[7908ba5b] | 1 | /* sh.h |
---|
| 2 | * |
---|
| 3 | * This include file contains information pertaining to the Hitachi SH |
---|
| 4 | * processor. |
---|
| 5 | * |
---|
| 6 | * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and |
---|
| 7 | * Bernd Becker (becker@faw.uni-ulm.de) |
---|
| 8 | * |
---|
| 9 | * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany |
---|
| 10 | * |
---|
| 11 | * This program is distributed in the hope that it will be useful, |
---|
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE |
---|
| 14 | * |
---|
| 15 | * |
---|
[7d953c2] | 16 | * COPYRIGHT (c) 1998-2001. |
---|
[7908ba5b] | 17 | * On-Line Applications Research Corporation (OAR). |
---|
| 18 | * |
---|
| 19 | * The license and distribution terms for this file may be |
---|
| 20 | * found in the file LICENSE in this distribution or at |
---|
[7f28803d] | 21 | * http://www.rtems.com/license/LICENSE. |
---|
[7908ba5b] | 22 | * |
---|
| 23 | * $Id$ |
---|
| 24 | */ |
---|
| 25 | |
---|
| 26 | #ifndef _sh_h |
---|
| 27 | #define _sh_h |
---|
| 28 | |
---|
| 29 | #ifdef __cplusplus |
---|
| 30 | extern "C" { |
---|
| 31 | #endif |
---|
| 32 | |
---|
| 33 | /* |
---|
| 34 | * This file contains the information required to build |
---|
| 35 | * RTEMS for a particular member of the "SH" family. |
---|
| 36 | * |
---|
| 37 | * It does this by setting variables to indicate which implementation |
---|
| 38 | * dependent features are present in a particular member of the family. |
---|
| 39 | */ |
---|
[ac815430] | 40 | |
---|
[df49c60] | 41 | /* |
---|
| 42 | * Figure out all CPU Model Feature Flags based upon compiler |
---|
| 43 | * predefines. |
---|
| 44 | */ |
---|
| 45 | |
---|
[bc5fc7a6] | 46 | #if defined(__SH3E__) || defined(__SH4__) || defined(__SH4_SINGLE_ONLY__) |
---|
| 47 | |
---|
| 48 | /* |
---|
| 49 | * Define this if you want to use XD-registers. |
---|
| 50 | * Then this registers will be saved/restored on context switch. |
---|
| 51 | * ! They will not be saved/restored on interrupts! |
---|
| 52 | */ |
---|
| 53 | #define SH4_USE_X_REGISTERS 0 |
---|
[df49c60] | 54 | |
---|
[bc5fc7a6] | 55 | #if defined(__LITTLE_ENDIAN__) |
---|
| 56 | #define SH_HAS_FPU 1 |
---|
[ac815430] | 57 | #else |
---|
[bc5fc7a6] | 58 | /* FIXME: Context_Control_fp does not support big endian */ |
---|
| 59 | #warning FPU not supported |
---|
| 60 | #define SH_HAS_FPU 0 |
---|
| 61 | #endif |
---|
[7908ba5b] | 62 | |
---|
[bc5fc7a6] | 63 | #elif defined(__sh1__) || defined(__sh2__) || defined(__sh3__) |
---|
| 64 | #define SH_HAS_FPU 0 |
---|
[97c465c] | 65 | #else |
---|
[bc5fc7a6] | 66 | #warning Cannot detect FPU support, assuming no FPU |
---|
| 67 | #define SH_HAS_FPU 0 |
---|
[97c465c] | 68 | #endif |
---|
| 69 | |
---|
[ac815430] | 70 | /* this should not be here */ |
---|
[bc5fc7a6] | 71 | #ifndef CPU_MODEL_NAME |
---|
[ac815430] | 72 | #define CPU_MODEL_NAME "SH-Multilib" |
---|
[bc5fc7a6] | 73 | #endif |
---|
[ac815430] | 74 | |
---|
[7908ba5b] | 75 | /* |
---|
| 76 | * If the following macro is set to 0 there will be no software irq stack |
---|
| 77 | */ |
---|
| 78 | |
---|
[97c465c] | 79 | #ifndef SH_HAS_SEPARATE_STACKS |
---|
| 80 | #define SH_HAS_SEPARATE_STACKS 1 |
---|
[7908ba5b] | 81 | #endif |
---|
| 82 | |
---|
| 83 | /* |
---|
| 84 | * Define the name of the CPU family. |
---|
| 85 | */ |
---|
| 86 | |
---|
| 87 | #define CPU_NAME "Hitachi SH" |
---|
| 88 | |
---|
| 89 | #ifndef ASM |
---|
| 90 | |
---|
[bc5fc7a6] | 91 | #if defined(__sh1__) || defined(__sh2__) |
---|
| 92 | |
