Context Navigation

source: rtems/cpukit/sapi/include/confdefs.h @ 0c5beb8e

4.115

Last change on this file since 0c5beb8e was 0c5beb8e, checked in by Chris Johns <chrisj@…>, on 04/26/14 at 23:32:20
rtems: Account for the network semaphore.
Property mode set to `100644`
File size: 97.6 KB

Rev	Line
[b96254f]	1	/**
[27f071cd]	2	* @file
[08bae5e6]	3	*
[9ab091e]	4	* @brief Configuration Table Template that will be Instantiated
	5	* by an Application
	6	*
[27f071cd]	7	* This include file contains the configuration table template that will
	8	* be instantiated by an application based on the setting of a number
	9	* of macros. The macros are documented in the Configuring a System
	10	* chapter of the Classic API User's Guide
[08bae5e6]	11	*
[27f071cd]	12	* The model is to estimate the memory required for each configured item
	13	* and sum those estimates. The estimate can be too high or too low for
	14	* a variety of reasons:
[df49c60]	15	*
[27f071cd]	16	* Reasons estimate is too high:
	17	* + FP contexts (not all tasks are FP)
[df49c60]	18	*
[27f071cd]	19	* Reasons estimate is too low:
	20	* + stacks greater than minimum size
	21	* + messages
	22	* + application must account for device driver resources
	23	* + application must account for add-on library resource requirements
[df49c60]	24	*
[27f071cd]	25	* NOTE: Eventually this may be able to take into account some of
	26	* the above. This procedure has evolved from just enough to
	27	* support the RTEMS Test Suites into something that can be
	28	* used remarkably reliably by most applications.
[b96254f]	29	*/
[28352fae]	30
	31	/*
[e6c87f7]	32	* COPYRIGHT (c) 1989-2014.
[08bae5e6]	33	* On-Line Applications Research Corporation (OAR).
	34	*
[98e4ebf5]	35	* The license and distribution terms for this file may be
	36	* found in the file LICENSE in this distribution or at
[c499856]	37	* http://www.rtems.org/license/LICENSE.
[08bae5e6]	38	*/
	39
	40	#ifndef __CONFIGURATION_TEMPLATE_h
	41	#define __CONFIGURATION_TEMPLATE_h
[8486081]	42
[9c63d90]	43	/*
	44	* Include the executive's configuration
	45	*/
[58fa947]	46	#include <rtems.h>
[b2b143f4]	47	#include <rtems/score/apimutex.h>
[9fa3cf0d]	48	#include <rtems/score/wkspace.h>
[9c63d90]	49
[7571a23]	50	#ifdef CONFIGURE_DISABLE_BSP_SETTINGS
	51	#undef BSP_DEFAULT_UNIFIED_WORK_AREAS
	52	#undef BSP_IDLE_TASK_BODY
	53	#undef BSP_IDLE_TASK_STACK_SIZE
	54	#undef BSP_INITIAL_EXTENSION
	55	#undef BSP_INTERRUPT_STACK_SIZE
	56	#undef BSP_MAXIMUM_DEVICES
	57	#undef BSP_ZERO_WORKSPACE_AUTOMATICALLY
	58	#undef CONFIGURE_BSP_PREREQUISITE_DRIVERS
	59	#undef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK
	60	#else
	61	#include <bsp.h>
	62	#endif
	63
[9c9b62d8]	64	#ifdef RTEMS_NEWLIB
	65	#include <sys/reent.h>
	66	#endif
	67
[5877cc3a]	68	#ifdef __cplusplus
	69	extern "C" {
	70	#endif
	71
[08bae5e6]	72	extern rtems_initialization_tasks_table Initialization_tasks[];
[976162a6]	73	#if defined(RTEMS_MULTIPROCESSING)
	74	extern rtems_multiprocessing_table Multiprocessing_configuration;
	75	#endif
[2eba45d]	76	#ifdef RTEMS_POSIX_API
[5877cc3a]	77	extern posix_api_configuration_table Configuration_POSIX_API;
[2eba45d]	78	#endif
[08bae5e6]	79
[5877cc3a]	80	/**
[27f071cd]	81	* This macro determines whether the RTEMS reentrancy support for
	82	* the Newlib C Library is enabled.
[3b89891]	83	*/
[5aecf664]	84	#ifdef RTEMS_SCHEDSIM
	85	#undef RTEMS_NEWLIB
	86	#endif
	87
[5877cc3a]	88	#if (defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY))
[c3db01d0]	89	#define CONFIGURE_NEWLIB_EXTENSION 1
[623893c]	90	#else
[c3db01d0]	91	#define CONFIGURE_NEWLIB_EXTENSION 0
[9c63d90]	92	#endif
[623893c]	93
[5aecf664]	94	#ifndef RTEMS_SCHEDSIM
[d40da79b]	95	#include <rtems/libio.h>
	96
	97	#ifdef CONFIGURE_INIT
[a290fbe9]	98	const rtems_libio_helper rtems_libio_init_helper =
	99	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	100	rtems_libio_helper_null;
	101	#else
[d40da79b]	102	rtems_libio_init;
[a290fbe9]	103	#endif
[d40da79b]	104
[5fa0e5c5]	105	const rtems_libio_helper rtems_libio_post_driver_helper =
[a290fbe9]	106	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	107	rtems_libio_helper_null;
	108	#else
[5fa0e5c5]	109	rtems_libio_post_driver;
[a290fbe9]	110	#endif
[d40da79b]	111
[b7cf1ff7]	112	const rtems_libio_helper rtems_libio_exit_helper =
	113	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	114	rtems_libio_helper_null;
	115	#else
	116	rtems_libio_exit;
	117	#endif
	118
[a290fbe9]	119	const rtems_libio_helper rtems_fs_init_helper =
	120	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	121	rtems_libio_helper_null;
	122	#else
[d40da79b]	123	rtems_filesystem_initialize;
[a290fbe9]	124	#endif
[d40da79b]	125	#endif
[5aecf664]	126	#endif
[d40da79b]	127
[717391f5]	128	/*
[739329f]	129	* If the application disables the filesystem, they will not need
	130	* a mount table, so do not produce one.
[717391f5]	131	*/
[739329f]	132	#ifdef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
	133	#define CONFIGURE_HAS_OWN_MOUNT_TABLE
[d40da79b]	134	#endif
	135
[5877cc3a]	136	/**
[27f071cd]	137	* This macro defines the number of POSIX file descriptors allocated
	138	* and managed by libio. These are the "integer" file descriptors that
	139	* are used by calls like open(2) and read(2).
[df49c60]	140	*/
[bd9c3d1]	141	#ifndef CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS
[5877cc3a]	142	#define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 3
[bd9c3d1]	143	#endif
	144
[5877cc3a]	145	/**
[27f071cd]	146	* Semaphore count used by the IO library.
[5877cc3a]	147	*/
[5a4bb75]	148	#define CONFIGURE_LIBIO_SEMAPHORES 1
[bd9c3d1]	149
[5c0c0cf]	150	/**
	151	* POSIX key count used by the IO library.
	152	*/
	153	#define CONFIGURE_LIBIO_POSIX_KEYS 1
	154
[43908825]	155	#ifdef CONFIGURE_INIT
[5877cc3a]	156	/**
[27f071cd]	157	* When instantiating the configuration tables, this variable is
	158	* initialized to specify the maximum number of file descriptors.
[5877cc3a]	159	*/
	160	uint32_t rtems_libio_number_iops = CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS;
[43908825]	161	#endif
	162
[5877cc3a]	163	/**
[27f071cd]	164	* This macro determines if termios is disabled by this application.
	165	* This only means that resources will not be reserved. If you end
	166	* up using termios, it will fail.
[df49c60]	167	*/
	168	#ifdef CONFIGURE_TERMIOS_DISABLED
[5877cc3a]	169	#define CONFIGURE_TERMIOS_SEMAPHORES 0
[df49c60]	170	#else
[5877cc3a]	171	/**
[27f071cd]	172	* This macro specifies the number of serial or PTY ports that will
	173	* use termios.
[5877cc3a]	174	*/
	175	#ifndef CONFIGURE_NUMBER_OF_TERMIOS_PORTS
	176	#define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 1
	177	#endif
[df49c60]	178
[5877cc3a]	179	/**
[27f071cd]	180	* This macro reserves the number of semaphores required by termios
	181	* based upon the number of communication ports that will use it.
[5877cc3a]	182	*/
	183	#define CONFIGURE_TERMIOS_SEMAPHORES \
	184	((CONFIGURE_NUMBER_OF_TERMIOS_PORTS * 4) + 1)
[df49c60]	185	#endif
	186
[5877cc3a]	187	/**
[27f071cd]	188	* This macro specifies the number of PTYs that can be concurrently
	189	* active.
[d3d2afdf]	190	*/
	191	#ifndef CONFIGURE_MAXIMUM_PTYS
[5877cc3a]	192	#define CONFIGURE_MAXIMUM_PTYS 0
[d3d2afdf]	193	#endif
	194
[5877cc3a]	195	/**
[27f071cd]	196	* This variable contains the maximum number of PTYs that can be
	197	* concurrently active.
[5877cc3a]	198	*/
[d3d2afdf]	199	#ifdef CONFIGURE_INIT
[396e3258]	200	int rtems_telnetd_maximum_ptys = CONFIGURE_MAXIMUM_PTYS;
[d3d2afdf]	201	#else
[396e3258]	202	extern int rtems_telnetd_maximum_ptys;
[d3d2afdf]	203	#endif
	204
[06dcaf0]	205	#if defined(RTEMS_SMP)
	206	/*
	207	* If configured for SMP, then we need to know the maximum CPU cores.
	208	*/
	209	#if !defined(CONFIGURE_SMP_APPLICATION)
[9ab091e]	210	#if !defined(CONFIGURE_SMP_MAXIMUM_PROCESSORS)
[06dcaf0]	211	#define CONFIGURE_SMP_MAXIMUM_PROCESSORS 1
	212	#endif
	213	#else
[9ab091e]	214	#if !defined(CONFIGURE_SMP_MAXIMUM_PROCESSORS)
[06dcaf0]	215	#error "CONFIGURE_SMP_MAXIMUM_PROCESSORS not specified for SMP Application"
	216	#endif
	217	#endif
	218	#endif
	219
[29e92b0]	220	/*
	221	* Filesystems and Mount Table Configuration.
	222	*
	223	* Defines to control the file system:
	224	*
	225	* CONFIGURE_APPLICATION_DISABLE_FILESYSTEM:
	226	* Disable the RTEMS filesystems. You get an empty DEVFS.
	227	*
	228	* CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM:
	229	* Use the DEVFS as the root file system. Limited functions are
	230	* provided when this is used.
	231	*
	232	* CONFIGURE_FILESYSTEM_ALL:
	233	* Add file filesystems to the default filesystem table.
	234	*
	235	* List of available file systems. You can define as many as you like:
[59673224]	236	* CONFIGURE_FILESYSTEM_MINIIMFS - MiniIMFS, use DEVFS now
[29e92b0]	237	* CONFIGURE_FILESYSTEM_IMFS - In Memory File System (IMFS)
	238	* CONFIGURE_FILESYSTEM_DEVFS - Device File System (DSVFS)
	239	* CONFIGURE_FILESYSTEM_TFTPFS - TFTP File System, networking enabled
	240	* CONFIGURE_FILESYSTEM_FTPFS - FTP File System, networking enabled
[59673224]	241	* CONFIGURE_FILESYSTEM_NFS - Network File System, networking enabled
[29e92b0]	242	* CONFIGURE_FILESYSTEM_DOSFS - DOS File System, uses libblock
	243	* CONFIGURE_FILESYSTEM_RFS - RTEMS File System (RFS), uses libblock
[3c96bee]	244	* CONFIGURE_FILESYSTEM_JFFS2 - Journalling Flash File System, Version 2
[29e92b0]	245	*
	246	* Combinations:
	247	*
	248	* - If nothing is defined the base file system is the IMFS.
	249	*
	250	* - If CONFIGURE_APPLICATION_DISABLE_FILESYSTEM is defined all filesystem
	251	* are disabled by force and an empty DEVFS is created.
	252	*
	253	* - If CONFIGURE_USE_DEV_AS_BASE_FILESYSTEM is defined all filesystem
	254	* are disabled by force and DEVFS is defined.
	255	*/
	256
[d40da79b]	257	#ifdef CONFIGURE_INIT
[29e92b0]	258
	259	/*
	260	* Include all file systems. Do this before checking if the filesystem has
	261	* been disabled.
	262	*/
	263	#ifdef CONFIGURE_FILESYSTEM_ALL
[59673224]	264	#define CONFIGURE_FILESYSTEM_MINIIMFS
[29e92b0]	265	#define CONFIGURE_FILESYSTEM_IMFS
	266	#define CONFIGURE_FILESYSTEM_DEVFS
	267	#define CONFIGURE_FILESYSTEM_TFTPFS
	268	#define CONFIGURE_FILESYSTEM_FTPFS
[59673224]	269	#define CONFIGURE_FILESYSTEM_NFS
[29e92b0]	270	#define CONFIGURE_FILESYSTEM_DOSFS
	271	#define CONFIGURE_FILESYSTEM_RFS
[3c96bee]	272	#define CONFIGURE_FILESYSTEM_JFFS2
[29e92b0]	273	#endif
	274
	275	/*
[80c1577]	276	* If disabling the file system, give a compile error if the user has
	277	* configured other filesystem parameters.
[29e92b0]	278	*/
[80c1577]	279	#if defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM)
	280	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM) \|\| \
	281	defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM)
	282	#error "Filesystem disabled but a base filesystem configured."
	283	#endif
	284
	285	#if defined(CONFIGURE_FILESYSTEM_MINIIMFS) \|\| \
	286	defined(CONFIGURE_FILESYSTEM_IMFS) \|\| \
	287	defined(CONFIGURE_FILESYSTEM_DEVFS) \|\| \
	288	defined(CONFIGURE_FILESYSTEM_TFTPFS) \|\| \
	289	defined(CONFIGURE_FILESYSTEM_FTPFS) \|\| \
	290	defined(CONFIGURE_FILESYSTEM_NFS) \|\| \
	291	defined(CONFIGURE_FILESYSTEM_DOSFS) \|\| \
[3c96bee]	292	defined(CONFIGURE_FILESYSTEM_RFS) \|\| \
	293	defined(CONFIGURE_FILESYSTEM_JFFS2)
[9bd0258d]	294	#error "Configured filesystems but root filesystem was not IMFS!"
	295	#error "Filesystems could be disabled, DEVFS is root, or"
[80c1577]	296	#error " miniIMFS is root!"
[9ab091e]	297	#endif
[29e92b0]	298	#endif
	299
	300	/*
	301	* If the base filesystem is DEVFS define it else define IMFS.
	302	* We will have either DEVFS or IMFS defined after this.
	303	*/
[f89c34bb]	304	#if !defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM)
	305	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
	306	#define CONFIGURE_FILESYSTEM_DEVFS
	307	#elif defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM)
[59673224]	308	#define CONFIGURE_FILESYSTEM_MINIIMFS
[f89c34bb]	309	#elif !defined(CONFIGURE_FILESYSTEM_IMFS)
	310	#define CONFIGURE_FILESYSTEM_IMFS
	311	#endif
[29e92b0]	312	#endif
	313
	314	#endif
	315
[5aecf664]	316	#ifndef RTEMS_SCHEDSIM
[29e92b0]	317	/**
	318	* IMFS
	319	*/
	320	#include <rtems/imfs.h>
	321
	322	/**
[27f071cd]	323	* This specifies the number of bytes per block for files within the IMFS.
	324	* There are a maximum number of blocks per file so this dictates the maximum
	325	* size of a file. This has to be balanced with the unused portion of each
	326	* block that might be wasted.
[29e92b0]	327	*/
	328	#ifndef CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK
	329	#define CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK \
	330	IMFS_MEMFILE_DEFAULT_BYTES_PER_BLOCK
	331	#endif
	332
	333	/**
[27f071cd]	334	* This defines the miniIMFS file system table entry.
[9ab091e]	335	*/
[29e92b0]	336	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_miniIMFS) && \
[59673224]	337	defined(CONFIGURE_FILESYSTEM_MINIIMFS)
[14fc3a77]	338	#define CONFIGURE_FILESYSTEM_ENTRY_miniIMFS \
	339	{ RTEMS_FILESYSTEM_TYPE_MINIIMFS, miniIMFS_initialize }
[29e92b0]	340	#endif
[5aecf664]	341	#endif
[29e92b0]	342
[659019e]	343	/**
[27f071cd]	344	* Internall it is called FIFOs not pipes
[659019e]	345	*/
	346	#if defined(CONFIGURE_PIPES_ENABLED)
	347	#define CONFIGURE_FIFOS_ENABLED
	348	#endif
	349
[5aecf664]	350	#ifndef RTEMS_SCHEDSIM
[29e92b0]	351	/**
[27f071cd]	352	* This defines the IMFS file system table entry.
