source: rtems/scripts-ada/gnatnewlib/gnatnewlib.spec.in @ df49c60

4.104.114.84.95
Last change on this file since df49c60 was df49c60, checked in by Joel Sherrill <joel.sherrill@…>, on 06/12/00 at 15:00:15

Merged from 4.5.0-beta3a
  • Property mode set to 100644
File size: 12.7 KB
Line 
1#
2# spec file for building gcc for rtems
3#
4# Copyright  (c)  1999  OARCorp, Huntsville, AL
5#
6# please send bugfixes or comments to joel@OARcorp.com
7#
8
9Vendor:       OAR Corporation
10Distribution: Linux
11Name:         @target_alias@-gnat-newlib
12Summary:      gnat, gcc, and newlib C Library for @target_alias@.
13Group:        gnatrtems
14Release:      @Release@
15License:      gcc is GPL/LGPL ; newlib no has restrictions on run-time usage
16
17Provides:       rtems-base-gnat @target_alias@-gnat
18Provides:       rtems-base-gnat-binutils @target_alias@-gnat-binutils
19# Requires:             @target_alias@-binutils
20
21Autoreqprov:    on
22Packager:       corsepiu@faw.uni-ulm.de and joel@OARcorp.com
23
24Version:        gnat@gnat_version@
25Source0:        ftp://ftp.gnu.org/pub/gnu/gcc/gcc-@gcc_version@.tar.gz
26Source1:        ftp://sourceware.cygnus/com/pub/newlib/newlib-@newlib_version@.tar.gz
27Source2:        ftp://cs.nyu.edu/pub/gnat/gnat-@gnat_version@-src.tar.gz
28Source3:        ftp://ftp.gnu.org/pub/gnu/binutils/binutils-@binutils_version@.tar.gz
29Patch0:         gcc-@gcc_version@-rtems-gnat-@gnat_version@-@gcc_patch_version@.diff
30Patch1:         newlib-@newlib_version@-rtems-@newlib_patch_version@.diff
31Patch2:         gnat-@gnat_version@-rtems-@gnat_patch_version@.diff
32Patch3:         binutils-@binutils_version@-rtems-gnat-@gnat_version@-@binutils_patch_version@.diff
33#
34Buildroot:      /tmp
35
36#
37# The original sources are not included in the source RPM.
38# If we included them, then the source RPMs for each target
39# would duplicate MBs of source unnecessarily.  This is
40# a duplication of over 30 MBs of source for each of
41# the more than 10 targets it is possible to build.
42#
43# You can get them yourself from the Internet and copy them to
44# your /usr/src/redhat/SOURCES directory ($RPM_SOURCE_DIR).
45# Or you can try the ftp options of rpm :-)
46#
47NoSource:       0
48NoSource:       1
49NoSource:       2
50NoSource:       3
51
52%description
53RTEMS is an open source operating system for embedded systems.
54
55This is gcc's and newlib C Library's sources with patches for RTEMS.
56
57 The original sources are not included in the source RPM.
58 If we included them, then the source RPMs for each target
59 would duplicate MBs of source unnecessarily.  This is
60 a duplication of over 30 MBs of source for each of
61 the more than 10 targets it is possible to build.
62
63 You can get them yourself from the Internet and copy them to
64 your /usr/src/redhat/SOURCES directory ($RPM_SOURCE_DIR).
65 Or you can try the ftp options of rpm :-)
66
67This version of GNAT/RTEMS RPMs is based on the following:
68
69  + gnat-@gnat_version@-src
70  + gcc-@gcc_version@
71  + newlib-@newlib_version@
72  + binutils-@binutils_version@
73
74with appropriate patches.
75
76%package -n rtems-base-gnat
77Summary:      base package for rtems gnat, gcc, and newlib C Library
78Group: rtems
79
80%description -n rtems-base-gnat
81
82RTEMS is an open source operating system for embedded systems.
83
84This is the files for gnat, gcc, and newlib that are shared by all targets.
85
86%package -n rtems-base-gnat-binutils
87Summary:      base package for rtems binutils
88Group: rtems
89
90%description -n rtems-base-gnat-binutils
91
92RTEMS is an open source operating system for embedded systems.
93
94This is the base for binutils regardless of target CPU.
95
96%package -n @target_alias@-gnat-binutils
97Summary:      rtems binutils for @target_alias@
98Group: rtems
99Requires: rtems-base-gnat-binutils
100
101%description -n @target_alias@-gnat-binutils
102
103RTEMS is an open source operating system for embedded systems.
