source: rtems/scripts/ChangeLog @ 0c42d6d

4.104.114.84.95
Last change on this file since 0c42d6d was 0c42d6d, checked in by Ralf Corsepius <ralf.corsepius@…>, on 04/12/05 at 08:46:58

2005-04-12 Ralf Corsepius <ralf.corsepius@…>

  • setup: Fixup messages.
  • Property mode set to 100644
File size: 43.4 KB
Line 
12005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
2
3        * setup: Fixup messages.
4
52005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
6
7        * binutils/target-binutils.add, cpukit/rtems-cpukit.add,
8        gcc3newlib/gccnewlib.add, gdb/gdb.add, rtemsdoc/rtemsdoc.add:
9        Remove Autoreqprov-tag.
10
112005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
12
13        * gcc3newlib/gccnewlib.add: Default to not building gcj for all gcc
14        versions. Cleanup comments.
15
162005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
17
18        * configure.ac, setup, setup.def, gcc3newlib/mkspec.in:
19        Use newlib_* instead of gcc3newlib_* for setup.* values.
20
212005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
22
23        * configure.ac, setup, setup.def, gcc3newlib/mkspec.in:
24        Use gcc_* instead of gcc3_* for setup.* values.
25
262005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
27
28        * binutils/binutils.add, gdb/gdb.add: Sync %setup with gcc/gcc.add
29        for consistency.
30
312005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
32
33        * binutils/binutils.add, gcc3newlib/gccnewlib.add, gdb/gdb.add:
34        Apply patches in tool subdirs.
35
362005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
37
38        * binutils/binutils.add, binutils/mkspec.in:
39        Eliminate @PATCH2@.
40        * gcc3newlib/gccnewlib.add, gcc3newlib/mkspec.in:
41        Eliminate @PATCH2@, @PATCH4@.
42        * gdb/gdb.add, gdb/mkspec.in:
43        Eliminate @PATCH2@.
44
452005-04-12      Ralf Corsepius <ralf.corsepius@rtems.org>
46
47        * binutils/binutils.add, gcc3newlib/gccnewlib.add,
48        gdb/gdb.add: Add support for rpmbuild --with sources.
49
502005-03-17      Ralf Corsepius <ralf.corsepius@rtems.org>
51
52        * gdb/Makefile.am: Add avr, mips64.
53        Cosmetics.
54        * gdb/base-gdb.add: Reflect gdb-6.3 not shipping mmalloc.info*.
55        * gdb/target-gdb.add: Add support for gcc-6.3's gdbtui.
56        * gdb/mkspec.in: Add PATCH-magic.
57        Add gdb_suffix.
58
592005-03-12      Ralf Corsepius <ralf.corsepius@rtems.org>
60
61        * binutils/binutils.add, binutils/mkspec.in, setup.def:
62        Add binutils_suffix.
63        * binutils/target-binutils.add: Preparations for binutils-2.16.
64
652005-02-24      Ralf Corsepius <ralf.corsepius@rtems.org>
66
67        * gcc3newlib/gccnewlib.add, gcc3newlib/mkspec.in, setup.def:
68        Add gcc_suffix. Add newlib_suffix.
69
702005-02-16      Ralf Corsepius <ralf.corsepius@rtems.org>
71
72        * autotools/automake-rtems.spec.in: automake-1.9.5.
73
742005-02-04      Ralf Corsepius <ralf.corsepius@rtems.org>
75
76        * gcc3newlib/Makefile.am: Remove sh-rtemself. Add sh-rtemscoff.
77
782005-01-17      Ralf Corsepius <ralf.corsepius@rtems.org>
79
80        * gcc3newlib/gccnewlib.add: Disable Ada (Stil broken with GCC-4.0.0).
81
822005-01-12      Ralf Corsepius <ralf.corsepius@rtems.org>
83
84        * gcc3newlib/gccnewlib.add: Change my email address.
85        Add tic4x-*.
86
872005-01-05      Ralf Corsepius <ralf.corsepius@rtems.org>
88
89        * autotools/automake-rtems.spec.in: automake-1.9.4.
90
912004-11-02      Joel Sherrill <joel@OARcorp.com>
92
93        * setup.def: Include PowerPC patch to make C++ global constructors work
94        -- gcc 3.3.5/newlib-1.12.0 revision 2.
95
962004-10-29      Joel Sherrill <joel@OARcorp.com>
97
98        * setup.def: Update gcc to 3.3.5 and binutils to 2.15.
99        * autotools/autoconf-rtems.spec.in: Temporarily do not include
100        some of the documentation since it causes the RPM build to fail.
101        * binutils/Makefile.am, gcc3newlib/Makefile.am: Add mips64-rtems.
102
1032004-09-29      Joel Sherrill <joel@OARcorp.com>
104
105        * buildall.in, buildalltar.in, binutils/Makefile.am,
106        cpukit/Makefile.am, gcc3newlib/Makefile.am, gcc3newlib/gccnewlib.add,
107        gdb/Makefile.am, rtems/Makefile.am, rtemsdoc/.cvsignore,
108        rtemsdoc/Makefile.am: i960 obsoleted.
109
1102004-09-24      Ralf Corsepius <ralf_corsepius@rtems.org>
111
112        * configure.ac: Require automake > 1.9.
113
1142004-09-23      Ralf Corsepius <ralf_corsepius@rtems.org>
115
116        * binutils/binutils.add: Rename package from binutils-collection to
117        binutils. Cleanups.
118        * binutils/target-binutils.add: Reflect changes above.
119        * binutils/Makefile.am: Add avr. Reflect changes above.
120        * autotools/autoconf-rtems.spec.in: Cleanup for chroot'ed builds.
121        * autotools/automake-rtems.spec.in: automake-1.9.2.
122        Cleanup for chroot'ed builds.
123        * gcc3newlib/Makefile.am: Add avr-rtems*gcc.
124        * gcc3newlib/gccnewlib.add: Disable c++ for avr.
125
1262004-07-29      Ralf Corsepius <ralf_corsepius@rtems.org>
127
128        * autotools/automake.spec.in: automake-1.9.
129
1302004-05-23      Joel Sherrill <joel@OARcorp.com>
131
132        * gcc3newlib/gccnewlib.add: gcc 3.4.0 is broken for embedded SPARC and
133        Ada. Until we can fix it, it is disabled.
134
1352004-05-23      Joel Sherrill <joel@OARcorp.com>
136
137        * gcc3newlib/target-gnat.add: Fix path to gnat1.
138
1392004-05-18      Ralf Corsepius <ralf_corsepius@rtems.org>
140
141        * binutils/Makefile.am: Add sh-rtemscoff.
142        Remove sh-rtemself.
143        * binutils/binutils.add: BuildRequires flex.
144        * autotools/automake-rtems.spec.in: Automake 1.8.5.
145
1462004-04-29      Ralf Corsepius <ralf_corsepius@rtems.org>
147
148        * gcc3newlib/gccnewlib.add: Another attempt to make *info.gz
149        handling more robust.
150
1512004-04-26      Ralf Corsepius <ralf_corsepius@rtems.org>
152
153        * autotools/automake-rtems.spec.in: Upgrade to 1.8.4.
154
1552004-03-26      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
156
157        * Index: base-g77.add, base-gcc.add, base-gcj.add, base-gnat.add,
158        gccnewlib.add, target-c++.add, target-gcc.add, target-gcj.add:
159        Apply _infodir, _mandir. Gzip man pages.
160        Reflect gcc having fixed gccinstall.info.
161
1622004-03-26      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
163
164        * binutils/base-binutils.add: Apply _infodir.
