source: rtems/cpukit/pppd/example/ppp.conf @ 2f1b930

4.104.114.84.95
Last change on this file since 2f1b930 was 2f1b930, checked in by Joel Sherrill <joel.sherrill@…>, on 08/16/01 at 20:42:09

2001-08-16 Mike Siers <mikes@…>

  • Update of PPPD to 2.3.11 from 2.3.5 and addition of an example application. Mike's notes on the modifications:
    • renamed error() function because of namespace problems
    • removed calls to the exit() funciton
    • removed extra files from the pppd source directory
    • defined pppd task constant values in rtemspppd.h
    • modifyied example code to get actual tick per second value
    • placed the pppd 2.3.11 man page file (pppd.8) into the pppd directory
  • pppd/cbcp.c, pppd/cbcp.h, pppd/main.c, pppd/ppp_tty.c, pppd/pppmain.c, pppd/rtems-ppp.c, pppd/rtems-ppp.c: Deleted.
  • pppd/pppd.8, pppd/rtemsmain.c, pppd/rtemspppd.c, pppd/rtemspppd.h, pppd/sys-rtems.c, pppd/utils.c, pppd/example/Makefile, pppd/example/README, pppd/example/init.c, pppd/example/netconfig.h, pppd/example/ppp.conf, pppd/example/pppdapp.c, pppd/example/system.h: New files.
  • modem/ppp_tty.c, net/if_ppp.h, pppd/Makefile.am, pppd/README, pppd/STATUS, pppd/auth.c, pppd/ccp.c, pppd/ccp.h, pppd/chap.c, pppd/chap.h, pppd/chap_ms.c, pppd/chap_ms.h, pppd/chat.c, pppd/demand.c, pppd/fsm.c, pppd/fsm.h, pppd/ipcp.c, pppd/ipcp.h, pppd/ipxcp.c, pppd/ipxcp.h, pppd/lcp.c, pppd/lcp.h, pppd/magic.c, pppd/magic.h, pppd/options.c, pppd/patchlevel.h, pppd/pathnames.h, pppd/pppd.h, pppd/upap.c, pppd/upap.h: Modified.
  • Property mode set to 100644
File size: 655 bytes
Line 
1
2#
3# Example configuration file for setting up a ppp server
4#   using a null-modem serial cable:
5#
6#   Tested using ppp on OpenBSD 2.9
7#     - just follow instructions in man page for accepting
8#       ppp connections over the serial port
9#     - if pap and/or chap is enabled, you must have a ppp.secret
10#       file which will be used for user authentication
11#     - found useful to turn on syslog for ppp
12#
13
14default:
15 set log Phase Chat LQM LCP IPCP CCP command
16 set device /dev/cua00
17 set speed 57600
18 set ctsrts on
19 set dial ""
20
21openbsd-server:
22 set timeout 0
23 set ifaddr 192.168.2.100 192.168.2.123
24 enable dns
25 allow users
26 enable chap
27 enable pap
Note: See TracBrowser for help on using the repository browser.