source: rtems/cpukit/libpci/pci/cfg.h @ dc623099

/* PCI Configuration Library
 *
 * COPYRIGHT (c) 2010 Cobham Gaisler AB.
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rtems.com/license/LICENSE.
 */

/* Four versions of the library exists:
 *  - auto configuration (default)
 *  - read configuration from PnP (inherit BIOS set up)
 *  - static configuration (user defined config)
 *  - peripheral configuration, no CFG space accesses are possible instead a
 *    device tree known at compile-time have been built in.
 * all versions are defined through here.
 */

#ifndef __PCI_CFG_H__
#define __PCI_CFG_H__

#include <pci.h>

/* PCI Configuration library */

/* Return the number of PCI buses in system */
extern int pci_bus_count(void);

/* PCI Address assigned to BARs which failed to fit into the PCI Window or
 * is disabled by any other cause.
 */
extern uint32_t pci_invalid_address;

/* PCI Configuration Library of the system */
enum {
        PCI_CONFIG_LIB_NONE = 0,
        PCI_CONFIG_LIB_AUTO = 1,
        PCI_CONFIG_LIB_STATIC = 2,
        PCI_CONFIG_LIB_READ = 3,
        PCI_CONFIG_LIB_PERIPHERAL = 4,
};
extern const int pci_config_lib_type;

/* Configuration library function pointers, these are set in <rtems/confdefs.h>
 * by project configuration or by the BSP. The configuration will pull in the
 * PCI Library needed and the PCI initialization functions will call these
 * functions on initialization from the host driver.
 */
extern int (*pci_config_lib_init)(void);
extern void (*pci_config_lib_register)(void *config);

/* Configure PCI devices and bridges, and setup the RAM data structures
 * describing the PCI devices currently present in the system.
 *
 * Returns 0 on success, -1 on failure.
 */
extern int pci_config_init(void);

/* Register a config-library specific configuration used by the libarary in
 * pci_config_init().
 */
extern void pci_config_register(void *config);

/* Print current PCI configuration (C-code) to terminal, can be used in
 * static and peripheral PCI configuration library. The configuration is
 * taken from the current configuration library setup.
 */
extern void pci_cfg_print(void);

struct pci_bus; /* Bridge Device and secondary bus information */
struct pci_dev; /* Device/function */
struct pci_res; /* Resource: BAR, ROM or Bridge Window */

/* The Host Bridge and all subdevices (the PCI RAM data structure) */
extern struct pci_bus pci_hb;

/* Arguments for pci_for_each_child() search option */
#define SEARCH_CHILDREN 0       /* direct children of bus only  */
#define SEARCH_DEPTH 1          /* all children of bus */

/* Iterate over all PCI devices on a bus (see search options) and call func(),
 * iteration is stopped if a non-zero value is returned by func().
 *
 * The function iterates over the PCI RAM data structure, it is not
 * available until after all devices have been found and pci_hb is populated,
 * typically after pci_config_init() is called.
 *
 * search options: 0 (no child buses), 1 (depth first, recursive)
 *
 * Return Values
 *  0  All PCI devices were processed, func() returned 0 on every call
 *  X  func() returned non-zero X value, the search was stopped
 */
extern int pci_for_each_child(
        struct pci_bus *bus,
        int (*func)(struct pci_dev *, void *arg),
        void *arg,
        int search);

/* Depth first search of all PCI devices in PCI RAM data structure and call
 * func(dev, arg), iteration is stopped if a non-zero value is returned by
 * func().
 *
 * The function iterates over the PCI RAM data structure, it is not
 * available until after all devices have been found and pci_hb is populated,
 * typically after pci_config_init() is called.
 *
 * Return Values
 *  0  All PCI devices were processed, func() returned 0 on every call
 *  X  func() returned non-zero X value, the search was stopped
 */
extern int pci_for_each_dev(
        int (*func)(struct pci_dev *, void *arg),
        void *arg);

/* Get PCI device from RAM device tree for a device matching PCI Vendor, Device
 * and instance number 'index'.
 *
 * Return Values
 * -1  pci_find_dev did not find a device matching the criterion.
 *  0  device was found, *ppdev was updated with the PCI device address
 */
extern int pci_find_dev(uint16_t ven, uint16_t dev, int index,
                        struct pci_dev **ppdev);

/* Get PCI device from RAM device tree by BUS|SLOT|FUNC.
 *
 * Return Values
 * -1  pci_get_dev did not find a device matching the criterion
 *  0  device was found, *ppdev was updated with the PCI device address
 */
extern int pci_get_dev(pci_dev_t pcidev, struct pci_dev **ppdev);