[9ab091e]	353	*/
[29e92b0]	354	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS) && \
	355	defined(CONFIGURE_FILESYSTEM_IMFS)
[659019e]	356	#if defined(CONFIGURE_FIFOS_ENABLED)
[14fc3a77]	357	#define CONFIGURE_FILESYSTEM_ENTRY_IMFS \
	358	{ RTEMS_FILESYSTEM_TYPE_IMFS, fifoIMFS_initialize }
[241f4c96]	359	#else
[14fc3a77]	360	#define CONFIGURE_FILESYSTEM_ENTRY_IMFS \
	361	{ RTEMS_FILESYSTEM_TYPE_IMFS, IMFS_initialize }
[241f4c96]	362	#endif
[29e92b0]	363	#endif
[5aecf664]	364	#endif
[29e92b0]	365
[659019e]	366	/**
[27f071cd]	367	* This sets up the resources for the PIPES/FIFOs
[659019e]	368	*/
	369	#if defined(CONFIGURE_FIFOS_ENABLED)
[46e69ff]	370	#if !defined(CONFIGURE_MAXIMUM_FIFOS) && !defined(CONFIGURE_MAXIMUM_PIPES)
	371	#error "No FIFOs or PIPES configured"
	372	#endif
[659019e]	373	#if !defined(CONFIGURE_MAXIMUM_FIFOS)
[46e69ff]	374	#define CONFIGURE_MAXIMUM_FIFOS 0
	375	#endif
	376	#if !defined(CONFIGURE_MAXIMUM_PIPES)
	377	#define CONFIGURE_MAXIMUM_PIPES 0
[659019e]	378	#endif
[46e69ff]	379	#define CONFIGURE_BARRIERS_FOR_FIFOS \
	380	(2 * (CONFIGURE_MAXIMUM_FIFOS + CONFIGURE_MAXIMUM_PIPES))
	381	#define CONFIGURE_SEMAPHORES_FOR_FIFOS \
	382	(1 + (CONFIGURE_MAXIMUM_FIFOS + CONFIGURE_MAXIMUM_PIPES))
[659019e]	383	#else
	384	#define CONFIGURE_BARRIERS_FOR_FIFOS 0
	385	#define CONFIGURE_SEMAPHORES_FOR_FIFOS 0
	386	#endif
	387
[29e92b0]	388	/**
	389	* DEVFS
[9ab091e]	390	*/
[29e92b0]	391	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS) && \
	392	defined(CONFIGURE_FILESYSTEM_DEVFS)
	393	#include <rtems/devfs.h>
[14fc3a77]	394	#define CONFIGURE_FILESYSTEM_ENTRY_DEVFS \
	395	{ RTEMS_FILESYSTEM_TYPE_DEVFS, devFS_initialize }
[29e92b0]	396	#endif
	397
	398	#ifdef RTEMS_NETWORKING
	399	/**
	400	* FTPFS
[9ab091e]	401	*/
[29e92b0]	402	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS) && \
[9ab091e]	403	defined(CONFIGURE_FILESYSTEM_FTPFS)
[29e92b0]	404	#include <rtems/ftpfs.h>
[14fc3a77]	405	#define CONFIGURE_FILESYSTEM_ENTRY_FTPFS \
	406	{ RTEMS_FILESYSTEM_TYPE_FTPFS, rtems_ftpfs_initialize }
[29e92b0]	407	#endif
	408
	409	/**
	410	* TFTPFS
[9ab091e]	411	*/
[29e92b0]	412	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS) && \
	413	defined(CONFIGURE_FILESYSTEM_TFTPFS)
	414	#include <rtems/tftp.h>
[14fc3a77]	415	#define CONFIGURE_FILESYSTEM_ENTRY_TFTPFS \
	416	{ RTEMS_FILESYSTEM_TYPE_TFTPFS, rtems_tftpfs_initialize }
[29e92b0]	417	#endif
	418
	419	/**
[59673224]	420	* NFS
[9ab091e]	421	*/
[59673224]	422	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_NFS) && \
	423	defined(CONFIGURE_FILESYSTEM_NFS)
[29e92b0]	424	#include <librtemsNfs.h>
[c9a0a10]	425	#if !defined(CONFIGURE_MAXIMUM_NFS_MOUNTS)
	426	#define CONFIGURE_MAXIMUM_NFS_MOUNTS 1
	427	#endif
[59673224]	428	#define CONFIGURE_FILESYSTEM_ENTRY_NFS \
	429	{ RTEMS_FILESYSTEM_TYPE_NFS, rtems_nfs_initialize }
[c9a0a10]	430	#define CONFIGURE_SEMAPHORES_FOR_NFS ((CONFIGURE_MAXIMUM_NFS_MOUNTS * 2) + 1)
	431	#else
	432	#define CONFIGURE_SEMAPHORES_FOR_NFS 0
[29e92b0]	433	#endif
[e306f3df]	434	#else
	435	#define CONFIGURE_SEMAPHORES_FOR_NFS 0
[29e92b0]	436	#endif
	437
	438	/**
	439	* DOSFS
[9ab091e]	440	*/
[29e92b0]	441	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS) && \
	442	defined(CONFIGURE_FILESYSTEM_DOSFS)
	443	#include <rtems/dosfs.h>
[c9a0a10]	444	#if !defined(CONFIGURE_MAXIMUM_DOSFS_MOUNTS)
	445	#define CONFIGURE_MAXIMUM_DOSFS_MOUNTS 1
	446	#endif
[14fc3a77]	447	#define CONFIGURE_FILESYSTEM_ENTRY_DOSFS \
	448	{ RTEMS_FILESYSTEM_TYPE_DOSFS, rtems_dosfs_initialize }
[c9a0a10]	449	#define CONFIGURE_SEMAPHORES_FOR_DOSFS CONFIGURE_MAXIMUM_DOSFS_MOUNTS
	450	#else
	451	#define CONFIGURE_SEMAPHORES_FOR_DOSFS 0
[29e92b0]	452	#endif
	453
	454	/**
	455	* RFS
[9ab091e]	456	*/
[29e92b0]	457	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_RFS) && \
	458	defined(CONFIGURE_FILESYSTEM_RFS)
	459	#include <rtems/rtems-rfs.h>
[c9a0a10]	460	#if !defined(CONFIGURE_MAXIMUM_RFS_MOUNTS)
	461	#define CONFIGURE_MAXIMUM_RFS_MOUNTS 1
	462	#endif
[14fc3a77]	463	#define CONFIGURE_FILESYSTEM_ENTRY_RFS \
	464	{ RTEMS_FILESYSTEM_TYPE_RFS, rtems_rfs_rtems_initialise }
[c9a0a10]	465	#define CONFIGURE_SEMAPHORES_FOR_RFS CONFIGURE_MAXIMUM_RFS_MOUNTS
	466	#else
	467	#define CONFIGURE_SEMAPHORES_FOR_RFS 0
[29e92b0]	468	#endif
	469
[3c96bee]	470	/**
	471	* JFFS2
	472	*/
	473	#if !defined(CONFIGURE_FILESYSTEM_ENTRY_JFFS2) && \
	474	defined(CONFIGURE_FILESYSTEM_JFFS2)
	475	#include <rtems/jffs2.h>
[c9a0a10]	476	#if !defined(CONFIGURE_MAXIMUM_JFFS2_MOUNTS)
	477	#define CONFIGURE_MAXIMUM_JFFS2_MOUNTS 1
	478	#endif
[3c96bee]	479	#define CONFIGURE_FILESYSTEM_ENTRY_JFFS2 \
	480	{ RTEMS_FILESYSTEM_TYPE_JFFS2, rtems_jffs2_initialize }
[c9a0a10]	481	#define CONFIGURE_SEMAPHORES_FOR_JFFS2 CONFIGURE_MAXIMUM_JFFS2_MOUNTS
	482	#else
	483	#define CONFIGURE_SEMAPHORES_FOR_JFFS2 0
[3c96bee]	484	#endif
	485
[c9a0a10]	486	#define CONFIGURE_SEMAPHORES_FOR_FILE_SYSTEMS (CONFIGURE_SEMAPHORES_FOR_FIFOS + \
	487	CONFIGURE_SEMAPHORES_FOR_NFS + \
	488	CONFIGURE_SEMAPHORES_FOR_DOSFS + \
	489	CONFIGURE_SEMAPHORES_FOR_RFS + \
	490	CONFIGURE_SEMAPHORES_FOR_JFFS2)
	491
[29e92b0]	492	#ifdef CONFIGURE_INIT
	493
[84e1742]	494	/**
[27f071cd]	495	* DEVFS variables.
[84e1742]	496	*
[27f071cd]	497	* The number of individual devices that may be registered
	498	* in the system or the CONFIGURE_MAXIMUM_DEVICES variable
	499	* is defaulted to 4 when a filesystem is enabled, unless
	500	* the bsp overwrides this. In which case the value is set
	501	* to BSP_MAXIMUM_DEVICES.
[29e92b0]	502	*/
[3b7c123]	503	#ifdef CONFIGURE_FILESYSTEM_DEVFS
[d40da79b]	504	#ifndef CONFIGURE_MAXIMUM_DEVICES
[84e1742]	505	#if defined(BSP_MAXIMUM_DEVICES)
	506	#define CONFIGURE_MAXIMUM_DEVICES BSP_MAXIMUM_DEVICES
	507	#else
	508	#define CONFIGURE_MAXIMUM_DEVICES 4
	509	#endif
[d40da79b]	510	#endif
	511	#include <rtems/devfs.h>
	512	#endif
	513
[5aecf664]	514	#ifndef RTEMS_SCHEDSIM
[dfce6724]	515	#if defined(CONFIGURE_FILESYSTEM_IMFS) \|\| \
[59673224]	516	defined(CONFIGURE_FILESYSTEM_MINIIMFS)
[dfce6724]	517	int imfs_rq_memfile_bytes_per_block = CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK;
	518	#endif
[5aecf664]	519	#endif
[dfce6724]	520
[29e92b0]	521	/**
	522	* Table termination record.
	523	*/
	524	#define CONFIGURE_FILESYSTEM_NULL { NULL, NULL }
[43f7a90]	525
[5aecf664]	526	#ifndef RTEMS_SCHEDSIM
[29e92b0]	527	/**
	528	* The default file system table. Must be terminated with the NULL entry if
	529	* you provide your own.
	530	*/
	531	#ifndef CONFIGURE_HAS_OWN_FILESYSTEM_TABLE
[7d01d244]	532	const rtems_filesystem_table_t rtems_filesystem_table[] = {
[59673224]	533	#if defined(CONFIGURE_FILESYSTEM_MINIIMFS) && \
[29e92b0]	534	defined(CONFIGURE_FILESYSTEM_ENTRY_miniIMFS)
	535	CONFIGURE_FILESYSTEM_ENTRY_miniIMFS,
	536	#endif
	537	#if defined(CONFIGURE_FILESYSTEM_IMFS) && \
	538	defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS)
	539	CONFIGURE_FILESYSTEM_ENTRY_IMFS,
	540	#endif
	541	#if defined(CONFIGURE_FILESYSTEM_DEVFS) && \
	542	defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS)
	543	CONFIGURE_FILESYSTEM_ENTRY_DEVFS,
	544	#endif
	545	#if defined(CONFIGURE_FILESYSTEM_TFTPFS) && \
	546	defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS)
	547	CONFIGURE_FILESYSTEM_ENTRY_TFTPFS,
	548	#endif
	549	#if defined(CONFIGURE_FILESYSTEM_FTPFS) && \
	550	defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS)
	551	CONFIGURE_FILESYSTEM_ENTRY_FTPFS,
	552	#endif
[59673224]	553	#if defined(CONFIGURE_FILESYSTEM_NFS) && \
	554	defined(CONFIGURE_FILESYSTEM_ENTRY_NFS)
	555	CONFIGURE_FILESYSTEM_ENTRY_NFS,
[29e92b0]	556	#endif
	557	#if defined(CONFIGURE_FILESYSTEM_DOSFS) && \
	558	defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS)
	559	CONFIGURE_FILESYSTEM_ENTRY_DOSFS,
	560	#endif
	561	#if defined(CONFIGURE_FILESYSTEM_RFS) && \
	562	defined(CONFIGURE_FILESYSTEM_ENTRY_RFS)
	563	CONFIGURE_FILESYSTEM_ENTRY_RFS,
	564	#endif
[3c96bee]	565	#if defined(CONFIGURE_FILESYSTEM_JFFS2) && \
	566	defined(CONFIGURE_FILESYSTEM_ENTRY_JFFS2)
	567	CONFIGURE_FILESYSTEM_ENTRY_JFFS2,
	568	#endif
[29e92b0]	569	CONFIGURE_FILESYSTEM_NULL
	570	};
	571	#endif
[43f7a90]	572
[c3db01d0]	573	#ifndef CONFIGURE_HAS_OWN_MOUNT_TABLE
[3b7c123]	574	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
	575	static devFS_node devFS_root_filesystem_nodes [CONFIGURE_MAXIMUM_DEVICES];
	576	static const devFS_data devFS_root_filesystem_data = {
	577	devFS_root_filesystem_nodes,
	578	CONFIGURE_MAXIMUM_DEVICES
	579	};
	580	#endif
	581	const rtems_filesystem_mount_configuration
	582	rtems_filesystem_root_configuration = {
	583	NULL,
	584	NULL,
[46969df]	585	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
[14fc3a77]	586	RTEMS_FILESYSTEM_TYPE_DEVFS,
[46969df]	587	#elif defined(CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM)
[14fc3a77]	588	RTEMS_FILESYSTEM_TYPE_MINIIMFS,
[3b7c123]	589	#else
[14fc3a77]	590	RTEMS_FILESYSTEM_TYPE_IMFS,
[c3db01d0]	591	#endif
	592	RTEMS_FILESYSTEM_READ_WRITE,
[3b7c123]	593	#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
	594	&devFS_root_filesystem_data
	595	#else
	596	NULL
	597	#endif
[c3db01d0]	598	};
	599	#endif
[29e92b0]	600
[43f7a90]	601	#endif
[5aecf664]	602	#endif
[43f7a90]	603
[4afd6f4]	604	/*
[b2b56cb9]	605	* STACK_CHECKER_ON was still available in 4.9 so give a warning for now.
[4afd6f4]	606	*/
	607	#if defined(STACK_CHECKER_ON)
	608	#define CONFIGURE_STACK_CHECKER_ENABLED
	609	#warning "STACK_CHECKER_ON deprecated -- use CONFIGURE_STACK_CHECKER_ENABLED"
	610	#endif
[28352fae]	611
[5877cc3a]	612	/**
[27f071cd]	613	* This configures the stack checker user extension.
[ab97da95]	614	*/
[4afd6f4]	615	#ifdef CONFIGURE_STACK_CHECKER_ENABLED
[5877cc3a]	616	#define CONFIGURE_STACK_CHECKER_EXTENSION 1
[ab97da95]	617	#else
[5877cc3a]	618	#define CONFIGURE_STACK_CHECKER_EXTENSION 0
[ab97da95]	619	#endif
	620
[80f9d77]	621	/**
[27f071cd]	622	* @brief Maximum priority configuration.
[80f9d77]	623	*
[27f071cd]	624	* This configures the maximum priority value that
	625	* a task may have.
[80f9d77]	626	*
[27f071cd]	627	* The following applies to the data space requirements
	628	* of the Priority Scheduler.
[010192d]	629	*
[27f071cd]	630	* By reducing the number of priorities in a system,
	631	* the amount of RAM required by RTEMS can be significantly
	632	* reduced. RTEMS allocates a Chain_Control structure per
	633	* priority and this structure contains 3 pointers. So
	634	* the default is (256 * 12) = 3K on 32-bit architectures.
[80f9d77]	635	*
[27f071cd]	636	* This must be one less than a power of 2 between
	637	* 4 and 256. Valid values along with the application
	638	* priority levels and memory saved when pointers are
	639	* 32-bits in size are:
[80f9d77]	640	*
[27f071cd]	641	* + 3, 2 application priorities, 3024 bytes saved
	642	* + 7, 5 application priorities, 2976 bytes saved
	643	* + 15, 13 application priorities, 2880 bytes saved
	644	* + 31, 29 application priorities, 2688 bytes saved
	645	* + 63, 61 application priorities, 2304 bytes saved
	646	* + 127, 125 application priorities, 1536 bytes saved
	647	* + 255, 253 application priorities, 0 bytes saved
[80f9d77]	648	*
[27f071cd]	649	* It is specified in terms of Classic API priority values.
[80f9d77]	650	*/
	651	#ifndef CONFIGURE_MAXIMUM_PRIORITY
[8f25cec]	652	#define CONFIGURE_MAXIMUM_PRIORITY PRIORITY_DEFAULT_MAXIMUM
[80f9d77]	653	#endif
	654
[0faa9dad]	655	/*
	656	* Scheduler configuration.
	657	*
[9ab091e]	658	* The scheduler configuration allows an application to select the
[0faa9dad]	659	* scheduling policy to use. The supported configurations are:
[ba7bc099]	660	* CONFIGURE_SCHEDULER_USER - user provided scheduler
	661	* CONFIGURE_SCHEDULER_PRIORITY - Deterministic Priority Scheduler
[99b3505]	662	* CONFIGURE_SCHEDULER_PRIORITY_SMP - Deterministic Priority SMP Scheduler
[6d24e8b]	663	* CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP - Deterministic Priority SMP Affinity Scheduler
[ba7bc099]	664	* CONFIGURE_SCHEDULER_SIMPLE - Light-weight Priority Scheduler
	665	* CONFIGURE_SCHEDULER_SIMPLE_SMP - Simple SMP Priority Scheduler
[5472ad41]	666	* CONFIGURE_SCHEDULER_EDF - EDF Scheduler
[82db8e56]	667	* CONFIGURE_SCHEDULER_CBS - CBS Scheduler
[9ab091e]	668	*
	669	* If no configuration is specified by the application, then
[0faa9dad]	670	* CONFIGURE_SCHEDULER_PRIORITY is assumed to be the default.
	671	*
	672	* An application can define its own scheduling policy by defining
[010192d]	673	* CONFIGURE_SCHEDULER_USER and the following:
[e1598a6]	674	* - CONFIGURE_SCHEDULER_CONTEXT
	675	* - CONFIGURE_SCHEDULER_CONTROLS
[69aa3349]	676	* - CONFIGURE_SCHEDULER_USER_PER_THREAD
[0faa9dad]	677	*/
[ba7bc099]	678
[0faa9dad]	679	/* If no scheduler is specified, the priority scheduler is default. */
	680	#if !defined(CONFIGURE_SCHEDULER_USER) && \
[0118ed6]	681	!defined(CONFIGURE_SCHEDULER_PRIORITY) && \
[99b3505]	682	!defined(CONFIGURE_SCHEDULER_PRIORITY_SMP) && \
[6d24e8b]	683	!defined(CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP) && \
[ba7bc099]	684	!defined(CONFIGURE_SCHEDULER_SIMPLE) && \
[5472ad41]	685	!defined(CONFIGURE_SCHEDULER_SIMPLE_SMP) && \
[82db8e56]	686	!defined(CONFIGURE_SCHEDULER_EDF) && \
	687	!defined(CONFIGURE_SCHEDULER_CBS)
[ba7bc099]	688	#if defined(RTEMS_SMP) && defined(CONFIGURE_SMP_APPLICATION)
[99b3505]	689	#define CONFIGURE_SCHEDULER_PRIORITY_SMP
[ba7bc099]	690	#else
	691	#define CONFIGURE_SCHEDULER_PRIORITY
	692	#endif
[0faa9dad]	693	#endif
	694
[e1598a6]	695	#include <rtems/scheduler.h>
	696
[9ab091e]	697	/*
[4c794c8]	698	* If the Priority Scheduler is selected, then configure for it.
[0faa9dad]	699	*/
	700	#if defined(CONFIGURE_SCHEDULER_PRIORITY)
[133d54c5]	701	#if !defined(CONFIGURE_SCHEDULER_NAME)
	702	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'P', 'D', ' ')
	703	#endif
	704
[e1598a6]	705	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	706	#define CONFIGURE_SCHEDULER_CONTEXT \
	707	RTEMS_SCHEDULER_CONTEXT_PRIORITY( \
	708	dflt, \
	709	CONFIGURE_MAXIMUM_PRIORITY + 1 \
	710	)
	711
	712	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	713	RTEMS_SCHEDULER_CONTROL_PRIORITY(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	714	#endif
[0faa9dad]	715	#endif
	716
[99b3505]	717	/*
	718	* If the Deterministic Priority SMP Scheduler is selected, then configure for
	719	* it.
	720	*/
	721	#if defined(CONFIGURE_SCHEDULER_PRIORITY_SMP)
[133d54c5]	722	#if !defined(CONFIGURE_SCHEDULER_NAME)
	723	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'D', ' ')
	724	#endif
	725
[e1598a6]	726	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	727	#define CONFIGURE_SCHEDULER_CONTEXT \
	728	RTEMS_SCHEDULER_CONTEXT_PRIORITY_SMP( \
	729	dflt, \
	730	CONFIGURE_MAXIMUM_PRIORITY + 1 \
	731	)
	732
	733	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	734	RTEMS_SCHEDULER_CONTROL_PRIORITY_SMP(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	735	#endif
[99b3505]	736	#endif
	737
[6d24e8b]	738	/*
	739	* If the Deterministic Priority Affinity SMP Scheduler is selected, then configure for
	740	* it.
