source: rtems/cpukit/include/rtems/score/profiling.h @ 878487b0

5
Last change on this file since 878487b0 was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 3.1 KB
Line 
1/**
2 * @file
3 *
4 * @ingroup ScoreProfiling
5 *
6 * @brief Profiling Support API
7 */
8
9/*
10 * Copyright (c) 2014 embedded brains GmbH.  All rights reserved.
11 *
12 *  embedded brains GmbH
13 *  Dornierstr. 4
14 *  82178 Puchheim
15 *  Germany
16 *  <rtems@embedded-brains.de>
17 *
18 * The license and distribution terms for this file may be
19 * found in the file LICENSE in this distribution or at
20 * http://www.rtems.org/license/LICENSE.
21 */
22
23#ifndef _RTEMS_SCORE_PROFILING
24#define _RTEMS_SCORE_PROFILING
25
26#include <rtems/score/percpu.h>
27#include <rtems/score/isrlock.h>
28
29#ifdef __cplusplus
30extern "C" {
31#endif /* __cplusplus */
32
33/**
34 * @defgroup ScoreProfiling Profiling Support
35 *
36 * @brief Profiling support.
37 *
38 * @{
39 */
40
41static inline void _Profiling_Thread_dispatch_disable(
42  Per_CPU_Control *cpu,
43  uint32_t previous_thread_dispatch_disable_level
44)
45{
46#if defined( RTEMS_PROFILING )
47  if ( previous_thread_dispatch_disable_level == 0 ) {
48    Per_CPU_Stats *stats = &cpu->Stats;
49
50    stats->thread_dispatch_disabled_instant = _CPU_Counter_read();
51    ++stats->thread_dispatch_disabled_count;
52  }
53#else
54  (void) cpu;
55  (void) previous_thread_dispatch_disable_level;
56#endif
57}
58
59static inline void _Profiling_Thread_dispatch_disable_critical(
60  Per_CPU_Control        *cpu,
61  uint32_t                previous_thread_dispatch_disable_level,
62  const ISR_lock_Context *lock_context
63)
64{
65#if defined( RTEMS_PROFILING )
66  if ( previous_thread_dispatch_disable_level == 0 ) {
67    Per_CPU_Stats *stats = &cpu->Stats;
68
69    stats->thread_dispatch_disabled_instant = lock_context->ISR_disable_instant;
70    ++stats->thread_dispatch_disabled_count;
71  }
72#else
73  (void) cpu;
74  (void) previous_thread_dispatch_disable_level;
75  (void) lock_context;
76#endif
77}
78
79static inline void _Profiling_Thread_dispatch_enable(
80  Per_CPU_Control *cpu,
81  uint32_t new_thread_dispatch_disable_level
82)
83{
84#if defined( RTEMS_PROFILING )
85  if ( new_thread_dispatch_disable_level == 0 ) {
86    Per_CPU_Stats *stats = &cpu->Stats;
87    CPU_Counter_ticks now = _CPU_Counter_read();
88    CPU_Counter_ticks delta = _CPU_Counter_difference(
89      now,
90      stats->thread_dispatch_disabled_instant
91    );
92
93    stats->total_thread_dispatch_disabled_time += delta;
94
95    if ( stats->max_thread_dispatch_disabled_time < delta ) {
96      stats->max_thread_dispatch_disabled_time = delta;
97    }
98  }
99#else
100  (void) cpu;
101  (void) new_thread_dispatch_disable_level;
102#endif
103}
104
105static inline void _Profiling_Update_max_interrupt_delay(
106  Per_CPU_Control *cpu,
107  CPU_Counter_ticks interrupt_delay
108)
109{
110#if defined( RTEMS_PROFILING )
111  Per_CPU_Stats *stats = &cpu->Stats;
112
113  if ( stats->max_interrupt_delay < interrupt_delay ) {
114    stats->max_interrupt_delay = interrupt_delay;
115  }
116#else
117  (void) cpu;
118  (void) interrupt_delay;
119#endif
120}
121
122/**
123 * @brief Updates the interrupt profiling statistics.
124 *
125 * Must be called with the interrupt stack and before the thread dispatch
126 * disable level is decremented.
127 */
128void _Profiling_Outer_most_interrupt_entry_and_exit(
129  Per_CPU_Control *cpu,
130  CPU_Counter_ticks interrupt_entry_instant,
131  CPU_Counter_ticks interrupt_exit_instant
132);
133
134/** @} */
135
136#ifdef __cplusplus
137}
138#endif /* __cplusplus */
139
140#endif /* _RTEMS_SCORE_PROFILING */
Note: See TracBrowser for help on using the repository browser.