104
105This is the GNU binutils for RTEMS targetting @target_alias@.
106
107%package -n @target_alias@-gnat
108Summary:      rtems gnat, gcc, and newlib C Library for @target_alias@
109Group: rtems
110Requires: @target_alias@-gnat-binutils rtems-base-gnat
111
112%description -n @target_alias@-gnat
113RTEMS is an open source operating system for embedded systems.
114
115This is gnat, gcc, and newlib C Library for @target_alias@.
116
117%prep
118# untar the sources inside @target_alias@-gnat-newlib
119%setup -c -n @target_alias@-gnat-newlib -a 0 -a 1 -a 2 -a 3
120
121%patch0 -p0
122%patch1 -p0
123%patch2 -p0
124%patch3 -p0
125
126  # this 281 needs to be a variable. :(
127  cd gcc-@gcc_version@
128  patch -p0 <../gnat-@gnat_version@-src/src/gcc-281.dif
129 
130  mv ../gnat-@gnat_version@-src/src/ada .
131
132  cd ada
133  touch treeprs.ads a-[es]info.h nmake.ad[bs]
134  cd ../..    # now back at top
135
136  # Now we should be done patching everything.. build up a source tree
137
138  # this sequence is VERY dependent on the versions involved
139  #  When the gcc gets updated to 2.95.x or newer, this HAS to change.
140
141  mkdir src
142  cd src
143  # configure scripts
144  for f in config config.guess config.sub configure configure.in \
145        config-ml.in include install-sh ltconfig ltmain.sh Makefile.in \
146        move-if-change mkinstalldirs libiberty
147  do
148        # some packages have more configure scripts than others
149        # our list is inclusive
150        test -r ../binutils-@binutils_version@/$f && \
151          mv ../binutils-@binutils_version@/$f .
152  done
153
154  # link in gcc
155  mv ../gcc-@gcc_version@ gcc
156 
157  # link in binutils
158  for f in bfd binutils gas gprof ld opcodes etc
159  do
160    mv ../binutils-@binutils_version@/$f .
161  done
162
163  # link in newlib
164  mv ../newlib-@newlib_version@/newlib .
165  cd ..
166
167  # now we have a linked together source tree
168  test -d build || mkdir build
169
170
171%build
172  cd build
173  # after we switch off gcc 2.8.1, configure using gcc not a src directory
174  # and build binutils separately.
175  ../src/configure --target=@target_alias@ \
176    --with-gnu-as --with-gnu-ld --with-newlib --verbose \
177    --prefix=/opt/gnatrtems
178
179  # for now we are building all the languages
180  #  '--enable-languages=c,c++'
181
182#  #  This is a hack that is only because gnat still uses gcc 2.8.1
183#  test -d ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@ ||
184#    mkdir -p ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@
185#  for dir in ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@/include \
186#             ${RPM_BUILD_ROOT}/opt/gnatrtems/@target_alias@/sys-include
187#  do
188#    test -d ${dir} || mkdir -p ${dir}
189#    cp ../newlib-@newlib_version@/newlib/libc/sys/rtems/include/limits.h ${dir}
190#  done
191
192  make CC=gcc CFLAGS="-O2" LANGUAGES="c" all
193  make CC=gcc CFLAGS="-O2" LANGUAGES="c" info
194  # must be installed to allow gnat to continue to build
195  make CC=gcc CFLAGS="-O2" LANGUAGES="c" install install-info
196  make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \
197    CC=gcc CFLAGS="-O2" LANGUAGES="c" install install-info
198
199#  When GNAT uses a gcc that finds the RTEMS limits.h, this will not
200#  be needed.  This should not be needed if the limits.h trick above works.
201#   cd gcc
202#   rm -f stmp-multilib
203#   find . -name "*.a" -print | xargs -e rm -f
204#
205#   make all
206#   cd ..
207
208####################     Ada from here down      ###################
209
210    # Just so the log shows what directory we are in.
211    pwd
212    cd gcc
213    echo "Starting build of GNAT proper."
