Context Navigation

confdefs.h @ 8fbe2e6

4.115

Last change on this file since 8fbe2e6 was 8fbe2e6, checked in by Joel Sherrill <joel.sherrill@…>, on 09/04/14 at 13:59:49

Use correct prototype of benchmark_timer_read()

This change starts with removing the effectively empty file
timerdrv.h. The prototypes for benchmark_timer_XXX() were in
btimer.h which was not universally used. Thus every use of
timerdrv.h had to be changed to btimer.h. Then the prototypes
for benchmark_timer_read() had to be adjusted to return
benchmark_timer_t rather than int or uint32_t.

I took this opportunity to also correct the file headers to
separate the copyright from the file description comments which
is needed to ensure the copyright isn't propagated into Doxygen
output.

Property mode set to 100644

File size: 97.9 KB

Rev	Line
[b96254f]	1	/**
[27f071cd]	2	* @file
[08bae5e6]	3	*
[9ab091e]	4	* @brief Configuration Table Template that will be Instantiated
	5	* by an Application
	6	*
[27f071cd]	7	* This include file contains the configuration table template that will
	8	* be instantiated by an application based on the setting of a number
	9	* of macros. The macros are documented in the Configuring a System
	10	* chapter of the Classic API User's Guide
[08bae5e6]	11	*
[27f071cd]	12	* The model is to estimate the memory required for each configured item
	13	* and sum those estimates. The estimate can be too high or too low for
	14	* a variety of reasons:
[df49c60]	15	*
[27f071cd]	16	* Reasons estimate is too high:
	17	* + FP contexts (not all tasks are FP)
[df49c60]	18	*
[27f071cd]	19	* Reasons estimate is too low:
	20	* + stacks greater than minimum size
	21	* + messages
	22	* + application must account for device driver resources
	23	* + application must account for add-on library resource requirements
[df49c60]	24	*
[27f071cd]	25	* NOTE: Eventually this may be able to take into account some of
	26	* the above. This procedure has evolved from just enough to
	27	* support the RTEMS Test Suites into something that can be
	28	* used remarkably reliably by most applications.
[b96254f]	29	*/
[28352fae]	30
	31	/*
[e6c87f7]	32	* COPYRIGHT (c) 1989-2014.
[08bae5e6]	33	* On-Line Applications Research Corporation (OAR).
	34	*
[98e4ebf5]	35	* The license and distribution terms for this file may be
	36	* found in the file LICENSE in this distribution or at
[c499856]	37	* http://www.rtems.org/license/LICENSE.
[08bae5e6]	38	*/
	39
	40	#ifndef __CONFIGURATION_TEMPLATE_h
	41	#define __CONFIGURATION_TEMPLATE_h
[8486081]	42
[9c63d90]	43	/*
	44	* Include the executive's configuration
	45	*/
[58fa947]	46	#include <rtems.h>
[b2b143f4]	47	#include <rtems/score/apimutex.h>
[9fa3cf0d]	48	#include <rtems/score/wkspace.h>
[9c63d90]	49
[7571a23]	50	#ifdef CONFIGURE_DISABLE_BSP_SETTINGS
	51	#undef BSP_DEFAULT_UNIFIED_WORK_AREAS
	52	#undef BSP_IDLE_TASK_BODY
	53	#undef BSP_IDLE_TASK_STACK_SIZE
	54	#undef BSP_INITIAL_EXTENSION
	55	#undef BSP_INTERRUPT_STACK_SIZE
	56	#undef BSP_MAXIMUM_DEVICES
	57	#undef BSP_ZERO_WORKSPACE_AUTOMATICALLY
	58	#undef CONFIGURE_BSP_PREREQUISITE_DRIVERS
	59	#undef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK
	60	#else
	61	#include <bsp.h>
	62	#endif
	63
[9c9b62d8]	64	#ifdef RTEMS_NEWLIB
	65	#include <sys/reent.h>
	66	#endif
	67
[5877cc3a]	68	#ifdef __cplusplus
	69	extern "C" {
	70	#endif
	71
[08bae5e6]	72	extern rtems_initialization_tasks_table Initialization_tasks[];
[976162a6]	73	#if defined(RTEMS_MULTIPROCESSING)
	74	extern rtems_multiprocessing_table Multiprocessing_configuration;
	75	#endif
[2eba45d]	76	#ifdef RTEMS_POSIX_API
[5877cc3a]	77	extern posix_api_configuration_table Configuration_POSIX_API;
[2eba45d]	78	#endif
[08bae5e6]	79
[5877cc3a]	80	/**
[27f071cd]	81	* This macro determines whether the RTEMS reentrancy support for
	82	* the Newlib C Library is enabled.
[3b89891]	83	*/
[5aecf664]	84	#ifdef RTEMS_SCHEDSIM
	85	#undef RTEMS_NEWLIB
	86	#endif
	87
[5877cc3a]	88	#if (defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY))
[c3db01d0]	89	#define CONFIGURE_NEWLIB_EXTENSION 1
[623893c]	90	#else
[c3db01d0]	91	#define CONFIGURE_NEWLIB_EXTENSION 0
[9c63d90]	92	#endif
[623893c]	93
[5aecf664]	94	#ifndef RTEMS_SCHEDSIM
[d40da79b]	95	#include <rtems/libio.h>
	96
	97	#ifdef CONFIGURE_INIT
[a290fbe9]	98	const rtems_libio_helper rtems_libio_init_helper =
	99	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	100	rtems_libio_helper_null;
	101	#else
[d40da79b]	102	rtems_libio_init;
[a290fbe9]	103	#endif
[d40da79b]	104
[5fa0e5c5]	105	const rtems_libio_helper rtems_libio_post_driver_helper =
[a290fbe9]	106	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	107	rtems_libio_helper_null;
	108	#else
[5fa0e5c5]	109	rtems_libio_post_driver;
[a290fbe9]	110	#endif
[d40da79b]	111
[b7cf1ff7]	112	const rtems_libio_helper rtems_libio_exit_helper =
	113	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	114	rtems_libio_helper_null;
	115	#else
	116	rtems_libio_exit;
	117	#endif
	118
[a290fbe9]	119	const rtems_libio_helper rtems_fs_init_helper =
	120	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	121	rtems_libio_helper_null;
	122	#else
[d40da79b]	123	rtems_filesystem_initialize;
[a290fbe9]	124	#endif
[d40da79b]	125	#endif
[5aecf664]	126	#endif
[d40da79b]	127
[717391f5]	128	/*
[739329f]	129	* If the application disables the filesystem, they will not need
	130	* a mount table, so do not produce one.
[717391f5]	131	*/
[739329f]	132	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	133	#define CONFIGURE_HAS_OWN_MOUNT_TABLE
[d40da79b]	134	#endif
	135
[5877cc3a]	136	/**
[27f071cd]	137	* This macro defines the number of POSIX file descriptors allocated
	138	* and managed by libio. These are the "integer" file descriptors that
	139	* are used by calls like open(2) and read(2).
[df49c60]	140	*/
[bd9c3d1]	141	#ifndef CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS
[5877cc3a]	142	#define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 3
[bd9c3d1]	143	#endif
	144
[5877cc3a]	145	/**
[27f071cd]	146	* Semaphore count used by the IO library.
[5877cc3a]	147	*/
[5a4bb75]	148	#define CONFIGURE_LIBIO_SEMAPHORES 1
[bd9c3d1]	149
[5c0c0cf]	150	/**
	151	* POSIX key count used by the IO library.
	152	*/
	153	#define CONFIGURE_LIBIO_POSIX_KEYS 1
	154
[43908825]	155	#ifdef CONFIGURE_INIT
[5877cc3a]	156	/**
[27f071cd]	157	* When instantiating the configuration tables, this variable is
	158	* initialized to specify the maximum number of file descriptors.
[5877cc3a]	159	*/
	160	uint32_t rtems_libio_number_iops = CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS;
[43908825]	161	#endif
	162
[5877cc3a]	163	/**
[27f071cd]	164	* This macro determines if termios is disabled by this application.
	165	* This only means that resources will not be reserved. If you end
	166	* up using termios, it will fail.
[df49c60]	167	*/
	168	#ifdef CONFIGURE_TERMIOS_DISABLED
[5877cc3a]	169	#define CONFIGURE_TERMIOS_SEMAPHORES 0
[df49c60]	170	#else
[5877cc3a]	171	/**
[27f071cd]	172	* This macro specifies the number of serial or PTY ports that will
	173	* use termios.
[5877cc3a]	174	*/
	175	#ifndef CONFIGURE_NUMBER_OF_TERMIOS_PORTS
	176	#define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 1
	177	#endif
[df49c60]	178
[5877cc3a]	179	/**
[27f071cd]	180	* This macro reserves the number of semaphores required by termios
	181	* based upon the number of communication ports that will use it.
[5877cc3a]	182	*/
	183	#define CONFIGURE_TERMIOS_SEMAPHORES \
	184	((CONFIGURE_NUMBER_OF_TERMIOS_PORTS * 4) + 1)
[df49c60]	185	#endif
	186
[5877cc3a]	187	/**
[27f071cd]	188	* This macro specifies the number of PTYs that can be concurrently
	189	* active.
[d3d2afdf]	190	*/
	191	#ifndef CONFIGURE_MAXIMUM_PTYS
[5877cc3a]	192	#define CONFIGURE_MAXIMUM_PTYS 0
[d3d2afdf]	193	#endif
	194
[5877cc3a]	195	/**
[27f071cd]	196	* This variable contains the maximum number of PTYs that can be
	197	* concurrently active.
[5877cc3a]	198	*/
[d3d2afdf]	199	#ifdef CONFIGURE_INIT
[396e3258]	200	int rtems_telnetd_maximum_ptys = CONFIGURE_MAXIMUM_PTYS;
[d3d2afdf]	201	#else
[396e3258]	202	extern int rtems_telnetd_maximum_ptys;
[d3d2afdf]	203	#endif
	204
[06dcaf0]	205	#if defined(RTEMS_SMP)
	206	/*
	207	* If configured for SMP, then we need to know the maximum CPU cores.
	208	*/
	209	#if !defined(CONFIGURE_SMP_APPLICATION)
[9ab091e]	210	#if !defined(CONFIGURE_SMP_MAXIMUM_PROCESSORS)
[06dcaf0]	211	#define CONFIGURE_SMP_MAXIMUM_PROCESSORS 1
	212	#endif
	213	#else
[9ab091e]	214	#if !defined(CONFIGURE_SMP_MAXIMUM_PROCESSORS)
[06dcaf0]	215	#error "CONFIGURE_SMP_MAXIMUM_PROCESSORS not specified for SMP Application"
	216	#endif
	217	#endif
	218	#endif
	219
[29e92b0]	220	/*
	221	* Filesystems and Mount Table Configuration.
	222	*
	223	* Defines to control the file system:
	224	*
	225	* CONFIGURE_APPLICATION_DISABLE_FILESYSTEM:
	226	* Disable the RTEMS filesystems. You get an empty DEVFS.
	227	*
	228	* CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM:
	229	* Use the DEVFS as the root file system. Limited functions are
	230	* provided when this is used.
	231	*
	232	* CONFIGURE_FILESYSTEM_ALL:
	233	* Add file filesystems to the default filesystem table.
	234	*
	235	* List of available file systems. You can define as many as you like:
[59673224]	236	* CONFIGURE_FILESYSTEM_MINIIMFS - MiniIMFS, use DEVFS now
[29e92b0]	237	* CONFIGURE_FILESYSTEM_IMFS - In Memory File System (IMFS)
	238	* CONFIGURE_FILESYSTEM_DEVFS - Device File System (DSVFS)
	239	* CONFIGURE_FILESYSTEM_TFTPFS - TFTP File System, networking enabled
	240	* CONFIGURE_FILESYSTEM_FTPFS - FTP File System, networking enabled
[59673224]	241	* CONFIGURE_FILESYSTEM_NFS - Network File System, networking enabled
[29e92b0]	242	* CONFIGURE_FILESYSTEM_DOSFS - DOS File System, uses libblock
	243	* CONFIGURE_FILESYSTEM_RFS - RTEMS File System (RFS), uses libblock
[3c96bee]	244	* CONFIGURE_FILESYSTEM_JFFS2 - Journalling Flash File System, Version 2
[29e92b0]	245	*
	246	* Combinations:
	247	*
	248	* - If nothing is defined the base file system is the IMFS.
	249	*
	250	* - If CONFIGURE_APPLICATION_DISABLE_FILESYSTEM is defined all filesystem
	251	* are disabled by force and an empty DEVFS is created.
	252	*
	253	* - If CONFIGURE_USE_DEV_AS_BASE_FILESYSTEM is defined all filesystem
	254	* are disabled by force and DEVFS is defined.
	255	*/
	256
[d40da79b]	257	#ifdef CONFIGURE_INIT
[29e92b0]	258
	259	/*
	260	* Include all file systems. Do this before checking if the filesystem has
	261	* been disabled.
	262	*/
	263	#ifdef CONFIGURE_FILESYSTEM_ALL
[59673224]	264	#define CONFIGURE_FILESYSTEM_MINIIMFS
[29e92b0]	265	#define CONFIGURE_FILESYSTEM_IMFS
	266	#define CONFIGURE_FILESYSTEM_DEVFS
	267	#define CONFIGURE_FILESYSTEM_TFTPFS
	268	#define CONFIGURE_FILESYSTEM_FTPFS
[59673224]	269	#define CONFIGURE_FILESYSTEM_NFS
[29e92b0]	270	#define CONFIGURE_FILESYSTEM_DOSFS
	271	#define CONFIGURE_FILESYSTEM_RFS
[3c96bee]	272	#define CONFIGURE_FILESYSTEM_JFFS2
[29e92b0]	273	#endif
	274
	275	/*
[80c1577]	276	* If disabling the file system, give a compile error if the user has
	277	* configured other filesystem parameters.
[29e92b0]	278	*/
[80c1577]	279	#if defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM)
	280	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM) \|\| \
	281	defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM)
	282	#error "Filesystem disabled but a base filesystem configured."
	283	#endif
	284
	285	#if defined(CONFIGURE_FILESYSTEM_MINIIMFS) \|\| \
	286	defined(CONFIGURE_FILESYSTEM_IMFS) \|\| \
	287	defined(CONFIGURE_FILESYSTEM_DEVFS) \|\| \
	288	defined(CONFIGURE_FILESYSTEM_TFTPFS) \|\| \
	289	defined(CONFIGURE_FILESYSTEM_FTPFS) \|\| \
	290	defined(CONFIGURE_FILESYSTEM_NFS) \|\| \
	291	defined(CONFIGURE_FILESYSTEM_DOSFS) \|\| \
[3c96bee]	292	defined(CONFIGURE_FILESYSTEM_RFS) \|\| \
	293	defined(CONFIGURE_FILESYSTEM_JFFS2)
[9bd0258d]	294	#error "Configured filesystems but root filesystem was not IMFS!"
	295	#error "Filesystems could be disabled, DEVFS is root, or"
[80c1577]	296	#error " miniIMFS is root!"
[9ab091e]	297	#endif
[29e92b0]	298	#endif
	299
	300	/*
	301	* If the base filesystem is DEVFS define it else define IMFS.
	302	* We will have either DEVFS or IMFS defined after this.
	303	*/
[f89c34bb]	304	#if !defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM)
	305	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
	306	#define CONFIGURE_FILESYSTEM_DEVFS
	307	#elif defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM)
[59673224]	308	#define CONFIGURE_FILESYSTEM_MINIIMFS
[f89c34bb]	309	#elif !defined(CONFIGURE_FILESYSTEM_IMFS)
	310	#define CONFIGURE_FILESYSTEM_IMFS
	311	#endif
[29e92b0]	312	#endif
	313
	314	#endif
	315
[5aecf664]	316	#ifndef RTEMS_SCHEDSIM
[29e92b0]	317	/**
	318	* IMFS
	319	*/
	320	#include <rtems/imfs.h>
	321
	322	/**
[27f071cd]	323	* This specifies the number of bytes per block for files within the IMFS.
	324	* There are a maximum number of blocks per file so this dictates the maximum
	325	* size of a file. This has to be balanced with the unused portion of each
	326	* block that might be wasted.
[29e92b0]	327	*/
	328	#ifndef CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK
	329	#define CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK \
	330	IMFS_MEMFILE_DEFAULT_BYTES_PER_BLOCK
	331	#endif
	332
	333	/**
[27f071cd]	334	* This defines the miniIMFS file system table entry.
[9ab091e]	335	*/
[29e92b0]	336	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_miniIMFS) && \
[59673224]	337	defined(CONFIGURE_FILESYSTEM_MINIIMFS)
[14fc3a77]	338	#define CONFIGURE_FILESYSTEM_ENTRY_miniIMFS \
	339	{ RTEMS_FILESYSTEM_TYPE_MINIIMFS, miniIMFS_initialize }
[29e92b0]	340	#endif
[5aecf664]	341	#endif
[29e92b0]	342
[659019e]	343	/**
[27f071cd]	344	* Internall it is called FIFOs not pipes
[659019e]	345	*/
	346	#if defined(CONFIGURE_PIPES_ENABLED)
	347	#define CONFIGURE_FIFOS_ENABLED
	348	#endif
	349
[5aecf664]	350	#ifndef RTEMS_SCHEDSIM
[29e92b0]	351	/**
[27f071cd]	352	* This defines the IMFS file system table entry.