	741	*/
	742	#if defined(CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP)
[133d54c5]	743	#if !defined(CONFIGURE_SCHEDULER_NAME)
	744	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'A', ' ')
	745	#endif
	746
[e1598a6]	747	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	748	#define CONFIGURE_SCHEDULER_CONTEXT \
	749	RTEMS_SCHEDULER_CONTEXT_PRIORITY_AFFINITY_SMP( \
	750	dflt, \
	751	CONFIGURE_MAXIMUM_PRIORITY + 1 \
	752	)
	753
	754	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	755	RTEMS_SCHEDULER_CONTROL_PRIORITY_AFFINITY_SMP( \
	756	dflt, \
	757	CONFIGURE_SCHEDULER_NAME \
	758	)
[e1598a6]	759	#endif
[6d24e8b]	760	#endif
	761
[9ab091e]	762	/*
[0118ed6]	763	* If the Simple Priority Scheduler is selected, then configure for it.
	764	*/
	765	#if defined(CONFIGURE_SCHEDULER_SIMPLE)
[133d54c5]	766	#if !defined(CONFIGURE_SCHEDULER_NAME)
	767	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'P', 'S', ' ')
	768	#endif
	769
[e1598a6]	770	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	771	#define CONFIGURE_SCHEDULER_CONTEXT RTEMS_SCHEDULER_CONTEXT_SIMPLE(dflt)
	772
[133d54c5]	773	#define CONFIGURE_SCHEDULER_CONTROLS \
	774	RTEMS_SCHEDULER_CONTROL_SIMPLE(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	775	#endif
[0118ed6]	776	#endif
	777
[ba7bc099]	778	/*
	779	* If the Simple SMP Priority Scheduler is selected, then configure for it.
	780	*/
	781	#if defined(CONFIGURE_SCHEDULER_SIMPLE_SMP)
[133d54c5]	782	#if !defined(CONFIGURE_SCHEDULER_NAME)
	783	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'S', ' ')
	784	#endif
	785
[e1598a6]	786	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	787	#define CONFIGURE_SCHEDULER_CONTEXT \
	788	RTEMS_SCHEDULER_CONTEXT_SIMPLE_SMP(dflt)
	789
	790	#define CONFIGURE_SCHEDULER_CONTROLS \
[133d54c5]	791	RTEMS_SCHEDULER_CONTROL_SIMPLE_SMP(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	792	#endif
[ba7bc099]	793	#endif
	794
[5472ad41]	795	/*
	796	* If the EDF Scheduler is selected, then configure for it.
	797	*/
	798	#if defined(CONFIGURE_SCHEDULER_EDF)
[133d54c5]	799	#if !defined(CONFIGURE_SCHEDULER_NAME)
	800	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'E', 'D', 'F')
	801	#endif
	802
[e1598a6]	803	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	804	#define CONFIGURE_SCHEDULER_CONTEXT RTEMS_SCHEDULER_CONTEXT_EDF(dflt)
	805
[133d54c5]	806	#define CONFIGURE_SCHEDULER_CONTROLS \
	807	RTEMS_SCHEDULER_CONTROL_EDF(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	808	#endif
[5472ad41]	809	#endif
	810
[82db8e56]	811	/*
	812	* If the CBS Scheduler is selected, then configure for it.
	813	*/
	814	#if defined(CONFIGURE_SCHEDULER_CBS)
[133d54c5]	815	#if !defined(CONFIGURE_SCHEDULER_NAME)
	816	#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'C', 'B', 'S')
	817	#endif
	818
[e1598a6]	819	#if !defined(CONFIGURE_SCHEDULER_CONTROLS)
	820	#define CONFIGURE_SCHEDULER_CONTEXT RTEMS_SCHEDULER_CONTEXT_CBS(dflt)
	821
[133d54c5]	822	#define CONFIGURE_SCHEDULER_CONTROLS \
	823	RTEMS_SCHEDULER_CONTROL_CBS(dflt, CONFIGURE_SCHEDULER_NAME)
[e1598a6]	824	#endif
[82db8e56]	825
	826	#ifndef CONFIGURE_CBS_MAXIMUM_SERVERS
	827	#define CONFIGURE_CBS_MAXIMUM_SERVERS CONFIGURE_MAXIMUM_TASKS
	828	#endif
	829
	830	#ifdef CONFIGURE_INIT
[e1598a6]	831	const uint32_t _Scheduler_CBS_Maximum_servers =
	832	CONFIGURE_CBS_MAXIMUM_SERVERS;
	833
	834	Scheduler_CBS_Server
	835	_Scheduler_CBS_Server_list[ CONFIGURE_CBS_MAXIMUM_SERVERS ];
[82db8e56]	836	#endif
	837	#endif
	838
[9ab091e]	839	/*
[010192d]	840	* Set up the scheduler entry points table. The scheduling code uses
	841	* this code to know which scheduler is configured by the user.
[0faa9dad]	842	*/
	843	#ifdef CONFIGURE_INIT
[133d54c5]	844	#if defined(CONFIGURE_SCHEDULER_CONTEXT)
	845	CONFIGURE_SCHEDULER_CONTEXT;
	846	#endif
[e1598a6]	847
	848	const Scheduler_Control _Scheduler_Table[] = {
	849	CONFIGURE_SCHEDULER_CONTROLS
[0faa9dad]	850	};
[1fac361]	851
[e1598a6]	852	#if defined(RTEMS_SMP)
	853	const size_t _Scheduler_Count =
	854	RTEMS_ARRAY_SIZE( _Scheduler_Table );
[c5831a3f]	855
	856	const Scheduler_Assignment _Scheduler_Assignments[] = {
	857	#if defined(CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS)
	858	CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS
	859	#else
	860	#define CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT \
	861	RTEMS_SCHEDULER_ASSIGN( \
	862	0, \
	863	RTEMS_SCHEDULER_ASSIGN_PROCESSOR_OPTIONAL \
	864	)
	865	CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	866	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 2
	867	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	868	#endif
	869	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 3
	870	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	871	#endif
	872	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 4
	873	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	874	#endif
	875	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 5
	876	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	877	#endif
	878	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 6
	879	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	880	#endif
	881	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 7
	882	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	883	#endif
	884	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 8
	885	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	886	#endif
	887	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 9
	888	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	889	#endif
	890	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 10
	891	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	892	#endif
	893	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 11
	894	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	895	#endif
	896	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 12
	897	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	898	#endif
	899	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 13
	900	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	901	#endif
	902	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 14
	903	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	904	#endif
	905	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 15
	906	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	907	#endif
	908	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 16
	909	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	910	#endif
	911	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 17
	912	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	913	#endif
	914	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 18
	915	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	916	#endif
	917	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 19
	918	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	919	#endif
	920	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 20
	921	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	922	#endif
	923	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 21
	924	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	925	#endif
	926	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 22
	927	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	928	#endif
	929	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 23
	930	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	931	#endif
	932	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 24
	933	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	934	#endif
	935	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 25
	936	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	937	#endif
	938	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 26
	939	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	940	#endif
	941	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 27
	942	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	943	#endif
	944	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 28
	945	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	946	#endif
	947	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 29
	948	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	949	#endif
	950	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 30
	951	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	952	#endif
	953	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 31
	954	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	955	#endif
	956	#if CONFIGURE_SMP_MAXIMUM_PROCESSORS >= 32
	957	, CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	958	#endif
	959	#undef CONFIGURE_SMP_SCHEDULER_ASSIGN_OPT
	960	#endif
	961	};
	962
	963	RTEMS_STATIC_ASSERT(
	964	CONFIGURE_SMP_MAXIMUM_PROCESSORS
	965	== RTEMS_ARRAY_SIZE( _Scheduler_Assignments ),
	966	_Scheduler_Assignments
	967	);
[e1598a6]	968	#endif
	969
[1fac361]	970	#if defined(CONFIGURE_SCHEDULER_EDF)
	971	const bool _Scheduler_FIXME_thread_priority_queues_are_broken = true;
	972	#else
	973	const bool _Scheduler_FIXME_thread_priority_queues_are_broken = false;
	974	#endif
[0faa9dad]	975	#endif
	976
[80f9d77]	977	/*
	978	* If you said the IDLE task was going to do application initialization
	979	* and didn't override the IDLE body, then something is amiss.
	980	*/
	981	#if (defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION) && \
	982	!defined(CONFIGURE_IDLE_TASK_BODY))
[805cddc]	983	#error "CONFIGURE_ERROR: You did not override the IDLE task body."
[80f9d77]	984	#endif
	985
[5877cc3a]	986	/**
[27f071cd]	987	* @brief Idle task body configuration.
[976162a6]	988	*
[27f071cd]	989	* There is a default IDLE thread body provided by RTEMS which
	990	* has the possibility of being CPU specific. There may be a
	991	* BSP specific override of the RTEMS default body and in turn,
	992	* the application may override and provide its own.
[976162a6]	993	*/
	994	#ifndef CONFIGURE_IDLE_TASK_BODY
[6c71b25]	995	#if defined(BSP_IDLE_TASK_BODY)
[976162a6]	996	#define CONFIGURE_IDLE_TASK_BODY BSP_IDLE_TASK_BODY
[6c71b25]	997	#elif (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE)
	998	#define CONFIGURE_IDLE_TASK_BODY _CPU_Thread_Idle_body
[976162a6]	999	#else
[93f7ea15]	1000	/* only instantiate and compile if used */
	1001	#ifdef CONFIGURE_INIT
	1002	void *_Thread_Idle_body(uintptr_t ignored)
	1003	{
	1004	for( ; ; ) ;
	1005	return 0; /* to avoid warning */
	1006	}
	1007	#endif
[6c71b25]	1008	#define CONFIGURE_IDLE_TASK_BODY _Thread_Idle_body
[976162a6]	1009	#endif
	1010	#endif
	1011
[ecf0f4c]	1012	/**
[27f071cd]	1013	* By default, use the minimum stack size requested by this port.
[ecf0f4c]	1014	*/
	1015	#ifndef CONFIGURE_MINIMUM_TASK_STACK_SIZE
	1016	#define CONFIGURE_MINIMUM_TASK_STACK_SIZE CPU_STACK_MINIMUM_SIZE
	1017	#endif
	1018
[b4f635e]	1019	#define CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE \
	1020	(2 * CONFIGURE_MINIMUM_TASK_STACK_SIZE)
	1021
[5877cc3a]	1022	/**
[27f071cd]	1023	* @brief Idle task stack size configuration.
[976162a6]	1024	*
[27f071cd]	1025	* By default, the IDLE task will have a stack of minimum size.
	1026	* The BSP or application may override this value.
[976162a6]	1027	*/
	1028	#ifndef CONFIGURE_IDLE_TASK_STACK_SIZE
	1029	#ifdef BSP_IDLE_TASK_STACK_SIZE
	1030	#define CONFIGURE_IDLE_TASK_STACK_SIZE BSP_IDLE_TASK_STACK_SIZE
	1031	#else
[ecf0f4c]	1032	#define CONFIGURE_IDLE_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
[976162a6]	1033	#endif
	1034	#endif
[b4f635e]	1035	#if CONFIGURE_IDLE_TASK_STACK_SIZE < CONFIGURE_MINIMUM_TASK_STACK_SIZE
	1036	#error "CONFIGURE_IDLE_TASK_STACK_SIZE less than CONFIGURE_MINIMUM_TASK_STACK_SIZE"
	1037	#endif
[976162a6]	1038
[5877cc3a]	1039	/**
[27f071cd]	1040	* @brief Interrupt stack size configuration.
[6aa25da]	1041	*
[27f071cd]	1042	* By default, the interrupt stack will be of minimum size.
	1043	* The BSP or application may override this value.
[6aa25da]	1044	*/
	1045	#ifndef CONFIGURE_INTERRUPT_STACK_SIZE
	1046	#ifdef BSP_INTERRUPT_STACK_SIZE
	1047	#define CONFIGURE_INTERRUPT_STACK_SIZE BSP_INTERRUPT_STACK_SIZE
	1048	#else
[ecf0f4c]	1049	#define CONFIGURE_INTERRUPT_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
[6aa25da]	1050	#endif
	1051	#endif
	1052
[5877cc3a]	1053	/**
[27f071cd]	1054	* This reserves memory for the interrupt stack if it is to be allocated
	1055	* by RTEMS rather than the BSP.
[5877cc3a]	1056	*
[27f071cd]	1057	* @todo Try to get to the point where all BSPs support allocating the
	1058	* memory from the Workspace.
[6aa25da]	1059	*/
	1060	#if (CPU_ALLOCATE_INTERRUPT_STACK == 0)
[d875597c]	1061	#define CONFIGURE_INTERRUPT_STACK_MEMORY 0
	1062	#else
[94a88c1c]	1063	#define CONFIGURE_INTERRUPT_STACK_MEMORY \
	1064	_Configure_From_workspace( CONFIGURE_INTERRUPT_STACK_SIZE )
[6aa25da]	1065	#endif
	1066
[5877cc3a]	1067	/**
[27f071cd]	1068	* Configure the very much optional task stack allocator initialization
[976162a6]	1069	*/
[9fa3cf0d]	1070	#ifndef CONFIGURE_TASK_STACK_ALLOCATOR_INIT
	1071	#define CONFIGURE_TASK_STACK_ALLOCATOR_INIT NULL
[976162a6]	1072	#endif
	1073
[9fa3cf0d]	1074	/*
	1075	* Configure the very much optional task stack allocator and deallocator.
[5877cc3a]	1076	*/
[9fa3cf0d]	1077	#if !defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
	1078	&& !defined(CONFIGURE_TASK_STACK_DEALLOCATOR)
	1079	#define CONFIGURE_TASK_STACK_ALLOCATOR _Workspace_Allocate
	1080	#define CONFIGURE_TASK_STACK_DEALLOCATOR _Workspace_Free
	1081	#elif (defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
	1082	&& !defined(CONFIGURE_TASK_STACK_DEALLOCATOR)) \
	1083	\|\| (!defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
	1084	&& defined(CONFIGURE_TASK_STACK_DEALLOCATOR))
	1085	#error "CONFIGURE_TASK_STACK_ALLOCATOR and CONFIGURE_TASK_STACK_DEALLOCATOR must be both defined or both undefined"
[976162a6]	1086	#endif
	1087
[5877cc3a]	1088	/**
[27f071cd]	1089	* Should the RTEMS Workspace and C Program Heap be cleared automatically
	1090	* at system start up?
[976162a6]	1091	*/
	1092	#ifndef CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY
	1093	#ifdef BSP_ZERO_WORKSPACE_AUTOMATICALLY
	1094	#define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY \
	1095	BSP_ZERO_WORKSPACE_AUTOMATICALLY
	1096	#else
	1097	#define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY FALSE
	1098	#endif
	1099	#endif
	1100
[cfcc4e20]	1101	/*
	1102	* RTEMS Malloc configuration
	1103	*/
	1104
	1105	#include <rtems/malloc.h>
	1106
[bd5984de]	1107	#ifdef CONFIGURE_INIT
	1108	/**
[27f071cd]	1109	* By default, RTEMS uses separate heaps for the RTEMS Workspace and
[92b33b8d]	1110	* the C Program Heap. The application can choose optionally to combine
	1111	* these to provide one larger memory pool. This is particularly
[27f071cd]	1112	* useful in combination with the unlimited objects configuration.
[bd5984de]	1113	*/
	1114	#ifdef CONFIGURE_UNIFIED_WORK_AREAS
	1115	Heap_Control *RTEMS_Malloc_Heap = &_Workspace_Area;
	1116	#else
	1117	Heap_Control RTEMS_Malloc_Area;
	1118	Heap_Control *RTEMS_Malloc_Heap = &RTEMS_Malloc_Area;
	1119	#endif
	1120	#endif
	1121
[cfcc4e20]	1122	#ifdef CONFIGURE_INIT
[5877cc3a]	1123	/**
[27f071cd]	1124	* This configures the malloc family statistics to be available.
	1125	* By default only function call counts are kept.
[5877cc3a]	1126	*/
[cfcc4e20]	1127	rtems_malloc_statistics_functions_t *rtems_malloc_statistics_helpers =
	1128	#ifndef CONFIGURE_MALLOC_STATISTICS
	1129	NULL;
	1130	#else
	1131	&rtems_malloc_statistics_helpers_table;
	1132	#endif
	1133	#endif
	1134
	1135	#ifdef CONFIGURE_INIT
[5877cc3a]	1136	/**
[27f071cd]	1137	* This configures the sbrk() support for the malloc family.
	1138	* By default it is assumed that the BSP provides all available
	1139	* RAM to the malloc family implementation so sbrk()'ing to get
	1140	* more memory would always fail anyway.
[5877cc3a]	1141	*/
[47a3cd8]	1142	const rtems_heap_extend_handler rtems_malloc_extend_handler =
	1143	#ifdef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK
	1144	rtems_heap_extend_via_sbrk;
[cfcc4e20]	1145	#else
[47a3cd8]	1146	rtems_heap_null_extend;
[cfcc4e20]	1147	#endif
	1148	#endif
	1149
[bfc54b0]	1150	#ifdef CONFIGURE_INIT
[5877cc3a]	1151	/**
[27f071cd]	1152	* This configures the malloc family plugin which dirties memory
	1153	* allocated. This is helpful for finding unitialized data structure
	1154	* problems.
[5877cc3a]	1155	*/
[0de235f9]	1156	rtems_malloc_dirtier_t rtems_malloc_dirty_helper =
[bfc54b0]	1157	#if defined(CONFIGURE_MALLOC_DIRTY)
	1158	rtems_malloc_dirty_memory;
	1159	#else
	1160	NULL;
	1161	#endif
	1162	#endif
	1163
[6e4c01e]	1164	/**
	1165	* Zero of one returns 0 if the parameter is 0 else 1 is returned.
	1166	*/
	1167	#define _Configure_Zero_or_One(_number) ((_number) ? 1 : 0)
	1168
[fb9e98e]	1169	#define _Configure_Align_up(_val, _align) \
	1170	(((_val) + (_align) - 1) & ~((_align) - 1))
	1171
[5877cc3a]	1172	/**
[27f071cd]	1173	* This is a helper macro used in calculations in this file. It is used
	1174	* to noted when an element is allocated from the RTEMS Workspace and adds
	1175	* a factor to account for heap overhead plus an alignment factor that
	1176	* may be applied.
[5877cc3a]	1177	*/
	1178	#define _Configure_From_workspace(_size) \
[6e4c01e]	1179	(ssize_t) (_Configure_Zero_or_One(_size) * \
[fb9e98e]	1180	_Configure_Align_up((_size) + HEAP_BLOCK_HEADER_SIZE, CPU_HEAP_ALIGNMENT))
[5877cc3a]	1181
[9fa3cf0d]	1182	/**
[27f071cd]	1183	* This is a helper macro used in stack space calculations in this file. It
	1184	* may be provided by the application in case a special task stack allocator
	1185	* is used. The default is allocation from the RTEMS Workspace.
[9fa3cf0d]	1186	*/
	1187	#ifdef CONFIGURE_TASK_STACK_FROM_ALLOCATOR
	1188	#define _Configure_From_stackspace(_stack_size) \
	1189	CONFIGURE_TASK_STACK_FROM_ALLOCATOR(_stack_size)
	1190	#else
	1191	#define _Configure_From_stackspace(_stack_size) \
	1192	_Configure_From_workspace(_stack_size)
	1193	#endif
	1194
[dee98ce]	1195	/**
[27f071cd]	1196	* Do not use the unlimited bit as part of the multiplication
	1197	* for memory usage.