214    make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \
215     CC=gcc CFLAGS="-O2" LANGUAGES="c ada"
216
217    echo "Starting build of cross GNAT tools"
218    make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \
219     CC=gcc CFLAGS="-O2 -g" LANGUAGES="c ada" cross-gnattools
220
221    echo "Starting build of ada.all.cross"
222    make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \
223     CC=gcc CFLAGS="-O2" LANGUAGES="c ada" ada.all.cross
224
225    # must have -gnato to pass validation
226    # may want CC=gcc GNATLIBCFLAGS="-O3" GNATLIBFLAGS="-gnatpgn" gnatliy
227    # NOTE:  gnatlib is not multilib'ed -- serious embedded flaw
228    echo "Starting build of gnatlib"
229    make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \
230     CC=gcc GNATLIBCFLAGS="-O2 -g" gnatlib
231
232%install
233  cd build
234  # Bug in gcc-2.95.1: It doesn't build this installation directory
235  # If it doesn't find it, gcc doesn't install @target_alias@/bin/gcc
236  # ../gcc-@gcc_version@/mkinstalldirs \
237  #   $RPM_BUILD_ROOT/opt/gnatrtems/@target_alias@/bin
238
239  cd gcc
240  echo "Starting install of gnat"
241  make prefix=$RPM_BUILD_ROOT/opt/gnatrtems \
242     CC=gcc CFLAGS="-O2 -g -gnata -gnatp" LANGUAGES="c ada" install
243  # GNAT has to be mostly installed to even build itself
244
245  make prefix=$RPM_BUILD_ROOT/opt/gnatrtems install-info
246
247  # cd go back to build/
248  pwd
249  cd ..
250
251  # gzip info files
252  gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info 2>/dev/null
253  gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info-? 2>/dev/null
254  gzip -f $RPM_BUILD_ROOT/opt/gnatrtems/info/*.info-?? 2>/dev/null
255
256  rm -f dirs ;
257  echo "%dir /opt/gnatrtems/lib" >> dirs ;
258  echo "%dir /opt/gnatrtems/lib/gcc-lib" >> dirs ;
259  echo "%dir /opt/gnatrtems/lib/gcc-lib/@target_alias@" >> dirs ;
260
261  touch ../files
262  # if test -f $RPM_BUILD_ROOT/opt/gnatrtems/info/configure.info.gz;
263  # then
264# These common files are only present in binutils >= 2.9.5
265  #   find $RPM_BUILD_ROOT/opt/gnatrtems/info -name 'configure.*' | \
266  #     sed -e "s,^$RPM_BUILD_ROOT,,g" > ../files
267  # else
268  #   touch ../files
269  # fi
270# These target specific files are only present in binutils >= 2.9.5
271  if test -f /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@;
272  then
273    echo /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@ > ../files.target
274  else
275    touch ../files.target
276  fi
277
278  # Collect multilib subdirectories
279  TGTDIR="$RPM_BUILD_ROOT/opt/gnatrtems/lib/gcc-lib/@target_alias@/@gcc_version@"
280  find $TGTDIR \
281    \( -type d -a ! -path "$TGTDIR/include*" \) -print | \
282    sed -e "s,^$RPM_BUILD_ROOT,%dir ,g" >> dirs
283
284  # Collect files to go into different packages
285  # NOTE: This is left in as a place holder to move the 2.95.x code into.
286  cp dirs ../files.gcc
287
288  f=`find $TGTDIR ! -type d -print | sed -e "s,^$RPM_BUILD_ROOT,,g"`;
289  for i in $f; do
290    case $i in
291    *) echo "$i" >> ../files.gcc ;;
292    esac
293  done
294
295%files -n rtems-base-gnat-binutils -f files
296%dir /opt/gnatrtems/info
297# %doc /opt/gnatrtems/info/dir
298# %doc /opt/gnatrtems/info/as.info.gz
299# %doc /opt/gnatrtems/info/as.info-?.gz
300# %doc /opt/gnatrtems/info/bfd.info.gz
301# %doc /opt/gnatrtems/info/bfd.info-?.gz
302# %doc /opt/gnatrtems/info/binutils.info.gz
303# %doc /opt/gnatrtems/info/binutils.info-?.gz