165        Don't install libiberty. Misc. cleanups.
166        * binutils/binutils.add: Apply _infodir, _mandir.
167        Don't install libiberty. Gzip man pages. Misc. cleanups.
168        * binutils/target-binutils.add: Apply _mandir.
169
1702004-03-25      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
171
172        * autotools/automake-rtems.spec.in: Upgrade to 1.8.3.
173
1742004-03-18      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
175
176        * gcc3newlib/gccnewlib.add: Disable gnats.
177        Further preparations for gcc-3.4.0
178        * gcc3newlib/base-gcc.add, gcc3newlib/target-gnat.add,
179        gcc3newlib/base-gcj.add, gcc3newlib/target-gcj.add:
180        Reflect changes to gcc3newlib/gccnewlib.add.
181
1822004-03-18      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
183
184        * gcc3newlib/base-gcc.add, gcc3newlib/target-g77.add,
185        gcc3newlib/target-objc.add: Preps for gcc-3.4.0.
186        Reflect changes to gcc3newlib/gccnewlib.add.
187
1882004-03-17      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
189
190        * gcc3newlib/target-gcc.add, gcc3newlib/target-c++.add:
191        Reflect changes to gcc3newlib/gccnewlib.add.
192
1932004-03-17      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
194
195        * gcc3newlib/gccnewlib.add: Preps. for gcc-3.4.0.
196        Add %gcclib, %gccexec.
197
1982004-03-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
199
200        * binutils/base-binutils.add: Preparations for binutils-2.15.
201
2022004-02-24      Joel Sherrill <joel@OARcorp.com>
203
204        PR 580/tools
205        * setup.def: Fix setup.def to match current reality.
206
2072004-02-23      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
208
209        * gdb/base-gdb.add: Add annotate.info.
210        * gdb/gdb.add: Remove info/dir.
211
2122004-02-20      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
213
214        * Makefile.am, gdb/Makefile.am: Cosmetics.
215
2162004-02-19      Joel Sherrill <joel@OARcorp.com>
217
218        * setup.def, gdb/gdb.add: gdb 6.0 RPMs built.
219
2202004-02-19      Joel Sherrill <joel@OARcorp.com>
221
222        * ChangeLog: Replace RTEMS user account with Joel.
223
2242004-02-17      Joel Sherrill <joel@oarcorp.com>
225
226        * setup.def, gdb/base-gdb.add, gdb/gdb.add: Building a gcc 3.2.3 i960
227        gcc and updating gdb to 5.3.
228
2292004-02-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
230
231        * configure.ac, setup, setup.def: Remove now unused vars.
232
2332004-02-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
234
235        * mkgccnewlibspec.in, gccnewlib/.cvsignore, gccnewlib/HISTORY,
236        gccnewlib/Makefile.am, gccnewlib/README, gccnewlib/base-chill.add,
237        gccnewlib/base-g77.add, gccnewlib/base-gcc.add, gccnewlib/base-gcj.add,
238        gccnewlib/gccnewlib.add, gccnewlib/header.add,
239        gccnewlib/target-chill.add, gccnewlib/target-g77.add,
240        gccnewlib/target-gcc.add, gccnewlib/target-gcj.add,
241        gccnewlib/target-objc.add: Remove (Obsolete).
242        * configure.ac, Makefile.am: Reflect changes above.
243
2442004-02-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
245
246        * gcc3newlib/gcc3newlib.add: Remove info/dir.
247        Cosmetics.
248
2492004-02-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
250
251        * setup.def: Adapt to what Joel already ships -
252        gcc3_version=3.3.2, gcc3_patch_version=20031216,
253        gcc3newlib_rpm_release=3
254
2552004-02-10      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
256
257        * configure.ac: Remove rtemsdoc/mkspec. Add RTEMS_RPM_RELEASE.
258        * rtemsdoc/.cvsignore: Reformat.
259        * Makefile.am: Reformat. Add RTEMS_RPM_RELEASE support to
260        rtems-source.add, Use rtems_source_spec_DEPS instead of
261        rtems_source_spec_DEPENDENCIES (Conflicts with automake internals).
262        * rtems/rtems-source.add: Add RTEMS_RPM_RELEASE.
263        * rtemsdoc/mkspec.in: Remove.
264        * rtemsdoc/Makefile.am: Reworked.
265        * rtemsdoc/header.add: Update Copyright notice.
266        * rtemsdoc/rtemsdoc.add: Add RTEMS_RPM_RELEASE.
267        Add %{rpmgroup}. Remove bzip-ing *.ps.
268        * rtemsdoc/supplement.add.in: Add %{rpmgroup}.
269        * rtemsdoc/templ.add.in: Add %{rpmgroup}.
270
2712004-02-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
272
273        * rtems/rtems-source.add: Require automake-1.8.2, autoconf-2.59.
274
2752004-02-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
276
277        * rtems/rtems-source.add: New.
278        * Makefile.am: Add rtems/rtems-source.spec handling.
279        * configure.ac: AC_SUBST(RTEMS_VERSION,[_RTEMS_VERSION]).
280        * common/common.add.in: Use www.rtems.com as Vendor.
281
2822004-02-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
283
284        * configure.ac: Use RTEMS_ENABLE_RPMPREFIX.
285
2862004-01-28      Joel Sherrill <joel@oarcorp.com>
287
288        * buildall.in, buildalltar.in, binutils/Makefile.am,
289        cpukit/Makefile.am, gcc3newlib/Makefile.am, gccnewlib/Makefile.am,
290        gdb/Makefile.am: Attempt to convert all c4x-rtems references to
291        tic4x-rtems. Left the rtems documentation alone.
292
2932004-01-28      Joel Sherrill <joel@oarcorp.com>
294
295        * configure.ac: Enable OS versioning by default for 4.7 branch.
296        * setup.def: Update binutils RPM version and build new gcc 3.2.3 RPMs.
297        * autotools/autoconf-rtems.spec.in, autotools/automake-rtems.spec.in:
298        Update for new tool spin.
299
3002004-01-13      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
301
302        * scripts/automake.spec.in: 1.8.2.
303
3042004-01-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
305
306        * scripts/automake.spec.in: 1.8.1.
307        Add Patch0 automake-1.8.1-rtems-20040112-1.diff.
308        Add defattr, URL:-tag.
309
3102004-01-08      Joel Sherrill <joel@OARcorp.com>
311
312        * setup.def: Update gcc/newlib for 4.7 series to 3.3.2 with 20031216
313        gcc patch (RPM revision 4.7-2).
314
3152004-01-07      Joel Sherrill <joel@OARcorp.com>
316
317        * buildall.in, buildalltar.in, binutils/Makefile.am,
318        cpukit/Makefile.am, gcc3newlib/Makefile.am, gccnewlib/Makefile.am,
319        gdb/Makefile.am, rtems/Makefile.am, rtemsdoc/.cvsignore,
320        rtemsdoc/Makefile.am: mips64orion port removed as mips port more
321        completely covers the MIPS family.
322
3232003-12-16      Joel Sherrill <joel@OARcorp.com>
324
325        * setup.def: Update gcc/newlib for 4.7 series to 3.3.2 with 20031022
326        gcc patch (RPM revision 4.7-1).
327
3282003-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
329
330        * configure.ac: Require automake >= 1.8, autoconf >= 2.59.
