source: rtems/scripts-ada/buildall.in @ df49c60

4.104.114.84.95
Last change on this file since df49c60 was df49c60, checked in by Joel Sherrill <joel.sherrill@…>, on Jun 12, 2000 at 3:00:15 PM

Merged from 4.5.0-beta3a

  • Property mode set to 100644
File size: 4.3 KB
Line 
1#! /bin/sh
2#
3#  Generate all the specs and then cycle through building them.
4#
5
6RTEMS_DIR=`dirname $0`
7CFG=./setup.cache
8dst=@RPM_SPECSdir@
9
10usage()
11{
12  echo "$0 [options] <target_alias>"
13  echo "  options:"
14  echo "    -cfg <setup.cache>"
15  echo "    -o <rpm-spec-dir>"
16  exit 1 ;
17}
18
19while test $# -ge 1; do
20  case $1 in
21    -cfg)
22      test $# -ge 2 || usage
23      shift
24      CFG=$1
25      shift
26      ;;
27    -o)
28      test $# -ge 2 || usage
29      shift
30      dst=$1
31      shift
32      ;;
33    -*)
34      echo "invalid option $1";
35      usage
36      ;;
37    *)
38      TARGETS="${TARGETS} $1"
39      shift
40      ;;
41  esac
42done
43
44# This is the full list .. hppa1.1 does not build now.
45#ALL_TARGETS="hppa1.1-rtems i386-rtems i960-rtems m68k-rtems \
46#  m68k-rtemself mips64orion-rtems \
47#  powerpc-rtems sh-rtems sh-rtemself sparc-rtems"
48
49# This is the full buildable set.
50if [ "X${TARGETS}" = "X" ] ; then
51  TARGETS="i386-rtems i960-rtems m68k-rtems \
52    mips64orion-rtems powerpc-rtems sh-rtems sparc-rtems"
53fi
54
55. $CFG
56
57binutils=${binutils_version}
58gcc=${gcc_version}
59gnat=${gnat_version}
60gdb=${gdb_version}
61newlib=${newlib_version}
62# also use binutils_rpm_release
63buildroot=/tmp
64
65testing=no
66do_binutils=no    # binutils included in gnatnewlib
67do_gnatnewlib=yes
68do_gdb=yes
69
70#
71#  Now get started
72#
73start=`date`
74
75echo PATH=$PATH
76
77if [ ${testing} = yes ] ; then
78  ECHO=echo
79fi
80
81installed_count=`rpm -q -g gnatrtems | wc -l`
82if [ ${installed_count} -ne 0 ] ; then
83  echo This script should be run with NO rtems RPMs installed.
84  echo It appears that the following rtems RPMs are installed:
85  echo
86  rpm -qa | grep rtems
87  echo
88  echo Please remove these and restart this script.
89  exit 1
90fi
91
92echo Copying specs files.
93if [ ${testing} = no ] ; then
94  cd ${RTEMS_DIR}
95 
96  # ./configure || exit 1
97  make        || exit 1
98
99  #  Now generate all the specs
100  for target in ${TARGETS}
101  do
102    tspecs=`find . -name "${target}*"`
103    if [ "X${tspecs}" = "X" ] ; then
104      echo RPM specifications were not generated for ${tspec}.
105      exit 1
106    fi
107    ${ECHO} cp -r ${tspecs} ${dst}
108  done
109fi
110
111# clean up a bit before we start
112cd ${dst}
113test -d log || mkdir log
114
115#  do all the tools
116for target in ${TARGETS}
117do
118  if [ ${do_binutils} = yes ] ; then
119    logfile=log/${target}-binutils
120    specfile=${dst}/${target}-gnat-${gnat}-binutils-${binutils}.spec
121    echo "rpm -ba ${specfile} >${logfile} 2>&1"
122    if [ ${testing} = no ] ; then
123      rpm -ba ${specfile} >${logfile} 2>&1
124    fi
125    ${ECHO} rm -rf ${dst}/../BUILD/${target}-binutils*
126    ${ECHO} rm -rf ${buildroot}/opt/gnatrtems
127  else
128    echo Skipping binutils for ${target}
129  fi
130
131  #
132  #  build gcc/newlib
133  #
134
135  if [ ${do_gnatnewlib} = yes ] ; then
136    # now build gcc/newlib
137    #    NOTE: This requires having binutils installed and we immediately
138    #          remove it once finished.
139    # base_binutils_rpm=${dst}/../RPMS/i386/rtems-base-binutils-${binutils}-${binutils_rpm_release}.i386.rpm
140    # binutils_rpm=${dst}/../RPMS/i386/${target}-binutils-${binutils}-${binutils_rpm_release}.i386.rpm
141    # if [ ! -f ${binutils_rpm} ] ; then
142    #   echo There is no RPM for binutils for ${target}.
143    #   echo Looked for ${binutils_rpm}.
144    # fi
145    # ${ECHO} rpm -i ${base_binutils_rpm}
146    # ${ECHO} rpm -i ${binutils_rpm}
147
148    logfile=log/${target}-gnatnewlib
149    specfile=${dst}/${target}-gnat-${gnat}-newlib-${newlib}.spec
150    echo "rpm -ba ${specfile} >${logfile} 2>&1"
151    if [ ${testing} = no ] ; then
152      rpm -ba ${specfile} >${logfile} 2>&1
153    fi
154    ${ECHO} rm -rf ${dst}/../BUILD/${target}-gcc*
155    ${ECHO} rm -rf ${buildroot}/opt/gnatrtems
156
157    # echo uninstalling binutils for ${target}
158    # if [ ${testing} = no ] ; then
159    #   rpm -e `rpm -qa | grep rtems`
160    #   rm -rf /opt/gnatrtems/*
161    # fi
162  else
163    echo Skipping gcc/newlib for ${target}
164  fi
165
166  #
167  # build gdb
168  #
169
170  if [ ${do_gdb} = yes ] ; then
171    # now build gdb
172    logfile=log/${target}-gdb
173    specfile=${dst}/${target}-gnat-${gnat}-gdb-${gdb}.spec
174    echo "rpm -ba ${specfile} >${logfile} 2>&1"
175    if [ ${testing} = no ] ; then
176      rpm -ba ${specfile} >${logfile} 2>&1
177    fi
178    ${ECHO} rm -rf ${dst}/../BUILD/${target}-gdb*
179    ${ECHO} rm -rf ${buildroot}/opt/gnatrtems
180  else
181    echo Skipping gdb for ${target}
182  fi
183
184done
185
186# Now we are done
187
188stop=`date`
189
190echo
191echo "Started:  " $start
192echo "Finished: " $stop
193exit 0
Note: See TracBrowser for help on using the repository browser.