[9ab091e]	353	*/
[29e92b0]	354	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS) && \
	355	defined(CONFIGURE_FILESYSTEM_IMFS)
[659019e]	356	#if defined(CONFIGURE_FIFOS_ENABLED)
[14fc3a77]	357	#define CONFIGURE_FILESYSTEM_ENTRY_IMFS \
	358	{ RTEMS_FILESYSTEM_TYPE_IMFS, fifoIMFS_initialize }
[241f4c96]	359	#else
[14fc3a77]	360	#define CONFIGURE_FILESYSTEM_ENTRY_IMFS \
	361	{ RTEMS_FILESYSTEM_TYPE_IMFS, IMFS_initialize }
[241f4c96]	362	#endif
[29e92b0]	363	#endif
[5aecf664]	364	#endif
[29e92b0]	365
[659019e]	366	/**
[27f071cd]	367	* This sets up the resources for the PIPES/FIFOs
[659019e]	368	*/
	369	#if defined(CONFIGURE_FIFOS_ENABLED)
[46e69ff]	370	#if !defined(CONFIGURE_MAXIMUM_FIFOS) && !defined(CONFIGURE_MAXIMUM_PIPES)
	371	#error "No FIFOs or PIPES configured"
	372	#endif
[659019e]	373	#if !defined(CONFIGURE_MAXIMUM_FIFOS)
[46e69ff]	374	#define CONFIGURE_MAXIMUM_FIFOS 0
	375	#endif
	376	#if !defined(CONFIGURE_MAXIMUM_PIPES)
	377	#define CONFIGURE_MAXIMUM_PIPES 0
[659019e]	378	#endif
[46e69ff]	379	#define CONFIGURE_BARRIERS_FOR_FIFOS \
	380	(2 * (CONFIGURE_MAXIMUM_FIFOS + CONFIGURE_MAXIMUM_PIPES))
	381	#define CONFIGURE_SEMAPHORES_FOR_FIFOS \
	382	(1 + (CONFIGURE_MAXIMUM_FIFOS + CONFIGURE_MAXIMUM_PIPES))
[659019e]	383	#else
	384	#define CONFIGURE_BARRIERS_FOR_FIFOS 0
	385	#define CONFIGURE_SEMAPHORES_FOR_FIFOS 0
	386	#endif
	387
[29e92b0]	388	/**
	389	* DEVFS
[9ab091e]	390	*/
[29e92b0]	391	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS) && \
	392	defined(CONFIGURE_FILESYSTEM_DEVFS)
	393	#include <rtems/devfs.h>
[14fc3a77]	394	#define CONFIGURE_FILESYSTEM_ENTRY_DEVFS \
	395	{ RTEMS_FILESYSTEM_TYPE_DEVFS, devFS_initialize }
[29e92b0]	396	#endif
	397
	398	#ifdef RTEMS_NETWORKING
	399	/**
	400	* FTPFS
[9ab091e]	401	*/
[29e92b0]	402	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS) && \
[9ab091e]	403	defined(CONFIGURE_FILESYSTEM_FTPFS)
[29e92b0]	404	#include <rtems/ftpfs.h>
[14fc3a77]	405	#define CONFIGURE_FILESYSTEM_ENTRY_FTPFS \
	406	{ RTEMS_FILESYSTEM_TYPE_FTPFS, rtems_ftpfs_initialize }
[29e92b0]	407	#endif
	408
	409	/**
	410	* TFTPFS
[9ab091e]	411	*/
[29e92b0]	412	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS) && \
	413	defined(CONFIGURE_FILESYSTEM_TFTPFS)
	414	#include <rtems/tftp.h>
[14fc3a77]	415	#define CONFIGURE_FILESYSTEM_ENTRY_TFTPFS \
	416	{ RTEMS_FILESYSTEM_TYPE_TFTPFS, rtems_tftpfs_initialize }
[29e92b0]	417	#endif
	418
	419	/**
[59673224]	420	* NFS
[9ab091e]	421	*/
[59673224]	422	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_NFS) && \
	423	defined(CONFIGURE_FILESYSTEM_NFS)
[29e92b0]	424	#include <librtemsNfs.h>
[c9a0a10]	425	#if !defined(CONFIGURE_MAXIMUM_NFS_MOUNTS)
	426	#define CONFIGURE_MAXIMUM_NFS_MOUNTS 1
	427	#endif
[59673224]	428	#define CONFIGURE_FILESYSTEM_ENTRY_NFS \
	429	{ RTEMS_FILESYSTEM_TYPE_NFS, rtems_nfs_initialize }
[c9a0a10]	430	#define CONFIGURE_SEMAPHORES_FOR_NFS ((CONFIGURE_MAXIMUM_NFS_MOUNTS * 2) + 1)
	431	#else
	432	#define CONFIGURE_SEMAPHORES_FOR_NFS 0
[29e92b0]	433	#endif
[e306f3df]	434	#else
	435	#define CONFIGURE_SEMAPHORES_FOR_NFS 0
[29e92b0]	436	#endif
	437
	438	/**
	439	* DOSFS
[9ab091e]	440	*/
[29e92b0]	441	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS) && \
	442	defined(CONFIGURE_FILESYSTEM_DOSFS)
	443	#include <rtems/dosfs.h>
[c9a0a10]	444	#if !defined(CONFIGURE_MAXIMUM_DOSFS_MOUNTS)
	445	#define CONFIGURE_MAXIMUM_DOSFS_MOUNTS 1
	446	#endif
[14fc3a77]	447	#define CONFIGURE_FILESYSTEM_ENTRY_DOSFS \
	448	{ RTEMS_FILESYSTEM_TYPE_DOSFS, rtems_dosfs_initialize }
[c9a0a10]	449	#define CONFIGURE_SEMAPHORES_FOR_DOSFS CONFIGURE_MAXIMUM_DOSFS_MOUNTS
	450	#else
	451	#define CONFIGURE_SEMAPHORES_FOR_DOSFS 0
[29e92b0]	452	#endif
	453
	454	/**
	455	* RFS
[9ab091e]	456	*/
[29e92b0]	457	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_RFS) && \
	458	defined(CONFIGURE_FILESYSTEM_RFS)
	459	#include <rtems/rtems-rfs.h>
[c9a0a10]	460	#if !defined(CONFIGURE_MAXIMUM_RFS_MOUNTS)
	461	#define CONFIGURE_MAXIMUM_RFS_MOUNTS 1
	462	#endif
[14fc3a77]	463	#define CONFIGURE_FILESYSTEM_ENTRY_RFS \
	464	{ RTEMS_FILESYSTEM_TYPE_RFS, rtems_rfs_rtems_initialise }
[c9a0a10]	465	#define CONFIGURE_SEMAPHORES_FOR_RFS CONFIGURE_MAXIMUM_RFS_MOUNTS
	466	#else
	467	#define CONFIGURE_SEMAPHORES_FOR_RFS 0
[29e92b0]	468	#endif
	469
[3c96bee]	470	/**
	471	* JFFS2
	472	*/
	473	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_JFFS2) && \
	474	defined(CONFIGURE_FILESYSTEM_JFFS2)
	475	#include <rtems/jffs2.h>
[c9a0a10]	476	#if !defined(CONFIGURE_MAXIMUM_JFFS2_MOUNTS)
	477	#define CONFIGURE_MAXIMUM_JFFS2_MOUNTS 1
	478	#endif
[3c96bee]	479	#define CONFIGURE_FILESYSTEM_ENTRY_JFFS2 \
	480	{ RTEMS_FILESYSTEM_TYPE_JFFS2, rtems_jffs2_initialize }
[c9a0a10]	481	#define CONFIGURE_SEMAPHORES_FOR_JFFS2 CONFIGURE_MAXIMUM_JFFS2_MOUNTS
	482	#else
	483	#define CONFIGURE_SEMAPHORES_FOR_JFFS2 0
[3c96bee]	484	#endif
	485
[c9a0a10]	486	#define CONFIGURE_SEMAPHORES_FOR_FILE_SYSTEMS (CONFIGURE_SEMAPHORES_FOR_FIFOS + \
	487	CONFIGURE_SEMAPHORES_FOR_NFS + \
	488	CONFIGURE_SEMAPHORES_FOR_DOSFS + \
	489	CONFIGURE_SEMAPHORES_FOR_RFS + \
	490	CONFIGURE_SEMAPHORES_FOR_JFFS2)
	491
[29e92b0]	492	#ifdef CONFIGURE_INIT
	493
[84e1742]	494	/**
[27f071cd]	495	* DEVFS variables.
[84e1742]	496	*
[27f071cd]	497	* The number of individual devices that may be registered
	498	* in the system or the CONFIGURE_MAXIMUM_DEVICES variable
	499	* is defaulted to 4 when a filesystem is enabled, unless
	500	* the bsp overwrides this. In which case the value is set
	501	* to BSP_MAXIMUM_DEVICES.
[29e92b0]	502	*/
[3b7c123]	503	#ifdef CONFIGURE_FILESYSTEM_DEVFS
[d40da79b]	504	#ifndef CONFIGURE_MAXIMUM_DEVICES
[84e1742]	505	#if defined(BSP_MAXIMUM_DEVICES)
	506	#define CONFIGURE_MAXIMUM_DEVICES BSP_MAXIMUM_DEVICES
	507	#else
	508	#define CONFIGURE_MAXIMUM_DEVICES 4
	509	#endif
[d40da79b]	510	#endif
	511	#include <rtems/devfs.h>
	512	#endif
	513
[5aecf664]	514	#ifndef RTEMS_SCHEDSIM
[dfce6724]	515	#if defined(CONFIGURE_FILESYSTEM_IMFS) \|\| \
[59673224]	516	defined(CONFIGURE_FILESYSTEM_MINIIMFS)
[dfce6724]	517	int imfs_rq_memfile_bytes_per_block = CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK;
	518	#endif
[5aecf664]	519	#endif
[dfce6724]	520
[29e92b0]	521	/**
	522	* Table termination record.
	523	*/
	524	#define CONFIGURE_FILESYSTEM_NULL { NULL, NULL }
[43f7a90]	525
[5aecf664]	526	#ifndef RTEMS_SCHEDSIM
[29e92b0]	527	/**
	528	* The default file system table. Must be terminated with the NULL entry if
	529	* you provide your own.
	530	*/
	531	#ifndef CONFIGURE_HAS_OWN_FILESYSTEM_TABLE
[7d01d244]	532	const rtems_filesystem_table_t rtems_filesystem_table[] = {
[59673224]	533	#if defined(CONFIGURE_FILESYSTEM_MINIIMFS) && \
[29e92b0]	534	defined(CONFIGURE_FILESYSTEM_ENTRY_miniIMFS)
	535	CONFIGURE_FILESYSTEM_ENTRY_miniIMFS,
	536	#endif
	537	#if defined(CONFIGURE_FILESYSTEM_IMFS) && \
	538	defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS)
	539	CONFIGURE_FILESYSTEM_ENTRY_IMFS,
	540	#endif
	541	#if defined(CONFIGURE_FILESYSTEM_DEVFS) && \
	542	defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS)
	543	CONFIGURE_FILESYSTEM_ENTRY_DEVFS,
	544	#endif
	545	#if defined(CONFIGURE_FILESYSTEM_TFTPFS) && \
	546	defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS)
	547	CONFIGURE_FILESYSTEM_ENTRY_TFTPFS,
	548	#endif
	549	#if defined(CONFIGURE_FILESYSTEM_FTPFS) && \
	550	defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS)
	551	CONFIGURE_FILESYSTEM_ENTRY_FTPFS,
	552	#endif
[59673224]	553	#if defined(CONFIGURE_FILESYSTEM_NFS) && \
	554	defined(CONFIGURE_FILESYSTEM_ENTRY_NFS)
	555	CONFIGURE_FILESYSTEM_ENTRY_NFS,
[29e92b0]	556	#endif
	557	#if defined(CONFIGURE_FILESYSTEM_DOSFS) && \
	558	defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS)
	559	CONFIGURE_FILESYSTEM_ENTRY_DOSFS,
	560	#endif
	561	#if defined(CONFIGURE_FILESYSTEM_RFS) && \
	562	defined(CONFIGURE_FILESYSTEM_ENTRY_RFS)
	563	CONFIGURE_FILESYSTEM_ENTRY_RFS,
	564	#endif
[3c96bee]	565	#if defined(CONFIGURE_FILESYSTEM_JFFS2) && \
	566	defined(CONFIGURE_FILESYSTEM_ENTRY_JFFS2)
	567	CONFIGURE_FILESYSTEM_ENTRY_JFFS2,
	568	#endif
[29e92b0]	569	CONFIGURE_FILESYSTEM_NULL
	570	};
	571	#endif
[43f7a90]	572
[c3db01d0]	573	#ifndef CONFIGURE_HAS_OWN_MOUNT_TABLE
[3b7c123]	574	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
	575	static devFS_node devFS_root_filesystem_nodes [CONFIGURE_MAXIMUM_DEVICES];
	576	static const devFS_data devFS_root_filesystem_data = {
	577	devFS_root_filesystem_nodes,
	578	CONFIGURE_MAXIMUM_DEVICES
	579	};
	580	#endif
	581	const rtems_filesystem_mount_configuration
	582	rtems_filesystem_root_configuration = {
	583	NULL,
	584	NULL,
[46969df]	585	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
[14fc3a77]	586	RTEMS_FILESYSTEM_TYPE_DEVFS,
[46969df]	587	#elif defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM)
[14fc3a77]	588	RTEMS_FILESYSTEM_TYPE_MINIIMFS,
[3b7c123]	589	#else
[14fc3a77]	590	RTEMS_FILESYSTEM_TYPE_IMFS,
[c3db01d0]	591	#endif
	592	RTEMS_FILESYSTEM_READ_WRITE,
[3b7c123]	593	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
	594	&devFS_root_filesystem_data
	595	#else
	596	NULL
	597	#endif
[c3db01d0]	598	};
	599	#endif
[29e92b0]	600
[43f7a90]	601	#endif
[5aecf664]	602	#endif
[43f7a90]	603
[4afd6f4]	604	/*
[b2b56cb9]	605	* STACK_CHECKER_ON was still available in 4.9 so give a warning for now.
[4afd6f4]	606	*/
	607	#if defined(STACK_CHECKER_ON)
	608	#define CONFIGURE_STACK_CHECKER_ENABLED
	609	#warning "STACK_CHECKER_ON deprecated -- use CONFIGURE_STACK_CHECKER_ENABLED"
	610	#endif
[28352fae]	611
[5877cc3a]	612	/**
[27f071cd]	613	* This configures the stack checker user extension.
[ab97da95]	614	*/
[4afd6f4]	615	#ifdef CONFIGURE_STACK_CHECKER_ENABLED
[5877cc3a]	616	#define CONFIGURE_STACK_CHECKER_EXTENSION 1
[ab97da95]	617	#else
[5877cc3a]	618	#define CONFIGURE_STACK_CHECKER_EXTENSION 0
[ab97da95]	619	#endif
	620
[80f9d77]	621	/**
[27f071cd]	622	* @brief Maximum priority configuration.
[80f9d77]	623	*
[27f071cd]	624	* This configures the maximum priority value that
	625	* a task may have.
[80f9d77]	626	*
[27f071cd]	627	* The following applies to the data space requirements
	628	* of the Priority Scheduler.
[010192d]	629	*
[27f071cd]	630	* By reducing the number of priorities in a system,
	631	* the amount of RAM required by RTEMS can be significantly
	632	* reduced. RTEMS allocates a Chain_Control structure per
	633	* priority and this structure contains 3 pointers. So
	634	* the default is (256 * 12) = 3K on 32-bit architectures.
[80f9d77]	635	*
[27f071cd]	636	* This must be one less than a power of 2 between
	637	* 4 and 256. Valid values along with the application
	638	* priority levels and memory saved when pointers are
	639	* 32-bits in size are:
[80f9d77]	640	*
[27f071cd]	641	* + 3, 2 application priorities, 3024 bytes saved
	642	* + 7, 5 application priorities, 2976 bytes saved
	643	* + 15, 13 application priorities, 2880 bytes saved
	644	* + 31, 29 application priorities, 2688 bytes saved
	645	* + 63, 61 application priorities, 2304 bytes saved
	646	* + 127, 125 application priorities, 1536 bytes saved
	647	* + 255, 253 application priorities, 0 bytes saved
[80f9d77]	648	*
[27f071cd]	649	* It is specified in terms of Classic API priority values.
[80f9d77]	650	*/
	651	#ifndef CONFIGURE_MAXIMUM_PRIORITY
[8f25cec]	652	#define CONFIGURE_MAXIMUM_PRIORITY PRIORITY_DEFAULT_MAXIMUM
[80f9d77]	653	#endif
	654
[0faa9dad]	655	/*
	656	* Scheduler configuration.
	657	*
[9ab091e]	658	* The scheduler configuration allows an application to select the
[0faa9dad]	659	* scheduling policy to use. The supported configurations are:
[ba7bc099]	660	* CONFIGURE_SCHEDULER_USER - user provided scheduler
	661	* CONFIGURE_SCHEDULER_PRIORITY - Deterministic Priority Scheduler
[99b3505]	662	* CONFIGURE_SCHEDULER_PRIORITY_SMP - Deterministic Priority SMP Scheduler
[6d24e8b]	663	* CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP - Deterministic Priority SMP Affinity Scheduler
[ba7bc099]	664	* CONFIGURE_SCHEDULER_SIMPLE - Light-weight Priority Scheduler
	665	* CONFIGURE_SCHEDULER_SIMPLE_SMP - Simple SMP Priority Scheduler
[5472ad41]	666	* CONFIGURE_SCHEDULER_EDF - EDF Scheduler
[82db8e56]	667	* CONFIGURE_SCHEDULER_CBS - CBS Scheduler
[9ab091e]	668	*
	669	* If no configuration is specified by the application, then
[0faa9dad]	670	* CONFIGURE_SCHEDULER_PRIORITY is assumed to be the default.
	671	*
	672	* An application can define its own scheduling policy by defining
[010192d]	673	* CONFIGURE_SCHEDULER_USER and the following:
[e1598a6]	674	* - CONFIGURE_SCHEDULER_CONTEXT
	675	* - CONFIGURE_SCHEDULER_CONTROLS
[69aa3349]	676	* - CONFIGURE_SCHEDULER_USER_PER_THREAD
[0faa9dad]	677	*/
[ba7bc099]	678
[0faa9dad]	679	/* If no scheduler is specified, the priority scheduler is default. */
	680	#if !defined(CONFIGURE_SCHEDULER_USER) && \
[0118ed6]	681	!defined(CONFIGURE_SCHEDULER_PRIORITY) && \
[99b3505]	682	!defined(CONFIGURE_SCHEDULER_PRIORITY_SMP) && \
[6d24e8b]	683	!defined(CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP) && \
[ba7bc099]	684	!defined(CONFIGURE_SCHEDULER_SIMPLE) && \
[5472ad41]	685	!defined(CONFIGURE_SCHEDULER_SIMPLE_SMP) && \
[82db8e56]	686	!defined(CONFIGURE_SCHEDULER_EDF) && \
	687	!defined(CONFIGURE_SCHEDULER_CBS)
[ba7bc099]	688	#if defined(RTEMS_SMP) && defined(CONFIGURE_SMP_APPLICATION)
[99b3505]	689	#define CONFIGURE_SCHEDULER_PRIORITY_SMP
[ba7bc099]	690	#else
	691	#define CONFIGURE_SCHEDULER_PRIORITY
	692	#endif
[0faa9dad]	693	#endif
	694
[e1598a6]	695	#include <rtems/scheduler.h>
	696
[9ab091e]	697	/*
[4c794c8]	698	* If the Priority Scheduler is selected, then configure for it.
[0faa9dad]	699	*/
	700	#if defined(CONFIGURE_SCHEDULER_PRIORITY)
[133d54c5]	701	#if !defined(CONFIGURE_SCHEDULER_NAME)
	702	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'P', 'D', ' ')
	703	#endif
	704
[e1598a6]	705	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	706	#define CONFIGURE_SCHEDULER_CONTEXT \
	707	RTEMS_SCHEDULER_CONTEXT_PRIORITY( \
	708	dflt, \
	709	CONFIGURE_MAXIMUM_PRIORITY + 1 \
	710	)
	711
	712	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	713	RTEMS_SCHEDULER_CONTROL_PRIORITY(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	714	#endif
[0faa9dad]	715	#endif
	716
[99b3505]	717	/*
	718	* If the Deterministic Priority SMP Scheduler is selected, then configure for
	719	* it.
	720	*/
	721	#if defined(CONFIGURE_SCHEDULER_PRIORITY_SMP)
[133d54c5]	722	#if !defined(CONFIGURE_SCHEDULER_NAME)
	723	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'D', ' ')
	724	#endif
	725
[e1598a6]	726	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	727	#define CONFIGURE_SCHEDULER_CONTEXT \
	728	RTEMS_SCHEDULER_CONTEXT_PRIORITY_SMP( \
	729	dflt, \
	730	CONFIGURE_MAXIMUM_PRIORITY + 1 \
	731	)
	732
	733	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	734	RTEMS_SCHEDULER_CONTROL_PRIORITY_SMP(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	735	#endif
[99b3505]	736	#endif
	737
[6d24e8b]	738	/*
	739	* If the Deterministic Priority Affinity SMP Scheduler is selected, then configure for
	740	* it.
