1 | # |
---|
2 | # Config file for the PC 386 BSP |
---|
3 | # |
---|
4 | # $Id$ |
---|
5 | # |
---|
6 | |
---|
7 | include $(RTEMS_ROOT)/make/custom/default.cfg |
---|
8 | |
---|
9 | RTEMS_CPU=i386 |
---|
10 | RTEMS_CPU_MODEL=i386_fp |
---|
11 | |
---|
12 | # This is the actual bsp directory used during the build process. |
---|
13 | RTEMS_BSP_FAMILY=pc386 |
---|
14 | |
---|
15 | # This contains the compiler options necessary to select the CPU model |
---|
16 | # and (hopefully) optimize for it. |
---|
17 | # |
---|
18 | CPU_CFLAGS = |
---|
19 | |
---|
20 | # optimize flag: typically -0, could use -O4 or -fast |
---|
21 | # -O4 is ok for RTEMS |
---|
22 | CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer |
---|
23 | |
---|
24 | # Define this to yes if this target supports multiprocessor environments. |
---|
25 | HAS_MP=no |
---|
26 | |
---|
27 | # This target does NOT support the KA9Q TCP/IP stack so ignore requests |
---|
28 | # to enable it. |
---|
29 | HAS_KA9Q=no |
---|
30 | |
---|
31 | # This section makes the target dependent options file. |
---|
32 | |
---|
33 | # NDEBUG (C library) |
---|
34 | # if defined asserts do not generate code. This is commonly used |
---|
35 | # as a command line option. |
---|
36 | # |
---|
37 | # RTEMS_TEST_NO_PAUSE (RTEMS tests) |
---|
38 | # do not pause between screens of output in the rtems tests |
---|
39 | # |
---|
40 | # RTEMS_DEBUG (RTEMS) |
---|
41 | # If defined, debug checks in RTEMS and support library code are enabled. |
---|
42 | |
---|
43 | define make-target-options |
---|
44 | @echo "/* #define NDEBUG 1 */ " >>$@ |
---|
45 | @echo "/* #define RTEMS_TEST_NO_PAUSE 1 */" >>$@ |
---|
46 | @echo "/* #define RTEMS_DEBUG 1 */" >>$@ |
---|
47 | endef |
---|
48 | |
---|
49 | # Here is the rule to actually build a $(ARCH)/foo.exe |
---|
50 | # It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm |
---|
51 | # Usage ref: src/tests/sptest/sp1/Makefile |
---|
52 | |
---|
53 | #+--------------------------------------------------------------------------+ |
---|
54 | #| Set the value of RELOCADDR to the address where you want your image to |
---|
55 | #| load. If you'll be using GRUB to load the images it will have to be >= |
---|
56 | #| 0x100000 (1024K). If you are using NetBoot to load the images it can be |
---|
57 | #| >= 0x10000 (64K) AND <= 0x97C00 (607K) OR >= 0x100000 (1024K). The memory |
---|
58 | #| top is of course another limit. Make sure there is enough space before the |
---|
59 | #| upper memory limits for the image and the memory allocated by it to fit. |
---|
60 | #| Make sure the value you choose is aligned to 4 bytes. |
---|
61 | #+--------------------------------------------------------------------------+ |
---|
62 | RELOCADDR=0x00100000 |
---|
63 | |
---|
64 | START16FILE=$(PROJECT_RELEASE)/lib/start16.bin |
---|
65 | START16ADDR=0x00097C00 |
---|
66 | HEADERADDR=0x00097E00 |
---|
67 | |
---|
68 | # The following are definitions of make-exe which will work using ld as |
---|
69 | # is currently required. It is expected that as of gcc 2.8, the end user |
---|
70 | # will be able to override parts of the compilers specs and link using gcc. |
---|
71 | |
---|
72 | ifeq ($(RTEMS_USE_GCC272),yes) |
---|
73 | define make-exe |
---|
74 | $(LD) -N -T $(LINKCMDS) -Ttext $(RELOCADDR) -e start -nostdlib \ |
---|
75 | -o $(basename $@).obj \ |
---|
76 | $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group |
---|
77 | $(OBJCOPY) -O a.out-i386 --remove-section=.rodata --strip-unneeded \ |
---|
78 | $(basename $@).obj $@ |
---|
79 | $(OBJCOPY) -O binary $(basename $@).obj $(basename $@).bin |
---|
80 | $(PROJECT_TOOLS)/bin2boot -v $(basename $@).bin $(HEADERADDR)\ |
---|
81 | $(START16FILE) $(START16ADDR) 0 $(basename $@).bin $(RELOCADDR) 0 |
---|
82 | $(NM) -g -n $(basename $@).obj > $(basename $@).num |
---|
83 | $(SIZE) $(basename $@).obj |
---|
84 | $(INSTALL_VARIANT) -m 555 $(basename $@).bt ${PROJECT_RELEASE}/BootImgs |
---|
85 | endef |
---|
86 | else |
---|
87 | define make-exe |
---|
88 | $(CC) $(CFLAGS) $(CFLAGS_LD) -Ttext $(RELOCADDR) -o $(basename $@).obj $(LINK_OBJS) |
---|
89 | $(OBJCOPY) -O a.out-i386 --remove-section=.rodata --strip-unneeded \ |
---|
90 | $(basename $@).obj $@ |
---|
91 | $(OBJCOPY) -O binary $(basename $@).obj $(basename $@).bin |
---|
92 | $(PROJECT_TOOLS)/bin2boot -v $(basename $@).bt $(HEADERADDR)\ |
---|
93 | $(START16FILE) $(START16ADDR) 0 $(basename $@).bin $(RELOCADDR) 0 |
---|
94 | $(NM) -g -n $(basename $@).obj > $(basename $@).num |
---|
95 | $(SIZE) $(basename $@).obj |
---|
96 | $(INSTALL_VARIANT) -m 555 $(basename $@).bt ${PROJECT_RELEASE}/BootImgs |
---|
97 | endef |
---|
98 | endif |
---|
99 | |
---|
100 | # Miscellaneous additions go here |
---|
101 | |
---|