331
3322003-12-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
333
334        * Makefile.am: Cosmetics.
335        * autotools/Makefile.am: Cosmetics.
336        * autotools/autoconf-rtems.spec.in: 2.59.
337        * autotools/automake-rtems.spec.in: 1.8, Require autoconf-2.59.
338        * binutils/Makefile.am: Cosmetics.
339        * cpukit/Makefile.am: Cosmetics.
340        * gcc3newlib/Makefile.am: Cosmetics.
341        * gccnewlib/Makefile.am: Cosmetics.
342        * gdb/Makefile.am: Cosmetics.
343        * rtems/Makefile.am: Cosmetics.
344        * rtemsdoc/Makefile.am: Cosmetics.
345
3462003-11-17      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
347
348        * gcc3newlib/gccnewlib.add: Add hacks to make gnatlib
349        buildable.
350        * gcc3newlib/base-gnat.add: Add info files.
351
3522003-10-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
353
354        * gcc3newlib/gccnewlib.add: Make not building gnat and gcj the
355        default for gcc-3.3.
356
3572003-10-23      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
358
359        * binutils/Makefile.am: Add tic4x.
360        * binutils/mkspec.in: Remove duplicate rpmgroup.
361
3622003-10-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
363
364        * gcc3newlib/Makefile.am: Add tic4x.
365        * gcc3newlib/gccnewlib.add: Don't install install-tools for
366        gcc >= 3.3.
367
3682003-10-22      Joel Sherrill <joel@OARcorp.com>
369
370        * configure.ac, setup.def: Update to binutils 2.14 adn gcc/newlib to
371        3.2.3 with 20030826 gcc patch.
372
3732003-10-07      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
374
375        * cpukit/target-cpukit.add: New.
376        * cpukit/Makefile.am: Reflect having added target-cpukit.add.
377        Acknowledge osversion.
378        * cpukit/mkspec.in: Acknowledge osversion and rpmgroup.
379        * cpukit/rtems-cpukit.add: Reflect new RTEMS spec conventions.
380
3812003-10-07      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
382
383        * autotools/automake-rtems.spec.in: Automake-1.7.8.
384
3852003-09-26      Joel Sherrill <joel@OARcorp.com>
386
387        * buildall.in, buildalltar.in, binutils/Makefile.am,
388        cpukit/Makefile.am, gcc3newlib/Makefile.am, gccnewlib/Makefile.am,
389        gdb/Makefile.am, rtems/Makefile.am, rtemsdoc/.cvsignore,
390        rtemsdoc/Makefile.am: Obsoleting HP PA-RISC port.
391
3922003-09-24      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
393
394        * autotools/automake-rtems.spec.in: Automake-1.7.7.
395
3962003-09-18      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
397
398        * gcc3newlib/gccnewlib.add: Fix duplicate removal of c++filt.
399        * gcc3newlib/base-gcj.add: Add fastjar.info, jar.1, grepjar.1.
400        * setup.def: gcc3newlib_rpm_release=4.
401
4022003-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
403
404        * binutils/base-binutils.add: Add osversion support.
405        * binutils/binutils.add: Add osversion support.
406        %setup -n %{name}-%{version}.
407        Don't remove c++filt.
408        * binutils/target-binutils.add: Add osversion support.
409        Pickup c++filt.
410        * gcc3newlib/base-g77.add: Add osversion support.
411        * gcc3newlib/base-gcc.add: Add osversion support.
412        * gcc3newlib/base-gcj.add: Add osversion support.
413        * gcc3newlib/base-gnat.add: Add osversion support.
414        * gcc3newlib/gccnewlib.add: Add osversion support.
415        Remove c++filt,
416        %setup -n -n %{name}-%{version}.
417        * gcc3newlib/target-c++.add: Add osversion support.
418        Don't pickup c++filt.
419        * gcc3newlib/target-g77.add: Add osversion support.
420        * gcc3newlib/target-gcc.add: Add osversion support.
421        * gcc3newlib/target-gcj.add: Add osversion support.
422        * gcc3newlib/target-gnat.add: Add osversion support.
423        * gccnewlib/gccnewlib.add: %setup -n %{name}-%{version}.
424        * gdb/base-gdb.add: Add osversion support, rpmgroup, rpmprefix,
425        gdb_version, gdb_target.
426        * gdb/target-gdb.add: Ditto.
427        * gdb/gdb.add: Ditto.
428        %setup -n -n %{name}-%{version}.
429
4302003-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
431
432        * binutils/Makefile.am: Fix osversion support for sh-rtemself.
433        * gcc3newlib/Makefile.am: Fix osversion support for sh-rtemself.
434
4352003-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
436
437        * configure.ac: Add --enable-osversions (OS-versioned RPMS support).
438        * binutils/Makefile.am: Add osversion support.
439        * binutils/mkspec.in: Add osversion support.
440        * gcc3newlib/Makefile.am: Add osversion support.
441        * gcc3newlib/mkspec.in: Add osversion support.
442        * gdb/Makefile.am: Add osversion support.
443        * gdb/mkspec.in: Add osversion support.
444        Add rpmprefix, rpmgroup.
445
4462003-09-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
447
448        * Makefile.am, configure.ac,
449        autotools/autoconf-rtems.spec.in, autotools/automake-rtems.spec.in,
450        binutils/Makefile.am, binutils/base-binutils.add,
451        binutils/binutils.add, binutils/mkspec.in,
452        binutils/target-binutils.add,
453        common/common.add.in,
454        cpukit/Makefile.am,
455        gcc3newlib/Makefile.am, gcc3newlib/base-g77.add,
456        gcc3newlib/base-gcc.add, gcc3newlib/base-gcj.add,
457        gcc3newlib/base-gnat.add, gcc3newlib/gccnewlib.add,
458        gcc3newlib/mkspec.in, gcc3newlib/target-c++.add,
459        gcc3newlib/target-g77.add, gcc3newlib/target-gcc.add,
460        gcc3newlib/target-gcj.add, gcc3newlib/target-gnat.add,
461        gcc3newlib/target-objc.add,
462        gccnewlib/Makefile.am,
463        gdb/Makefile.am,
464        rtems/Makefile.am,
465        rtemsdoc/Makefile.am:
466        Merger from rtems-4-6-branch.
467        * common/common.am: New.
468
4692003-08-23      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
470
471        * common/common.add.in: s/www.oarcorp.com/www.rtems.com/.
472        Add %define __os_install_post %{nil} to prevent RH-9's rpm-brp-strip
473        from running (Chokes on foreign object formats).
474        * gcc3newlib/base-g77.add:
475        Use %{gcc_version} instead of @gcc_version@.
476        * gcc3newlib/gccnewlib.add:
477        Use %{gcc_version} instead of @gcc_version@.
478        Reflect gcc >= 3.3 shipping monolytic infos.
479        * gcc3newlib/target-c++.add:
480        Use %{gcc_version} instead of @gcc_version@.
481        Don't pickup c++filt.
482        * gcc3newlib/target-g77.add:
483        Use %{gcc_version} instead of @gcc_version@.
484        * gcc3newlib/target-gcc.add:
485        Use %{gcc_version} instead of @gcc_version@.
486        * gcc3newlib/target-gcj.add:
487        Use %{gcc_version} instead of @gcc_version@.
488        * gcc3newlib/target-gnat.add:
489        Use %{gcc_version} instead of @gcc_version@.
490        * gcc3newlib/target-objc.add:
491        Use %{gcc_version} instead of @gcc_version@.
492
4932003-08-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
494
495        * binutils/binutils.add: Preps for 2.14.
