source: rtems/make/custom/p4000.cfg @ 98100d2

4.104.114.84.95
Last change on this file since 98100d2 was 98100d2, checked in by Joel Sherrill <joel.sherrill@…>, on 06/27/98 at 17:09:47

Monstrous patch from Ralf Corsepius <corsepiu@…>. I have
made no attempt to divide the comments up and place them with just
the appropriate files. Here is an excerpt from Ralf's email:

Changes including comments on changes I made after cycling through
all the targets:

  • Added ranlib support. Now all targets use "ranlib" instead of "ar -s" to build an index for a library. If ranlib isn't detected during configuration, check if ar -s is working and try "ar -s" instead of
  • Removed $(XXX_FOR_TARGET) from make/target.cfg.in, use $(XXX) instead now.
  • gcc-target-default.cfg: LINK_XXXX-defines reworked to solve the -l problem under posix (cf gcc-target-default.cfg)
  • rtems-glom replaced by Makefile-rules inside of the wrapup/Makefile.in that has been using rtems-glom until now.
  • Removed CCC and friends in gcc-target-default.cfg, as they have been breaking CXX support.
  • Removed CONFIG.$(TARGET_ARCH).CC lines from several custom/*.cfg files, because this is now set in custom/default.cfg.
  • Added aclocal/ar-s.m4, check whether "ar -s" is working
  • Added aclocal/cygwin.m4 and aclocal/exeext.m4.
  • Reworked aclocal/canonicalize-tools.m4: Added ar -s check; fixes for problems when XXX_FOR_TARGET is given via environment variables (didn't work for gcc until now), adding cygwin check, improved autoconf-cache handling.
  • Removed -l from make rule dependencies. LINK_LIBS is now allowed to contain -L and -l. LINK_OBJS and LINK_FILES must not contain -L or -l. gcc28 make-exe rules now link using $(LINK_OBJS) $(LINK_LIBS) => Almost all custom/*.cfg are modified. This is very likely to break something because of typos or having missed to edit a file.

Open problems, known bugs, things I didn't do:

  • custom/p4000.cfg seems to be out of date and requires to be reviewed.

(JRS NOTE: It is subordinate p4650 and p4600 -- both of which build ok

after minor changes.)

  • custom/psim.cfg needs to be reviewed, I added some changes to it, I am insecure about.

(JRS NOTE: psim had a minor problem endif/endef swapped but runs fine.)

  • rtems-glom.in can now be removed.
  • gcc*.cfg files "make depend" rules don't honor language specific flags (e.g CXXFLAGS is ignored for *.cc) - Nothing to worry about now, but may cause problems for hosts/targets not using gcc or rtems-add-ons that use external packages.
  • AFAIS, the no_bsp BSP can't be build anymore, i.e. configure refused to configure for it whatever I tried.
  • The toplevel and toplevel+1 README files are quite out-dated
  • cygwin.m4 isn't of much use for rtems. In most cases (cf. aclocal/*.m4) it is worked around by directly using $host_os. I think I'll remove it soon after the next snapshot
  • Before release the cygwin patch needs to be tested under cygwin. I may have broken/missed something (esp. the sed-pattern to convert
    into / may be broken).
  • You should try to build/run the posix-BSP under solaris - I don't expect problems, but I am not 100% sure, esp. with regard to ranlib/ar -s.
  • You should consider to convert all make/compilers/*.cfg files into make/compilers/*.cfg.in files and let autoconf generate the *.cfg. This may help getting rid of some if/then/else statements and help hard-coding some defines into those files in future and shouldn't disturb now.
  • Not having installed libc.a/libm.a on a host may still break building rtems, esp. when using -disable-gcc28 as the gcc27-configuration scheme directly accesses libc.a and libm.a. The problem should not appear when using gcc28 because it references libc/libm only through -lc and -lm which may be static or dynamic (I didn't test this).
  • shgen is not yet included (I didn't yet have enough time to integrate it).
  • I know about a few more configure-probs (esp. cross-checking --enable-* flags).

