source: rtems/make/custom/vegaplus.cfg @ e68206a1

4.104.114.84.95
Last change on this file since e68206a1 was e68206a1, checked in by Joel Sherrill <joel.sherrill@…>, on Jan 20, 2005 at 6:12:20 PM

2005-01-20 Joel Sherrill <joel@…>

  • custom/arm_bare_bsp.cfg, custom/armulator.cfg, custom/csb336.cfg, custom/csb337.cfg, custom/edb7312.cfg, custom/jmr3904.cfg, custom/pc486.cfg, custom/pc586.cfg, custom/pc686.cfg, custom/pck6.cfg, custom/vegaplus.cfg: Correct use of arguments for gcc 4.x. Hopefully they are still OK for gcc 3.3.5.
  • Property mode set to 100644
File size: 1.5 KB
Line 
1#
2#  Config file for VEGAPLUS ARM BOARD --
3#
4#  $Id$
5#
6
7include $(RTEMS_ROOT)/make/custom/default.cfg
8
9RTEMS_CPU=arm
10RTEMS_CPU_MODEL=arm7tdmi
11
12# This is the actual bsp directory used during the build process.
13RTEMS_BSP_FAMILY=vegaplus
14
15#  This contains the compiler options necessary to select the CPU model
16#  and (hopefully) optimize for it.
17#
18#CPU_CFLAGS = -mcpu=arm7tdmi
19# CPU_CFLAGS = -msoft-float
20
21# optimize flag: typically -0, could use -O4 or -fast
22# -O4 is ok for RTEMS
23# NOTE2: some level of -O may be actually required by inline assembler (at least
24# -O2 so far.
25CFLAGS_OPTIMIZE_V=
26#CFLAGS_OPTIMIZE_V=-O4 -mmultiple -mstring -mstrict-align
27
28# debug flags: typically none, but at least -O1 is required due to this
29# BSP using inlined code
30CFLAGS_DEBUG_V = -O1
31#CFLAGS_DEBUG_V = -O1 -mmultiple -mstring -mstrict-align
32
33define make-exe
34        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) \
35            -static -Wl,-Map,$(basename $@).map -o $(basename $@).obj \
36            $(LINK_OBJS) $(LINK_LIBS)
37        $(OBJCOPY) -O binary \
38            --only-section=.text \
39            --only-section=.data \
40            --only-section=.rodata \
41            --strip-unneeded $(basename $@).obj $(basename $@).exe
42        $(NM) -g -n $(basename $@).obj > $(basename $@).num
43        $(SIZE) $(basename $@).obj
44        # test -d ${PROJECT_RELEASE}/bin || mkdir ${PROJECT_RELEASE}/bin
45        # f=`basename $@ .exe`; \
46        # cp $(basename $@).bin  $(basename $@).exe
47        # cp $(basename $@).bin  ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe
48endef
49
50# Miscellaneous additions go here
Note: See TracBrowser for help on using the repository browser.