[dee98ce]	1198	*/
	1199	#define _Configure_Max_Objects(_max) \
[6e4c01e]	1200	(_Configure_Zero_or_One(_max) * rtems_resource_maximum_per_allocation(_max))
[dee98ce]	1201
[5877cc3a]	1202	/**
[27f071cd]	1203	* This macro accounts for how memory for a set of configured objects is
	1204	* allocated from the Executive Workspace.
[5877cc3a]	1205	*
[27f071cd]	1206	* NOTE: It does NOT attempt to address the more complex case of unlimited
	1207	* objects.
[5877cc3a]	1208	*/
[fb9e98e]	1209	#define _Configure_Object_RAM(_number, _size) ( \
	1210	_Configure_From_workspace(_Configure_Max_Objects(_number) * (_size)) + \
[5877cc3a]	1211	_Configure_From_workspace( \
[fb9e98e]	1212	_Configure_Zero_or_One(_number) * ( \
	1213	(_Configure_Max_Objects(_number) + 1) * sizeof(Objects_Control *) + \
	1214	_Configure_Align_up(sizeof(void *), CPU_ALIGNMENT) + \
	1215	_Configure_Align_up(sizeof(uint32_t), CPU_ALIGNMENT) \
	1216	) \
[5877cc3a]	1217	) \
	1218	)
	1219
[08bae5e6]	1220	/*
	1221	* Default User Initialization Task Table. This table guarantees that
	1222	* one user initialization table is defined.
	1223	*/
	1224
[be1c11ed]	1225	#ifdef CONFIGURE_RTEMS_INIT_TASKS_TABLE
	1226
	1227	#ifdef CONFIGURE_HAS_OWN_INIT_TASK_TABLE
	1228
	1229	/*
[8486081]	1230	* The user is defining their own table information and setting the
[be1c11ed]	1231	* appropriate variables.
	1232	*/
	1233
	1234	#else
[08bae5e6]	1235
	1236	#ifndef CONFIGURE_INIT_TASK_NAME
[5877cc3a]	1237	#define CONFIGURE_INIT_TASK_NAME rtems_build_name('U', 'I', '1', ' ')
[08bae5e6]	1238	#endif
	1239
	1240	#ifndef CONFIGURE_INIT_TASK_STACK_SIZE
[ecf0f4c]	1241	#define CONFIGURE_INIT_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
[08bae5e6]	1242	#endif
	1243
	1244	#ifndef CONFIGURE_INIT_TASK_PRIORITY
[5877cc3a]	1245	#define CONFIGURE_INIT_TASK_PRIORITY 1
[08bae5e6]	1246	#endif
	1247
	1248	#ifndef CONFIGURE_INIT_TASK_ATTRIBUTES
[5877cc3a]	1249	#define CONFIGURE_INIT_TASK_ATTRIBUTES RTEMS_DEFAULT_ATTRIBUTES
[08bae5e6]	1250	#endif
	1251
	1252	#ifndef CONFIGURE_INIT_TASK_ENTRY_POINT
[d8b74dbe]	1253	#ifdef __cplusplus
	1254	extern "C" {
	1255	#endif
	1256	rtems_task Init (rtems_task_argument );
	1257	#ifdef __cplusplus
	1258	}
	1259	#endif
[5877cc3a]	1260	#define CONFIGURE_INIT_TASK_ENTRY_POINT Init
[d8b74dbe]	1261	extern const char* bsp_boot_cmdline;
	1262	#define CONFIGURE_INIT_TASK_ARGUMENTS ((rtems_task_argument) &bsp_boot_cmdline)
[08bae5e6]	1263	#endif
	1264
	1265	#ifndef CONFIGURE_INIT_TASK_INITIAL_MODES
[05e82bd7]	1266	#if defined(RTEMS_SMP) && defined(CONFIGURE_SMP_APPLICATION)
	1267	#define CONFIGURE_INIT_TASK_INITIAL_MODES RTEMS_DEFAULT_MODES
	1268	#else
	1269	#define CONFIGURE_INIT_TASK_INITIAL_MODES RTEMS_NO_PREEMPT
	1270	#endif
[08bae5e6]	1271	#endif
	1272
	1273	#ifndef CONFIGURE_INIT_TASK_ARGUMENTS
[5877cc3a]	1274	#define CONFIGURE_INIT_TASK_ARGUMENTS 0
[08bae5e6]	1275	#endif
	1276
	1277	#ifdef CONFIGURE_INIT
[5877cc3a]	1278	rtems_initialization_tasks_table Initialization_tasks[] = {
	1279	{ CONFIGURE_INIT_TASK_NAME,
	1280	CONFIGURE_INIT_TASK_STACK_SIZE,
	1281	CONFIGURE_INIT_TASK_PRIORITY,
	1282	CONFIGURE_INIT_TASK_ATTRIBUTES,
	1283	CONFIGURE_INIT_TASK_ENTRY_POINT,
	1284	CONFIGURE_INIT_TASK_INITIAL_MODES,
	1285	CONFIGURE_INIT_TASK_ARGUMENTS
	1286	}
	1287	};
[08bae5e6]	1288	#endif
	1289
[d9a0689e]	1290	#define CONFIGURE_INIT_TASK_TABLE Initialization_tasks
	1291
	1292	#define CONFIGURE_INIT_TASK_TABLE_SIZE \
[9ed2bef]	1293	RTEMS_ARRAY_SIZE(CONFIGURE_INIT_TASK_TABLE)
[d9a0689e]	1294
[be1c11ed]	1295	#endif /* CONFIGURE_HAS_OWN_INIT_TASK_TABLE */
	1296
	1297	#else /* CONFIGURE_RTEMS_INIT_TASKS_TABLE */
	1298
	1299	#define CONFIGURE_INIT_TASK_TABLE NULL
	1300	#define CONFIGURE_INIT_TASK_TABLE_SIZE 0
[45c3da3]	1301	#define CONFIGURE_INIT_TASK_STACK_SIZE 0
[be1c11ed]	1302
[08bae5e6]	1303	#endif
	1304
	1305	/*
	1306	* Default Device Driver Table. Each driver needed by the test is explicitly
	1307	* choosen by that test. There is always a null driver entry.
	1308	*/
	1309
	1310	#define NULL_DRIVER_TABLE_ENTRY \
	1311	{ NULL, NULL, NULL, NULL, NULL, NULL }
	1312
[df49c60]	1313	#ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
[5877cc3a]	1314	#include <rtems/console.h>
[df49c60]	1315	#endif
	1316
	1317	#ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
[5877cc3a]	1318	#include <rtems/clockdrv.h>
[df49c60]	1319	#endif
	1320
	1321	#ifdef CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER
[5877cc3a]	1322	#include <rtems/timerdrv.h>
[08bae5e6]	1323	#endif
	1324
[1d4bac9]	1325	#ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER
[5877cc3a]	1326	#include <rtems/rtc.h>
[1d4bac9]	1327	#endif
	1328
[d2018f71]	1329	#ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER
[5877cc3a]	1330	#include <rtems/watchdogdrv.h>
[d2018f71]	1331	#endif
	1332
[ad4759ab]	1333	#ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER
	1334	#include <rtems/framebuffer.h>
	1335	#endif
	1336
[df49c60]	1337	#ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER
[5877cc3a]	1338	#include <rtems/devnull.h>
[08bae5e6]	1339	#endif
	1340
[5af951f]	1341	#ifdef CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER
	1342	#include <rtems/devzero.h>
	1343	#endif
	1344
[c9b005a9]	1345	#ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER
	1346	/* the ide driver needs the ATA driver */
[5877cc3a]	1347	#ifndef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1348	#define CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1349	#endif
	1350	#include <libchip/ide_ctrl.h>
[c9b005a9]	1351	#endif
	1352
	1353	#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
[5877cc3a]	1354	#include <libchip/ata.h>
[c9b005a9]	1355	#endif
	1356
[08bae5e6]	1357	#ifndef CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE
	1358
[263f4bec]	1359	/**
	1360	* This specifies the maximum number of device drivers that
	1361	* can be installed in the system at one time. It must account
	1362	* for both the statically and dynamically installed drivers.
	1363	*/
	1364	#ifndef CONFIGURE_MAXIMUM_DRIVERS
	1365	#define CONFIGURE_MAXIMUM_DRIVERS
	1366	#endif
	1367
[08bae5e6]	1368	#ifdef CONFIGURE_INIT
[263f4bec]	1369	rtems_driver_address_table
	1370	_IO_Driver_address_table[ CONFIGURE_MAXIMUM_DRIVERS ] = {
[09daf222]	1371	#ifdef CONFIGURE_BSP_PREREQUISITE_DRIVERS
	1372	CONFIGURE_BSP_PREREQUISITE_DRIVERS,
	1373	#endif
	1374	#ifdef CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS
	1375	CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS,
	1376	#endif
[5877cc3a]	1377	#ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
	1378	CONSOLE_DRIVER_TABLE_ENTRY,
	1379	#endif
	1380	#ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
	1381	CLOCK_DRIVER_TABLE_ENTRY,
	1382	#endif
	1383	#ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER
	1384	RTC_DRIVER_TABLE_ENTRY,
	1385	#endif
	1386	#ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER
	1387	WATCHDOG_DRIVER_TABLE_ENTRY,
	1388	#endif
	1389	#ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER
	1390	DEVNULL_DRIVER_TABLE_ENTRY,
	1391	#endif
[5af951f]	1392	#ifdef CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER
	1393	DEVZERO_DRIVER_TABLE_ENTRY,
	1394	#endif
[5877cc3a]	1395	#ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER
	1396	IDE_CONTROLLER_DRIVER_TABLE_ENTRY,
	1397	#endif
	1398	#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1399	ATA_DRIVER_TABLE_ENTRY,
	1400	#endif
[ad4759ab]	1401	#ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER
	1402	FRAME_BUFFER_DRIVER_TABLE_ENTRY,
	1403	#endif
[5877cc3a]	1404	#ifdef CONFIGURE_APPLICATION_EXTRA_DRIVERS
	1405	CONFIGURE_APPLICATION_EXTRA_DRIVERS,
	1406	#endif
	1407	#ifdef CONFIGURE_APPLICATION_NEEDS_NULL_DRIVER
	1408	NULL_DRIVER_TABLE_ENTRY
	1409	#elif !defined(CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER) && \
[4175abd]	1410	!defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \
	1411	!defined(CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER) && \
	1412	!defined(CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER) && \
[5af951f]	1413	!defined(CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER) && \
[4175abd]	1414	!defined(CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER) && \
	1415	!defined(CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER) && \
[ad4759ab]	1416	!defined(CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER) && \
[4175abd]	1417	!defined(CONFIGURE_APPLICATION_EXTRA_DRIVERS)
[5877cc3a]	1418	NULL_DRIVER_TABLE_ENTRY
	1419	#endif
	1420	};
[08bae5e6]	1421
[263f4bec]	1422	const size_t _IO_Number_of_drivers =
	1423	RTEMS_ARRAY_SIZE( _IO_Driver_address_table );
[059a3714]	1424	#endif
	1425
[263f4bec]	1426	#endif /* CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE */
[08bae5e6]	1427
[c9b005a9]	1428	#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
	1429	/*
	1430	* configure the priority of the ATA driver task
	1431	*/
[5877cc3a]	1432	#ifndef CONFIGURE_ATA_DRIVER_TASK_PRIORITY
	1433	#define CONFIGURE_ATA_DRIVER_TASK_PRIORITY ATA_DRIVER_TASK_DEFAULT_PRIORITY
	1434	#endif
	1435	#ifdef CONFIGURE_INIT
[3899a537]	1436	rtems_task_priority rtems_ata_driver_task_priority
[5877cc3a]	1437	= CONFIGURE_ATA_DRIVER_TASK_PRIORITY;
	1438	#endif /* CONFIGURE_INIT */
[c9b005a9]	1439	#endif
	1440
	1441	/*
	1442	* add bdbuf configuration and values for swapout task priority
	1443	*/
	1444	#ifdef CONFIGURE_APPLICATION_NEEDS_LIBBLOCK
[5877cc3a]	1445	#include <rtems/bdbuf.h>
	1446	/*
[3899a537]	1447	* configure the bdbuf cache parameters
[5877cc3a]	1448	*/
[3899a537]	1449	#ifndef CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS
	1450	#define CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS \
	1451	RTEMS_BDBUF_MAX_READ_AHEAD_BLOCKS_DEFAULT
	1452	#endif
	1453	#ifndef CONFIGURE_BDBUF_MAX_WRITE_BLOCKS
	1454	#define CONFIGURE_BDBUF_MAX_WRITE_BLOCKS \
	1455	RTEMS_BDBUF_MAX_WRITE_BLOCKS_DEFAULT
	1456	#endif
[5877cc3a]	1457	#ifndef CONFIGURE_SWAPOUT_TASK_PRIORITY
[3899a537]	1458	#define CONFIGURE_SWAPOUT_TASK_PRIORITY \
	1459	RTEMS_BDBUF_SWAPOUT_TASK_PRIORITY_DEFAULT
	1460	#endif
	1461	#ifndef CONFIGURE_SWAPOUT_SWAP_PERIOD
	1462	#define CONFIGURE_SWAPOUT_SWAP_PERIOD \
	1463	RTEMS_BDBUF_SWAPOUT_TASK_SWAP_PERIOD_DEFAULT
	1464	#endif
	1465	#ifndef CONFIGURE_SWAPOUT_BLOCK_HOLD
	1466	#define CONFIGURE_SWAPOUT_BLOCK_HOLD \
	1467	RTEMS_BDBUF_SWAPOUT_TASK_BLOCK_HOLD_DEFAULT
[5877cc3a]	1468	#endif
[0d15414e]	1469	#ifndef CONFIGURE_SWAPOUT_WORKER_TASKS
	1470	#define CONFIGURE_SWAPOUT_WORKER_TASKS \
	1471	RTEMS_BDBUF_SWAPOUT_WORKER_TASKS_DEFAULT
	1472	#endif
	1473	#ifndef CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY
	1474	#define CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY \
	1475	RTEMS_BDBUF_SWAPOUT_WORKER_TASK_PRIORITY_DEFAULT
	1476	#endif
[b6911069]	1477	#ifndef CONFIGURE_BDBUF_TASK_STACK_SIZE
	1478	#define CONFIGURE_BDBUF_TASK_STACK_SIZE \
	1479	RTEMS_BDBUF_TASK_STACK_SIZE_DEFAULT
	1480	#endif
[0d15414e]	1481	#ifndef CONFIGURE_BDBUF_CACHE_MEMORY_SIZE
	1482	#define CONFIGURE_BDBUF_CACHE_MEMORY_SIZE \
	1483	RTEMS_BDBUF_CACHE_MEMORY_SIZE_DEFAULT
	1484	#endif
	1485	#ifndef CONFIGURE_BDBUF_BUFFER_MIN_SIZE
	1486	#define CONFIGURE_BDBUF_BUFFER_MIN_SIZE \
	1487	RTEMS_BDBUF_BUFFER_MIN_SIZE_DEFAULT
	1488	#endif
	1489	#ifndef CONFIGURE_BDBUF_BUFFER_MAX_SIZE
	1490	#define CONFIGURE_BDBUF_BUFFER_MAX_SIZE \
	1491	RTEMS_BDBUF_BUFFER_MAX_SIZE_DEFAULT
	1492	#endif
[39ee704e]	1493	#ifndef CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY
	1494	#define CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY \
	1495	RTEMS_BDBUF_READ_AHEAD_TASK_PRIORITY_DEFAULT
	1496	#endif
[5877cc3a]	1497	#ifdef CONFIGURE_INIT
[28352fae]	1498	const rtems_bdbuf_config rtems_bdbuf_configuration = {
[3899a537]	1499	CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS,
	1500	CONFIGURE_BDBUF_MAX_WRITE_BLOCKS,
	1501	CONFIGURE_SWAPOUT_TASK_PRIORITY,
	1502	CONFIGURE_SWAPOUT_SWAP_PERIOD,
[0d15414e]	1503	CONFIGURE_SWAPOUT_BLOCK_HOLD,
	1504	CONFIGURE_SWAPOUT_WORKER_TASKS,
	1505	CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY,
[b6911069]	1506	CONFIGURE_BDBUF_TASK_STACK_SIZE,
[0d15414e]	1507	CONFIGURE_BDBUF_CACHE_MEMORY_SIZE,
	1508	CONFIGURE_BDBUF_BUFFER_MIN_SIZE,
[39ee704e]	1509	CONFIGURE_BDBUF_BUFFER_MAX_SIZE,
	1510	CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY
[3899a537]	1511	};
[5877cc3a]	1512	#endif
[b2f216e1]	1513
[39ee704e]	1514	#define CONFIGURE_LIBBLOCK_TASKS \
	1515	(1 + CONFIGURE_SWAPOUT_WORKER_TASKS + \
	1516	(CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS != 0))
[b6911069]	1517
	1518	#define CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS \
	1519	(CONFIGURE_LIBBLOCK_TASKS * \
	1520	(CONFIGURE_BDBUF_TASK_STACK_SIZE <= CONFIGURE_MINIMUM_TASK_STACK_SIZE ? \
	1521	0 : CONFIGURE_BDBUF_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE))
	1522
[b2f216e1]	1523	/*
	1524	* Semaphores:
	1525	* o disk lock
	1526	* o bdbuf lock
	1527	* o bdbuf sync lock
	1528	* o bdbuf access condition
	1529	* o bdbuf transfer condition
	1530	* o bdbuf buffer condition
	1531	*/
	1532	#define CONFIGURE_LIBBLOCK_SEMAPHORES 6
	1533
[0d15414e]	1534	#if defined(CONFIGURE_HAS_OWN_BDBUF_TABLE) \|\| \
	1535	defined(CONFIGURE_BDBUF_BUFFER_SIZE) \|\| \
	1536	defined(CONFIGURE_BDBUF_BUFFER_COUNT)
	1537	#error BDBUF Cache does not use a buffer configuration table. Please remove.
	1538	#endif
[b2f216e1]	1539	#else
[b6911069]	1540	#define CONFIGURE_LIBBLOCK_TASKS 0
	1541	#define CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS 0
[b2f216e1]	1542	#define CONFIGURE_LIBBLOCK_SEMAPHORES 0
[c9b005a9]	1543	#endif /* CONFIGURE_APPLICATION_NEEDS_LIBBLOCK */
[976162a6]	1544
[b4f635e]	1545	#ifndef CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK
	1546	#define CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK 0
	1547	#endif
	1548
[976162a6]	1549	#if defined(RTEMS_MULTIPROCESSING)
[5877cc3a]	1550	/*
	1551	* Default Multiprocessing Configuration Table. The defaults are
	1552	* appropriate for most of the RTEMS Multiprocessor Test Suite. Each
	1553	* value may be overridden within each test to customize the environment.
