source: rtems/cpukit/score/cpu/sh/rtems/score/sh.h @ c499856

4.115
Last change on this file since c499856 was c499856, checked in by Chris Johns <chrisj@…>, on 03/20/14 at 21:10:47

Change all references of rtems.com to rtems.org.

  • Property mode set to 100644
File size: 7.2 KB
Line 
1/**
2 * @file
3 *
4 * @brief Hitachi SH CPU Department Source
5 *
6 * This include file contains information pertaining to the Hitachi SH
7 * processor.
8 */
9
10/*
11 *  Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and
12 *           Bernd Becker (becker@faw.uni-ulm.de)
13 *
14 *  COPYRIGHT (c) 1997-1998, FAW Ulm, Germany
15 *
16 *  This program is distributed in the hope that it will be useful,
17 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE
19 *
20 *
21 *  COPYRIGHT (c) 1998-2001.
22 *  On-Line Applications Research Corporation (OAR).
23 *
24 *  The license and distribution terms for this file may be
25 *  found in the file LICENSE in this distribution or at
26 *  http://www.rtems.org/license/LICENSE.
27 */
28
29#ifndef _RTEMS_SCORE_SH_H
30#define _RTEMS_SCORE_SH_H
31
32#ifdef __cplusplus
33extern "C" {
34#endif
35
36/*
37 *  This file contains the information required to build
38 *  RTEMS for a particular member of the "SH" family.
39 *
40 *  It does  this by setting variables to indicate which implementation
41 *  dependent features are present in a particular member of the family.
42 */
43
44/*
45 *  Figure out all CPU Model Feature Flags based upon compiler
46 *  predefines.
47 */
48
49#if defined(__SH2E__) || defined(__SH3E__)
50
51/* FIXME: SH-DSP context not currently supported */
52#define SH_HAS_FPU 0
53
54#elif defined(__SH4__) || defined(__SH4_SINGLE_ONLY__)
55
56/*
57 * Define this if you want to use XD-registers.
58 * Then this registers will be saved/restored on context switch.
59 * ! They will not be saved/restored on interrupts!
60 */
61#define SH4_USE_X_REGISTERS     0
62
63#if defined(__LITTLE_ENDIAN__)
64#define SH_HAS_FPU 1
65#else
66/* FIXME: Context_Control_fp does not support big endian */
67#warning FPU not supported
68#define SH_HAS_FPU 0
69#endif
70
71#elif defined(__sh1__) || defined(__sh2__) || defined(__sh3__)
72#define SH_HAS_FPU 0
73#else
74#warning Cannot detect FPU support, assuming no FPU
75#define SH_HAS_FPU 0
76#endif
77
78/* this should not be here */
79#ifndef CPU_MODEL_NAME
80#define CPU_MODEL_NAME  "SH-Multilib"
81#endif
82
83/*
84 * If the following macro is set to 0 there will be no software irq stack
85 */
86
87#ifndef SH_HAS_SEPARATE_STACKS
88#define SH_HAS_SEPARATE_STACKS 1
89#endif
90
91/*
92 *  Define the name of the CPU family.
93 */
94
95#define CPU_NAME "Hitachi SH"
96
97#ifndef ASM
98
99#if defined(__sh1__) || defined(__sh2__)
100
101/*
102 * Mask for disabling interrupts
103 */
104#define SH_IRQDIS_VALUE 0xf0
105
106#define sh_disable_interrupts( _level ) \
107  __asm__ volatile ( \
108    "stc sr,%0\n\t" \
109    "ldc %1,sr\n\t"\
110  : "=&r" (_level ) \
111  : "r" (SH_IRQDIS_VALUE) );
112
113#define sh_enable_interrupts( _level ) \
114  __asm__ volatile( "ldc %0,sr\n\t" \
115    "nop\n\t" \
116    :: "r" (_level) );
117
118/*
119 *  This temporarily restores the interrupt to _level before immediately
120 *  disabling them again.  This is used to divide long RTEMS critical
121 *  sections into two or more parts.  The parameter _level is not
122 *  modified.
123 */
124
125#define sh_flash_interrupts( _level ) \
126  __asm__ volatile( \
127    "ldc %1,sr\n\t" \
128    "nop\n\t" \
129    "ldc %0,sr\n\t" \
130    "nop\n\t" \
131    : : "r" (SH_IRQDIS_VALUE), "r" (_level) );
132
133#else
134
135#define SH_IRQDIS_MASK 0xf0
136
137#define sh_disable_interrupts( _level ) \
138  __asm__ volatile ( \
139    "stc sr,%0\n\t" \
140    "mov %0,r5\n\t" \
141    "or %1,r5\n\t" \
142    "ldc r5,sr\n\t"\
143  : "=&r" (_level ) \
144  : "r" (SH_IRQDIS_MASK) \
145  : "r5" );
146
147#define sh_enable_interrupts( _level ) \
148  __asm__ volatile( "ldc %0,sr\n\t" \
149    "nop\n\t" \
150    :: "r" (_level) );
151
152/*
153 *  This temporarily restores the interrupt to _level before immediately
154 *  disabling them again.  This is used to divide long RTEMS critical
