1 | # |
---|
2 | # $Id$ |
---|
3 | # |
---|
4 | |
---|
5 | The tests were designed to operate in a very controlled environment. If |
---|
6 | one uses interrupt-driven console output, then tasks will block unexpectedly |
---|
7 | when a buffer filles and interrupts will perturb with the task execution order. |
---|
8 | |
---|
9 | The tmtests should only be run with all interrupt sources disabled using |
---|
10 | polled IO. |
---|
11 | |
---|
12 | The following is a list of reported failures from running the tests on |
---|
13 | a board with interrupt driven console IO. These problems do not |
---|
14 | occur when using polled IO. |
---|
15 | |
---|
16 | tm03, tm04, tm05, tm07, tm11, tm12, tm13, tm14, tm15, tm16, tm17, |
---|
17 | tm19, tm22, tm23, tm24 - All hit my breakpoint at |
---|
18 | _Internal_error_Occurred. |
---|
19 | |
---|
20 | tm20, tm27 - hang in middle of tests. |
---|
21 | tm26 - hangs at end of tests. |
---|
22 | |
---|
23 | sp02 - Gets through some tests, then attempts to execute code at |
---|
24 | location 0. |
---|
25 | sp04 - hangs at end of tests. |
---|
26 | sp06 - rtems_task_restart of TA3 FAILED -- expected (0) got (4) |
---|
27 | sp07, sp14 - hang in middle of tests |
---|
28 | sp13, sp15 - terminate properly, but output at end is missing. |
---|
29 | sp16 - _Internal_error_Occurred. |
---|
30 | sp19 - rtems_clock_get FAILED -- expected (0) got (11), and hangs in |
---|
31 | middle of test. |
---|
32 | |
---|
33 | cpuuse - hangs in middle of tests |
---|
34 | malloctest - prints nothing |
---|
35 | |
---|
36 | psx05 - Init: pthread_mutex_init - EINVAL (bad protocol) |
---|
37 | ../../../../../../../src/rtems-981001/c/src/tests/psxtests/psx05/../../../../../ |
---|
38 | ../../src/rtems-981001/c/src/tests/psxtests/psx05/task.c:35: |
---|
39 | failed assertion `status == EBUSY' |
---|
40 | N\: pthread_mutex_init - EINVAL (bad priority ceiling) |
---|
41 | |
---|
42 | |
---|