/* Resource flags */
#define PCI_RES_IO 1
#define PCI_RES_MEMIO 2
#define PCI_RES_MEM_PREFETCH 1
#define PCI_RES_MEM (PCI_RES_MEMIO | PCI_RES_MEM_PREFETCH)
#define PCI_RES_TYPE_MASK 0x3
#define PCI_RES_IO32 0x08
#define PCI_RES_FAIL 0x10 /* Alloc Failed */

/* BAR Resouces entry */
struct pci_res {
        struct pci_res  *next;
        uint32_t        size;
        uint32_t        boundary;
        unsigned char   flags; /* I/O, MEM or MEMIO */
        unsigned char   bar;

        /* Assigned Resource (PCI address), zero if not assigned */
        uint32_t        start;
        uint32_t        end;
};

/* Get Device from resource pointer. bar is the index of the pci_dev.resources
 * array and used to get the device base address of which the resource is
 * associated with.
 */
#define RES2DEV(res) ((struct pci_dev *) \
        ((uintptr_t)res - (uintptr_t)(res->bar * (sizeof(struct pci_res)))))

/* Device flags */
#define PCI_DEV_BRIDGE    0x01  /* Device is a Bridge (struct pci_bus) */
#define PCI_DEV_RES_FAIL  0x02  /* Resource alloction for device BARs failed */

/* Bus Flags */
#define PCI_BUS_IO        0x01  /* 16-bit I/O address decoding */
#define PCI_BUS_MEMIO     0x02  /* Bus support non-prefetchable mem (always) */
#define PCI_BUS_MEM       0x04  /* Bus support prefetchable memory space */
#define PCI_BUS_IO32      0x08  /* 32-bit I/O address decoding */

#define BRIDGE_RES_COUNT 2 /* Number of BAR resources a bridge can have */
#define BUS_RES_START BRIDGE_RES_COUNT

/* Bus Resources Array */
enum {
        BUS_RES_IO = 0,
        BUS_RES_MEMIO = 1,
        BUS_RES_MEM = 2,
};

/* Device Resource array index meaning */
enum {
        /* A Device has up to 6 BARs and an optional ROM BAR */
        DEV_RES_BAR1 = 0,
        DEV_RES_BAR2 = 1,
        DEV_RES_BAR3 = 2,
        DEV_RES_BAR4 = 3,
        DEV_RES_BAR5 = 4,
        DEV_RES_BAR6 = 5,
        DEV_RES_ROM  = 6,

        /* Bridges have 2 BARs (BAR1 and BAR2) and 3 Windows to secondary bus
         * and an optional ROM BAR
         */
        BRIDGE_RES_BAR1 = 0,
        BRIDGE_RES_BAR2 = 1,
        BRIDGE_RES_IO = 2,
        BRIDGE_RES_MEMIO = 3,
        BRIDGE_RES_MEM = 4,
        BRIDGE_RES_UNUSED1 = 5,
        BRIDGE_RES_ROM = 6,
};

/* Maximum Number of Resources of a device */
#define DEV_RES_CNT (DEV_RES_ROM + 1)

/* PCI Device (Bus|Slot|Function) description */
struct pci_dev {
        struct pci_res  resources[DEV_RES_CNT]; /* must be topmost field */
        struct pci_dev  *next;
        struct pci_bus  *bus;
        pci_dev_t       busdevfun;
        uint8_t         flags;
        uint8_t         sysirq;
        uint16_t        vendor;
        uint16_t        device;
        uint16_t        subvendor;
        uint16_t        subdevice;
        uint32_t        classrev;

        /* static configuration settings */
        uint16_t        command;
};

/* PCI Bus description */
struct pci_bus {
        struct pci_dev  dev; /* PCI Bridge */
        struct pci_dev  *devs; /* Devices on child (secondary) Bus */
        unsigned int    flags;

        /* Bridge Information */
        int num;        /* Bus number (0=Root-PCI-bus) */
        int pri;        /* Primary Bus Number */
        int sord;       /* Subordinate Buses (Child bus count) */

#if defined(PCI_CFG_AUTO_LIB)
        /* Resources of devices on bus. USED INTERNALLY IN AUTO-CFG LIBRARY.
         *
         * BUS_RES_IO    = 0:  I/O resources
         * BUS_RES_MEMIO = 1:  Prefetchable memory resources
         * BUS_RES_MEM   = 2:  Non-Prefetchable memory resources
         */
        struct pci_res  *busres[3];
#endif
};

#include <pci/cfg_auto.h>
#include <pci/cfg_static.h>
#include <pci/cfg_read.h>
#include <pci/cfg_peripheral.h>

#endif