_O_FILES.
1104
11052002-12-02      Joel Sherrill <joel@OARcorp.com>
1106
1107        * malloctest/init.c: Tasks should be floating point.
1108
11092002-10-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1110
1111        * .cvsignore: Reformat.
1112        Add autom4te*cache.
1113        Remove autom4te.cache.
1114
11152002-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1116
1117        * cpuuse/Makefile.am: Use $(OBJEXT) instead of .o.
1118        * malloctest/Makefile.am: Use $(OBJEXT) instead of .o.
1119        * monitor/Makefile.am: Use $(OBJEXT) instead of .o.
1120        * putenvtest/Makefile.am: Use $(OBJEXT) instead of .o.
1121        * rtems++/Makefile.am: Use $(OBJEXT) instead of .o.
1122        * rtmonuse/Makefile.am: Use $(OBJEXT) instead of .o.
1123        * stackchk/Makefile.am: Use $(OBJEXT) instead of .o.
1124        * termios/Makefile.am: Use $(OBJEXT) instead of .o.
1125
11262002-08-01      Joel Sherrill <joel@OARcorp.com>
1127
1128        * Per PR47 add support for buffered test output.  This involved
1129        adding defines to redirect output to a buffer and dump it when
1130        full, at "test pause", and at exit.  To avoid problems when redefining
1131        exit(), all tests were modified to call rtems_test_exit().
1132        Some tests, notable psxtests, had to be modified to include
1133        the standard test macro .h file (pmacros.h or tmacros.h) to
1134        enable this support.
1135        * cpuuse/task2.c, malloctest/task1.c, putenvtest/init.c,
1136        rtmonuse/task1.c, termios/init.c: Modified.
1137
11382002-04-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1139
1140        * configure.ac: Remove ENABLE_GCC28.
1141
11422002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1143
1144        * configure.ac:
1145        AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
1146        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
1147        * cpuuse/Makefile.am: Remove AUTOMAKE_OPTIONS.
1148        * Makefile.am: Remove AUTOMAKE_OPTIONS.
1149        * malloctest/Makefile.am: Remove AUTOMAKE_OPTIONS.
1150        * monitor/Makefile.am: Remove AUTOMAKE_OPTIONS.
1151        * putenvtest/Makefile.am: Remove AUTOMAKE_OPTIONS.
1152        * rtems++/Makefile.am: Remove AUTOMAKE_OPTIONS.
1153        * rtmonuse/Makefile.am: Remove AUTOMAKE_OPTIONS.
1154        * stackchk/Makefile.am: Remove AUTOMAKE_OPTIONS.
1155        * termios/Makefile.am: Remove AUTOMAKE_OPTIONS.
1156
11572001-11-01      Joel Sherrill <joel@OARcorp.com>
1158
1159        * rtems++/Makefile.am: Make sure debug variant of librtems++
1160        is linked against.  Reported by Jerry Needell <jerry.needell@unh.edu>
1161        and processed as PR78.
1162
11632001-10-25      Joel Sherrill <joel@OARcorp.com>
1164
1165        * rtems++/Makefile.am: Pick up -lrtems++ even when debug.
1166
11672001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1168
1169        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
1170        * configure.in: Remove.
1171        * configure.ac: New file, generated from configure.in by autoupdate.
1172
11732001-09-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1174
1175        * libtests.am: Use TMPINSTALL_FILES = to make automake-1.5 happy.
1176        * rtems++/Makefile.am: LD_FLAGS = -lrtems++.
1177
11782001-09-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1179
1180        * malloctest/Makefile.am: include leaf.am instead of leaf.cfg.
1181        * monitor/Makefile.am: include leaf.am instead of leaf.cfg.
1182        * termios/Makefile.am: include leaf.am instead of leaf.cfg.
1183        * putenvtest/Makefile.am: include leaf.am instead of leaf.cfg.
1184        * rtems++/Makefile.am: include leaf.am instead of leaf.cfg, use
1185        make-cxx-exe.
1186        * stackchk/Makefile.am: include leaf.am instead of leaf.cfg.
1187        * rtmonuse/Makefile.am: include leaf.am instead of leaf.cfg.
1188        * cpuuse/Makefile.am: include leaf.am instead of leaf.cfg.
1189
11902001-05-10      Ralf Corsepius  <corsepiu@faw.uni-ulm.de>
1191
1192        * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
1193
11942000-11-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1195
1196        * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
1197
11982000-11-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1199
1200        * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
1201
12022000-11-01      Joel Sherrill <joel@OARcorp.com>
1203
1204        * malloctest/task1.c: assoc.h, error.h, libio_.h, libio.h, and
1205        libcsupport.h moved from libc to lib/include/rtems and now must
1206        be referenced as <rtems/XXX.h>. 
1207
12082000-10-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1209
1210        * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
1211        Switch to GNU canonicalization.
1212        * libtests.am: Remove DEFS.
1213
12142000-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1215
1216        * cpuuse/Makefile.am, malloctest/Makefile.am, monitor/Makefile.am,
1217        putenvtest/Makefile.am, rtems++/Makefile.am, rtmonuse/Makefile.am,
1218        stackchk/Makefile.am, termios/Makefile.am: Include compile.am
1219
12202000-08-10      Joel Sherrill <joel@OARcorp.com>
1221
1222        * ChangeLog: New file.
Note: See TracBrowser for help on using the repository browser.