1 | /** |
---|
2 | * @file |
---|
3 | * |
---|
4 | * @brief M32C CPU Dependent Source |
---|
5 | */ |
---|
6 | |
---|
7 | /* |
---|
8 | * This include file contains information pertaining to the XXX |
---|
9 | * processor. |
---|
10 | * |
---|
11 | * @note This file is part of a porting template that is intended |
---|
12 | * to be used as the starting point when porting RTEMS to a new |
---|
13 | * CPU family. The following needs to be done when using this as |
---|
14 | * the starting point for a new port: |
---|
15 | * |
---|
16 | * + Anywhere there is an XXX, it should be replaced |
---|
17 | * with information about the CPU family being ported to. |
---|
18 | * |
---|
19 | * + At the end of each comment section, there is a heading which |
---|
20 | * says "Port Specific Information:". When porting to RTEMS, |
---|
21 | * add CPU family specific information in this section |
---|
22 | */ |
---|
23 | |
---|
24 | /* |
---|
25 | * COPYRIGHT (c) 1989-2008. |
---|
26 | * On-Line Applications Research Corporation (OAR). |
---|
27 | * |
---|
28 | * The license and distribution terms for this file may be |
---|
29 | * found in the file LICENSE in this distribution or at |
---|
30 | * http://www.rtems.org/license/LICENSE. |
---|
31 | */ |
---|
32 | |
---|
33 | #ifndef _RTEMS_SCORE_CPU_H |
---|
34 | #define _RTEMS_SCORE_CPU_H |
---|
35 | |
---|
36 | #ifdef __cplusplus |
---|
37 | extern "C" { |
---|
38 | #endif |
---|
39 | |
---|
40 | #include <rtems/score/basedefs.h> |
---|
41 | #include <rtems/score/m32c.h> |
---|
42 | |
---|
43 | /* conditional compilation parameters */ |
---|
44 | |
---|
45 | #define RTEMS_USE_16_BIT_OBJECT |
---|
46 | |
---|
47 | /** |
---|
48 | * Does the CPU follow the simple vectored interrupt model? |
---|
49 | * |
---|
50 | * If TRUE, then RTEMS allocates the vector table it internally manages. |
---|
51 | * If FALSE, then the BSP is assumed to allocate and manage the vector |
---|
52 | * table |
---|
53 | * |
---|
54 | * Port Specific Information: |
---|
55 | * |
---|
56 | * XXX document implementation including references if appropriate |
---|
57 | */ |
---|
58 | #define CPU_SIMPLE_VECTORED_INTERRUPTS TRUE |
---|
59 | |
---|
60 | /** |
---|
61 | * Does the RTEMS invoke the user's ISR with the vector number and |
---|
62 | * a pointer to the saved interrupt frame (1) or just the vector |
---|
63 | * number (0)? |
---|
64 | * |
---|
65 | * Port Specific Information: |
---|
66 | * |
---|
67 | * XXX document implementation including references if appropriate |
---|
68 | */ |
---|
69 | #define CPU_ISR_PASSES_FRAME_POINTER FALSE |
---|
70 | |
---|
71 | /** |
---|
72 | * @def CPU_HARDWARE_FP |
---|
73 | * |
---|
74 | * Does the CPU have hardware floating point? |
---|
75 | * |
---|
76 | * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. |
---|
77 | * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. |
---|
78 | * |
---|
79 | * If there is a FP coprocessor such as the i387 or mc68881, then |
---|
80 | * the answer is TRUE. |
---|
81 | * |
---|
82 | * The macro name "M32C_HAS_FPU" should be made CPU specific. |
---|
83 | * It indicates whether or not this CPU model has FP support. For |
---|
84 | * example, it would be possible to have an i386_nofp CPU model |
---|
85 | * which set this to false to indicate that you have an i386 without |
---|
86 | * an i387 and wish to leave floating point support out of RTEMS. |
---|
87 | */ |
---|
88 | |
---|
89 | /** |
---|
90 | * @def CPU_SOFTWARE_FP |
---|
91 | * |
---|
92 | * Does the CPU have no hardware floating point and GCC provides a |
---|
93 | * software floating point implementation which must be context |
---|
94 | * switched? |
---|
95 | * |
---|
96 | * This feature conditional is used to indicate whether or not there |
---|
97 | * is software implemented floating point that must be context |
---|
98 | * switched. The determination of whether or not this applies |
---|
99 | * is very tool specific and the state saved/restored is also |
---|
100 | * compiler specific. |
---|
101 | * |
---|
102 | * Port Specific Information: |
---|
103 | * |
---|
104 | * XXX document implementation including references if appropriate |
---|
105 | */ |
---|
106 | #if ( M32C_HAS_FPU == 1 ) |
---|
107 | #define CPU_HARDWARE_FP TRUE |
---|
108 | #else |
---|
109 | #define CPU_HARDWARE_FP FALSE |
---|
110 | #endif |
---|
111 | #define CPU_SOFTWARE_FP FALSE |
---|
112 | |
---|
113 | #define CPU_CONTEXT_FP_SIZE 0 |
---|
114 | |
---|
115 | /** |
---|
116 | * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? |
---|
117 | * |
---|
118 | * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. |
---|
119 | * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. |
