source: rtems/make/custom/p4600.cfg @ f8b891d

4.104.114.84.95
Last change on this file since f8b891d was f8b891d, checked in by Joel Sherrill <joel.sherrill@…>, on 01/08/01 at 18:14:01

2001-01-08 Joel Sherrill <joel@…>

  • custom/p4000.cfg, custom/p4600.cfg, custom/p4650.cfg: Remove unneeded definitions when compiled for "mips" rather than "mips64orion." Correct CPU_CFLAGS.
  • Property mode set to 100644
File size: 1.8 KB
Line 
1#
2#  Config file for the algorithmics p4000 evaluation board with R4600 cpu
3#
4#  $Id$
5#
6
7include $(RTEMS_ROOT)/make/custom/default.cfg
8
9RTEMS_CPU_MODEL=R4600
10
11# This is the actual bsp directory used during the build process.
12RTEMS_BSP_FAMILY=p4000
13
14CPU_CFLAGS=-mcpu=4600 -G0
15CCMIPS_CFLAGS_CPU=-cpu=r4600
16
17ifeq ($(RTEMS_CPU),mips64orion)
18CPU_DEFINES+=-DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3
19endif
20
21#  This contains the compiler options necessary to select the CPU model
22#  and (hopefully) optimize for it.
23CPU_CFLAGS = -mips3 -G0
24
25#  This section makes the target dependent options file.
26define make-target-options
27endef
28
29# optimize flag: typically -0, could use -O4 or -fast
30# -O4 is ok for RTEMS
31CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
32
33# The following are definitions of make-exe which will work using ld as
34# is currently required.  It is expected that as of gcc 2.8, the end user
35# will be able to override parts of the compilers specs and link using gcc.
36
37ifeq ($(RTEMS_USE_GCC272),yes)
38# This rule was used in 3.6.0
39#       $(CC) $(LDFLAGS) -nostdlib -o $(basename $@).exe \
40#           -T$(PROJECT_RELEASE)/lib/linkcmds $(LINK_FILES) $(LD_PATHS:%=-L %)
41
42define make-exe
43        $(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).exe \
44            $(START_FILE) $(LINK_OBJS) \
45            --start-group $(LINK_LIBS) --end-group
46        $(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
47        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
48        $(RM) $(basename $@).srec1
49        $(NM) -n $(basename $@).exe > $(basename $@).num
50        $(SIZE) $(basename $@).exe
51endef
52else
53define make-exe
54        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) \
55            -o $@ $(LINK_OBJS) $(LINK_LIBS)
56        $(OBJCOPY) -O srec $@ $(basename $@).srec1
57        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
58        $(RM) $(basename $@).srec1
59        $(NM) -n $@ > $(basename $@).num
60        $(SIZE) $@
61endef
62endif
63
64# Miscellaneous additions go here
65
Note: See TracBrowser for help on using the repository browser.