source: rtems/c/src/tests/sptests/ChangeLog @ 848d015

Last change on this file since 848d015 was 848d015, checked in by Jennifer Averett <Jennifer.Averett@…>, on 11/22/04 at 22:34:36

2004-11-22 Jennifer Averett <jennifer@…>

  • sp07/buffered_io.c: Remove warning.
  • Property mode set to 100644
File size: 16.5 KB
Line 
12004-11-22      Jennifer Averett <jennifer@OARcorp.com>
2
3        * sp07/buffered_io.c: Remove warning.
4
52004-03-30      David Querbach <querbach@realtime.bc.ca>
6
7        PR 595/tests
8        * sp13/fillbuff.c, sp13/init.c, sp13/putbuff.c, sp13/system.h,
9        sp13/task1.c, sp13/task2.c: Fill_buffer() in fillbuff.c overruns the
10        supplied buffer due to confusion in the definition of MESSAGE_SIZE.
11        Some files in the sp13 test treat MESSAGE_SIZE as a count of bytes,
12        others treat it as a count of longs.
13
142004-03-30      David Querbach <querbach@realtime.bc.ca>
15
16        PR 596/tests
17        * sp32/init.c: A missing definition of TEST_INIT before including
18        <tmacros.h> means that buffered output will not work even if selected
19        in buffer_test_io.h.
20
212003-12-16      Joel Sherrill <joel@OARcorp.com>
22
23        PR 544/tests
24        * sp07/Makefile.am, sp07/init.c, sp07/system.h, sp07/task4.c,
25        sp07/tcreate.c, sp07/tdelete.c, sp07/trestart.c, sp07/tstart.c,
26        sp09/system.h, sp19/system.h, sp20/system.h: Various modifications to
27        make tests account for resources and not print at inappropriate
28        times.
29        * sp07/buffered_io.c: New file.
30
312003-09-04      Joel Sherrill <joel@OARcorp.com>
32
33        * sp01/init.c, sp01/sp01.doc, sp01/system.h, sp01/task1.c, sp02/init.c,
34        sp02/preempt.c, sp02/sp02.doc, sp02/system.h, sp02/task1.c,
35        sp02/task2.c, sp02/task3.c, sp03/init.c, sp03/sp03.doc,
36        sp03/system.h, sp03/task1.c, sp03/task2.c, sp04/init.c,
37        sp04/sp04.doc, sp04/system.h, sp04/task1.c, sp04/task2.c,
38        sp04/task3.c, sp04/tswitch.c, sp05/init.c, sp05/sp05.doc,
39        sp05/system.h, sp05/task1.c, sp05/task2.c, sp05/task3.c, sp06/init.c,
40        sp06/sp06.doc, sp06/system.h, sp06/task1.c, sp06/task2.c,
41        sp06/task3.c, sp07/init.c, sp07/sp07.doc, sp07/system.h,
42        sp07/task1.c, sp07/task2.c, sp07/task3.c, sp07/task4.c,
43        sp07/taskexit.c, sp07/tcreate.c, sp07/tdelete.c, sp07/trestart.c,
44        sp07/tstart.c, sp08/init.c, sp08/sp08.doc, sp08/system.h,
45        sp08/task1.c, sp09/delay.c, sp09/init.c, sp09/isr.c, sp09/screen01.c,
46        sp09/screen02.c, sp09/screen03.c, sp09/screen04.c, sp09/screen05.c,
47        sp09/screen06.c, sp09/screen07.c, sp09/screen08.c, sp09/screen09.c,
48        sp09/screen10.c, sp09/screen11.c, sp09/screen12.c, sp09/screen13.c,
49        sp09/screen14.c, sp09/sp09.doc, sp09/system.h, sp09/task1.c,
50        sp09/task2.c, sp09/task3.c, sp09/task4.c, sp11/init.c, sp11/sp11.doc,
51        sp11/system.h, sp11/task1.c, sp11/task2.c, sp11/timer.c, sp12/init.c,
52        sp12/pridrv.c, sp12/pritask.c, sp12/sp12.doc, sp12/system.h,
53        sp12/task1.c, sp12/task2.c, sp12/task3.c, sp12/task4.c, sp12/task5.c,
54        sp13/fillbuff.c, sp13/init.c, sp13/putbuff.c, sp13/sp13.doc,