---|
120 | * |
---|
121 | * So far, the only CPUs in which this option has been used are the |
---|
122 | * HP PA-RISC and PowerPC. On the PA-RISC, The HP C compiler and |
---|
123 | * gcc both implicitly used the floating point registers to perform |
---|
124 | * integer multiplies. Similarly, the PowerPC port of gcc has been |
---|
125 | * seen to allocate floating point local variables and touch the FPU |
---|
126 | * even when the flow through a subroutine (like vfprintf()) might |
---|
127 | * not use floating point formats. |
---|
128 | * |
---|
129 | * If a function which you would not think utilize the FP unit DOES, |
---|
130 | * then one can not easily predict which tasks will use the FP hardware. |
---|
131 | * In this case, this option should be TRUE. |
---|
132 | * |
---|
133 | * If @ref CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. |
---|
134 | * |
---|
135 | * Port Specific Information: |
---|
136 | * |
---|
137 | * XXX document implementation including references if appropriate |
---|
138 | */ |
---|
139 | #define CPU_ALL_TASKS_ARE_FP TRUE |
---|
140 | |
---|
141 | /** |
---|
142 | * Should the IDLE task have a floating point context? |
---|
143 | * |
---|
144 | * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task |
---|
145 | * and it has a floating point context which is switched in and out. |
---|
146 | * If FALSE, then the IDLE task does not have a floating point context. |
---|
147 | * |
---|
148 | * Setting this to TRUE negatively impacts the time required to preempt |
---|
149 | * the IDLE task from an interrupt because the floating point context |
---|
150 | * must be saved as part of the preemption. |
---|
151 | * |
---|
152 | * Port Specific Information: |
---|
153 | * |
---|
154 | * XXX document implementation including references if appropriate |
---|
155 | */ |
---|
156 | #define CPU_IDLE_TASK_IS_FP FALSE |
---|
157 | |
---|
158 | /** |
---|
159 | * Should the saving of the floating point registers be deferred |
---|
160 | * until a context switch is made to another different floating point |
---|
161 | * task? |
---|
162 | * |
---|
163 | * If TRUE, then the floating point context will not be stored until |
---|
164 | * necessary. It will remain in the floating point registers and not |
---|
165 | * disturned until another floating point task is switched to. |
---|
166 | * |
---|
167 | * If FALSE, then the floating point context is saved when a floating |
---|
168 | * point task is switched out and restored when the next floating point |
---|
169 | * task is restored. The state of the floating point registers between |
---|
170 | * those two operations is not specified. |
---|
171 | * |
---|
172 | * If the floating point context does NOT have to be saved as part of |
---|
173 | * interrupt dispatching, then it should be safe to set this to TRUE. |
---|
174 | * |
---|
175 | * Setting this flag to TRUE results in using a different algorithm |
---|
176 | * for deciding when to save and restore the floating point context. |
---|
177 | * The deferred FP switch algorithm minimizes the number of times |
---|
178 | * the FP context is saved and restored. The FP context is not saved |
---|
179 | * until a context switch is made to another, different FP task. |
---|
180 | * Thus in a system with only one FP task, the FP context will never |
---|
181 | * be saved or restored. |
---|
182 | * |
---|
183 | * Port Specific Information: |
---|
184 | * |
---|
185 | * XXX document implementation including references if appropriate |
---|
186 | */ |
---|
187 | #define CPU_USE_DEFERRED_FP_SWITCH TRUE |
---|
188 | |
---|
189 | #define CPU_ENABLE_ROBUST_THREAD_DISPATCH FALSE |
---|
190 | |
---|
191 | /** |
---|
192 | * Does this port provide a CPU dependent IDLE task implementation? |
---|
193 | * |
---|
194 | * If TRUE, then the routine @ref _CPU_Thread_Idle_body |
---|
195 | * must be provided and is the default IDLE thread body instead of |
---|
196 | * @ref _CPU_Thread_Idle_body. |
---|
197 | * |
---|
198 | * If FALSE, then use the generic IDLE thread body if the BSP does |
---|
199 | * not provide one. |
---|
200 | * |
---|
201 | * This is intended to allow for supporting processors which have |
---|
202 | * a low power or idle mode. When the IDLE thread is executed, then |
---|
203 | * the CPU can be powered down. |
---|
204 | * |
---|
205 | * The order of precedence for selecting the IDLE thread body is: |
---|
206 | * |
---|
207 | * -# BSP provided |
---|
208 | * -# CPU dependent (if provided) |
---|
209 | * -# generic (if no BSP and no CPU dependent) |
---|
210 | * |
---|
211 | * Port Specific Information: |
---|
212 | * |
---|
213 | * XXX document implementation including references if appropriate |
