4.104.114.84.95
Last change
on this file since 27a66bd was
27a66bd,
checked in by Joel Sherrill <joel.sherrill@…>, on 07/15/98 at 23:15:49
|
Added information on the deviceType field.
|
-
Property mode set to
100644
|
File size:
1.4 KB
|
Rev | Line | |
---|
[80b1c2f] | 1 | # |
---|
| 2 | # $Id$ |
---|
| 3 | # |
---|
| 4 | |
---|
| 5 | Configuration Table Use |
---|
| 6 | ======================= |
---|
| 7 | |
---|
| 8 | sDeviceName |
---|
| 9 | |
---|
| 10 | The name of this device. |
---|
| 11 | |
---|
[27a66bd] | 12 | deviceType |
---|
| 13 | |
---|
| 14 | This field must be SERIAL_Z85C30. |
---|
| 15 | |
---|
[80b1c2f] | 16 | pDeviceFns |
---|
| 17 | |
---|
| 18 | The device interface control table. This may be: |
---|
| 19 | + z85c30_fns for interrupt driven IO |
---|
| 20 | + z85c30_fns_polled for polled IO |
---|
| 21 | |
---|
| 22 | deviceProbe |
---|
| 23 | |
---|
| 24 | This is the address of the routine which probes to see if the device |
---|
| 25 | is present. |
---|
| 26 | |
---|
| 27 | pDeviceFlow |
---|
| 28 | |
---|
| 29 | This field is set to one of the following values: |
---|
| 30 | + NULL for no hardware flow control |
---|
| 31 | + z85c30_flow_RTSCTS for RTS/CTS based flow control |
---|
| 32 | + z85c30_flow_DTRCTS for DTR/CTS based flow control |
---|
| 33 | |
---|
| 34 | ulMargin |
---|
| 35 | |
---|
| 36 | This is currently unused. |
---|
| 37 | |
---|
| 38 | ulHysteresis |
---|
| 39 | |
---|
| 40 | This is currently unused. |
---|
| 41 | |
---|
| 42 | pDeviceParams |
---|
| 43 | |
---|
| 44 | This is set to the default settings. |
---|
| 45 | |
---|
| 46 | ulCtrlPort1 |
---|
| 47 | |
---|
| 48 | This field is the address of the control register for this port. |
---|
| 49 | |
---|
| 50 | ulCtrlPort2 |
---|
| 51 | |
---|
| 52 | This field is the address of the control register for chip. |
---|
| 53 | |
---|
| 54 | ulDataPort |
---|
| 55 | |
---|
| 56 | This field is the address of the data register for this port. |
---|
| 57 | |
---|
| 58 | getRegister |
---|
| 59 | setRegister |
---|
| 60 | |
---|
| 61 | These follow standard conventions. |
---|
| 62 | |
---|
| 63 | getData |
---|
| 64 | setData |
---|
| 65 | |
---|
| 66 | These follow standard conventions. |
---|
| 67 | |
---|
| 68 | ulClock |
---|
| 69 | |
---|
| 70 | This is the clock speed of the baud rate clock. |
---|
| 71 | NULL, then the CSR/ACR/X bit mappings shown in the 68681 and 88681 |
---|
| 72 | manuals are used. Otherwise, the board specific baud rate mapping |
---|
| 73 | is used. |
---|
| 74 | |
---|
| 75 | ulIntVector |
---|
| 76 | |
---|
| 77 | This is the interrupt vector number associated with this chip. |
---|
| 78 | |
---|
Note: See
TracBrowser
for help on using the repository browser.