source: rtems/make/custom/p4650.cfg @ 9e52b29

4.104.114.84.95
Last change on this file since 9e52b29 was 9e52b29, checked in by Joel Sherrill <joel.sherrill@…>, on Jul 11, 2000 at 3:26:40 PM

Patch rtems-rc-20000711-2-cvs.diff from Ralf Corsepius <corsepiu@…>
that removes setting unused variables WORKSPACE_MB and HEAPSPACE_MB.

  • Property mode set to 100644
File size: 2.3 KB
Line 
1#
2#  Config file for the algorithmics p4000 evaluation board with R4650 cpu
3#
4#  $Id$
5#
6
7include $(RTEMS_ROOT)/make/custom/default.cfg
8
9RTEMS_CPU=mips64orion
10RTEMS_CPU_MODEL=R4650
11
12# This is the actual bsp directory used during the build process.
13RTEMS_BSP_FAMILY=p4000
14
15CPU_CFLAGS=-m4650 -G0
16CCMIPS_CFLAGS_CPU=-cpu=r4650
17
18CPU_DEFINES+=-DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3
19
20#  This section makes the target dependent options file.
21
22#  NDEBUG (C library)
23#     if defined asserts do not generate code.  This is commonly used
24#     as a command line option.
25#
26#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
27#     do not pause between screens of output in the rtems tests
28#
29#  RTEMS_DEBUG (RTEMS)
30#     If defined, debug checks in RTEMS and support library code are enabled.
31#
32
33define make-target-options
34        @echo "/* #define NDEBUG 1 */ "                     >>$@
35        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
36        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@
37endef
38
39
40# optimize flag: typically -0, could use -O4 or -fast
41# -O4 is ok for RTEMS
42CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
43
44# The following are definitions of make-exe which will work using ld as
45# is currently required.  It is expected that as of gcc 2.8, the end user
46# will be able to override parts of the compilers specs and link using gcc.
47
48ifeq ($(RTEMS_USE_GCC272),yes)
49# This rule was used in 3.6.0
50#       $(CC) $(LDFLAGS) -nostdlib -o $(basename $@).exe \
51#           -T$(PROJECT_RELEASE)/lib/linkcmds $(LINK_FILES) $(LD_PATHS:%=-L %)
52
53define make-exe
54        $(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).exe \
55            $(START_FILE) $(LINK_OBJS) \
56            --start-group $(LINK_LIBS) --end-group $(LD_LIBS)
57        $(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
58        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
59        $(RM) $(basename $@).srec1
60        $(NM) -n $(basename $@).exe > $(basename $@).num
61        $(SIZE) $(basename $@).exe
62endef
63else
64define make-exe
65        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@).exe \
66            $(LINK_OBJS) $(LINK_LIBS) $(LD_LIBS)
67        $(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
68        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
69        $(RM) $(basename $@).srec1
70        $(NM) -n $(basename $@).exe > $(basename $@).num
71        $(SIZE) $(basename $@).exe
72endef
73endif
74
75# Miscellaneous additions go here
Note: See TracBrowser for help on using the repository browser.