	741	*/
	742	#if defined(CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP)
[133d54c5]	743	#if !defined(CONFIGURE_SCHEDULER_NAME)
	744	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'A', ' ')
	745	#endif
	746
[e1598a6]	747	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	748	#define CONFIGURE_SCHEDULER_CONTEXT \
	749	RTEMS_SCHEDULER_CONTEXT_PRIORITY_AFFINITY_SMP( \
	750	dflt, \
	751	CONFIGURE_MAXIMUM_PRIORITY + 1 \
	752	)
	753
	754	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	755	RTEMS_SCHEDULER_CONTROL_PRIORITY_AFFINITY_SMP( \
	756	dflt, \
	757	CONFIGURE_SCHEDULER_NAME \
	758	)
[e1598a6]	759	#endif
[6d24e8b]	760	#endif
	761
[9ab091e]	762	/*
[0118ed6]	763	* If the Simple Priority Scheduler is selected, then configure for it.
	764	*/
	765	#if defined(CONFIGURE_SCHEDULER_SIMPLE)
[133d54c5]	766	#if !defined(CONFIGURE_SCHEDULER_NAME)
	767	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'P', 'S', ' ')
	768	#endif
	769
[e1598a6]	770	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	771	#define CONFIGURE_SCHEDULER_CONTEXT RTEMS_SCHEDULER_CONTEXT_SIMPLE(dflt)
	772
[133d54c5]	773	#define CONFIGURE_SCHEDULER_CONTROLS \
	774	RTEMS_SCHEDULER_CONTROL_SIMPLE(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	775	#endif
[0118ed6]	776	#endif
	777
[ba7bc099]	778	/*
	779	* If the Simple SMP Priority Scheduler is selected, then configure for it.
	780	*/
	781	#if defined(CONFIGURE_SCHEDULER_SIMPLE_SMP)
[133d54c5]	782	#if !defined(CONFIGURE_SCHEDULER_NAME)
	783	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'S', ' ')
	784	#endif
	785
[e1598a6]	786	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	787	#define CONFIGURE_SCHEDULER_CONTEXT \
	788	RTEMS_SCHEDULER_CONTEXT_SIMPLE_SMP(dflt)
	789
	790	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	791	RTEMS_SCHEDULER_CONTROL_SIMPLE_SMP(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	792	#endif
[ba7bc099]	793	#endif
	794
[5472ad41]	795	/*
	796	* If the EDF Scheduler is selected, then configure for it.
	797	*/
	798	#if defined(CONFIGURE_SCHEDULER_EDF)
[133d54c5]	799	#if !defined(CONFIGURE_SCHEDULER_NAME)
	800	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'E', 'D', 'F')
	801	#endif
	802
[e1598a6]	803	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	804	#define CONFIGURE_SCHEDULER_CONTEXT RTEMS_SCHEDULER_CONTEXT_EDF(dflt)
	805
[133d54c5]	806	#define CONFIGURE_SCHEDULER_CONTROLS \
	807	RTEMS_SCHEDULER_CONTROL_EDF(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	808	#endif
[5472ad41]	809	#endif
	810
[82db8e56]	811	/*
	812	* If the CBS Scheduler is selected, then configure for it.
	813	*/
	814	#if defined(CONFIGURE_SCHEDULER_CBS)
[133d54c5]	815	#if !defined(CONFIGURE_SCHEDULER_NAME)
	816	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'C', 'B', 'S')
	817	#endif
	818
[e1598a6]	819	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	820	#define CONFIGURE_SCHEDULER_CONTEXT RTEMS_SCHEDULER_CONTEXT_CBS(dflt)
	821
[133d54c5]	822	#define CONFIGURE_SCHEDULER_CONTROLS \
	823	RTEMS_SCHEDULER_CONTROL_CBS(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	824	#endif
[82db8e56]	825
	826	#ifndef CONFIGURE_CBS_MAXIMUM_SERVERS
	827	#define CONFIGURE_CBS_MAXIMUM_SERVERS CONFIGURE_MAXIMUM_TASKS
	828	#endif
	829
	830	#ifdef CONFIGURE_INIT
[e1598a6]	831	const uint32_t _Scheduler_CBS_Maximum_servers =
	832	CONFIGURE_CBS_MAXIMUM_SERVERS;
	833
	834	Scheduler_CBS_Server
	835	_Scheduler_CBS_Server_list[ CONFIGURE_CBS_MAXIMUM_SERVERS ];
[82db8e56]	836	#endif
	837	#endif
	838
[9ab091e]	839	/*
[010192d]	840	* Set up the scheduler entry points table. The scheduling code uses
	841	* this code to know which scheduler is configured by the user.
[0faa9dad]	842	*/
	843	#ifdef CONFIGURE_INIT
[133d54c5]	844	#if defined(CONFIGURE_SCHEDULER_CONTEXT)
	845	CONFIGURE_SCHEDULER_CONTEXT;
	846	#endif
[e1598a6]	847
	848	const Scheduler_Control _Scheduler_Table[] = {
	849	CONFIGURE_SCHEDULER_CONTROLS
[0faa9dad]	850	};
[1fac361]	851
[e1598a6]	852	#if defined(RTEMS_SMP)
	853	const size_t _Scheduler_Count =
	854	RTEMS_ARRAY_SIZE( _Scheduler_Table );
[c5831a3f]	855
	856	const Scheduler_Assignment _Scheduler_Assignments[] = {
	857	#if defined(CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS)
	858	CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS
	859	#else
	860	#define CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT \
	861	RTEMS_SCHEDULER_ASSIGN( \
	862	0, \
	863	RTEMS_SCHEDULER_ASSIGN_PROCESSOR_OPTIONAL \
	864	)
	865	CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	866	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 2
	867	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	868	#endif
	869	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 3
	870	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	871	#endif
	872	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 4
	873	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	874	#endif
	875	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 5
	876	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	877	#endif
	878	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 6
	879	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	880	#endif
	881	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 7
	882	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	883	#endif
	884	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 8
	885	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	886	#endif
	887	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 9
	888	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	889	#endif
	890	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 10
	891	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	892	#endif
	893	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 11
	894	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	895	#endif
	896	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 12
	897	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	898	#endif
	899	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 13
	900	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	901	#endif
	902	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 14
	903	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	904	#endif
	905	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 15
	906	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	907	#endif
	908	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 16
	909	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	910	#endif
	911	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 17
	912	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	913	#endif
	914	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 18
	915	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	916	#endif
	917	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 19
	918	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	919	#endif
	920	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 20
	921	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	922	#endif
	923	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 21
	924	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	925	#endif
	926	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 22
	927	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	928	#endif
	929	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 23
	930	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	931	#endif
	932	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 24
	933	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	934	#endif
	935	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 25
	936	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	937	#endif
	938	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 26
	939	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	940	#endif
	941	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 27
	942	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	943	#endif
	944	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 28
	945	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	946	#endif
	947	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 29
	948	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	949	#endif
	950	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 30
	951	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	952	#endif
	953	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 31
	954	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	955	#endif
	956	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 32
	957	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	958	#endif
	959	#undef CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	960	#endif
	961	};
	962
	963	RTEMS_STATIC_ASSERT(
	964	CONFIGURE_SMP_MAXIMUM_PROCESSORS
	965	== RTEMS_ARRAY_SIZE( _Scheduler_Assignments ),
	966	_Scheduler_Assignments
	967	);
[e1598a6]	968	#endif
	969
[1fac361]	970	#if defined(CONFIGURE_SCHEDULER_EDF)
	971	const bool _Scheduler_FIXME_thread_priority_queues_are_broken = true;
	972	#else
	973	const bool _Scheduler_FIXME_thread_priority_queues_are_broken = false;
	974	#endif
[0faa9dad]	975	#endif
	976
[80f9d77]	977	/*
	978	* If you said the IDLE task was going to do application initialization
	979	* and didn't override the IDLE body, then something is amiss.
	980	*/
	981	#if (defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION) && \
	982	!defined(CONFIGURE_IDLE_TASK_BODY))
[805cddc]	983	#error "CONFIGURE_ERROR: You did not override the IDLE task body."
[80f9d77]	984	#endif
	985
[5877cc3a]	986	/**
[27f071cd]	987	* @brief Idle task body configuration.
[976162a6]	988	*
[27f071cd]	989	* There is a default IDLE thread body provided by RTEMS which
	990	* has the possibility of being CPU specific. There may be a
	991	* BSP specific override of the RTEMS default body and in turn,
	992	* the application may override and provide its own.
[976162a6]	993	*/
	994	#ifndef CONFIGURE_IDLE_TASK_BODY
[6c71b25]	995	#if defined(BSP_IDLE_TASK_BODY)
[976162a6]	996	#define CONFIGURE_IDLE_TASK_BODY BSP_IDLE_TASK_BODY
[6c71b25]	997	#elif (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE)
	998	#define CONFIGURE_IDLE_TASK_BODY _CPU_Thread_Idle_body
[976162a6]	999	#else
[93f7ea15]	1000	/* only instantiate and compile if used */
	1001	#ifdef CONFIGURE_INIT
	1002	void *_Thread_Idle_body(uintptr_t ignored)
	1003	{
	1004	for( ; ; ) ;
	1005	return 0; /* to avoid warning */
	1006	}
	1007	#endif
[6c71b25]	1008	#define CONFIGURE_IDLE_TASK_BODY _Thread_Idle_body
[976162a6]	1009	#endif
	1010	#endif
	1011
[ecf0f4c]	1012	/**
[27f071cd]	1013	* By default, use the minimum stack size requested by this port.
[ecf0f4c]	1014	*/
	1015	#ifndef CONFIGURE_MINIMUM_TASK_STACK_SIZE
	1016	#define CONFIGURE_MINIMUM_TASK_STACK_SIZE CPU_STACK_MINIMUM_SIZE
	1017	#endif
	1018
[b4f635e]	1019	#define CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE \
	1020	(2 * CONFIGURE_MINIMUM_TASK_STACK_SIZE)
	1021
[5877cc3a]	1022	/**
[27f071cd]	1023	* @brief Idle task stack size configuration.
[976162a6]	1024	*
[27f071cd]	1025	* By default, the IDLE task will have a stack of minimum size.
	1026	* The BSP or application may override this value.
[976162a6]	1027	*/
	1028	#ifndef CONFIGURE_IDLE_TASK_STACK_SIZE
	1029	#ifdef BSP_IDLE_TASK_STACK_SIZE
	1030	#define CONFIGURE_IDLE_TASK_STACK_SIZE BSP_IDLE_TASK_STACK_SIZE
	1031	#else
[ecf0f4c]	1032	#define CONFIGURE_IDLE_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
[976162a6]	1033	#endif
	1034	#endif
[b4f635e]	1035	#if CONFIGURE_IDLE_TASK_STACK_SIZE < CONFIGURE_MINIMUM_TASK_STACK_SIZE
	1036	#error "CONFIGURE_IDLE_TASK_STACK_SIZE less than CONFIGURE_MINIMUM_TASK_STACK_SIZE"
	1037	#endif
[976162a6]	1038
[5877cc3a]	1039	/**
[27f071cd]	1040	* @brief Interrupt stack size configuration.
[6aa25da]	1041	*
[27f071cd]	1042	* By default, the interrupt stack will be of minimum size.
	1043	* The BSP or application may override this value.
[6aa25da]	1044	*/
	1045	#ifndef CONFIGURE_INTERRUPT_STACK_SIZE
	1046	#ifdef BSP_INTERRUPT_STACK_SIZE
	1047	#define CONFIGURE_INTERRUPT_STACK_SIZE BSP_INTERRUPT_STACK_SIZE
	1048	#else
[ecf0f4c]	1049	#define CONFIGURE_INTERRUPT_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
[6aa25da]	1050	#endif
	1051	#endif
	1052
[5877cc3a]	1053	/**
[27f071cd]	1054	* This reserves memory for the interrupt stack if it is to be allocated
	1055	* by RTEMS rather than the BSP.
[5877cc3a]	1056	*
[27f071cd]	1057	* @todo Try to get to the point where all BSPs support allocating the
	1058	* memory from the Workspace.
[6aa25da]	1059	*/
	1060	#if (CPU_ALLOCATE_INTERRUPT_STACK == 0)
[d875597c]	1061	#define CONFIGURE_INTERRUPT_STACK_MEMORY 0
	1062	#else
[94a88c1c]	1063	#define CONFIGURE_INTERRUPT_STACK_MEMORY \
	1064	_Configure_From_workspace( CONFIGURE_INTERRUPT_STACK_SIZE )
[6aa25da]	1065	#endif
	1066
[5877cc3a]	1067	/**
[27f071cd]	1068	* Configure the very much optional task stack allocator initialization
[976162a6]	1069	*/
[9fa3cf0d]	1070	#ifndef CONFIGURE_TASK_STACK_ALLOCATOR_INIT
	1071	#define CONFIGURE_TASK_STACK_ALLOCATOR_INIT NULL
[976162a6]	1072	#endif
	1073
[9fa3cf0d]	1074	/*
	1075	* Configure the very much optional task stack allocator and deallocator.
[5877cc3a]	1076	*/
[9fa3cf0d]	1077	#if !defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
	1078	&& !defined(CONFIGURE_TASK_STACK_DEALLOCATOR)
	1079	#define CONFIGURE_TASK_STACK_ALLOCATOR _Workspace_Allocate
	1080	#define CONFIGURE_TASK_STACK_DEALLOCATOR _Workspace_Free
	1081	#elif (defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
	1082	&& !defined(CONFIGURE_TASK_STACK_DEALLOCATOR)) \
	1083	\|\| (!defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
	1084	&& defined(CONFIGURE_TASK_STACK_DEALLOCATOR))
	1085	#error "CONFIGURE_TASK_STACK_ALLOCATOR and CONFIGURE_TASK_STACK_DEALLOCATOR must be both defined or both undefined"
[976162a6]	1086	#endif
	1087
[5877cc3a]	1088	/**
[27f071cd]	1089	* Should the RTEMS Workspace and C Program Heap be cleared automatically
	1090	* at system start up?
[976162a6]	1091	*/
	1092	#ifndef CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY
	1093	#ifdef BSP_ZERO_WORKSPACE_AUTOMATICALLY
	1094	#define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY \
	1095	BSP_ZERO_WORKSPACE_AUTOMATICALLY
	1096	#else
	1097	#define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY FALSE
	1098	#endif
	1099	#endif
	1100
[cfcc4e20]	1101	/*
	1102	* RTEMS Malloc configuration
	1103	*/
	1104
	1105	#include <rtems/malloc.h>
	1106
[bd5984de]	1107	#ifdef CONFIGURE_INIT
	1108	/**
[27f071cd]	1109	* By default, RTEMS uses separate heaps for the RTEMS Workspace and
[92b33b8d]	1110	* the C Program Heap. The application can choose optionally to combine
	1111	* these to provide one larger memory pool. This is particularly
[27f071cd]	1112	* useful in combination with the unlimited objects configuration.
[bd5984de]	1113	*/
	1114	#ifdef CONFIGURE_UNIFIED_WORK_AREAS
	1115	Heap_Control *RTEMS_Malloc_Heap = &_Workspace_Area;
	1116	#else
	1117	Heap_Control RTEMS_Malloc_Area;
	1118	Heap_Control *RTEMS_Malloc_Heap = &RTEMS_Malloc_Area;
	1119	#endif
	1120	#endif
	1121
[cfcc4e20]	1122	#ifdef CONFIGURE_INIT
[5877cc3a]	1123	/**
[27f071cd]	1124	* This configures the malloc family statistics to be available.
	1125	* By default only function call counts are kept.
[5877cc3a]	1126	*/
[cfcc4e20]	1127	rtems_malloc_statistics_functions_t *rtems_malloc_statistics_helpers =
	1128	#ifndef CONFIGURE_MALLOC_STATISTICS
	1129	NULL;
	1130	#else
	1131	&rtems_malloc_statistics_helpers_table;
	1132	#endif
	1133	#endif
	1134
	1135	#ifdef CONFIGURE_INIT
[5877cc3a]	1136	/**
[27f071cd]	1137	* This configures the sbrk() support for the malloc family.
	1138	* By default it is assumed that the BSP provides all available
	1139	* RAM to the malloc family implementation so sbrk()'ing to get
	1140	* more memory would always fail anyway.
[5877cc3a]	1141	*/
[47a3cd8]	1142	const rtems_heap_extend_handler rtems_malloc_extend_handler =
	1143	#ifdef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK
	1144	rtems_heap_extend_via_sbrk;
[cfcc4e20]	1145	#else
[47a3cd8]	1146	rtems_heap_null_extend;
[cfcc4e20]	1147	#endif
	1148	#endif
	1149
[bfc54b0]	1150	#ifdef CONFIGURE_INIT
[5877cc3a]	1151	/**
[27f071cd]	1152	* This configures the malloc family plugin which dirties memory
	1153	* allocated. This is helpful for finding unitialized data structure
	1154	* problems.
[5877cc3a]	1155	*/
[0de235f9]	1156	rtems_malloc_dirtier_t rtems_malloc_dirty_helper =
[bfc54b0]	1157	#if defined(CONFIGURE_MALLOC_DIRTY)
	1158	rtems_malloc_dirty_memory;
	1159	#else
	1160	NULL;
	1161	#endif
	1162	#endif
	1163
[6e4c01e]	1164	/**
	1165	* Zero of one returns 0 if the parameter is 0 else 1 is returned.
	1166	*/
	1167	#define _Configure_Zero_or_One(_number) ((_number) ? 1 : 0)
	1168
[fb9e98e]	1169	#define _Configure_Align_up(_val, _align) \
	1170	(((_val) + (_align) - 1) & ~((_align) - 1))
	1171
[5877cc3a]	1172	/**
[27f071cd]	1173	* This is a helper macro used in calculations in this file. It is used
	1174	* to noted when an element is allocated from the RTEMS Workspace and adds
	1175	* a factor to account for heap overhead plus an alignment factor that
	1176	* may be applied.
[5877cc3a]	1177	*/
	1178	#define _Configure_From_workspace(_size) \
[6e4c01e]	1179	(ssize_t) (_Configure_Zero_or_One(_size) * \
[fb9e98e]	1180	_Configure_Align_up((_size) + HEAP_BLOCK_HEADER_SIZE, CPU_HEAP_ALIGNMENT))
[5877cc3a]	1181
[9fa3cf0d]	1182	/**
[27f071cd]	1183	* This is a helper macro used in stack space calculations in this file. It
	1184	* may be provided by the application in case a special task stack allocator
	1185	* is used. The default is allocation from the RTEMS Workspace.
[9fa3cf0d]	1186	*/
	1187	#ifdef CONFIGURE_TASK_STACK_FROM_ALLOCATOR
	1188	#define _Configure_From_stackspace(_stack_size) \
	1189	CONFIGURE_TASK_STACK_FROM_ALLOCATOR(_stack_size)
	1190	#else
	1191	#define _Configure_From_stackspace(_stack_size) \
	1192	_Configure_From_workspace(_stack_size)
	1193	#endif
	1194
[dee98ce]	1195	/**
[27f071cd]	1196	* Do not use the unlimited bit as part of the multiplication
	1197	* for memory usage.
