source: rtems/make/compilers/gcc-portsw.cfg @ 4cc89bd

4.104.114.84.95
Last change on this file since 4cc89bd was a110b68, checked in by Joel Sherrill <joel.sherrill@…>, on 02/18/99 at 17:55:49

Part of automake VI patch from Ralf Corsepius <corsepiu@…>:

2) rtems-rc-19990131-1.diff

Rework of compilers/*.cfg files (esp. gcc-target-default.cfg) to adapt
the flags/makefile variables to automake and make standards (cf.
make.info - implicit rules/variables).

This patch is rather risky and may probably break things, but is an
essential step towards automake.

FWIW: It also reverts the i386-ASMFLAGS/ASFLAGS-patch, which was wrong,
as I had to experience ;-.

  • Property mode set to 100644
File size: 7.9 KB
Line 
1#
2#  gcc-no_bsp.cfg,v 1.13 1995/12/19 19:59:57 joel Exp
3#
4# This is for the amd29k portsw board.
5#
6# THIS IS NOT A GNU TOOLS BASED PORT!!!
7#
8
9# Prefix on the installed GNU tools
10#  Just use the native tools
11GNU_TOOLS_PREFIX=
12
13# Additional target names (other than debug, profile)
14TARGET_VARIANTS +=
15
16#
17# Pre-processor defines.
18# Local tailoring (on the command line) can be done by setting XCPPFLAGS
19# which is never set in the Makefile's
20#
21# Possible defines include:
22#       -DRTEMS_LIBC            using libc bundled with RTEMS
23#       -DRTEMS_NEWLIB          using CYGNUS libc
24#       -DMALLOC_PROVIDED       must be used for newlib reent struct
25
26DEFINES:= $(LIBC_DEFINES)
27
28GCC_INCLUDE=.
29
30#  Note: normally we do not want the standard include files
31#        Also we usually include a "libc_include" directory
32CPPFLAGS=$(XCPPFLAGS) $(DEFINES) \
33  -I$(RTEMS_LIBC_DIR)/include \
34  -I$(PROJECT_INCLUDE) \
35  -I/opt/29k/src/inc
36
37#
38# Local tailoring (on the command line) can be done by setting XCFLAGS
39# which is never set in the Makefile's
40#
41
42#
43# CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V, CFLAGS_PROFILE_V are the values we
44# would want the corresponding macros to be set to.
45#
46# CFLAGS_OPTIMIZE, CFLAGS_DEBUG, CFLAGS_PROFILE are set in the leaf
47# Makefiles by the 'debug:' and 'profile:' targets to their _V values.
48#
49
50# default flags
51
52CFLAGS_DEFAULT = -NB -bwc -nocrt0 -Ml -m -g -Hansi -Hon=Pointers_compatible -Hon=Pointers_compatible_with_ints -Dinline= -D___AM29K__ -Hnocopyr
53
54# optimize flag: typically -0, could use -O4 or -fast
55# -O4 is ok for RTEMS
56# -Os to optimize for size
57CFLAGS_OPTIMIZE_V=-Os
58
59# debug flag; typically -g
60CFLAGS_DEBUG_V=-g -O0 -DRTEMS_DEBUG -DSTACK_CHECKER_ON
61
62# when debugging, optimize flag: typically empty
63# some compilers do allow optimization with their "-g"
64CFLAGS_DEBUG_OPTIMIZE_V=
65
66# profile flag; use gprof(1)
67CFLAGS_PROFILE_V=
68
69# default is to optimize
70CFLAGS_OPTIMIZE=$(CFLAGS_OPTIMIZE_V)
71
72# dynamic libraries
73CFLAGS_DYNAMIC_V=-fpic
74#ASFLAGS_DYNAMIC_V=
75
76CFLAGS=$(CFLAGS_DEFAULT) $(CFLAGS_OPTIMIZE) $(CFLAGS_DEBUG) $(CFLAGS_PROFILE)
77
78# List of library paths without -L
79LD_PATHS= $(PROJECT_RELEASE)/lib
80
81# libraries you want EVERYONE to link with
82LD_LIBS=
83
84# ld flag to ensure pure-text
85LDFLAGS_MUST_BE_PURE_V =
86
87# ld flag for [un]shared objects
88LDFLAGS_STATIC_LIBRARIES_V =
89LDFLAGS_SHARED_LIBRARIES_V =
90
91# ld flag for incomplete link
92LDFLAGS_INCOMPLETE = -i
93
94# Special linker options when building lib.so