55        sp13/system.h, sp13/task1.c, sp13/task2.c, sp13/task3.c, sp14/asr.c,
56        sp14/init.c, sp14/sp14.doc, sp14/system.h, sp14/task1.c,
57        sp14/task2.c, sp15/init.c, sp15/sp15.doc, sp15/system.h,
58        sp15/task1.c, sp16/init.c, sp16/sp16.doc, sp16/system.h,
59        sp16/task1.c, sp16/task2.c, sp16/task3.c, sp16/task4.c, sp16/task5.c,
60        sp17/asr.c, sp17/init.c, sp17/sp17.doc, sp17/system.h, sp17/task1.c,
61        sp17/task2.c, sp19/first.c, sp19/fptask.c, sp19/fptest.h,
62        sp19/init.c, sp19/inttest.h, sp19/sp19.doc, sp19/system.h,
63        sp19/task1.c, sp20/getall.c, sp20/init.c, sp20/sp20.doc,
64        sp20/system.h, sp20/task1.c, sp21/init.c, sp21/sp21.doc,
65        sp21/system.h, sp21/task1.c, sp22/delay.c, sp22/init.c,
66        sp22/prtime.c, sp22/sp22.doc, sp22/system.h, sp22/task1.c,
67        sp23/init.c, sp23/sp23.doc, sp23/system.h, sp23/task1.c, sp24/init.c,
68        sp24/resume.c, sp24/sp24.doc, sp24/system.h, sp24/task1.c,
69        sp25/init.c, sp25/sp25.doc, sp25/system.h, sp25/task1.c, sp26/init.c,
70        sp26/sp26.doc, sp26/system.h, sp26/task1.c, sp30/init.c,
71        sp30/resume.c, sp30/sp30.doc, sp30/system.h, sp30/task1.c,
72        sp31/delay.c, sp31/init.c, sp31/prtime.c, sp31/sp31.doc,
73        sp31/system.h, sp31/task1.c, sp32/init.c, spfatal/fatal.c,
74        spfatal/init.c, spfatal/puterr.c, spfatal/spfatal.doc,
75        spfatal/system.h, spfatal/task1.c, spsize/getint.c, spsize/init.c,
76        spsize/size.c, spsize/system.h: URL for license changed.
77
782003-08-18      Eiichiro Kawaguchi <e-kawaguchi@ct.jp.nec.com>
79
80        PR 458/tests
81        * sp30/task1.c: Correct indexing problem.
82
832003-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
84
85        * configure.ac: Use rtems-bugs@rtems.com as bug report email address.
86
872003-05-29      Joel Sherrill <joel@OARcorp.com>
88
89        * sp27/init.c, sp29/init.c, spsize/size.c: Removed warnings.
90
912003-05-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
92
93        * configure.ac: Remove CC_CFLAGS_DEBUG_V.
94        CC_CFLAGS_DEFAULT (obsolete).
95
962003-05-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
97
98        * configure.ac: Remove CC_CFLAGS_PROFILE_V.
99        Remove CC_LDFLAGS_PROFILE_V.
100
1012003-03-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
102
103        * configure.ac: Remove AC_CONFIG_AUX_DIR.
104
1052003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
106
107        * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
108
1092003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
110
111        * configure.ac: AC_PREREQ(2.57).
112
1132002-11-14      Joel Sherrill <joel@OARcorp.com>
114
115        * sp02/sp02.scn, sp15/sp15.scn, sp16/sp16.scn, sp20/sp20.scn,
116        sp22/sp22.scn, sp23/sp23.scn, sp25/sp25.scn, sp31/sp31.scn: Per PR239
117        update the IDs in the screens.
118
1192002-10-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
120
121        * .cvsignore: Reformat.
122        Add autom4te*cache.
123        Remove autom4te.cache.
124
1252002-09-14      Joel Sherrill <joel@OARcorp.com>
126
127        * sp32/.cvsignore: New file.