[dee98ce]	1198	*/
	1199	#define _Configure_Max_Objects(_max) \
[6e4c01e]	1200	(_Configure_Zero_or_One(_max) * rtems_resource_maximum_per_allocation(_max))
[dee98ce]	1201
[5877cc3a]	1202	/**
[27f071cd]	1203	* This macro accounts for how memory for a set of configured objects is
	1204	* allocated from the Executive Workspace.
[5877cc3a]	1205	*
[27f071cd]	1206	* NOTE: It does NOT attempt to address the more complex case of unlimited
	1207	* objects.
[5877cc3a]	1208	*/
[fb9e98e]	1209	#define _Configure_Object_RAM(_number, _size) ( \
	1210	_Configure_From_workspace(_Configure_Max_Objects(_number) * (_size)) + \
[5877cc3a]	1211	_Configure_From_workspace( \
[fb9e98e]	1212	_Configure_Zero_or_One(_number) * ( \
	1213	(_Configure_Max_Objects(_number) + 1) * sizeof(Objects_Control *) + \
	1214	_Configure_Align_up(sizeof(void *), CPU_ALIGNMENT) + \
	1215	_Configure_Align_up(sizeof(uint32_t), CPU_ALIGNMENT) \
	1216	) \
[5877cc3a]	1217	) \
	1218	)
	1219
[08bae5e6]	1220	/*
	1221	* Default User Initialization Task Table. This table guarantees that
	1222	* one user initialization table is defined.
	1223	*/
	1224
[be1c11ed]	1225	#ifdef CONFIGURE_RTEMS_INIT_TASKS_TABLE
	1226
	1227	#ifdef CONFIGURE_HAS_OWN_INIT_TASK_TABLE
	1228
	1229	/*
[8486081]	1230	* The user is defining their own table information and setting the
[be1c11ed]	1231	* appropriate variables.
	1232	*/
	1233
	1234	#else
[08bae5e6]	1235
	1236	#ifndef CONFIGURE_INIT_TASK_NAME
[5877cc3a]	1237	#define CONFIGURE_INIT_TASK_NAME rtems_build_name('U', 'I', '1', ' ')
[08bae5e6]	1238	#endif
	1239
	1240	#ifndef CONFIGURE_INIT_TASK_STACK_SIZE
[ecf0f4c]	1241	#define CONFIGURE_INIT_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
[08bae5e6]	1242	#endif
	1243
	1244	#ifndef CONFIGURE_INIT_TASK_PRIORITY
[5877cc3a]	1245	#define CONFIGURE_INIT_TASK_PRIORITY 1
[08bae5e6]	1246	#endif
	1247
	1248	#ifndef CONFIGURE_INIT_TASK_ATTRIBUTES
[5877cc3a]	1249	#define CONFIGURE_INIT_TASK_ATTRIBUTES RTEMS_DEFAULT_ATTRIBUTES
[08bae5e6]	1250	#endif
	1251
	1252	#ifndef CONFIGURE_INIT_TASK_ENTRY_POINT
[d8b74dbe]	1253	#ifdef __cplusplus
	1254	extern "C" {
	1255	#endif
	1256	rtems_task Init (rtems_task_argument );
	1257	#ifdef __cplusplus
	1258	}
	1259	#endif
[5877cc3a]	1260	#define CONFIGURE_INIT_TASK_ENTRY_POINT Init
[d8b74dbe]	1261	extern const char* bsp_boot_cmdline;
	1262	#define CONFIGURE_INIT_TASK_ARGUMENTS ((rtems_task_argument) &bsp_boot_cmdline)
[08bae5e6]	1263	#endif
	1264
	1265	#ifndef CONFIGURE_INIT_TASK_INITIAL_MODES
[05e82bd7]	1266	#if defined(RTEMS_SMP) && defined(CONFIGURE_SMP_APPLICATION)
	1267	#define CONFIGURE_INIT_TASK_INITIAL_MODES RTEMS_DEFAULT_MODES
	1268	#else
	1269	#define CONFIGURE_INIT_TASK_INITIAL_MODES RTEMS_NO_PREEMPT
	1270	#endif
[08bae5e6]	1271	#endif
	1272
	1273	#ifndef CONFIGURE_INIT_TASK_ARGUMENTS
[5877cc3a]	1274	#define CONFIGURE_INIT_TASK_ARGUMENTS 0
[08bae5e6]	1275	#endif
	1276
	1277	#ifdef CONFIGURE_INIT
[5877cc3a]	1278	rtems_initialization_tasks_table Initialization_tasks[] = {
	1279	{ CONFIGURE_INIT_TASK_NAME,
	1280	CONFIGURE_INIT_TASK_STACK_SIZE,
	1281	CONFIGURE_INIT_TASK_PRIORITY,
	1282	CONFIGURE_INIT_TASK_ATTRIBUTES,
	1283	CONFIGURE_INIT_TASK_ENTRY_POINT,
	1284	CONFIGURE_INIT_TASK_INITIAL_MODES,
	1285	CONFIGURE_INIT_TASK_ARGUMENTS
	1286	}
	1287	};
[08bae5e6]	1288	#endif
	1289
[d9a0689e]	1290	#define CONFIGURE_INIT_TASK_TABLE Initialization_tasks
	1291
	1292	#define CONFIGURE_INIT_TASK_TABLE_SIZE \
[9ed2bef]	1293	RTEMS_ARRAY_SIZE(CONFIGURE_INIT_TASK_TABLE)
[d9a0689e]	1294
[be1c11ed]	1295	#endif /* CONFIGURE_HAS_OWN_INIT_TASK_TABLE */
	1296
	1297	#else /* CONFIGURE_RTEMS_INIT_TASKS_TABLE */
	1298
	1299	#define CONFIGURE_INIT_TASK_TABLE NULL
	1300	#define CONFIGURE_INIT_TASK_TABLE_SIZE 0
[45c3da3]	1301	#define CONFIGURE_INIT_TASK_STACK_SIZE 0
[be1c11ed]	1302
[08bae5e6]	1303	#endif
	1304
	1305	/*
	1306	* Default Device Driver Table. Each driver needed by the test is explicitly
	1307	* choosen by that test. There is always a null driver entry.
	1308	*/
	1309
	1310	#define NULL_DRIVER_TABLE_ENTRY \
	1311	{ NULL, NULL, NULL, NULL, NULL, NULL }
	1312
[df49c60]	1313	#ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
[5877cc3a]	1314	#include <rtems/console.h>
[df49c60]	1315	#endif
	1316
	1317	#ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
[5877cc3a]	1318	#include <rtems/clockdrv.h>
[df49c60]	1319	#endif
	1320
	1321	#ifdef CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER
[8fbe2e6]	1322	#include <rtems/btimer.h>
[08bae5e6]	1323	#endif
	1324
[1d4bac9]	1325	#ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER
[5877cc3a]	1326	#include <rtems/rtc.h>
[1d4bac9]	1327	#endif
	1328
[d2018f71]	1329	#ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER
[5877cc3a]	1330	#include <rtems/watchdogdrv.h>
[d2018f71]	1331	#endif
	1332
[ad4759ab]	1333	#ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER
	1334	#include <rtems/framebuffer.h>
	1335	#endif
	1336
[df49c60]	1337	#ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER
[5877cc3a]	1338	#include <rtems/devnull.h>
[08bae5e6]	1339	#endif
	1340
[5af951f]	1341	#ifdef CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER
	1342	#include <rtems/devzero.h>
	1343	#endif
	1344
[c9b005a9]	1345	#ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER
	1346	/* the ide driver needs the ATA driver */
[5877cc3a]	1347	#ifndef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1348	#define CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1349	#endif
	1350	#include <libchip/ide_ctrl.h>
[c9b005a9]	1351	#endif
	1352
	1353	#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
[5877cc3a]	1354	#include <libchip/ata.h>
[c9b005a9]	1355	#endif
	1356
[08bae5e6]	1357	#ifndef CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE
	1358
[263f4bec]	1359	/**
	1360	* This specifies the maximum number of device drivers that
	1361	* can be installed in the system at one time. It must account
	1362	* for both the statically and dynamically installed drivers.
	1363	*/
	1364	#ifndef CONFIGURE_MAXIMUM_DRIVERS
	1365	#define CONFIGURE_MAXIMUM_DRIVERS
	1366	#endif
	1367
[08bae5e6]	1368	#ifdef CONFIGURE_INIT
[263f4bec]	1369	rtems_driver_address_table
	1370	_IO_Driver_address_table[ CONFIGURE_MAXIMUM_DRIVERS ] = {
[09daf222]	1371	#ifdef CONFIGURE_BSP_PREREQUISITE_DRIVERS
	1372	CONFIGURE_BSP_PREREQUISITE_DRIVERS,
	1373	#endif
	1374	#ifdef CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS
	1375	CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS,
	1376	#endif
[5877cc3a]	1377	#ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
	1378	CONSOLE_DRIVER_TABLE_ENTRY,
	1379	#endif
	1380	#ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
	1381	CLOCK_DRIVER_TABLE_ENTRY,
	1382	#endif
	1383	#ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER
	1384	RTC_DRIVER_TABLE_ENTRY,
	1385	#endif
	1386	#ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER
	1387	WATCHDOG_DRIVER_TABLE_ENTRY,
	1388	#endif
	1389	#ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER
	1390	DEVNULL_DRIVER_TABLE_ENTRY,
	1391	#endif
[5af951f]	1392	#ifdef CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER
	1393	DEVZERO_DRIVER_TABLE_ENTRY,
	1394	#endif
[5877cc3a]	1395	#ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER
	1396	IDE_CONTROLLER_DRIVER_TABLE_ENTRY,
	1397	#endif
	1398	#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1399	ATA_DRIVER_TABLE_ENTRY,
	1400	#endif
[ad4759ab]	1401	#ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER
	1402	FRAME_BUFFER_DRIVER_TABLE_ENTRY,
	1403	#endif
[5877cc3a]	1404	#ifdef CONFIGURE_APPLICATION_EXTRA_DRIVERS
	1405	CONFIGURE_APPLICATION_EXTRA_DRIVERS,
	1406	#endif
	1407	#ifdef CONFIGURE_APPLICATION_NEEDS_NULL_DRIVER
	1408	NULL_DRIVER_TABLE_ENTRY
	1409	#elif !defined(CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER) && \
[4175abd]	1410	!defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \
	1411	!defined(CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER) && \
	1412	!defined(CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER) && \
[5af951f]	1413	!defined(CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER) && \
[4175abd]	1414	!defined(CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER) && \
	1415	!defined(CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER) && \
[ad4759ab]	1416	!defined(CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER) && \
[4175abd]	1417	!defined(CONFIGURE_APPLICATION_EXTRA_DRIVERS)
[5877cc3a]	1418	NULL_DRIVER_TABLE_ENTRY
	1419	#endif
	1420	};
[08bae5e6]	1421
[263f4bec]	1422	const size_t _IO_Number_of_drivers =
	1423	RTEMS_ARRAY_SIZE( _IO_Driver_address_table );
[059a3714]	1424	#endif
	1425
[263f4bec]	1426	#endif /* CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE */
[08bae5e6]	1427
[c9b005a9]	1428	#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1429	/*
	1430	* configure the priority of the ATA driver task
	1431	*/
[5877cc3a]	1432	#ifndef CONFIGURE_ATA_DRIVER_TASK_PRIORITY
	1433	#define CONFIGURE_ATA_DRIVER_TASK_PRIORITY ATA_DRIVER_TASK_DEFAULT_PRIORITY
	1434	#endif
	1435	#ifdef CONFIGURE_INIT
[3899a537]	1436	rtems_task_priority rtems_ata_driver_task_priority
[5877cc3a]	1437	= CONFIGURE_ATA_DRIVER_TASK_PRIORITY;
	1438	#endif /* CONFIGURE_INIT */
[c9b005a9]	1439	#endif
	1440
	1441	/*
	1442	* add bdbuf configuration and values for swapout task priority
	1443	*/
	1444	#ifdef CONFIGURE_APPLICATION_NEEDS_LIBBLOCK
[5877cc3a]	1445	#include <rtems/bdbuf.h>
	1446	/*
[3899a537]	1447	* configure the bdbuf cache parameters
[5877cc3a]	1448	*/
[3899a537]	1449	#ifndef CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS
	1450	#define CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS \
	1451	RTEMS_BDBUF_MAX_READ_AHEAD_BLOCKS_DEFAULT
	1452	#endif
	1453	#ifndef CONFIGURE_BDBUF_MAX_WRITE_BLOCKS
	1454	#define CONFIGURE_BDBUF_MAX_WRITE_BLOCKS \
	1455	RTEMS_BDBUF_MAX_WRITE_BLOCKS_DEFAULT
	1456	#endif
[5877cc3a]	1457	#ifndef CONFIGURE_SWAPOUT_TASK_PRIORITY
[3899a537]	1458	#define CONFIGURE_SWAPOUT_TASK_PRIORITY \
	1459	RTEMS_BDBUF_SWAPOUT_TASK_PRIORITY_DEFAULT
	1460	#endif
	1461	#ifndef CONFIGURE_SWAPOUT_SWAP_PERIOD
	1462	#define CONFIGURE_SWAPOUT_SWAP_PERIOD \
	1463	RTEMS_BDBUF_SWAPOUT_TASK_SWAP_PERIOD_DEFAULT
	1464	#endif
	1465	#ifndef CONFIGURE_SWAPOUT_BLOCK_HOLD
	1466	#define CONFIGURE_SWAPOUT_BLOCK_HOLD \
	1467	RTEMS_BDBUF_SWAPOUT_TASK_BLOCK_HOLD_DEFAULT
[5877cc3a]	1468	#endif
[0d15414e]	1469	#ifndef CONFIGURE_SWAPOUT_WORKER_TASKS
	1470	#define CONFIGURE_SWAPOUT_WORKER_TASKS \
	1471	RTEMS_BDBUF_SWAPOUT_WORKER_TASKS_DEFAULT
	1472	#endif
	1473	#ifndef CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY
	1474	#define CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY \
	1475	RTEMS_BDBUF_SWAPOUT_WORKER_TASK_PRIORITY_DEFAULT
	1476	#endif
[b6911069]	1477	#ifndef CONFIGURE_BDBUF_TASK_STACK_SIZE
	1478	#define CONFIGURE_BDBUF_TASK_STACK_SIZE \
	1479	RTEMS_BDBUF_TASK_STACK_SIZE_DEFAULT
	1480	#endif
[0d15414e]	1481	#ifndef CONFIGURE_BDBUF_CACHE_MEMORY_SIZE
	1482	#define CONFIGURE_BDBUF_CACHE_MEMORY_SIZE \
	1483	RTEMS_BDBUF_CACHE_MEMORY_SIZE_DEFAULT
	1484	#endif
	1485	#ifndef CONFIGURE_BDBUF_BUFFER_MIN_SIZE
	1486	#define CONFIGURE_BDBUF_BUFFER_MIN_SIZE \
	1487	RTEMS_BDBUF_BUFFER_MIN_SIZE_DEFAULT
	1488	#endif
	1489	#ifndef CONFIGURE_BDBUF_BUFFER_MAX_SIZE
	1490	#define CONFIGURE_BDBUF_BUFFER_MAX_SIZE \
	1491	RTEMS_BDBUF_BUFFER_MAX_SIZE_DEFAULT
	1492	#endif
[39ee704e]	1493	#ifndef CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY
	1494	#define CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY \
	1495	RTEMS_BDBUF_READ_AHEAD_TASK_PRIORITY_DEFAULT
	1496	#endif
[5877cc3a]	1497	#ifdef CONFIGURE_INIT
[28352fae]	1498	const rtems_bdbuf_config rtems_bdbuf_configuration = {
[3899a537]	1499	CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS,
	1500	CONFIGURE_BDBUF_MAX_WRITE_BLOCKS,
	1501	CONFIGURE_SWAPOUT_TASK_PRIORITY,
	1502	CONFIGURE_SWAPOUT_SWAP_PERIOD,
[0d15414e]	1503	CONFIGURE_SWAPOUT_BLOCK_HOLD,
	1504	CONFIGURE_SWAPOUT_WORKER_TASKS,
	1505	CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY,
[b6911069]	1506	CONFIGURE_BDBUF_TASK_STACK_SIZE,
[0d15414e]	1507	CONFIGURE_BDBUF_CACHE_MEMORY_SIZE,
	1508	CONFIGURE_BDBUF_BUFFER_MIN_SIZE,
[39ee704e]	1509	CONFIGURE_BDBUF_BUFFER_MAX_SIZE,
	1510	CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY
[3899a537]	1511	};
[5877cc3a]	1512	#endif
[b2f216e1]	1513
[39ee704e]	1514	#define CONFIGURE_LIBBLOCK_TASKS \
	1515	(1 + CONFIGURE_SWAPOUT_WORKER_TASKS + \
	1516	(CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS != 0))
[b6911069]	1517
	1518	#define CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS \
	1519	(CONFIGURE_LIBBLOCK_TASKS * \
	1520	(CONFIGURE_BDBUF_TASK_STACK_SIZE <= CONFIGURE_MINIMUM_TASK_STACK_SIZE ? \
	1521	0 : CONFIGURE_BDBUF_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE))
	1522
[1fc2e960]	1523	#ifdef RTEMS_BDBUF_USE_PTHREAD
	1524	/*
	1525	* Semaphores:
	1526	* o disk lock
	1527	*/
	1528	#define CONFIGURE_LIBBLOCK_SEMAPHORES 1
	1529
	1530	/*
	1531	* POSIX Mutexes:
	1532	* o bdbuf lock
	1533	* o bdbuf sync lock
	1534	*/
	1535	#define CONFIGURE_LIBBLOCK_POSIX_MUTEXES 2
	1536
	1537	/*
	1538	* POSIX Condition Variables:
	1539	* o bdbuf access condition
	1540	* o bdbuf transfer condition
	1541	* o bdbuf buffer condition
	1542	*/
	1543	#define CONFIGURE_LIBBLOCK_POSIX_CONDITION_VARIABLES 3
	1544	#else
	1545	/*
	1546	* Semaphores:
	1547	* o disk lock
	1548	* o bdbuf lock
	1549	* o bdbuf sync lock
	1550	* o bdbuf access condition
	1551	* o bdbuf transfer condition
	1552	* o bdbuf buffer condition
	1553	*/
	1554	#define CONFIGURE_LIBBLOCK_SEMAPHORES 6
	1555
	1556	#define CONFIGURE_LIBBLOCK_POSIX_MUTEXES 0
	1557	#define CONFIGURE_LIBBLOCK_POSIX_CONDITION_VARIABLES 0
	1558	#endif
[b2f216e1]	1559
[0d15414e]	1560	#if defined(CONFIGURE_HAS_OWN_BDBUF_TABLE) \|\| \
	1561	defined(CONFIGURE_BDBUF_BUFFER_SIZE) \|\| \
	1562	defined(CONFIGURE_BDBUF_BUFFER_COUNT)
	1563	#error BDBUF Cache does not use a buffer configuration table. Please remove.