95LDFLAGS_DYNAMIC_V = ??
96
97# Some dynamic linking systems want the preferred name recorded in the binary
98# ref: src/libxil/Makefile
99LDFLAGS_DYNAMIC_LIBNAME_V = -h $(DYNAMIC_VERSION_LIBNAME)
100
101# ld flags for profiling, debugging
102LDFLAGS_PROFILE_V =
103LDFLAGS_DEBUG_V =
104
105LDFLAGS=$(LDFLAGS_PROFILE) $(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %)
106
107#
108# Stuff to clean and clobber for the compiler and its tools
109#
110
111CLEAN_CC = a.out *.o *.BAK
112CLOBBER_CC =
113
114#
115# Client compiler and support tools
116#
117
118CC=/opt/29k/bin/hc29
119CXX=$(CC)
120CCC=$(CXX)
121
122# CPP command to write file to standard output
123CPP=$(CC) -E
124
125# flags set by cc when running cpp
126CPP_CC_FLAGS=-D__STDC__
127
128AS=/opt/29k/bin/as29
129ASPP=ERROR_NO_ASPP
130
131ASFLAGS=-l -fcgimosx
132
133# NOTE: should never use full path .. but there is no guarantee ld, etc
134#       will be in the same directory as gcc.. so hope they are in the path
135#       Don't do this on a real target!!!
136LD=/opt/29k/bin/ld29
137NM=/opt/29k/bin/nm29
138AR=echo making library
139# egrep regexp to ignore symbol table entries in ar archives.
140# Only used to make sure we skip them when coalescing libraries.
141# skip __.SYMDEF and empty names (maybe bug in ranlib??).
142AR_SYMBOL_TABLE="HIGHLY-UNLIKELY-TO-CONFLICT"
143ARFLAGS=ruv
144
145# NOTE: see comment on ld, nm, ar
146SIZE=size
147
148#
149# Command to convert a normal archive to one searchable by $(LD)
150# Not needed on SVR4
151#
152
153MKLIB=/opt/29k/bin/lib29
154
155#
156# How to compile stuff into ${ARCH} subdirectory
157#
158# NOTE: we override COMPILE.c
159#
160
161COMPILE.c=$(CC) -c $(CFLAGS) $(CPPFLAGS) $(XCFLAGS)
162
163${ARCH}/%.o: %.c
164        ${COMPILE.c} -o $@ $<
165        $(CHMOD) -f g+w $@
166
167${ARCH}/%.o: %.cc
168        ${COMPILE.c} -o $@ $<
169        $(CHMOD) -f g+w $@
170
171${ARCH}/%.o: %.s
172        ${COMPILE.c} -DASM -o $@ $<
173        $(CHMOD) -f g+w $@
174
175${ARCH}/%.o: %.S
176        $(CP) $*.s $(ARCH)/$*.c
177        $(CPP) $(CPPFLAGS) $(ARCH)/$*.c  > $(ARCH)/$*.s
178        ${COMPILE.c} -o $@ $(ARCH)/$*.s
179        $(CHMOD) -f g+w $@
180        $(RM) $(ARCH)/$*.c
181
182# Specify our own default rule for this to prevent having CFLAGS and
183#  CPPFLAGS being passed to linker
184${ARCH}/%: ${ARCH}/%.o
185        ${CC} ${LDFLAGS} -o $@ $@.o ${LD_LIBS}
186        $(CHMOD) -f g+w $@
187
188# Make foo.rel from foo.o
189${ARCH}/%.rel: ${ARCH}/%.o
190        ${LD} $(LDFLAGS_INCOMPLETE) -o $@ $^
191        $(CHMOD) -f g+w $@
192
193# create $(ARCH)/pgm from pgm.sh
194${ARCH}/%: %.sh
195        $(RM) $@
196        $(CP) $< $@
197        $(CHMOD) +x $@
198        $(CHMOD) -f g+w $@
199
200# Dependency files for use by gmake
201# NOTE: we don't put in $(TARGET_ARCH)
202#       so that 'make clean' doesn't blow it away
203
204DEPEND=Depends-$(TARGET_ARCH:o-%=%)
205
206CLEAN_DEPEND=$(DEPEND).tmp
207CLOBBER_DEPEND=$(DEPEND)
208
209# We deliberately don't have anything depend on the
210# $(DEPEND) file; otherwise it will get rebuilt even
211# on 'make clean'
212#
213
214depend: $(C_FILES) $(CC_FILES) $(S_FILES)
215ifneq ($(words $(C_FILES) $(CC_FILES) $(S_FILES)), 0)
216#       Use gcc -M to generate dependencies
217#       Replace foo.o with $(ARCH)/foo.o
218#       Replace $(ARCH) value with string $(ARCH)