---|
[7908ba5b] | 93 | /* |
---|
| 94 | * Mask for disabling interrupts |
---|
| 95 | */ |
---|
| 96 | #define SH_IRQDIS_VALUE 0xf0 |
---|
| 97 | |
---|
| 98 | #define sh_disable_interrupts( _level ) \ |
---|
| 99 | asm volatile ( \ |
---|
| 100 | "stc sr,%0\n\t" \ |
---|
| 101 | "ldc %1,sr\n\t"\ |
---|
[75f2b0b] | 102 | : "=&r" (_level ) \ |
---|
[7908ba5b] | 103 | : "r" (SH_IRQDIS_VALUE) ); |
---|
| 104 | |
---|
| 105 | #define sh_enable_interrupts( _level ) \ |
---|
| 106 | asm volatile( "ldc %0,sr\n\t" \ |
---|
| 107 | "nop\n\t" \ |
---|
| 108 | :: "r" (_level) ); |
---|
| 109 | |
---|
| 110 | /* |
---|
| 111 | * This temporarily restores the interrupt to _level before immediately |
---|
| 112 | * disabling them again. This is used to divide long RTEMS critical |
---|
| 113 | * sections into two or more parts. The parameter _level is not |
---|
| 114 | * modified. |
---|
| 115 | */ |
---|
| 116 | |
---|
| 117 | #define sh_flash_interrupts( _level ) \ |
---|
| 118 | asm volatile( \ |
---|
| 119 | "ldc %1,sr\n\t" \ |
---|
| 120 | "nop\n\t" \ |
---|
| 121 | "ldc %0,sr\n\t" \ |
---|
| 122 | "nop\n\t" \ |
---|
| 123 | : : "r" (SH_IRQDIS_VALUE), "r" (_level) ); |
---|
| 124 | |
---|
[bc5fc7a6] | 125 | #else |
---|
| 126 | |
---|
| 127 | #define SH_IRQDIS_MASK 0xf0 |
---|
| 128 | |
---|
| 129 | #define sh_disable_interrupts( _level ) \ |
---|
| 130 | asm volatile ( \ |
---|
| 131 | "stc sr,%0\n\t" \ |
---|
| 132 | "mov %0,r5\n\t" \ |
---|
| 133 | "or %1,r5\n\t" \ |
---|
| 134 | "ldc r5,sr\n\t"\ |
---|
| 135 | : "=&r" (_level ) \ |
---|
| 136 | : "r" (SH_IRQDIS_MASK) \ |
---|
| 137 | : "r5" ); |
---|
| 138 | |
---|
| 139 | #define sh_enable_interrupts( _level ) \ |
---|
| 140 | asm volatile( "ldc %0,sr\n\t" \ |
---|
| 141 | "nop\n\t" \ |
---|
| 142 | :: "r" (_level) ); |
---|
| 143 | |
---|
| 144 | /* |
---|
| 145 | * This temporarily restores the interrupt to _level before immediately |
---|
| 146 | * disabling them again. This is used to divide long RTEMS critical |
---|
| 147 | * sections into two or more parts. The parameter _level is not |
---|
| 148 | * modified. |
---|
| 149 | */ |
---|
| 150 | |
---|
| 151 | #define sh_flash_interrupts( _level ) \ |
---|
| 152 | asm volatile( \ |
---|
| 153 | "stc sr,r5\n\t" \ |
---|
| 154 | "ldc %1,sr\n\t" \ |
---|
| 155 | "nop\n\t" \ |
---|
| 156 | "or %0,r5\n\t" \ |
---|
| 157 | "ldc r5,sr\n\t" \ |
---|
| 158 | "nop\n\t" \ |
---|
| 159 | : : "r" (SH_IRQDIS_MASK), "r" (_level) : "r5"); |
---|
| 160 | |
---|
| 161 | #endif |
---|
| 162 | |
---|
[7908ba5b] | 163 | #define sh_get_interrupt_level( _level ) \ |
---|
| 164 | { \ |
---|
| 165 | register unsigned32 _tmpsr ; \ |
---|
| 166 | \ |
---|
| 167 | asm volatile( "stc sr, %0" : "=r" (_tmpsr) ); \ |
---|
| 168 | _level = (_tmpsr & 0xf0) >> 4 ; \ |
---|
| 169 | } |
---|
| 170 | |
---|
| 171 | #define sh_set_interrupt_level( _newlevel ) \ |
---|
| 172 | { \ |
---|
| 173 | register unsigned32 _tmpsr; \ |
---|
| 174 | \ |
---|
| 175 | asm volatile ( "stc sr, %0" : "=r" (_tmpsr) ); \ |
---|
| 176 | _tmpsr = ( _tmpsr & ~0xf0 ) | ((_newlevel) << 4) ; \ |
---|
| 177 | asm volatile( "ldc %0,sr" :: "r" (_tmpsr) ); \ |
---|
| 178 | } |
---|
| 179 | |
---|
| 180 | /* |
---|
| 181 | * The following routine swaps the endian format of an unsigned int. |
---|
| 182 | * It must be static because it is referenced indirectly. |
---|
| 183 | */ |
---|
| 184 | |
---|
| 185 | static inline unsigned int sh_swap_u32( |
---|
| 186 | unsigned int value |
---|
| 187 | ) |
---|
| 188 | { |
---|
| 189 | register unsigned int swapped; |