	1564	#endif
[b2f216e1]	1565	#else
[b6911069]	1566	#define CONFIGURE_LIBBLOCK_TASKS 0
	1567	#define CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS 0
[b2f216e1]	1568	#define CONFIGURE_LIBBLOCK_SEMAPHORES 0
[1fc2e960]	1569	#define CONFIGURE_LIBBLOCK_POSIX_MUTEXES 0
	1570	#define CONFIGURE_LIBBLOCK_POSIX_CONDITION_VARIABLES 0
[c9b005a9]	1571	#endif /* CONFIGURE_APPLICATION_NEEDS_LIBBLOCK */
[976162a6]	1572
[b4f635e]	1573	#ifndef CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK
	1574	#define CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK 0
	1575	#endif
	1576
[976162a6]	1577	#if defined(RTEMS_MULTIPROCESSING)
[5877cc3a]	1578	/*
	1579	* Default Multiprocessing Configuration Table. The defaults are
	1580	* appropriate for most of the RTEMS Multiprocessor Test Suite. Each
	1581	* value may be overridden within each test to customize the environment.
	1582	*/
[08bae5e6]	1583
[5877cc3a]	1584	#ifdef CONFIGURE_MP_APPLICATION
[f0f450a]	1585	#define CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 1
	1586
[5877cc3a]	1587	#ifndef CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE
[08bae5e6]	1588
[5877cc3a]	1589	#ifndef CONFIGURE_MP_NODE_NUMBER
	1590	#define CONFIGURE_MP_NODE_NUMBER NODE_NUMBER
	1591	#endif
[08bae5e6]	1592
[5877cc3a]	1593	#ifndef CONFIGURE_MP_MAXIMUM_NODES
[4175abd]	1594	#define CONFIGURE_MP_MAXIMUM_NODES 2
[5877cc3a]	1595	#endif
[08bae5e6]	1596
[5877cc3a]	1597	#ifndef CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS
[4175abd]	1598	#define CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS 32
[5877cc3a]	1599	#endif
[f2a776ac]	1600	#define CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS(_global_objects) \
[4175abd]	1601	_Configure_Object_RAM((_global_objects), sizeof(Objects_MP_Control))
[08bae5e6]	1602
[5877cc3a]	1603	#ifndef CONFIGURE_MP_MAXIMUM_PROXIES
[4175abd]	1604	#define CONFIGURE_MP_MAXIMUM_PROXIES 32
[5877cc3a]	1605	#endif
[f2a776ac]	1606	#define CONFIGURE_MEMORY_FOR_PROXIES(_proxies) \
[4175abd]	1607	_Configure_Object_RAM((_proxies) + 1, sizeof(Thread_Proxy_control) )
[08bae5e6]	1608
[5877cc3a]	1609	#ifndef CONFIGURE_MP_MPCI_TABLE_POINTER
[4175abd]	1610	#include <mpci.h>
	1611	#define CONFIGURE_MP_MPCI_TABLE_POINTER &MPCI_table
[5877cc3a]	1612	#endif
[08bae5e6]	1613
[5877cc3a]	1614	#ifdef CONFIGURE_INIT
[4175abd]	1615	rtems_multiprocessing_table Multiprocessing_configuration = {
	1616	CONFIGURE_MP_NODE_NUMBER, /* local node number */
	1617	CONFIGURE_MP_MAXIMUM_NODES, /* maximum # nodes */
	1618	CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS, /* maximum # global objects */
	1619	CONFIGURE_MP_MAXIMUM_PROXIES, /* maximum # proxies */
	1620	CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK, /* MPCI stack > minimum */
	1621	CONFIGURE_MP_MPCI_TABLE_POINTER /* ptr to MPCI config table */
	1622	};
[5877cc3a]	1623	#endif
[08bae5e6]	1624
[5877cc3a]	1625	#define CONFIGURE_MULTIPROCESSING_TABLE &Multiprocessing_configuration
[08bae5e6]	1626
[5877cc3a]	1627	#endif /* CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE */
[08bae5e6]	1628
[5877cc3a]	1629	#else
[08bae5e6]	1630
[5877cc3a]	1631	#define CONFIGURE_MULTIPROCESSING_TABLE NULL
[08bae5e6]	1632
[5877cc3a]	1633	#endif /* CONFIGURE_MP_APPLICATION */
[976162a6]	1634	#endif /* RTEMS_MULTIPROCESSING */
[8486081]	1635
[913ede4f]	1636	#ifndef CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER
	1637	#define CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 0
	1638	#endif
	1639
	1640
[e53aae2]	1641	/**
	1642	* This macro specifies that the user wants to use unlimited objects for any
	1643	* classic or posix objects that have not already been given resource limits.
	1644	*/
	1645	#if defined(CONFIGURE_UNLIMITED_OBJECTS)
[2c1e7ff]	1646	#if !defined(CONFIGURE_UNIFIED_WORK_AREAS) && \
	1647	!defined(CONFIGURE_EXECUTIVE_RAM_SIZE) && \
	1648	!defined(CONFIGURE_MEMORY_OVERHEAD)
	1649	#error "CONFIGURE_UNLIMITED_OBJECTS requires a unified work area, an executive RAM size, or a defined workspace memory overhead"
	1650	#endif
	1651
[e53aae2]	1652	#if !defined(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1653	/**
	1654	* This macro specifies a default allocation size for when auto-extending
	1655	* unlimited objects if none was given by the user.
	1656	*/
	1657	#define CONFIGURE_UNLIMITED_ALLOCATION_SIZE 8
	1658	#endif
	1659	#if !defined(CONFIGURE_MAXIMUM_TASKS)
	1660	#define CONFIGURE_MAXIMUM_TASKS \
	1661	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1662	#endif
	1663	#if !defined(CONFIGURE_MAXIMUM_TIMERS)
	1664	#define CONFIGURE_MAXIMUM_TIMERS \
	1665	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1666	#endif
	1667	#if !defined(CONFIGURE_MAXIMUM_SEMAPHORES)
	1668	#define CONFIGURE_MAXIMUM_SEMAPHORES \
	1669	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1670	#endif
	1671	#if !defined(CONFIGURE_MAXIMUM_MESSAGE_QUEUES)
	1672	#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES \
	1673	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1674	#endif
	1675	#if !defined(CONFIGURE_MAXIMUM_PARTITIONS)
	1676	#define CONFIGURE_MAXIMUM_PARTITIONS \
	1677	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1678	#endif
	1679	#if !defined(CONFIGURE_MAXIMUM_REGIONS)
	1680	#define CONFIGURE_MAXIMUM_REGIONS \
	1681	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1682	#endif
	1683	#if !defined(CONFIGURE_MAXIMUM_PORTS)
	1684	#define CONFIGURE_MAXIMUM_PORTS \
	1685	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1686	#endif
	1687	#if !defined(CONFIGURE_MAXIMUM_PERIODS)
	1688	#define CONFIGURE_MAXIMUM_PERIODS \
	1689	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1690	#endif
	1691	#if !defined(CONFIGURE_MAXIMUM_BARRIERS)
	1692	#define CONFIGURE_MAXIMUM_BARRIERS \
	1693	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1694	#endif
[0e98970]	1695	#if !defined(CONFIGURE_MAXIMUM_POSIX_KEYS)
	1696	#define CONFIGURE_MAXIMUM_POSIX_KEYS \
	1697	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1698	#endif
	1699	#if !defined(CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS)
	1700	#define CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS \
	1701	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1702	#endif
[e53aae2]	1703
	1704	#ifdef RTEMS_POSIX_API
	1705	#if !defined(CONFIGURE_MAXIMUM_POSIX_THREADS)
	1706	#define CONFIGURE_MAXIMUM_POSIX_THREADS \
	1707	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1708	#endif
	1709	#if !defined(CONFIGURE_MAXIMUM_POSIX_MUTEXES)
	1710	#define CONFIGURE_MAXIMUM_POSIX_MUTEXES \
	1711	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1712	#endif
	1713	#if !defined(CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES)
	1714	#define CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES \
	1715	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1716	#endif
	1717	#if !defined(CONFIGURE_MAXIMUM_POSIX_TIMERS)
	1718	#define CONFIGURE_MAXIMUM_POSIX_TIMERS \
	1719	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1720	#endif
	1721	/*
	1722	#if !defined(CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS)
	1723	#define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS \
	1724	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1725	#endif
	1726	*/
	1727	#if !defined(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES)
	1728	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES \
	1729	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1730	#endif
	1731	#if !defined(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS)
	1732	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS \
	1733	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1734	#endif
	1735	#if !defined(CONFIGURE_MAXIMUM_POSIX_SEMAPHORES)
	1736	#define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES \
	1737	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1738	#endif
	1739	#if !defined(CONFIGURE_MAXIMUM_POSIX_BARRIERS)
	1740	#define CONFIGURE_MAXIMUM_POSIX_BARRIERS \
	1741	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1742	#endif
	1743	#if !defined(CONFIGURE_MAXIMUM_POSIX_RWLOCKS)
	1744	#define CONFIGURE_MAXIMUM_POSIX_RWLOCKS \
	1745	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1746	#endif
	1747	#if !defined(CONFIGURE_MAXIMUM_POSIX_SPINLOCKS)
	1748	#define CONFIGURE_MAXIMUM_POSIX_SPINLOCKS \
	1749	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1750	#endif
	1751	#endif /* RTEMS_POSIX_API */
	1752	#endif /* CONFIGURE_UNLIMITED_OBJECTS */
	1753
	1754
[08bae5e6]	1755	/*
[8486081]	1756	* Default Configuration Table.
[08bae5e6]	1757	*/
	1758
	1759	#ifndef CONFIGURE_HAS_OWN_CONFIGURATION_TABLE
[8486081]	1760
[5877cc3a]	1761	#ifndef CONFIGURE_MAXIMUM_TASKS
	1762	#define CONFIGURE_MAXIMUM_TASKS 0
	1763	#endif
[08bae5e6]	1764
[b6911069]	1765	#define CONFIGURE_TASKS \
	1766	(CONFIGURE_MAXIMUM_TASKS + CONFIGURE_LIBBLOCK_TASKS)
	1767
[4cb19041]	1768	#ifndef CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS
[f2a776ac]	1769	#define CONFIGURE_NOTEPADS_ENABLED TRUE
	1770	#else
[4cb19041]	1771	#define CONFIGURE_NOTEPADS_ENABLED FALSE
[f2a776ac]	1772	#endif
	1773
[d507c037]	1774	/**
	1775	* This macro calculates the memory required for task variables.
	1776	*
	1777	* Each task variable is individually allocated from the Workspace.
	1778	* Hence, we do the multiplication on the configured size.
	1779	*
	1780	* @note Per-task variables are disabled for SMP configurations.
	1781	*/
	1782	#if defined(RTEMS_SMP)
	1783	#ifdef CONFIGURE_MAXIMUM_TASK_VARIABLES
	1784	#error "Per-Task Variables are not safe for SMP systems and disabled"
	1785	#endif
	1786	#define CONFIGURE_MAXIMUM_TASK_VARIABLES 0
	1787	#define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) 0
	1788	#else
[5877cc3a]	1789	#ifndef CONFIGURE_MAXIMUM_TASK_VARIABLES
[f2a776ac]	1790	#define CONFIGURE_MAXIMUM_TASK_VARIABLES 0
	1791	#define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) 0
	1792	#else
	1793	#define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) \
	1794	(_task_variables) * \
	1795	_Configure_From_workspace(sizeof(rtems_task_variable_t))
[5877cc3a]	1796	#endif
[d507c037]	1797	#endif
[08bae5e6]	1798
[5877cc3a]	1799	#ifndef CONFIGURE_MAXIMUM_TIMERS
[f2a776ac]	1800	#define CONFIGURE_MAXIMUM_TIMERS 0
	1801	#define CONFIGURE_MEMORY_FOR_TIMERS(_timers) 0
	1802	#else
	1803	#define CONFIGURE_MEMORY_FOR_TIMERS(_timers) \
	1804	_Configure_Object_RAM(_timers, sizeof(Timer_Control) )
[5877cc3a]	1805	#endif
[08bae5e6]	1806
[5877cc3a]	1807	#ifndef CONFIGURE_MAXIMUM_SEMAPHORES
[f2a776ac]	1808	#define CONFIGURE_MAXIMUM_SEMAPHORES 0
	1809	#endif
	1810
[0c5beb8e]	1811	#ifdef RTEMS_NETWORKING
	1812	#define CONFIGURE_NETWORKING_SEMAPHORES 1
	1813	#else
	1814	#define CONFIGURE_NETWORKING_SEMAPHORES 0
	1815	#endif
	1816
[b2f216e1]	1817	#define CONFIGURE_SEMAPHORES \
	1818	(CONFIGURE_MAXIMUM_SEMAPHORES + CONFIGURE_LIBIO_SEMAPHORES + \
[659019e]	1819	CONFIGURE_TERMIOS_SEMAPHORES + CONFIGURE_LIBBLOCK_SEMAPHORES + \
[0c5beb8e]	1820	CONFIGURE_SEMAPHORES_FOR_FILE_SYSTEMS + \
	1821	CONFIGURE_NETWORKING_SEMAPHORES)
[b2f216e1]	1822
[8fcafdd5]	1823	#if !defined(RTEMS_SMP) \|\| \
	1824	!defined(CONFIGURE_MAXIMUM_MRSP_SEMAPHORES)
	1825	#define CONFIGURE_MEMORY_FOR_MRSP_SEMAPHORES 0
	1826	#else
	1827	#define CONFIGURE_MEMORY_FOR_MRSP_SEMAPHORES \
	1828	CONFIGURE_MAXIMUM_MRSP_SEMAPHORES * \
	1829	_Configure_From_workspace( \
	1830	RTEMS_ARRAY_SIZE(_Scheduler_Table) * sizeof(Priority_Control) \
	1831	)
	1832	#endif
	1833
[f2a776ac]	1834	/*
	1835	* If there are no user or support semaphores defined, then we can assume
	1836	* that no memory need be allocated at all for semaphores.
	1837	*/
[b2f216e1]	1838	#if CONFIGURE_SEMAPHORES == 0
[f2a776ac]	1839	#define CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) 0
	1840	#else
	1841	#define CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) \
[8fcafdd5]	1842	_Configure_Object_RAM(_semaphores, sizeof(Semaphore_Control) ) + \
	1843	CONFIGURE_MEMORY_FOR_MRSP_SEMAPHORES
[5877cc3a]	1844	#endif
[08bae5e6]	1845
[5877cc3a]	1846	#ifndef CONFIGURE_MAXIMUM_MESSAGE_QUEUES
[f2a776ac]	1847	#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES 0
	1848	#define CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) 0
	1849	#else
	1850	#define CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) \
	1851	_Configure_Object_RAM(_queues, sizeof(Message_queue_Control) )
[5877cc3a]	1852	#endif
[08bae5e6]	1853
[5877cc3a]	1854	#ifndef CONFIGURE_MAXIMUM_PARTITIONS
[f2a776ac]	1855	#define CONFIGURE_MAXIMUM_PARTITIONS 0
	1856	#define CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) 0
	1857	#else
	1858	#define CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) \
	1859	_Configure_Object_RAM(_partitions, sizeof(Partition_Control) )
[5877cc3a]	1860	#endif
[08bae5e6]	1861
[5877cc3a]	1862	#ifndef CONFIGURE_MAXIMUM_REGIONS
[f2a776ac]	1863	#define CONFIGURE_MAXIMUM_REGIONS 0
	1864	#define CONFIGURE_MEMORY_FOR_REGIONS(_regions) 0
	1865	#else
	1866	#define CONFIGURE_MEMORY_FOR_REGIONS(_regions) \
	1867	_Configure_Object_RAM(_regions, sizeof(Region_Control) )
[5877cc3a]	1868	#endif
[08bae5e6]	1869
[5877cc3a]	1870	#ifndef CONFIGURE_MAXIMUM_PORTS
[f2a776ac]	1871	#define CONFIGURE_MAXIMUM_PORTS 0
	1872	#define CONFIGURE_MEMORY_FOR_PORTS(_ports) 0
	1873	#else
	1874	#define CONFIGURE_MEMORY_FOR_PORTS(_ports) \
	1875	_Configure_Object_RAM(_ports, sizeof(Dual_ported_memory_Control) )
[5877cc3a]	1876	#endif
[08bae5e6]	1877
[5877cc3a]	1878	#ifndef CONFIGURE_MAXIMUM_PERIODS
[f2a776ac]	1879	#define CONFIGURE_MAXIMUM_PERIODS 0
	1880	#define CONFIGURE_MEMORY_FOR_PERIODS(_periods) 0
	1881	#else
	1882	#define CONFIGURE_MEMORY_FOR_PERIODS(_periods) \
	1883	_Configure_Object_RAM(_periods, sizeof(Rate_monotonic_Control) )
[5877cc3a]	1884	#endif
[7fa1ce86]	1885
[5877cc3a]	1886	#ifndef CONFIGURE_MAXIMUM_BARRIERS
[f2a776ac]	1887	#define CONFIGURE_MAXIMUM_BARRIERS 0
[659019e]	1888	#endif
	1889
	1890	#define CONFIGURE_BARRIERS \
	1891	(CONFIGURE_MAXIMUM_BARRIERS + CONFIGURE_BARRIERS_FOR_FIFOS)
	1892
	1893	#if CONFIGURE_BARRIERS == 0
[f2a776ac]	1894	#define CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) 0
	1895	#else
	1896	#define CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) \
	1897	_Configure_Object_RAM(_barriers, sizeof(Barrier_Control) )
[5877cc3a]	1898	#endif
[08bae5e6]	1899
[5877cc3a]	1900	#ifndef CONFIGURE_MAXIMUM_USER_EXTENSIONS
[f2a776ac]	1901	#define CONFIGURE_MAXIMUM_USER_EXTENSIONS 0
	1902	#define CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) 0
	1903	#else
	1904	#define CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) \
	1905	_Configure_Object_RAM(_extensions, sizeof(Extension_Control) )
[5877cc3a]	1906	#endif
[08bae5e6]	1907
[5877cc3a]	1908	#ifndef CONFIGURE_MICROSECONDS_PER_TICK
	1909	#define CONFIGURE_MICROSECONDS_PER_TICK \
	1910	RTEMS_MILLISECONDS_TO_MICROSECONDS(10)
	1911	#endif
	1912
	1913	#ifndef CONFIGURE_TICKS_PER_TIMESLICE
	1914	#define CONFIGURE_TICKS_PER_TIMESLICE 50
	1915	#endif
[08bae5e6]	1916
[0451b44]	1917	/*
	1918	* Initial Extension Set
	1919	*/
	1920
	1921	#ifdef CONFIGURE_INIT
[4afd6f4]	1922	#ifdef CONFIGURE_STACK_CHECKER_ENABLED
[31bce9b]	1923	#include <rtems/stackchk.h>
[0451b44]	1924	#endif
[c3db01d0]	1925	#include <rtems/libcsupport.h>
[0451b44]	1926
[228df42]	1927	#if defined(BSP_INITIAL_EXTENSION) \|\| \
	1928	defined(CONFIGURE_INITIAL_EXTENSIONS) \|\| \
[4afd6f4]	1929	defined(CONFIGURE_STACK_CHECKER_ENABLED) \|\| \
[c3db01d0]	1930	(defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY))
[2195fd27]	1931	static const rtems_extensions_table Configuration_Initial_Extensions[] = {
[c3db01d0]	1932	#if !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)
	1933	RTEMS_NEWLIB_EXTENSION,
	1934	#endif
[4afd6f4]	1935	#if defined(CONFIGURE_STACK_CHECKER_ENABLED)
[c3db01d0]	1936	RTEMS_STACK_CHECKER_EXTENSION,
	1937	#endif
	1938	#if defined(CONFIGURE_INITIAL_EXTENSIONS)
	1939	CONFIGURE_INITIAL_EXTENSIONS,
	1940	#endif
[228df42]	1941	#if defined(BSP_INITIAL_EXTENSION)
	1942	BSP_INITIAL_EXTENSION
	1943	#endif
[c3db01d0]	1944	};
	1945
	1946	#define CONFIGURE_INITIAL_EXTENSION_TABLE Configuration_Initial_Extensions
	1947	#define CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS \
[9ed2bef]	1948	RTEMS_ARRAY_SIZE(Configuration_Initial_Extensions)
[96e6a86c]	1949	#else
[c3db01d0]	1950	#define CONFIGURE_INITIAL_EXTENSION_TABLE NULL
	1951	#define CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS 0
[96e6a86c]	1952	#endif
	1953
[9c9b62d8]	1954	#if defined(RTEMS_NEWLIB) && defined(__DYNAMIC_REENT__)
	1955	struct _reent *__getreent(void)
	1956	{
	1957	#ifdef CONFIGURE_DISABLE_NEWLIB_REENTRANCY
	1958	return _GLOBAL_REENT;
	1959	#else
	1960	return _Thread_Get_executing()->libc_reent;
	1961	#endif
	1962	}
	1963	#endif
[0451b44]	1964
[08bae5e6]	1965	#endif
	1966
[2eba45d]	1967	/*
	1968	* POSIX API Configuration Parameters
	1969	*/
	1970
[e6c87f7]	1971	/*
	1972	* POSIX Keys are available whether or not the POSIX API is enabled.
	1973	*/
	1974	#include <rtems/posix/key.h>
	1975
	1976	#ifndef CONFIGURE_MAXIMUM_POSIX_KEYS
[5c0c0cf]	1977	#define CONFIGURE_MAXIMUM_POSIX_KEYS 0
	1978	#endif
	1979
	1980	#ifndef CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS
	1981	#define CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS \
	1982	(CONFIGURE_MAXIMUM_POSIX_KEYS * \
	1983	(CONFIGURE_MAXIMUM_POSIX_THREADS + CONFIGURE_MAXIMUM_TASKS))
[e6c87f7]	1984	#endif
[2eba45d]	1985
[5c0c0cf]	1986	#define CONFIGURE_POSIX_KEYS \
	1987	(CONFIGURE_MAXIMUM_POSIX_KEYS + CONFIGURE_LIBIO_POSIX_KEYS)
	1988
[e6c87f7]	1989	#define CONFIGURE_MEMORY_FOR_POSIX_KEYS(_keys, _key_value_pairs) \
	1990	(_Configure_Object_RAM(_keys, sizeof(POSIX_Keys_Control) ) \
	1991	+ _Configure_From_workspace( \
	1992	_key_value_pairs * sizeof(POSIX_Keys_Key_value_pair)))
	1993
	1994	/*
	1995	* The rest of the POSIX threads API features are only available when
	1996	* POSIX is enabled.
	1997	*/
	1998
	1999	#ifdef RTEMS_POSIX_API
[5877cc3a]	2000	#include <sys/types.h>
	2001	#include <signal.h>
	2002	#include <limits.h>
	2003	#include <mqueue.h>
	2004	#include <rtems/posix/barrier.h>
	2005	#include <rtems/posix/cond.h>
	2006	#include <rtems/posix/mqueue.h>
	2007	#include <rtems/posix/mutex.h>
	2008	#include <rtems/posix/psignal.h>
[f9340ed7]	2009	#include <rtems/posix/pthread.h>
[5877cc3a]	2010	#include <rtems/posix/rwlock.h>
	2011	#include <rtems/posix/semaphore.h>
	2012	#include <rtems/posix/spinlock.h>
	2013	#include <rtems/posix/threadsup.h>
	2014	#include <rtems/posix/timer.h>
	2015
[f2a776ac]	2016	/**
[27f071cd]	2017	* Account for the object control structures plus the name
	2018	* of the object to be duplicated.
[f2a776ac]	2019	*/
	2020	#define _Configure_POSIX_Named_Object_RAM(_number, _size) \
	2021	_Configure_Object_RAM( (_number), _size ) + \
[e53aae2]	2022	(_Configure_Max_Objects(_number) * _Configure_From_workspace(NAME_MAX) )
[f2a776ac]	2023
[5877cc3a]	2024	#ifndef CONFIGURE_MAXIMUM_POSIX_THREADS
[6e4c01e]	2025	#define CONFIGURE_MAXIMUM_POSIX_THREADS 0
[5877cc3a]	2026	#endif
[2eba45d]	2027
[5877cc3a]	2028	#ifndef CONFIGURE_MAXIMUM_POSIX_MUTEXES
[6e4c01e]	2029	#define CONFIGURE_MAXIMUM_POSIX_MUTEXES 0
[5877cc3a]	2030	#endif
[6e4c01e]	2031	#define CONFIGURE_MEMORY_FOR_POSIX_MUTEXES(_mutexes) \
	2032	_Configure_Object_RAM(_mutexes, sizeof(POSIX_Mutex_Control) )
[2eba45d]	2033
[5877cc3a]	2034	#ifndef CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES
[6e4c01e]	2035	#define CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES 0
[5877cc3a]	2036	#endif
[6e4c01e]	2037	#define CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES(_condvars) \
	2038	_Configure_Object_RAM(_condvars, \
	2039	sizeof(POSIX_Condition_variables_Control) )
[2eba45d]	2040
[5877cc3a]	2041	#ifndef CONFIGURE_MAXIMUM_POSIX_TIMERS
[6e4c01e]	2042	#define CONFIGURE_MAXIMUM_POSIX_TIMERS 0
[5877cc3a]	2043	#endif
[6e4c01e]	2044	#define CONFIGURE_MEMORY_FOR_POSIX_TIMERS(_timers) \
	2045	_Configure_Object_RAM(_timers, sizeof(POSIX_Timer_Control) )
[0747e2d]	2046
[5877cc3a]	2047	#ifndef CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS
[6e4c01e]	2048	#define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS 0
[5877cc3a]	2049	#endif
[6e4c01e]	2050	#define CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(_queued_signals) \
	2051	_Configure_From_workspace( \
	2052	(_queued_signals) * (sizeof(POSIX_signals_Siginfo_node)) )
[eb0551f]	2053
[5877cc3a]	2054	#ifndef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES
[f2a776ac]	2055	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES 0
[ade17392]	2056	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS 0
[f2a776ac]	2057	#else
[ade17392]	2058	/* default to same number */
	2059	#ifndef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS
	2060	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS \
	2061	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES
	2062	#endif
[5877cc3a]	2063	#endif
[be0fc099]	2064
[6e4c01e]	2065	#define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(_message_queues) \
	2066	_Configure_POSIX_Named_Object_RAM( \
	2067	_message_queues, sizeof(POSIX_Message_queue_Control) )
	2068
	2069	#define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUE_DESCRIPTORS(_mqueue_fds) \
	2070	_Configure_Object_RAM( \
	2071	_mqueue_fds, sizeof(POSIX_Message_queue_Control_fd) )
	2072
[5877cc3a]	2073	#ifndef CONFIGURE_MAXIMUM_POSIX_SEMAPHORES
[6e4c01e]	2074	#define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES 0
[5877cc3a]	2075	#endif
[6e4c01e]	2076	#define CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES(_semaphores) \
	2077	_Configure_POSIX_Named_Object_RAM( \
	2078	_semaphores, sizeof(POSIX_Semaphore_Control) )
[be0fc099]	2079
[5877cc3a]	2080	#ifndef CONFIGURE_MAXIMUM_POSIX_BARRIERS
[6e4c01e]	2081	#define CONFIGURE_MAXIMUM_POSIX_BARRIERS 0
[5877cc3a]	2082	#endif
[6e4c01e]	2083	#define CONFIGURE_MEMORY_FOR_POSIX_BARRIERS(_barriers) \
	2084	_Configure_Object_RAM(_barriers, sizeof(POSIX_Barrier_Control) )
[7fa1ce86]	2085
[5877cc3a]	2086	#ifndef CONFIGURE_MAXIMUM_POSIX_SPINLOCKS
[6e4c01e]	2087	#define CONFIGURE_MAXIMUM_POSIX_SPINLOCKS 0
[5877cc3a]	2088	#endif
[6e4c01e]	2089	#define CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS(_spinlocks) \
	2090	_Configure_Object_RAM(_spinlocks, sizeof(POSIX_Spinlock_Control) )
[7fa1ce86]	2091
[5877cc3a]	2092	#ifndef CONFIGURE_MAXIMUM_POSIX_RWLOCKS
[6e4c01e]	2093	#define CONFIGURE_MAXIMUM_POSIX_RWLOCKS 0
[5877cc3a]	2094	#endif
[6e4c01e]	2095	#define CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS(_rwlocks) \
	2096	_Configure_Object_RAM(_rwlocks, sizeof(POSIX_RWLock_Control) )
[7fa1ce86]	2097
[5877cc3a]	2098	#ifdef CONFIGURE_POSIX_INIT_THREAD_TABLE
[be1c11ed]	2099
[5877cc3a]	2100	#ifdef CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE
[5240c71c]	2101
[5877cc3a]	2102	/*
	2103	* The user is defining their own table information and setting the
	2104	* appropriate variables for the POSIX Initialization Thread Table.
	2105	*/
[8486081]	2106
[5877cc3a]	2107	#else
[be1c11ed]	2108
[5877cc3a]	2109	#ifndef CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT
[4175abd]	2110	#define CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT POSIX_Init
[5877cc3a]	2111	#endif
[5240c71c]	2112
[5877cc3a]	2113	#ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE
[4175abd]	2114	#define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE \
[b4f635e]	2115	CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE
[5877cc3a]	2116	#endif
[adbb578]	2117
[5877cc3a]	2118	#ifdef CONFIGURE_INIT
[4175abd]	2119	posix_initialization_threads_table POSIX_Initialization_threads[] = {
	2120	{ CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT, \
	2121	CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE }
	2122	};
[5877cc3a]	2123	#endif
[2eba45d]	2124
[5877cc3a]	2125	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME \
	2126	POSIX_Initialization_threads
[8486081]	2127
[5877cc3a]	2128	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE \
[9ed2bef]	2129	RTEMS_ARRAY_SIZE(CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME)
[5240c71c]	2130
[5877cc3a]	2131	#endif /* CONFIGURE_POSIX_HAS_OWN_INIT_TASK_TABLE */
[5240c71c]	2132
[5877cc3a]	2133	#else /* CONFIGURE_POSIX_INIT_THREAD_TABLE */
[be1c11ed]	2134
[5877cc3a]	2135	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME NULL
	2136	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE 0
[be1c11ed]	2137
[5877cc3a]	2138	#endif
[be1c11ed]	2139
[5877cc3a]	2140	#else
[352c9b2]	2141
[5877cc3a]	2142	#define CONFIGURE_MAXIMUM_POSIX_THREADS 0
[352c9b2]	2143
[5877cc3a]	2144	#endif /* RTEMS_POSIX_API */
[352c9b2]	2145
[5877cc3a]	2146	#ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE
	2147	#define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE 0
[352c9b2]	2148	#endif
	2149
[5877cc3a]	2150	/*
	2151	* This block of defines are for applications which use GNAT/RTEMS.
	2152	* GNAT implements each Ada task as a POSIX thread.
	2153	*/
	2154	#ifdef CONFIGURE_GNAT_RTEMS
[352c9b2]	2155
[5877cc3a]	2156	/**
[27f071cd]	2157	* The GNAT run-time needs something less than (10) POSIX mutexes.
	2158	* We may be able to get by with less but why bother.
[5877cc3a]	2159	*/
	2160	#define CONFIGURE_GNAT_MUTEXES 10
[352c9b2]	2161
[5877cc3a]	2162	/**
[27f071cd]	2163	* This is the maximum number of Ada tasks which can be concurrently
	2164	* in existence. Twenty (20) are required to run all tests in the
	2165	* ACATS (formerly ACVC).
[5877cc3a]	2166	*/
	2167	#ifndef CONFIGURE_MAXIMUM_ADA_TASKS
	2168	#define CONFIGURE_MAXIMUM_ADA_TASKS 20
	2169	#endif
[352c9b2]	2170
[5877cc3a]	2171	/**
	2172	* This is the number of non-Ada tasks which invoked Ada code.
	2173	*/
	2174	#ifndef CONFIGURE_MAXIMUM_FAKE_ADA_TASKS
	2175	#define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0
	2176	#endif
[352c9b2]	2177
[5877cc3a]	2178	#else
	2179	#define CONFIGURE_GNAT_MUTEXES 0
	2180	#define CONFIGURE_MAXIMUM_ADA_TASKS 0
	2181	#define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0
[352c9b2]	2182	#endif
	2183
[a46e6b6d]	2184	#ifdef CONFIGURE_ENABLE_GO
	2185
	2186	#ifndef CONFIGURE_MAXIMUM_POSIX_THREADS
	2187	#define CONFIGURE_MAXIMUM_POSIX_THREADS 1
	2188	#endif
	2189	#ifndef CONFIGURE_MAXIMUM_POSIX_MUTEXES
	2190	#define CONFIGURE_MAXIMUM_POSIX_MUTEXES 1
	2191	#endif
	2192	#ifndef CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES
	2193	#define CONFIGURE_MAXIMUM_CONDITION_VARIABLES 1
	2194	#endif
	2195
	2196	#define CONFIGURE_GO_INIT_MUTEXES 77
	2197	#define CONFIGURE_GO_INIT_CONDITION_VARIABLES 4
	2198
	2199	#ifndef CONFIGURE_MAXIMUM_GOROUTINES
	2200	#define CONFIGURE_MAXIMUM_GOROUTINES 400
	2201	#endif
	2202
	2203	#define CONFIGURE_GOROUTINES_TASK_VARIABLES \
	2204	(2 * CONFIGURE_MAXIMUM_GOROUTINES)
	2205
	2206	#ifndef CONFIGURE_MAXIMUM_GO_CHANNELS
	2207	#define CONFIGURE_MAXIMUM_GO_CHANNELS 500
	2208	#endif
	2209
	2210	#else
	2211	#define CONFIGURE_GO_INIT_MUTEXES 0
	2212	#define CONFIGURE_GO_INIT_CONDITION_VARIABLES 0
	2213	#define CONFIGURE_MAXIMUM_GOROUTINES 0
	2214	#define CONFIGURE_GOROUTINES_TASK_VARIABLES 0
	2215	#define CONFIGURE_MAXIMUM_GO_CHANNELS 0
	2216	#endif
[5aecf664]	2217
[b4f635e]	2218	/**
[27f071cd]	2219	* This is so we can account for tasks with stacks greater than minimum
	2220	* size. This is in bytes.
[b4f635e]	2221	*/
	2222	#ifndef CONFIGURE_EXTRA_TASK_STACKS
	2223	#define CONFIGURE_EXTRA_TASK_STACKS 0
	2224	#endif
[5aecf664]	2225
[94086a9]	2226	/**
	2227	* This macro provides a summation of the various POSIX thread requirements.
	2228	*/
	2229	#define CONFIGURE_POSIX_THREADS \
	2230	(CONFIGURE_MAXIMUM_POSIX_THREADS + \
	2231	CONFIGURE_MAXIMUM_ADA_TASKS + \
	2232	CONFIGURE_MAXIMUM_GOROUTINES)
	2233
[d8ac087]	2234	#ifdef RTEMS_POSIX_API
	2235	/**
	2236	* This macro provides summation of the POSIX Mutexes.
	2237	*/
	2238	#define CONFIGURE_POSIX_MUTEXES \
	2239	(CONFIGURE_MAXIMUM_POSIX_MUTEXES + \
[1fc2e960]	2240	CONFIGURE_LIBBLOCK_POSIX_MUTEXES + \
[d8ac087]	2241	CONFIGURE_GNAT_MUTEXES + \
	2242	CONFIGURE_MAXIMUM_ADA_TASKS + \
	2243	CONFIGURE_MAXIMUM_FAKE_ADA_TASKS + \
	2244	CONFIGURE_GO_INIT_MUTEXES + \
	2245	CONFIGURE_MAXIMUM_GO_CHANNELS)
	2246
	2247	/**
	2248	* This macro provides summation of the POSIX Condition Variables.
	2249	*/
	2250	#define CONFIGURE_POSIX_CONDITION_VARIABLES \
	2251	(CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES + \
[1fc2e960]	2252	CONFIGURE_LIBBLOCK_POSIX_CONDITION_VARIABLES + \
[d8ac087]	2253	CONFIGURE_MAXIMUM_ADA_TASKS + \
	2254	CONFIGURE_MAXIMUM_FAKE_ADA_TASKS + \
	2255	CONFIGURE_GO_INIT_CONDITION_VARIABLES + \
	2256	CONFIGURE_MAXIMUM_GO_CHANNELS)
	2257
	2258	#define CONFIGURE_MEMORY_FOR_POSIX \
	2259	(CONFIGURE_MEMORY_FOR_POSIX_MUTEXES(CONFIGURE_POSIX_MUTEXES) + \
	2260	CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES( \
	2261	CONFIGURE_POSIX_CONDITION_VARIABLES) + \
	2262	CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS( \
	2263	CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS) + \
	2264	CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES( \
	2265	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES) + \
	2266	CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUE_DESCRIPTORS( \
	2267	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS) + \
	2268	CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( \
	2269	CONFIGURE_MAXIMUM_POSIX_SEMAPHORES) + \
	2270	CONFIGURE_MEMORY_FOR_POSIX_BARRIERS(CONFIGURE_MAXIMUM_POSIX_BARRIERS) + \
	2271	CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS( \
	2272	CONFIGURE_MAXIMUM_POSIX_SPINLOCKS) + \
	2273	CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS( \
	2274	CONFIGURE_MAXIMUM_POSIX_RWLOCKS) + \
	2275	CONFIGURE_MEMORY_FOR_POSIX_TIMERS(CONFIGURE_MAXIMUM_POSIX_TIMERS))
	2276	#else
	2277	#define CONFIGURE_MEMORY_FOR_POSIX 0
	2278	#endif
	2279
[8486081]	2280	/*
[3652ad35]	2281	* Calculate the RAM size based on the maximum number of objects configured.
	2282	*/
[08bae5e6]	2283
	2284	#ifndef CONFIGURE_EXECUTIVE_RAM_SIZE
[3652ad35]	2285
[5877cc3a]	2286	/**
[27f071cd]	2287	* Account for allocating the following per object
	2288	* + array of object control structures
	2289	* + local pointer table -- pointer per object plus a zero'th
	2290	* entry in the local pointer table.
[5877cc3a]	2291	*/
[b2b143f4]	2292
[5877cc3a]	2293	#define CONFIGURE_MEMORY_FOR_TASKS(_tasks, _number_FP_tasks) \
[3df4d74]	2294	( \
[69aa3349]	2295	_Configure_Object_RAM(_tasks, sizeof(Configuration_Thread_control)) \
[3df4d74]	2296	+ _Configure_Max_Objects(_number_FP_tasks) \
	2297	* _Configure_From_workspace(CONTEXT_FP_SIZE) \
	2298	* (CONTEXT_FP_SIZE != 0) \
	2299	)
[b2b143f4]	2300
[5877cc3a]	2301	/**
[27f071cd]	2302	* This defines the amount of memory configured for the multiprocessing
	2303	* support required by this application.
[5877cc3a]	2304	*/
[df49c60]	2305	#ifdef CONFIGURE_MP_APPLICATION
[f2a776ac]	2306	#define CONFIGURE_MEMORY_FOR_MP \
	2307	(CONFIGURE_MEMORY_FOR_PROXIES(CONFIGURE_MP_MAXIMUM_PROXIES) + \
	2308	CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS( \
	2309	CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS) + \
[b4f635e]	2310	CONFIGURE_MEMORY_FOR_TASKS(1, 1) \
[3652ad35]	2311	)
	2312	#else
[f2a776ac]	2313	#define CONFIGURE_MEMORY_FOR_MP 0
[3652ad35]	2314	#endif
[3b89891]	2315
[5877cc3a]	2316	/**
[27f071cd]	2317	* The following macro is used to calculate the memory allocated by RTEMS
	2318	* for the message buffers associated with a particular message queue.
	2319	* There is a fixed amount of overhead per message.
[5877cc3a]	2320	*/
	2321	#define CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE(_messages, _size) \
	2322	_Configure_From_workspace( \
	2323	(_messages) * ((_size) + sizeof(CORE_message_queue_Buffer_control)))
	2324
	2325	/**
[27f071cd]	2326	* This macros is set to the amount of memory required for pending message
	2327	* buffers in bytes. It should be constructed by adding together a
	2328	* set of values determined by CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE.
[7042065]	2329	*/
	2330	#ifndef CONFIGURE_MESSAGE_BUFFER_MEMORY
[5877cc3a]	2331	#define CONFIGURE_MESSAGE_BUFFER_MEMORY 0
[7042065]	2332	#endif
	2333
[5877cc3a]	2334	/**
[27f071cd]	2335	* This macro is available just in case the confdefs.h file underallocates
	2336	* memory for a particular application. This lets the user add some extra
	2337	* memory in case something broken and underestimates.
[5877cc3a]	2338	*
[27f071cd]	2339	* It is also possible for cases where confdefs.h overallocates memory,
	2340	* you could substract memory from the allocated. The estimate is just
	2341	* that, an estimate, and assumes worst case alignment and padding on
	2342	* each allocated element. So in some cases it could be too conservative.
[5877cc3a]	2343	*
[27f071cd]	2344	* NOTE: Historically this was used for message buffers.
[7042065]	2345	*/
	2346	#ifndef CONFIGURE_MEMORY_OVERHEAD
[5877cc3a]	2347	#define CONFIGURE_MEMORY_OVERHEAD 0
	2348	#endif
	2349
	2350	/**
[51f823c9]	2351	* RTEMS uses two instance of an internal mutex class. This accounts
	2352	* for these mutexes.
[5877cc3a]	2353	*/
[b2b143f4]	2354	#define CONFIGURE_API_MUTEX_MEMORY \
[51f823c9]	2355	_Configure_Object_RAM(2, sizeof(API_Mutex_Control))
[b2b143f4]	2356
[06dcaf0]	2357	/**
[27f071cd]	2358	* This calculates the amount of memory reserved for the IDLE tasks.
	2359	* In an SMP system, each CPU core has its own idle task.
[4175abd]	2360	*/
[06dcaf0]	2361	#if defined(RTEMS_SMP)
[b4f635e]	2362	#define CONFIGURE_IDLE_TASKS_COUNT CONFIGURE_SMP_MAXIMUM_PROCESSORS
[06dcaf0]	2363	#else
[b4f635e]	2364	#define CONFIGURE_IDLE_TASKS_COUNT 1
[06dcaf0]	2365	#endif
[4175abd]	2366
[b4f635e]	2367	/**
[27f071cd]	2368	* This defines the formula used to compute the amount of memory
	2369	* reserved for IDLE task control structures.
[b4f635e]	2370	*/
	2371	#define CONFIGURE_MEMORY_FOR_IDLE_TASK \
	2372	CONFIGURE_MEMORY_FOR_TASKS(CONFIGURE_IDLE_TASKS_COUNT, 0)
	2373
[5877cc3a]	2374	/**
[27f071cd]	2375	* This macro accounts for general RTEMS system overhead.
[5877cc3a]	2376	*/
[df49c60]	2377	#define CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD \
[4175abd]	2378	( CONFIGURE_MEMORY_FOR_IDLE_TASK + /* IDLE and stack */ \
[5877cc3a]	2379	CONFIGURE_INTERRUPT_STACK_MEMORY + /* interrupt stack */ \
[4175abd]	2380	CONFIGURE_API_MUTEX_MEMORY /* allocation mutex */ \
[b3dcd9a2]	2381	)
	2382
[5877cc3a]	2383	/**
[27f071cd]	2384	* This macro reserves the memory required by the statically configured
	2385	* user extensions.
[5877cc3a]	2386	*/
	2387	#define CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS \
[466cf31d]	2388	(CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS == 0 ? 0 : \
	2389	_Configure_From_workspace( \
	2390	CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS \
	2391	* sizeof(User_extensions_Switch_control) \
	2392	))
[5877cc3a]	2393
	2394	/**
[27f071cd]	2395	* This macro provides a summation of the memory required by the
	2396	* Classic API as configured.
[5877cc3a]	2397	*/
	2398	#define CONFIGURE_MEMORY_FOR_CLASSIC \
[a46e6b6d]	2399	(CONFIGURE_MEMORY_FOR_TASK_VARIABLES(CONFIGURE_MAXIMUM_TASK_VARIABLES + \
	2400	CONFIGURE_GOROUTINES_TASK_VARIABLES) + \
[f0f450a]	2401	CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS + \
	2402	CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER ) + \
[b2f216e1]	2403	CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_SEMAPHORES) + \
[3652ad35]	2404	CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES) + \
	2405	CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS) + \
[e746a88]	2406	CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ) + \
[3652ad35]	2407	CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS) + \
	2408	CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS) + \
[659019e]	2409	CONFIGURE_MEMORY_FOR_BARRIERS(CONFIGURE_BARRIERS) + \
[5877cc3a]	2410	CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS) \
	2411	)
	2412
[06dcaf0]	2413	#if defined(RTEMS_SMP)
	2414	#define CONFIGURE_MEMORY_FOR_SMP \
	2415	(CONFIGURE_SMP_MAXIMUM_PROCESSORS * \
	2416	_Configure_From_workspace( CONFIGURE_INTERRUPT_STACK_SIZE ) \
	2417	)
	2418	#else
	2419	#define CONFIGURE_MEMORY_FOR_SMP 0
	2420	#endif
	2421
[5877cc3a]	2422	/**
[27f071cd]	2423	* This calculates the memory required for the executive workspace.
[5877cc3a]	2424	*/
	2425	#define CONFIGURE_EXECUTIVE_RAM_SIZE \
	2426	(( \
[df49c60]	2427	CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD + \
[5877cc3a]	2428	CONFIGURE_MEMORY_FOR_TASKS( \
[94086a9]	2429	CONFIGURE_TASKS, CONFIGURE_TASKS) + \
	2430	CONFIGURE_MEMORY_FOR_TASKS( \
	2431	CONFIGURE_POSIX_THREADS, CONFIGURE_POSIX_THREADS) + \
[5877cc3a]	2432	CONFIGURE_MEMORY_FOR_CLASSIC + \
[e6c87f7]	2433	CONFIGURE_MEMORY_FOR_POSIX_KEYS( \
[5c0c0cf]	2434	CONFIGURE_POSIX_KEYS, \
[e6c87f7]	2435	CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS ) + \
[5877cc3a]	2436	CONFIGURE_MEMORY_FOR_POSIX + \
	2437	CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS + \
	2438	CONFIGURE_MEMORY_FOR_MP + \
[06dcaf0]	2439	CONFIGURE_MEMORY_FOR_SMP + \
[7042065]	2440	CONFIGURE_MESSAGE_BUFFER_MEMORY + \
[b4f635e]	2441	(CONFIGURE_MEMORY_OVERHEAD * 1024) \
[7042065]	2442	) & ~0x7)
[b4f635e]	2443
	2444	/*
	2445	* Now account for any extra memory that initialization tasks or threads
	2446	* may have requested.
	2447	*/
	2448
	2449	/**
[27f071cd]	2450	* This accounts for any extra memory required by the Classic API
	2451	* Initialization Task.
[b4f635e]	2452	*/
	2453	#if (CONFIGURE_INIT_TASK_STACK_SIZE > CONFIGURE_MINIMUM_TASK_STACK_SIZE)
	2454	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART \
	2455	(CONFIGURE_INIT_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE)
	2456	#else
	2457	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART 0
[08bae5e6]	2458	#endif
	2459
[b4f635e]	2460	/**
[27f071cd]	2461	* This accounts for any extra memory required by the POSIX API
	2462	* Initialization Thread.
[b4f635e]	2463	*/
	2464	#if defined(RTEMS_POSIX_API) && \
	2465	(CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE > \
	2466	CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE)
	2467	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART \
	2468	(CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE - \
	2469	CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE)
	2470	#else
	2471	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART 0
	2472	#endif
	2473
	2474	/**
[27f071cd]	2475	* This macro provides a summation of the various initialization task
	2476	* and thread stack requirements.
[b4f635e]	2477	*/
	2478	#define CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS \
	2479	(CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART + \
	2480	CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART)
	2481
	2482	#define CONFIGURE_IDLE_TASKS_STACK \
	2483	(CONFIGURE_IDLE_TASKS_COUNT * \
[9fa3cf0d]	2484	_Configure_From_stackspace( CONFIGURE_IDLE_TASK_STACK_SIZE ) )
[b4f635e]	2485
	2486	#define CONFIGURE_TASKS_STACK \
[b6911069]	2487	(_Configure_Max_Objects( CONFIGURE_TASKS ) * \
[9fa3cf0d]	2488	_Configure_From_stackspace( CONFIGURE_MINIMUM_TASK_STACK_SIZE ) )
[b4f635e]	2489
	2490	#define CONFIGURE_POSIX_THREADS_STACK \
	2491	(_Configure_Max_Objects( CONFIGURE_MAXIMUM_POSIX_THREADS ) * \
[9fa3cf0d]	2492	_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
[b4f635e]	2493
	2494	#define CONFIGURE_GOROUTINES_STACK \
	2495	(_Configure_Max_Objects( CONFIGURE_MAXIMUM_GOROUTINES ) * \
[9fa3cf0d]	2496	_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
[b4f635e]	2497
	2498	#define CONFIGURE_ADA_TASKS_STACK \
	2499	(_Configure_Max_Objects( CONFIGURE_MAXIMUM_ADA_TASKS ) * \
[9fa3cf0d]	2500	_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
[b4f635e]	2501
	2502	#else /* CONFIGURE_EXECUTIVE_RAM_SIZE */
	2503
	2504	#define CONFIGURE_IDLE_TASKS_STACK 0
	2505	#define CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS 0
	2506	#define CONFIGURE_TASKS_STACK 0
	2507	#define CONFIGURE_POSIX_THREADS_STACK 0
	2508	#define CONFIGURE_GOROUTINES_STACK 0
	2509	#define CONFIGURE_ADA_TASKS_STACK 0
	2510
	2511	#if CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK != 0
	2512	#error "CONFIGURE_EXECUTIVE_RAM_SIZE defined with request for CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK"
	2513	#endif
	2514
	2515	#if CONFIGURE_EXTRA_TASK_STACKS != 0
	2516	#error "CONFIGURE_EXECUTIVE_RAM_SIZE defined with request for CONFIGURE_EXTRA_TASK_STACKS"
	2517	#endif
	2518
	2519	#endif /* CONFIGURE_EXECUTIVE_RAM_SIZE */
	2520
	2521	#define CONFIGURE_STACK_SPACE_SIZE \
	2522	( \
	2523	CONFIGURE_IDLE_TASKS_STACK + \
	2524	CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS + \
	2525	CONFIGURE_TASKS_STACK + \
	2526	CONFIGURE_POSIX_THREADS_STACK + \
	2527	CONFIGURE_GOROUTINES_STACK + \
	2528	CONFIGURE_ADA_TASKS_STACK + \
	2529	CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK + \
[b6911069]	2530	CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS + \
[b4f635e]	2531	CONFIGURE_EXTRA_TASK_STACKS \
	2532	)
	2533
[08bae5e6]	2534	#ifdef CONFIGURE_INIT
[69aa3349]	2535	typedef struct {
	2536	Thread_Control Control;
	2537	#if CONFIGURE_MAXIMUM_USER_EXTENSIONS > 0
	2538	void *extensions[ CONFIGURE_MAXIMUM_USER_EXTENSIONS + 1 ];
	2539	#endif
	2540	union {
[beab7329]	2541	Scheduler_Node Base;
[69aa3349]	2542	#ifdef CONFIGURE_SCHEDULER_CBS
[beab7329]	2543	Scheduler_CBS_Node CBS;
[69aa3349]	2544	#endif
	2545	#ifdef CONFIGURE_SCHEDULER_EDF
[beab7329]	2546	Scheduler_EDF_Node EDF;
[69aa3349]	2547	#endif
[beab7329]	2548	#ifdef CONFIGURE_SCHEDULER_PRIORITY
	2549	Scheduler_priority_Node Priority;
	2550	#endif
	2551	#ifdef CONFIGURE_SCHEDULER_SIMPLE_SMP
	2552	Scheduler_SMP_Node Simple_SMP;
	2553	#endif
	2554	#ifdef CONFIGURE_SCHEDULER_PRIORITY_SMP
	2555	Scheduler_priority_SMP_Node Priority_SMP;
[69aa3349]	2556	#endif
	2557	#ifdef CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP
[beab7329]	2558	Scheduler_priority_affinity_SMP_Node Priority_affinity_SMP;
[69aa3349]	2559	#endif
	2560	#ifdef CONFIGURE_SCHEDULER_USER_PER_THREAD
	2561	CONFIGURE_SCHEDULER_USER_PER_THREAD User;
	2562	#endif
	2563	} Scheduler;
	2564	RTEMS_API_Control API_RTEMS;
	2565	#ifndef CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS
	2566	uint32_t Notepads[ RTEMS_NUMBER_NOTEPADS ];
	2567	#endif
	2568	#ifdef RTEMS_POSIX_API
	2569	POSIX_API_Control API_POSIX;
	2570	#endif
	2571	#if !defined(RTEMS_SCHEDSIM) \
	2572	&& defined(RTEMS_NEWLIB) \
	2573	&& !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)
	2574	struct _reent Newlib;
	2575	#else
	2576	struct { /* Empty */ } Newlib;
	2577	#endif
	2578	} Configuration_Thread_control;
	2579
	2580	const size_t _Thread_Control_size = sizeof( Configuration_Thread_control );
	2581
	2582	const Thread_Control_add_on _Thread_Control_add_ons[] = {
	2583	{
[2d36931]	2584	offsetof( Configuration_Thread_control, Control.Scheduler.node ),
[69aa3349]	2585	offsetof( Configuration_Thread_control, Scheduler )
	2586	}, {
	2587	offsetof(
	2588	Configuration_Thread_control,
	2589	Control.API_Extensions[ THREAD_API_RTEMS ]
	2590	),
	2591	offsetof( Configuration_Thread_control, API_RTEMS )
	2592	}, {
	2593	offsetof(
	2594	Configuration_Thread_control,
	2595	Control.libc_reent
	2596	),
	2597	offsetof( Configuration_Thread_control, Newlib )
	2598	}
	2599	#ifdef RTEMS_POSIX_API
	2600	, {
	2601	offsetof(
	2602	Configuration_Thread_control,
	2603	Control.API_Extensions[ THREAD_API_POSIX ]
	2604	),
	2605	offsetof( Configuration_Thread_control, API_POSIX )
	2606	}
	2607	#endif
	2608	};
	2609
	2610	const size_t _Thread_Control_add_on_count =
	2611	RTEMS_ARRAY_SIZE( _Thread_Control_add_ons );
	2612
[5877cc3a]	2613	/**
[27f071cd]	2614	* This is the Classic API Configuration Table.
[5877cc3a]	2615	*/
	2616	rtems_api_configuration_table Configuration_RTEMS_API = {
[b6911069]	2617	CONFIGURE_TASKS,
[4cb19041]	2618	CONFIGURE_NOTEPADS_ENABLED,
[f0f450a]	2619	CONFIGURE_MAXIMUM_TIMERS + CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER,
[b2f216e1]	2620	CONFIGURE_SEMAPHORES,
[5877cc3a]	2621	CONFIGURE_MAXIMUM_MESSAGE_QUEUES,
	2622	CONFIGURE_MAXIMUM_PARTITIONS,
	2623	CONFIGURE_MAXIMUM_REGIONS,
	2624	CONFIGURE_MAXIMUM_PORTS,
	2625	CONFIGURE_MAXIMUM_PERIODS,
[659019e]	2626	CONFIGURE_BARRIERS,
[5877cc3a]	2627	CONFIGURE_INIT_TASK_TABLE_SIZE,
	2628	CONFIGURE_INIT_TASK_TABLE
	2629	};
[e6d4b1d]	2630
[5877cc3a]	2631	#ifdef RTEMS_POSIX_API
	2632	/**
[27f071cd]	2633	* This is the POSIX API Configuration Table.
[5877cc3a]	2634	*/
	2635	posix_api_configuration_table Configuration_POSIX_API = {
[94086a9]	2636	CONFIGURE_POSIX_THREADS,
[d8ac087]	2637	CONFIGURE_POSIX_MUTEXES,
	2638	CONFIGURE_POSIX_CONDITION_VARIABLES,
[5877cc3a]	2639	CONFIGURE_MAXIMUM_POSIX_TIMERS,
	2640	CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS,
	2641	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES,
[ade17392]	2642	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS,
[5877cc3a]	2643	CONFIGURE_MAXIMUM_POSIX_SEMAPHORES,
	2644	CONFIGURE_MAXIMUM_POSIX_BARRIERS,
	2645	CONFIGURE_MAXIMUM_POSIX_RWLOCKS,
	2646	CONFIGURE_MAXIMUM_POSIX_SPINLOCKS,
	2647	CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE,
	2648	CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME
	2649	};
	2650	#endif
[2eba45d]	2651
[6784547]	2652	/**
[27f071cd]	2653	* This variable specifies the minimum stack size for tasks in an RTEMS
	2654	* application.
[ecf0f4c]	2655	*
[27f071cd]	2656	* NOTE: This is left as a simple uint32_t so it can be externed as
	2657	* needed without requring being high enough logical to
	2658	* include the full configuration table.
[ecf0f4c]	2659	*/
[28352fae]	2660	uint32_t rtems_minimum_stack_size =
[ecf0f4c]	2661	CONFIGURE_MINIMUM_TASK_STACK_SIZE;
	2662
[6784547]	2663	/**
[27f071cd]	2664	* This variable specifies the maximum priority value that
	2665	* a task may have. This must be a power of 2 between 4
	2666	* and 256 and is specified in terms of Classic API
	2667	* priority values.
[80f9d77]	2668	*
[27f071cd]	2669	* NOTE: This is left as a simple uint8_t so it can be externed as
	2670	* needed without requring being high enough logical to
	2671	* include the full configuration table.
[80f9d77]	2672	*/
	2673	uint8_t rtems_maximum_priority = CONFIGURE_MAXIMUM_PRIORITY;
	2674
[5877cc3a]	2675	/**
[27f071cd]	2676	* This is the primary Configuration Table for this application.
[5877cc3a]	2677	*/
[ae4f125e]	2678	const rtems_configuration_table Configuration = {
[5877cc3a]	2679	CONFIGURE_EXECUTIVE_RAM_SIZE, /* required RTEMS workspace */
[b4f635e]	2680	CONFIGURE_STACK_SPACE_SIZE, /* required stack space */
[5877cc3a]	2681	CONFIGURE_MAXIMUM_USER_EXTENSIONS, /* maximum dynamic extensions */
[5c0c0cf]	2682	CONFIGURE_POSIX_KEYS, /* POSIX keys are always */
[e6c87f7]	2683	CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS, /* enabled */
[5877cc3a]	2684	CONFIGURE_MICROSECONDS_PER_TICK, /* microseconds per clock tick */
[50fc8f6]	2685	1000 * CONFIGURE_MICROSECONDS_PER_TICK, /* nanoseconds per clock tick */
[5877cc3a]	2686	CONFIGURE_TICKS_PER_TIMESLICE, /* ticks per timeslice quantum */
	2687	CONFIGURE_IDLE_TASK_BODY, /* user's IDLE task */
	2688	CONFIGURE_IDLE_TASK_STACK_SIZE, /* IDLE task stack size */
	2689	CONFIGURE_INTERRUPT_STACK_SIZE, /* interrupt stack size */
[9fa3cf0d]	2690	CONFIGURE_TASK_STACK_ALLOCATOR_INIT, /* stack allocator init */
[5877cc3a]	2691	CONFIGURE_TASK_STACK_ALLOCATOR, /* stack allocator */
	2692	CONFIGURE_TASK_STACK_DEALLOCATOR, /* stack deallocator */
	2693	CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY, /* true to clear memory */
[b4f635e]	2694	#ifdef CONFIGURE_UNIFIED_WORK_AREAS /* true for unified work areas */
	2695	true,
	2696	#else
	2697	false,
	2698	#endif
	2699	#ifdef CONFIGURE_TASK_STACK_ALLOCATOR_AVOIDS_WORK_SPACE /* true to avoid
	2700	work space for thread stack
	2701	allocation */
	2702	true,
	2703	#else
	2704	false,
	2705	#endif
[f913c79]	2706	#ifdef RTEMS_SMP
	2707	#ifdef CONFIGURE_SMP_APPLICATION
	2708	true,
	2709	#else
	2710	false,
	2711	#endif
	2712	#endif
[5877cc3a]	2713	CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS, /* number of static extensions */
	2714	CONFIGURE_INITIAL_EXTENSION_TABLE, /* pointer to static extensions */
	2715	#if defined(RTEMS_MULTIPROCESSING)
	2716	CONFIGURE_MULTIPROCESSING_TABLE, /* pointer to MP config table */
	2717	#endif
[6c2eedc]	2718	#ifdef RTEMS_SMP
[e1598a6]	2719	CONFIGURE_SMP_MAXIMUM_PROCESSORS,
[6c2eedc]	2720	#endif
[5877cc3a]	2721	};
[08bae5e6]	2722	#endif
	2723
	2724	#endif /* CONFIGURE_HAS_OWN_CONFIGURATION_TABLE */
	2725
[06dcaf0]	2726	#if defined(RTEMS_SMP)
	2727	/*
	2728	* Instantiate the Per CPU information based upon the user configuration.
	2729	*/
	2730	#if defined(CONFIGURE_INIT)
[c236082]	2731	Per_CPU_Control_envelope _Per_CPU_Information[CONFIGURE_SMP_MAXIMUM_PROCESSORS];
[06dcaf0]	2732	#endif
	2733
	2734	#endif
	2735
[0ab34c90]	2736	/*
	2737	* If the user has configured a set of Classic API Initialization Tasks,
	2738	* then we need to install the code that runs that loop.
	2739	*/
	2740	#ifdef CONFIGURE_INIT
[d15bae6]	2741	#if defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) \|\| \
	2742	defined(CONFIGURE_HAS_OWN_INIT_TASK_TABLE)
[0ab34c90]	2743	void (*_RTEMS_tasks_Initialize_user_tasks_p)(void) =
	2744	_RTEMS_tasks_Initialize_user_tasks_body;
	2745	#else
	2746	void (*_RTEMS_tasks_Initialize_user_tasks_p)(void) = NULL;
	2747	#endif
	2748	#endif
	2749
	2750	/*
	2751	* If the user has configured a set of POSIX Initialization Threads,
	2752	* then we need to install the code that runs that loop.
	2753	*/
[5a8bc44]	2754	#ifdef RTEMS_POSIX_API
	2755	#ifdef CONFIGURE_INIT
[d15bae6]	2756	#if defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) \|\| \
	2757	defined(CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE)
[28352fae]	2758	void (*_POSIX_Threads_Initialize_user_threads_p)(void) =
[4175abd]	2759	_POSIX_Threads_Initialize_user_threads_body;
[5a8bc44]	2760	#else
	2761	void (*_POSIX_Threads_Initialize_user_threads_p)(void) = NULL;
	2762	#endif
[0ab34c90]	2763	#endif
	2764	#endif
	2765
[08bae5e6]	2766	#ifdef __cplusplus
	2767	}
	2768	#endif
[8486081]	2769
[df0bfdf]	2770	/******************************************************************
	2771	******************************************************************
	2772	******************************************************************
	2773	* CONFIGURATION WARNINGS AND ERROR CHECKING *
	2774	******************************************************************
	2775	******************************************************************
	2776	******************************************************************
[df49c60]	2777	*/
	2778
[b4f635e]	2779	#if defined(CONFIGURE_CONFDEFS_DEBUG) && defined(CONFIGURE_INIT)
	2780	/**
[27f071cd]	2781	* This is a debug mechanism, so if you need to, the executable will
	2782	* have a structure with various partial values. Add to this as you
	2783	* need to. Viewing this structure in gdb combined with dumping
	2784	* the Configuration structures generated should help a lot in tracing
	2785	* down errors and analyzing where over and under allocations are.
[b4f635e]	2786	*/
	2787	typedef struct {
	2788	uint32_t SYSTEM_OVERHEAD;
	2789	uint32_t STATIC_EXTENSIONS;
	2790	uint32_t INITIALIZATION_THREADS_STACKS;
	2791
	2792	uint32_t PER_INTEGER_TASK;
	2793	uint32_t FP_OVERHEAD;
	2794	uint32_t CLASSIC;
	2795	uint32_t POSIX;
	2796
	2797	/* System overhead pieces */
	2798	uint32_t INTERRUPT_STACK_MEMORY;
	2799	uint32_t MEMORY_FOR_IDLE_TASK;
	2800
	2801	/* Classic API Pieces */
	2802	uint32_t CLASSIC_TASKS;
	2803	uint32_t TASK_VARIABLES;
	2804	uint32_t TIMERS;
	2805	uint32_t SEMAPHORES;
	2806	uint32_t MESSAGE_QUEUES;
	2807	uint32_t PARTITIONS;
	2808	uint32_t REGIONS;
	2809	uint32_t PORTS;
	2810	uint32_t PERIODS;
	2811	uint32_t BARRIERS;
	2812	uint32_t USER_EXTENSIONS;
	2813
[e6c87f7]	2814	/* POSIX API managers that are always enabled */
	2815	uint32_t POSIX_KEYS;
	2816
[b4f635e]	2817	#ifdef RTEMS_POSIX_API
	2818	/* POSIX API Pieces */
	2819	uint32_t POSIX_MUTEXES;
	2820	uint32_t POSIX_CONDITION_VARIABLES;
	2821	uint32_t POSIX_TIMERS;
	2822	uint32_t POSIX_QUEUED_SIGNALS;
	2823	uint32_t POSIX_MESSAGE_QUEUES;
	2824	uint32_t POSIX_SEMAPHORES;
	2825	uint32_t POSIX_BARRIERS;
	2826	uint32_t POSIX_SPINLOCKS;
	2827	uint32_t POSIX_RWLOCKS;
	2828	#endif
	2829
	2830	/* Stack space sizes */
	2831	uint32_t IDLE_TASKS_STACK;
	2832	uint32_t INITIALIZATION_THREADS_EXTRA_STACKS;
	2833	uint32_t TASKS_STACK;
	2834	uint32_t POSIX_THREADS_STACK;
	2835	uint32_t GOROUTINES_STACK;
	2836	uint32_t ADA_TASKS_STACK;
	2837	uint32_t EXTRA_MPCI_RECEIVE_SERVER_STACK;
	2838	uint32_t EXTRA_TASK_STACKS;
	2839	} Configuration_Debug_t;
	2840
	2841	Configuration_Debug_t Configuration_Memory_Debug = {
	2842	/* General Information */
	2843	CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD,
	2844	CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS,
	2845	CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS,
	2846	CONFIGURE_MEMORY_FOR_TASKS(1, 0),
	2847	CONFIGURE_MEMORY_FOR_TASKS(0, 1),
	2848	CONFIGURE_MEMORY_FOR_CLASSIC,
	2849	CONFIGURE_MEMORY_FOR_POSIX,
	2850
	2851	/* System overhead pieces */
	2852	CONFIGURE_INTERRUPT_STACK_MEMORY,
	2853	CONFIGURE_MEMORY_FOR_IDLE_TASK,
	2854
	2855	/* Classic API Pieces */
	2856	CONFIGURE_MEMORY_FOR_TASKS(CONFIGURE_MAXIMUM_TASKS, 0),
	2857	CONFIGURE_MEMORY_FOR_TASK_VARIABLES(CONFIGURE_MAXIMUM_TASK_VARIABLES +
	2858	CONFIGURE_GOROUTINES_TASK_VARIABLES),
	2859	CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS),
	2860	CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_SEMAPHORES),
	2861	CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES),
	2862	CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS),
	2863	CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ),
	2864	CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS),
	2865	CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS),
	2866	CONFIGURE_MEMORY_FOR_BARRIERS(CONFIGURE_BARRIERS),
	2867	CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS),
[5c0c0cf]	2868	CONFIGURE_MEMORY_FOR_POSIX_KEYS( CONFIGURE_POSIX_KEYS, \
[e6c87f7]	2869	CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS ),
[b4f635e]	2870
	2871	#ifdef RTEMS_POSIX_API
	2872	/* POSIX API Pieces */
[d8ac087]	2873	CONFIGURE_MEMORY_FOR_POSIX_MUTEXES( CONFIGURE_POSIX_MUTEXES ),
[b4f635e]	2874	CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES(
[d8ac087]	2875	CONFIGURE_POSIX_CONDITION_VARIABLES ),
[b4f635e]	2876	CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(
	2877	CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS ),
	2878	CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(
	2879	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES ),
	2880	CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( CONFIGURE_MAXIMUM_POSIX_SEMAPHORES ),
	2881	CONFIGURE_MEMORY_FOR_POSIX_BARRIERS( CONFIGURE_MAXIMUM_POSIX_BARRIERS ),
	2882	CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS( CONFIGURE_MAXIMUM_POSIX_SPINLOCKS ),
	2883	CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS( CONFIGURE_MAXIMUM_POSIX_RWLOCKS ),
	2884	CONFIGURE_MEMORY_FOR_POSIX_TIMERS( CONFIGURE_MAXIMUM_POSIX_TIMERS ),
	2885	#endif
	2886
	2887	/* Stack space sizes */
	2888	CONFIGURE_IDLE_TASKS_STACK,
	2889	CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS,
	2890	CONFIGURE_TASKS_STACK,
	2891	CONFIGURE_POSIX_THREADS_STACK,
	2892	CONFIGURE_GOROUTINES_STACK,
	2893	CONFIGURE_ADA_TASKS_STACK,
	2894	CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK,
	2895	CONFIGURE_EXTRA_TASK_STACKS
	2896	};
	2897	#endif
	2898
[df49c60]	2899	/*
[80f9d77]	2900	* Make sure a task/thread of some sort is configured.
	2901	*
	2902	* When analyzing RTEMS to find the smallest possible of memory
	2903	* that must be allocated, you probably do want to configure 0
	2904	* tasks/threads so there is a smaller set of calls to _Workspace_Allocate
	2905	* to analyze.
	2906	*/
	2907	#if !defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION)
	2908	#if (CONFIGURE_MAXIMUM_TASKS == 0) && \
	2909	(CONFIGURE_MAXIMUM_POSIX_THREADS == 0) && \
[a46e6b6d]	2910	(CONFIGURE_MAXIMUM_ADA_TASKS == 0) && \
	2911	(CONFIGURE_MAXIMUM_GOROUTINES == 0)
[80f9d77]	2912	#error "CONFIGURATION ERROR: No tasks or threads configured!!"
	2913	#endif
[df49c60]	2914	#endif
	2915
[5aecf664]	2916	#ifndef RTEMS_SCHEDSIM
[df49c60]	2917	/*
	2918	* Make sure at least one of the initialization task/thread
	2919	* tables was defined.
	2920	*/
	2921	#if !defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) && \
	2922	!defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) && \
[80f9d77]	2923	!defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION)
[168ba07]	2924	#error "CONFIGURATION ERROR: No initialization tasks or threads configured!!"
[df49c60]	2925	#endif
[5aecf664]	2926	#endif
[df49c60]	2927
[df0bfdf]	2928	/*
	2929	* If the user is trying to configure a multiprocessing application and
	2930	* RTEMS was not configured and built multiprocessing, then error out.
	2931	*/
	2932	#if defined(CONFIGURE_MP_APPLICATION) && \
	2933	!defined(RTEMS_MULTIPROCESSING)
	2934	#error "CONFIGURATION ERROR: RTEMS not configured for multiprocessing!!"
	2935	#endif
	2936
	2937	/*
	2938	* If an attempt was made to configure POSIX objects and
	2939	* the POSIX API was not configured into RTEMS, error out.
[e6c87f7]	2940	*
[c9a0a10]	2941	* @note POSIX Keys are always available so the parameters
[e6c87f7]	2942	* CONFIGURE_MAXIMUM_POSIX_KEYS and
	2943	* CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS are not in this list.
[df0bfdf]	2944	*/
	2945	#if !defined(RTEMS_POSIX_API)
	2946	#if ((CONFIGURE_MAXIMUM_POSIX_THREADS != 0) \|\| \
	2947	(CONFIGURE_MAXIMUM_POSIX_MUTEXES != 0) \|\| \
	2948	(CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES != 0) \|\| \
	2949	(CONFIGURE_MAXIMUM_POSIX_TIMERS != 0) \|\| \
	2950	(CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS != 0) \|\| \
	2951	(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES != 0) \|\| \
[ade17392]	2952	(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS != 0) \|\| \
[df0bfdf]	2953	(CONFIGURE_MAXIMUM_POSIX_SEMAPHORES != 0) \|\| \
	2954	(CONFIGURE_MAXIMUM_POSIX_BARRIERS != 0) \|\| \
	2955	(CONFIGURE_MAXIMUM_POSIX_SPINLOCKS != 0) \|\| \
	2956	(CONFIGURE_MAXIMUM_POSIX_RWLOCKS != 0) \|\| \
[98e92b0a]	2957	defined(CONFIGURE_POSIX_INIT_THREAD_TABLE))
[df0bfdf]	2958	#error "CONFIGURATION ERROR: POSIX API support not configured!!"
	2959	#endif
	2960	#endif
	2961
[6784547]	2962	#if !defined(RTEMS_SCHEDSIM)
	2963	#if !defined(CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE)
	2964	/*
	2965	* You must either explicity include or exclude the clock driver.
	2966	* It is such a common newbie error to leave it out. Maybe this
	2967	* will put an end to it.
	2968	*
	2969	* NOTE: If you are using the timer driver, it is considered
	2970	* mutually exclusive with the clock driver because the
	2971	* drivers are assumed to use the same "timer" hardware
	2972	* on many boards.
	2973	*/
	2974	#if !defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \
	2975	!defined(CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER) && \
	2976	!defined(CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER)
	2977	#error "CONFIGURATION ERROR: Do you want the clock driver or not?!?"
	2978	#endif
	2979
	2980	/*
	2981	* Only one of the following three configuration parameters should be
	2982	* defined at a time.
	2983	*/
	2984	#if ((defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) + \
	2985	defined(CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER) + \
	2986	defined(CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER)) > 1)
	2987	#error "CONFIGURATION ERROR: More than one clock/timer driver configuration parameter specified?!?"
	2988	#endif
	2989	#endif /* !defined(CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE) */
	2990	#endif /* !defined(RTEMS_SCHEDSIM) */
[df0bfdf]	2991
[0ab34c90]	2992	/*
	2993	* These names have been obsoleted so make the user application stop compiling
	2994	*/
	2995	#if defined(CONFIGURE_TEST_NEEDS_TIMER_DRIVER) \|\| \
	2996	defined(CONFIGURE_TEST_NEEDS_CONSOLE_DRIVER) \|\| \
	2997	defined(CONFIGURE_TEST_NEEDS_CLOCK_DRIVER) \|\| \
	2998	defined(CONFIGURE_TEST_NEEDS_RTC_DRIVER) \|\| \
	2999	defined(CONFIGURE_TEST_NEEDS_STUB_DRIVER)
	3000	#error "CONFIGURATION ERROR: CONFIGURE_TEST_XXX constants are obsolete"
	3001	#endif
	3002
[80f9d77]	3003	/*
	3004	* Validate the configured maximum priority
	3005	*/
	3006	#if ((CONFIGURE_MAXIMUM_PRIORITY != 3) && \
	3007	(CONFIGURE_MAXIMUM_PRIORITY != 7) && \
	3008	(CONFIGURE_MAXIMUM_PRIORITY != 15) && \
	3009	(CONFIGURE_MAXIMUM_PRIORITY != 31) && \
	3010	(CONFIGURE_MAXIMUM_PRIORITY != 63) && \
	3011	(CONFIGURE_MAXIMUM_PRIORITY != 127) && \
	3012	(CONFIGURE_MAXIMUM_PRIORITY != 255))
	3013	#error "Maximum priority is not 1 less than a power of 2 between 4 and 256"
	3014	#endif
[28352fae]	3015
[80f9d77]	3016	#if (CONFIGURE_MAXIMUM_PRIORITY > PRIORITY_DEFAULT_MAXIMUM)
	3017	#error "Maximum priority configured higher than supported by target."
	3018	#endif
	3019
[ade17392]	3020	/*
	3021	* If you have fewer POSIX Message Queue Descriptors than actual
	3022	* POSIX Message Queues, then you will not be able to open all the
	3023	* queues.
	3024	*/
	3025	#if (CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS < \
	3026	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES)
	3027	#error "Fewer POSIX Message Queue descriptors than Queues!"
	3028	#endif
	3029
[b5c9064]	3030	/*
	3031	* POSIX Key pair shouldn't be less than POSIX Key, which is highly
	3032	* likely to be error.
	3033	*/
[e6c87f7]	3034	#if (CONFIGURE_MAXIMUM_POSIX_KEYS != 0) && \
	3035	(CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS != 0)
	3036	#if (CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS < CONFIGURE_MAXIMUM_POSIX_KEYS)
	3037	#error "Fewer POSIX Key pairs than POSIX Key!"
	3038	#endif
[b5c9064]	3039	#endif
	3040
[08bae5e6]	3041	#endif
	3042	/* end of include file */

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: rtems/cpukit/sapi/include/confdefs.h @ 8fbe2e6

Download in other formats: