source: rtems/cpukit/pppd/pppd.h @ 4bf1801

4.104.114.84.9
Last change on this file since 4bf1801 was d0950ad, checked in by Joel Sherrill <joel.sherrill@…>, on Nov 30, 1999 at 10:12:50 PM

Added port of ppp-2.3.5 from Tomasz Domin <dot@…> of ComArch? SA.
Tomasz only tested this on the mpc823.

The official site for the original source for this PPP implementation is:

ftp://cs.anu.edu.au/pub/software/ppp

NOTE: As of 11/30/1999, the current version of this source is 2.3.10.

  • Property mode set to 100644
File size: 17.5 KB
Line 
1/*
2 * pppd.h - PPP daemon global declarations.
3 *
4 * Copyright (c) 1989 Carnegie Mellon University.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms are permitted
8 * provided that the above copyright notice and this paragraph are
9 * duplicated in all such forms and that any documentation,
10 * advertising materials, and other materials related to such
11 * distribution and use acknowledge that the software was developed
12 * by Carnegie Mellon University.  The name of the
13 * University may not be used to endorse or promote products derived
14 * from this software without specific prior written permission.
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
17 * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
18 *
19 * $Id$
20 */
21
22/*
23 * TODO:
24 */
25
26#ifndef __PPPD_H__
27#define __PPPD_H__
28
29#include <stdio.h>              /* for FILE */
30#include <sys/param.h>          /* for MAXPATHLEN and BSD4_4, if defined */
31#include <sys/types.h>          /* for u_int32_t, if defined */
32#include <sys/time.h>           /* for struct timeval */
33#include <net/ppp_defs.h>
34
35#if __STDC__
36#include <stdarg.h>
37#define __V(x)  x
38#else
39#include <varargs.h>
40#define __V(x)  (va_alist) va_dcl
41#define const
42#endif
43
44/*
45 * Limits.
46 */
47
48#define NUM_PPP         1       /* One PPP interface supported (per process) */
49#define MAXWORDLEN      1024    /* max length of word in file (incl null) */
50#define MAXARGS         1       /* max # args to a command */
51#define MAXNAMELEN      256     /* max length of hostname or name for auth */
52#define MAXSECRETLEN    256     /* max length of password or secret */
53
54/*
55 * Global variables.
56 */
57
58extern int      hungup;         /* Physical layer has disconnected */
59extern int      interfunit;             /* Interface unit number */
60extern char     ifname[];       /* Interface name */
61extern int      ttyfd;          /* Serial device file descriptor */
62extern char     hostname[];     /* Our hostname */
63extern u_char   outpacket_buf[]; /* Buffer for outgoing packets */
64extern int      phase;          /* Current state of link - see values below */
65extern int      baud_rate;      /* Current link speed in bits/sec */
66extern char     *progname;      /* Name of this program */
67extern int      redirect_stderr;/* Connector's stderr should go to file */
68extern char     peer_authname[];/* Authenticated name of peer */
69extern int      privileged;     /* We were run by real-uid root */
70extern int      need_holdoff;   /* Need holdoff period after link terminates */
71extern char     **script_env;   /* Environment variables for scripts */
72extern int      detached;       /* Have detached from controlling tty */
73
74/*
75 * Variables set by command-line options.