---|
214 | */ |
---|
215 | #define CPU_PROVIDES_IDLE_THREAD_BODY TRUE |
---|
216 | |
---|
217 | /** |
---|
218 | * Does the stack grow up (toward higher addresses) or down |
---|
219 | * (toward lower addresses)? |
---|
220 | * |
---|
221 | * If TRUE, then the grows upward. |
---|
222 | * If FALSE, then the grows toward smaller addresses. |
---|
223 | * |
---|
224 | * Port Specific Information: |
---|
225 | * |
---|
226 | * XXX document implementation including references if appropriate |
---|
227 | */ |
---|
228 | #define CPU_STACK_GROWS_UP TRUE |
---|
229 | |
---|
230 | /* FIXME: Is this the right value? */ |
---|
231 | #define CPU_CACHE_LINE_BYTES 2 |
---|
232 | |
---|
233 | #define CPU_STRUCTURE_ALIGNMENT RTEMS_ALIGNED( CPU_CACHE_LINE_BYTES ) |
---|
234 | |
---|
235 | /** |
---|
236 | * @ingroup CPUInterrupt |
---|
237 | * |
---|
238 | * The following defines the number of bits actually used in the |
---|
239 | * interrupt field of the task mode. How those bits map to the |
---|
240 | * CPU interrupt levels is defined by the routine @ref _CPU_ISR_Set_level. |
---|
241 | * |
---|
242 | * Port Specific Information: |
---|
243 | * |
---|
244 | * XXX document implementation including references if appropriate |
---|
245 | */ |
---|
246 | #define CPU_MODES_INTERRUPT_MASK 0x00000001 |
---|
247 | |
---|
248 | #define CPU_MAXIMUM_PROCESSORS 32 |
---|
249 | |
---|
250 | /* |
---|
251 | * Processor defined structures required for cpukit/score. |
---|
252 | * |
---|
253 | * Port Specific Information: |
---|
254 | * |
---|
255 | * XXX document implementation including references if appropriate |
---|
256 | */ |
---|
257 | |
---|
258 | /* may need to put some structures here. */ |
---|
259 | |
---|
260 | /** |
---|
261 | * @defgroup CPUContext Processor Dependent Context Management |
---|
262 | * |
---|
263 | * From the highest level viewpoint, there are 2 types of context to save. |
---|
264 | * |
---|
265 | * -# Interrupt registers to save |
---|
266 | * -# Task level registers to save |
---|
267 | * |
---|
268 | * Since RTEMS handles integer and floating point contexts separately, this |
---|
269 | * means we have the following 3 context items: |
---|
270 | * |
---|
271 | * -# task level context stuff:: Context_Control |
---|
272 | * -# floating point task stuff:: Context_Control_fp |
---|
273 | * -# special interrupt level context :: CPU_Interrupt_frame |
---|
274 | * |
---|
275 | * On some processors, it is cost-effective to save only the callee |
---|
276 | * preserved registers during a task context switch. This means |
---|
277 | * that the ISR code needs to save those registers which do not |
---|
278 | * persist across function calls. It is not mandatory to make this |
---|
279 | * distinctions between the caller/callee saves registers for the |
---|
280 | * purpose of minimizing context saved during task switch and on interrupts. |
---|
281 | * If the cost of saving extra registers is minimal, simplicity is the |
---|
282 | * choice. Save the same context on interrupt entry as for tasks in |
---|
283 | * this case. |
---|
284 | * |
---|
285 | * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then |
---|
286 | * care should be used in designing the context area. |
---|
287 | * |
---|
288 | * On some CPUs with hardware floating point support, the Context_Control_fp |
---|
289 | * structure will not be used or it simply consist of an array of a |
---|
290 | * fixed number of bytes. This is done when the floating point context |
---|
291 | * is dumped by a "FP save context" type instruction and the format |
---|
292 | * is not really defined by the CPU. In this case, there is no need |
---|
293 | * to figure out the exact format -- only the size. Of course, although |
---|
294 | * this is enough information for RTEMS, it is probably not enough for |
---|
295 | * a debugger such as gdb. But that is another problem. |
---|
296 | * |
---|
297 | * Port Specific Information: |
---|
298 | * |
---|
299 | * XXX document implementation including references if appropriate |
---|
300 | */ |
---|
301 | /**@{**/ |
---|
302 | |
---|
303 | /** |
---|
304 | * @ingroup Management |
---|
305 | * |
---|
306 | * This defines the minimal set of integer and processor state registers |
---|
307 | * that must be saved during a voluntary context switch from one thread |
---|
308 | * to another. |
---|
309 | */ |
---|
310 | typedef struct { |
---|
311 | /** This will contain the stack pointer. */ |
---|
312 | uint32_t sp; |
---|
313 | /** This will contain the frame base pointer. */ |
---|
314 | uint32_t fb; |
---|
315 | } Context_Control; |
---|
316 | |
---|
317 | /** |
---|
