source: rtems/testsuites/configure.ac @ 0d44e251

5
Last change on this file since 0d44e251 was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 1.5 KB
Line 
1## Process this file with autoconf to produce a configure script.
2
3AC_PREREQ([2.69])
4AC_INIT([rtems-c-src-tests],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
5AC_CONFIG_SRCDIR([PROBLEMS])
6RTEMS_TOP([..],[])
7RTEMS_SOURCE_TOP
8RTEMS_BUILD_TOP
9
10RTEMS_CANONICAL_TARGET_CPU
11
12AM_INIT_AUTOMAKE([no-define foreign 1.12.2])
13AM_MAINTAINER_MODE
14
15RTEMS_ENABLE_TESTS
16RTEMS_ENABLE_CXX
17
18RTEMS_ENV_RTEMSBSP
19
20RTEMS_PROJECT_ROOT
21
22RTEMS_PROG_CC_FOR_TARGET
23RTEMS_PROG_CXX_FOR_TARGET
24RTEMS_CANONICALIZE_TOOLS
25AM_PROG_CC_C_O
26
27AC_ARG_ENABLE([ada],
28[AS_HELP_STRING(--enable-ada,enable Ada support)],
29[case "${enable_ada}" in
30  yes) ;;
31  no) ;;
32  *)  AC_MSG_ERROR(bad value ${enable_ada} for --enable-ada) ;;
33esac],[enable_ada=no])
34
35RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
36
37RTEMS_CHECK_CPUOPTS([RTEMS_POSIX_API])
38RTEMS_CHECK_CPUOPTS([RTEMS_MULTIPROCESSING])
39RTEMS_CHECK_CPUOPTS([RTEMS_NETWORKING])
40RTEMS_CHECK_CPUOPTS([RTEMS_SMP])
41
42case $enable_tests in
43yes | samples )
44  AC_CONFIG_SUBDIRS(samples)
45  ;;
46esac
47
48if test "$enable_tests" = "yes"; then
49  # do functionality tests first, then performance tests
50  AC_CONFIG_SUBDIRS(libtests sptests fstests psxtests)
51  if test "$rtems_cv_RTEMS_MULTIPROCESSING" = "yes"; then
52    AC_CONFIG_SUBDIRS(mptests)
53  fi
54  if test "$rtems_cv_RTEMS_SMP" = "yes"; then
55    AC_CONFIG_SUBDIRS(smptests)
56  fi
57  if test "$enable_ada" = "yes"; then
58    AC_CONFIG_SUBDIRS(ada)
59  fi
60  # Now do performance tests
61  AC_CONFIG_SUBDIRS(tmtests psxtmtests benchmarks rhealstone)
62fi
63
64# Explicitly list all Makefiles here
65AC_CONFIG_FILES([Makefile])
66AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.