source: rtems/make/custom/mbx8xx.cfg @ f5642664

4.104.114.84.95
Last change on this file since f5642664 was f5642664, checked in by Joel Sherrill <joel.sherrill@…>, on 08/02/02 at 00:08:01

2002-08-01 Joel Sherrill <joel@…>

  • eth_comm.cfg, mbx821_001.cfg, mbx860_002.cfg, mbx860_005b.cfg, mbx8xx.cfg, mpc8260ads.cfg: Per PR260 removed make-target-options.
  • Property mode set to 100644
File size: 2.1 KB
Line 
1#
2#  Config file for a PowerPC MPC821- or MPC860-based MBX card
3#
4#  This file is derived from:
5#
6#  Config file for a PowerPC 403 based helas403 card
7#  Config file for MPC860 based Ethernet Comm Board
8#
9
10include $(RTEMS_ROOT)/make/custom/default.cfg
11
12RTEMS_CPU=powerpc
13RTEMS_CPU_MODEL=mpc$(8XX_CPU_TYPE)
14
15# This is the actual bsp directory used during the build process.
16RTEMS_BSP_FAMILY=mbx8xx
17
18#  This section makes the target dependent options file.
19#
20#  Note that RTEMS_BSP matches the RTEMS_MBX_MODEL. Its value must be
21#  defined in targopts.h, so the few places that require different code
22#  for different MBX models can be distinguished. The value of
23#  RTEMS_BSP is already defined in targopts.h and is one of:
24#     mbx860_001    mbx821_001
25#     mbx860_002    mbx821_002
26#     mbx860_003    mbx821_003
27#     mbx860_004    mbx821_004
28#     mbx860_005    mbx821_005
29#     mbx860_001b   mbx821_001b
30#     mbx860_002b   mbx821_002b
31#     mbx860_003b   mbx821_003b
32#     mbx860_004b   mbx821_004b
33#     mbx860_005b   mbx821_005b
34#     mbx860_006b   mbx821_006b
35
36#  The specific CPU model is defined, so the few places that require
37#  different code for the MPC860 and MPC821 can be distinguished.
38#  Either mpc860 or mpc821 is defined.
39#
40#  MBX8xx-specific options:
41#
42
43#  This contains the compiler options necessary to select the CPU model
44#  and (hopefully) optimize for it.
45#
46CPU_CFLAGS = -mcpu=$(8XX_CPU_TYPE) -Dmpc$(8XX_CPU_TYPE) -D$(RTEMS_MBX_MODEL)
47
48CFLAGS_DEBUG_V += -ggdb
49CXXFLAGS_DEBUG_V += -ggdb
50
51# optimize flag: typically -O, could use -O4 or -fast
52# -O4 is ok for RTEMS
53# NOTE: some level of -O may be actually required by inline assembler
54# CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
55CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
56CXXFLAGS_OPTIMIZE_V=-O4
57
58define make-exe
59        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) $(MBX8xx_LDFLAGS) \
60            -o $(basename $@)_sym.exe $(LINK_OBJS) $(LINK_LIBS)
61        $(NM) -g -n $(basename $@)_sym.exe > $(basename $@).nm
62        cp $(basename $@)_sym.exe $(basename $@).exe
63        $(STRIP) $(basename $@).exe
64        $(SIZE) $(basename $@)_sym.exe
65endef
66
67# Miscellaneous additions go here
68
69# Override default start file
70START_BASE=
71
Note: See TracBrowser for help on using the repository browser.