128
1292002-09-14      Aaron J. Grier <aaron@frye.com>
130
131        * PR271 was not applicable against the current source but included
132        a nice test that Joel decided to add to the tree as sp32.
133        * sp32/Makefile.am, sp32/init.c, sp32/sp32.scn: New file.
134        * Makefile.am, configure.ac: Modified to reflect addition.
135
1362002-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
137
138        * sp01/Makefile.am: Use $(OBJEXT) instead of .o.
139        * sp02/Makefile.am: Use $(OBJEXT) instead of .o.
140        * sp03/Makefile.am: Use $(OBJEXT) instead of .o.
141        * sp04/Makefile.am: Use $(OBJEXT) instead of .o.
142        * sp05/Makefile.am: Use $(OBJEXT) instead of .o.
143        * sp06/Makefile.am: Use $(OBJEXT) instead of .o.
144        * sp07/Makefile.am: Use $(OBJEXT) instead of .o.
145        * sp08/Makefile.am: Use $(OBJEXT) instead of .o.
146        * sp09/Makefile.am: Use $(OBJEXT) instead of .o.
147        * sp11/Makefile.am: Use $(OBJEXT) instead of .o.
148        * sp12/Makefile.am: Use $(OBJEXT) instead of .o.
149        * sp13/Makefile.am: Use $(OBJEXT) instead of .o.
150        * sp14/Makefile.am: Use $(OBJEXT) instead of .o.
151        * sp15/Makefile.am: Use $(OBJEXT) instead of .o.
152        * sp16/Makefile.am: Use $(OBJEXT) instead of .o.
153        * sp17/Makefile.am: Use $(OBJEXT) instead of .o.
154        * sp19/Makefile.am: Use $(OBJEXT) instead of .o.
155        * sp20/Makefile.am: Use $(OBJEXT) instead of .o.
156        * sp21/Makefile.am: Use $(OBJEXT) instead of .o.
157        * sp22/Makefile.am: Use $(OBJEXT) instead of .o.
158        * sp23/Makefile.am: Use $(OBJEXT) instead of .o.
159        * sp24/Makefile.am: Use $(OBJEXT) instead of .o.
160        * sp25/Makefile.am: Use $(OBJEXT) instead of .o.
161        * sp26/Makefile.am: Use $(OBJEXT) instead of .o.
162        * sp27/Makefile.am: Use $(OBJEXT) instead of .o.
163        * sp28/Makefile.am: Use $(OBJEXT) instead of .o.
164        * sp29/Makefile.am: Use $(OBJEXT) instead of .o.
165        * sp30/Makefile.am: Use $(OBJEXT) instead of .o.
166        * sp31/Makefile.am: Use $(OBJEXT) instead of .o.
167        * spfatal/Makefile.am: Use $(OBJEXT) instead of .o.
168        * spsize/Makefile.am: Use $(OBJEXT) instead of .o.
169
1702002-08-01      Joel Sherrill <joel@OARcorp.com>
171
172        * Per PR47 add support for buffered test output.  This involved
173        adding defines to redirect output to a buffer and dump it when
174        full, at "test pause", and at exit.  To avoid problems when redefining
175        exit(), all tests were modified to call rtems_test_exit().
176        Some tests, notable psxtests, had to be modified to include
177        the standard test macro .h file (pmacros.h or tmacros.h) to
178        enable this support.
179        * sp01/task1.c, sp02/task1.c, sp03/task2.c, sp04/task1.c, sp05/task1.c,
180        sp06/task1.c, sp07/taskexit.c, sp08/task1.c, sp09/task1.c,
181        sp11/task1.c, sp12/pritask.c, sp12/task5.c, sp13/task1.c,
182        sp14/task2.c, sp15/task1.c, sp16/task1.c, sp17/task1.c,
183        sp19/fptask.c, sp20/task1.c, sp21/task1.c, sp22/task1.c,
184        sp23/task1.c, sp24/task1.c, sp25/task1.c, sp26/init.c, sp26/task1.c,
185        sp30/task1.c, sp31/task1.c, spsize/init.c, spsize/size.c: Modified.