496        Use %{binutils_version} instead of @binutils_version@.
497        * binutils/base_binutils.add: Preps for 2.14.
498
4992003-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
500
501        * configure.ac: Use rtems-bugs@rtems.com as bug report email address.
502
5032003-07-13      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
504
505        * autotools/automake-rtems.spec.in: Automake-1.7.6.
506
5072003-06-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
508
509        * autotools/automake-rtems.spec.in: Automake-1.7.5.
510
5112003-06-02      Joel Sherrill <joel@OARcorp.com>
512
513        * setup.def: Updated for RPM revision 3 of gcc3.2.3 and newlib1.11.0.
514
5152003-05-07      Joel Sherrill <joel@OARcorp.com>
516
517        * setup.def: Update to gcc3.2.3newlib1.11.0-1.
518        * gcc3newlib/gccnewlib.add: We used .bz2 files.
519
5202003-04-18      Joel Sherrill <joel@OARcorp.com>
521
522        * setup.def: Update to gcc3.2.2newlib1.11.0-2.
523        * gcc3newlib/gccnewlib.add: We used .bz2 files.
524
5252003-02-26      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
526
527        * gcc3newlib/gccnewlib.add: Add %gcc_version, %newlib_version.
528        Apply %gcc_version, %newlib_version.
529        * gcc3newlib/target-c++.add: Apply %gcc_version, %newlib_version.
530        * gcc3newlib/target-g77.add: Apply %gcc_version, %newlib_version.
531        * gcc3newlib/target-gcc.add: Apply %gcc_version, %newlib_version.
532        * gcc3newlib/target-gcj.add: Apply %gcc_version, %newlib_version.
533        * gcc3newlib/target-gnat.add: Apply %gcc_version, %newlib_version.
534        * gcc3newlib/target-objc.add: Apply %gcc_version, %newlib_version.
535
5362003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
537
538        * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
539
5402003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
541
542        * configure.ac: AC_PREREQ(2.57).
543
5442003-02-10      Joel Sherrill <joel@OARcorp.com>
545
546        * gdb/gdb.add, gdb/mkspec.in, gdb/target-gdb.add: Use RPM logic to
547        determine which targets have simulators, configure with appropriate
548        arguments, and package the correct files.
549
5502003-02-07      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
551
552        * gcc3newlib/target-gcc.add: Remove %{_exeext} from gccbug.
553        * gcc3newlib/gccnewlib.add: Add %gcj to support to disabling building
554        gcj from rpmbuild command line.
555        Copy gsyslimits.h for CDN-X compilation.
556
5572003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
558
559        * README.cdn-X: New.
560        * binutils/binutils.add: Add --build=%_build --host=%_host.
561        * cpukit/.cvsignore: Add *.spec.in.
562        * gcc3newlib/gccnewlib.add: Add --build=%_build --host=%_host.
563        * gdb/gdb.add: Add --build=%_build --host=%_host.
564        * rtemsdoc/.cvsignore: Add *.spec.in.
565
5662003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
567
568        * gcc3newlib/gccnewlib.add: Remove Buildroot.
569        * common/.cvsignore: New.
570
5712003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
572
573        * common/common.add.in: Add Vendor, Distribution, BuildRoot.
574        * binutils/Makefile.am: Fix path to clean.add.
575        * binutils/binutils.add: Remove BuildRoot.
576        * cpukit/Makefile.am:  Use $(top_builddir)/common/common.add,
577        $(top_builddir)/common/clean.add, header.add.
578        Generate rtems-cpukit.spec.in.
579        * cpukit/header.add: New.
580        * cpukit/rtems-cpukit.spec.in: Remove.
581        * cpukit/rtems-cpukit.add: New.
582        * gccnewlib/gccnewlib.add: Remove Buildroot.
583        * gdb/gdb.add: Remove Buildroot.
584        * rtemsdoc/rtemsdoc.add: Remove BuildRoot.
585
5862003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
587
588        * rtemsdoc/Makefile.am: Use $(top_builddir)/common/common.add,
589        $(top_builddir)/common/clean.add, header.add.
590        Generate rtemsdoc.spec.in.
591        * rtemsdoc/mkspec.in: Remove exe_ext.
592        * rtemsdoc/rtemsdoc.spec.in: Remove.
593        * gccnewlib/Makefile.am:  Use $(top_builddir)/common/common.add,
594        $(top_builddir)/common/clean.add, header.add.
595        * gccnewlib/base-gcc.m4: Replace @exe_ext@ with %{_exeext}.
596        * gccnewlib/base-gcj.add: Replace @exe_ext@ with %{_exeext}.
597        * gccnewlib/gccnewlib.add: Replace @exe_ext@ with %{_exeext}.
598        Remove header, broken cdn-X configuration, %clean.
599        * gccnewlib/target-g77.add: Replace @exe_ext@ with %{_exeext}.
600        * gccnewlib/target-gcc.add: Replace @exe_ext@ with %{_exeext}.
601        * gccnewlib/target-gcj.add: Replace @exe_ext@ with %{_exeext}.
602        * gccnewlib/target-objc.add: Replace @exe_ext@ with %{_exeext}.
603
6042003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
605
606        * gdb/gdb.add: Remove header, broken cdn-X configuration,
607        %clean, Replace @exe_ext@ with %{_exeext}.
608        * gdb/mkspec.in: Remove exe_ext.
609        * gdb/target-gdb.add: Replace @exe_ext@ with %{_exeext}.
610        * gdb/Makefile.am: Use $(top_builddir)/common/common.add,
611        $(top_builddir)/common/clean.add, header.add.
612        * gcc3newlib/base-gcj.add: Replace @exe_ext@ with %{_exeext}.
613        * cpukit/mkspec.in: Remove exe_ext.
614        * binutils/Makefile.am: Use $(top_builddir)/common/common.add,
615        $(top_builddir)/common/clean.add, header.add.
616
6172003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
618
619        * gcc3newlib/gccnewlib.add: Remove header, broken cdn-X configuration,
620        %clean, Replace @exe_ext@ with %{_exeext}.
621        * gcc3newlib/mkspec.in: Remove exe_ext.
622        * gcc3newlib/target-c++.add: Replace @exe_ext@ with %{_exeext}.
623        * gcc3newlib/target-g77.add: Replace @exe_ext@ with %{_exeext}.
624        * gcc3newlib/target-gcc.add: Replace @exe_ext@ with %{_exeext}.
625        * gcc3newlib/target-gcj.add: Replace @exe_ext@ with %{_exeext}.
626        * gcc3newlib/target-gnat.add: Replace @exe_ext@ with %{_exeext}.
627        * gcc3newlib/target-objc.add: Replace @exe_ext@ with %{_exeext}.
628        * gcc3newlib/Makefile.am: Use $(top_builddir)/common/common.add,
629        $(top_builddir)/common/clean.add, header.add.
630
6312003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
632
633        * Makefile.am: Remove reference to mkbinutilsspec.
634        * configure.ac: Remove EXEEXT check.
635        Add common/clean.add, common/common.add.
636
6372003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
638
639        * binutils/binutils.add: Remove header, broken cdn-X configuration,
640        %clean.
641        * binutils/mkspec.in: Remove exe_ext, build_alias, host_alias.