76 */
77
78extern int      debug;          /* Debug flag */
79extern int      kdebugflag;     /* Tell kernel to print debug messages */
80extern int      default_device; /* Using /dev/tty or equivalent */
81extern char     devnam[];       /* Device name */
82extern int      crtscts;        /* Use hardware flow control */
83extern int      modem;          /* Use modem control lines */
84extern int      inspeed;        /* Input/Output speed requested */
85extern u_int32_t netmask;       /* IP netmask to set on interface */
86extern int      lockflag;       /* Create lock file to lock the serial dev */
87extern int      nodetach;       /* Don't detach from controlling tty */
88extern char     *connector[];   /* Script to establish physical link */
89extern char     *disconnector[];        /* Script to disestablish physical link */
90extern char     *welcomer[];    /* Script to welcome client after connection */
91extern int      maxconnect;     /* Maximum connect time (seconds) */
92extern char     user[];         /* Our name for authenticating ourselves */
93extern char     passwd[];       /* Password for PAP */
94extern int      auth_required;  /* Peer is required to authenticate */
95extern int      proxyarp;       /* Set up proxy ARP entry for peer */
96extern int      persist;        /* Reopen link after it goes down */
97extern int      uselogin;       /* Use /etc/passwd for checking PAP */
98extern int      lcp_echo_interval; /* Interval between LCP echo-requests */
99extern int      lcp_echo_fails; /* Tolerance to unanswered echo-requests */
100extern char     our_name[];     /* Our name for authentication purposes */
101extern char     remote_name[];  /* Peer's name for authentication */
102extern int      explicit_remote;/* remote_name specified with remotename opt */
103extern int      usehostname;    /* Use hostname for our_name */
104extern int      disable_defaultip; /* Don't use hostname for default IP adrs */
105extern int      demand;         /* Do dial-on-demand */
106extern char     *ipparam;       /* Extra parameter for ip up/down scripts */
107extern int      cryptpap;       /* Others' PAP passwords are encrypted */
108extern int      idle_time_limit;/* Shut down link if idle for this long */
109extern int      holdoff;        /* Dead time before restarting */
110extern int      refuse_pap;     /* Don't wanna auth. ourselves with PAP */
111extern int      refuse_chap;    /* Don't wanna auth. ourselves with CHAP */
112#ifdef PPP_FILTER
113extern struct   bpf_program pass_filter;   /* Filter for pkts to pass */
114extern struct   bpf_program active_filter; /* Filter for link-active pkts */
115#endif
116
117
118#ifdef MSLANMAN
119extern int      ms_lanman;      /* Nonzero if use LanMan password instead of NT */
120                                /* Has meaning only with MS-CHAP challenges */
121#endif
122
123/*
124 * Values for phase.
125 */
126#define PHASE_DEAD              0
127#define PHASE_INITIALIZE        1
128#define PHASE_DORMANT           2
129#define PHASE_ESTABLISH         3
130#define PHASE_AUTHENTICATE      4
131#define PHASE_CALLBACK          5
132#define PHASE_NETWORK           6
133#define PHASE_TERMINATE         7
134#define PHASE_HOLDOFF           8
135
136/*
137 * The following struct gives the addresses of procedures to call
138 * for a particular protocol.
139 */
140struct protent {
141    u_short protocol;           /* PPP protocol number */
142    /* Initialization procedure */
143    void (*init) __P((int unit));
144    /* Process a received packet */
145    void (*input) __P((int unit, u_char *pkt, int len));
146    /* Process a received protocol-reject */
147    void (*protrej) __P((int unit));
148    /* Lower layer has come up */
149    void (*lowerup) __P((int unit));
150    /* Lower layer has gone down */
151    void (*lowerdown) __P((int unit));
152    /* Open the protocol */
153    void (*open) __P((int unit));
154    /* Close the protocol */
155    void (*close) __P((int unit, char *reason));
156    /* Print a packet in readable form */
157    int  (*printpkt) __P((u_char *pkt, int len,
158                          void (*printer) __P((void *, char *, ...)),
159                          void *arg));
160    /* Process a received data packet */
161    void (*datainput) __P((int unit, u_char *pkt, int len));
162    int  enabled_flag;          /* 0 iff protocol is disabled */
163    char *name;                 /* Text name of protocol */
164    /* Check requested options, assign defaults */
165    void (*check_options) __P((void));
166    /* Configure interface for demand-dial */
167    int  (*demand_conf) __P((int unit));
168    /* Say whether to bring up link for this pkt */
169    int  (*active_pkt) __P((u_char *pkt, int len));
170};
171
172/* Table of pointers to supported protocols */
173extern struct protent *protocols[];
174
175/*
176 * Prototypes.