186
1872002-07-30      Joel Sherrill <joel@OARcorp.com>
188
189        * spsize/size.c: Don't reference the RTEMS allocated interrupt
190        stack if the port doesn't configure using it.
191
1922002-07-04      Joel Sherrill <joel@OARcorp.com>
193
194        * Jump table for single entry point removed.
195        * spsize/size.c:  Modified to reflect above.
196
1972002-07-01      Joel Sherrill <joel@OARcorp.com>
198
199        * sp29/init.c: Corrected definitions for task stack usage.
200
2012002-07-01      Joel Sherrill <joel@OARcorp.com>
202
203        * spsize/size.c: _Thread_queue_Extract_table removed.
204
2052001-05-17      Joel Sherrill <joel@OARcorp.com>
206
207        * sp21/task1.c (INVALID_DRIVER_MAJOR): Change definition to reflect
208        number of staticly configured device drivers.
209
2102001-05-14      Joel Sherrill <joel@OARcorp.com>
211
212        * sp21/task1.c: Correct INVALID_DRIVER_MAJOR so it is precisely 1 more
213        than the configured number of drivers.
214 
2152002-04-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
216
217        * configure.ac: Remove ENABLE_GCC28.
218
2192001-04-04      Joel Sherrill <joel@OARcorp.com>
220
221        * spsize/size.c: Reflect SPARC modifcation to get rid of
222        NO_TABLE_MOVE and references to  _CPU_Trap_Table_area.
223 
2242001-03-29      Joel Sherrill <joel@OARcorp.com>
225
226        * Per PR147 addressed problems when reseting and inserting a timer
227        into a timer chain that did not honor time passage since the last
228        time the timer server was scheduled and the new insertion.
229        * sp31/sp31.scn, sp31/task1.c: Added test code to detect this case.
230
2312001-03-28      Joel Sherrill <joel@OARcorp.com>
232
233        * Side-effect of PR132.
234        * sp21/system.h: Now must explicitly request NULL driver.
235
2362002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
237
238        * configure.ac:
239        AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
240        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
241        * sp01/Makefile.am: Remove AUTOMAKE_OPTIONS.
242        * sp02/Makefile.am: Remove AUTOMAKE_OPTIONS.
243        * Makefile.am: Remove AUTOMAKE_OPTIONS.
244        * sp03/Makefile.am: Remove AUTOMAKE_OPTIONS.
245        * sp04/Makefile.am: Remove AUTOMAKE_OPTIONS.
246        * sp05/Makefile.am: Remove AUTOMAKE_OPTIONS.
247        * sp06/Makefile.am: Remove AUTOMAKE_OPTIONS.
248        * sp07/Makefile.am: Remove AUTOMAKE_OPTIONS.
249        * sp08/Makefile.am: Remove AUTOMAKE_OPTIONS.
250        * sp09/Makefile.am: Remove AUTOMAKE_OPTIONS.
251        * sp11/Makefile.am: Remove AUTOMAKE_OPTIONS.
252        * sp12/Makefile.am: Remove AUTOMAKE_OPTIONS.
253        * sp13/Makefile.am: Remove AUTOMAKE_OPTIONS.
254        * sp14/Makefile.am: Remove AUTOMAKE_OPTIONS.
255        * sp15/Makefile.am: Remove AUTOMAKE_OPTIONS.
256        * sp16/Makefile.am: Remove AUTOMAKE_OPTIONS.
257        * sp17/Makefile.am: Remove AUTOMAKE_OPTIONS.
258        * sp19/Makefile.am: Remove AUTOMAKE_OPTIONS.
259        * sp20/Makefile.am: Remove AUTOMAKE_OPTIONS.
260        * sp21/Makefile.am: Remove AUTOMAKE_OPTIONS.
261        * sp22/Makefile.am: Remove AUTOMAKE_OPTIONS.
262        * sp23/Makefile.am: Remove AUTOMAKE_OPTIONS.
