source: rtems/c/src/make/directory.cfg @ 4a238002

4.104.114.84.95
Last change on this file since 4a238002 was 29e68b75, checked in by Joel Sherrill <joel.sherrill@…>, on 07/26/99 at 21:26:44

Patch from Ralf Corsepius <corsepiu@…>:

This patch is an addition to "The big-patch"

CHANGES:

  • FIX: c/Makefile.am: bogus comment which changed the behavior of c/Makefile.am removed
  • FIX: make/custom/ts_i386ex.cfg did not set HAS_NETWORKING correctly (Me thinks it might have been me who added this bogus setting :-).
  • NEW: removing make targets get, protos, debug_install, profile_install
  • NEW: replacing clobber with distclean
  • NEW: Reimplement distclean and clean as reverse depth first make targets (adaptation to automake's behavior)
  • NEW: removing RCS_CLEAN from make distclean (tools/build/rcs_clean is still in - remove it?)
  • NEW: "$(RM) Makefile" added to make distclean (adaptation to automake's behavior)
  • NEW: "$(RM) config.cache config.log" to CLOBBER_ADDITIONS in [lib|exec|tests]/Makefile.in (adaptation to automake's behavior)
  • NEW: "$(CLEAN_PROTOS)" removed (Not used anywhere)
  • NEW: binpatch.c moved from i386 bsp tools to tools/build (AFAIS, binpatch is not specific to the pc386 BSP at all)
  • NEW: AC_EXEEXT added to all configure scripts which contain AC_PROG_CC (Cygwin support)
  • NEW/Experimental: An experimental implementation of temporary installation tree support in libbsp/i386/pc386/tools/Makefile.am, based on dependency tracking with make, instead of applying INSTALL_CHANGE.

REMARK:

  • This patch is small in size, but changes the behavior of "make clean|distclean|clobber" basically.
  • This patch does not alter building/compiling RTEMS, ie. there should be no need to rerun all "make all" building tests.

KNOWN BUGS:

  • make RTEMS_BSP="..." distclean in c/ runs "make distclean" in BSPs subdirectories passed through RTEMS_BSP and in "c/." only, but does not descend into other BSP subdirectories previously configured with different settings of make RTEMS_BSP="...". => Workaround: always use the same setting of RTEMS_BSP when working inside the build-tree.
  • "make [distclean|clean]" do not clean subdirectories, which have been configured at configuration time, but which are not used due to make-time configuration (e.g. macros/networking/rdgb subdirectories). This will problem will vanish by itself when migrating from make-time to configuration-time configuration

APPLYING THE PATCH

mv c/src/lib/libbsp/i386/pc386/tools/binpatch.c tools/build
patch -p1 < rtems-rc-19990709-2.diff
autogen

  • Property mode set to 100644
File size: 1.7 KB
Line 
1#
2#  $Id$
3#
4# make/directory.cfg
5#
6#   Make(1) configuration file include'd by all directory-level Makefile's.
7#
8#   See also make/main.cfg
9#
10
11# This is a simplified variant of automake-1.4's rule for handling
12# subdirectories
13$(RECURSE_TARGETS):
14        @set fnord $(MAKEFLAGS); amf=$$2; \
15        dot_seen=no; \
16        target=`echo $@ | sed -e s/-recursive// -e s/debug_// -e s/profile_// `; \
17        list='$(SUB_DIRS)'; for subdir in $$list; do \
18          echo "Making $$target in $$subdir"; \
19          local_target="$$target"; \
20          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
21           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
22        done && test -z "$$fail"
23
24
25# mostlyclean-recursive maintainer-clean-recursive:
26clean-recursive \
27distclean-recursive:
28        @set fnord $(MAKEFLAGS); amf=$$2; \
29        dot_seen=no; \
30        rev=''; list='$(SUB_DIRS)'; for subdir in $$list; do \
31          rev="$$subdir $$rev"; \
32          test "$$subdir" = "." && dot_seen=yes; \
33        done; \
34        test "$$dot_seen" = "no" && rev=". $$rev"; \
35        target=`echo $@ | sed s/-recursive//`; \
36        for subdir in $$rev; do \
37          echo "Making $$target in $$subdir"; \
38          if test "$$subdir" = "."; then \
39            local_target="$$target-am"; \
40          else \
41            local_target="$$target"; \
42          fi; \
43          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
44           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
45        done && test -z "$$fail"
46
47clean-am: clean-generic
48distclean-am: distclean-generic clean-am
49
50preinstall: preinstall-recursive
51.PHONY: preinstall preinstall-am preinstall-recursive
52
53distclean: distclean-recursive
54        -$(RM) config.status
55
56.PHONY: distclean distclean-am distclean-recursive
57
58clean: clean-recursive
59.PHONY: clean clean-am clean-recursive
60
Note: See TracBrowser for help on using the repository browser.