+ warn/refuse to configure when --enable-libcdir and

--enable-gcc28 are given.

+ force --enable-libcdir when --disable-gcc28 is given

  • Replaced KSHELL with @KSH@ in some shell scripts generated by configure.in.
  • Added a dependency to aclocal/*.m4 in the toplevel Makefile => configure and aclocal.m4 will now be rebuild when any aclocal/*.m4 file is changed
  • Some changes to aclocal/gcc-pipe.m4 and aclocal/gcc-specs.m4
  • Replaced i3456?86-unknown-freebsd2.12? with i3456?86-*freebsd2.* in configure.in, as I suppose there might exist a variety of valid vendors (2nd field of the name-tripple)
  • Disabled override MAKEFLAGS in toplevel Makefile.in - Potential side-effects are not really clear to me.
  • In mvme162.cfg, $(LINK_LIBS) is missing in the CC line in gcc28's make-exe rule (yet another one I missed to edit). Just append $(LINK_LIBS) to the "CC" line, like I hopefully did to ALL other custom/*.cfg files.
  • the problem with mvme162lx.cfg is a follow-up problem of the mvme162.cfg-bug.
  • mvme162/console and idp/console had variables named Buffer which conflicted with similarly named variables in some tests.
  • Property mode set to 100644
File size: 2.4 KB
Line 
1#
2#  Config file for the algorithmics p4000 evaluation board
3#
4#  $Id$
5#
6
7# Override default start file
8START_BASE=idt_csu
9
10CPU_DEFINES+=-DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3
11
12# This is the actual bsp directory used during the build process.
13RTEMS_BSP_FAMILY=p4000
14
15# This target does NOT support the KA9Q TCP/IP stack so ignore requests
16# to enable it.
17HAS_KA9Q=no
18
19#  This section makes the target dependent options file.
20
21#  NDEBUG (C library)
22#     if defined asserts do not generate code.  This is commonly used
23#     as a command line option.
24#
25#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
26#     do not pause between screens of output in the rtems tests
27#
28#  RTEMS_DEBUG (RTEMS)
29#     If defined, debug checks in RTEMS and support library code are enabled.
30#
31#  WORKSPACE_MB (p4000)
32#     Defines the size in Megabytes of the RTEMS Workspace.
33#
34#  HEAPSPACE_MB (p4000)
35#     Defines the size in Megabytes of the C Program Heap.
36
37define make-target-options
38        @echo "/* #define NDEBUG 1 */ "                     >>$@
39        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
40        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@
41        @echo "#define WORKSPACE_MB 2"                      >>$@
42        @echo "#define HEAPSPACE_MB 1"                      >>$@
43endef
44
45
46# optimize flag: typically -0, could use -O4 or -fast
47# -O4 is ok for RTEMS
48CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
49
50# The following are definitions of make-exe which will work using ld as
51# is currently required.  It is expected that as of gcc 2.8, the end user
52# will be able to override parts of the compilers specs and link using gcc.
53
54ifeq ($(RTEMS_USE_GCC272),yes)
55define make-exe
56        $(CC) $(LDFLAGS) -nostdlib -o $(basename $@).exe \
57            -T$(PROJECT_RELEASE)/lib/linkcmds $(LINK_OBJS) $(LINK_LIBS) $(LD_PATHS:%=-L %)
58        $(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
59        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
60        $(RM) $(basename $@).srec1
61        $(NM) -n $(basename $@).exe > $(basename $@).num
62        $(SIZE) $(basename $@).exe
63endef
64else
65define make-exe
66        $(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe \
67            $(LINK_OBJS) $(LINK_LIBS)
68        $(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
69        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
70        $(RM) $(basename $@).srec1
71        $(NM) -n $(basename $@).exe > $(basename $@).num
72        $(SIZE) $(basename $@).exe
73endef
74endif
75
76# Miscellaneous additions go here
77
Note: See TracBrowser for help on using the repository browser.