219#           so that it will for debug and profile cases
220        $(COMPILE.c) -Hmake $^ | \
221            $(SED) -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
222                   -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
223
224        $(MV) $(DEPEND).tmp $(DEPEND)
225        $(CHMOD) -f g+w $(DEPEND)
226endif
227
228
229# spell out all the LINK_FILE's, rather than using -lbsp, so
230#  that $(LINK_FILES) can be a dependency
231
232# Start file must be one of
233#    $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o
234#    $(PROJECT_RELEASE)/lib/asmiface$(LIB_VARIANT).o
235# It defaults to start.o, but an app can override it.
236
237# Note:  Normally RTEMS provides a start file...
238START_FILE= $(PROJECT_RELEASE)/lib/crt0$(LIB_VARIANT).o $(PROJECT_RELEASE)/lib/register$(LIB_VARIANT).o
239
240LIBC_LOW=   $(PROJECT_RELEASE)/lib/libcsupport$(LIBSUFFIX_VA)
241
242LIBGCC = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name $(GCCSED))
243
244LIBOSBOOT=/home/src/amd29k/sps2000/netrom.o
245
246LINK_FILES= \
247    $(START_FILE) \
248    $(OBJS) \
249    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel) \
250    $(PROJECT_RELEASE)/lib/libbsp$(LIBSUFFIX_VA)  \
251    $(LD_LIBS) \
252    $(PROJECT_RELEASE)/lib/libtest$(LIBSUFFIX_VA) \
253    $(PROJECT_RELEASE)/lib/librtems$(LIBSUFFIX_VA) \
254    $(LIBC_LOW) \
255    $(PROJECT_RELEASE)/lib/libmisc$(LIBSUFFIX_VA) \
256    $(LIBC_LIBC) \
257    $(LIBC_EXTRALIBS) \
258    $(LIBC_LIBM)
259#    /home/craigl/osbdbg.o
260
261# Here is the rule to actually build a $(ARCH)/foo.exe
262# It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm
263# Usage ref: src/tests/sptest/sp1/Makefile
264
265define make-exe
266        if [ $(NO_ROM) ]; then echo "\n\nskipping ROM compile\n"; else  \
267          $(CC) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink -u _times -u _gettimeofday \
268          -u _sleep -o $(basename $@).out $(LIBOSBOOT) $(LINK_FILES); \
269          romcoff -r -t -l -b $(basename $@).out raminit.o; \
270          rm $(basename $@).out; \
271          $(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).romcof $(LIBOSBOOT) \
272          $(LINK_FILES) raminit.o -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink > $(basename $@).rommap ; \
273          rm raminit.o ; \
274          $(CHMOD) -f g+w $(basename $@).romcof; \
275          /opt/green/coff2sr -noS5 $(basename $@).romcof -o $(basename $@).srec; \
276          $(CHMOD) -f g+w $(basename $@).srec; \
277        fi
278        if [ $(CREATE_MAP) ]; then \
279          $(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink > $(basename $@).rammap; \
280        else \
281          rm $(basename $@).rommap > /dev/null 2> /dev/null ; \
282          $(CC) -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink; \
283        fi
284        $(CHMOD) -f g+w $(basename $@).exe
285#       $(CC) -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd/opt/29k/lib/link030.cmd
286        $(NM) -g $(basename $@).exe > $(basename $@).num
287        $(CHMOD) -f g+w $(basename $@).num
288#       $(SIZE) $(basename $@).exe
289endef
290
291define make-rel
292        $(LD) $(LDFLAGS_INCOMPLETE) $(XLDFLAGS) -o $@ $(OBJS)
293        $(CHMOD) -f g+w $@
294endef
Note: See TracBrowser for help on using the repository browser.