source: rtems/cpukit/include/rtems/passwd.h @ e97806a

5
Last change on this file since e97806a was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 921 bytes
Line 
1/* Define a default password for telnetd here.
2 * NOTES:
3 *  - this can be overridden at run-time by setting
4 *    the "TELNETD_PASSWD" environment variable.
5 *    As soon as that variable is set, the new password
6 *    is effective - no need to restart telnetd.
7 *  - this must be set to an _encrypted_ password, NOT
8 *    the cleartext. Use the 'genpw' utility to generate
9 *    a password string:
10 *
11 *    1) Compile 'genpw.c' for the HOST, i.e.
12 *         cc -o genpw genpw.c -lcrypt
13 *    1) delete an old password definition from this file.
14 *    2) run './genpw >> passwd.h'. This will append
15 *       a new definition to this file.
16 *
17 *  - if no password is defined here, no authentication
18 *    is needed, i.e. telnet is open to the world.
19 *
20 *    T. Straumann <strauman@slac.stanford.edu>
21 */
22
23/* #undef TELNETD_DEFAULT_PASSWD */
24/* Default password: 'rtems' */
25#define TELNETD_DEFAULT_PASSWD "tduDcyLX12owo"
Note: See TracBrowser for help on using the repository browser.