304# %doc /opt/gnatrtems/info/ld.info.gz
305# %doc /opt/gnatrtems/info/ld.info-?.gz
306# %doc /opt/gnatrtems/info/gasp.info.gz
307# %doc /opt/gnatrtems/info/standards.info.gz
308
309%dir /opt/gnatrtems/man
310%dir /opt/gnatrtems/man/man1
311
312%dir /opt/gnatrtems/include
313/opt/gnatrtems/include/bfd.h
314/opt/gnatrtems/include/ansidecl.h
315/opt/gnatrtems/include/bfdlink.h
316
317%dir /opt/gnatrtems/lib
318/opt/gnatrtems/lib/libbfd*
319/opt/gnatrtems/lib/libiberty*
320/opt/gnatrtems/lib/libopcodes*
321
322# %dir /opt/gnatrtems/share
323# %dir /opt/gnatrtems/share/locale
324
325%files -n @target_alias@-gnat-binutils -f files.target
326%doc /opt/gnatrtems/man/man1/@target_alias@-*.1
327
328%dir /opt/gnatrtems/bin
329/opt/gnatrtems/bin/@target_alias@-addr2line@exe_ext@
330/opt/gnatrtems/bin/@target_alias@-ar@exe_ext@
331/opt/gnatrtems/bin/@target_alias@-as@exe_ext@
332/opt/gnatrtems/bin/@target_alias@-c++filt@exe_ext@
333/opt/gnatrtems/bin/@target_alias@-gasp@exe_ext@
334/opt/gnatrtems/bin/@target_alias@-ld@exe_ext@
335/opt/gnatrtems/bin/@target_alias@-nm@exe_ext@
336/opt/gnatrtems/bin/@target_alias@-objcopy@exe_ext@
337/opt/gnatrtems/bin/@target_alias@-objdump@exe_ext@
338/opt/gnatrtems/bin/@target_alias@-ranlib@exe_ext@
339# readelf is not in older binutils so get it from file list
340# /opt/gnatrtems/bin/@target_alias@-readelf@exe_ext@
341/opt/gnatrtems/bin/@target_alias@-size@exe_ext@
342/opt/gnatrtems/bin/@target_alias@-strings@exe_ext@
343/opt/gnatrtems/bin/@target_alias@-strip@exe_ext@
344
345%dir /opt/gnatrtems/@target_alias@
346%dir /opt/gnatrtems/@target_alias@/bin
347/opt/gnatrtems/@target_alias@/bin/ar@exe_ext@
348/opt/gnatrtems/@target_alias@/bin/as@exe_ext@
349/opt/gnatrtems/@target_alias@/bin/ld@exe_ext@
350/opt/gnatrtems/@target_alias@/bin/nm@exe_ext@
351/opt/gnatrtems/@target_alias@/bin/ranlib@exe_ext@
352/opt/gnatrtems/@target_alias@/bin/strip@exe_ext@
353
354%dir /opt/gnatrtems/@target_alias@/lib
355/opt/gnatrtems/@target_alias@/lib/ldscripts
356%files -n rtems-base-gnat
357%dir /opt/gnatrtems/info
358# %doc /opt/gnatrtems/info/dir
359%doc /opt/gnatrtems/info/cpp.info*
360%doc /opt/gnatrtems/info/gcc.info*
361%doc /opt/gnatrtems/info/libc.info*
362%doc /opt/gnatrtems/info/libm.info*
363
364# %dir /opt/gnatrtems/man
365# %dir /opt/gnatrtems/man/man1
366%doc /opt/gnatrtems/man/man1/cccp.1
367%doc /opt/gnatrtems/man/man1/@target_alias@-gcc.1
368
369%dir /opt/gnatrtems/bin
370# /opt/gnatrtems/bin/cpp@exe_ext@
371# /opt/gnatrtems/bin/gcov@exe_ext@
372%dir /opt/gnatrtems/include
373# /opt/gnatrtems/include/g++-3
374
375%files -n @target_alias@-gnat -f files.gcc
376/opt/gnatrtems/bin/@target_alias@-gcc@exe_ext@
377
378%dir /opt/gnatrtems/lib/gcc-lib/@target_alias@/@gcc_version@/include
379
380/opt/gnatrtems/@target_alias@
381
382%post -n @target_alias@-gnat
383  if test -d $RPM_INSTALL_PREFIX/rtems/info;
384  then
385    rm -f $RPM_INSTALL_PREFIX/rtems/info/dir
386    f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'`
387    test -n "$f" && for i in $f; do
388      install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir
389    done
390  fi
391
392%postun -n @target_alias@-gnat
393  if test -d $RPM_INSTALL_PREFIX/rtems/info;
394  then
395    rm -f $RPM_INSTALL_PREFIX/rtems/info/dir
396    f=`find $RPM_INSTALL_PREFIX/rtems/info -name '*.info.gz'`
397    test -n "$f" && for i in $f; do
398      install-info $i $RPM_INSTALL_PREFIX/rtems/info/dir
399    done
400  fi
401
Note: See TracBrowser for help on using the repository browser.