318 | * @ingroup Management |
---|
319 | * |
---|
320 | * This macro returns the stack pointer associated with @a _context. |
---|
321 | * |
---|
322 | * @param[in] _context is the thread context area to access |
---|
323 | * |
---|
324 | * @return This method returns the stack pointer. |
---|
325 | */ |
---|
326 | #define _CPU_Context_Get_SP( _context ) \ |
---|
327 | (_context)->sp |
---|
328 | |
---|
329 | /** |
---|
330 | * @ingroup Management |
---|
331 | * |
---|
332 | * This defines the set of integer and processor state registers that must |
---|
333 | * be saved during an interrupt. This set does not include any which are |
---|
334 | * in @ref Context_Control. |
---|
335 | */ |
---|
336 | typedef struct { |
---|
337 | /** |
---|
338 | * This field is a hint that a port will have a number of integer |
---|
339 | * registers that need to be saved when an interrupt occurs or |
---|
340 | * when a context switch occurs at the end of an ISR. |
---|
341 | */ |
---|
342 | uint32_t special_interrupt_register; |
---|
343 | } CPU_Interrupt_frame; |
---|
344 | |
---|
345 | /** @} */ |
---|
346 | |
---|
347 | /** |
---|
348 | * @defgroup CPUInterrupt Processor Dependent Interrupt Management |
---|
349 | */ |
---|
350 | /**@{**/ |
---|
351 | |
---|
352 | /* |
---|
353 | * Nothing prevents the porter from declaring more CPU specific variables. |
---|
354 | * |
---|
355 | * Port Specific Information: |
---|
356 | * |
---|
357 | * XXX document implementation including references if appropriate |
---|
358 | */ |
---|
359 | |
---|
360 | /* XXX: if needed, put more variables here */ |
---|
361 | |
---|
362 | /** |
---|
363 | * Amount of extra stack (above minimum stack size) required by |
---|
364 | * MPCI receive server thread. Remember that in a multiprocessor |
---|
365 | * system this thread must exist and be able to process all directives. |
---|
366 | * |
---|
367 | * Port Specific Information: |
---|
368 | * |
---|
369 | * XXX document implementation including references if appropriate |
---|
370 | */ |
---|
371 | #define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 |
---|
372 | |
---|
373 | /** |
---|
374 | * This defines the number of entries in the @ref _ISR_Vector_table managed |
---|
375 | * by RTEMS. |
---|
376 | * |
---|
377 | * Port Specific Information: |
---|
378 | * |
---|
379 | * XXX document implementation including references if appropriate |
---|
380 | */ |
---|
381 | #define CPU_INTERRUPT_NUMBER_OF_VECTORS 32 |
---|
382 | |
---|
383 | /** This defines the highest interrupt vector number for this port. */ |
---|
384 | #define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) |
---|
385 | |
---|
386 | /** |
---|
387 | * This is defined if the port has a special way to report the ISR nesting |
---|
388 | * level. Most ports maintain the variable @a _ISR_Nest_level. |
---|
389 | */ |
---|
390 | #define CPU_PROVIDES_ISR_IS_IN_PROGRESS FALSE |
---|
391 | |
---|
392 | /** @} */ |
---|
393 | |
---|
394 | /** |
---|
395 | * @ingroup CPUContext |
---|
396 | * |
---|
397 | * Should be large enough to run all RTEMS tests. This ensures |
---|
398 | * that a "reasonable" small application should not have any problems. |
---|
399 | * |
---|
400 | * Port Specific Information: |
---|
401 | * |
---|
402 | * XXX document implementation including references if appropriate |
---|
403 | */ |
---|
404 | #define CPU_STACK_MINIMUM_SIZE (2048L) |
---|
405 | |
---|
406 | #ifdef __m32cm_cpu__ |
---|
407 | #define CPU_SIZEOF_POINTER 4 |
---|
408 | #else |
---|
409 | #define CPU_SIZEOF_POINTER 2 |
---|
410 | #endif |
---|
411 | |
---|
412 | /** |
---|
413 | * CPU's worst alignment requirement for data types on a byte boundary. This |
---|
414 | * alignment does not take into account the requirements for the stack. |
---|
415 | * |
---|
416 | * Port Specific Information: |
---|
417 | * |
---|
418 | * XXX document implementation including references if appropriate |
---|
419 | */ |
---|
420 | #define CPU_ALIGNMENT 2 |
---|
421 | |
---|
422 | /** |
---|
423 | * This number corresponds to the byte alignment requirement for the |
---|
424 | * heap handler. This alignment requirement may be stricter than that |
---|
425 | * for the data types alignment specified by @ref CPU_ALIGNMENT. It is |
---|
426 | * common for the heap to follow the same alignment requirement as |
---|
427 | * @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is strict enough for |
---|
428 | * the heap, then this should be set to @ref CPU_ALIGNMENT. |
---|
429 | * |
---|
430 | * NOTE: This does not have to be a power of 2 although it should be |
---|
431 | * a multiple of 2 greater than or equal to 2. The requirement |
---|
