source: rtems/make/custom/simhppa.cfg @ 0f012bdf

4.104.114.84.95
Last change on this file since 0f012bdf was 0f012bdf, checked in by Joel Sherrill <joel.sherrill@…>, on Nov 15, 2001 at 4:52:13 PM

2001-11-15 Ralf Corsepius <corsepiu@…>

  • custom/simhppa.cfg: Remove SIMHPPA_FAST_IDLE, make-target-options.
  • Property mode set to 100644
File size: 2.9 KB
Line 
1#
2#  Config file for the 7100 pa-risc simulator
3#
4#  $Id$
5#
6
7include $(RTEMS_ROOT)/make/custom/default.cfg
8
9RTEMS_CPU=hppa1.1
10RTEMS_CPU_MODEL=hppa7200
11
12# This is the actual bsp directory used during the build process.
13RTEMS_BSP_FAMILY=simhppa
14
15#  This contains the compiler options necessary to select the CPU model
16#  and (hopefully) optimize for it.
17#
18#  Possibles:
19#  -mpa-risc-1-1        -- HPPA 1.1 instead of 1.0
20#  -mportable-runtime
21#
22CPU_CFLAGS = -mpa-risc-1-1 -mportable-runtime
23
24# Possibles:
25#  -Wall                -- lots of warnings
26#  -pipe                -- compiler uses pipes to talk to phases (usually faster)
27#  -mgas                -- we are using gas as assembler
28#  -fno-keep-inline-functions  -- do not emit any inlines as static
29CFLAGS_DEFAULT = $(CPU_CFLAGS) -Wall -mgas
30
31# optimize flag: typically -0, could use -O4 or -fast
32# -O4 is ok for RTEMS
33# NOTE: some level of -O may be actually required by inline assembler
34CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
35
36# GNU ld options
37#   `-Tbss ORG'
38#   `-Tdata ORG'
39#   `-Ttext ORG'
40#      Use ORG as the starting address for--respectively--the `bss',
41#      `data', or the `text' segment of the output file.  ORG must be a
42#      single hexadecimal integer; for compatibility with other linkers,
43#      you may omit the leading `0x' usually associated with hexadecimal
44#      values.
45
46# 'NODE' is set to 1 or 2 for multi cpu tests (ref: mptests/mp01/node1/Makefile)
47# If NODE is set as an environment variable, don't trust it, zero it out.
48# (NODE turns out to be a very common environment variable)
49ifeq (,$(NODE))
50NODE=0
51else
52ifeq "$(origin NODE)" "environment"
53NODE=0
54endif
55endif
56
57# XXX some/all of this should move into 'linkcmds'
58# single processor
59DATA_0_BASE=0x40001000
60TEXT_0_BASE=0x00001000
61
62# first node (mptests number them from 1)
63DATA_1_BASE=$(DATA_0_BASE)
64TEXT_1_BASE=$(TEXT_0_BASE)
65
66# second node (mptests number them from 1)
67DATA_2_BASE=0x48001000
68TEXT_2_BASE=0x08001000
69
70# for hpux ld
71#LD_LOC_OPTIONS=-D $(DATA_$(NODE)_BASE) -R $(TEXT_$(NODE)_BASE)
72# for gnu ld
73LD_LOC_OPTIONS=-Tdata $(DATA_$(NODE)_BASE) -Ttext $(TEXT_$(NODE)_BASE)
74GCC_LD_LOC_OPTIONS=-W,l-T -W,ldata -W,l$(DATA_$(NODE)_BASE) \
75                   -W,l-T -W,ltext -W,l$(TEXT_$(NODE)_BASE)
76
77# The following are definitions of make-exe which will work using ld as
78# is currently required.  It is expected that as of gcc 2.8, the end user
79# will be able to override parts of the compilers specs and link using gcc.
80
81ifeq ($(RTEMS_USE_GCC272),yes)
82define make-exe
83        $(LDARGS) $(LD) $(LD_LOC_OPTIONS) $(XLDFLAGS) -a archive \
84            -o $@ -u atexit \
85            $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
86        $(NM) -g -n $@ > $(basename $@).num
87        $(SIZE) $@
88endef
89else
90define make-exe
91        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) $(GCC_LD_LOC_OPTIONS) \
92            -o $@ \
93            $(LINK_OBJS) $(LINK_LIBS)
94        $(NM) -g -n $@ > $(basename $@).num
95        $(SIZE) $@
96endef
97endif
98
99# Miscellaneous additions go here
100
101# BSP-specific tools
102PRINTDUMP=$(PROJECT_TOOLS)/print_dump
Note: See TracBrowser for help on using the repository browser.