---|
| 190 | |
---|
| 191 | asm volatile ( |
---|
| 192 | "swap.b %1,%0; " |
---|
| 193 | "swap.w %0,%0; " |
---|
| 194 | "swap.b %0,%0" |
---|
| 195 | : "=r" (swapped) |
---|
| 196 | : "r" (value) ); |
---|
| 197 | |
---|
| 198 | return( swapped ); |
---|
| 199 | } |
---|
| 200 | |
---|
| 201 | static inline unsigned int sh_swap_u16( |
---|
| 202 | unsigned int value |
---|
| 203 | ) |
---|
| 204 | { |
---|
| 205 | register unsigned int swapped ; |
---|
| 206 | |
---|
| 207 | asm volatile ( "swap.b %1,%0" : "=r" (swapped) : "r" (value) ); |
---|
| 208 | |
---|
| 209 | return( swapped ); |
---|
| 210 | } |
---|
| 211 | |
---|
| 212 | #define CPU_swap_u32( value ) sh_swap_u32( value ) |
---|
| 213 | #define CPU_swap_u16( value ) sh_swap_u16( value ) |
---|
| 214 | |
---|
| 215 | extern unsigned int sh_set_irq_priority( |
---|
| 216 | unsigned int irq, |
---|
| 217 | unsigned int prio ); |
---|
| 218 | |
---|
| 219 | #endif /* !ASM */ |
---|
| 220 | |
---|
[7d953c2] | 221 | /* |
---|
| 222 | * Bits on SH-4 registers. |
---|
| 223 | * See SH-4 Programming manual for more details. |
---|
| 224 | * |
---|
| 225 | * Added by Alexandra Kossovsky <sasha@oktet.ru> |
---|
| 226 | */ |
---|
| 227 | |
---|
| 228 | #if defined(__SH4__) |
---|
| 229 | #define SH4_SR_MD 0x40000000 /* Priveleged mode */ |
---|
| 230 | #define SH4_SR_RB 0x20000000 /* General register bank specifier */ |
---|
| 231 | #define SH4_SR_BL 0x10000000 /* Exeption/interrupt masking bit */ |
---|
| 232 | #define SH4_SR_FD 0x00008000 /* FPU disable bit */ |
---|
| 233 | #define SH4_SR_M 0x00000200 /* For signed division: |
---|
| 234 | divisor (module) is negative */ |
---|
| 235 | #define SH4_SR_Q 0x00000100 /* For signed division: |
---|
| 236 | dividend (and quotient) is negative */ |
---|
| 237 | #define SH4_SR_IMASK 0x000000f0 /* Interrupt mask level */ |
---|
| 238 | #define SH4_SR_IMASK_S 4 |
---|
| 239 | #define SH4_SR_S 0x00000002 /* Saturation for MAC instruction: |
---|
| 240 | if set, data in MACH/L register |
---|
| 241 | is restricted to 48/32 bits |
---|
| 242 | for MAC.W/L instructions */ |
---|
| 243 | #define SH4_SR_T 0x00000001 /* 1 if last condiyion was true */ |
---|
| 244 | #define SH4_SR_RESERV 0x8fff7d0d /* Reserved bits, read/write as 0 */ |
---|
| 245 | |
---|
[2bc49cf7] | 246 | /* FPSCR -- FPU Status/Control Register */ |
---|
[7d953c2] | 247 | #define SH4_FPSCR_FR 0x00200000 /* FPU register bank specifier */ |
---|
| 248 | #define SH4_FPSCR_SZ 0x00100000 /* FMOV 64-bit transfer mode */ |
---|
| 249 | #define SH4_FPSCR_PR 0x00080000 /* Double-percision floating-point |
---|
| 250 | operations flag */ |
---|
| 251 | /* SH4_FPSCR_SZ & SH4_FPSCR_PR != 1 */ |
---|
| 252 | #define SH4_FPSCR_DN 0x00040000 /* Treat denormalized number as zero */ |
---|
| 253 | #define SH4_FPSCR_CAUSE 0x0003f000 /* FPU exeption cause field */ |
---|
| 254 | #define SH4_FPSCR_CAUSE_S 12 |
---|
| 255 | #define SH4_FPSCR_ENABLE 0x00000f80 /* FPU exeption enable field */ |
---|
| 256 | #define SH4_FPSCR_ENABLE_s 7 |
---|
| 257 | #define SH4_FPSCR_FLAG 0x0000007d /* FPU exeption flag field */ |
---|
| 258 | #define SH4_FPSCR_FLAG_S 2 |
---|
| 259 | #define SH4_FPSCR_RM 0x00000001 /* Rounding mode: |
---|
| 260 | 1/0 -- round to zero/nearest */ |
---|
| 261 | #define SH4_FPSCR_RESERV 0xffd00000 /* Reserved bits, read/write as 0 */ |
---|
| 262 | |
---|
| 263 | #endif |
---|
| 264 | |
---|
[7908ba5b] | 265 | #ifdef __cplusplus |
---|
| 266 | } |
---|
| 267 | #endif |
---|
| 268 | |
---|
| 269 | #endif |
---|