	1554	*/
[08bae5e6]	1555
[5877cc3a]	1556	#ifdef CONFIGURE_MP_APPLICATION
[f0f450a]	1557	#define CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 1
	1558
[5877cc3a]	1559	#ifndef CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE
[08bae5e6]	1560
[5877cc3a]	1561	#ifndef CONFIGURE_MP_NODE_NUMBER
	1562	#define CONFIGURE_MP_NODE_NUMBER NODE_NUMBER
	1563	#endif
[08bae5e6]	1564
[5877cc3a]	1565	#ifndef CONFIGURE_MP_MAXIMUM_NODES
[4175abd]	1566	#define CONFIGURE_MP_MAXIMUM_NODES 2
[5877cc3a]	1567	#endif
[08bae5e6]	1568
[5877cc3a]	1569	#ifndef CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS
[4175abd]	1570	#define CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS 32
[5877cc3a]	1571	#endif
[f2a776ac]	1572	#define CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS(_global_objects) \
[4175abd]	1573	_Configure_Object_RAM((_global_objects), sizeof(Objects_MP_Control))
[08bae5e6]	1574
[5877cc3a]	1575	#ifndef CONFIGURE_MP_MAXIMUM_PROXIES
[4175abd]	1576	#define CONFIGURE_MP_MAXIMUM_PROXIES 32
[5877cc3a]	1577	#endif
[f2a776ac]	1578	#define CONFIGURE_MEMORY_FOR_PROXIES(_proxies) \
[4175abd]	1579	_Configure_Object_RAM((_proxies) + 1, sizeof(Thread_Proxy_control) )
[08bae5e6]	1580
[5877cc3a]	1581	#ifndef CONFIGURE_MP_MPCI_TABLE_POINTER
[4175abd]	1582	#include <mpci.h>
	1583	#define CONFIGURE_MP_MPCI_TABLE_POINTER &MPCI_table
[5877cc3a]	1584	#endif
[08bae5e6]	1585
[5877cc3a]	1586	#ifdef CONFIGURE_INIT
[4175abd]	1587	rtems_multiprocessing_table Multiprocessing_configuration = {
	1588	CONFIGURE_MP_NODE_NUMBER, /* local node number */
	1589	CONFIGURE_MP_MAXIMUM_NODES, /* maximum # nodes */
	1590	CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS, /* maximum # global objects */
	1591	CONFIGURE_MP_MAXIMUM_PROXIES, /* maximum # proxies */
	1592	CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK, /* MPCI stack > minimum */
	1593	CONFIGURE_MP_MPCI_TABLE_POINTER /* ptr to MPCI config table */
	1594	};
[5877cc3a]	1595	#endif
[08bae5e6]	1596
[5877cc3a]	1597	#define CONFIGURE_MULTIPROCESSING_TABLE &Multiprocessing_configuration
[08bae5e6]	1598
[5877cc3a]	1599	#endif /* CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE */
[08bae5e6]	1600
[5877cc3a]	1601	#else
[08bae5e6]	1602
[5877cc3a]	1603	#define CONFIGURE_MULTIPROCESSING_TABLE NULL
[08bae5e6]	1604
[5877cc3a]	1605	#endif /* CONFIGURE_MP_APPLICATION */
[976162a6]	1606	#endif /* RTEMS_MULTIPROCESSING */
[8486081]	1607
[913ede4f]	1608	#ifndef CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER
	1609	#define CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 0
	1610	#endif
	1611
	1612
[e53aae2]	1613	/**
	1614	* This macro specifies that the user wants to use unlimited objects for any
	1615	* classic or posix objects that have not already been given resource limits.
	1616	*/
	1617	#if defined(CONFIGURE_UNLIMITED_OBJECTS)
[2c1e7ff]	1618	#if !defined(CONFIGURE_UNIFIED_WORK_AREAS) && \
	1619	!defined(CONFIGURE_EXECUTIVE_RAM_SIZE) && \
	1620	!defined(CONFIGURE_MEMORY_OVERHEAD)
	1621	#error "CONFIGURE_UNLIMITED_OBJECTS requires a unified work area, an executive RAM size, or a defined workspace memory overhead"
	1622	#endif
	1623
[e53aae2]	1624	#if !defined(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1625	/**
	1626	* This macro specifies a default allocation size for when auto-extending
	1627	* unlimited objects if none was given by the user.
	1628	*/
	1629	#define CONFIGURE_UNLIMITED_ALLOCATION_SIZE 8
	1630	#endif
	1631	#if !defined(CONFIGURE_MAXIMUM_TASKS)
	1632	#define CONFIGURE_MAXIMUM_TASKS \
	1633	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1634	#endif
	1635	#if !defined(CONFIGURE_MAXIMUM_TIMERS)
	1636	#define CONFIGURE_MAXIMUM_TIMERS \
	1637	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1638	#endif
	1639	#if !defined(CONFIGURE_MAXIMUM_SEMAPHORES)
	1640	#define CONFIGURE_MAXIMUM_SEMAPHORES \
	1641	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1642	#endif
	1643	#if !defined(CONFIGURE_MAXIMUM_MESSAGE_QUEUES)
	1644	#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES \
	1645	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1646	#endif
	1647	#if !defined(CONFIGURE_MAXIMUM_PARTITIONS)
	1648	#define CONFIGURE_MAXIMUM_PARTITIONS \
	1649	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1650	#endif
	1651	#if !defined(CONFIGURE_MAXIMUM_REGIONS)
	1652	#define CONFIGURE_MAXIMUM_REGIONS \
	1653	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1654	#endif
	1655	#if !defined(CONFIGURE_MAXIMUM_PORTS)
	1656	#define CONFIGURE_MAXIMUM_PORTS \
	1657	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1658	#endif
	1659	#if !defined(CONFIGURE_MAXIMUM_PERIODS)
	1660	#define CONFIGURE_MAXIMUM_PERIODS \
	1661	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1662	#endif
	1663	#if !defined(CONFIGURE_MAXIMUM_BARRIERS)
	1664	#define CONFIGURE_MAXIMUM_BARRIERS \
	1665	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1666	#endif
[0e98970]	1667	#if !defined(CONFIGURE_MAXIMUM_POSIX_KEYS)
	1668	#define CONFIGURE_MAXIMUM_POSIX_KEYS \
	1669	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1670	#endif
	1671	#if !defined(CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS)
	1672	#define CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS \
	1673	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1674	#endif
[e53aae2]	1675
	1676	#ifdef RTEMS_POSIX_API
	1677	#if !defined(CONFIGURE_MAXIMUM_POSIX_THREADS)
	1678	#define CONFIGURE_MAXIMUM_POSIX_THREADS \
	1679	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1680	#endif
	1681	#if !defined(CONFIGURE_MAXIMUM_POSIX_MUTEXES)
	1682	#define CONFIGURE_MAXIMUM_POSIX_MUTEXES \
	1683	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1684	#endif
	1685	#if !defined(CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES)
	1686	#define CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES \
	1687	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1688	#endif
	1689	#if !defined(CONFIGURE_MAXIMUM_POSIX_TIMERS)
	1690	#define CONFIGURE_MAXIMUM_POSIX_TIMERS \
	1691	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1692	#endif
	1693	/*
	1694	#if !defined(CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS)
	1695	#define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS \
	1696	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1697	#endif
	1698	*/
	1699	#if !defined(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES)
	1700	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES \
	1701	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1702	#endif
	1703	#if !defined(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS)
	1704	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS \
	1705	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1706	#endif
	1707	#if !defined(CONFIGURE_MAXIMUM_POSIX_SEMAPHORES)
	1708	#define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES \
	1709	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1710	#endif
	1711	#if !defined(CONFIGURE_MAXIMUM_POSIX_BARRIERS)
	1712	#define CONFIGURE_MAXIMUM_POSIX_BARRIERS \
	1713	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1714	#endif
	1715	#if !defined(CONFIGURE_MAXIMUM_POSIX_RWLOCKS)
	1716	#define CONFIGURE_MAXIMUM_POSIX_RWLOCKS \
	1717	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1718	#endif
	1719	#if !defined(CONFIGURE_MAXIMUM_POSIX_SPINLOCKS)
	1720	#define CONFIGURE_MAXIMUM_POSIX_SPINLOCKS \
	1721	rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
	1722	#endif
	1723	#endif /* RTEMS_POSIX_API */
	1724	#endif /* CONFIGURE_UNLIMITED_OBJECTS */
	1725
	1726
[08bae5e6]	1727	/*
[8486081]	1728	* Default Configuration Table.
[08bae5e6]	1729	*/
	1730
	1731	#ifndef CONFIGURE_HAS_OWN_CONFIGURATION_TABLE
[8486081]	1732
[5877cc3a]	1733	#ifndef CONFIGURE_MAXIMUM_TASKS
	1734	#define CONFIGURE_MAXIMUM_TASKS 0
	1735	#endif
[08bae5e6]	1736
[b6911069]	1737	#define CONFIGURE_TASKS \
	1738	(CONFIGURE_MAXIMUM_TASKS + CONFIGURE_LIBBLOCK_TASKS)
	1739
[4cb19041]	1740	#ifndef CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS
[f2a776ac]	1741	#define CONFIGURE_NOTEPADS_ENABLED TRUE
	1742	#else
[4cb19041]	1743	#define CONFIGURE_NOTEPADS_ENABLED FALSE
[f2a776ac]	1744	#endif
	1745
[d507c037]	1746	/**
	1747	* This macro calculates the memory required for task variables.
	1748	*
	1749	* Each task variable is individually allocated from the Workspace.
	1750	* Hence, we do the multiplication on the configured size.
	1751	*
	1752	* @note Per-task variables are disabled for SMP configurations.
	1753	*/
	1754	#if defined(RTEMS_SMP)
	1755	#ifdef CONFIGURE_MAXIMUM_TASK_VARIABLES
	1756	#error "Per-Task Variables are not safe for SMP systems and disabled"
	1757	#endif
	1758	#define CONFIGURE_MAXIMUM_TASK_VARIABLES 0
	1759	#define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) 0
	1760	#else
[5877cc3a]	1761	#ifndef CONFIGURE_MAXIMUM_TASK_VARIABLES
[f2a776ac]	1762	#define CONFIGURE_MAXIMUM_TASK_VARIABLES 0
	1763	#define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) 0
	1764	#else
	1765	#define CONFIGURE_MEMORY_FOR_TASK_VARIABLES(_task_variables) \
	1766	(_task_variables) * \
	1767	_Configure_From_workspace(sizeof(rtems_task_variable_t))
[5877cc3a]	1768	#endif
[d507c037]	1769	#endif
[08bae5e6]	1770
[5877cc3a]	1771	#ifndef CONFIGURE_MAXIMUM_TIMERS
[f2a776ac]	1772	#define CONFIGURE_MAXIMUM_TIMERS 0
	1773	#define CONFIGURE_MEMORY_FOR_TIMERS(_timers) 0
	1774	#else
	1775	#define CONFIGURE_MEMORY_FOR_TIMERS(_timers) \
	1776	_Configure_Object_RAM(_timers, sizeof(Timer_Control) )
[5877cc3a]	1777	#endif
[08bae5e6]	1778
[5877cc3a]	1779	#ifndef CONFIGURE_MAXIMUM_SEMAPHORES
[f2a776ac]	1780	#define CONFIGURE_MAXIMUM_SEMAPHORES 0
	1781	#endif
	1782
[0c5beb8e]	1783	#ifdef RTEMS_NETWORKING
	1784	#define CONFIGURE_NETWORKING_SEMAPHORES 1
	1785	#else
	1786	#define CONFIGURE_NETWORKING_SEMAPHORES 0
	1787	#endif
	1788
[b2f216e1]	1789	#define CONFIGURE_SEMAPHORES \
	1790	(CONFIGURE_MAXIMUM_SEMAPHORES + CONFIGURE_LIBIO_SEMAPHORES + \
[659019e]	1791	CONFIGURE_TERMIOS_SEMAPHORES + CONFIGURE_LIBBLOCK_SEMAPHORES + \
[0c5beb8e]	1792	CONFIGURE_SEMAPHORES_FOR_FILE_SYSTEMS + \
	1793	CONFIGURE_NETWORKING_SEMAPHORES)
[b2f216e1]	1794
[f2a776ac]	1795	/*
	1796	* If there are no user or support semaphores defined, then we can assume
	1797	* that no memory need be allocated at all for semaphores.
	1798	*/
[b2f216e1]	1799	#if CONFIGURE_SEMAPHORES == 0
[f2a776ac]	1800	#define CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) 0
	1801	#else
	1802	#define CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) \
	1803	_Configure_Object_RAM(_semaphores, sizeof(Semaphore_Control) )
[5877cc3a]	1804	#endif
[08bae5e6]	1805
[5877cc3a]	1806	#ifndef CONFIGURE_MAXIMUM_MESSAGE_QUEUES
[f2a776ac]	1807	#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES 0
	1808	#define CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) 0
	1809	#else
	1810	#define CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) \
	1811	_Configure_Object_RAM(_queues, sizeof(Message_queue_Control) )
[5877cc3a]	1812	#endif
[08bae5e6]	1813
[5877cc3a]	1814	#ifndef CONFIGURE_MAXIMUM_PARTITIONS
[f2a776ac]	1815	#define CONFIGURE_MAXIMUM_PARTITIONS 0
	1816	#define CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) 0
	1817	#else
	1818	#define CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) \
	1819	_Configure_Object_RAM(_partitions, sizeof(Partition_Control) )
[5877cc3a]	1820	#endif
[08bae5e6]	1821
[5877cc3a]	1822	#ifndef CONFIGURE_MAXIMUM_REGIONS
[f2a776ac]	1823	#define CONFIGURE_MAXIMUM_REGIONS 0
	1824	#define CONFIGURE_MEMORY_FOR_REGIONS(_regions) 0
	1825	#else
	1826	#define CONFIGURE_MEMORY_FOR_REGIONS(_regions) \
	1827	_Configure_Object_RAM(_regions, sizeof(Region_Control) )
[5877cc3a]	1828	#endif
[08bae5e6]	1829
[5877cc3a]	1830	#ifndef CONFIGURE_MAXIMUM_PORTS
[f2a776ac]	1831	#define CONFIGURE_MAXIMUM_PORTS 0
	1832	#define CONFIGURE_MEMORY_FOR_PORTS(_ports) 0
	1833	#else
	1834	#define CONFIGURE_MEMORY_FOR_PORTS(_ports) \
	1835	_Configure_Object_RAM(_ports, sizeof(Dual_ported_memory_Control) )
[5877cc3a]	1836	#endif
[08bae5e6]	1837
[5877cc3a]	1838	#ifndef CONFIGURE_MAXIMUM_PERIODS
[f2a776ac]	1839	#define CONFIGURE_MAXIMUM_PERIODS 0
	1840	#define CONFIGURE_MEMORY_FOR_PERIODS(_periods) 0
	1841	#else
	1842	#define CONFIGURE_MEMORY_FOR_PERIODS(_periods) \
	1843	_Configure_Object_RAM(_periods, sizeof(Rate_monotonic_Control) )
[5877cc3a]	1844	#endif
[7fa1ce86]	1845
[5877cc3a]	1846	#ifndef CONFIGURE_MAXIMUM_BARRIERS
[f2a776ac]	1847	#define CONFIGURE_MAXIMUM_BARRIERS 0
[659019e]	1848	#endif
	1849
	1850	#define CONFIGURE_BARRIERS \
	1851	(CONFIGURE_MAXIMUM_BARRIERS + CONFIGURE_BARRIERS_FOR_FIFOS)
	1852
	1853	#if CONFIGURE_BARRIERS == 0
[f2a776ac]	1854	#define CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) 0
	1855	#else
	1856	#define CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) \
	1857	_Configure_Object_RAM(_barriers, sizeof(Barrier_Control) )
[5877cc3a]	1858	#endif
[08bae5e6]	1859
[5877cc3a]	1860	#ifndef CONFIGURE_MAXIMUM_USER_EXTENSIONS
[f2a776ac]	1861	#define CONFIGURE_MAXIMUM_USER_EXTENSIONS 0
	1862	#define CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) 0
	1863	#else
	1864	#define CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) \
	1865	_Configure_Object_RAM(_extensions, sizeof(Extension_Control) )
[5877cc3a]	1866	#endif
[08bae5e6]	1867
[5877cc3a]	1868	#ifndef CONFIGURE_MICROSECONDS_PER_TICK
	1869	#define CONFIGURE_MICROSECONDS_PER_TICK \
	1870	RTEMS_MILLISECONDS_TO_MICROSECONDS(10)
	1871	#endif
	1872
	1873	#ifndef CONFIGURE_TICKS_PER_TIMESLICE
	1874	#define CONFIGURE_TICKS_PER_TIMESLICE 50
	1875	#endif
[08bae5e6]	1876
[0451b44]	1877	/*
	1878	* Initial Extension Set
	1879	*/
	1880
	1881	#ifdef CONFIGURE_INIT
[4afd6f4]	1882	#ifdef CONFIGURE_STACK_CHECKER_ENABLED
[31bce9b]	1883	#include <rtems/stackchk.h>
[0451b44]	1884	#endif
[c3db01d0]	1885	#include <rtems/libcsupport.h>
[0451b44]	1886
[228df42]	1887	#if defined(BSP_INITIAL_EXTENSION) \|\| \
	1888	defined(CONFIGURE_INITIAL_EXTENSIONS) \|\| \
[4afd6f4]	1889	defined(CONFIGURE_STACK_CHECKER_ENABLED) \|\| \
[c3db01d0]	1890	(defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY))
[2195fd27]	1891	static const rtems_extensions_table Configuration_Initial_Extensions[] = {
[c3db01d0]	1892	#if !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)
	1893	RTEMS_NEWLIB_EXTENSION,
	1894	#endif
[4afd6f4]	1895	#if defined(CONFIGURE_STACK_CHECKER_ENABLED)
[c3db01d0]	1896	RTEMS_STACK_CHECKER_EXTENSION,
	1897	#endif
	1898	#if defined(CONFIGURE_INITIAL_EXTENSIONS)
	1899	CONFIGURE_INITIAL_EXTENSIONS,
	1900	#endif
[228df42]	1901	#if defined(BSP_INITIAL_EXTENSION)
	1902	BSP_INITIAL_EXTENSION
	1903	#endif
[c3db01d0]	1904	};
	1905
	1906	#define CONFIGURE_INITIAL_EXTENSION_TABLE Configuration_Initial_Extensions
	1907	#define CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS \
[9ed2bef]	1908	RTEMS_ARRAY_SIZE(Configuration_Initial_Extensions)
[96e6a86c]	1909	#else
[c3db01d0]	1910	#define CONFIGURE_INITIAL_EXTENSION_TABLE NULL
	1911	#define CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS 0
[96e6a86c]	1912	#endif
	1913
[9c9b62d8]	1914	#if defined(RTEMS_NEWLIB) && defined(__DYNAMIC_REENT__)
	1915	struct _reent *__getreent(void)
	1916	{
	1917	#ifdef CONFIGURE_DISABLE_NEWLIB_REENTRANCY
	1918	return _GLOBAL_REENT;
	1919	#else
	1920	return _Thread_Get_executing()->libc_reent;
	1921	#endif
	1922	}
	1923	#endif
[0451b44]	1924
[08bae5e6]	1925	#endif
	1926
[2eba45d]	1927	/*
	1928	* POSIX API Configuration Parameters
	1929	*/
	1930
[e6c87f7]	1931	/*
	1932	* POSIX Keys are available whether or not the POSIX API is enabled.
