source: rtems/make/custom/cvme961.cfg @ 97e2729d

4.104.114.84.95
Last change on this file since 97e2729d was 97e2729d, checked in by Joel Sherrill <joel.sherrill@…>, on Nov 23, 1998 at 5:38:09 PM

Added --disable-multiprocessing flag and modified a lot of files to make
it work.

  • Property mode set to 100644
File size: 2.1 KB
Line 
1#
2#  Config file for the Cyclone i960ca CVME961 BSP
3#
4#  $Id$
5#
6
7include $(RTEMS_ROOT)/make/custom/default.cfg
8
9RTEMS_CPU=i960
10RTEMS_CPU_MODEL=i960ca
11
12# This is the actual bsp directory used during the build process.
13RTEMS_BSP_FAMILY=cvme961
14
15#  This contains the compiler options necessary to select the CPU model
16#  and (hopefully) optimize for it.
17#
18CPU_CFLAGS = -mca
19
20# -pipe does not work in our local configuration of FSF GCC 2.6.0
21# configured on top of Intel Release 2.4.  We did this to replace
22# the GCC 2.4.5 shipped with Intel Release 2.4.
23
24# optimize flag: typically -0, could use -O4 or -fast
25# -O4 is ok for RTEMS
26CFLAGS_OPTIMIZE_V=-O4 -mleaf-procedures
27
28# This target does NOT support the TCP/IP stack so ignore requests
29# to enable it.
30HAS_NETWORKING=no
31
32#  This section makes the target dependent options file.
33
34#  NDEBUG (C library)
35#     if defined asserts do not generate code.  This is commonly used
36#     as a command line option.
37#
38#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
39#     do not pause between screens of output in the rtems tests
40#
41#  NO_TABLE_MOVE (SPARC PORT)
42#     do not have a second trap table -- use the BSP's
43#
44#  RTEMS_DEBUG (RTEMS)
45#     If defined, debug checks in RTEMS and support library code are enabled.
46
47define make-target-options
48        @echo "/* #define NDEBUG 1 */ "                     >>$@
49        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
50        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@
51endef
52
53# The following are definitions of make-exe which will work using ld as
54# is currently required.  It is expected that as of gcc 2.8, the end user
55# will be able to override parts of the compilers specs and link using gcc.
56
57ifeq ($(RTEMS_USE_GCC272),yes)
58
59define make-exe
60        $(LD) -u _sbrk $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).exe \
61             $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
62        $(NM) -g -n $(basename $@).exe > $(basename $@).num
63        $(SIZE) $(basename $@).exe
64endef
65
66else
67define make-exe
68        $(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe \
69            $(LINK_OBJS) $(LINK_LIBS)
70        $(NM) -g -n $(basename $@).exe > $(basename $@).num
71        $(SIZE) $(basename $@).exe
72endef
73endif
74
75# Miscellaneous additions go here
76
Note: See TracBrowser for help on using the repository browser.