source: rtems/make/compilers/gcc-portsw.cfg @ 45789f2

4.104.114.84.95
Last change on this file since 45789f2 was 93f79c0f, checked in by Joel Sherrill <joel.sherrill@…>, on May 8, 2001 at 10:59:25 PM

2001-05-07 Ralf Corsepius <corsepiu@…>

  • leaf.cfg: Remove CFLAGS_DEBUG_OPTIMIZE_V.
  • compilers/gcc-no_bsp.cfg: Remove CPP_CC_FLAGS.
  • compilers/gcc-portsw.cfg: Remove CPP_CC_FLAGS.
  • compilers/gcc-target-default.cfg: Remove *_DEBUG_OPTIMIZE_*-flags, remove unused flags, remove -ansi from CPP.
  • custom/eth_comm.cfg: Remove CPU_DEFINES.
  • custom/sim68000.cfg: Remove CPU_DEFINES.
  • Property mode set to 100644
File size: 7.8 KB
Line 
1#
2#  gcc-no_bsp.cfg,v 1.13 1995/12/19 19:59:57 joel Exp
3#
4# This is for the amd29k portsw board.
5#
6# THIS IS NOT A GNU TOOLS BASED PORT!!!
7#
8
9# Prefix on the installed GNU tools
10#  Just use the native tools
11GNU_TOOLS_PREFIX=
12
13# Additional target names (other than debug, profile)
14TARGET_VARIANTS +=
15
16#
17# Pre-processor defines.
18# Local tailoring (on the command line) can be done by setting XCPPFLAGS
19# which is never set in the Makefile's
20#
21# Possible defines include:
22#       -DRTEMS_LIBC            using libc bundled with RTEMS
23#       -DRTEMS_NEWLIB          using CYGNUS libc
24#       -DMALLOC_PROVIDED       must be used for newlib reent struct
25
26DEFINES:= $(LIBC_DEFINES)
27
28GCC_INCLUDE=.
29
30#  Note: normally we do not want the standard include files
31#        Also we usually include a "libc_include" directory
32CPPFLAGS=$(XCPPFLAGS) $(DEFINES) \
33  -I$(RTEMS_LIBC_DIR)/include \
34  -I$(PROJECT_INCLUDE) \
35  -I/opt/29k/src/inc
36
37#
38# Local tailoring (on the command line) can be done by setting XCFLAGS
39# which is never set in the Makefile's
40#
41
42#
43# CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V, CFLAGS_PROFILE_V are the values we
44# would want the corresponding macros to be set to.
45#
46# CFLAGS_OPTIMIZE, CFLAGS_DEBUG, CFLAGS_PROFILE are set in the leaf
47# Makefiles by the 'debug:' and 'profile:' targets to their _V values.
48#
49
50# default flags
51
52#CFLAGS_DEFAULT = -NB -bwc -nocrt0 -Ml -m -g -Hon=Pointers_compatible -Hon=Pointers_compatible_with_ints -Dinline= -D___AM29K__ -Hnocopyr
53CFLAGS_DEFAULT = $(CPU_CFLAGS) -Wall
54
55# optimize flag: typically -0, could use -O4 or -fast
56# -O4 is ok for RTEMS
57# -Os to optimize for size
58CFLAGS_OPTIMIZE_V=-Os
59
60# debug flag; typically -g
61CFLAGS_DEBUG_V=-g -O0 -DRTEMS_DEBUG -DSTACK_CHECKER_ON
62
63# profile flag; use gprof(1)
64CFLAGS_PROFILE_V=
65
66# default is to optimize
67CFLAGS_OPTIMIZE=$(CFLAGS_OPTIMIZE_V)
68
69# dynamic libraries
70CFLAGS_DYNAMIC_V=-fpic
71#ASFLAGS_DYNAMIC_V=
72
73CFLAGS=$(CFLAGS_DEFAULT) $(CFLAGS_OPTIMIZE) $(CFLAGS_DEBUG) $(CFLAGS_PROFILE)
74
75# List of library paths without -L
76LD_PATHS= $(PROJECT_RELEASE)/lib
77
78# libraries you want EVERYONE to link with
79LD_LIBS=
80
81# ld flag to ensure pure-text
82LDFLAGS_MUST_BE_PURE_V =
83
84# ld flag for [un]shared objects
85LDFLAGS_STATIC_LIBRARIES_V =
86LDFLAGS_SHARED_LIBRARIES_V =
87
88# ld flag for incomplete link
89LDFLAGS_INCOMPLETE = -i
90
91# Special linker options when building lib.so
92LDFLAGS_DYNAMIC_V = ??