	1933	*/
	1934	#include <rtems/posix/key.h>
	1935
	1936	#ifndef CONFIGURE_MAXIMUM_POSIX_KEYS
[5c0c0cf]	1937	#define CONFIGURE_MAXIMUM_POSIX_KEYS 0
	1938	#endif
	1939
	1940	#ifndef CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS
	1941	#define CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS \
	1942	(CONFIGURE_MAXIMUM_POSIX_KEYS * \
	1943	(CONFIGURE_MAXIMUM_POSIX_THREADS + CONFIGURE_MAXIMUM_TASKS))
[e6c87f7]	1944	#endif
[2eba45d]	1945
[5c0c0cf]	1946	#define CONFIGURE_POSIX_KEYS \
	1947	(CONFIGURE_MAXIMUM_POSIX_KEYS + CONFIGURE_LIBIO_POSIX_KEYS)
	1948
[e6c87f7]	1949	#define CONFIGURE_MEMORY_FOR_POSIX_KEYS(_keys, _key_value_pairs) \
	1950	(_Configure_Object_RAM(_keys, sizeof(POSIX_Keys_Control) ) \
	1951	+ _Configure_From_workspace( \
	1952	_key_value_pairs * sizeof(POSIX_Keys_Key_value_pair)))
	1953
	1954	/*
	1955	* The rest of the POSIX threads API features are only available when
	1956	* POSIX is enabled.
	1957	*/
	1958
	1959	#ifdef RTEMS_POSIX_API
[5877cc3a]	1960	#include <sys/types.h>
	1961	#include <signal.h>
	1962	#include <limits.h>
	1963	#include <mqueue.h>
	1964	#include <rtems/posix/barrier.h>
	1965	#include <rtems/posix/cond.h>
	1966	#include <rtems/posix/mqueue.h>
	1967	#include <rtems/posix/mutex.h>
	1968	#include <rtems/posix/psignal.h>
[f9340ed7]	1969	#include <rtems/posix/pthread.h>
[5877cc3a]	1970	#include <rtems/posix/rwlock.h>
	1971	#include <rtems/posix/semaphore.h>
	1972	#include <rtems/posix/spinlock.h>
	1973	#include <rtems/posix/threadsup.h>
	1974	#include <rtems/posix/timer.h>
	1975
[f2a776ac]	1976	/**
[27f071cd]	1977	* Account for the object control structures plus the name
	1978	* of the object to be duplicated.
[f2a776ac]	1979	*/
	1980	#define _Configure_POSIX_Named_Object_RAM(_number, _size) \
	1981	_Configure_Object_RAM( (_number), _size ) + \
[e53aae2]	1982	(_Configure_Max_Objects(_number) * _Configure_From_workspace(NAME_MAX) )
[f2a776ac]	1983
[5877cc3a]	1984	#ifndef CONFIGURE_MAXIMUM_POSIX_THREADS
[6e4c01e]	1985	#define CONFIGURE_MAXIMUM_POSIX_THREADS 0
[5877cc3a]	1986	#endif
[2eba45d]	1987
[5877cc3a]	1988	#ifndef CONFIGURE_MAXIMUM_POSIX_MUTEXES
[6e4c01e]	1989	#define CONFIGURE_MAXIMUM_POSIX_MUTEXES 0
[5877cc3a]	1990	#endif
[6e4c01e]	1991	#define CONFIGURE_MEMORY_FOR_POSIX_MUTEXES(_mutexes) \
	1992	_Configure_Object_RAM(_mutexes, sizeof(POSIX_Mutex_Control) )
[2eba45d]	1993
[5877cc3a]	1994	#ifndef CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES
[6e4c01e]	1995	#define CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES 0
[5877cc3a]	1996	#endif
[6e4c01e]	1997	#define CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES(_condvars) \
	1998	_Configure_Object_RAM(_condvars, \
	1999	sizeof(POSIX_Condition_variables_Control) )
[2eba45d]	2000
[5877cc3a]	2001	#ifndef CONFIGURE_MAXIMUM_POSIX_TIMERS
[6e4c01e]	2002	#define CONFIGURE_MAXIMUM_POSIX_TIMERS 0
[5877cc3a]	2003	#endif
[6e4c01e]	2004	#define CONFIGURE_MEMORY_FOR_POSIX_TIMERS(_timers) \
	2005	_Configure_Object_RAM(_timers, sizeof(POSIX_Timer_Control) )
[0747e2d]	2006
[5877cc3a]	2007	#ifndef CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS
[6e4c01e]	2008	#define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS 0
[5877cc3a]	2009	#endif
[6e4c01e]	2010	#define CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(_queued_signals) \
	2011	_Configure_From_workspace( \
	2012	(_queued_signals) * (sizeof(POSIX_signals_Siginfo_node)) )
[eb0551f]	2013
[5877cc3a]	2014	#ifndef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES
[f2a776ac]	2015	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES 0
[ade17392]	2016	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS 0
[f2a776ac]	2017	#else
[ade17392]	2018	/* default to same number */
	2019	#ifndef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS
	2020	#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS \
	2021	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES
	2022	#endif
[5877cc3a]	2023	#endif
[be0fc099]	2024
[6e4c01e]	2025	#define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(_message_queues) \
	2026	_Configure_POSIX_Named_Object_RAM( \
	2027	_message_queues, sizeof(POSIX_Message_queue_Control) )
	2028
	2029	#define CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUE_DESCRIPTORS(_mqueue_fds) \
	2030	_Configure_Object_RAM( \
	2031	_mqueue_fds, sizeof(POSIX_Message_queue_Control_fd) )
	2032
[5877cc3a]	2033	#ifndef CONFIGURE_MAXIMUM_POSIX_SEMAPHORES
[6e4c01e]	2034	#define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES 0
[5877cc3a]	2035	#endif
[6e4c01e]	2036	#define CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES(_semaphores) \
	2037	_Configure_POSIX_Named_Object_RAM( \
	2038	_semaphores, sizeof(POSIX_Semaphore_Control) )
[be0fc099]	2039
[5877cc3a]	2040	#ifndef CONFIGURE_MAXIMUM_POSIX_BARRIERS
[6e4c01e]	2041	#define CONFIGURE_MAXIMUM_POSIX_BARRIERS 0
[5877cc3a]	2042	#endif
[6e4c01e]	2043	#define CONFIGURE_MEMORY_FOR_POSIX_BARRIERS(_barriers) \
	2044	_Configure_Object_RAM(_barriers, sizeof(POSIX_Barrier_Control) )
[7fa1ce86]	2045
[5877cc3a]	2046	#ifndef CONFIGURE_MAXIMUM_POSIX_SPINLOCKS
[6e4c01e]	2047	#define CONFIGURE_MAXIMUM_POSIX_SPINLOCKS 0
[5877cc3a]	2048	#endif
[6e4c01e]	2049	#define CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS(_spinlocks) \
	2050	_Configure_Object_RAM(_spinlocks, sizeof(POSIX_Spinlock_Control) )
[7fa1ce86]	2051
[5877cc3a]	2052	#ifndef CONFIGURE_MAXIMUM_POSIX_RWLOCKS
[6e4c01e]	2053	#define CONFIGURE_MAXIMUM_POSIX_RWLOCKS 0
[5877cc3a]	2054	#endif
[6e4c01e]	2055	#define CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS(_rwlocks) \
	2056	_Configure_Object_RAM(_rwlocks, sizeof(POSIX_RWLock_Control) )
[7fa1ce86]	2057
[5877cc3a]	2058	#ifdef CONFIGURE_POSIX_INIT_THREAD_TABLE
[be1c11ed]	2059
[5877cc3a]	2060	#ifdef CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE
[5240c71c]	2061
[5877cc3a]	2062	/*
	2063	* The user is defining their own table information and setting the
	2064	* appropriate variables for the POSIX Initialization Thread Table.
	2065	*/
[8486081]	2066
[5877cc3a]	2067	#else
[be1c11ed]	2068
[5877cc3a]	2069	#ifndef CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT
[4175abd]	2070	#define CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT POSIX_Init
[5877cc3a]	2071	#endif
[5240c71c]	2072
[5877cc3a]	2073	#ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE
[4175abd]	2074	#define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE \
[b4f635e]	2075	CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE
[5877cc3a]	2076	#endif
[adbb578]	2077
[5877cc3a]	2078	#ifdef CONFIGURE_INIT
[4175abd]	2079	posix_initialization_threads_table POSIX_Initialization_threads[] = {
	2080	{ CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT, \
	2081	CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE }
	2082	};
[5877cc3a]	2083	#endif
[2eba45d]	2084
[5877cc3a]	2085	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME \
	2086	POSIX_Initialization_threads
[8486081]	2087
[5877cc3a]	2088	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE \
[9ed2bef]	2089	RTEMS_ARRAY_SIZE(CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME)
[5240c71c]	2090
[5877cc3a]	2091	#endif /* CONFIGURE_POSIX_HAS_OWN_INIT_TASK_TABLE */
[5240c71c]	2092
[5877cc3a]	2093	#else /* CONFIGURE_POSIX_INIT_THREAD_TABLE */
[be1c11ed]	2094
[5877cc3a]	2095	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME NULL
	2096	#define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE 0
[be1c11ed]	2097
[5877cc3a]	2098	#endif
[be1c11ed]	2099
[5877cc3a]	2100	#define CONFIGURE_MEMORY_FOR_POSIX \
[a46e6b6d]	2101	( CONFIGURE_MEMORY_FOR_POSIX_MUTEXES( CONFIGURE_MAXIMUM_POSIX_MUTEXES + \
	2102	CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_MUTEXES) + \
[5877cc3a]	2103	CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES( \
[a46e6b6d]	2104	CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES + \
	2105	CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_CONDITION_VARIABLES) + \
[5877cc3a]	2106	CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS( \
[4175abd]	2107	CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS ) + \
[5877cc3a]	2108	CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES( \
[4175abd]	2109	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES ) + \
[61ae99b]	2110	CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUE_DESCRIPTORS( \
	2111	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS ) + \
[5877cc3a]	2112	CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( \
[4175abd]	2113	CONFIGURE_MAXIMUM_POSIX_SEMAPHORES ) + \
[5877cc3a]	2114	CONFIGURE_MEMORY_FOR_POSIX_BARRIERS(CONFIGURE_MAXIMUM_POSIX_BARRIERS) + \
	2115	CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS( \
[4175abd]	2116	CONFIGURE_MAXIMUM_POSIX_SPINLOCKS ) + \
[5877cc3a]	2117	CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS( \
[4175abd]	2118	CONFIGURE_MAXIMUM_POSIX_RWLOCKS ) + \
[b4f635e]	2119	CONFIGURE_MEMORY_FOR_POSIX_TIMERS( CONFIGURE_MAXIMUM_POSIX_TIMERS ) \
[5877cc3a]	2120	)
	2121	#else
[352c9b2]	2122
[5877cc3a]	2123	#define CONFIGURE_MAXIMUM_POSIX_THREADS 0
	2124	#define CONFIGURE_MEMORY_FOR_POSIX 0
[352c9b2]	2125
[5877cc3a]	2126	#endif /* RTEMS_POSIX_API */
[352c9b2]	2127
[5877cc3a]	2128	#ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE
	2129	#define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE 0
[352c9b2]	2130	#endif
	2131
[5877cc3a]	2132	/*
	2133	* This block of defines are for applications which use GNAT/RTEMS.
	2134	* GNAT implements each Ada task as a POSIX thread.
	2135	*/
	2136	#ifdef CONFIGURE_GNAT_RTEMS
[352c9b2]	2137
[5877cc3a]	2138	/**
[27f071cd]	2139	* The GNAT run-time needs something less than (10) POSIX mutexes.
	2140	* We may be able to get by with less but why bother.
[5877cc3a]	2141	*/
	2142	#define CONFIGURE_GNAT_MUTEXES 10
[352c9b2]	2143
[5877cc3a]	2144	/**
[27f071cd]	2145	* This is the maximum number of Ada tasks which can be concurrently
	2146	* in existence. Twenty (20) are required to run all tests in the
	2147	* ACATS (formerly ACVC).
[5877cc3a]	2148	*/
	2149	#ifndef CONFIGURE_MAXIMUM_ADA_TASKS
	2150	#define CONFIGURE_MAXIMUM_ADA_TASKS 20
	2151	#endif
[352c9b2]	2152
[5877cc3a]	2153	/**
	2154	* This is the number of non-Ada tasks which invoked Ada code.
	2155	*/
	2156	#ifndef CONFIGURE_MAXIMUM_FAKE_ADA_TASKS
	2157	#define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0
	2158	#endif
[352c9b2]	2159
[5877cc3a]	2160	#else
	2161	#define CONFIGURE_GNAT_MUTEXES 0
	2162	#define CONFIGURE_MAXIMUM_ADA_TASKS 0
	2163	#define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0
[352c9b2]	2164	#endif
	2165
[a46e6b6d]	2166	#ifdef CONFIGURE_ENABLE_GO
	2167
	2168	#ifndef CONFIGURE_MAXIMUM_POSIX_THREADS
	2169	#define CONFIGURE_MAXIMUM_POSIX_THREADS 1
	2170	#endif
	2171	#ifndef CONFIGURE_MAXIMUM_POSIX_MUTEXES
	2172	#define CONFIGURE_MAXIMUM_POSIX_MUTEXES 1
	2173	#endif
	2174	#ifndef CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES
	2175	#define CONFIGURE_MAXIMUM_CONDITION_VARIABLES 1
	2176	#endif
	2177
	2178	#define CONFIGURE_GO_INIT_MUTEXES 77
	2179	#define CONFIGURE_GO_INIT_CONDITION_VARIABLES 4
	2180
	2181	#ifndef CONFIGURE_MAXIMUM_GOROUTINES
	2182	#define CONFIGURE_MAXIMUM_GOROUTINES 400
	2183	#endif
	2184
	2185	#define CONFIGURE_GOROUTINES_TASK_VARIABLES \
	2186	(2 * CONFIGURE_MAXIMUM_GOROUTINES)
	2187
	2188	#ifndef CONFIGURE_MAXIMUM_GO_CHANNELS
	2189	#define CONFIGURE_MAXIMUM_GO_CHANNELS 500
	2190	#endif
	2191
	2192	#else
	2193	#define CONFIGURE_GO_INIT_MUTEXES 0
	2194	#define CONFIGURE_GO_INIT_CONDITION_VARIABLES 0
	2195	#define CONFIGURE_MAXIMUM_GOROUTINES 0
	2196	#define CONFIGURE_GOROUTINES_TASK_VARIABLES 0
	2197	#define CONFIGURE_MAXIMUM_GO_CHANNELS 0
	2198	#endif
[5aecf664]	2199
[b4f635e]	2200	/**
[27f071cd]	2201	* This is so we can account for tasks with stacks greater than minimum
	2202	* size. This is in bytes.
[b4f635e]	2203	*/
	2204	#ifndef CONFIGURE_EXTRA_TASK_STACKS
	2205	#define CONFIGURE_EXTRA_TASK_STACKS 0
	2206	#endif
[5aecf664]	2207
[94086a9]	2208	/**
	2209	* This macro provides a summation of the various POSIX thread requirements.
	2210	*/
	2211	#define CONFIGURE_POSIX_THREADS \
	2212	(CONFIGURE_MAXIMUM_POSIX_THREADS + \
	2213	CONFIGURE_MAXIMUM_ADA_TASKS + \
	2214	CONFIGURE_MAXIMUM_GOROUTINES)
	2215
[8486081]	2216	/*
[3652ad35]	2217	* Calculate the RAM size based on the maximum number of objects configured.
	2218	*/
[08bae5e6]	2219
	2220	#ifndef CONFIGURE_EXECUTIVE_RAM_SIZE
[3652ad35]	2221
[5877cc3a]	2222	/**
[27f071cd]	2223	* Account for allocating the following per object
	2224	* + array of object control structures
	2225	* + local pointer table -- pointer per object plus a zero'th
	2226	* entry in the local pointer table.
[5877cc3a]	2227	*/
[b2b143f4]	2228
[5877cc3a]	2229	#define CONFIGURE_MEMORY_FOR_TASKS(_tasks, _number_FP_tasks) \
[3df4d74]	2230	( \
[69aa3349]	2231	_Configure_Object_RAM(_tasks, sizeof(Configuration_Thread_control)) \
[3df4d74]	2232	+ _Configure_Max_Objects(_number_FP_tasks) \
	2233	* _Configure_From_workspace(CONTEXT_FP_SIZE) \
	2234	* (CONTEXT_FP_SIZE != 0) \
	2235	)
[b2b143f4]	2236
[5877cc3a]	2237	/**
[27f071cd]	2238	* This defines the amount of memory configured for the multiprocessing
	2239	* support required by this application.
[5877cc3a]	2240	*/
[df49c60]	2241	#ifdef CONFIGURE_MP_APPLICATION
[f2a776ac]	2242	#define CONFIGURE_MEMORY_FOR_MP \
	2243	(CONFIGURE_MEMORY_FOR_PROXIES(CONFIGURE_MP_MAXIMUM_PROXIES) + \
	2244	CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS( \
	2245	CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS) + \
[b4f635e]	2246	CONFIGURE_MEMORY_FOR_TASKS(1, 1) \
[3652ad35]	2247	)
	2248	#else
[f2a776ac]	2249	#define CONFIGURE_MEMORY_FOR_MP 0
[3652ad35]	2250	#endif
[3b89891]	2251
[5877cc3a]	2252	/**
[27f071cd]	2253	* The following macro is used to calculate the memory allocated by RTEMS
	2254	* for the message buffers associated with a particular message queue.
	2255	* There is a fixed amount of overhead per message.
[5877cc3a]	2256	*/
	2257	#define CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE(_messages, _size) \
	2258	_Configure_From_workspace( \
	2259	(_messages) * ((_size) + sizeof(CORE_message_queue_Buffer_control)))
	2260
	2261	/**
[27f071cd]	2262	* This macros is set to the amount of memory required for pending message
	2263	* buffers in bytes. It should be constructed by adding together a
	2264	* set of values determined by CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE.
[7042065]	2265	*/
	2266	#ifndef CONFIGURE_MESSAGE_BUFFER_MEMORY
[5877cc3a]	2267	#define CONFIGURE_MESSAGE_BUFFER_MEMORY 0
[7042065]	2268	#endif
	2269
[5877cc3a]	2270	/**
[27f071cd]	2271	* This macro is available just in case the confdefs.h file underallocates
	2272	* memory for a particular application. This lets the user add some extra
	2273	* memory in case something broken and underestimates.
[5877cc3a]	2274	*
[27f071cd]	2275	* It is also possible for cases where confdefs.h overallocates memory,
	2276	* you could substract memory from the allocated. The estimate is just
	2277	* that, an estimate, and assumes worst case alignment and padding on
	2278	* each allocated element. So in some cases it could be too conservative.
[5877cc3a]	2279	*
[27f071cd]	2280	* NOTE: Historically this was used for message buffers.
