source: rtems/cpukit/score/cpu/avr/avr/io4433.h @ 04a62dce

/* Copyright (c) 2002, Marek Michalkiewicz
   All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are met:

   * Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

   * Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in
     the documentation and/or other materials provided with the
     distribution.

   * Neither the name of the copyright holders nor the names of
     contributors may be used to endorse or promote products derived
     from this software without specific prior written permission.

  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  POSSIBILITY OF SUCH DAMAGE. */

/* $Id$ */

/* avr/io4433.h - definitions for AT90S4433 */

#ifndef _AVR_IO4433_H_
#define _AVR_IO4433_H_ 1

/* This file should only be included from <avr/io.h>, never directly. */

#ifndef _AVR_IO_H_
#  error "Include <avr/io.h> instead of this file."
#endif

#ifndef _AVR_IOXXX_H_
#  define _AVR_IOXXX_H_ "io4433.h"
#else
#  error "Attempt to include more than one <avr/ioXXX.h> file."
#endif 

/* I/O registers */

/* UART Baud Rate Register high */
#define UBRRH   _SFR_IO8(0x03)

/* ADC Data register */
#ifndef __ASSEMBLER__
#define ADC     _SFR_IO16(0x04)
#endif
#define ADCW    _SFR_IO16(0x04)
#define ADCL    _SFR_IO8(0x04)
#define ADCH    _SFR_IO8(0x05)

/* ADC Control and Status Register */
#define ADCSR   _SFR_IO8(0x06)

/* ADC MUX */
#define ADMUX   _SFR_IO8(0x07)

/* Analog Comparator Control and Status Register */
#define ACSR    _SFR_IO8(0x08)

/* UART Baud Rate Register */
#define UBRR    _SFR_IO8(0x09)

/* UART Control/Status Registers */
#define UCSRB   _SFR_IO8(0x0A)
#define UCSRA   _SFR_IO8(0x0B)

/* UART I/O Data Register */
#define UDR     _SFR_IO8(0x0C)

/* SPI Control Register */
#define SPCR    _SFR_IO8(0x0D)

/* SPI Status Register */
#define SPSR    _SFR_IO8(0x0E)

/* SPI I/O Data Register */
#define SPDR    _SFR_IO8(0x0F)

/* Input Pins, Port D */
#define PIND    _SFR_IO8(0x10)

/* Data Direction Register, Port D */
#define DDRD    _SFR_IO8(0x11)

/* Data Register, Port D */
#define PORTD   _SFR_IO8(0x12)

/* Input Pins, Port C */
#define PINC    _SFR_IO8(0x13)

/* Data Direction Register, Port C */
#define DDRC    _SFR_IO8(0x14)

/* Data Register, Port C */
#define PORTC   _SFR_IO8(0x15)

/* Input Pins, Port B */
#define PINB    _SFR_IO8(0x16)

/* Data Direction Register, Port B */
#define DDRB    _SFR_IO8(0x17)

/* Data Register, Port B */
#define PORTB   _SFR_IO8(0x18)

/* EEPROM Control Register */
#define EECR    _SFR_IO8(0x1C)

/* EEPROM Data Register */
#define EEDR    _SFR_IO8(0x1D)

/* EEPROM Address Register */
#define EEAR    _SFR_IO8(0x1E)
#define EEARL   _SFR_IO8(0x1E)

/* Watchdog Timer Control Register */
#define WDTCR   _SFR_IO8(0x21)

/* T/C 1 Input Capture Register */
#define ICR1    _SFR_IO16(0x26)
#define ICR1L   _SFR_IO8(0x26)
#define ICR1H   _SFR_IO8(0x27)

/* Timer/Counter1 Output Compare Register A */
#define OCR1    _SFR_IO16(0x2A)
#define OCR1L   _SFR_IO8(0x2A)
#define OCR1H   _SFR_IO8(0x2B)

/* Timer/Counter 1 */
#define TCNT1   _SFR_IO16(0x2C)
#define TCNT1L  _SFR_IO8(0x2C)
#define TCNT1H  _SFR_IO8(0x2D)

/* Timer/Counter 1 Control and Status Register */
#define TCCR1B  _SFR_IO8(0x2E)

/* Timer/Counter 1 Control Register */
#define TCCR1A  _SFR_IO8(0x2F)

/* Timer/Counter 0 */
#define TCNT0   _SFR_IO8(0x32)