93
94# Some dynamic linking systems want the preferred name recorded in the binary
95# ref: src/libxil/Makefile
96LDFLAGS_DYNAMIC_LIBNAME_V = -h $(DYNAMIC_VERSION_LIBNAME)
97
98# ld flags for profiling, debugging
99LDFLAGS_PROFILE_V =
100LDFLAGS_DEBUG_V =
101
102LDFLAGS=$(LDFLAGS_PROFILE) $(LDFLAGS_DEBUG) $(LD_PATHS:%=-L %)
103
104#
105# Stuff to clean and clobber for the compiler and its tools
106#
107
108CLEAN_CC = a.out *.o *.BAK
109CLOBBER_CC =
110
111#
112# Client compiler and support tools
113#
114
115CC=/opt/29k/bin/hc29
116CXX=$(CC)
117CCC=$(CXX)
118
119# CPP command to write file to standard output
120CPP=$(CC) -E
121
122AS=/opt/29k/bin/as29
123ASPP=ERROR_NO_ASPP
124
125ASFLAGS=-l -fcgimosx
126
127# NOTE: should never use full path .. but there is no guarantee ld, etc
128#       will be in the same directory as gcc.. so hope they are in the path
129#       Don't do this on a real target!!!
130LD=/opt/29k/bin/ld29
131NM=/opt/29k/bin/nm29
132AR=echo making library
133# egrep regexp to ignore symbol table entries in ar archives.
134# Only used to make sure we skip them when coalescing libraries.
135# skip __.SYMDEF and empty names (maybe bug in ranlib??).
136AR_SYMBOL_TABLE="HIGHLY-UNLIKELY-TO-CONFLICT"
137ARFLAGS=ruv
138
139# NOTE: see comment on ld, nm, ar
140SIZE=size
141
142#
143# Command to convert a normal archive to one searchable by $(LD)
144# Not needed on SVR4
145#
146
147MKLIB=/opt/29k/bin/lib29
148
149#
150# How to compile stuff into ${ARCH} subdirectory
151#
152# NOTE: we override COMPILE.c
153#
154
155COMPILE.c=$(CC) -c $(CFLAGS) $(CPPFLAGS) $(XCFLAGS)
156
157${ARCH}/%.o: %.c
158        ${COMPILE.c} -o $@ $<
159        $(CHMOD) -f g+w $@
160
161${ARCH}/%.o: %.cc
162        ${COMPILE.c} -o $@ $<
163        $(CHMOD) -f g+w $@
164
165${ARCH}/%.o: %.s
166        ${COMPILE.c} -DASM -o $@ $<
167        $(CHMOD) -f g+w $@
168
169${ARCH}/%.o: %.S
170        $(CP) $*.s $(ARCH)/$*.c
171        $(CPP) $(CPPFLAGS) $(ARCH)/$*.c  > $(ARCH)/$*.s
172        ${COMPILE.c} -o $@ $(ARCH)/$*.s
173        $(CHMOD) -f g+w $@
174        $(RM) $(ARCH)/$*.c
175
176# Specify our own default rule for this to prevent having CFLAGS and
177#  CPPFLAGS being passed to linker
178${ARCH}/%: ${ARCH}/%.o
179        ${CC} ${LDFLAGS} -o $@ $@.o ${LD_LIBS}
180        $(CHMOD) -f g+w $@
181
182# Make foo.rel from foo.o
183${ARCH}/%.rel: ${ARCH}/%.o
184        ${LD} $(LDFLAGS_INCOMPLETE) -o $@ $^
185        $(CHMOD) -f g+w $@
186
187# create $(ARCH)/pgm from pgm.sh
188${ARCH}/%: %.sh
189        $(RM) $@
190        $(CP) $< $@
191        $(CHMOD) +x $@
192        $(CHMOD) -f g+w $@
193
194# Dependency files for use by gmake
195# NOTE: we don't put them into $(ARCH)
196#       so that 'make clean' doesn't blow it away
197
198DEPEND=Depends-${ARCH}
199
200CLEAN_DEPEND=$(DEPEND).tmp
201CLOBBER_DEPEND=$(DEPEND)
202
203# We deliberately don't have anything depend on the
204# $(DEPEND) file; otherwise it will get rebuilt even
205# on 'make clean'
206#
207
208depend: $(C_FILES) $(CC_FILES) $(S_FILES)
209ifneq ($(words $(C_FILES) $(CC_FILES) $(S_FILES)), 0)
210#       Use gcc -M to generate dependencies
211#       Replace foo.o with $(ARCH)/foo.o
212#       Replace $(ARCH) value with string $(ARCH)
213#           so that it will for debug and profile cases
214        $(COMPILE.c) -Hmake $^ | \
215            $(SED) -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
216                   -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
217
218        $(MV) $(DEPEND).tmp $(DEPEND)
219        $(CHMOD) -f g+w $(DEPEND)
220endif
221
222
223# spell out all the LINK_FILE's, rather than using -lbsp, so
224#  that $(LINK_FILES) can be a dependency
225
226# Start file must be one of
227#    $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o
228#    $(PROJECT_RELEASE)/lib/asmiface$(LIB_VARIANT).o
229# It defaults to start.o, but an app can override it.
230
231# Note:  Normally RTEMS provides a start file...
232START_FILE= $(PROJECT_RELEASE)/lib/crt0$(LIB_VARIANT).o $(PROJECT_RELEASE)/lib/register$(LIB_VARIANT).o
233
234LIBC_LOW=   $(PROJECT_RELEASE)/lib/libcsupport$(LIBSUFFIX_VA)
235
236LIBGCC = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name $(GCCSED))
237
238LIBOSBOOT=/home/src/amd29k/sps2000/netrom.o
239
240LINK_FILES= \
241    $(START_FILE) \
242    $(OBJS) \
243    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel) \
244    $(PROJECT_RELEASE)/lib/libbsp$(LIBSUFFIX_VA)  \
245    $(LD_LIBS) \
246    $(PROJECT_RELEASE)/lib/libtest$(LIBSUFFIX_VA) \
247    $(PROJECT_RELEASE)/lib/librtems$(LIBSUFFIX_VA) \
248    $(LIBC_LOW) \
249    $(PROJECT_RELEASE)/lib/libmisc$(LIBSUFFIX_VA) \
250    $(LIBC_LIBC) \
251    $(LIBC_EXTRALIBS) \
252    $(LIBC_LIBM)
253#    /home/craigl/osbdbg.o
254
255# Here is the rule to actually build a $(ARCH)/foo.exe
256# It also builds $(ARCH)/foo.sr and $(ARCH)/foo.nm
257# Usage ref: src/tests/sptest/sp1/Makefile
258
259define make-exe
260        if [ $(NO_ROM) ]; then echo "\n\nskipping ROM compile\n"; else  \
261          $(CC) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink -u _times -u _gettimeofday \
262          -u _sleep -o $(basename $@).out $(LIBOSBOOT) $(LINK_FILES); \
263          romcoff -r -t -l -b $(basename $@).out raminit.o; \
264          rm $(basename $@).out; \
265          $(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).romcof $(LIBOSBOOT) \
266          $(LINK_FILES) raminit.o -nocrt0 -cmd$(PROJECT_RELEASE)/lib/romlink > $(basename $@).rommap ; \
267          rm raminit.o ; \
268          $(CHMOD) -f g+w $(basename $@).romcof; \
269          /opt/green/coff2sr -noS5 $(basename $@).romcof -o $(basename $@).srec; \
270          $(CHMOD) -f g+w $(basename $@).srec; \
271        fi
272        if [ $(CREATE_MAP) ]; then \
273          $(CC) -m -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink > $(basename $@).rammap; \
274        else \
275          rm $(basename $@).rommap > /dev/null 2> /dev/null ; \
276          $(CC) -u _times -u _gettimeofday -u _sleep -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd$(PROJECT_RELEASE)/lib/ramlink; \
277        fi
278        $(CHMOD) -f g+w $(basename $@).exe
279#       $(CC) -o $(basename $@).exe $(LINK_FILES) -nocrt0 -cmd/opt/29k/lib/link030.cmd
280        $(NM) -g $(basename $@).exe > $(basename $@).num
281        $(CHMOD) -f g+w $(basename $@).num
282#       $(SIZE) $(basename $@).exe
283endef
284
285define make-rel
286        $(LD) $(LDFLAGS_INCOMPLETE) $(XLDFLAGS) -o $@ $(OBJS)
287        $(CHMOD) -f g+w $@
288endef
Note: See TracBrowser for help on using the repository browser.