642        * binutils/target-binutils.add: Replace @exe_ext@ with %{_exeext}.
643
6442003-01-31      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
645
646        * gcc3newlib/header.add: New.
647        * gccnewlib/header.add: New.
648        * binutils/header.add: New.
649        * gdb/header.add: New.
650        * rtemsdoc/header.add: New.
651        * rtemsdoc/rtemsdoc.add: New.
652        * common/clean.add.in: New.
653        * common/common.add.in: New.
654
6552003-01-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
656
657        * binutils/mkspec.in: New.
658        * binutils/.cvsignore: Add mkspec.
659        * mkbinutilspec.in: Remove.
660        * gdb/Makefile.am: Depend on mkspec.
661        * binutils/binutils.add: Add @exe_ext@ to c++filt.
662        Add %_defaultbuildroot.
663        * configure.ac: Reflect changes above.
664        * binutils/Makefile.am: Reflect changes above.
665        * Makefile.am: Remove mkbinutilspec.
666
6672003-01-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
668
669        * gdb/.cvsignore: Add mkspec.
670
6712003-01-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
672
673        * ChangeLog: Fix yesterday's entry.
674        * gdb/target-gdb.add: %defattr(-,root,root).
675        Use %{_prefix} instead of /opt/rtems.
676        Misc. minor changes.
677        * gdb/gdb.add: Use %{_prefix} instead of /opt/rtems.
678        Remove stray unpackaged files.
679        Use %{_defaultbuildroot} instead of hard-coded values.
680        configure --disable-nls.
681        Misc. minor changes.
682        Add BuildPreReq: ncurses-devel.
683        * gdb/base-gdb.add: %defattr(-,root,root).
684        Use %{_prefix} instead of /opt/rtems.
685        Misc. minor changes.
686        * gdb/mkspec.in: New.
687        * gdb/Makefile.am: Reflect addition of gdb/mkspec.in.
688        * gcc3newlib/mkspec.in: Fix usage.
689        * gcc3newlib/gccnewlib.add: Use %{_defaultbuildroot} instead of
690        hard-coded values. Update copyright notice.
691        * mkgdbspec.in: Removed.
692        * Makefile.am: Remove mkgdbspec.
693        * configure.ac: Remove mkgdbspec.
694        Add gdb/mkspec.
695
6962003-01-28      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
697
698        * gcc3newlib/gccnewlib.add: Add various BuildPreReq.
699        Add %defattr(-,root,root) to "dir".
700        * gcc3newlib/base-g77.add: %defattr(-,root,root).
701        * gcc3newlib/base-gcc.add %defattr(-,root,root).
702        * gcc3newlib/base-gcj.add %defattr(-,root,root).
703        * gcc3newlib/base-gnat.add %defattr(-,root,root).
704        * gcc3newlib/target-c++.add %defattr(-,root,root).
705        * gcc3newlib/target-g77.add %defattr(-,root,root).
706        * gcc3newlib/target-gcc.add %defattr(-,root,root).
707        * gcc3newlib/target-gcj.add %defattr(-,root,root).
708        * gcc3newlib/target-gnat.add %defattr(-,root,root).
709        * gcc3newlib/target-objc.add %defattr(-,root,root).
710
7112003-01-28      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
712
713        * setup.def: binutils_rpm_release=2.
714        * binutils/base-binutils.add: %defattr(-,root,root).
715        * binutils/target-binutils.add: Ditto.
716        * binutils/binutils.add: BuildPreReq: texinfo >= 4.2.
717
7182003-01-27      Joel Sherrill <joel@OARcorp.com>
719
720        * buildalltar.in, setup.def: Tool update including binaries for Cygwin
721        with a special RTEMS user account.
722
7232003-01-26      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
724
725        * configure.ac: Add rtemsdoc.
726        * Makefile.ac: Add rtemsdoc.
727        * rtemsdoc/README: New.
728        * rtemsdoc/.cvsignore: New.
729
7302003-01-26      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
731
732        * rtemsdoc/Makefile.am: New.
733        * rtemsdoc/mkspec.in: New.
734        * rtemsdoc/rtemsdoc.spec.in: New.
735        * rtemsdoc/supplement.add.in: New.
736        * rtemsdoc/templ.add.in: New.
737
7382002-12-16      Joel Sherrill <joel@OARcorp.com>
739
740        * setup.def: Updated gcc 3.2.1newlib1.10.0 RPM to revision 4
741        to include m68k crti.o/crtn.o multilib patch.
742
7432002-12-07      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
744
745        * autotools/automake-rtems.spec.in: Update to automake-1.7.2.
746        * autotools/autoconf-rtems.spec.in: Update to autoconf-2.57.
747
7482002-12-06      Joel Sherrill <joel@OARcorp.com>
749
750        * ChangeLog: Removed duplicate entry.
751
7522002-12-06      Joel Sherrill <joel@OARcorp.com>
753
754        * setup.def: Updated patch to fix m68k cut and paste bug which turned
755        a tab into spaces in a Makefile fragment.
756        * gcc3newlib/gccnewlib.add: If building gnat for the mips, the library
757        must be built with a -G0 option.
758
7592002-12-02      Joel Sherrill <joel@OARcorp.com>
760
761        * setup.def, gcc3newlib/gccnewlib.add: Updated to gcc 3.2.1 RPM revision
762        2 which enabled the mips-rtems gnat using gcc 3.2.1 patch 20021129.
763
7642002-11-29      Joel Sherrill <joel@OARcorp.com>
765
766        * setup.def: Updated to gcc-3.2.1.
767
7682002-11-28      Joel Sherrill <joel@OARcorp.com>
769
770        * setup.def: Updated to gcc-3.2 and newlib1.1.0 RPM version 6.
771        * gcc3newlib/gccnewlib.add: Reenabled i386-rtems gnat.
772
7732002-11-25      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
774
775        * gcc3newlib/gccnewlib.add:
776        Remove *.la's to make rpm-4.1/RH-8.0 happy.
777        Remove libiberty.a to make rpm-4.1/RH-8.0 happy.
778        Change gcc/version.c to reflect us having patched gcc.
779
7802002-11-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
781
782        * binutils/binutils.add: Add BuildPreReq: /sbin/install-info.
783        Disable nls.
784        Apply gzip -9qf to compress *infos and *mans.
785        Apply /sbin/install-info.
786        Remove  *c++-filt.
787        * binutils/base-binutils.add: Add PreReq: /sbin/install-info.
788        Apply /sbin/install-info.
789        Package as.info-*.gz.
790        * binutils/target-binutils.add:
791        Package man1/*.1*.
792
7932002-11-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
794
795        * autotool/autoconf-rtems.spec.in: Fix @prefix@.
796
7972002-11-13      Joel Sherrill <joel@OARcorp.com>
798
799        * setup.def: Switched to binutils 2.13.1
800        * binutils/Makefile.am: Remove a29k-rtems.
801
8022002-11-11      Joel Sherrill <joel@OARcorp.com>
803
804        * setup.def, gcc3newlib/gccnewlib.add: Patch includes updates
805        which were patch changes for -3 and -4 RPM revisions.   Disabled
806        build of gnat for i386-rtems as it failed to build.
807
8082002-10-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
809
810        * gcc3newlib/gccnewlib.add: Remove %{target} != %{build} comment
811        (RH-8.0/rpm-4.1 bogusly expands the macros and chokes.)
812        * binutils/binutils.add: Remove %{target} != %{build} comment
813        (RH-8.0/rpm-4.1 bogusly expands the macros and chokes.).
