[4a238002] | 1 | # |
---|
| 2 | # gensh2.cfg |
---|
| 3 | # |
---|
| 4 | # default configuration for Hitachi sh1 processors |
---|
| 5 | # |
---|
| 6 | # Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) |
---|
| 7 | # |
---|
| 8 | # $Id$ |
---|
| 9 | # |
---|
| 10 | |
---|
| 11 | HZ:=29491200 |
---|
| 12 | |
---|
| 13 | include $(RTEMS_ROOT)/make/custom/default.cfg |
---|
| 14 | |
---|
| 15 | RTEMS_CPU=sh |
---|
| 16 | RTEMS_CPU_MODEL=sh7045 |
---|
| 17 | |
---|
| 18 | # This is the actual bsp directory used during the build process. |
---|
| 19 | RTEMS_BSP_FAMILY=gensh2 |
---|
| 20 | |
---|
| 21 | # BSP specific preprocessor flags. |
---|
| 22 | # These should only be used in BSP dependent directories. |
---|
| 23 | BSP_CPPFLAGS=-DHZ=$(HZ) |
---|
| 24 | |
---|
| 25 | # |
---|
| 26 | # This contains the compiler options necessary to select the CPU model |
---|
| 27 | # and (hopefully) optimize for it. |
---|
| 28 | # |
---|
| 29 | CPU_CFLAGS= -m2 |
---|
| 30 | |
---|
[df49c60] | 31 | # debug flags: opt. is needed to fit in RAM. '-O1' has shown bad side- |
---|
| 32 | # effects by failing to set up some hardware I/O registers in |
---|
| 33 | # c/src/lib/libbsp/sh/gensh2/startup/hw_init.c (and perhaps elsewhere), |
---|
| 34 | # which prevented proper chip initialization and muted SCI1 output. |
---|
| 35 | CFLAGS_DEBUG_V = -O4 -g |
---|
[4a238002] | 36 | |
---|
| 37 | # optimize flag: typically -0, could use -O4 or -fast |
---|
| 38 | # -O4 is ok for RTEMS |
---|
| 39 | CFLAGS_OPTIMIZE_V = -O4 |
---|
| 40 | |
---|
| 41 | # This section makes the target dependent options file. |
---|
| 42 | |
---|
| 43 | # STANDALONE_EVB |
---|
| 44 | # This switch compiles code to jump-start from FLASH, without a monitor |
---|
| 45 | # |
---|
[8b91282] | 46 | # START_HW_INIT |
---|
[df49c60] | 47 | # This switch selects whether 'early_hw_init()' is called from |
---|
| 48 | # 'start.S'; 'bsp_hw_init()' is always called from 'bspstart.c' |
---|
[8b91282] | 49 | # |
---|
[4a238002] | 50 | |
---|
| 51 | define make-target-options |
---|
| 52 | @echo "#define RTEMS_TEST_IO_STREAM 1" >>$@ |
---|
| 53 | @echo "/* #define STANDALONE_EVB 1 */" >>$@ |
---|
[df49c60] | 54 | @echo "#define START_HW_INIT 1" >>$@ |
---|
[4a238002] | 55 | endef |
---|
| 56 | |
---|
| 57 | # The following are definitions of make-exe which will work using ld as |
---|
| 58 | # is currently required. It is expected that as of gcc 2.8, the end user |
---|
| 59 | # will be able to override parts of the compilers specs and link using gcc. |
---|
| 60 | |
---|
| 61 | define make-exe |
---|
[df49c60] | 62 | $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -Wl,-Map,$(basename $@).map \ |
---|
[0ff37e68] | 63 | $(LDLIBS) -o $@ \ |
---|
[4c46630] | 64 | $(LINK_OBJS) $(LINK_LIBS) -lstdc++ |
---|
[0ff37e68] | 65 | $(NM) -n $@ > $(basename $@).num |
---|
| 66 | $(SIZE) $@ |
---|
[4a238002] | 67 | endef |
---|
| 68 | |
---|
| 69 | # Miscellaneous additions go here |
---|