263        * sp24/Makefile.am: Remove AUTOMAKE_OPTIONS.
264        * sp25/Makefile.am: Remove AUTOMAKE_OPTIONS.
265        * sp26/Makefile.am: Remove AUTOMAKE_OPTIONS.
266        * sp27/Makefile.am: Remove AUTOMAKE_OPTIONS.
267        * sp28/Makefile.am: Remove AUTOMAKE_OPTIONS.
268        * sp29/Makefile.am: Remove AUTOMAKE_OPTIONS.
269        * sp30/Makefile.am: Remove AUTOMAKE_OPTIONS.
270        * sp31/Makefile.am: Remove AUTOMAKE_OPTIONS.
271        * spfatal/Makefile.am: Remove AUTOMAKE_OPTIONS.
272        * spsize/Makefile.am: Remove AUTOMAKE_OPTIONS.
273
2742002-03-20      Chris Johns <ccj@acm.org>
275
276        * PR145.
277        * sp04/task1.c, sp04/tswitch.c: Test fails if other tasks present
278        in system (e.g. driver tasks).  Also exit on minimum number of
279        switches not precise number.
280
2812001-01-29      Joel Sherrill <joel@OARcorp.com>
282
283        * Fixed bug where resetting a timer that was not at the head
284        of one of the task timer chains resulted in the Timer Server
285        task waking up too far in the future.
286        * Added rtems_timer_get_information() directive to support testing.
287        * sp31/init.c, sp31/system.h, sp31/task1.c: Modified to test for
288        above condition.
289
2902001-01-22      Joel Sherrill <joel@OARcorp.com>
291
292        * sp09/screen14.c, sp09/sp09.scn, sp30/init.c, sp31/init.c: Modified
293        because priority added as argument to rtems_timer_initiate_server().
294
2952001-01-16      Joel Sherrill <joel@OARcorp.com>
296
297        * Added tests for task-based timers.  This included the new tests
298        sp30 and sp31.
299        * Makefile.am, configure.ac: Modified to reflect new tests and files.
300        * sp09/screen14.c, sp09/sp09.scn: Modified to add error checks
301        for task-based timer services.
302        * sp30/.cvsignore, sp30/Makefile.am, sp30/init.c, sp30/resume.c,
303        sp30/sp30.doc, sp30/sp30.scn, sp30/system.h, sp30/task1.c,
304        sp31/.cvsignore, sp31/Makefile.am, sp31/delay.c, sp31/init.c,
305        sp31/prtime.c, sp31/sp31.doc, sp31/sp31.scn, sp31/system.h,
306        sp31/task1.c: New files.
307
3082001-11-01      Joel Sherrill <joel@OARcorp.com>
309
310        * sp26/system.h: Properly account for stack memory used by
311        this test. Reported by Jerry Needell <jerry.needell@unh.edu>
312        and processed as PR78.
313
3142001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
315
316        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
317        * configure.in: Remove.
318        * configure.ac: New file, generated from configure.in by autoupdate.
319
3202001-09-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
321
322        * sptests.am: Use TMPINSTALL_FILES = to make automake-1.5 happy.
323
3242001-09-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
325
326        * sp20/Makefile.am: include leaf.am instead of leaf.cfg.
327        * sp02/Makefile.am: include leaf.am instead of leaf.cfg.
328        * sp19/Makefile.am: include leaf.am instead of leaf.cfg.
329        * sp11/Makefile.am: include leaf.am instead of leaf.cfg.
330        * sp25/Makefile.am: include leaf.am instead of leaf.cfg.
331        * sp04/Makefile.am: include leaf.am instead of leaf.cfg.
332        * spsize/Makefile.am: include leaf.am instead of leaf.cfg.
333        * sp01/Makefile.am: include leaf.am instead of leaf.cfg.
334        * sp16/Makefile.am: include leaf.am instead of leaf.cfg.
335        * sp05/Makefile.am: include leaf.am instead of leaf.cfg.
336        * sp09/Makefile.am: include leaf.am instead of leaf.cfg.
337        * spfatal/Makefile.am: include leaf.am instead of leaf.cfg.
