source: rtems/make/custom/efi332.cfg @ 28e7d7fa

4.104.114.84.95
Last change on this file since 28e7d7fa was 28e7d7fa, checked in by Joel Sherrill <joel.sherrill@…>, on Aug 20, 1998 at 10:04:22 PM

Patches from Eric Norum

  • Property mode set to 100644
File size: 2.3 KB
Line 
1#
2#  Config file for the efi332 BSP
3#
4#  $Id$
5#
6
7include $(RTEMS_ROOT)/make/custom/default.cfg
8
9RTEMS_CPU=m68k
10RTEMS_CPU_MODEL=m68332
11
12# This is the actual bsp directory used during the build process.
13RTEMS_BSP_FAMILY=efi332
14
15#  This contains the compiler options necessary to select the CPU model
16#  and (hopefully) optimize for it.
17#
18# XXX JRS - my gas does not grok -m68332
19#CPU_CFLAGS = -m68332
20CPU_CFLAGS = -m68020
21
22# optimize flag: typically -0, could use -O4 or -fast, -O4 is ok for RTEMS
23CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
24
25# This target does NOT support the TCP/IP stack so ignore requests
26# to enable it.
27HAS_NETWORKING=no
28
29# Override default start file
30START_BASE=start332
31
32#  This section makes the target dependent options file.
33#  NDEBUG (C library)
34#     if defined asserts do not generate code.  This is commonly used
35#     as a command line option.
36#
37#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
38#     do not pause between screens of output in the rtems tests
39#
40#  RTEMS_DEBUG (RTEMS)
41#     If defined, debug checks in RTEMS and support library code are enabled.
42
43define make-target-options
44        @echo "/* #define NDEBUG 1 */ "                     >>$@
45        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
46        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@
47endef
48
49# The following are definitions of make-exe which will work using ld as
50# is currently required.  It is expected that as of gcc 2.8, the end user
51# will be able to override parts of the compilers specs and link using gcc.
52
53ifeq ($(RTEMS_USE_GCC272),yes)
54define make-exe
55        $(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).nxe \
56            $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
57        $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
58        $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
59            $(PROJECT_TOOLS)/packhex > $(basename $@).exe
60        $(NM) -g -n $(basename $@).nxe > $(basename $@).num
61        $(SIZE) $(basename $@).nxe
62endef
63else
64define make-exe
65        $(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).nxe \
66            $(LINK_OBJS) $(LINK_LIBS)
67        $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
68        $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
69            $(PROJECT_TOOLS)/packhex > $(basename $@).exe
70        $(NM) -g -n $(basename $@).nxe > $(basename $@).num
71        $(SIZE) $(basename $@).nxe
72endef
73endif
74
75
76# Miscellaneous additions go here
Note: See TracBrowser for help on using the repository browser.