4.115
Last change
on this file since 602e395 was
9b4422a2,
checked in by Joel Sherrill <joel.sherrill@…>, on 05/03/12 at 15:09:24
|
Remove All CVS Id Strings Possible Using a Script
Script does what is expected and tries to do it as
smartly as possible.
+ remove occurrences of two blank comment lines
next to each other after Id string line removed.
+ remove entire comment blocks which only exited to
contain CVS Ids
+ If the processing left a blank line at the top of
a file, it was removed.
|
-
Property mode set to
100644
|
File size:
1.4 KB
|
Line | |
---|
1 | Configuration Table Use |
---|
2 | ======================= |
---|
3 | |
---|
4 | sDeviceName |
---|
5 | |
---|
6 | The name of this device. |
---|
7 | |
---|
8 | deviceType |
---|
9 | |
---|
10 | This field must be SERIAL_Z85C30. |
---|
11 | |
---|
12 | pDeviceFns |
---|
13 | |
---|
14 | The device interface control table. This may be: |
---|
15 | + z85c30_fns for interrupt driven IO |
---|
16 | + z85c30_fns_polled for polled IO |
---|
17 | |
---|
18 | deviceProbe |
---|
19 | |
---|
20 | This is the address of the routine which probes to see if the device |
---|
21 | is present. |
---|
22 | |
---|
23 | pDeviceFlow |
---|
24 | |
---|
25 | This field is set to one of the following values: |
---|
26 | + NULL for no hardware flow control |
---|
27 | + z85c30_flow_RTSCTS for RTS/CTS based flow control |
---|
28 | + z85c30_flow_DTRCTS for DTR/CTS based flow control |
---|
29 | |
---|
30 | ulMargin |
---|
31 | |
---|
32 | This is currently unused. |
---|
33 | |
---|
34 | ulHysteresis |
---|
35 | |
---|
36 | This is currently unused. |
---|
37 | |
---|
38 | pDeviceParams |
---|
39 | |
---|
40 | This is set to the default settings. |
---|
41 | |
---|
42 | ulCtrlPort1 |
---|
43 | |
---|
44 | This field is the address of the control register for this port. |
---|
45 | |
---|
46 | ulCtrlPort2 |
---|
47 | |
---|
48 | This field is the address of the control register for chip. |
---|
49 | |
---|
50 | ulDataPort |
---|
51 | |
---|
52 | This field is the address of the data register for this port. |
---|
53 | |
---|
54 | getRegister |
---|
55 | setRegister |
---|
56 | |
---|
57 | These follow standard conventions. |
---|
58 | |
---|
59 | getData |
---|
60 | setData |
---|
61 | |
---|
62 | These follow standard conventions. |
---|
63 | |
---|
64 | ulClock |
---|
65 | |
---|
66 | This is the clock speed of the baud rate clock. |
---|
67 | NULL, then the CSR/ACR/X bit mappings shown in the 68681 and 88681 |
---|
68 | manuals are used. Otherwise, the board specific baud rate mapping |
---|
69 | is used. |
---|
70 | |
---|
71 | ulIntVector |
---|
72 | |
---|
73 | This is the interrupt vector number associated with this chip. |
---|
74 | |
---|
Note: See
TracBrowser
for help on using the repository browser.