[7042065]	2281	*/
	2282	#ifndef CONFIGURE_MEMORY_OVERHEAD
[5877cc3a]	2283	#define CONFIGURE_MEMORY_OVERHEAD 0
	2284	#endif
	2285
	2286	/**
[27f071cd]	2287	* On architectures that use Simple Vectored Interrupts, it is RTEMS
	2288	* responsibility to allocate the vector table. This avoids reserving
	2289	* the memory on architectures that use the Programmable Interrupt
	2290	* Controller Vectored Interrupts.
[5877cc3a]	2291	*/
	2292	#if (CPU_SIMPLE_VECTORED_INTERRUPTS == TRUE)
	2293	/*
	2294	* This is a (hopefully) temporary hack. On the mips, the number of
	2295	* vectors is NOT statically defined. But it has to be statically
	2296	* defined for this to work. This is an issue looking for a nice
	2297	* solution.
	2298	*/
	2299	#if defined(__mips__)
[94a88c1c]	2300	#define CONFIGURE_INTERRUPT_VECTOR_TABLE \
	2301	_Configure_From_workspace( (sizeof(ISR_Handler_entry) * 256))
[5877cc3a]	2302	#else
	2303	#define CONFIGURE_INTERRUPT_VECTOR_TABLE \
[94a88c1c]	2304	_Configure_From_workspace( \
	2305	(sizeof(ISR_Handler_entry) * ISR_NUMBER_OF_VECTORS))
[5877cc3a]	2306	#endif
	2307	#else
	2308	#define CONFIGURE_INTERRUPT_VECTOR_TABLE 0
[7042065]	2309	#endif
	2310
[5877cc3a]	2311	/**
[51f823c9]	2312	* RTEMS uses two instance of an internal mutex class. This accounts
	2313	* for these mutexes.
[5877cc3a]	2314	*/
[b2b143f4]	2315	#define CONFIGURE_API_MUTEX_MEMORY \
[51f823c9]	2316	_Configure_Object_RAM(2, sizeof(API_Mutex_Control))
[b2b143f4]	2317
[06dcaf0]	2318	/**
[27f071cd]	2319	* This calculates the amount of memory reserved for the IDLE tasks.
	2320	* In an SMP system, each CPU core has its own idle task.
[4175abd]	2321	*/
[06dcaf0]	2322	#if defined(RTEMS_SMP)
[b4f635e]	2323	#define CONFIGURE_IDLE_TASKS_COUNT CONFIGURE_SMP_MAXIMUM_PROCESSORS
[06dcaf0]	2324	#else
[b4f635e]	2325	#define CONFIGURE_IDLE_TASKS_COUNT 1
[06dcaf0]	2326	#endif
[4175abd]	2327
[b4f635e]	2328	/**
[27f071cd]	2329	* This defines the formula used to compute the amount of memory
	2330	* reserved for IDLE task control structures.
[b4f635e]	2331	*/
	2332	#define CONFIGURE_MEMORY_FOR_IDLE_TASK \
	2333	CONFIGURE_MEMORY_FOR_TASKS(CONFIGURE_IDLE_TASKS_COUNT, 0)
	2334
[5877cc3a]	2335	/**
[27f071cd]	2336	* This macro accounts for general RTEMS system overhead.
[5877cc3a]	2337	*/
[df49c60]	2338	#define CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD \
[4175abd]	2339	( CONFIGURE_MEMORY_FOR_IDLE_TASK + /* IDLE and stack */ \
	2340	CONFIGURE_INTERRUPT_VECTOR_TABLE + /* interrupt vectors */ \
[5877cc3a]	2341	CONFIGURE_INTERRUPT_STACK_MEMORY + /* interrupt stack */ \
[4175abd]	2342	CONFIGURE_API_MUTEX_MEMORY /* allocation mutex */ \
[b3dcd9a2]	2343	)
	2344
[5877cc3a]	2345	/**
[27f071cd]	2346	* This macro reserves the memory required by the statically configured
	2347	* user extensions.
[5877cc3a]	2348	*/
	2349	#define CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS \
[466cf31d]	2350	(CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS == 0 ? 0 : \
	2351	_Configure_From_workspace( \
	2352	CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS \
	2353	* sizeof(User_extensions_Switch_control) \
	2354	))
[5877cc3a]	2355
	2356	/**
[27f071cd]	2357	* This macro provides a summation of the memory required by the
	2358	* Classic API as configured.
[5877cc3a]	2359	*/
	2360	#define CONFIGURE_MEMORY_FOR_CLASSIC \
[a46e6b6d]	2361	(CONFIGURE_MEMORY_FOR_TASK_VARIABLES(CONFIGURE_MAXIMUM_TASK_VARIABLES + \
	2362	CONFIGURE_GOROUTINES_TASK_VARIABLES) + \
[f0f450a]	2363	CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS + \
	2364	CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER ) + \
[b2f216e1]	2365	CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_SEMAPHORES) + \
[3652ad35]	2366	CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES) + \
	2367	CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS) + \
[e746a88]	2368	CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ) + \
[3652ad35]	2369	CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS) + \
	2370	CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS) + \
[659019e]	2371	CONFIGURE_MEMORY_FOR_BARRIERS(CONFIGURE_BARRIERS) + \
[5877cc3a]	2372	CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS) \
	2373	)
	2374
[06dcaf0]	2375	#if defined(RTEMS_SMP)
	2376	#define CONFIGURE_MEMORY_FOR_SMP \
	2377	(CONFIGURE_SMP_MAXIMUM_PROCESSORS * \
	2378	_Configure_From_workspace( CONFIGURE_INTERRUPT_STACK_SIZE ) \
	2379	)
	2380	#else
	2381	#define CONFIGURE_MEMORY_FOR_SMP 0
	2382	#endif
	2383
[5877cc3a]	2384	/**
[27f071cd]	2385	* This calculates the memory required for the executive workspace.
[5877cc3a]	2386	*/
	2387	#define CONFIGURE_EXECUTIVE_RAM_SIZE \
	2388	(( \
[df49c60]	2389	CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD + \
[5877cc3a]	2390	CONFIGURE_MEMORY_FOR_TASKS( \
[94086a9]	2391	CONFIGURE_TASKS, CONFIGURE_TASKS) + \
	2392	CONFIGURE_MEMORY_FOR_TASKS( \
	2393	CONFIGURE_POSIX_THREADS, CONFIGURE_POSIX_THREADS) + \
[5877cc3a]	2394	CONFIGURE_MEMORY_FOR_CLASSIC + \
[e6c87f7]	2395	CONFIGURE_MEMORY_FOR_POSIX_KEYS( \
[5c0c0cf]	2396	CONFIGURE_POSIX_KEYS, \
[e6c87f7]	2397	CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS ) + \
[5877cc3a]	2398	CONFIGURE_MEMORY_FOR_POSIX + \
	2399	CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS + \
	2400	CONFIGURE_MEMORY_FOR_MP + \
[06dcaf0]	2401	CONFIGURE_MEMORY_FOR_SMP + \
[7042065]	2402	CONFIGURE_MESSAGE_BUFFER_MEMORY + \
[b4f635e]	2403	(CONFIGURE_MEMORY_OVERHEAD * 1024) \
[7042065]	2404	) & ~0x7)
[b4f635e]	2405
	2406	/*
	2407	* Now account for any extra memory that initialization tasks or threads
	2408	* may have requested.
	2409	*/
	2410
	2411	/**
[27f071cd]	2412	* This accounts for any extra memory required by the Classic API
	2413	* Initialization Task.
[b4f635e]	2414	*/
	2415	#if (CONFIGURE_INIT_TASK_STACK_SIZE > CONFIGURE_MINIMUM_TASK_STACK_SIZE)
	2416	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART \
	2417	(CONFIGURE_INIT_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE)
	2418	#else
	2419	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART 0
[08bae5e6]	2420	#endif
	2421
[b4f635e]	2422	/**
[27f071cd]	2423	* This accounts for any extra memory required by the POSIX API
	2424	* Initialization Thread.
[b4f635e]	2425	*/
	2426	#if defined(RTEMS_POSIX_API) && \
	2427	(CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE > \
	2428	CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE)
	2429	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART \
	2430	(CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE - \
	2431	CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE)
	2432	#else
	2433	#define CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART 0
	2434	#endif
	2435
	2436	/**
[27f071cd]	2437	* This macro provides a summation of the various initialization task
	2438	* and thread stack requirements.
[b4f635e]	2439	*/
	2440	#define CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS \
	2441	(CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART + \
	2442	CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART)
	2443
	2444	#define CONFIGURE_IDLE_TASKS_STACK \
	2445	(CONFIGURE_IDLE_TASKS_COUNT * \
[9fa3cf0d]	2446	_Configure_From_stackspace( CONFIGURE_IDLE_TASK_STACK_SIZE ) )
[b4f635e]	2447
	2448	#define CONFIGURE_TASKS_STACK \
[b6911069]	2449	(_Configure_Max_Objects( CONFIGURE_TASKS ) * \
[9fa3cf0d]	2450	_Configure_From_stackspace( CONFIGURE_MINIMUM_TASK_STACK_SIZE ) )
[b4f635e]	2451
	2452	#define CONFIGURE_POSIX_THREADS_STACK \
	2453	(_Configure_Max_Objects( CONFIGURE_MAXIMUM_POSIX_THREADS ) * \
[9fa3cf0d]	2454	_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
[b4f635e]	2455
	2456	#define CONFIGURE_GOROUTINES_STACK \
	2457	(_Configure_Max_Objects( CONFIGURE_MAXIMUM_GOROUTINES ) * \
[9fa3cf0d]	2458	_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
[b4f635e]	2459
	2460	#define CONFIGURE_ADA_TASKS_STACK \
	2461	(_Configure_Max_Objects( CONFIGURE_MAXIMUM_ADA_TASKS ) * \
[9fa3cf0d]	2462	_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
[b4f635e]	2463
	2464	#else /* CONFIGURE_EXECUTIVE_RAM_SIZE */
	2465
	2466	#define CONFIGURE_IDLE_TASKS_STACK 0
	2467	#define CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS 0
	2468	#define CONFIGURE_TASKS_STACK 0
	2469	#define CONFIGURE_POSIX_THREADS_STACK 0
	2470	#define CONFIGURE_GOROUTINES_STACK 0
	2471	#define CONFIGURE_ADA_TASKS_STACK 0
	2472
	2473	#if CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK != 0
	2474	#error "CONFIGURE_EXECUTIVE_RAM_SIZE defined with request for CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK"
	2475	#endif
	2476
	2477	#if CONFIGURE_EXTRA_TASK_STACKS != 0
	2478	#error "CONFIGURE_EXECUTIVE_RAM_SIZE defined with request for CONFIGURE_EXTRA_TASK_STACKS"
	2479	#endif
	2480
	2481	#endif /* CONFIGURE_EXECUTIVE_RAM_SIZE */
	2482
	2483	#define CONFIGURE_STACK_SPACE_SIZE \
	2484	( \
	2485	CONFIGURE_IDLE_TASKS_STACK + \
	2486	CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS + \
	2487	CONFIGURE_TASKS_STACK + \
	2488	CONFIGURE_POSIX_THREADS_STACK + \
	2489	CONFIGURE_GOROUTINES_STACK + \
	2490	CONFIGURE_ADA_TASKS_STACK + \
	2491	CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK + \
[b6911069]	2492	CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS + \
[b4f635e]	2493	CONFIGURE_EXTRA_TASK_STACKS \
	2494	)
	2495
[08bae5e6]	2496	#ifdef CONFIGURE_INIT
[69aa3349]	2497	typedef struct {
	2498	Thread_Control Control;
	2499	#if CONFIGURE_MAXIMUM_USER_EXTENSIONS > 0
	2500	void *extensions[ CONFIGURE_MAXIMUM_USER_EXTENSIONS + 1 ];
	2501	#endif
	2502	union {
	2503	#ifdef CONFIGURE_SCHEDULER_CBS
	2504	Scheduler_CBS_Per_thread CBS;
	2505	#endif
	2506	#ifdef CONFIGURE_SCHEDULER_EDF
	2507	Scheduler_EDF_Per_thread EDF;
	2508	#endif
	2509	#if defined(CONFIGURE_SCHEDULER_PRIORITY) \
	2510	\|\| defined(CONFIGURE_SCHEDULER_PRIORITY_SMP)
	2511	Scheduler_priority_Per_thread Priority;
	2512	#endif
	2513	#ifdef CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP
	2514	Scheduler_priority_affinity_SMP_Per_thread Priority_affinity;
	2515	#endif
	2516	#ifdef CONFIGURE_SCHEDULER_USER_PER_THREAD
	2517	CONFIGURE_SCHEDULER_USER_PER_THREAD User;
	2518	#endif
	2519	} Scheduler;
	2520	RTEMS_API_Control API_RTEMS;
	2521	#ifndef CONFIGURE_DISABLE_CLASSIC_API_NOTEPADS
	2522	uint32_t Notepads[ RTEMS_NUMBER_NOTEPADS ];
	2523	#endif
	2524	#ifdef RTEMS_POSIX_API
	2525	POSIX_API_Control API_POSIX;
	2526	#endif
	2527	#if !defined(RTEMS_SCHEDSIM) \
	2528	&& defined(RTEMS_NEWLIB) \
	2529	&& !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)
	2530	struct _reent Newlib;
	2531	#else
	2532	struct { /* Empty */ } Newlib;
	2533	#endif
	2534	} Configuration_Thread_control;
	2535
	2536	const size_t _Thread_Control_size = sizeof( Configuration_Thread_control );
	2537
	2538	const Thread_Control_add_on _Thread_Control_add_ons[] = {
	2539	{
	2540	offsetof( Configuration_Thread_control, Control.scheduler_info ),
	2541	offsetof( Configuration_Thread_control, Scheduler )
	2542	}, {
	2543	offsetof(
	2544	Configuration_Thread_control,
	2545	Control.API_Extensions[ THREAD_API_RTEMS ]
	2546	),
	2547	offsetof( Configuration_Thread_control, API_RTEMS )
	2548	}, {
	2549	offsetof(
	2550	Configuration_Thread_control,
	2551	Control.libc_reent
	2552	),
	2553	offsetof( Configuration_Thread_control, Newlib )
	2554	}
	2555	#ifdef RTEMS_POSIX_API
	2556	, {
	2557	offsetof(
	2558	Configuration_Thread_control,
	2559	Control.API_Extensions[ THREAD_API_POSIX ]
	2560	),
	2561	offsetof( Configuration_Thread_control, API_POSIX )
	2562	}
	2563	#endif
	2564	};
	2565
	2566	const size_t _Thread_Control_add_on_count =
	2567	RTEMS_ARRAY_SIZE( _Thread_Control_add_ons );
	2568
[5877cc3a]	2569	/**
[27f071cd]	2570	* This is the Classic API Configuration Table.
[5877cc3a]	2571	*/
	2572	rtems_api_configuration_table Configuration_RTEMS_API = {
[b6911069]	2573	CONFIGURE_TASKS,
[4cb19041]	2574	CONFIGURE_NOTEPADS_ENABLED,
[f0f450a]	2575	CONFIGURE_MAXIMUM_TIMERS + CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER,
[b2f216e1]	2576	CONFIGURE_SEMAPHORES,
[5877cc3a]	2577	CONFIGURE_MAXIMUM_MESSAGE_QUEUES,
	2578	CONFIGURE_MAXIMUM_PARTITIONS,
	2579	CONFIGURE_MAXIMUM_REGIONS,
	2580	CONFIGURE_MAXIMUM_PORTS,
	2581	CONFIGURE_MAXIMUM_PERIODS,
[659019e]	2582	CONFIGURE_BARRIERS,
[5877cc3a]	2583	CONFIGURE_INIT_TASK_TABLE_SIZE,
	2584	CONFIGURE_INIT_TASK_TABLE
	2585	};
[e6d4b1d]	2586
[5877cc3a]	2587	#ifdef RTEMS_POSIX_API
	2588	/**
[27f071cd]	2589	* This is the POSIX API Configuration Table.
[5877cc3a]	2590	*/
	2591	posix_api_configuration_table Configuration_POSIX_API = {
[94086a9]	2592	CONFIGURE_POSIX_THREADS,
[5877cc3a]	2593	CONFIGURE_MAXIMUM_POSIX_MUTEXES + CONFIGURE_GNAT_MUTEXES +
[a46e6b6d]	2594	CONFIGURE_MAXIMUM_ADA_TASKS + CONFIGURE_MAXIMUM_FAKE_ADA_TASKS +
	2595	CONFIGURE_GO_INIT_MUTEXES + CONFIGURE_MAXIMUM_GO_CHANNELS,
[5877cc3a]	2596	CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES +
[a46e6b6d]	2597	CONFIGURE_MAXIMUM_ADA_TASKS + CONFIGURE_MAXIMUM_FAKE_ADA_TASKS +
	2598	CONFIGURE_GO_INIT_CONDITION_VARIABLES + CONFIGURE_MAXIMUM_GO_CHANNELS,
[5877cc3a]	2599	CONFIGURE_MAXIMUM_POSIX_TIMERS,
	2600	CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS,
	2601	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES,
[ade17392]	2602	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS,
[5877cc3a]	2603	CONFIGURE_MAXIMUM_POSIX_SEMAPHORES,
	2604	CONFIGURE_MAXIMUM_POSIX_BARRIERS,
	2605	CONFIGURE_MAXIMUM_POSIX_RWLOCKS,
	2606	CONFIGURE_MAXIMUM_POSIX_SPINLOCKS,
	2607	CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE,
	2608	CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME
	2609	};
	2610	#endif
[2eba45d]	2611
[6784547]	2612	/**
[27f071cd]	2613	* This variable specifies the minimum stack size for tasks in an RTEMS
	2614	* application.
[ecf0f4c]	2615	*
[27f071cd]	2616	* NOTE: This is left as a simple uint32_t so it can be externed as
	2617	* needed without requring being high enough logical to
	2618	* include the full configuration table.
[ecf0f4c]	2619	*/
[28352fae]	2620	uint32_t rtems_minimum_stack_size =
[ecf0f4c]	2621	CONFIGURE_MINIMUM_TASK_STACK_SIZE;
	2622
[6784547]	2623	/**
[27f071cd]	2624	* This variable specifies the maximum priority value that
	2625	* a task may have. This must be a power of 2 between 4
	2626	* and 256 and is specified in terms of Classic API
	2627	* priority values.
[80f9d77]	2628	*
[27f071cd]	2629	* NOTE: This is left as a simple uint8_t so it can be externed as
	2630	* needed without requring being high enough logical to
	2631	* include the full configuration table.
[80f9d77]	2632	*/
	2633	uint8_t rtems_maximum_priority = CONFIGURE_MAXIMUM_PRIORITY;
	2634
[5877cc3a]	2635	/**
[27f071cd]	2636	* This is the primary Configuration Table for this application.