338        * sp06/Makefile.am: include leaf.am instead of leaf.cfg.
339        * sp23/Makefile.am: include leaf.am instead of leaf.cfg.
340        * sp28/Makefile.am: include leaf.am instead of leaf.cfg.
341        * sp03/Makefile.am: include leaf.am instead of leaf.cfg.
342        * sp29/Makefile.am: include leaf.am instead of leaf.cfg.
343        * sp13/Makefile.am: include leaf.am instead of leaf.cfg.
344        * sp27/Makefile.am: include leaf.am instead of leaf.cfg.
345        * sp14/Makefile.am: include leaf.am instead of leaf.cfg.
346        * sp07/Makefile.am: include leaf.am instead of leaf.cfg.
347        * sp15/Makefile.am: include leaf.am instead of leaf.cfg.
348        * sp17/Makefile.am: include leaf.am instead of leaf.cfg.
349        * sp22/Makefile.am: include leaf.am instead of leaf.cfg.
350        * sp12/Makefile.am: include leaf.am instead of leaf.cfg.
351        * sp26/Makefile.am: include leaf.am instead of leaf.cfg.
352        * sp21/Makefile.am: include leaf.am instead of leaf.cfg.
353        * sp24/Makefile.am: include leaf.am instead of leaf.cfg.
354        * sp08/Makefile.am: include leaf.am instead of leaf.cfg.
355
3562001-08-16      Joel Sherrill <joel@OARcorp.com>
357
358        * sp20/system.h: Account for extra task stacks properly.
359
3602001-08-16      Joel Sherrill <joel@OARcorp.com>
361
362        * sp13/sp13.scn: Id in screen had wrong class field value.
363        * sp13/system.h: Account for message buffer memory.
364        * sp13/task2.c: Remove unnecessary check for failure.
365
3662001-05-10      Ralf Corsepius  <corsepiu@faw.uni-ulm.de>
367
368        * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
369
3702001-04-20      Joel Sherrill <joel@OARcorp.com>
371
372        * sp298/sp28.scn: Minor adjustment so test output matches the screen
373        file.
374
3752001-02-07      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
376
377        * spsize/size.c: Use #if !defined(RTEMS_UNIX).
378
3792001-01-26      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
380
381        * sp21/Makefile.am: Remove libtest.
382
3832000-11-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
384
385        * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
386
3872000-11-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
388
389        * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
390
3912000-10-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
392
393        * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
394        Switch to GNU canonicalization.
395        * sptests.am: Remove DEFS.
396
3972000-09-29      Joel Sherrill <joel@OARcorp.com>
398
399        * sp20/sp20.scn: Corrected to reflect new addition.
400        * sp20/system.h: Removed comment reflecting history.
401
4022000-09-29      Stephan Merker <merker@decrc.abb.de>
403
404        * sp20/getall.c, sp20/init.c, sp20/system.h, sp20/task1.c:
405        Added new task to test sequence of altering a period's length
406        while it is still active.
407
4082000-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
409
410        * sp01/Makefile.am, sp02/Makefile.am, sp03/Makefile.am,
411        sp04/Makefile.am, sp05/Makefile.am, sp06/Makefile.am,
412        sp07/Makefile.am, sp08/Makefile.am, sp09/Makefile.am,
413        sp11/Makefile.am, sp12/Makefile.am, sp13/Makefile.am,
414        sp14/Makefile.am, sp15/Makefile.am, sp16/Makefile.am,
415        sp17/Makefile.am, sp19/Makefile.am, sp20/Makefile.am,
416        sp21/Makefile.am, sp22/Makefile.am, sp23/Makefile.am,
417        sp24/Makefile.am, sp25/Makefile.am, sp26/Makefile.am,
418        sp27/Makefile.am, sp28/Makefile.am, sp29/Makefile.am,
419        spfatal/Makefile.am, spsize/Makefile.am: Include compile.am
420
4212000-08-10      Joel Sherrill <joel@OARcorp.com>
422
423        * ChangeLog: New file.
Note: See TracBrowser for help on using the repository browser.