814        Comment out CONFIGURE_ARGS (RH-8.0/rpm-4.1 is broken wrt. _build_os
815        and _target_os)
816        * gcc3newlib/base-gcc.add: Add gccint*infos.
817        * gcc3newlib/base-gcj.add: Add gcj*infos.
818        Mark manpages as %doc and pickup the gzipped versions.
819
8202002-10-25      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
821
822        * autotools/automake-rtems.spec.in: Fix my address. Set up PATH
823        before running configure (Prep. for automake >= 1.7).
824
8252002-10-25      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
826
827        * autotools/autoconf-rtems.spec.in: New.
828        Remove Provides: autoconf (Conflicts with RH-8.0).
829        * autotools/autoconf-rtems.spec: Remove.
830        * autotools/automake-rtems.spec.in:
831        Remove Provides: automake (Conflicts with RH-8.0).
832        * gcc3newlib/Makefile.am: Remove references to mkgcc3newlibspec.
833        * Makefile.am: Ditto.
834        * configure.ac: Add autotools/autoconf-rtems.spec.in.
835
8362002-10-24      Joel Sherrill <joel@OARcorp.com>
837
838        * setup.def: Update gcc 3.2 pathc to includ epatch for gcc PR8314.
839        * gcc3newlib/gccnewlib.add: Don't build mips/gnat as we do not
840        currently include the patch referenced in PR8344.
841
8422002-10-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
843
844        * .cvsignore: Reformat.
845        Add autom4te*cache.
846        Remove autom4te.cache.
847
8482002-09-14      Joel Sherrill <joel@OARcorp.com>
849
850        * gcc3newlib/base-gcj.add, gcc3newlib/gccnewlib.add,
851        gcc3newlib/target-gcj.add: First attempt at enabling Java support.
852
8532002-08-21      Joel Sherrill <joel@OARcorp.com>
854
855        * setup.def, gcc3newlib/gccnewlib.add: Updated the tools for
856        gcc 3.2 and Ada.
857
8582002-08-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
859
860        * gcc3newlib/gccnewlib.add: Re-add i386-rtems Ada.
861        Add %_gnat and --define 'gnat [0|1]' support.
862        Enable gnat for gcc-3.2/Disable for gcc-3.1.
863        Add hacks to build gnatlib.
864        Re-activate commented out fragments for old gcc versions.
865        Add @target_alias@-gnatgcc.
866
8672002-08-15      Joel Sherrill <joel@OARcorp.com>
868
869        * setup.def: New gcc 3.1 RPMs (-7).
870        * gcc3newlib/gccnewlib.add:  i386-rtems doesn't build Ada.
871
8722002-08-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
873
874        * gcc3newlib/Makefile.am: Remove c_only remnants.
875        * gcc3newlib/gccnewlib.add: Reflect gcc-3.2 putting c++
876        headers into c++ instead of g++.
877        * gcc3newlib/target-c++.add: Ditto.
878
8792002-08-13      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
880
881        * gcc3newlib/base-gnat.add: Don't use %{%prefix}/bin/gnat*.
882        * gcc3newlib/Makefile.am: Use mkspec for c4x.
883        * gcc3newlib/gccnewlib.add: Rework processing of %if %build_XXX.
884        Rework handing Ada.
885        Don't put adalib and adainclude into files.gcc.
886        * gcc3newlib/target-gnat.add: Add adalib.
887        Add adainclude.
888
8892002-08-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
890
891        * gcc3newlib/base-gnat.add: Use -n rtems-base-gnat.
892
8932002-08-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
894
895        * gcc3newlib/.cvsignore: Add mkspec.
896
8972002-08-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
898
899        * mkgcc3newlibspec.in: Remove
900        * gcc3newlib/mkspec.in: New.
901        * configure.ac: Reflect changes above.
902        * gcc3newlib/gccnewlib.add: Add build_XXX defines.
903        Add preliminary gnat support.
904        * gcc3newlib/base-g77.add: Add build_g77.
905        * gcc3newlib/base-gcj.add: Add build_gcj.
906        * gcc3newlib/base-gnat.add: New.
907        * gcc3newlib/target-c++.add: Add build_cxx.
908        * gcc3newlib/target-g77.add: Add build_g77.
909        * gcc3newlib/target-gcj.add: Add build_gcj.
910        * gcc3newlib/target-objc.add: Add build_objc.
911        * gcc3newlib/target-gnat.add: New.
912        * gcc3newlib/Makefile.am: Use ./mkspec. Use unified spec.
913
9142002-08-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
915
916        * setup.def: Increment release for gcc3newlib.
917        * gcc3newlib/gccnewlib.add: Do not put cc1plus into gcc-rpm.
918
9192002-08-08      Joel Sherrill <joel@OARcorp.com>
920
921        * setup.def, binutils/base-binutils.add, binutils/target-binutils.add:
922        Updated to binutils 2.13 which has no known issues.
923
9242002-08-06      Joel Sherrill <joel@OARcorp.com>
925
926        * setup.def: Updating gcc3/newlib patches and tool versions.  The
927        focus of this round of patches was ot eliminate header file name
928        conflicts between RTEMS and newlib.
929
9302002-07-30      Joel Sherrill <joel@OARcorp.com>
931
932        * setup.def: Updated to gcc3.1/newlib 1.10.0 RPM revision 5 with
933        the gcc3 patch 20020730a and newlib 1.10.0 patch 20020726.
934
9352002-07-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
936
937        * autotools/automake-rtems.spec.in: Automake-1.6.3.
938        * cpukit/.cvsignore: Add mkspec. Remove rtems.spec.
939
9402002-07-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
941
942        * configure.ac: Use AC_CONFIG_FILES(script, chmod +x script)
943        to generate mk*spec scripts.
944        * mkbspspec.in: Use ',' as pattern delimiter in sed expression
945        for $rpm_build_root.
946        * mkbinutilsspec.in:  Use ',' as pattern delimiter in sed
947        expression for $rpm_build_root.
948        * cpukit/mkspec.in: Cosmetical changes.
949
9502002-07-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
951
952        * ChangeLog: Fix 2002-07-22 ChangeLog entry bogusly referring to
953        Joel.
954        * cpukit/Makefile.am: New.
955        * cpukit/mkspec.in: New.
956        * cpukit/rtems-cpukit.spec.in: New.
957        * cpukit/.cvsignore: New.
958        * configure.ac: Add cpukit.
959        Add RTEMS_TOP to pickup _RTEMS_VERSION (required by cpukit).
960        * Makefile.am: Add cpukit. Add ACLOCAL_AMFLAGS (required to pickup
961        RTEMS_VERSION).
962        * setup.def: Use %{_tmppath} as default for $rpm_build_root.
963        * mkbinutilsspec.in: Use ',' as pattern delimiter in sed expression
964        for $rpm_build_root.
965        * mkgccnewlibspec.in:  Use ',' as pattern delimiter in sed
966        expression for $rpm_build_root.
967        * mkgcc3newlibspec.in:  Use ',' as pattern delimiter in sed
968        expression for $rpm_build_root.
969        * mkgdbspec.in:  Use ',' as pattern delimiter in sed expression for
970        $rpm_build_root.
971
9722002-07-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
973
974        * binutils/Makefile.am: Add or32-rtems-binutils.
975
9762002-07-19      Joel Sherrill <joel@OARcorp.com>
977
978        * setup.def: Updated newlib patch to get sh and hppa crt0 mods.
979
9802002-07-01      Joel Sherrill <joel@OARcorp.com>
981
982        * setup.def: Update gcc3 RPMs for new patches.
983
9842002-06-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
985
986        * autotools/automake-rtems.spec.in: Update to automake-1.6.2.
987
9882002-06-14      Joel Sherrill <joel@OARcorp.com>
989
990        * mkgdbspec.in, setup.def, gcc3newlib/gccnewlib.add, gdb/gdb.add:
991        Updated to gcc 3.1 and gdb 5.2.
992
9932001-05-29      Joel Sherrill <joel@OARcorp.com>
994
995        * setup.def: Updated to binutils 2.12.1.
996        * rtems/Makefile.am: Remove m68k-rtemself references.
997
9982002-06-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
999
1000        * mkgcc3newlibspec.in: Remove SETUP (bogus).
1001        * gcc3newlib/target-c++.add: New.
1002        * gcc3newlib/Makefile.am: Add target-c++.add.
1003        * gcc3newlib/base-g77.add: Adapt to gcc-3.1.
1004        Reflect having split out c++. Various minor fixes.
1005        * gcc3newlib/base-gcc.add: Ditto.
1006        * gcc3newlib/gccnewlib.add: Ditto.
1007        * gcc3newlib/target-gcc.add: Ditto.
1008
10092002-04-20      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1010
1011        * gcc3newlib/gccnewlib.add: Add gcc_update --touch to fix
1012        timestamps.
1013
10142001-04-16      Joel Sherrill <joel@OARcorp.com>
1015
1016        * .cvsignore: Added files added by automake 1.6.1.
1017        * setup.def: New shot at gcc 3.0.4 RPMs.
1018        * binutils/Makefile.am, gdb/Makefile.am, rtems/Makefile.am:
1019        Deleted m68k-rtemself.
1020        * gcc3newlib/gccnewlib.add: Commented out host/target OS check.
1021 
10222002-04-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1023
1024        * autotools/automake-rtems.spec.in: Update to automake-1.6.1.
1025        Use *.tar.bz2.
1026
10272002-04-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1028
1029        * mkbinutilspec.in: Fix PATCH2.
1030
10312002-04-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1032
1033        * gcc3newlib/gccnewlib.add: Add -Bgcc/ when collecting multilibs.
1034
10352002-04-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1036
1037        * gcc3newlib/gccnewlib.spec.in: Removed from CVS.
1038
1039
10402002-04-03      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1041
1042        * mkbinutilspec.in: Add support for empty patch-version (no patch).
1043        * mkgcc3newlibspec.in: Ditto.
1044        * setup: Fix gcc3*_versions handling.
1045        * setup.def: binutils_patch_version=.
1046        * binutils/binutils.add: Reflect changes to mkbinutilspec.in,
1047        Use "%{_target_os}" != "%{_build_os}" to detect cross-building.
1048        * binutils/target-binutils.add: Comment out c++filt.
1049        * gcc3newlib/base-gcc.add: Remove duplicate libm.info.
1050        * gcc3newlib/gccnewlib.add: Reflect changes to mkgcc3newlibspec.in.
1051        Use "%{_target_os}" != "%{_build_os}" to detect cross-building.
1052        Comment out gcc-2.95.x hacks.
1053        Remove *.la from installed files.
1054        * gcc3newlib/gccnewlib_c_only.spec.in: Remove.
1055
10562001-04-02      Joel Sherrill <joel@OARcorp.com>
1057
1058        * buildall.in: Correct logic for detecting 0 RTEMS RPMS installed.
1059
10602001-03-29      Joel Sherrill <joel@OARcorp.com>
1061
1062        * .cvsignore: Added mkgcc3newlib.
1063
10642001-03-29      Joel Sherrill <joel@OARcorp.com>
1065
1066        * gcc3newlib/.cvsignore: New file.
1067
10682001-03-28      Joel Sherrill <joel@OARcorp.com>
1069
1070        * Per PR64 added support for gcc 3.x RPMs
1071        * Makefile.am, configure.ac, mkspec, setup, setup.def: Modified.
1072        * mkgcc3newlibspec.in: New file.
1073        * gcc3newlib: New subdirectory.
1074        * base-g77.add, base-gcc.add, base-gcj.add, gccnewlib.add,
1075        gccnewlib_c_only.spec.in, gccnewlib.spec.in, HISTORY, Makefile.am,
1076        README, target-g77.add, target-gcc.add, target-gcj.add,
1077        target-objc.add: New files.
1078
10792001-03-28      Joel Sherrill <joel@OARcorp.com>
1080
1081        * binutils/binutils.add: Commented out patch since binutils 2.12
1082        does not require one.
1083
10842002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1085
1086        * configure.ac:
1087        AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
1088        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
1089        * autotools/Makefile.am: Remove AUTOMAKE_OPTIONS.
1090        * Makefile.am: Remove AUTOMAKE_OPTIONS.
1091        * binutils/Makefile.am: Remove AUTOMAKE_OPTIONS.
1092        * gccnewlib/Makefile.am: Remove AUTOMAKE_OPTIONS.
1093        * gdb/Makefile.am: Remove AUTOMAKE_OPTIONS.
1094        * rtems/Makefile.am: Remove AUTOMAKE_OPTIONS.
1095
10962002-03-06      Ralf Corsepius <corsepiu@faw-uni-ulm.de>
1097
1098        * PR151
1099        * autotools/automake-rtems.spec.in: New.
1100        * autotools/automake-rtems.spec: Removed.
1101        * configure.ac: Reflect changes above.
1102
11032001-02-27      Joel Sherrill <joel@OARcorp.com>
1104
1105        * configure.ac: Be a little more lenient in matching sparc-solaris.
1106
11072002-01-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1108
1109        * mkbinutilspec.in, mkgccnewlibspec.in, gccnewlib/base-chill.add,
1110        gccnewlib/base-g77.add, gccnewlib/base-gcc.add,
1111        gccnewlib/base-gcj.add, gccnewlib/gccnewlib.add,
1112        gccnewlib/target-chill.add, gccnewlib/target-g77.add,
1113        gccnewlib/target-gcc.add, gccnewlib/target-gcj.add,
1114        gccnewlib/target-objc.add: Added more support for Canadian Cross
1115        building.
1116
11172001-01-30      Joel Sherrill <joel@OARcorp.com>
1118
1119        * buildall.in: Corrected logic for detecting when no RPMs are installed.
1120
11212001-01-24      Joel Sherrill <joel@OARcorp.com>
1122
1123        * README: Added Canadian Cross instructions.
1124
11252002-01-23      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1126
1127        * configure.ac: Add AC_PREFIX_DEFAULT([/opt/rtems]).
1128        * mkbinutilsspec.in: Add propagation of @prefix@.
1129        * binutils/base-binutils.add:
1130        Let %post and %unpost apply %{_prefix}.
1131        Apply %{_prefix} instead of /opt/rtems.
1132        * binutils/binutils.add: Update copyright notice.
1133        Add _prefix.
1134        Apply %{_prefix} instead of /opt/rtems.
1135        Remove -a 0 in %setup.
1136        Rework hack to SuSE's rpm screwing up %{_target}.
1137        Replace ARGS with CONFIGURE_ARGS.
1138        * binutils/target-binutils.add:
1139        Apply %{_prefix} instead of /opt/rtems.
1140
11412002-01-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1142
1143        * binutils/binutils.add: Add initial support for building
1144        Canadian cross RPMs.  It should work like this:
1145            cd rtems/scripts
1146            ./configure --build=`../config.guess` --host=i386-cygwin
1147            make install
1148            rpm --target=i386-cygwin \
1149                /usr/src/redhat/SPECS/<target>-binutils-..spec.