/* Timer/Counter 0 Control Register */
#define TCCR0   _SFR_IO8(0x33)

/* MCU general Status Register */
#define MCUSR   _SFR_IO8(0x34)

/* MCU general Control Register */
#define MCUCR   _SFR_IO8(0x35)

/* Timer/Counter Interrupt Flag register */
#define TIFR    _SFR_IO8(0x38)

/* Timer/Counter Interrupt MaSK register */
#define TIMSK   _SFR_IO8(0x39)

/* General Interrupt Flag Register */
#define GIFR    _SFR_IO8(0x3A)

/* General Interrupt MaSK register */
#define GIMSK   _SFR_IO8(0x3B)

/* 0x3D..0x3E SP */

/* 0x3F SREG */

/* Interrupt vectors */

/* External Interrupt 0 */
#define INT0_vect                       _VECTOR(1)
#define SIG_INTERRUPT0                  _VECTOR(1)

/* External Interrupt 1 */
#define INT1_vect                       _VECTOR(2)
#define SIG_INTERRUPT1                  _VECTOR(2)

/* Timer/Counter Capture Event */
#define TIMER1_CAPT_vect                _VECTOR(3)
#define SIG_INPUT_CAPTURE1              _VECTOR(3)

/* Timer/Counter1 Compare Match */
#define TIMER1_COMP_vect                _VECTOR(4)
#define SIG_OUTPUT_COMPARE1A            _VECTOR(4)

/* Timer/Counter1 Overflow */
#define TIMER1_OVF_vect                 _VECTOR(5)
#define SIG_OVERFLOW1                   _VECTOR(5)

/* Timer/Counter0 Overflow */
#define TIMER0_OVF_vect                 _VECTOR(6)
#define SIG_OVERFLOW0                   _VECTOR(6)

/* Serial Transfer Complete */
#define SPI_STC_vect                    _VECTOR(7)
#define SIG_SPI                         _VECTOR(7)

/* UART, Rx Complete */
#define UART_RX_vect                    _VECTOR(8)
#define SIG_UART_RECV                   _VECTOR(8)

/* UART Data Register Empty */
#define UART_UDRE_vect                  _VECTOR(9)
#define SIG_UART_DATA                   _VECTOR(9)

/* UART, Tx Complete */
#define UART_TX_vect                    _VECTOR(10)
#define SIG_UART_TRANS                  _VECTOR(10)

/* ADC Conversion Complete */
#define ADC_vect                        _VECTOR(11)
#define SIG_ADC                         _VECTOR(11)

/* EEPROM Ready */
#define EE_RDY_vect                     _VECTOR(12)
#define SIG_EEPROM_READY                _VECTOR(12)

/* Analog Comparator */
#define ANA_COMP_vect                   _VECTOR(13)
#define SIG_COMPARATOR                  _VECTOR(13)

#define _VECTORS_SIZE 28

/*
   The Register Bit names are represented by their bit number (0-7).
*/

/* MCU general Status Register */
#define    WDRF        3
#define    BORF        2
#define    EXTRF       1
#define    PORF        0

/* General Interrupt MaSK register */
#define    INT1        7
#define    INT0        6

/* General Interrupt Flag Register */
#define    INTF1       7
#define    INTF0       6

/* Timer/Counter Interrupt MaSK register */
#define    TOIE1       7
#define    OCIE1       6
#define    TICIE1      3
#define    TOIE0       1

/* Timer/Counter Interrupt Flag register */
#define    TOV1         7
#define    OCF1         6
#define    ICF1         3
#define    TOV0         1

/* MCU general Control Register */
#define    SE           5
#define    SM           4
#define    ISC11        3
#define    ISC10        2
#define    ISC01        1
#define    ISC00        0

/* Timer/Counter 0 Control Register */
#define    CS02         2
#define    CS01         1
#define    CS00         0

/* Timer/Counter 1 Control Register */
#define    COM11        7
#define    COM10        6
#define    PWM11        1
#define    PWM10        0

/* Timer/Counter 1 Control and Status Register */
#define    ICNC1        7
#define    ICES1        6
#define    CTC1         3
#define    CS12         2
#define    CS11         1
#define    CS10         0

/* Watchdog Timer Control Register */
#define    WDTOE        4
#define    WDE          3
#define    WDP2         2
#define    WDP1         1
#define    WDP0         0