155 *  sections into two or more parts.  The parameter _level is not
156 *  modified.
157 */
158
159#define sh_flash_interrupts( _level ) \
160  __asm__ volatile( \
161    "stc sr,r5\n\t" \
162    "ldc %1,sr\n\t" \
163    "nop\n\t" \
164    "or %0,r5\n\t" \
165    "ldc r5,sr\n\t" \
166    "nop\n\t" \
167    : : "r" (SH_IRQDIS_MASK), "r" (_level) : "r5");
168
169#endif
170
171#define sh_get_interrupt_level( _level ) \
172{ \
173  register uint32_t   _tmpsr ; \
174  \
175  __asm__ volatile( "stc sr, %0" : "=r" (_tmpsr) ); \
176  _level = (_tmpsr & 0xf0) >> 4 ; \
177}
178
179#define sh_set_interrupt_level( _newlevel ) \
180{ \
181  register uint32_t   _tmpsr; \
182  \
183  __asm__ volatile ( "stc sr, %0" : "=r" (_tmpsr) ); \
184  _tmpsr = ( _tmpsr & ~0xf0 ) | ((_newlevel) << 4) ; \
185  __asm__  volatile( "ldc %0,sr" :: "r" (_tmpsr) ); \
186}
187
188/*
189 *  The following routine swaps the endian format of an unsigned int.
190 *  It must be static because it is referenced indirectly.
191 */
192
193static inline uint32_t sh_swap_u32(
194  uint32_t value
195)
196{
197  register uint32_t swapped;
198
199  __asm__ volatile (
200    "swap.b %1,%0; "
201    "swap.w %0,%0; "
202    "swap.b %0,%0"
203    : "=r" (swapped)
204    : "r"  (value) );
205
206  return( swapped );
207}
208
209static inline uint16_t sh_swap_u16(
210  uint16_t value
211)
212{
213  register uint16_t swapped ;
214
215  __asm__ volatile ( "swap.b %1,%0" : "=r" (swapped) : "r"  (value) );
216
217  return( swapped );
218}
219
220#define CPU_swap_u32( value ) sh_swap_u32( value )
221#define CPU_swap_u16( value ) sh_swap_u16( value )
222
223extern unsigned int sh_set_irq_priority(
224  unsigned int irq,
225  unsigned int prio );
226
227#endif /* !ASM */
228
229/*
230 * Bits on SH-4 registers.
231 * See SH-4 Programming manual for more details.
232 *
233 * Added by Alexandra Kossovsky <sasha@oktet.ru>
234 */
235
236#if defined(__SH4__)
237#define SH4_SR_MD          0x40000000 /* Priveleged mode */
238#define SH4_SR_RB          0x20000000 /* General register bank specifier */
239#define SH4_SR_BL          0x10000000 /* Exeption/interrupt masking bit */
240#define SH4_SR_FD          0x00008000 /* FPU disable bit */
241#define SH4_SR_M           0x00000200 /* For signed division:
242                                         divisor (module) is negative */
243#define SH4_SR_Q           0x00000100 /* For signed division:
244                                         dividend (and quotient) is negative */
245#define SH4_SR_IMASK       0x000000f0 /* Interrupt mask level */
246#define SH4_SR_IMASK_S     4
247#define SH4_SR_S           0x00000002 /* Saturation for MAC instruction:
248                                         if set, data in MACH/L register
249                                         is restricted to 48/32 bits
250                                         for MAC.W/L instructions */
251#define SH4_SR_T           0x00000001 /* 1 if last condiyion was true */
252#define SH4_SR_RESERV      0x8fff7d0d /* Reserved bits, read/write as 0 */
253
254/* FPSCR -- FPU Status/Control Register */
255#define SH4_FPSCR_FR       0x00200000 /* FPU register bank specifier */
256#define SH4_FPSCR_SZ       0x00100000 /* FMOV 64-bit transfer mode */
257#define SH4_FPSCR_PR       0x00080000 /* Double-percision floating-point
258                                         operations flag */
259                                      /* SH4_FPSCR_SZ & SH4_FPSCR_PR != 1 */
260#define SH4_FPSCR_DN       0x00040000 /* Treat denormalized number as zero */
261#define SH4_FPSCR_CAUSE    0x0003f000 /* FPU exeption cause field */
262#define SH4_FPSCR_CAUSE_S  12
263#define SH4_FPSCR_ENABLE   0x00000f80 /* FPU exeption enable field */
264#define SH4_FPSCR_ENABLE_s 7
265#define SH4_FPSCR_FLAG     0x0000007d /* FPU exeption flag field */
266#define SH4_FPSCR_FLAG_S   2
267#define SH4_FPSCR_RM       0x00000001 /* Rounding mode:
268                                         1/0 -- round to zero/nearest */
269#define SH4_FPSCR_RESERV   0xffd00000 /* Reserved bits, read/write as 0 */
270
271#endif
272
273#ifdef __cplusplus
274}
275#endif
276
277#endif
Note: See TracBrowser for help on using the repository browser.