177 */
178
179/* Procedures exported from main.c. */
180void detach __P((void));        /* Detach from controlling tty */
181void die __P((int));            /* Cleanup and exit */
182void quit __P((void));          /* like die(1) */
183void novm __P((char *));        /* Say we ran out of memory, and die */
184void my_timeout __P((void (*func)(void *), void *arg, int t));
185                                /* Call func(arg) after t seconds */
186void untimeout __P((void (*func)(void *), void *arg));
187                                /* Cancel call to func(arg) */
188int run_program __P((char *prog, char **args, int must_exist));
189                                /* Run program prog with args in child */
190void demuxprotrej __P((int, int));
191                                /* Demultiplex a Protocol-Reject */
192void format_packet __P((u_char *, int, void (*) (void *, char *, ...),
193                void *));       /* Format a packet in human-readable form */
194void log_packet __P((u_char *, int, char *, int));
195                                /* Format a packet and log it with syslog */
196void print_string __P((char *, int,  void (*) (void *, char *, ...),
197                void *));       /* Format a string for output */
198int fmtmsg __P((char *, int, char *, ...));             /* sprintf++ */
199int vfmtmsg __P((char *, int, char *, va_list));        /* vsprintf++ */
200void script_setenv __P((char *, char *));       /* set script env var */
201void script_unsetenv __P((char *));             /* unset script env var */
202/* My procedures */
203int connect_stb();
204int disconnect_stb();
205int pppdmain(int, char*[]);
206int chatmain(char*);
207
208/* Procedures exported from auth.c */
209
210void link_required __P((int));    /* we are starting to use the link */
211void link_terminated __P((int));  /* we are finished with the link */
212void link_down __P((int));        /* the LCP layer has left the Opened state */
213void link_established __P((int)); /* the link is up; authenticate now */
214void np_up __P((int, int));       /* a network protocol has come up */
215void np_down __P((int, int));     /* a network protocol has gone down */
216void np_finished __P((int, int)); /* a network protocol no longer needs link */
217void auth_peer_fail __P((int, int));
218                                /* peer failed to authenticate itself */
219void auth_peer_success __P((int, int, char *, int));
220                                /* peer successfully authenticated itself */
221void auth_withpeer_fail __P((int, int));
222                                /* we failed to authenticate ourselves */
223void auth_withpeer_success __P((int, int));
224                                /* we successfully authenticated ourselves */
225void auth_check_options __P((void));
226                                /* check authentication options supplied */
227void auth_reset __P((int));     /* check what secrets we have */
228int  check_passwd __P((int, char *, int, char *, int, char **, int *));
229                                /* Check peer-supplied username/password */
230int  get_secret __P((int, char *, char *, char *, int *, int));
231                                /* get "secret" for chap */
232int  auth_ip_addr __P((int, u_int32_t));
233                                /* check if IP address is authorized */
234int  bad_ip_adrs __P((u_int32_t));
235                                /* check if IP address is unreasonable */
236void check_access __P((FILE *, char *));
237                                /* check permissions on secrets file */
238
239/* Procedures exported from demand.c */
240void demand_conf __P((void));   /* config interface(s) for demand-dial */
241void demand_block __P((void));  /* set all NPs to queue up packets */
242void demand_unblock __P((void)); /* set all NPs to pass packets */
243void demand_discard __P((void)); /* set all NPs to discard packets */
244void demand_rexmit __P((int));  /* retransmit saved frames for an NP */
245int  loop_chars __P((unsigned char *, int)); /* process chars from loopback */
246int  loop_frame __P((unsigned char *, int)); /* process frame from loopback */
247
248/* Procedures exported from sys-*.c */
249void sys_init __P((void));      /* Do system-dependent initialization */
250void sys_cleanup __P((void));   /* Restore system state before exiting */
251void sys_check_options __P((void)); /* Check options specified */
252void sys_close __P((void));     /* Clean up in a child before execing */
253int  ppp_available __P((void)); /* Test whether ppp kernel support exists */
254void open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */
255void establish_ppp __P((int));  /* Turn serial port into a ppp interface */
256void restore_loop __P((void));  /* Transfer ppp unit back to loopback */
257void disestablish_ppp __P((int)); /* Restore port to normal operation */
258void clean_check __P((void));   /* Check if line was 8-bit clean */
259void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */
260void restore_tty __P((int));    /* Restore port's original parameters */
261void setdtr __P((int, int));    /* Raise or lower port's DTR line */
262void output __P((int, u_char *, int)); /* Output a PPP packet */
263void wait_input __P((struct timeval *));
264                                /* Wait for input, with timeout */
265void wait_loop_output __P((struct timeval *));
266                                /* Wait for pkt from loopback, with timeout */
267void wait_time __P((struct timeval *)); /* Wait for given length of time */
268int  read_packet __P((u_char *)); /* Read PPP packet */
269int  get_loop_output __P((void)); /* Read pkts from loopback */
270void ppp_send_config __P((int, int, u_int32_t, int, int));
271                                /* Configure i/f transmit parameters */
272void ppp_set_xaccm __P((int, ext_accm));
273                                /* Set extended transmit ACCM */
274void ppp_recv_config __P((int, int, u_int32_t, int, int));
275                                /* Configure i/f receive parameters */
276int  ccp_test __P((int, u_char *, int, int));
277                                /* Test support for compression scheme */
278void ccp_flags_set __P((int, int, int));
279                                /* Set kernel CCP state */
280int  ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */
281int  get_idle_time __P((int, struct ppp_idle *));
282                                /* Find out how long link has been idle */
283int  sifvjcomp __P((int, int, int, int));
284                                /* Configure VJ TCP header compression */
285int  sifup __P((int));          /* Configure i/f up (for IP) */
286int  sifnpmode __P((int u, int proto, enum NPmode mode));
287                                /* Set mode for handling packets for proto */
288int  sifdown __P((int));        /* Configure i/f down (for IP) */
289int  sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t));
290                                /* Configure IP addresses for i/f */
291int  cifaddr __P((int, u_int32_t, u_int32_t));
292                                /* Reset i/f IP addresses */
293int  sifdefaultroute __P((int, u_int32_t, u_int32_t));
294                                /* Create default route through i/f */
295int  cifdefaultroute __P((int, u_int32_t, u_int32_t));
296                                /* Delete default route through i/f */
297int  sifproxyarp __P((int, u_int32_t));
298                                /* Add proxy ARP entry for peer */
299int  cifproxyarp __P((int, u_int32_t));
300                                /* Delete proxy ARP entry for peer */
301u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */
302int  lock __P((char *));        /* Create lock file for device */
303void unlock __P((void));        /* Delete previously-created lock file */
304int  daemon __P((int, int));    /* Detach us from terminal session */
305void logwtmp __P((const char *, const char *, const char *));
306                                /* Write entry to wtmp file */
307int  get_host_seed __P((void)); /* Get host-dependent random number seed */
308#ifdef PPP_FILTER
309int  set_filters __P((struct bpf_program *pass, struct bpf_program *active));
310                                /* Set filter programs in kernel */
311#endif
312
313/* Procedures exported from options.c */
314int  parse_args __P((int argc, char **argv));
315                                /* Parse options from arguments given */
316void usage __P((void));         /* Print a usage message */
317int  options_from_file __P((char *filename, int must_exist, int check_prot,
318                            int privileged));
319                                /* Parse options from an options file */
320int  options_from_user __P((void)); /* Parse options from user's .ppprc */
321int  options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */
322void scan_args __P((int argc, char **argv));
323                                /* Look for tty name in command-line args */
324int  getword __P((FILE *f, char *word, int *newlinep, char *filename));
325                                /* Read a word from a file */
326void option_error __P((char *fmt, ...));
327                                /* Print an error message about an option */
328
329/*
330 * This structure is used to store information about certain
331 * options, such as where the option value came from (/etc/ppp/options,
332 * command line, etc.) and whether it came from a privileged source.
333 */
334
335struct option_info {
336    int     priv;               /* was value set by sysadmin? */
337    char    *source;            /* where option came from */
338};
339
340extern struct option_info auth_req_info;
341extern struct option_info connector_info;
342extern struct option_info disconnector_info;
343extern struct option_info welcomer_info;
344extern struct option_info devnam_info;
345
346/*
347 * Inline versions of get/put char/short/long.
348 * Pointer is advanced; we assume that both arguments
349 * are lvalues and will already be in registers.
350 * cp MUST be u_char *.