1150
1151            alien -t /usr/src/redhat/RPMS/....i386.rpm
1152        .. and voila ... your tarball, with rpm-consistency checks etc. applied.
1153
11542001-01-22      Joel Sherrill <joel@OARcorp.com>
1155
1156        * buildalltar.in: Modified to support Canadian cross builds.
1157        It was testing using a RedHat 7.2 host to build *-rtems tools
1158        that run on an i386-cygwin host.
1159
11602001-11-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1161
1162        * configure.ac: Fix typo to allow custom RPM_SPECSdirs.
1163
11642001-10-16      Joel Sherrill <joel@OARcorp.com>
1165
1166        * setup.def: Bumped the gdb_patch_version to account for a configuration
1167        problem on psim where it could not be enabled for powerpc-RTEMS.
1168        * gdb/Makefile.am: Add i386-RTEMS and powerpc-RTEMS targets.
1169
11702001-10-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1171
1172        * mkbinutilsspec.in: Guard sed-pattern against autoconf.
1173        * mkgccnewlibspec.in: Guard sed-pattern against autoconf, remove
1174        Target_alias.
1175        * mkgdbspec.in: Guard sed-pattern against autoconf.
1176        * mkbspspec.in: Guard sed-pattern against autoconf.
1177        * configure.ac: Rework check for RPM_SPECSdir.
1178        * autotools/automake-rtems.spec: Update to automake-1.5.
1179
11802001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1181
1182        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
1183        * configure.in: Remove.
1184        * configure.ac: New file, generated from configure.in by autoupdate.
1185
11862001-09-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1187
1188        * gdb/Makefile.am, gccnewlib/Makefile.am, binutils/Makefile.am:
1189        Initially setup CLEANFILES using = instead of += to make
1190        automake-1.5 happy.
1191
11922001-09-13      Joel Sherrill <joel@OARcorp.com>
1193
1194        * setup.def, gccnewlib/gccnewlib.add, gccnewlib/target-gcc.add:
1195        Revert changes because of gcc 2.5.x/3.0 transition and continue
1196        to support gcc 2.95.x as primary version.
1197
11982001-09-13      Joel Sherrill <joel@OARcorp.com>
1199
1200        * mkgccnewlibspec.in,
1201        Use Target_alias not target_alias to avoid conflicts with new autoconf.
1202        * setup.def: Changed version numbers in attempt at building gcc 3.0.1.
1203        Only sparc and arm built for C/C++ OK. :(
1204        * gccnewlib/base-gcc.add: Modifications to reflect files not in gcc 3.x.
1205        * gccnewlib/gccnewlib.add: gcc 3.x does not have "everything in the name"
1206        * target-gcc.add: Modifications to reflect files not in gcc 3.1
1207
12082001-09-13      Joel Sherrill <joel@OARcorp.com>
1209
1210        * autotools/.cvsignore: New file.
1211
12122001-07-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1213
1214        * autotools/Makefile.am, autotools/autoconf-rtems.spec,
1215        autotools/automake-rtems.spec: New.
1216        * configure.in, Makefile.am: Add autotools/.
1217
12182001-08-30      Joel Sherrill <joel@OARcorp.com>
1219
1220        * .cvsignore: Add buildalltar.
1221
12222001-08-30      Joel Sherrill <joel@OARcorp.com>
1223
1224        * buildalltar.in: New file.
1225        * configure.in, Makefile.am: Modified to reflect addition of file.
1226
12272001-08-10      Joel Sherrill <joel@OARcorp.com>
1228
1229        * mkgdbspec.in: Make list of simulators very complete.
1230        * setup.def: Update versions.
1231
12322001-07-03      Joel Sherrill <joel@OARcorp.com>
1233
1234        * setup.def, binutils.add, gccnewlib.add: Updated to build
1235        binutils 2.11.2 (rtems patch 20010622), gcc 2.95.3 (rtems
1236        patch a20010622), and newlib 1.9.0 (rtems patch 10020622).
1237
12382001-05-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1239
1240        * configure.in: Remove AC_EXEEXT, treat .exe manually.
1241        * gccnewlib/base-gcc.add: Remove cpp.
1242        * gccnewlib/gccnewlib.add: mv cpp $target_alias-cpp, update
1243        copyright.
1244
12452001-04-16      Joel Sherrill <joel@OARcorp.com>
1246
1247        * setup.def: Modified the binutils version to 2.11 and
1248        RPM revision 3 to reflect experimentation with new binutils release.
1249
12502001-04-11      Joel Sherrill <joel@OARcorp.com>
1251
1252        * binutils/Makefile.am: Added a29k-rtems.
1253        * binutils/binutils.add: Switch to .bz2 extension to reflect
1254        real way code is compressed on distribution sites now.
1255
12562001-03-19      Joel Sherrill <joel@OARcorp.com>
1257
1258        * setup.def: Updated version numbers and patches for binutils
1259        and gdb.  binutils was to get correct patch in field.  gdb
1260        was to add mipstx39-rtems configurery support.
1261
12622001-03-14      Joel Sherrill <joel@OARcorp.com>
1263
1264        * gdb/Makefile.am, mkgdbspec.in: Added mipstx39-rtems
1265        configuration to gdb since this includes the JMR3904 simulator.
1266
12672001-01-03      Joel Sherrill <joel@OARcorp.com>
1268
1269        * setup.def, binutils/HISTORY, gccnewlib/HISTORY: Updated
1270        binutils HISTORY to reflect new revision.  Updated gcc to fix
1271        i960 C++ problem.  Updated newlib to move to newlib 1.9.0.
1272
12732000-11-13      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1274
1275        * gccnewlib/gccnewlib.add: Fix typo in URL.
1276
12772000-11-05      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1278
1279        * configure.in: Adapt m4-quoting to autoconf-2.49b, use $host
1280        instead of $target to setup RPM_CPU, move chmod 755 buildall to
1281        AC_OUTPUT's extra-cmds.
1282       
12832000-10-30      Joel Sherrill <joel@OARcorp.com>
1284
1285        * buildall.in, mkgdbspec.in, setup.def, binutils/Makefile.am,
1286        gccnewlib/HISTORY, gccnewlib/Makefile.am, gdb/Makefile.am:
1287        Added mips-rtems, updated to include new patches and
1288        gcc 2.95.2/newlib 1.8.2 revision 11 RPM.
1289
12902000-10-26      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1291
1292        * configure.in: Remove trailing '/'s from setting up RPM_SPECdir.
1293
12942000-10-18      Joel Sherrill <joel@OARcorp.com>
1295
1296        * setup.def: Updating version numbers for gcc/newlib RPM release 10.
1297
12982000-08-30      Joel Sherrill <joel@OARcorp.com>
1299
1300        * setup.def: Updated gcc and newlib patches and bumped RPM revision.
1301        Patches primarily add or16/or32 basic support to newlib and
1302        i386 multilib improvements to gcc from Ralf Corsepius.
1303
13042000-08-10      Joel Sherrill <joel@OARcorp.com>
1305
1306        * ChangeLog: New file.
Note: See TracBrowser for help on using the repository browser.