432 | * to be a multiple of 2 is because the heap uses the least |
---|
433 | * significant field of the front and back flags to indicate |
---|
434 | * that a block is in use or free. So you do not want any odd |
---|
435 | * length blocks really putting length data in that bit. |
---|
436 | * |
---|
437 | * On byte oriented architectures, @ref CPU_HEAP_ALIGNMENT normally will |
---|
438 | * have to be greater or equal to than @ref CPU_ALIGNMENT to ensure that |
---|
439 | * elements allocated from the heap meet all restrictions. |
---|
440 | * |
---|
441 | * Port Specific Information: |
---|
442 | * |
---|
443 | * XXX document implementation including references if appropriate |
---|
444 | */ |
---|
445 | #define CPU_HEAP_ALIGNMENT 4 |
---|
446 | |
---|
447 | /** |
---|
448 | * This number corresponds to the byte alignment requirement for memory |
---|
449 | * buffers allocated by the partition manager. This alignment requirement |
---|
450 | * may be stricter than that for the data types alignment specified by |
---|
451 | * @ref CPU_ALIGNMENT. It is common for the partition to follow the same |
---|
452 | * alignment requirement as @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is |
---|
453 | * strict enough for the partition, then this should be set to |
---|
454 | * @ref CPU_ALIGNMENT. |
---|
455 | * |
---|
456 | * NOTE: This does not have to be a power of 2. It does have to |
---|
457 | * be greater or equal to than @ref CPU_ALIGNMENT. |
---|
458 | * |
---|
459 | * Port Specific Information: |
---|
460 | * |
---|
461 | * XXX document implementation including references if appropriate |
---|
462 | */ |
---|
463 | #define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT |
---|
464 | |
---|
465 | /** |
---|
466 | * This number corresponds to the byte alignment requirement for the |
---|
467 | * stack. This alignment requirement may be stricter than that for the |
---|
468 | * data types alignment specified by @ref CPU_ALIGNMENT. If the |
---|
469 | * @ref CPU_ALIGNMENT is strict enough for the stack, then this should be |
---|
470 | * set to 0. |
---|
471 | * |
---|
472 | * NOTE: This must be a power of 2 either 0 or greater than @ref CPU_ALIGNMENT. |
---|
473 | * |
---|
474 | * Port Specific Information: |
---|
475 | * |
---|
476 | * XXX document implementation including references if appropriate |
---|
477 | */ |
---|
478 | #define CPU_STACK_ALIGNMENT 0 |
---|
479 | |
---|
480 | #define CPU_INTERRUPT_STACK_ALIGNMENT CPU_CACHE_LINE_BYTES |
---|
481 | |
---|
482 | /* |
---|
483 | * ISR handler macros |
---|
484 | */ |
---|
485 | |
---|
486 | /** |
---|
487 | * @ingroup CPUInterrupt |
---|
488 | * |
---|
489 | * Support routine to initialize the RTEMS vector table after it is allocated. |
---|
490 | * |
---|
491 | * Port Specific Information: |
---|
492 | * |
---|
493 | * XXX document implementation including references if appropriate |
---|
494 | */ |
---|
495 | #define _CPU_Initialize_vectors() |
---|
496 | |
---|
497 | /** |
---|
498 | * @ingroup CPUInterrupt |
---|
499 | * |
---|
500 | * Disable all interrupts for an RTEMS critical section. The previous |
---|
501 | * level is returned in @a _isr_cookie. |
---|
502 | * |
---|
503 | * @param[out] _isr_cookie will contain the previous level cookie |
---|
504 | * |
---|
505 | * Port Specific Information: |
---|
506 | * |
---|
507 | * XXX document implementation including references if appropriate |
---|
508 | */ |
---|
509 | #define _CPU_ISR_Disable( _isr_cookie ) \ |
---|
510 | do { \ |
---|
511 | int _flg; \ |
---|
512 | m32c_get_flg( _flg ); \ |
---|
513 | _isr_cookie = _flg; \ |
---|
514 | __asm__ volatile( "fclr I" ); \ |
---|
515 | } while(0) |
---|
516 | |
---|
517 | /** |
---|
518 | * @ingroup CPUInterrupt |
---|
519 | * |
---|
520 | * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). |
---|
521 | * This indicates the end of an RTEMS critical section. The parameter |
---|
522 | * @a _isr_cookie is not modified. |
---|
523 | * |
---|
524 | * @param[in] _isr_cookie contain the previous level cookie |
---|
525 | * |
---|
526 | * Port Specific Information: |
---|
527 | * |
---|
528 | * XXX document implementation including references if appropriate |
---|
529 | */ |
---|
530 | #define _CPU_ISR_Enable(_isr_cookie) \ |
---|
531 | do { \ |
---|
532 | int _flg = (int) (_isr_cookie); \ |
---|
533 | m32c_set_flg( _flg ); \ |
---|
534 | } while(0) |
---|
535 | |
---|
536 | /** |
---|
537 | * @ingroup CPUInterrupt |
---|
538 | * |
---|
539 | * This temporarily restores the interrupt to @a _isr_cookie before immediately |
---|
540 | * disabling them again. This is used to divide long RTEMS critical |
---|
541 | * sections into two or more parts. The parameter @a _isr_cookie is not |
---|
542 | * modified. |
---|
543 | * |
---|
544 | * @param[in] _isr_cookie contain the previous level cookie |
---|
545 | * |
---|
546 | * Port Specific Information: |
---|
547 | * |
---|
548 | * XXX document implementation including references if appropriate |
---|
549 | */ |
---|
550 | #define _CPU_ISR_Flash( _isr_cookie ) \ |
---|
551 | do { \ |
---|
552 | int _flg = (int) (_isr_cookie); \ |
---|
553 | m32c_set_flg( _flg ); \ |
---|
554 | __asm__ volatile( "fclr I" ); \ |
---|
555 | } while(0) |
---|
556 | |
---|
557 | RTEMS_INLINE_ROUTINE bool _CPU_ISR_Is_enabled( uint32_t level ) |
---|
558 | { |
---|
559 | return ( level & 0x40 ) != 0; |
---|
560 | } |
---|
561 | |
---|
562 | /** |
---|
563 | * @ingroup CPUInterrupt |
---|
564 | * |
---|
565 | * This routine and @ref _CPU_ISR_Get_level |
---|
566 | * Map the interrupt level in task mode onto the hardware that the CPU |
---|
567 | * actually provides. Currently, interrupt levels which do not |
---|
568 | * map onto the CPU in a generic fashion are undefined. Someday, |
---|
569 | * it would be nice if these were "mapped" by the application |
---|
570 | * via a callout. For example, m68k has 8 levels 0 - 7, levels |
---|
571 | * 8 - 255 would be available for bsp/application specific meaning. |
---|
572 | *This could be used to manage a programmable interrupt controller |
---|
573 | * via the rtems_task_mode directive. |
---|
574 | * |
---|
575 | * Port Specific Information: |
---|
576 | * |
---|
577 | * XXX document implementation including references if appropriate |
---|
578 | */ |
---|
579 | #define _CPU_ISR_Set_level( _new_level ) \ |
---|
580 | do { \ |
---|
581 | if (_new_level) __asm__ volatile( "fclr I" ); \ |
---|
582 | else __asm__ volatile( "fset I" ); \ |
---|
583 | } while(0) |
---|
584 | |
---|
585 | /** |
---|
586 | * @ingroup CPUInterrupt |
---|
587 | * |
---|
588 | * Return the current interrupt disable level for this task in |
---|
589 | * the format used by the interrupt level portion of the task mode. |
---|
590 | * |
---|
591 | * NOTE: This routine usually must be implemented as a subroutine. |
---|
592 | * |
---|
593 | * Port Specific Information: |
---|
594 | * |
---|
595 | * XXX document implementation including references if appropriate |
---|
596 | */ |
---|
597 | uint32_t _CPU_ISR_Get_level( void ); |
---|
598 | |
---|
599 | /* end of ISR handler macros */ |
---|
600 | |
---|
601 | /* Context handler macros */ |
---|
602 | |
---|
603 | /** |
---|
604 | * @ingroup CPUContext |
---|
605 | * |
---|
606 | * Initialize the context to a state suitable for starting a |
---|
607 | * task after a context restore operation. Generally, this |
---|
608 | * involves: |
---|
609 | * |
---|
610 | * - setting a starting address |
---|
611 | * - preparing the stack |
---|
612 | * - preparing the stack and frame pointers |
---|
613 | * - setting the proper interrupt level in the context |
---|
614 | * - initializing the floating point context |
---|
615 | * |
---|
616 | * This routine generally does not set any unnecessary register |
---|
617 | * in the context. The state of the "general data" registers is |
---|
618 | * undefined at task start time. |
---|
619 | * |
---|
620 | * @param[in] _the_context is the context structure to be initialized |
---|
621 | * @param[in] _stack_base is the lowest physical address of this task's stack |
---|
622 | * @param[in] _size is the size of this task's stack |
---|
623 | * @param[in] _isr is the interrupt disable level |
---|
624 | * @param[in] _entry_point is the thread's entry point. This is |
---|
625 | * always @a _Thread_Handler |
---|
626 | * @param[in] _is_fp is TRUE if the thread is to be a floating |
---|
627 | * point thread. This is typically only used on CPUs where the |
---|
628 | * FPU may be easily disabled by software such as on the SPARC |
---|
629 | * where the PSR contains an enable FPU bit. |
---|
630 | * @param[in] tls_area is the thread-local storage (TLS) area |
---|
631 | * |
---|
632 | * Port Specific Information: |
---|
633 | * |
---|
634 | * XXX document implementation including references if appropriate |
---|
635 | */ |
---|
636 | void _CPU_Context_Initialize( |
---|
637 | Context_Control *the_context, |
---|
638 | uint32_t *stack_base, |
---|
639 | size_t size, |
---|
640 | uint32_t new_level, |
---|
641 | void *entry_point, |
---|
642 | bool is_fp, |
---|
643 | void *tls_area |
---|
644 | ); |
---|
645 | |
---|
646 | /** |
---|
647 | * This routine is responsible for somehow restarting the currently |
---|
648 | * executing task. If you are lucky, then all that is necessary |
---|
649 | * is restoring the context. Otherwise, there will need to be |
---|
650 | * a special assembly routine which does something special in this |
---|
651 | * case. For many ports, simply adding a label to the restore path |
---|
652 | * of @ref _CPU_Context_switch will work. On other ports, it may be |
---|
653 | * possibly to load a few arguments and jump to the restore path. It will |
---|
654 | * not work if restarting self conflicts with the stack frame |
---|
655 | * assumptions of restoring a context. |
---|
656 | * |
---|
657 | * Port Specific Information: |
---|
658 | * |
---|
659 | * XXX document implementation including references if appropriate |
---|
660 | */ |
---|
661 | void _CPU_Context_Restart_self( |
---|
662 | Context_Control *the_context |
---|
663 | ) RTEMS_NO_RETURN; |
---|
664 | |
---|
665 | /** |
---|
666 | * This routine initializes the FP context area passed to it to. |
---|
667 | * There are a few standard ways in which to initialize the |
---|
668 | * floating point context. The code included for this macro assumes |
---|
669 | * that this is a CPU in which a "initial" FP context was saved into |
---|
670 | * @a _CPU_Null_fp_context and it simply copies it to the destination |
---|
671 | * context passed to it. |
---|
672 | * |
---|
673 | * Other floating point context save/restore models include: |
---|
674 | * -# not doing anything, and |
---|
675 | * -# putting a "null FP status word" in the correct place in the FP context. |
---|
676 | * |
---|
677 | * @param[in] _destination is the floating point context area |
---|
678 | * |
---|
679 | * Port Specific Information: |
---|
680 | * |
---|
681 | * XXX document implementation including references if appropriate |
---|
682 | */ |
---|
683 | #define _CPU_Context_Initialize_fp( _destination ) \ |
---|
684 | { \ |
---|
685 | *(*(_destination)) = _CPU_Null_fp_context; \ |
---|
686 | } |
---|
687 | |
---|
688 | /* end of Context handler macros */ |
---|
689 | |
---|
690 | /* Fatal Error manager macros */ |
---|
691 | |
---|
692 | /** |
---|
693 | * This routine copies _error into a known place -- typically a stack |
---|
694 | * location or a register, optionally disables interrupts, and |
---|
695 | * halts/stops the CPU. |
---|
696 | * |
---|
697 | * Port Specific Information: |
---|
698 | * |
---|
699 | * XXX document implementation including references if appropriate |
---|
700 | */ |
---|
701 | #define _CPU_Fatal_halt( _source, _error ) \ |
---|
702 | { \ |
---|
703 | } |
---|
704 | |
---|
705 | /* end of Fatal Error manager macros */ |
---|
706 | |
---|
707 | #define CPU_USE_GENERIC_BITFIELD_CODE TRUE |
---|
708 | |
---|
709 | /* functions */ |
---|
710 | |
---|
711 | /** |
---|
712 | * This routine performs CPU dependent initialization. |
---|
713 | * |
---|
714 | * Port Specific Information: |
---|
715 | * |
---|
716 | * XXX document implementation including references if appropriate |
---|
717 | */ |
---|
718 | void _CPU_Initialize(void); |
---|
719 | |
---|
720 | /** |
---|
721 | * @ingroup CPUInterrupt |
---|
722 | * |
---|
723 | * This routine installs a "raw" interrupt handler directly into the |
---|
724 | * processor's vector table. |
---|
725 | * |
---|
726 | * @param[in] vector is the vector number |
---|
727 | * @param[in] new_handler is the raw ISR handler to install |
---|
728 | * @param[in] old_handler is the previously installed ISR Handler |
---|
729 | * |
---|
730 | * Port Specific Information: |
---|
731 | * |
---|
732 | * XXX document implementation including references if appropriate |
---|
733 | */ |
---|
734 | void _CPU_ISR_install_raw_handler( |
---|
735 | uint32_t vector, |
---|
736 | proc_ptr new_handler, |
---|
737 | proc_ptr *old_handler |
---|
738 | ); |
---|
739 | |
---|
740 | /** |
---|
741 | * @ingroup CPUInterrupt |
---|
742 | * |
---|
743 | * This routine installs an interrupt vector. |
---|
744 | * |
---|
745 | * @param[in] vector is the vector number |
---|
746 | * @param[in] new_handler is the RTEMS ISR handler to install |
---|
747 | * @param[in] old_handler is the previously installed ISR Handler |
---|
748 | * |
---|
749 | * Port Specific Information: |
---|
750 | * |
---|
751 | * XXX document implementation including references if appropriate |
---|
752 | */ |
---|
753 | void _CPU_ISR_install_vector( |
---|
754 | uint32_t vector, |
---|
755 | proc_ptr new_handler, |
---|
756 | proc_ptr *old_handler |
---|
757 | ); |
---|
758 | |
---|
759 | /** |
---|
760 | * This routine is the CPU dependent IDLE thread body. |
---|
761 | * |
---|
762 | * NOTE: It need only be provided if @ref CPU_PROVIDES_IDLE_THREAD_BODY |
---|
763 | * is TRUE. |
---|
764 | * |
---|
765 | * Port Specific Information: |
---|
766 | * |
---|
767 | * XXX document implementation including references if appropriate |
---|
768 | */ |
---|
769 | void *_CPU_Thread_Idle_body( uintptr_t ignored ); |
---|
770 | |
---|
771 | /** |
---|
772 | * @ingroup CPUContext |
---|
773 | * |
---|
774 | * This routine switches from the run context to the heir context. |
---|
775 | * |
---|
776 | * @param[in] run points to the context of the currently executing task |
---|
777 | * @param[in] heir points to the context of the heir task |
---|
778 | * |
---|
779 | * Port Specific Information: |
---|
780 | * |
---|
781 | * XXX document implementation including references if appropriate |
---|
782 | */ |
---|
783 | void _CPU_Context_switch( |
---|
784 | Context_Control *run, |
---|
785 | Context_Control *heir |
---|
786 | ); |
---|
787 | |
---|
788 | /** |
---|
789 | * @ingroup CPUContext |
---|
790 | * |
---|
791 | * This routine is generally used only to restart self in an |
---|
792 | * efficient manner. It may simply be a label in @ref _CPU_Context_switch. |
---|
793 | * |
---|
794 | * @param[in] new_context points to the context to be restored. |
---|
795 | * |
---|
796 | * NOTE: May be unnecessary to reload some registers. |
---|
797 | * |
---|
798 | * Port Specific Information: |
---|
799 | * |
---|
800 | * XXX document implementation including references if appropriate |
---|
801 | */ |
---|
802 | void _CPU_Context_restore( |
---|
803 | Context_Control *new_context |
---|
804 | ) RTEMS_NO_RETURN; |
---|
805 | |
---|
806 | /* FIXME */ |
---|
807 | typedef CPU_Interrupt_frame CPU_Exception_frame; |
---|
808 | |
---|
809 | void _CPU_Exception_frame_print( const CPU_Exception_frame *frame ); |
---|
810 | |
---|
811 | /** |
---|
812 | * @ingroup CPUEndian |
---|
813 | * |
---|
814 | * The following routine swaps the endian format of an unsigned int. |
---|
815 | * It must be static because it is referenced indirectly. |
---|
816 | * |
---|
817 | * This version will work on any processor, but if there is a better |
---|
818 | * way for your CPU PLEASE use it. The most common way to do this is to: |
---|
819 | * |
---|
820 | * swap least significant two bytes with 16-bit rotate |
---|
821 | * swap upper and lower 16-bits |
---|
822 | * swap most significant two bytes with 16-bit rotate |
---|
823 | * |
---|
824 | * Some CPUs have special instructions which swap a 32-bit quantity in |
---|
825 | * a single instruction (e.g. i486). It is probably best to avoid |
---|
826 | * an "endian swapping control bit" in the CPU. One good reason is |
---|
827 | * that interrupts would probably have to be disabled to ensure that |
---|
828 | * an interrupt does not try to access the same "chunk" with the wrong |
---|
829 | * endian. Another good reason is that on some CPUs, the endian bit |
---|
830 | * endianness for ALL fetches -- both code and data -- so the code |
---|
831 | * will be fetched incorrectly. |
---|
832 | * |
---|
833 | * @param[in] value is the value to be swapped |
---|
834 | * @return the value after being endian swapped |
---|
835 | * |
---|
836 | * Port Specific Information: |
---|
837 | * |
---|
838 | * XXX document implementation including references if appropriate |
---|
839 | */ |
---|
840 | static inline uint32_t CPU_swap_u32( |
---|
841 | uint32_t value |
---|
842 | ) |
---|
843 | { |
---|
844 | uint32_t byte1, byte2, byte3, byte4, swapped; |
---|
845 | |
---|
846 | byte4 = (value >> 24) & 0xff; |
---|
847 | byte3 = (value >> 16) & 0xff; |
---|
848 | byte2 = (value >> 8) & 0xff; |
---|
849 | byte1 = value & 0xff; |
---|
850 | |
---|
851 | swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; |
---|
852 | return swapped; |
---|
853 | } |
---|
854 | |
---|
855 | /** |
---|
856 | * @ingroup CPUEndian |
---|
857 | * |
---|
858 | * This routine swaps a 16 bir quantity. |
---|
859 | * |
---|
860 | * @param[in] value is the value to be swapped |
---|
861 | * @return the value after being endian swapped |
---|
862 | */ |
---|
863 | #define CPU_swap_u16( value ) \ |
---|
864 | (((value&0xff) << 8) | ((value >> 8)&0xff)) |
---|
865 | |
---|
866 | typedef uint32_t CPU_Counter_ticks; |
---|
867 | |
---|
868 | uint32_t _CPU_Counter_frequency( void ); |
---|
869 | |
---|
870 | CPU_Counter_ticks _CPU_Counter_read( void ); |
---|
871 | |
---|
872 | static inline CPU_Counter_ticks _CPU_Counter_difference( |
---|
873 | CPU_Counter_ticks second, |
---|
874 | CPU_Counter_ticks first |
---|
875 | ) |
---|
876 | { |
---|
877 | return second - first; |
---|
878 | } |
---|
879 | |
---|
880 | /** Type that can store a 32-bit integer or a pointer. */ |
---|
881 | typedef unsigned long CPU_Uint32ptr; |
---|
882 | |
---|
883 | #ifdef __cplusplus |
---|
884 | } |
---|
885 | #endif |
---|
886 | |
---|
887 | #endif |
---|