351 */
352#define GETCHAR(c, cp) { \
353        (c) = *(cp)++; \
354}
355#define PUTCHAR(c, cp) { \
356        *(cp)++ = (u_char) (c); \
357}
358
359
360#define GETSHORT(s, cp) { \
361        (s) = *(cp)++ << 8; \
362        (s) |= *(cp)++; \
363}
364#define PUTSHORT(s, cp) { \
365        *(cp)++ = (u_char) ((s) >> 8); \
366        *(cp)++ = (u_char) (s); \
367}
368
369#define GETLONG(l, cp) { \
370        (l) = *(cp)++ << 8; \
371        (l) |= *(cp)++; (l) <<= 8; \
372        (l) |= *(cp)++; (l) <<= 8; \
373        (l) |= *(cp)++; \
374}
375#define PUTLONG(l, cp) { \
376        *(cp)++ = (u_char) ((l) >> 24); \
377        *(cp)++ = (u_char) ((l) >> 16); \
378        *(cp)++ = (u_char) ((l) >> 8); \
379        *(cp)++ = (u_char) (l); \
380}
381
382#define INCPTR(n, cp)   ((cp) += (n))
383#define DECPTR(n, cp)   ((cp) -= (n))
384
385#undef  FALSE
386#define FALSE   0
387#undef  TRUE
388#define TRUE    1
389
390/*
391 * System dependent definitions for user-level 4.3BSD UNIX implementation.
392 */
393
394#define DEMUXPROTREJ(u, p)      demuxprotrej(u, p)
395
396#define TIMEOUT(r, f, t)        my_timeout((r), (f), (t))
397#define UNTIMEOUT(r, f)         untimeout((r), (f))
398
399#define BCOPY(s, d, l)          memcpy(d, s, l)
400#define BZERO(s, n)             memset(s, 0, n)
401#define EXIT(u)                 quit()
402
403#define PRINTMSG(m, l)  { m[l] = '\0'; syslog(LOG_INFO, "Remote message: %s", m); }
404
405/*
406 * MAKEHEADER - Add Header fields to a packet.
407 */
408#define MAKEHEADER(p, t) { \
409    PUTCHAR(PPP_ALLSTATIONS, p); \
410    PUTCHAR(PPP_UI, p); \
411    PUTSHORT(t, p); }
412
413/* #define DEBUGALL */
414
415#ifdef DEBUGALL
416#define DEBUGMAIN       1
417#define DEBUGFSM        1
418#define DEBUGLCP        1
419#define DEBUGIPCP       1
420#define DEBUGUPAP       1
421#define DEBUGCHAP       1
422#endif
423
424#ifndef LOG_PPP                 /* we use LOG_LOCAL2 for syslog by default */
425#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \
426  || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \
427  || defined(DEBUGCHAP) || defined(DEBUG)
428#define LOG_PPP LOG_LOCAL2
429#else
430#define LOG_PPP LOG_DAEMON
431#endif
432#endif /* LOG_PPP */
433extern rtems_id pppdaemon_tid;
434#ifdef DEBUGMAIN
435#define MAINDEBUG(x)    if (debug) syslog x
436#else
437#define MAINDEBUG(x)
438#endif
439
440#ifdef DEBUGSYS
441#define SYSDEBUG(x)     if (debug) syslog x
442#else
443#define SYSDEBUG(x)
444#endif
445
446#ifdef DEBUGFSM
447#define FSMDEBUG(x)     if (debug) syslog x
448#else
449#define FSMDEBUG(x)
450#endif
451
452#ifdef DEBUGLCP
453#define LCPDEBUG(x)     if (debug) syslog x
454#else
455#define LCPDEBUG(x)
456#endif
457
458#ifdef DEBUGIPCP
459#define IPCPDEBUG(x)    if (debug) syslog x
460#else
461#define IPCPDEBUG(x)
462#endif
463
464#ifdef DEBUGUPAP
465#define UPAPDEBUG(x)    if (debug) syslog x
466#else
467#define UPAPDEBUG(x)
468#endif
469
470#ifdef DEBUGCHAP
471#define CHAPDEBUG(x)    if (debug) syslog x
472#else
473#define CHAPDEBUG(x)
474#endif
475
476#ifdef DEBUGIPXCP
477#define IPXCPDEBUG(x)   if (debug) syslog x
478#else
479#define IPXCPDEBUG(x)
480#endif
481
482#ifndef SIGTYPE
483#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE)
484#define SIGTYPE void
485#else
486#define SIGTYPE int
487#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */
488#endif /* SIGTYPE */
489
490#ifndef MIN
491#define MIN(a, b)       ((a) < (b)? (a): (b))
492#endif
493#ifndef MAX
494#define MAX(a, b)       ((a) > (b)? (a): (b))
495#endif
496
497#endif /* __PPP_H__ */
Note: See TracBrowser for help on using the repository browser.