/* SPI Control Register */
#define    SPIE       7
#define    SPE        6
#define    DORD       5
#define    MSTR       4
#define    CPOL       3
#define    CPHA       2
#define    SPR1       1
#define    SPR0       0

/* SPI Status Register */
#define    SPIF       7
#define    WCOL       6

/* UART Status Register */
#define    RXC        7
#define    TXC        6
#define    UDRE       5
#define    FE         4
#define    DOR        3
#define    MPCM       0

/* UART Control Register */
#define    RXCIE      7
#define    TXCIE      6
#define    UDRIE      5
#define    RXEN       4
#define    TXEN       3
#define    CHR9       2
#define    RXB8       1
#define    TXB8       0

/* Analog Comparator Control and Status Register */
#define    ACD        7
#define    AINBG      6
#define    ACO        5
#define    ACI        4
#define    ACIE       3
#define    ACIC       2
#define    ACIS1      1
#define    ACIS0      0

/* ADC MUX */
#define    ACDBG      6
#define    MUX2       2
#define    MUX1       1
#define    MUX0       0

/* ADC Control and Status Register */
#define    ADEN       7
#define    ADSC       6
#define    ADFR       5
#define    ADIF       4
#define    ADIE       3
#define    ADPS2      2
#define    ADPS1      1
#define    ADPS0      0

/* Data Register, Port B */
#define    PB5      5
#define    PB4      4
#define    PB3      3
#define    PB2      2
#define    PB1      1
#define    PB0      0

/* Data Direction Register, Port B */
#define    DDB5     5
#define    DDB4     4
#define    DDB3     3
#define    DDB2     2
#define    DDB1     1
#define    DDB0     0

/* Input Pins, Port B */
#define    PINB5    5
#define    PINB4    4
#define    PINB3    3
#define    PINB2    2
#define    PINB1    1
#define    PINB0    0

/* Data Register, Port C */
#define    PC5      5
#define    PC4      4
#define    PC3      3
#define    PC2      2
#define    PC1      1
#define    PC0      0

/* Data Direction Register, Port C */
#define    DDC5     5
#define    DDC4     4
#define    DDC3     3
#define    DDC2     2
#define    DDC1     1
#define    DDC0     0

/* Input Pins, Port C */
#define    PINC5    5
#define    PINC4    4
#define    PINC3    3
#define    PINC2    2
#define    PINC1    1
#define    PINC0    0

/* Data Register, Port D */
#define    PD7      7
#define    PD6      6
#define    PD5      5
#define    PD4      4
#define    PD3      3
#define    PD2      2
#define    PD1      1
#define    PD0      0

/* Data Direction Register, Port D */
#define    DDD7     7
#define    DDD6     6
#define    DDD5     5
#define    DDD4     4
#define    DDD3     3
#define    DDD2     2
#define    DDD1     1
#define    DDD0     0

/* Input Pins, Port D */
#define    PIND7     7
#define    PIND6     6
#define    PIND5     5
#define    PIND4     4
#define    PIND3     3
#define    PIND2     2
#define    PIND1     1
#define    PIND0     0

/* EEPROM Control Register */
#define    EERIE     3
#define    EEMWE     2
#define    EEWE      1
#define    EERE      0

/* Constants */
#define RAMEND     0xDF    /*Last On-Chip SRAM location*/
#define XRAMEND    RAMEND
#define E2END      0xFF
#define E2PAGESIZE 0
#define FLASHEND   0xFFF


/* Fuses */
#define FUSE_MEMORY_SIZE 1

/* Low Fuse Byte */
#define FUSE_CKSEL0 (unsigned char)~_BV(0)
#define FUSE_CKSEL1 (unsigned char)~_BV(1)
#define FUSE_CKSEL2 (unsigned char)~_BV(2)
#define FUSE_BODEN (unsigned char)~_BV(3)
#define FUSE_BODLEVEL (unsigned char)~_BV(4)
#define FUSE_SPIEN (unsigned char)~_BV(5)
#define LFUSE_DEFAULT (0xFF)


/* Lock Bits */
#define __LOCK_BITS_EXIST


/* Signature */
#define SIGNATURE_0 0x1E
#define SIGNATURE_1 0x92
#define SIGNATURE_2 0x03


#endif /* _AVR_IO4433_H_ */