[5877cc3a]	2637	*/
[ae4f125e]	2638	const rtems_configuration_table Configuration = {
[5877cc3a]	2639	CONFIGURE_EXECUTIVE_RAM_SIZE, /* required RTEMS workspace */
[b4f635e]	2640	CONFIGURE_STACK_SPACE_SIZE, /* required stack space */
[5877cc3a]	2641	CONFIGURE_MAXIMUM_USER_EXTENSIONS, /* maximum dynamic extensions */
[5c0c0cf]	2642	CONFIGURE_POSIX_KEYS, /* POSIX keys are always */
[e6c87f7]	2643	CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS, /* enabled */
[5877cc3a]	2644	CONFIGURE_MICROSECONDS_PER_TICK, /* microseconds per clock tick */
[50fc8f6]	2645	1000 * CONFIGURE_MICROSECONDS_PER_TICK, /* nanoseconds per clock tick */
[5877cc3a]	2646	CONFIGURE_TICKS_PER_TIMESLICE, /* ticks per timeslice quantum */
	2647	CONFIGURE_IDLE_TASK_BODY, /* user's IDLE task */
	2648	CONFIGURE_IDLE_TASK_STACK_SIZE, /* IDLE task stack size */
	2649	CONFIGURE_INTERRUPT_STACK_SIZE, /* interrupt stack size */
[9fa3cf0d]	2650	CONFIGURE_TASK_STACK_ALLOCATOR_INIT, /* stack allocator init */
[5877cc3a]	2651	CONFIGURE_TASK_STACK_ALLOCATOR, /* stack allocator */
	2652	CONFIGURE_TASK_STACK_DEALLOCATOR, /* stack deallocator */
	2653	CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY, /* true to clear memory */
[b4f635e]	2654	#ifdef CONFIGURE_UNIFIED_WORK_AREAS /* true for unified work areas */
	2655	true,
	2656	#else
	2657	false,
	2658	#endif
	2659	#ifdef CONFIGURE_TASK_STACK_ALLOCATOR_AVOIDS_WORK_SPACE /* true to avoid
	2660	work space for thread stack
	2661	allocation */
	2662	true,
	2663	#else
	2664	false,
	2665	#endif
[f913c79]	2666	#ifdef RTEMS_SMP
	2667	#ifdef CONFIGURE_SMP_APPLICATION
	2668	true,
	2669	#else
	2670	false,
	2671	#endif
	2672	#endif
[5877cc3a]	2673	CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS, /* number of static extensions */
	2674	CONFIGURE_INITIAL_EXTENSION_TABLE, /* pointer to static extensions */
	2675	#if defined(RTEMS_MULTIPROCESSING)
	2676	CONFIGURE_MULTIPROCESSING_TABLE, /* pointer to MP config table */
	2677	#endif
[6c2eedc]	2678	#ifdef RTEMS_SMP
[e1598a6]	2679	CONFIGURE_SMP_MAXIMUM_PROCESSORS,
[6c2eedc]	2680	#endif
[5877cc3a]	2681	};
[08bae5e6]	2682	#endif
	2683
	2684	#endif /* CONFIGURE_HAS_OWN_CONFIGURATION_TABLE */
	2685
[06dcaf0]	2686	#if defined(RTEMS_SMP)
	2687	/*
	2688	* Instantiate the Per CPU information based upon the user configuration.
	2689	*/
	2690	#if defined(CONFIGURE_INIT)
[c236082]	2691	Per_CPU_Control_envelope _Per_CPU_Information[CONFIGURE_SMP_MAXIMUM_PROCESSORS];
[06dcaf0]	2692	#endif
	2693
	2694	#endif
	2695
[0ab34c90]	2696	/*
	2697	* If the user has configured a set of Classic API Initialization Tasks,
	2698	* then we need to install the code that runs that loop.
	2699	*/
	2700	#ifdef CONFIGURE_INIT
[d15bae6]	2701	#if defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) \|\| \
	2702	defined(CONFIGURE_HAS_OWN_INIT_TASK_TABLE)
[0ab34c90]	2703	void (*_RTEMS_tasks_Initialize_user_tasks_p)(void) =
	2704	_RTEMS_tasks_Initialize_user_tasks_body;
	2705	#else
	2706	void (*_RTEMS_tasks_Initialize_user_tasks_p)(void) = NULL;
	2707	#endif
	2708	#endif
	2709
	2710	/*
	2711	* If the user has configured a set of POSIX Initialization Threads,
	2712	* then we need to install the code that runs that loop.
	2713	*/
[5a8bc44]	2714	#ifdef RTEMS_POSIX_API
	2715	#ifdef CONFIGURE_INIT
[d15bae6]	2716	#if defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) \|\| \
	2717	defined(CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE)
[28352fae]	2718	void (*_POSIX_Threads_Initialize_user_threads_p)(void) =
[4175abd]	2719	_POSIX_Threads_Initialize_user_threads_body;
[5a8bc44]	2720	#else
	2721	void (*_POSIX_Threads_Initialize_user_threads_p)(void) = NULL;
	2722	#endif
[0ab34c90]	2723	#endif
	2724	#endif
	2725
[08bae5e6]	2726	#ifdef __cplusplus
	2727	}
	2728	#endif
[8486081]	2729
[df0bfdf]	2730	/******************************************************************
	2731	******************************************************************
	2732	******************************************************************
	2733	* CONFIGURATION WARNINGS AND ERROR CHECKING *
	2734	******************************************************************
	2735	******************************************************************
	2736	******************************************************************
[df49c60]	2737	*/
	2738
[b4f635e]	2739	#if defined(CONFIGURE_CONFDEFS_DEBUG) && defined(CONFIGURE_INIT)
	2740	/**
[27f071cd]	2741	* This is a debug mechanism, so if you need to, the executable will
	2742	* have a structure with various partial values. Add to this as you
	2743	* need to. Viewing this structure in gdb combined with dumping
	2744	* the Configuration structures generated should help a lot in tracing
	2745	* down errors and analyzing where over and under allocations are.
[b4f635e]	2746	*/
	2747	typedef struct {
	2748	uint32_t SYSTEM_OVERHEAD;
	2749	uint32_t STATIC_EXTENSIONS;
	2750	uint32_t INITIALIZATION_THREADS_STACKS;
	2751
	2752	uint32_t PER_INTEGER_TASK;
	2753	uint32_t FP_OVERHEAD;
	2754	uint32_t CLASSIC;
	2755	uint32_t POSIX;
	2756
	2757	/* System overhead pieces */
	2758	uint32_t INTERRUPT_VECTOR_TABLE;
	2759	uint32_t INTERRUPT_STACK_MEMORY;
	2760	uint32_t MEMORY_FOR_IDLE_TASK;
	2761
	2762	/* Classic API Pieces */
	2763	uint32_t CLASSIC_TASKS;
	2764	uint32_t TASK_VARIABLES;
	2765	uint32_t TIMERS;
	2766	uint32_t SEMAPHORES;
	2767	uint32_t MESSAGE_QUEUES;
	2768	uint32_t PARTITIONS;
	2769	uint32_t REGIONS;
	2770	uint32_t PORTS;
	2771	uint32_t PERIODS;
	2772	uint32_t BARRIERS;
	2773	uint32_t USER_EXTENSIONS;
	2774
[e6c87f7]	2775	/* POSIX API managers that are always enabled */
	2776	uint32_t POSIX_KEYS;
	2777
[b4f635e]	2778	#ifdef RTEMS_POSIX_API
	2779	/* POSIX API Pieces */
	2780	uint32_t POSIX_MUTEXES;
	2781	uint32_t POSIX_CONDITION_VARIABLES;
	2782	uint32_t POSIX_TIMERS;
	2783	uint32_t POSIX_QUEUED_SIGNALS;
	2784	uint32_t POSIX_MESSAGE_QUEUES;
	2785	uint32_t POSIX_SEMAPHORES;
	2786	uint32_t POSIX_BARRIERS;
	2787	uint32_t POSIX_SPINLOCKS;
	2788	uint32_t POSIX_RWLOCKS;
	2789	#endif
	2790
	2791	/* Stack space sizes */
	2792	uint32_t IDLE_TASKS_STACK;
	2793	uint32_t INITIALIZATION_THREADS_EXTRA_STACKS;
	2794	uint32_t TASKS_STACK;
	2795	uint32_t POSIX_THREADS_STACK;
	2796	uint32_t GOROUTINES_STACK;
	2797	uint32_t ADA_TASKS_STACK;
	2798	uint32_t EXTRA_MPCI_RECEIVE_SERVER_STACK;
	2799	uint32_t EXTRA_TASK_STACKS;
	2800	} Configuration_Debug_t;
	2801
	2802	Configuration_Debug_t Configuration_Memory_Debug = {
	2803	/* General Information */
	2804	CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD,
	2805	CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS,
	2806	CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS,
	2807	CONFIGURE_MEMORY_FOR_TASKS(1, 0),
	2808	CONFIGURE_MEMORY_FOR_TASKS(0, 1),
	2809	CONFIGURE_MEMORY_FOR_CLASSIC,
	2810	CONFIGURE_MEMORY_FOR_POSIX,
	2811
	2812	/* System overhead pieces */
	2813	CONFIGURE_INTERRUPT_VECTOR_TABLE,
	2814	CONFIGURE_INTERRUPT_STACK_MEMORY,
	2815	CONFIGURE_MEMORY_FOR_IDLE_TASK,
	2816
	2817	/* Classic API Pieces */
	2818	CONFIGURE_MEMORY_FOR_TASKS(CONFIGURE_MAXIMUM_TASKS, 0),
	2819	CONFIGURE_MEMORY_FOR_TASK_VARIABLES(CONFIGURE_MAXIMUM_TASK_VARIABLES +
	2820	CONFIGURE_GOROUTINES_TASK_VARIABLES),
	2821	CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS),
	2822	CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_SEMAPHORES),
	2823	CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES),
	2824	CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS),
	2825	CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ),
	2826	CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS),
	2827	CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS),
	2828	CONFIGURE_MEMORY_FOR_BARRIERS(CONFIGURE_BARRIERS),
	2829	CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS),
[5c0c0cf]	2830	CONFIGURE_MEMORY_FOR_POSIX_KEYS( CONFIGURE_POSIX_KEYS, \
[e6c87f7]	2831	CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS ),
[b4f635e]	2832
	2833	#ifdef RTEMS_POSIX_API
	2834	/* POSIX API Pieces */
	2835	CONFIGURE_MEMORY_FOR_POSIX_MUTEXES( CONFIGURE_MAXIMUM_POSIX_MUTEXES +
	2836	CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_MUTEXES),
	2837	CONFIGURE_MEMORY_FOR_POSIX_CONDITION_VARIABLES(
	2838	CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES +
	2839	CONFIGURE_MAXIMUM_GO_CHANNELS + CONFIGURE_GO_INIT_CONDITION_VARIABLES),
	2840	CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(
	2841	CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS ),
	2842	CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(
	2843	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES ),
	2844	CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( CONFIGURE_MAXIMUM_POSIX_SEMAPHORES ),
	2845	CONFIGURE_MEMORY_FOR_POSIX_BARRIERS( CONFIGURE_MAXIMUM_POSIX_BARRIERS ),
	2846	CONFIGURE_MEMORY_FOR_POSIX_SPINLOCKS( CONFIGURE_MAXIMUM_POSIX_SPINLOCKS ),
	2847	CONFIGURE_MEMORY_FOR_POSIX_RWLOCKS( CONFIGURE_MAXIMUM_POSIX_RWLOCKS ),
	2848	CONFIGURE_MEMORY_FOR_POSIX_TIMERS( CONFIGURE_MAXIMUM_POSIX_TIMERS ),
	2849	#endif
	2850
	2851	/* Stack space sizes */
	2852	CONFIGURE_IDLE_TASKS_STACK,
	2853	CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS,
	2854	CONFIGURE_TASKS_STACK,
	2855	CONFIGURE_POSIX_THREADS_STACK,
	2856	CONFIGURE_GOROUTINES_STACK,
	2857	CONFIGURE_ADA_TASKS_STACK,
	2858	CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK,
	2859	CONFIGURE_EXTRA_TASK_STACKS
	2860	};
	2861	#endif
	2862
[df49c60]	2863	/*
[80f9d77]	2864	* Make sure a task/thread of some sort is configured.
	2865	*
	2866	* When analyzing RTEMS to find the smallest possible of memory
	2867	* that must be allocated, you probably do want to configure 0
	2868	* tasks/threads so there is a smaller set of calls to _Workspace_Allocate
	2869	* to analyze.
	2870	*/
	2871	#if !defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION)
	2872	#if (CONFIGURE_MAXIMUM_TASKS == 0) && \
	2873	(CONFIGURE_MAXIMUM_POSIX_THREADS == 0) && \
[a46e6b6d]	2874	(CONFIGURE_MAXIMUM_ADA_TASKS == 0) && \
	2875	(CONFIGURE_MAXIMUM_GOROUTINES == 0)
[80f9d77]	2876	#error "CONFIGURATION ERROR: No tasks or threads configured!!"
	2877	#endif
[df49c60]	2878	#endif
	2879
[5aecf664]	2880	#ifndef RTEMS_SCHEDSIM
[df49c60]	2881	/*
	2882	* Make sure at least one of the initialization task/thread
	2883	* tables was defined.
	2884	*/
	2885	#if !defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) && \
	2886	!defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) && \
[80f9d77]	2887	!defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION)
[168ba07]	2888	#error "CONFIGURATION ERROR: No initialization tasks or threads configured!!"
[df49c60]	2889	#endif
[5aecf664]	2890	#endif
[df49c60]	2891
[df0bfdf]	2892	/*
	2893	* If the user is trying to configure a multiprocessing application and
	2894	* RTEMS was not configured and built multiprocessing, then error out.
	2895	*/
	2896	#if defined(CONFIGURE_MP_APPLICATION) && \
	2897	!defined(RTEMS_MULTIPROCESSING)
	2898	#error "CONFIGURATION ERROR: RTEMS not configured for multiprocessing!!"
	2899	#endif
	2900
	2901	/*
	2902	* If an attempt was made to configure POSIX objects and
	2903	* the POSIX API was not configured into RTEMS, error out.
[e6c87f7]	2904	*
[c9a0a10]	2905	* @note POSIX Keys are always available so the parameters
[e6c87f7]	2906	* CONFIGURE_MAXIMUM_POSIX_KEYS and
	2907	* CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS are not in this list.
[df0bfdf]	2908	*/
	2909	#if !defined(RTEMS_POSIX_API)
	2910	#if ((CONFIGURE_MAXIMUM_POSIX_THREADS != 0) \|\| \
	2911	(CONFIGURE_MAXIMUM_POSIX_MUTEXES != 0) \|\| \
	2912	(CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES != 0) \|\| \
	2913	(CONFIGURE_MAXIMUM_POSIX_TIMERS != 0) \|\| \
	2914	(CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS != 0) \|\| \
	2915	(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES != 0) \|\| \
[ade17392]	2916	(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS != 0) \|\| \
[df0bfdf]	2917	(CONFIGURE_MAXIMUM_POSIX_SEMAPHORES != 0) \|\| \
	2918	(CONFIGURE_MAXIMUM_POSIX_BARRIERS != 0) \|\| \
	2919	(CONFIGURE_MAXIMUM_POSIX_SPINLOCKS != 0) \|\| \
	2920	(CONFIGURE_MAXIMUM_POSIX_RWLOCKS != 0) \|\| \
[98e92b0a]	2921	defined(CONFIGURE_POSIX_INIT_THREAD_TABLE))
[df0bfdf]	2922	#error "CONFIGURATION ERROR: POSIX API support not configured!!"
	2923	#endif
	2924	#endif
	2925
[6784547]	2926	#if !defined(RTEMS_SCHEDSIM)
	2927	#if !defined(CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE)
	2928	/*
	2929	* You must either explicity include or exclude the clock driver.
	2930	* It is such a common newbie error to leave it out. Maybe this
	2931	* will put an end to it.
	2932	*
	2933	* NOTE: If you are using the timer driver, it is considered
	2934	* mutually exclusive with the clock driver because the
	2935	* drivers are assumed to use the same "timer" hardware
	2936	* on many boards.
	2937	*/
	2938	#if !defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \
	2939	!defined(CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER) && \
	2940	!defined(CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER)
	2941	#error "CONFIGURATION ERROR: Do you want the clock driver or not?!?"
	2942	#endif
	2943
	2944	/*
	2945	* Only one of the following three configuration parameters should be
	2946	* defined at a time.
	2947	*/
	2948	#if ((defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) + \
	2949	defined(CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER) + \
	2950	defined(CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER)) > 1)
	2951	#error "CONFIGURATION ERROR: More than one clock/timer driver configuration parameter specified?!?"
	2952	#endif
	2953	#endif /* !defined(CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE) */
	2954	#endif /* !defined(RTEMS_SCHEDSIM) */
[df0bfdf]	2955
[0ab34c90]	2956	/*
	2957	* These names have been obsoleted so make the user application stop compiling
	2958	*/
	2959	#if defined(CONFIGURE_TEST_NEEDS_TIMER_DRIVER) \|\| \
	2960	defined(CONFIGURE_TEST_NEEDS_CONSOLE_DRIVER) \|\| \
	2961	defined(CONFIGURE_TEST_NEEDS_CLOCK_DRIVER) \|\| \
	2962	defined(CONFIGURE_TEST_NEEDS_RTC_DRIVER) \|\| \
	2963	defined(CONFIGURE_TEST_NEEDS_STUB_DRIVER)
	2964	#error "CONFIGURATION ERROR: CONFIGURE_TEST_XXX constants are obsolete"
	2965	#endif
	2966
[80f9d77]	2967	/*
	2968	* Validate the configured maximum priority
	2969	*/
	2970	#if ((CONFIGURE_MAXIMUM_PRIORITY != 3) && \
	2971	(CONFIGURE_MAXIMUM_PRIORITY != 7) && \
	2972	(CONFIGURE_MAXIMUM_PRIORITY != 15) && \
	2973	(CONFIGURE_MAXIMUM_PRIORITY != 31) && \
	2974	(CONFIGURE_MAXIMUM_PRIORITY != 63) && \
	2975	(CONFIGURE_MAXIMUM_PRIORITY != 127) && \
	2976	(CONFIGURE_MAXIMUM_PRIORITY != 255))
	2977	#error "Maximum priority is not 1 less than a power of 2 between 4 and 256"
	2978	#endif
[28352fae]	2979
[80f9d77]	2980	#if (CONFIGURE_MAXIMUM_PRIORITY > PRIORITY_DEFAULT_MAXIMUM)
	2981	#error "Maximum priority configured higher than supported by target."
	2982	#endif
	2983
[ade17392]	2984	/*
	2985	* If you have fewer POSIX Message Queue Descriptors than actual
	2986	* POSIX Message Queues, then you will not be able to open all the
	2987	* queues.
	2988	*/
	2989	#if (CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS < \
	2990	CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES)
	2991	#error "Fewer POSIX Message Queue descriptors than Queues!"
	2992	#endif
	2993
[b5c9064]	2994	/*
	2995	* POSIX Key pair shouldn't be less than POSIX Key, which is highly
	2996	* likely to be error.
	2997	*/
[e6c87f7]	2998	#if (CONFIGURE_MAXIMUM_POSIX_KEYS != 0) && \
	2999	(CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS != 0)
	3000	#if (CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS < CONFIGURE_MAXIMUM_POSIX_KEYS)
	3001	#error "Fewer POSIX Key pairs than POSIX Key!"
	3002	#endif
[b5c9064]	3003	#endif
	3004
[08bae5e6]	3005	#endif
	3006	/* end of include file */

Note: See TracBrowser for help on using the repository browser.

Download in other formats: